c6905524b4
Approved by: adrian (mentor)
504 lines
13 KiB
C
504 lines
13 KiB
C
/*-
|
|
* Copyright (c) 2006 M. Warner Losh. All rights reserved.
|
|
* Copyright (c) 2009 Oleksandr Tymoshenko. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bio.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/kthread.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/module.h>
|
|
#include <sys/mutex.h>
|
|
#include <geom/geom_disk.h>
|
|
|
|
#include <dev/spibus/spi.h>
|
|
#include "spibus_if.h"
|
|
|
|
#include <dev/flash/mx25lreg.h>
|
|
|
|
#define FL_NONE 0x00
|
|
#define FL_ERASE_4K 0x01
|
|
#define FL_ERASE_32K 0x02
|
|
|
|
/*
|
|
* Define the sectorsize to be a smaller size rather than the flash
|
|
* sector size. Trying to run FFS off of a 64k flash sector size
|
|
* results in a completely un-usable system.
|
|
*/
|
|
#define MX25L_SECTORSIZE 512
|
|
|
|
struct mx25l_flash_ident
|
|
{
|
|
const char *name;
|
|
uint8_t manufacturer_id;
|
|
uint16_t device_id;
|
|
unsigned int sectorsize;
|
|
unsigned int sectorcount;
|
|
unsigned int flags;
|
|
};
|
|
|
|
struct mx25l_softc
|
|
{
|
|
device_t sc_dev;
|
|
uint8_t sc_manufacturer_id;
|
|
uint16_t sc_device_id;
|
|
unsigned int sc_sectorsize;
|
|
struct mtx sc_mtx;
|
|
struct disk *sc_disk;
|
|
struct proc *sc_p;
|
|
struct bio_queue_head sc_bio_queue;
|
|
unsigned int sc_flags;
|
|
};
|
|
|
|
#define M25PXX_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx)
|
|
#define M25PXX_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx)
|
|
#define M25PXX_LOCK_INIT(_sc) \
|
|
mtx_init(&_sc->sc_mtx, device_get_nameunit(_sc->sc_dev), \
|
|
"mx25l", MTX_DEF)
|
|
#define M25PXX_LOCK_DESTROY(_sc) mtx_destroy(&_sc->sc_mtx);
|
|
#define M25PXX_ASSERT_LOCKED(_sc) mtx_assert(&_sc->sc_mtx, MA_OWNED);
|
|
#define M25PXX_ASSERT_UNLOCKED(_sc) mtx_assert(&_sc->sc_mtx, MA_NOTOWNED);
|
|
|
|
/* disk routines */
|
|
static int mx25l_open(struct disk *dp);
|
|
static int mx25l_close(struct disk *dp);
|
|
static int mx25l_ioctl(struct disk *, u_long, void *, int, struct thread *);
|
|
static void mx25l_strategy(struct bio *bp);
|
|
static void mx25l_task(void *arg);
|
|
|
|
struct mx25l_flash_ident flash_devices[] = {
|
|
{ "en25f32", 0x1c, 0x3116, 64 * 1024, 64, FL_NONE },
|
|
{ "en25p32", 0x1c, 0x2016, 64 * 1024, 64, FL_NONE },
|
|
{ "en25p64", 0x1c, 0x2017, 64 * 1024, 128, FL_NONE },
|
|
{ "en25q64", 0x1c, 0x3017, 64 * 1024, 128, FL_ERASE_4K },
|
|
{ "m25p64", 0x20, 0x2017, 64 * 1024, 128, FL_NONE },
|
|
{ "mx25ll32", 0xc2, 0x2016, 64 * 1024, 64, FL_NONE },
|
|
{ "mx25ll64", 0xc2, 0x2017, 64 * 1024, 128, FL_NONE },
|
|
