r346307 inadvertently started installing FDT_DTS_FILE along with the kernel. While this isn't necessarily bad, it was not intended or discussed and it actively breaks some current setups that don't anticipate any .dtb being installed when it's using static fdt. This change could be reconsidered down the line, but it needs to be done with prior discussion. Fix it by pushing FDT_DTS_FILE build down into the raw dtb.build.mk bits. This technically allows modules building DTS to accidentally specify an FDT_DTS_FILE that gets built but isn't otherwise useful (since it's not installed), but I suspect this isn't a big deal and would get caught with any kind of testing -- and perhaps this might end up useful in some other way, for example by some module wanting to embed fdt in some other way than our current/normal mechanism. Reported by: Mori Hiroki <yamori813@yahoo.co.jp> MFC after: 3 days X-MFC-With: r346307
482 lines
15 KiB
Makefile
482 lines
15 KiB
Makefile
# $FreeBSD$
|
|
|
|
# Part of a unified Makefile for building kernels. This part includes all
|
|
# the definitions that need to be after all the % directives except %RULES
|
|
# and ones that act like they are part of %RULES.
|
|
#
|
|
# Most make variables should not be defined in this file. Instead, they
|
|
# should be defined in the kern.pre.mk so that port makefiles can
|
|
# override or augment them.
|
|
|
|
.if defined(DTS) || defined(DTSO) || defined(FDT_DTS_FILE)
|
|
.include "dtb.build.mk"
|
|
|
|
KERNEL_EXTRA+= ${DTB} ${DTBO}
|
|
CLEAN+= ${DTB} ${DTBO}
|
|
|
|
kernel-install: _dtbinstall
|
|
.ORDER: beforeinstall _dtbinstall
|
|
.endif
|
|
|
|
# In case the config had a makeoptions DESTDIR...
|
|
.if defined(DESTDIR)
|
|
MKMODULESENV+= DESTDIR="${DESTDIR}"
|
|
.endif
|
|
SYSDIR?= ${S:C;^[^/];${.CURDIR}/&;:tA}
|
|
MKMODULESENV+= KERNBUILDDIR="${.CURDIR}" SYSDIR="${SYSDIR}"
|
|
MKMODULESENV+= MODULE_TIED=yes
|
|
|
|
.if defined(CONF_CFLAGS)
|
|
MKMODULESENV+= CONF_CFLAGS="${CONF_CFLAGS}"
|
|
.endif
|
|
|
|
.if defined(WITH_CTF)
|
|
MKMODULESENV+= WITH_CTF="${WITH_CTF}"
|
|
.endif
|
|
|
|
.if defined(WITH_EXTRA_TCP_STACKS)
|
|
MKMODULESENV+= WITH_EXTRA_TCP_STACKS="${WITH_EXTRA_TCP_STACKS}"
|
|
.endif
|
|
|
|
.if defined(SAN_CFLAGS)
|
|
MKMODULESENV+= SAN_CFLAGS="${SAN_CFLAGS}"
|
|
.endif
|
|
|
|
.if defined(GCOV_CFLAGS)
|
|
MKMODULESENV+= GCOV_CFLAGS="${GCOV_CFLAGS}"
|
|
.endif
|
|
|
|
# Allow overriding the kernel debug directory, so kernel and user debug may be
|
|
# installed in different directories. Setting it to "" restores the historical
|
|
# behavior of installing debug files in the kernel directory.
|
|
KERN_DEBUGDIR?= ${DEBUGDIR}
|
|
|
|
.MAIN: all
|
|
|
|
.if !defined(NO_MODULES)
