freebsd-dev/sys/kern/kern_clock.c
Jeff Roberson b43179fbe8 - Create a new scheduler api that is defined in sys/sched.h
- Begin moving scheduler specific functionality into sched_4bsd.c
 - Replace direct manipulation of scheduler data with hooks provided by the
   new api.
 - Remove KSE specific state modifications and single runq assumptions from
   kern_switch.c

Reviewed by:	-arch
2002-10-12 05:32:24 +00:00

496 lines
14 KiB
C

/*-
* Copyright (c) 1982, 1986, 1991, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)kern_clock.c 8.5 (Berkeley) 1/21/94
* $FreeBSD$
*/
#include "opt_ntp.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/dkstat.h>
#include <sys/callout.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/ktr.h>
#include <sys/mutex.h>
#include <sys/proc.h>
#include <sys/resourcevar.h>
#include <sys/sched.h>
#include <sys/signalvar.h>
#include <sys/smp.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <vm/vm_map.h>
#include <sys/sysctl.h>
#include <sys/bus.h>
#include <sys/interrupt.h>
#include <sys/timetc.h>
#include <machine/cpu.h>
#include <machine/limits.h>
#ifdef GPROF
#include <sys/gmon.h>
#endif
#ifdef DEVICE_POLLING
extern void init_device_poll(void);
extern void hardclock_device_poll(void);
#endif /* DEVICE_POLLING */
static void initclocks(void *dummy);
SYSINIT(clocks, SI_SUB_CLOCKS, SI_ORDER_FIRST, initclocks, NULL)
/* Some of these don't belong here, but it's easiest to concentrate them. */
long cp_time[CPUSTATES];
SYSCTL_OPAQUE(_kern, OID_AUTO, cp_time, CTLFLAG_RD, &cp_time, sizeof(cp_time),
"LU", "CPU time statistics");
long tk_cancc;
long tk_nin;
long tk_nout;
long tk_rawcc;
/*
* Clock handling routines.
*
* This code is written to operate with two timers that run independently of
* each other.
*
* The main timer, running hz times per second, is used to trigger interval
* timers, timeouts and rescheduling as needed.
*
* The second timer handles kernel and user profiling,
* and does resource use estimation. If the second timer is programmable,
* it is randomized to avoid aliasing between the two clocks. For example,
* the randomization prevents an adversary from always giving up the cpu
* just before its quantum expires. Otherwise, it would never accumulate
* cpu ticks. The mean frequency of the second timer is stathz.
*
* If no second timer exists, stathz will be zero; in this case we drive
* profiling and statistics off the main clock. This WILL NOT be accurate;
* do not do it unless absolutely necessary.
*
* The statistics clock may (or may not) be run at a higher rate while
* profiling. This profile clock runs at profhz. We require that profhz
* be an integral multiple of stathz.
*
* If the statistics clock is running fast, it must be divided by the ratio
* profhz/stathz for statistics. (For profiling, every tick counts.)
*
* Time-of-day is maintained using a "timecounter", which may or may
* not be related to the hardware generating the above mentioned
* interrupts.
*/
int stathz;
int profhz;
static int profprocs;
int ticks;
static int psdiv, pscnt; /* prof => stat divider */
int psratio; /* ratio: prof / stat */
/*
* Initialize clock frequencies and start both clocks running.
*/
/* ARGSUSED*/
static void
initclocks(dummy)
void *dummy;
{
register int i;
/*
* Set divisors to 1 (normal case) and let the machine-specific
* code do its bit.
*/
psdiv = pscnt = 1;
cpu_initclocks();
#ifdef DEVICE_POLLING
init_device_poll();
#endif
/*
* Compute profhz/stathz, and fix profhz if needed.
*/
i = stathz ? stathz : hz;
if (profhz == 0)
profhz = i;
psratio = profhz / i;
}
/*
* Each time the real-time timer fires, this function is called on all CPUs
* with each CPU passing in its curthread as the first argument. If possible
* a nice optimization in the future would be to allow the CPU receiving the
* actual real-time timer interrupt to call this function on behalf of the
* other CPUs rather than sending an IPI to all other CPUs so that they
* can call this function. Note that hardclock() calls hardclock_process()
* for the CPU receiving the timer interrupt, so only the other CPUs in the
* system need to call this function (or have it called on their behalf.
*/
void
hardclock_process(td, user)
struct thread *td;
int user;
{
struct pstats *pstats;
struct proc *p = td->td_proc;
/*
* Run current process's virtual and profile time, as needed.
