freebsd-dev/module/zfs/zio_inject.c
Brian Behlendorf c409e4647f Add missing ZFS tunables
This commit adds module options for all existing zfs tunables.
Ideally the average user should never need to modify any of these
values.  However, in practice sometimes you do need to tweak these
values for one reason or another.  In those cases it's nice not to
have to resort to rebuilding from source.  All tunables are visable
to modinfo and the list is as follows:

$ modinfo module/zfs/zfs.ko
filename:       module/zfs/zfs.ko
license:        CDDL
author:         Sun Microsystems/Oracle, Lawrence Livermore National Laboratory
description:    ZFS
srcversion:     8EAB1D71DACE05B5AA61567
depends:        spl,znvpair,zcommon,zunicode,zavl
vermagic:       2.6.32-131.0.5.el6.x86_64 SMP mod_unload modversions
parm:           zvol_major:Major number for zvol device (uint)
parm:           zvol_threads:Number of threads for zvol device (uint)
parm:           zio_injection_enabled:Enable fault injection (int)
parm:           zio_bulk_flags:Additional flags to pass to bulk buffers (int)
parm:           zio_delay_max:Max zio millisec delay before posting event (int)
parm:           zio_requeue_io_start_cut_in_line:Prioritize requeued I/O (bool)
parm:           zil_replay_disable:Disable intent logging replay (int)
parm:           zfs_nocacheflush:Disable cache flushes (bool)
parm:           zfs_read_chunk_size:Bytes to read per chunk (long)
parm:           zfs_vdev_max_pending:Max pending per-vdev I/Os (int)
parm:           zfs_vdev_min_pending:Min pending per-vdev I/Os (int)
parm:           zfs_vdev_aggregation_limit:Max vdev I/O aggregation size (int)
parm:           zfs_vdev_time_shift:Deadline time shift for vdev I/O (int)
parm:           zfs_vdev_ramp_rate:Exponential I/O issue ramp-up rate (int)
parm:           zfs_vdev_read_gap_limit:Aggregate read I/O over gap (int)
parm:           zfs_vdev_write_gap_limit:Aggregate write I/O over gap (int)
parm:           zfs_vdev_scheduler:I/O scheduler (charp)
parm:           zfs_vdev_cache_max:Inflate reads small than max (int)
parm:           zfs_vdev_cache_size:Total size of the per-disk cache (int)
parm:           zfs_vdev_cache_bshift:Shift size to inflate reads too (int)
parm:           zfs_scrub_limit:Max scrub/resilver I/O per leaf vdev (int)
parm:           zfs_recover:Set to attempt to recover from fatal errors (int)
parm:           spa_config_path:SPA config file (/etc/zfs/zpool.cache) (charp)
parm:           zfs_zevent_len_max:Max event queue length (int)
parm:           zfs_zevent_cols:Max event column width (int)
parm:           zfs_zevent_console:Log events to the console (int)
parm:           zfs_top_maxinflight:Max I/Os per top-level (int)
parm:           zfs_resilver_delay:Number of ticks to delay resilver (int)
parm:           zfs_scrub_delay:Number of ticks to delay scrub (int)
parm:           zfs_scan_idle:Idle window in clock ticks (int)
parm:           zfs_scan_min_time_ms:Min millisecs to scrub per txg (int)
parm:           zfs_free_min_time_ms:Min millisecs to free per txg (int)
parm:           zfs_resilver_min_time_ms:Min millisecs to resilver per txg (int)
parm:           zfs_no_scrub_io:Set to disable scrub I/O (bool)
parm:           zfs_no_scrub_prefetch:Set to disable scrub prefetching (bool)
parm:           zfs_txg_timeout:Max seconds worth of delta per txg (int)
parm:           zfs_no_write_throttle:Disable write throttling (int)
parm:           zfs_write_limit_shift:log2(fraction of memory) per txg (int)
parm:           zfs_txg_synctime_ms:Target milliseconds between tgx sync (int)
parm:           zfs_write_limit_min:Min tgx write limit (ulong)
parm:           zfs_write_limit_max:Max tgx write limit (ulong)
parm:           zfs_write_limit_inflated:Inflated tgx write limit (ulong)
parm:           zfs_write_limit_override:Override tgx write limit (ulong)
parm:           zfs_prefetch_disable:Disable all ZFS prefetching (int)
parm:           zfetch_max_streams:Max number of streams per zfetch (uint)
parm:           zfetch_min_sec_reap:Min time before stream reclaim (uint)
parm:           zfetch_block_cap:Max number of blocks to fetch at a time (uint)
parm:           zfetch_array_rd_sz:Number of bytes in a array_read (ulong)
parm:           zfs_pd_blks_max:Max number of blocks to prefetch (int)
parm:           zfs_dedup_prefetch:Enable prefetching dedup-ed blks (int)
parm:           zfs_arc_min:Min arc size (ulong)
parm:           zfs_arc_max:Max arc size (ulong)
parm:           zfs_arc_meta_limit:Meta limit for arc size (ulong)
parm:           zfs_arc_reduce_dnlc_percent:Meta reclaim percentage (int)
parm:           zfs_arc_grow_retry:Seconds before growing arc size (int)
parm:           zfs_arc_shrink_shift:log2(fraction of arc to reclaim) (int)
parm:           zfs_arc_p_min_shift:arc_c shift to calc min/max arc_p (int)
2011-05-04 10:02:37 -07:00

521 lines
13 KiB
C

/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
*/
/*
* ZFS fault injection
*
* To handle fault injection, we keep track of a series of zinject_record_t
* structures which describe which logical block(s) should be injected with a
* fault. These are kept in a global list. Each record corresponds to a given
* spa_t and maintains a special hold on the spa_t so that it cannot be deleted
* or exported while the injection record exists.