|
|
# Default prefix used for modules installed from ports
|
|
LOCALBASE?= /usr/local
|
|
|
|
LOCAL_MODULES_DIR?= ${LOCALBASE}/sys/modules
|
|
|
|
# Default to installing all modules installed by ports unless overridden
|
|
# by the user.
|
|
.if !defined(LOCAL_MODULES) && exists($LOCAL_MODULES_DIR)
|
|
LOCAL_MODULES!= ls ${LOCAL_MODULES_DIR}
|
|
.endif
|
|
.endif
|
|
|
|
.for target in all clean cleandepend cleandir clobber depend install \
|
|
${_obj} reinstall tags
|
|
${target}: kernel-${target}
|
|
.if !defined(NO_MODULES)
|
|
${target}: modules-${target}
|
|
modules-${target}:
|
|
.if !defined(MODULES_WITH_WORLD) && exists($S/modules)
|
|
cd $S/modules; ${MKMODULESENV} ${MAKE} \
|
|
${target:S/^reinstall$/install/:S/^clobber$/cleandir/}
|
|
.endif
|
|
.for module in ${LOCAL_MODULES}
|
|
cd ${LOCAL_MODULES_DIR}/${module}; ${MKMODULESENV} ${MAKE} \
|
|
${target:S/^reinstall$/install/:S/^clobber$/cleandir/}
|
|
.endfor
|
|
.endif
|
|
.endfor
|
|
|
|
# Handle ports (as defined by the user) that build kernel modules
|
|
.if !defined(NO_MODULES) && defined(PORTS_MODULES)
|
|
#
|
|
# The ports tree needs some environment variables defined to match the new kernel
|
|
#
|
|
# SRC_BASE is how the ports tree refers to the location of the base source files
|
|
.if !defined(SRC_BASE)
|
|
SRC_BASE= ${SYSDIR:H:tA}
|
|
.endif
|
|
# OSVERSION is used by some ports to determine build options
|
|
.if !defined(OSRELDATE)
|
|
# Definition copied from src/Makefile.inc1
|
|
OSRELDATE!= awk '/^\#define[[:space:]]*__FreeBSD_version/ { print $$3 }' \
|
|
${MAKEOBJDIRPREFIX}${SRC_BASE}/include/osreldate.h
|
|
.endif
|
|
# Keep the related ports builds in the obj directory so that they are only rebuilt once per kernel build
|
|
#
|
|
# Ports search for some dependencies in PATH, so add the location of the
|
|
# installed files
|
|
WRKDIRPREFIX?= ${.OBJDIR}
|
|
PORTSMODULESENV=\
|
|
env \
|
|
-u CC \
|
|
-u CXX \
|
|
-u CPP \
|
|
-u MAKESYSPATH \
|
|
-u MK_AUTO_OBJ \
|
|
-u MAKEOBJDIR \
|
|
MAKEFLAGS="${MAKEFLAGS:M*:tW:S/^-m /-m_/g:S/ -m / -m_/g:tw:N-m_*:NMK_AUTO_OBJ=*}" \
|
|
SYSDIR=${SYSDIR} \
|
|
PATH=${PATH}:${LOCALBASE}/bin:${LOCALBASE}/sbin \
|
|
SRC_BASE=${SRC_BASE} \
|
|
OSVERSION=${OSRELDATE} \
|
|
WRKDIRPREFIX=${WRKDIRPREFIX}
|
|
|
|
# The WRKDIR needs to be cleaned before building, and trying to change the target
|
|