*/
mtx_assert(&sched_lock, MA_OWNED);
if (p->p_flag & P_KSES) {
/* XXXKSE What to do? */
} else {
pstats = p->p_stats;
if (user &&
timevalisset(&pstats->p_timer[ITIMER_VIRTUAL].it_value) &&
itimerdecr(&pstats->p_timer[ITIMER_VIRTUAL], tick) == 0) {
p->p_sflag |= PS_ALRMPEND;
td->td_kse->ke_flags |= KEF_ASTPENDING;
}
if (timevalisset(&pstats->p_timer[ITIMER_PROF].it_value) &&
itimerdecr(&pstats->p_timer[ITIMER_PROF], tick) == 0) {
p->p_sflag |= PS_PROFPEND;
td->td_kse->ke_flags |= KEF_ASTPENDING;
}
}
}
/*
* The real-time timer, interrupting hz times per second.
*/
void
hardclock(frame)
register struct clockframe *frame;
{
int need_softclock = 0;
CTR0(KTR_CLK, "hardclock fired");
mtx_lock_spin_flags(&sched_lock, MTX_QUIET);
hardclock_process(curthread, CLKF_USERMODE(frame));
mtx_unlock_spin_flags(&sched_lock, MTX_QUIET);
tc_ticktock();
/*
* If no separate statistics clock is available, run it from here.
*
* XXX: this only works for UP
*/
if (stathz == 0)
statclock(frame);
#ifdef DEVICE_POLLING
hardclock_device_poll(); /* this is very short and quick */
#endif /* DEVICE_POLLING */
/*
* Process callouts at a very low cpu priority, so we don't keep the
* relatively high clock interrupt priority any longer than necessary.
*/
mtx_lock_spin_flags(&callout_lock, MTX_QUIET);
ticks++;
if (TAILQ_FIRST(&callwheel[ticks & callwheelmask]) != NULL) {
need_softclock = 1;
} else if (softticks + 1 == ticks)
++softticks;
mtx_unlock_spin_flags(&callout_lock, MTX_QUIET);
/*
* swi_sched acquires sched_lock, so we don't want to call it with
* callout_lock held; incorrect locking order.
*/
if (need_softclock)
swi_sched(softclock_ih, 0);
}
/*
* Compute number of ticks in the specified amount of time.
*/
int
tvtohz(tv)
struct timeval *tv;
{
register unsigned long ticks;
register long sec, usec;
/*
* If the number of usecs in the whole seconds part of the time
* difference fits in a long, then the total number of usecs will
* fit in an unsigned long. Compute the total and convert it to
* ticks, rounding up and adding 1 to allow for the current tick
* to expire. Rounding also depends on unsigned long arithmetic
* to avoid overflow.
*
* Otherwise, if the number of ticks in the whole seconds part of
* the time difference fits in a long, then convert the parts to
* ticks separately and add, using similar rounding methods and
* overflow avoidance. This method would work in the previous
* case but it is slightly slower and assumes that hz is integral.
*
* Otherwise, round the time difference down to the maximum
* representable value.
*
* If ints have 32 bits, then the maximum value for any timeout in
* 10ms ticks is 248 days.
*/
sec = tv->tv_sec;
usec = tv->tv_usec;
if (usec < 0) {
sec--;
usec += 1000000;
}
if (sec < 0) {
#ifdef DIAGNOSTIC
if (usec > 0) {
sec++;
usec -= 1000000;
}
printf("tvotohz: negative time difference %ld sec %ld usec\n",
sec, usec);
#endif
ticks = 1;
} else if (sec <= LONG_MAX / 1000000)
ticks = (sec * 1000000 + (unsigned long)usec + (tick - 1))
/ tick + 1;
else if (sec <= LONG_MAX / hz)
ticks = sec * hz
+ ((unsigned long)usec + (tick - 1)) / tick + 1;
else
ticks = LONG_MAX;
if (ticks > INT_MAX)
ticks = INT_MAX;
return ((int)ticks);
}
/*
* Start profiling on a process.
*
* Kernel profiling passes proc0 which never exits and hence
* keeps the profile clock running constantly.
*/
void
startprofclock(p)
register struct proc *p;
{
int s;
/*
* XXX; Right now sched_lock protects statclock(), but perhaps
* it should be protected later on by a time_lock, which would
* cover psdiv, etc. as well.
*/
mtx_lock_spin(&sched_lock);
if ((p->p_sflag & PS_PROFIL) == 0) {
p->p_sflag |= PS_PROFIL;
if (++profprocs == 1 && stathz != 0) {
s = splstatclock();
psdiv = pscnt = psratio;
setstatclockrate(profhz);
splx(s);
}
}
mtx_unlock_spin(&sched_lock);
}
/*
* Stop profiling on a process.