*
* Device level injection is done using the 'zi_guid' field. If this is set, it
* means that the error is destined for a particular device, not a piece of
* data.
*
* This is a rather poor data structure and algorithm, but we don't expect more
* than a few faults at any one time, so it should be sufficient for our needs.
*/
#include <sys/arc.h>
#include <sys/zio_impl.h>
#include <sys/zfs_ioctl.h>
#include <sys/vdev_impl.h>
#include <sys/dmu_objset.h>
#include <sys/fs/zfs.h>
uint32_t zio_injection_enabled = 0;
typedef struct inject_handler {
int zi_id;
spa_t *zi_spa;
zinject_record_t zi_record;
list_node_t zi_link;
} inject_handler_t;
static list_t inject_handlers;
static krwlock_t inject_lock;
static int inject_next_id = 1;
/*
* Returns true if the given record matches the I/O in progress.
*/
static boolean_t
zio_match_handler(zbookmark_t *zb, uint64_t type,
zinject_record_t *record, int error)
{
/*
* Check for a match against the MOS, which is based on type
*/
if (zb->zb_objset == DMU_META_OBJSET &&
record->zi_objset == DMU_META_OBJSET &&
record->zi_object == DMU_META_DNODE_OBJECT) {
if (record->zi_type == DMU_OT_NONE ||
type == record->zi_type)
return (record->zi_freq == 0 ||
spa_get_random(100) < record->zi_freq);
else
return (B_FALSE);
}
/*
* Check for an exact match.
*/
if (zb->zb_objset == record->zi_objset &&
zb->zb_object == record->zi_object &&
zb->zb_level == record->zi_level &&
zb->zb_blkid >= record->zi_start &&
zb->zb_blkid <= record->zi_end &&
error == record->zi_error)
return (record->zi_freq == 0 ||
spa_get_random(100) < record->zi_freq);
return (B_FALSE);
}
/*
* Panic the system when a config change happens in the function
* specified by tag.
*/
void
zio_handle_panic_injection(spa_t *spa, char *tag, uint64_t type)
{
inject_handler_t *handler;
rw_enter(&inject_lock, RW_READER);
for (handler = list_head(&inject_handlers); handler != NULL;
handler = list_next(&inject_handlers, handler)) {
if (spa != handler->zi_spa)
continue;
if (handler->zi_record.zi_type == type &&
strcmp(tag, handler->zi_record.zi_func) == 0)
panic("Panic requested in function %s\n", tag);
}
rw_exit(&inject_lock);
}
/*
* Determine if the I/O in question should return failure. Returns the errno
* to be returned to the caller.
*/
int
zio_handle_fault_injection(zio_t *zio, int error)
{
int ret = 0;
inject_handler_t *handler;
/*
* Ignore I/O not associated with any logical data.
*/
if (zio->io_logical == NULL)
return (0);
/*
* Currently, we only support fault injection on reads.
*/
if (zio->io_type != ZIO_TYPE_READ)
return (0);
rw_enter(&inject_lock, RW_READER);
for (handler = list_head(&inject_handlers); handler != NULL;
handler = list_next(&inject_handlers, handler)) {
/* Ignore errors not destined for this pool */
if (zio->io_spa != handler->zi_spa)
continue;
/* Ignore device errors and panic injection */
if (handler->zi_record.zi_guid != 0 ||
handler->zi_record.zi_func[0] != '\0' ||
handler->zi_record.zi_duration != 0)
continue;
/* If this handler matches, return EIO */
if (zio_match_handler(&zio->io_logical->io_bookmark,
zio->io_bp ? BP_GET_TYPE(zio->io_bp) : DMU_OT_NONE,
&handler->zi_record, error)) {
ret = error;
break;
}
}
rw_exit(&inject_lock);
return (ret);
}
/*
* Determine if the zio is part of a label update and has an injection
* handler associated with that portion of the label. Currently, we
* allow error injection in either the nvlist or the uberblock region of
* of the vdev label.
