freebsd-dev/sys/kern/subr_kdb.c
Eric van Gyzen fcbb889fdb Always stop the scheduler when entering kdb
Set curthread->td_stopsched when entering kdb via any vector.
Previously, it was only set when entering via panic, so when
entering kdb another way, mutexes and such were still "live",
and an attempt to lock an already locked mutex would panic.

Reviewed by:	kib, cem
Discussed with:	jhb
Tested by:	pho
MFC after:	2 months
Sponsored by:	Dell EMC Isilon
Differential Revision:	https://reviews.freebsd.org/D17687
2018-10-30 14:54:15 +00:00

717 lines
15 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2004 The FreeBSD Project
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_kdb.h"
#include "opt_stack.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/cons.h>
#include <sys/kdb.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/lock.h>
#include <sys/pcpu.h>
#include <sys/proc.h>
#include <sys/sbuf.h>
#include <sys/smp.h>
#include <sys/stack.h>
#include <sys/sysctl.h>
#include <machine/kdb.h>
#include <machine/pcb.h>
#ifdef SMP
#include <machine/smp.h>
#endif
u_char __read_frequently kdb_active = 0;
static void *kdb_jmpbufp = NULL;
struct kdb_dbbe *kdb_dbbe = NULL;
static struct pcb kdb_pcb;
struct pcb *kdb_thrctx = NULL;
struct thread *kdb_thread = NULL;
struct trapframe *kdb_frame = NULL;
#ifdef BREAK_TO_DEBUGGER
#define KDB_BREAK_TO_DEBUGGER 1
#else
#define KDB_BREAK_TO_DEBUGGER 0
#endif
#ifdef ALT_BREAK_TO_DEBUGGER
#define KDB_ALT_BREAK_TO_DEBUGGER 1
#else
#define KDB_ALT_BREAK_TO_DEBUGGER 0
#endif
static int kdb_break_to_debugger = KDB_BREAK_TO_DEBUGGER;
static int kdb_alt_break_to_debugger = KDB_ALT_BREAK_TO_DEBUGGER;
KDB_BACKEND(null, NULL, NULL, NULL, NULL);
SET_DECLARE(kdb_dbbe_set, struct kdb_dbbe);
static int kdb_sysctl_available(SYSCTL_HANDLER_ARGS);
static int kdb_sysctl_current(SYSCTL_HANDLER_ARGS);
static int kdb_sysctl_enter(SYSCTL_HANDLER_ARGS);
static int kdb_sysctl_panic(SYSCTL_HANDLER_ARGS);
static int kdb_sysctl_trap(SYSCTL_HANDLER_ARGS);
static int kdb_sysctl_trap_code(SYSCTL_HANDLER_ARGS);
static int kdb_sysctl_stack_overflow(SYSCTL_HANDLER_ARGS);
static SYSCTL_NODE(_debug, OID_AUTO, kdb, CTLFLAG_RW, NULL, "KDB nodes");
SYSCTL_PROC(_debug_kdb, OID_AUTO, available, CTLTYPE_STRING | CTLFLAG_RD, NULL,
0, kdb_sysctl_available, "A", "list of available KDB backends");
SYSCTL_PROC(_debug_kdb, OID_AUTO, current, CTLTYPE_STRING | CTLFLAG_RW, NULL,
0, kdb_sysctl_current, "A", "currently selected KDB backend");
SYSCTL_PROC(_debug_kdb, OID_AUTO, enter,
CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_SECURE, NULL, 0,
kdb_sysctl_enter, "I", "set to enter the debugger");
SYSCTL_PROC(_debug_kdb, OID_AUTO, panic,
CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_SECURE, NULL, 0,
kdb_sysctl_panic, "I", "set to panic the kernel");
SYSCTL_PROC(_debug_kdb, OID_AUTO, trap,
CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_SECURE, NULL, 0,
kdb_sysctl_trap, "I", "set to cause a page fault via data access");
SYSCTL_PROC(_debug_kdb, OID_AUTO, trap_code,
CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_SECURE, NULL, 0,
kdb_sysctl_trap_code, "I", "set to cause a page fault via code access");
SYSCTL_PROC(_debug_kdb, OID_AUTO, stack_overflow,
CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_SECURE, NULL, 0,
kdb_sysctl_stack_overflow, "I", "set to cause a stack overflow");
SYSCTL_INT(_debug_kdb, OID_AUTO, break_to_debugger,
CTLFLAG_RWTUN | CTLFLAG_SECURE,
&kdb_break_to_debugger, 0, "Enable break to debugger");
SYSCTL_INT(_debug_kdb, OID_AUTO, alt_break_to_debugger,
CTLFLAG_RWTUN | CTLFLAG_SECURE,
&kdb_alt_break_to_debugger, 0, "Enable alternative break to debugger");
/*
* Flag to indicate to debuggers why the debugger was entered.