{ "mx25ll128", 0xc2, 0x2018, 64 * 1024, 256, FL_ERASE_4K | FL_ERASE_32K },
|
|
{ "s25fl032", 0x01, 0x0215, 64 * 1024, 64, FL_NONE },
|
|
{ "s25fl064", 0x01, 0x0216, 64 * 1024, 128, FL_NONE },
|
|
{ "s25fl128", 0x01, 0x2018, 64 * 1024, 256, FL_NONE },
|
|
{ "SST25VF032B", 0xbf, 0x254a, 64 * 1024, 64, FL_ERASE_4K | FL_ERASE_32K },
|
|
|
|
/* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */
|
|
{ "w25x32", 0xef, 0x3016, 64 * 1024, 64, FL_ERASE_4K },
|
|
{ "w25q32", 0xef, 0x4016, 64 * 1024, 64, FL_ERASE_4K },
|
|
{ "w25q64", 0xef, 0x4017, 64 * 1024, 128, FL_ERASE_4K },
|
|
{ "w25q64bv", 0xef, 0x4017, 64 * 1024, 128, FL_ERASE_4K },
|
|
{ "w25q128", 0xef, 0x4018, 64 * 1024, 256, FL_ERASE_4K },
|
|
{ "w25q256", 0xef, 0x4019, 64 * 1024, 512, FL_ERASE_4K },
|
|
};
|
|
|
|
static uint8_t
|
|
mx25l_get_status(device_t dev)
|
|
{
|
|
uint8_t txBuf[2], rxBuf[2];
|
|
struct spi_command cmd;
|
|
int err;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
memset(txBuf, 0, sizeof(txBuf));
|
|
memset(rxBuf, 0, sizeof(rxBuf));
|
|
|
|
txBuf[0] = CMD_READ_STATUS;
|
|
cmd.tx_cmd = txBuf;
|
|
cmd.rx_cmd = rxBuf;
|
|
cmd.rx_cmd_sz = 2;
|
|
cmd.tx_cmd_sz = 2;
|
|
err = SPIBUS_TRANSFER(device_get_parent(dev), dev, &cmd);
|
|
return (rxBuf[1]);
|
|
}
|
|
|
|
static void
|
|
mx25l_wait_for_device_ready(device_t dev)
|
|
{
|
|
while ((mx25l_get_status(dev) & STATUS_WIP))
|
|
continue;
|
|
}
|
|
|
|
static struct mx25l_flash_ident*
|
|
mx25l_get_device_ident(struct mx25l_softc *sc)
|
|
{
|
|
device_t dev = sc->sc_dev;
|
|
uint8_t txBuf[8], rxBuf[8];
|
|
struct spi_command cmd;
|
|
uint8_t manufacturer_id;
|
|
uint16_t dev_id;
|
|
int err, i;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
memset(txBuf, 0, sizeof(txBuf));
|
|
memset(rxBuf, 0, sizeof(rxBuf));
|
|
|
|
txBuf[0] = CMD_READ_IDENT;
|
|
cmd.tx_cmd = &txBuf;
|
|
cmd.rx_cmd = &rxBuf;
|
|
/*
|
|
* Some compatible devices has extended two-bytes ID
|
|
* We'll use only manufacturer/deviceid atm
|
|
*/
|
|
cmd.tx_cmd_sz = 4;
|
|
cmd.rx_cmd_sz = 4;
|
|
err = SPIBUS_TRANSFER(device_get_parent(dev), dev, &cmd);
|
|
if (err)
|
|
return (NULL);
|
|
|
|
manufacturer_id = rxBuf[1];
|
|
dev_id = (rxBuf[2] << 8) | (rxBuf[3]);
|
|
|
|
for (i = 0;
|
|
i < sizeof(flash_devices)/sizeof(struct mx25l_flash_ident); i++) {
|
|
if ((flash_devices[i].manufacturer_id == manufacturer_id) &&
|
|
(flash_devices[i].device_id == dev_id))
|
|
return &flash_devices[i];
|
|
}
|
|
|
|
printf("Unknown SPI flash device. Vendor: %02x, device id: %04x\n",
|
|
manufacturer_id, dev_id);
|
|
return (NULL);
|
|
}
|
|
|
|
static void
|
|