# with a :C pattern below results in install -> instclean
|
|
all:
|
|
.for __i in ${PORTS_MODULES}
|
|
@${ECHO} "===> Ports module ${__i} (all)"
|
|
cd $${PORTSDIR:-/usr/ports}/${__i}; ${PORTSMODULESENV} ${MAKE} -B clean build
|
|
.endfor
|
|
|
|
.for __target in install reinstall clean
|
|
${__target}: ports-${__target}
|
|
ports-${__target}:
|
|
.for __i in ${PORTS_MODULES}
|
|
@${ECHO} "===> Ports module ${__i} (${__target})"
|
|
cd $${PORTSDIR:-/usr/ports}/${__i}; ${PORTSMODULESENV} ${MAKE} -B ${__target:C/(re)?install/deinstall reinstall/}
|
|
.endfor
|
|
.endfor
|
|
.endif
|
|
|
|
.ORDER: kernel-install modules-install
|
|
|
|
beforebuild: .PHONY
|
|
kernel-all: beforebuild .WAIT ${KERNEL_KO} ${KERNEL_EXTRA}
|
|
|
|
kernel-cleandir: kernel-clean kernel-cleandepend
|
|
|
|
kernel-clobber:
|
|
find . -maxdepth 1 ! -type d ! -name version -delete
|
|
|
|
kernel-obj:
|
|
|
|
.if !defined(NO_MODULES)
|
|
modules: modules-all
|
|
modules-depend: beforebuild
|
|
modules-all: beforebuild
|
|
|
|
.if !defined(NO_MODULES_OBJ)
|
|
modules-all modules-depend: modules-obj
|
|
.endif
|
|
.endif
|
|
|
|
.if !defined(DEBUG)
|
|
FULLKERNEL= ${KERNEL_KO}
|
|
.else
|
|
FULLKERNEL= ${KERNEL_KO}.full
|
|
${KERNEL_KO}: ${FULLKERNEL} ${KERNEL_KO}.debug
|
|
${OBJCOPY} --strip-debug --add-gnu-debuglink=${KERNEL_KO}.debug \
|
|
${FULLKERNEL} ${.TARGET}
|
|
${KERNEL_KO}.debug: ${FULLKERNEL}
|
|
${OBJCOPY} --only-keep-debug ${FULLKERNEL} ${.TARGET}
|
|
install.debug reinstall.debug: gdbinit
|
|
cd ${.CURDIR}; ${MAKE} ${.TARGET:R}
|
|
|
|
# Install gdbinit files for kernel debugging.
|
|
gdbinit:
|
|
grep -v '# XXX' ${S}/../tools/debugscripts/dot.gdbinit | \
|
|
sed "s:MODPATH:${.OBJDIR}/modules:" > .gdbinit
|
|
cp ${S}/../tools/debugscripts/gdbinit.kernel ${.CURDIR}
|
|
.if exists(${S}/../tools/debugscripts/gdbinit.${MACHINE_CPUARCH})
|
|
cp ${S}/../tools/debugscripts/gdbinit.${MACHINE_CPUARCH} \
|
|
${.CURDIR}/gdbinit.machine
|
|
.endif
|
|
.endif
|
|
|
|
${FULLKERNEL}: ${SYSTEM_DEP} vers.o
|
|
@rm -f ${.TARGET}
|
|
@echo linking ${.TARGET}
|
|
${SYSTEM_LD}
|
|
.if !empty(MD_ROOT_SIZE_CONFIGURED) && defined(MFS_IMAGE)
|
|
@sh ${S}/tools/embed_mfs.sh ${.TARGET} ${MFS_IMAGE}
|
|
.endif
|
|
.if ${MK_CTF} != "no"
|
|
@echo ${CTFMERGE} ${CTFFLAGS} -o ${.TARGET} ...
|
|
@${CTFMERGE} ${CTFFLAGS} -o ${.TARGET} ${SYSTEM_OBJS} vers.o
|
|
.endif
|
|
.if !defined(DEBUG)