*/
int
zio_handle_label_injection(zio_t *zio, int error)
{
inject_handler_t *handler;
vdev_t *vd = zio->io_vd;
uint64_t offset = zio->io_offset;
int label;
int ret = 0;
if (offset >= VDEV_LABEL_START_SIZE &&
offset < vd->vdev_psize - VDEV_LABEL_END_SIZE)
return (0);
rw_enter(&inject_lock, RW_READER);
for (handler = list_head(&inject_handlers); handler != NULL;
handler = list_next(&inject_handlers, handler)) {
uint64_t start = handler->zi_record.zi_start;
uint64_t end = handler->zi_record.zi_end;
/* Ignore device only faults or panic injection */
if (handler->zi_record.zi_start == 0 ||
handler->zi_record.zi_func[0] != '\0' ||
handler->zi_record.zi_duration != 0)
continue;
/*
* The injection region is the relative offsets within a
* vdev label. We must determine the label which is being
* updated and adjust our region accordingly.
*/
label = vdev_label_number(vd->vdev_psize, offset);
start = vdev_label_offset(vd->vdev_psize, label, start);
end = vdev_label_offset(vd->vdev_psize, label, end);
if (zio->io_vd->vdev_guid == handler->zi_record.zi_guid &&
(offset >= start && offset <= end)) {
ret = error;
break;
}
}
rw_exit(&inject_lock);
return (ret);
}
int
zio_handle_device_injection(vdev_t *vd, zio_t *zio, int error)
{
inject_handler_t *handler;
int ret = 0;
/*
* We skip over faults in the labels unless it's during
* device open (i.e. zio == NULL).
*/
if (zio != NULL) {
uint64_t offset = zio->io_offset;
if (offset < VDEV_LABEL_START_SIZE ||
offset >= vd->vdev_psize - VDEV_LABEL_END_SIZE)
return (0);
}
rw_enter(&inject_lock, RW_READER);
for (handler = list_head(&inject_handlers); handler != NULL;
handler = list_next(&inject_handlers, handler)) {
/*
* Ignore label specific faults, panic injection
* or fake writes
*/
if (handler->zi_record.zi_start != 0 ||
handler->zi_record.zi_func[0] != '\0' ||
handler->zi_record.zi_duration != 0)
continue;
if (vd->vdev_guid == handler->zi_record.zi_guid) {
if (handler->zi_record.zi_failfast &&
(zio == NULL || (zio->io_flags &
(ZIO_FLAG_IO_RETRY | ZIO_FLAG_TRYHARD)))) {
continue;
}
/* Handle type specific I/O failures */
if (zio != NULL &&
handler->zi_record.zi_iotype != ZIO_TYPES &&
handler->zi_record.zi_iotype != zio->io_type)
continue;
if (handler->zi_record.zi_error == error) {
/*
* For a failed open, pretend like the device
* has gone away.
*/
if (error == ENXIO)
vd->vdev_stat.vs_aux =
VDEV_AUX_OPEN_FAILED;
/*
* Treat these errors as if they had been
* retried so that all the appropriate stats
* and FMA events are generated.
*/
if (!handler->zi_record.zi_failfast &&
zio != NULL)
zio->io_flags |= ZIO_FLAG_IO_RETRY;
ret = error;
break;
}
if (handler->zi_record.zi_error == ENXIO) {
ret = EIO;
break;
}
}
}
rw_exit(&inject_lock);
return (ret);
}
/*
* Simulate hardware that ignores cache flushes. For requested number
* of seconds nix the actual writing to disk.