*/
const char * volatile kdb_why = KDB_WHY_UNSET;
static int
kdb_sysctl_available(SYSCTL_HANDLER_ARGS)
{
struct kdb_dbbe **iter;
struct sbuf sbuf;
int error;
sbuf_new_for_sysctl(&sbuf, NULL, 64, req);
SET_FOREACH(iter, kdb_dbbe_set) {
if ((*iter)->dbbe_active == 0)
sbuf_printf(&sbuf, "%s ", (*iter)->dbbe_name);
}
error = sbuf_finish(&sbuf);
sbuf_delete(&sbuf);
return (error);
}
static int
kdb_sysctl_current(SYSCTL_HANDLER_ARGS)
{
char buf[16];
int error;
if (kdb_dbbe != NULL)
strlcpy(buf, kdb_dbbe->dbbe_name, sizeof(buf));
else
*buf = '\0';
error = sysctl_handle_string(oidp, buf, sizeof(buf), req);
if (error != 0 || req->newptr == NULL)
return (error);
if (kdb_active)
return (EBUSY);
return (kdb_dbbe_select(buf));
}
static int
kdb_sysctl_enter(SYSCTL_HANDLER_ARGS)
{
int error, i;
error = sysctl_wire_old_buffer(req, sizeof(int));
if (error == 0) {
i = 0;
error = sysctl_handle_int(oidp, &i, 0, req);
}
if (error != 0 || req->newptr == NULL)
return (error);
if (kdb_active)
return (EBUSY);
kdb_enter(KDB_WHY_SYSCTL, "sysctl debug.kdb.enter");
return (0);
}
static int
kdb_sysctl_panic(SYSCTL_HANDLER_ARGS)
{
int error, i;
error = sysctl_wire_old_buffer(req, sizeof(int));
if (error == 0) {
i = 0;
error = sysctl_handle_int(oidp, &i, 0, req);
}
if (error != 0 || req->newptr == NULL)
return (error);
panic("kdb_sysctl_panic");
return (0);
}
static int
kdb_sysctl_trap(SYSCTL_HANDLER_ARGS)
{
int error, i;
int *addr = (int *)0x10;
error = sysctl_wire_old_buffer(req, sizeof(int));
if (error == 0) {
i = 0;
error = sysctl_handle_int(oidp, &i, 0, req);
}
if (error != 0 || req->newptr == NULL)
return (error);
return (*addr);
}
static int
kdb_sysctl_trap_code(SYSCTL_HANDLER_ARGS)
{
int error, i;
void (*fp)(u_int, u_int, u_int) = (void *)0xdeadc0de;
error = sysctl_wire_old_buffer(req, sizeof(int));
if (error == 0) {
i = 0;
error = sysctl_handle_int(oidp, &i, 0, req);
}
if (error != 0 || req->newptr == NULL)
return (error);
(*fp)(0x11111111, 0x22222222, 0x33333333);
return (0);
}
static void kdb_stack_overflow(volatile int *x) __noinline;
static void
kdb_stack_overflow(volatile int *x)
{
if (*x > 10000000)
return;
kdb_stack_overflow(x);
*x += PCPU_GET(cpuid) / 1000000;
}
static int
kdb_sysctl_stack_overflow(SYSCTL_HANDLER_ARGS)
{
int error, i;
volatile int x;
error = sysctl_wire_old_buffer(req, sizeof(int));
if (error == 0) {
i = 0;
error = sysctl_handle_int(oidp, &i, 0, req);
}
if (error != 0 || req->newptr == NULL)
return (error);
x = 0;
kdb_stack_overflow(&x);
return (0);
}
void
kdb_panic(const char *msg)
{
printf("KDB: panic\n");
panic("%s", msg);
}
void
kdb_reboot(void)
{
printf("KDB: reboot requested\n");
shutdown_nice(0);
}
/*
* Solaris implements a new BREAK which is initiated by a character sequence
* CR ~ ^b which is similar to a familiar pattern used on Sun servers by the
* Remote Console.