mx25l_set_writable(device_t dev, int writable)
|
|
{
|
|
uint8_t txBuf[1], rxBuf[1];
|
|
struct spi_command cmd;
|
|
int err;
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
memset(txBuf, 0, sizeof(txBuf));
|
|
memset(rxBuf, 0, sizeof(rxBuf));
|
|
|
|
txBuf[0] = writable ? CMD_WRITE_ENABLE : CMD_WRITE_DISABLE;
|
|
cmd.tx_cmd = txBuf;
|
|
cmd.rx_cmd = rxBuf;
|
|
cmd.rx_cmd_sz = 1;
|
|
cmd.tx_cmd_sz = 1;
|
|
err = SPIBUS_TRANSFER(device_get_parent(dev), dev, &cmd);
|
|
}
|
|
|
|
static void
|
|
mx25l_erase_cmd(device_t dev, off_t sector, uint8_t ecmd)
|
|
{
|
|
uint8_t txBuf[4], rxBuf[4];
|
|
struct spi_command cmd;
|
|
int err;
|
|
|
|
mx25l_wait_for_device_ready(dev);
|
|
mx25l_set_writable(dev, 1);
|
|
|
|
memset(&cmd, 0, sizeof(cmd));
|
|
memset(txBuf, 0, sizeof(txBuf));
|
|
memset(rxBuf, 0, sizeof(rxBuf));
|
|
|
|
txBuf[0] = ecmd;
|
|
cmd.tx_cmd = txBuf;
|
|
cmd.rx_cmd = rxBuf;
|
|
cmd.rx_cmd_sz = 4;
|
|
cmd.tx_cmd_sz = 4;
|
|
txBuf[1] = ((sector >> 16) & 0xff);
|
|
txBuf[2] = ((sector >> 8) & 0xff);
|
|
txBuf[3] = (sector & 0xff);
|
|
err = SPIBUS_TRANSFER(device_get_parent(dev), dev, &cmd);
|
|
}
|
|
|
|
static int
|
|
mx25l_write(device_t dev, off_t offset, caddr_t data, off_t count)
|
|
{
|
|
struct mx25l_softc *sc;
|
|
uint8_t txBuf[8], rxBuf[8];
|
|
struct spi_command cmd;
|
|
off_t write_offset;
|
|
long bytes_to_write, bytes_writen;
|
|
device_t pdev;
|
|
int err = 0;
|
|
|
|
pdev = device_get_parent(dev);
|
|
sc = device_get_softc(dev);
|
|
|
|
cmd.tx_cmd_sz = 4;
|
|
cmd.rx_cmd_sz = 4;
|
|
|
|
bytes_writen = 0;
|
|
write_offset = offset;
|
|
|
|
/*
|
|
* Use the erase sectorsize here since blocks are fully erased
|
|
* first before they're written to.
|
|
*/
|
|
if (count % sc->sc_sectorsize != 0 || offset % sc->sc_sectorsize != 0)
|
|
return (EIO);
|
|
|
|
/*
|
|
* Assume here that we write per-sector only
|
|
* and sector size should be 256 bytes aligned
|
|
*/
|
|
KASSERT(write_offset % FLASH_PAGE_SIZE == 0,
|
|
("offset for BIO_WRITE is not page size (%d bytes) aligned",
|
|
FLASH_PAGE_SIZE));
|
|
|
|
/*
|
|
* Maximum write size for CMD_PAGE_PROGRAM is
|
|
* FLASH_PAGE_SIZE, so split data to chunks
|
|
* FLASH_PAGE_SIZE bytes eash and write them
|
|
* one by one
|
|
*/
|
|
while (bytes_writen < count) {
|
|
/*
|
|
* If we crossed sector boundary - erase next sector
|
|
*/
|
|
if (((offset + bytes_writen) % sc->sc_sectorsize) == 0)
|
|
mx25l_erase_cmd(dev, offset + bytes_writen, CMD_SECTOR_ERASE);
|
|
|
|
txBuf[0] = CMD_PAGE_PROGRAM;
|
|
txBuf[1] = ((write_offset >> 16) & 0xff);
|
|
txBuf[2] = ((write_offset >> 8) & 0xff);
|
|
txBuf[3] = (write_offset & 0xff);