|
|
${OBJCOPY} --strip-debug ${.TARGET}
|
|
.endif
|
|
${SYSTEM_LD_TAIL}
|
|
|
|
OBJS_DEPEND_GUESS+= offset.inc assym.inc vnode_if.h ${BEFORE_DEPEND:M*.h} \
|
|
${MFILES:T:S/.m$/.h/}
|
|
|
|
.for mfile in ${MFILES}
|
|
# XXX the low quality .m.o rules gnerated by config are normally used
|
|
# instead of the .m.c rules here.
|
|
${mfile:T:S/.m$/.c/}: ${mfile}
|
|
${AWK} -f $S/tools/makeobjops.awk ${mfile} -c
|
|
${mfile:T:S/.m$/.h/}: ${mfile}
|
|
${AWK} -f $S/tools/makeobjops.awk ${mfile} -h
|
|
.endfor
|
|
|
|
kernel-clean:
|
|
rm -f *.o *.so *.pico *.ko *.s eddep errs \
|
|
${FULLKERNEL} ${KERNEL_KO} ${KERNEL_KO}.debug \
|
|
tags vers.c \
|
|
vnode_if.c vnode_if.h vnode_if_newproto.h vnode_if_typedef.h \
|
|
${MFILES:T:S/.m$/.c/} ${MFILES:T:S/.m$/.h/} \
|
|
${CLEAN}
|
|
|
|
# This is a hack. BFD "optimizes" away dynamic mode if there are no
|
|
# dynamic references. We could probably do a '-Bforcedynamic' mode like
|
|
# in the a.out ld. For now, this works.
|
|
HACK_EXTRA_FLAGS?= -shared
|
|
hack.pico: Makefile
|
|
:> hack.c
|
|
${CC} ${HACK_EXTRA_FLAGS} -nostdlib hack.c -o hack.pico
|
|
rm -f hack.c
|
|
|
|
offset.inc: $S/kern/genoffset.sh genoffset.o
|
|
NM='${NM}' NMFLAGS='${NMFLAGS}' sh $S/kern/genoffset.sh genoffset.o > ${.TARGET}
|
|
|
|
genoffset.o: $S/kern/genoffset.c
|
|
${CC} -c ${CFLAGS:N-flto:N-fno-common} $S/kern/genoffset.c
|
|
|
|
# genoffset_test.o is not actually used for anything - the point of compiling it
|
|
# is to exercise the CTASSERT that checks that the offsets in the offset.inc
|
|
# _lite struct(s) match those in the original(s).
|
|
genoffset_test.o: $S/kern/genoffset.c offset.inc
|
|
${CC} -c ${CFLAGS:N-flto:N-fno-common} -DOFFSET_TEST \
|
|
$S/kern/genoffset.c -o ${.TARGET}
|
|
|
|
assym.inc: $S/kern/genassym.sh genassym.o genoffset_test.o
|
|
NM='${NM}' NMFLAGS='${NMFLAGS}' sh $S/kern/genassym.sh genassym.o > ${.TARGET}
|
|
|
|
genassym.o: $S/$M/$M/genassym.c offset.inc
|
|
${CC} -c ${CFLAGS:N-flto:N-fno-common} $S/$M/$M/genassym.c
|
|
|
|
OBJS_DEPEND_GUESS+= opt_global.h
|
|
genoffset.o genassym.o vers.o: opt_global.h
|
|
|
|
.if !empty(.MAKE.MODE:Unormal:Mmeta) && empty(.MAKE.MODE:Unormal:Mnofilemon)
|
|
_meta_filemon= 1
|
|
.endif
|
|
# Skip reading .depend when not needed to speed up tree-walks and simple
|
|
# lookups. For install, only do this if no other targets are specified.
|
|
# Also skip generating or including .depend.* files if in meta+filemon mode
|
|
# since it will track dependencies itself. OBJS_DEPEND_GUESS is still used
|
|
# for _meta_filemon but not for _SKIP_DEPEND.
|
|
.if !defined(NO_SKIP_DEPEND) && \
|
|
((!empty(.MAKEFLAGS:M-V) && empty(.MAKEFLAGS:M*DEP*)) || \
|
|
${.TARGETS:M*obj} == ${.TARGETS} || \
|
|
${.TARGETS:M*clean*} == ${.TARGETS} || \
|
|
${.TARGETS:M*install*} == ${.TARGETS})
|
|
_SKIP_DEPEND= 1
|
|
.endif
|
|
.if defined(_SKIP_DEPEND) || defined(_meta_filemon)
|
|
.MAKE.DEPENDFILE= /dev/null
|
|
.endif
|
|
|
|
kernel-depend: .depend
|
|
SRCS= assym.inc offset.inc vnode_if.h ${BEFORE_DEPEND} ${CFILES} \
|
|
${SYSTEM_CFILES} ${GEN_CFILES} ${SFILES} \
|
|
${MFILES:T:S/.m$/.h/}
|
|
DEPENDOBJS+= ${SYSTEM_OBJS} genassym.o genoffset.o genoffset_test.o
|
|
DEPENDOBJS+= ${CLEAN:M*.o}
|
|
DEPENDFILES= ${DEPENDOBJS:O:u:C/^/.depend./}
|
|
.if ${MAKE_VERSION} < 20160220
|
|
DEPEND_MP?= -MP
|
|
.endif
|
|
.if defined(_SKIP_DEPEND)