*
* Note that this function may be called from almost anywhere, with interrupts
* disabled and with unknown locks held, so it must not access data other than
* its arguments. Its up to the caller to ensure that the state variable is
* consistent.
*/
#define KEY_CR 13 /* CR '\r' */
#define KEY_TILDE 126 /* ~ */
#define KEY_CRTLB 2 /* ^B */
#define KEY_CRTLP 16 /* ^P */
#define KEY_CRTLR 18 /* ^R */
/* States of th KDB "alternate break sequence" detecting state machine. */
enum {
KDB_ALT_BREAK_SEEN_NONE,
KDB_ALT_BREAK_SEEN_CR,
KDB_ALT_BREAK_SEEN_CR_TILDE,
};
int
kdb_break(void)
{
if (!kdb_break_to_debugger)
return (0);
kdb_enter(KDB_WHY_BREAK, "Break to debugger");
return (KDB_REQ_DEBUGGER);
}
static int
kdb_alt_break_state(int key, int *state)
{
int brk;
/* All states transition to KDB_ALT_BREAK_SEEN_CR on a CR. */
if (key == KEY_CR) {
*state = KDB_ALT_BREAK_SEEN_CR;
return (0);
}
brk = 0;
switch (*state) {
case KDB_ALT_BREAK_SEEN_CR:
*state = KDB_ALT_BREAK_SEEN_NONE;
if (key == KEY_TILDE)
*state = KDB_ALT_BREAK_SEEN_CR_TILDE;
break;
case KDB_ALT_BREAK_SEEN_CR_TILDE:
*state = KDB_ALT_BREAK_SEEN_NONE;
if (key == KEY_CRTLB)
brk = KDB_REQ_DEBUGGER;
else if (key == KEY_CRTLP)
brk = KDB_REQ_PANIC;
else if (key == KEY_CRTLR)
brk = KDB_REQ_REBOOT;
break;
case KDB_ALT_BREAK_SEEN_NONE:
default:
*state = KDB_ALT_BREAK_SEEN_NONE;
break;
}
return (brk);
}
static int
kdb_alt_break_internal(int key, int *state, int force_gdb)
{
int brk;
if (!kdb_alt_break_to_debugger)
return (0);
brk = kdb_alt_break_state(key, state);
switch (brk) {
case KDB_REQ_DEBUGGER:
if (force_gdb)
kdb_dbbe_select("gdb");
kdb_enter(KDB_WHY_BREAK, "Break to debugger");
break;
case KDB_REQ_PANIC:
if (force_gdb)
kdb_dbbe_select("gdb");
kdb_panic("Panic sequence on console");
break;
case KDB_REQ_REBOOT:
kdb_reboot();
break;
}
return (0);
}
int
kdb_alt_break(int key, int *state)
{
return (kdb_alt_break_internal(key, state, 0));
}
/*
* This variation on kdb_alt_break() is used only by dcons, which has its own
* configuration flag to force GDB use regardless of the global KDB
* configuration.