|
|
|
|
bytes_to_write = MIN(FLASH_PAGE_SIZE,
|
|
count - bytes_writen);
|
|
cmd.tx_cmd = txBuf;
|
|
cmd.rx_cmd = rxBuf;
|
|
cmd.tx_data = data + bytes_writen;
|
|
cmd.tx_data_sz = bytes_to_write;
|
|
cmd.rx_data = data + bytes_writen;
|
|
cmd.rx_data_sz = bytes_to_write;
|
|
|
|
/*
|
|
* Eash completed write operation resets WEL
|
|
* (write enable latch) to disabled state,
|
|
* so we re-enable it here
|
|
*/
|
|
mx25l_wait_for_device_ready(dev);
|
|
mx25l_set_writable(dev, 1);
|
|
|
|
err = SPIBUS_TRANSFER(pdev, dev, &cmd);
|
|
if (err)
|
|
break;
|
|
|
|
bytes_writen += bytes_to_write;
|
|
write_offset += bytes_to_write;
|
|
}
|
|
|
|
return (err);
|
|
}
|
|
|
|
static int
|
|
mx25l_read(device_t dev, off_t offset, caddr_t data, off_t count)
|
|
{
|
|
struct mx25l_softc *sc;
|
|
uint8_t txBuf[8], rxBuf[8];
|
|
struct spi_command cmd;
|
|
device_t pdev;
|
|
int err = 0;
|
|
|
|
pdev = device_get_parent(dev);
|
|
sc = device_get_softc(dev);
|
|
|
|
/*
|
|
* Enforce the disk read sectorsize not the erase sectorsize.
|
|
* In this way, smaller read IO is possible,dramatically
|
|
* speeding up filesystem/geom_compress access.
|
|
*/
|
|
if (count % sc->sc_disk->d_sectorsize != 0
|
|
|| offset % sc->sc_disk->d_sectorsize != 0)
|
|
return (EIO);
|
|
|
|
txBuf[0] = CMD_FAST_READ;
|
|
cmd.tx_cmd_sz = 5;
|
|
cmd.rx_cmd_sz = 5;
|
|
|
|
txBuf[1] = ((offset >> 16) & 0xff);
|
|
txBuf[2] = ((offset >> 8) & 0xff);
|
|
txBuf[3] = (offset & 0xff);
|
|
/* Dummy byte */
|
|
txBuf[4] = 0;
|
|
|
|
cmd.tx_cmd = txBuf;
|
|
cmd.rx_cmd = rxBuf;
|
|
cmd.tx_data = data;
|
|
cmd.tx_data_sz = count;
|
|
cmd.rx_data = data;
|
|
cmd.rx_data_sz = count;
|
|
|
|
err = SPIBUS_TRANSFER(pdev, dev, &cmd);
|
|
|
|
return (err);
|
|
}
|
|
|
|
static int
|
|
mx25l_probe(device_t dev)
|
|
{
|
|
device_set_desc(dev, "M25Pxx Flash Family");
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mx25l_attach(device_t dev)
|
|
{
|
|
struct mx25l_softc *sc;
|
|
struct mx25l_flash_ident *ident;
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->sc_dev = dev;
|
|
M25PXX_LOCK_INIT(sc);
|
|
|
|
ident = mx25l_get_device_ident(sc);
|
|
if (ident == NULL)
|
|
return (ENXIO);
|
|
|
|
mx25l_wait_for_device_ready(sc->sc_dev);
|
|
|
|
sc->sc_disk = disk_alloc();
|
|
sc->sc_disk->d_open = mx25l_open;
|
|
sc->sc_disk->d_close = mx25l_close;
|
|
sc->sc_disk->d_strategy = mx25l_strategy;
|
|
sc->sc_disk->d_ioctl = mx25l_ioctl;
|
|
sc->sc_disk->d_name = "flash/spi";
|
|
sc->sc_disk->d_drv1 = sc;
|
|
sc->sc_disk->d_maxsize = DFLTPHYS;
|
|
sc->sc_disk->d_sectorsize = MX25L_SECTORSIZE;
|
|