*/
void
stopprofclock(p)
register struct proc *p;
{
int s;
mtx_lock_spin(&sched_lock);
if (p->p_sflag & PS_PROFIL) {
p->p_sflag &= ~PS_PROFIL;
if (--profprocs == 0 && stathz != 0) {
s = splstatclock();
psdiv = pscnt = 1;
setstatclockrate(stathz);
splx(s);
}
}
mtx_unlock_spin(&sched_lock);
}
/*
* Do process and kernel statistics. Most of the statistics are only
* used by user-level statistics programs. The main exceptions are
* ke->ke_uticks, p->p_sticks, p->p_iticks, and p->p_estcpu. This function
* should be called by all CPUs in the system for each statistics clock
* interrupt. See the description of hardclock_process for more detail on
* this function's relationship to statclock.
*/
void
statclock_process(ke, pc, user)
struct kse *ke;
register_t pc;
int user;
{
#ifdef GPROF
struct gmonparam *g;
int i;
#endif
struct pstats *pstats;
long rss;
struct rusage *ru;
struct vmspace *vm;
struct proc *p = ke->ke_proc;
struct thread *td = ke->ke_thread; /* current thread */
KASSERT(ke == curthread->td_kse, ("statclock_process: td != curthread"));
mtx_assert(&sched_lock, MA_OWNED);
if (user) {
/*
* Came from user mode; CPU was in user state.
* If this process is being profiled, record the tick.
*/
if (p->p_sflag & PS_PROFIL)
addupc_intr(ke, pc, 1);
if (pscnt < psdiv)
return;
/*
* Charge the time as appropriate.
*/
ke->ke_uticks++;
if (ke->ke_ksegrp->kg_nice > NZERO)
cp_time[CP_NICE]++;
else
cp_time[CP_USER]++;
} else {
#ifdef GPROF
/*
* Kernel statistics are just like addupc_intr, only easier.
*/
g = &_gmonparam;
if (g->state == GMON_PROF_ON) {
i = pc - g->lowpc;
if (i < g->textsize) {
i /= HISTFRACTION * sizeof(*g->kcount);
g->kcount[i]++;
}
}
#endif
if (pscnt < psdiv)
return;
/*
* Came from kernel mode, so we were:
* - handling an interrupt,
* - doing syscall or trap work on behalf of the current
* user process, or
* - spinning in the idle loop.
* Whichever it is, charge the time as appropriate.
* Note that we charge interrupts to the current process,
* regardless of whether they are ``for'' that process,
* so that we know how much of its real time was spent
* in ``non-process'' (i.e., interrupt) work.
*/
if ((td->td_ithd != NULL) || td->td_intr_nesting_level >= 2) {
ke->ke_iticks++;
cp_time[CP_INTR]++;
} else {
ke->ke_sticks++;
if (p != PCPU_GET(idlethread)->td_proc)
cp_time[CP_SYS]++;
else
cp_time[CP_IDLE]++;
}
}
sched_clock(ke->ke_thread);
/* Update resource usage integrals and maximums. */
if ((pstats = p->p_stats) != NULL &&
(ru = &pstats->p_ru) != NULL &&
(vm = p->p_vmspace) != NULL) {
ru->ru_ixrss += pgtok(vm->vm_tsize);
ru->ru_idrss += pgtok(vm->vm_dsize);
ru->ru_isrss += pgtok(vm->vm_ssize);
rss = pgtok(vmspace_resident_count(vm));
if (ru->ru_maxrss < rss)
ru->ru_maxrss = rss;
}
}
/*
* Statistics clock. Grab profile sample, and if divider reaches 0,
* do process and kernel statistics. Most of the statistics are only
* used by user-level statistics programs. The main exceptions are
* ke->ke_uticks, p->p_sticks, p->p_iticks, and p->p_estcpu.
*/
void
statclock(frame)
register struct clockframe *frame;
{
CTR0(KTR_CLK, "statclock fired");
mtx_lock_spin_flags(&sched_lock, MTX_QUIET);
if (--pscnt == 0)
pscnt = psdiv;
statclock_process(curthread->td_kse, CLKF_PC(frame), CLKF_USERMODE(frame));
mtx_unlock_spin_flags(&sched_lock, MTX_QUIET);
}
/*
* Return information about system clocks.
*/
static int
sysctl_kern_clockrate(SYSCTL_HANDLER_ARGS)
{
struct clockinfo clkinfo;
/*
* Construct clockinfo structure.
*/
bzero(&clkinfo, sizeof(clkinfo));
clkinfo.hz = hz;
clkinfo.tick = tick;
clkinfo.profhz = profhz;
clkinfo.stathz = stathz ? stathz : hz;
return (sysctl_handle_opaque(oidp, &clkinfo, sizeof clkinfo, req));
}
SYSCTL_PROC(_kern, KERN_CLOCKRATE, clockrate, CTLTYPE_STRUCT|CTLFLAG_RD,
0, 0, sysctl_kern_clockrate, "S,clockinfo",
"Rate and period of various kernel clocks");