*/
int
kdb_alt_break_gdb(int key, int *state)
{
return (kdb_alt_break_internal(key, state, 1));
}
/*
* Print a backtrace of the calling thread. The backtrace is generated by
* the selected debugger, provided it supports backtraces. If no debugger
* is selected or the current debugger does not support backtraces, this
* function silently returns.
*/
void
kdb_backtrace(void)
{
if (kdb_dbbe != NULL && kdb_dbbe->dbbe_trace != NULL) {
printf("KDB: stack backtrace:\n");
kdb_dbbe->dbbe_trace();
}
#ifdef STACK
else {
struct stack st;
printf("KDB: stack backtrace:\n");
stack_zero(&st);
stack_save(&st);
stack_print_ddb(&st);
}
#endif
}
/*
* Similar to kdb_backtrace() except that it prints a backtrace of an
* arbitrary thread rather than the calling thread.
*/
void
kdb_backtrace_thread(struct thread *td)
{
if (kdb_dbbe != NULL && kdb_dbbe->dbbe_trace_thread != NULL) {
printf("KDB: stack backtrace of thread %d:\n", td->td_tid);
kdb_dbbe->dbbe_trace_thread(td);
}
#ifdef STACK
else {
struct stack st;
printf("KDB: stack backtrace of thread %d:\n", td->td_tid);
stack_zero(&st);
stack_save_td(&st, td);
stack_print_ddb(&st);
}
#endif
}
/*
* Set/change the current backend.
*/
int
kdb_dbbe_select(const char *name)
{
struct kdb_dbbe *be, **iter;
SET_FOREACH(iter, kdb_dbbe_set) {
be = *iter;
if (be->dbbe_active == 0 && strcmp(be->dbbe_name, name) == 0) {
kdb_dbbe = be;
return (0);
}
}
return (EINVAL);
}
/*
* Enter the currently selected debugger. If a message has been provided,
* it is printed first. If the debugger does not support the enter method,
* it is entered by using breakpoint(), which enters the debugger through
* kdb_trap(). The 'why' argument will contain a more mechanically usable
* string than 'msg', and is relied upon by DDB scripting to identify the
* reason for entering the debugger so that the right script can be run.
*/
void
kdb_enter(const char *why, const char *msg)
{
if (kdb_dbbe != NULL && kdb_active == 0) {
if (msg != NULL)
printf("KDB: enter: %s\n", msg);
kdb_why = why;
breakpoint();
kdb_why = KDB_WHY_UNSET;
}
}
/*
* Initialize the kernel debugger interface.
*/
void
kdb_init(void)
{
struct kdb_dbbe *be, **iter;
int cur_pri, pri;
kdb_active = 0;
kdb_dbbe = NULL;
cur_pri = -1;
SET_FOREACH(iter, kdb_dbbe_set) {
be = *iter;
pri = (be->dbbe_init != NULL) ? be->dbbe_init() : -1;
be->dbbe_active = (pri >= 0) ? 0 : -1;
if (pri > cur_pri) {
cur_pri = pri;
kdb_dbbe = be;
}
}
if (kdb_dbbe != NULL) {
printf("KDB: debugger backends:");
SET_FOREACH(iter, kdb_dbbe_set) {
be = *iter;
if (be->dbbe_active == 0)
printf(" %s", be->dbbe_name);
}
printf("\n");
printf("KDB: current backend: %s\n",
kdb_dbbe->dbbe_name);
}
}
/*
* Handle contexts.
*/
void *
kdb_jmpbuf(jmp_buf new)
{
void *old;
old = kdb_jmpbufp;
kdb_jmpbufp = new;
return (old);
}
void
kdb_reenter(void)
{
if (!kdb_active || kdb_jmpbufp == NULL)
return;
printf("KDB: reentering\n");
kdb_backtrace();
longjmp(kdb_jmpbufp, 1);
/* NOTREACHED */
}
void
kdb_reenter_silent(void)
{
if (!kdb_active || kdb_jmpbufp == NULL)
return;
longjmp(kdb_jmpbufp, 1);
/* NOTREACHED */
}
/*
* Thread-related support functions.