*/
void
zio_handle_ignored_writes(zio_t *zio)
{
inject_handler_t *handler;
rw_enter(&inject_lock, RW_READER);
for (handler = list_head(&inject_handlers); handler != NULL;
handler = list_next(&inject_handlers, handler)) {
/* Ignore errors not destined for this pool */
if (zio->io_spa != handler->zi_spa)
continue;
if (handler->zi_record.zi_duration == 0)
continue;
/*
* Positive duration implies # of seconds, negative
* a number of txgs
*/
if (handler->zi_record.zi_timer == 0) {
if (handler->zi_record.zi_duration > 0)
handler->zi_record.zi_timer = ddi_get_lbolt64();
else
handler->zi_record.zi_timer = zio->io_txg;
}
/* Have a "problem" writing 60% of the time */
if (spa_get_random(100) < 60)
zio->io_pipeline &= ~ZIO_VDEV_IO_STAGES;
break;
}
rw_exit(&inject_lock);
}
void
spa_handle_ignored_writes(spa_t *spa)
{
inject_handler_t *handler;
if (zio_injection_enabled == 0)
return;
rw_enter(&inject_lock, RW_READER);
for (handler = list_head(&inject_handlers); handler != NULL;
handler = list_next(&inject_handlers, handler)) {
/* Ignore errors not destined for this pool */
if (spa != handler->zi_spa)
continue;
if (handler->zi_record.zi_duration == 0)
continue;
if (handler->zi_record.zi_duration > 0) {
VERIFY(handler->zi_record.zi_timer == 0 ||
handler->zi_record.zi_timer +
handler->zi_record.zi_duration * hz >
ddi_get_lbolt64());
} else {
/* duration is negative so the subtraction here adds */
VERIFY(handler->zi_record.zi_timer == 0 ||
handler->zi_record.zi_timer -
handler->zi_record.zi_duration >=
spa_syncing_txg(spa));
}
}
rw_exit(&inject_lock);
}
/*
* Create a new handler for the given record. We add it to the list, adding
* a reference to the spa_t in the process. We increment zio_injection_enabled,
* which is the switch to trigger all fault injection.
*/
int
zio_inject_fault(char *name, int flags, int *id, zinject_record_t *record)
{
inject_handler_t *handler;
int error;
spa_t *spa;
/*
* If this is pool-wide metadata, make sure we unload the corresponding
* spa_t, so that the next attempt to load it will trigger the fault.
* We call spa_reset() to unload the pool appropriately.
*/
if (flags & ZINJECT_UNLOAD_SPA)
if ((error = spa_reset(name)) != 0)
return (error);
if (!(flags & ZINJECT_NULL)) {
/*
* spa_inject_ref() will add an injection reference, which will
* prevent the pool from being removed from the namespace while
* still allowing it to be unloaded.
*/
if ((spa = spa_inject_addref(name)) == NULL)
return (ENOENT);
handler = kmem_alloc(sizeof (inject_handler_t), KM_SLEEP);
rw_enter(&inject_lock, RW_WRITER);
*id = handler->zi_id = inject_next_id++;
handler->zi_spa = spa;
handler->zi_record = *record;
list_insert_tail(&inject_handlers, handler);
atomic_add_32(&zio_injection_enabled, 1);
rw_exit(&inject_lock);
}
/*
* Flush the ARC, so that any attempts to read this data will end up
* going to the ZIO layer. Note that this is a little overkill, but
* we don't have the necessary ARC interfaces to do anything else, and
* fault injection isn't a performance critical path.
*/
if (flags & ZINJECT_FLUSH_ARC)
arc_flush(NULL);
return (0);
}
/*
* Returns the next record with an ID greater than that supplied to the
* function. Used to iterate over all handlers in the system.
*/
int
zio_inject_list_next(int *id, char *name, size_t buflen,
zinject_record_t *record)
{
inject_handler_t *handler;
int ret;
mutex_enter(&spa_namespace_lock);
rw_enter(&inject_lock, RW_READER);
for (handler = list_head(&inject_handlers); handler != NULL;
handler = list_next(&inject_handlers, handler))
if (handler->zi_id > *id)
break;
if (handler) {
*record = handler->zi_record;
*id = handler->zi_id;
(void) strncpy(name, spa_name(handler->zi_spa), buflen);
ret = 0;
} else {
ret = ENOENT;
}
rw_exit(&inject_lock);
mutex_exit(&spa_namespace_lock);
return (ret);
}
/*
* Clear the fault handler with the given identifier, or return ENOENT if none
* exists.
*/
int
zio_clear_fault(int id)
{
inject_handler_t *handler;
rw_enter(&inject_lock, RW_WRITER);
for (handler = list_head(&inject_handlers); handler != NULL;
handler = list_next(&inject_handlers, handler))
if (handler->zi_id == id)
break;
if (handler == NULL) {
rw_exit(&inject_lock);
return (ENOENT);
}
list_remove(&inject_handlers, handler);
rw_exit(&inject_lock);
spa_inject_delref(handler->zi_spa);
kmem_free(handler, sizeof (inject_handler_t));
atomic_add_32(&zio_injection_enabled, -1);
return (0);
}
void
zio_inject_init(void)
{
rw_init(&inject_lock, NULL, RW_DEFAULT, NULL);
list_create(&inject_handlers, sizeof (inject_handler_t),
offsetof(inject_handler_t, zi_link));
}
void
zio_inject_fini(void)
{
list_destroy(&inject_handlers);
rw_destroy(&inject_lock);
}
#if defined(_KERNEL) && defined(HAVE_SPL)
module_param(zio_injection_enabled, int, 0644);
MODULE_PARM_DESC(zio_injection_enabled, "Enable fault injection");
#endif