|
|
# Don't bother reading any .meta files
|
|
${DEPENDOBJS}: .NOMETA
|
|
.depend: .NOMETA
|
|
# Unset these to avoid looping/statting on them later.
|
|
.undef DEPENDOBJS
|
|
.undef DEPENDFILES
|
|
.endif # defined(_SKIP_DEPEND)
|
|
DEPEND_CFLAGS+= -MD ${DEPEND_MP} -MF.depend.${.TARGET}
|
|
DEPEND_CFLAGS+= -MT${.TARGET}
|
|
.if !defined(_meta_filemon)
|
|
.if !empty(DEPEND_CFLAGS)
|
|
# Only add in DEPEND_CFLAGS for CFLAGS on files we expect from DEPENDOBJS
|
|
# as those are the only ones we will include.
|
|
DEPEND_CFLAGS_CONDITION= "${DEPENDOBJS:M${.TARGET}}" != ""
|
|
CFLAGS+= ${${DEPEND_CFLAGS_CONDITION}:?${DEPEND_CFLAGS}:}
|
|
.endif
|
|
.for __depend_obj in ${DEPENDFILES}
|
|
.if ${MAKE_VERSION} < 20160220
|
|
.sinclude "${.OBJDIR}/${__depend_obj}"
|
|
.else
|
|
.dinclude "${.OBJDIR}/${__depend_obj}"
|
|
.endif
|
|
.endfor
|
|
.endif # !defined(_meta_filemon)
|
|
|
|
# Always run 'make depend' to generate dependencies early and to avoid the
|
|
# need for manually running it. For the kernel this is mostly a NOP since
|
|
# all dependencies are correctly added or accounted for. This is mostly to
|
|
# ensure downstream uses of kernel-depend are handled.
|
|
beforebuild: kernel-depend
|
|
|
|
# Guess some dependencies for when no ${DEPENDFILE}.OBJ is generated yet.
|
|
# For meta+filemon the .meta file is checked for since it is the dependency
|
|
# file used.
|
|
.for __obj in ${DEPENDOBJS:O:u}
|
|
.if defined(_meta_filemon)
|
|
_depfile= ${.OBJDIR}/${__obj}.meta
|
|
.else
|
|
_depfile= ${.OBJDIR}/.depend.${__obj}
|
|
.endif
|
|
.if !exists(${_depfile})
|
|
.if ${SYSTEM_OBJS:M${__obj}}
|
|
${__obj}: ${OBJS_DEPEND_GUESS}
|
|
.endif
|
|
${__obj}: ${OBJS_DEPEND_GUESS.${__obj}}
|
|
.elif defined(_meta_filemon)