*/
struct pcb *
kdb_thr_ctx(struct thread *thr)
{
#if defined(SMP) && defined(KDB_STOPPEDPCB)
struct pcpu *pc;
#endif
if (thr == curthread)
return (&kdb_pcb);
#if defined(SMP) && defined(KDB_STOPPEDPCB)
STAILQ_FOREACH(pc, &cpuhead, pc_allcpu) {
if (pc->pc_curthread == thr &&
CPU_ISSET(pc->pc_cpuid, &stopped_cpus))
return (KDB_STOPPEDPCB(pc));
}
#endif
return (thr->td_pcb);
}
struct thread *
kdb_thr_first(void)
{
struct proc *p;
struct thread *thr;
FOREACH_PROC_IN_SYSTEM(p) {
if (p->p_flag & P_INMEM) {
thr = FIRST_THREAD_IN_PROC(p);
if (thr != NULL)
return (thr);
}
}
return (NULL);
}
struct thread *
kdb_thr_from_pid(pid_t pid)
{
struct proc *p;
FOREACH_PROC_IN_SYSTEM(p) {
if (p->p_flag & P_INMEM && p->p_pid == pid)
return (FIRST_THREAD_IN_PROC(p));
}
return (NULL);
}
struct thread *
kdb_thr_lookup(lwpid_t tid)
{
struct thread *thr;
thr = kdb_thr_first();
while (thr != NULL && thr->td_tid != tid)
thr = kdb_thr_next(thr);
return (thr);
}
struct thread *
kdb_thr_next(struct thread *thr)
{
struct proc *p;
p = thr->td_proc;
thr = TAILQ_NEXT(thr, td_plist);
do {
if (thr != NULL)
return (thr);
p = LIST_NEXT(p, p_list);
if (p != NULL && (p->p_flag & P_INMEM))
thr = FIRST_THREAD_IN_PROC(p);
} while (p != NULL);
return (NULL);
}
int
kdb_thr_select(struct thread *thr)
{
if (thr == NULL)
return (EINVAL);
kdb_thread = thr;
kdb_thrctx = kdb_thr_ctx(thr);
return (0);
}
/*
* Enter the debugger due to a trap.
*/
int
kdb_trap(int type, int code, struct trapframe *tf)
{
#ifdef SMP
cpuset_t other_cpus;
#endif
struct kdb_dbbe *be;
register_t intr;
int handled;
int did_stop_cpus;
be = kdb_dbbe;
if (be == NULL || be->dbbe_trap == NULL)
return (0);
/* We reenter the debugger through kdb_reenter(). */
if (kdb_active)
return (0);
intr = intr_disable();
if (!SCHEDULER_STOPPED()) {
#ifdef SMP
other_cpus = all_cpus;
CPU_NAND(&other_cpus, &stopped_cpus);
CPU_CLR(PCPU_GET(cpuid), &other_cpus);
stop_cpus_hard(other_cpus);
#endif
curthread->td_stopsched = 1;
did_stop_cpus = 1;
} else
did_stop_cpus = 0;
kdb_active++;
kdb_frame = tf;
/* Let MD code do its thing first... */
kdb_cpu_trap(type, code);
makectx(tf, &kdb_pcb);
kdb_thr_select(curthread);
cngrab();
for (;;) {
handled = be->dbbe_trap(type, code);
if (be == kdb_dbbe)
break;
be = kdb_dbbe;
if (be == NULL || be->dbbe_trap == NULL)
break;
printf("Switching to %s back-end\n", be->dbbe_name);
}
cnungrab();
kdb_active--;
if (did_stop_cpus) {
curthread->td_stopsched = 0;
#ifdef SMP
CPU_AND(&other_cpus, &stopped_cpus);
restart_cpus(other_cpus);
#endif
}
intr_restore(intr);
return (handled);
}