sc->sc_disk->d_mediasize = ident->sectorsize * ident->sectorcount;
|
|
sc->sc_disk->d_unit = device_get_unit(sc->sc_dev);
|
|
sc->sc_disk->d_dump = NULL; /* NB: no dumps */
|
|
/* Sectorsize for erase operations */
|
|
sc->sc_sectorsize = ident->sectorsize;
|
|
sc->sc_flags = ident->flags;
|
|
|
|
/* NB: use stripesize to hold the erase/region size for RedBoot */
|
|
sc->sc_disk->d_stripesize = ident->sectorsize;
|
|
|
|
disk_create(sc->sc_disk, DISK_VERSION);
|
|
bioq_init(&sc->sc_bio_queue);
|
|
|
|
kproc_create(&mx25l_task, sc, &sc->sc_p, 0, 0, "task: mx25l flash");
|
|
device_printf(sc->sc_dev, "%s, sector %d bytes, %d sectors\n",
|
|
ident->name, ident->sectorsize, ident->sectorcount);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mx25l_detach(device_t dev)
|
|
{
|
|
|
|
return (EIO);
|
|
}
|
|
|
|
static int
|
|
mx25l_open(struct disk *dp)
|
|
{
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mx25l_close(struct disk *dp)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mx25l_ioctl(struct disk *dp, u_long cmd, void *data, int fflag,
|
|
struct thread *td)
|
|
{
|
|
|
|
return (EINVAL);
|
|
}
|
|
|
|
static void
|
|
mx25l_strategy(struct bio *bp)
|
|
{
|
|
struct mx25l_softc *sc;
|
|
|
|
sc = (struct mx25l_softc *)bp->bio_disk->d_drv1;
|
|
M25PXX_LOCK(sc);
|
|
bioq_disksort(&sc->sc_bio_queue, bp);
|
|
wakeup(sc);
|
|
M25PXX_UNLOCK(sc);
|
|
}
|
|
|
|
static void
|
|
mx25l_task(void *arg)
|
|
{
|
|
struct mx25l_softc *sc = (struct mx25l_softc*)arg;
|
|
struct bio *bp;
|
|
device_t dev;
|
|
|
|
for (;;) {
|
|
dev = sc->sc_dev;
|
|
M25PXX_LOCK(sc);
|
|
do {
|
|
bp = bioq_first(&sc->sc_bio_queue);
|
|
if (bp == NULL)
|
|
msleep(sc, &sc->sc_mtx, PRIBIO, "jobqueue", 0);
|
|
} while (bp == NULL);
|
|
bioq_remove(&sc->sc_bio_queue, bp);
|
|
M25PXX_UNLOCK(sc);
|
|
|
|
switch (bp->bio_cmd) {
|
|
case BIO_READ:
|
|
bp->bio_error = mx25l_read(dev, bp->bio_offset,
|
|
bp->bio_data, bp->bio_bcount);
|
|
break;
|
|
case BIO_WRITE:
|
|
bp->bio_error = mx25l_write(dev, bp->bio_offset,
|
|
bp->bio_data, bp->bio_bcount);
|
|
break;
|
|
default:
|
|
bp->bio_error = EINVAL;
|
|
}
|
|
|
|
|
|
biodone(bp);
|
|
}
|
|
}
|
|
|
|
static devclass_t mx25l_devclass;
|
|
|
|
static device_method_t mx25l_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, mx25l_probe),
|
|
DEVMETHOD(device_attach, mx25l_attach),
|
|
DEVMETHOD(device_detach, mx25l_detach),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t mx25l_driver = {
|
|
"mx25l",
|
|
mx25l_methods,
|
|
sizeof(struct mx25l_softc),
|
|
};
|
|
|
|
DRIVER_MODULE(mx25l, spibus, mx25l_driver, mx25l_devclass, 0, 0);
|