|
|
# For meta mode we still need to know which file to depend on to avoid
|
|
# ambiguous suffix transformation rules from .PATH. Meta mode does not
|
|
# use .depend files. We really only need source files, not headers since
|
|
# they are typically in SRCS/beforebuild already. For target-specific
|
|
# guesses do include headers though since they may not be in SRCS.
|
|
.if ${SYSTEM_OBJS:M${__obj}}
|
|
${__obj}: ${OBJS_DEPEND_GUESS:N*.h}
|
|
.endif
|
|
${__obj}: ${OBJS_DEPEND_GUESS.${__obj}}
|
|
.endif # !exists(${_depfile})
|
|
.endfor
|
|
|
|
.NOPATH: .depend ${DEPENDFILES}
|
|
|
|
.depend: .PRECIOUS ${SRCS}
|
|
|
|
.if ${COMPILER_TYPE} == "clang" || \
|
|
(${COMPILER_TYPE} == "gcc" && ${COMPILER_VERSION} >= 60000)
|
|
_MAP_DEBUG_PREFIX= yes
|
|
.endif
|
|
|
|
_ILINKS= machine
|
|
.if ${MACHINE} != ${MACHINE_CPUARCH} && ${MACHINE} != "arm64"
|
|
_ILINKS+= ${MACHINE_CPUARCH}
|
|
.endif
|
|
.if ${MACHINE_CPUARCH} == "i386" || ${MACHINE_CPUARCH} == "amd64"
|
|
_ILINKS+= x86
|
|
.endif
|
|
|
|
# Ensure that the link exists without depending on it when it exists.
|
|
# Ensure that debug info references the path in the source tree.
|
|
.for _link in ${_ILINKS}
|
|
.if !exists(${.OBJDIR}/${_link})
|
|
${SRCS} ${CLEAN:M*.o}: ${_link}
|
|
.endif
|
|
.if defined(_MAP_DEBUG_PREFIX)
|
|
.if ${_link} == "machine"
|
|
CFLAGS+= -fdebug-prefix-map=./machine=${SYSDIR}/${MACHINE}/include
|
|
.else
|
|
CFLAGS+= -fdebug-prefix-map=./${_link}=${SYSDIR}/${_link}/include
|
|
.endif
|
|
.endif
|
|
.endfor
|
|
|
|
${_ILINKS}:
|
|
@case ${.TARGET} in \
|
|
machine) \
|
|
path=${S}/${MACHINE}/include ;; \
|
|
*) \
|
|
path=${S}/${.TARGET}/include ;; \
|
|
esac ; \
|
|
${ECHO} ${.TARGET} "->" $$path ; \
|
|
ln -fns $$path ${.TARGET}
|
|
|
|
# .depend needs include links so we remove them only together.
|
|
kernel-cleandepend: .PHONY
|
|
rm -f .depend .depend.* ${_ILINKS}
|
|
|
|
kernel-tags:
|
|
@[ -f .depend ] || { echo "you must make depend first"; exit 1; }
|
|
sh $S/conf/systags.sh
|
|
|
|
kernel-install: .PHONY
|
|
@if [ ! -f ${KERNEL_KO} ] ; then \
|
|
echo "You must build a kernel first." ; \
|
|
exit 1 ; \
|
|
fi
|
|
.if exists(${DESTDIR}${KODIR})
|
|
-thiskernel=`sysctl -n kern.bootfile` ; \
|
|
if [ ! "`dirname "$$thiskernel"`" -ef ${DESTDIR}${KODIR} ] ; then \
|
|
chflags -R noschg ${DESTDIR}${KODIR} ; \
|
|
rm -rf ${DESTDIR}${KODIR} ; \
|
|
rm -rf ${DESTDIR}${KERN_DEBUGDIR}${KODIR} ; \
|
|
else \
|
|
if [ -d ${DESTDIR}${KODIR}.old ] ; then \
|
|
chflags -R noschg ${DESTDIR}${KODIR}.old ; \
|
|
rm -rf ${DESTDIR}${KODIR}.old ; \
|
|
fi ; \
|
|
mv ${DESTDIR}${KODIR} ${DESTDIR}${KODIR}.old ; \
|
|
if [ -n "${KERN_DEBUGDIR}" -a \
|
|
-d ${DESTDIR}${KERN_DEBUGDIR}${KODIR} ]; then \
|
|
rm -rf ${DESTDIR}${KERN_DEBUGDIR}${KODIR}.old ; \
|
|
mv ${DESTDIR}${KERN_DEBUGDIR}${KODIR} ${DESTDIR}${KERN_DEBUGDIR}${KODIR}.old ; \
|
|
fi ; \
|
|
sysctl kern.bootfile=${DESTDIR}${KODIR}.old/"`basename "$$thiskernel"`" ; \
|
|
fi
|
|
.endif
|
|
mkdir -p ${DESTDIR}${KODIR}
|
|
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO} ${DESTDIR}${KODIR}/
|
|
.if defined(DEBUG) && !defined(INSTALL_NODEBUG) && ${MK_KERNEL_SYMBOLS} != "no"
|
|
mkdir -p ${DESTDIR}${KERN_DEBUGDIR}${KODIR}
|
|
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO}.debug ${DESTDIR}${KERN_DEBUGDIR}${KODIR}/
|
|
.endif
|
|
.if defined(KERNEL_EXTRA_INSTALL)
|
|
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_EXTRA_INSTALL} ${DESTDIR}${KODIR}/
|
|
.endif
|
|
|
|
|
|
|
|
kernel-reinstall:
|
|
@-chflags -R noschg ${DESTDIR}${KODIR}
|
|
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO} ${DESTDIR}${KODIR}/
|
|
.if defined(DEBUG) && !defined(INSTALL_NODEBUG) && ${MK_KERNEL_SYMBOLS} != "no"
|
|
${INSTALL} -p -m 555 -o ${KMODOWN} -g ${KMODGRP} ${KERNEL_KO}.debug ${DESTDIR}${KERN_DEBUGDIR}${KODIR}/
|
|
.endif
|
|
|
|
config.o env.o hints.o vers.o vnode_if.o:
|
|
${NORMAL_C}
|
|
${NORMAL_CTFCONVERT}
|
|
|
|
.if ${MK_REPRODUCIBLE_BUILD} != "no"
|
|
REPRO_FLAG="-R"
|
|
.endif
|
|
vers.c: $S/conf/newvers.sh $S/sys/param.h ${SYSTEM_DEP}
|
|
MAKE="${MAKE}" sh $S/conf/newvers.sh ${REPRO_FLAG} ${KERN_IDENT}
|
|
|
|
vnode_if.c: $S/tools/vnode_if.awk $S/kern/vnode_if.src
|
|
${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -c
|
|
|
|
vnode_if.h vnode_if_newproto.h vnode_if_typedef.h: $S/tools/vnode_if.awk \
|
|
$S/kern/vnode_if.src
|
|
vnode_if.h: vnode_if_newproto.h vnode_if_typedef.h
|
|
${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -h
|
|
vnode_if_newproto.h:
|
|
${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -p
|
|
vnode_if_typedef.h:
|
|
${AWK} -f $S/tools/vnode_if.awk $S/kern/vnode_if.src -q
|
|
|
|
.if ${MFS_IMAGE:Uno} != "no"
|
|
.if empty(MD_ROOT_SIZE_CONFIGURED)
|
|
# Generate an object file from the file system image to embed in the kernel
|
|
# via linking. Make sure the contents are in the mfs section and rename the
|
|
# start/end/size variables to __start_mfs, __stop_mfs, and mfs_size,
|
|
# respectively.
|
|
embedfs_${MFS_IMAGE:T:R}.o: ${MFS_IMAGE}
|
|
${OBJCOPY} --input-target binary \
|
|
--output-target ${EMBEDFS_FORMAT.${MACHINE_ARCH}} \
|
|
--binary-architecture ${EMBEDFS_ARCH.${MACHINE_ARCH}} \
|
|
${MFS_IMAGE} ${.TARGET}
|
|
${OBJCOPY} \
|
|
--rename-section .data=mfs,contents,alloc,load,readonly,data \
|
|
--redefine-sym \
|
|
_binary_${MFS_IMAGE:C,[^[:alnum:]],_,g}_size=__mfs_root_size \
|
|
--redefine-sym \
|
|
_binary_${MFS_IMAGE:C,[^[:alnum:]],_,g}_start=mfs_root \
|
|
--redefine-sym \
|
|
_binary_${MFS_IMAGE:C,[^[:alnum:]],_,g}_end=mfs_root_end \
|
|
${.TARGET}
|
|
.endif
|
|
.endif
|
|
|
|
# XXX strictly, everything depends on Makefile because changes to ${PROF}
|
|
# only appear there, but we don't handle that.
|
|
|
|
.include "kern.mk"
|