freebsd-dev/sys/dev/mii/brgphy.c
Marius Strobl 2f9f08b635 - Take advantage of mii_phy_add_media() for adding media and setting
sc->mii_anegticks according to whether the respective BGE chip
  supports Fast Ethernet only or also Gigabit Ethernet.
- At least the BGE chips I've tested with wedge when isolating them
  so document this as the reason for setting MIIF_NOISOLATE and
  remove the unused (and partially even #ifdef'ed out) isolation
  related code. Add code that panics if we encounter a non-zero MII
  instance as generally there's no way a PHY requiring MIIF_NOISOLATE
  can be handled gracefully in a multi-PHY configuration (it's ok for
  the internal PHY of single-PHY-only-NIC to not support isolation
  though).
- Additionally set MIIF_NOLOOP as loopback doesn't seem to work
  either and remove the #ifdef'ed out code for adding respective
  media. The MIIF_NOLOOP flag currently triggers nothing but
  hopefully will be respected by mii_phy_setmedia() later on.

Reviewed by:	jkim, yongari
MFC after:	1 month
2007-04-30 22:35:33 +00:00

766 lines
20 KiB
C

/*-
* Copyright (c) 2000
* Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Bill Paul.
* 4. Neither the name of the author nor the names of any co-contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Driver for the Broadcom BCM54xx/57xx 1000baseTX PHY.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/socket.h>
#include <sys/bus.h>
#include <net/if.h>
#include <net/ethernet.h>
#include <net/if_media.h>
#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>
#include "miidevs.h"
#include <dev/mii/brgphyreg.h>
#include <net/if_arp.h>
#include <machine/bus.h>
#include <dev/bge/if_bgereg.h>
#include <dev/bce/if_bcereg.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include "miibus_if.h"
static int brgphy_probe(device_t);
static int brgphy_attach(device_t);
struct brgphy_softc {
struct mii_softc mii_sc;
int mii_model;
int mii_rev;
};
static device_method_t brgphy_methods[] = {
/* device interface */
DEVMETHOD(device_probe, brgphy_probe),
DEVMETHOD(device_attach, brgphy_attach),
DEVMETHOD(device_detach, mii_phy_detach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
{ 0, 0 }
};
static devclass_t brgphy_devclass;
static driver_t brgphy_driver = {
"brgphy",
brgphy_methods,
sizeof(struct brgphy_softc)
};
DRIVER_MODULE(brgphy, miibus, brgphy_driver, brgphy_devclass, 0, 0);
static int brgphy_service(struct mii_softc *, struct mii_data *, int);
static void brgphy_setmedia(struct mii_softc *, int, int);
static void brgphy_status(struct mii_softc *);
static int brgphy_mii_phy_auto(struct mii_softc *);
static void brgphy_reset(struct mii_softc *);
static void brgphy_loop(struct mii_softc *);
static int bcm5706_is_tbi(device_t);
static void bcm5401_load_dspcode(struct mii_softc *);
static void bcm5411_load_dspcode(struct mii_softc *);
static void brgphy_fixup_5704_a0_bug(struct mii_softc *);
static void brgphy_fixup_adc_bug(struct mii_softc *);
static void brgphy_fixup_adjust_trim(struct mii_softc *);
static void brgphy_fixup_ber_bug(struct mii_softc *);
static void brgphy_fixup_crc_bug(struct mii_softc *);
static void brgphy_fixup_jitter_bug(struct mii_softc *);
static void brgphy_ethernet_wirespeed(struct mii_softc *);
static void brgphy_jumbo_settings(struct mii_softc *, u_long);
static const struct mii_phydesc brgphys[] = {
MII_PHY_DESC(xxBROADCOM, BCM5400),
MII_PHY_DESC(xxBROADCOM, BCM5401),
MII_PHY_DESC(xxBROADCOM, BCM5411),
MII_PHY_DESC(xxBROADCOM, BCM5701),
MII_PHY_DESC(xxBROADCOM, BCM5703),
MII_PHY_DESC(xxBROADCOM, BCM5704),
MII_PHY_DESC(xxBROADCOM, BCM5705),
MII_PHY_DESC(xxBROADCOM, BCM5706C),
MII_PHY_DESC(xxBROADCOM, BCM5714),
MII_PHY_DESC(xxBROADCOM, BCM5750),
MII_PHY_DESC(xxBROADCOM, BCM5752),
MII_PHY_DESC(xxBROADCOM, BCM5754),
MII_PHY_DESC(xxBROADCOM, BCM5780),
MII_PHY_DESC(xxBROADCOM, BCM5708C),
MII_PHY_DESC(xxBROADCOM_ALT1, BCM5755),
MII_PHY_DESC(xxBROADCOM_ALT1, BCM5787),
MII_PHY_END
};
static int
brgphy_probe(device_t dev)
{
struct mii_attach_args *ma;
int error;
error = mii_phy_dev_probe(dev, brgphys, BUS_PROBE_DEFAULT);
if (error != BUS_PROBE_DEFAULT)
return (error);
ma = device_get_ivars(dev);
if (MII_OUI(ma->mii_id1, ma->mii_id2) == MII_OUI_xxBROADCOM &&
MII_MODEL(ma->mii_id2) == MII_MODEL_xxBROADCOM_BCM5706C) {
/*
* Broadcom uses the same MII model ID on two
* different types of phys. The first is found on the
* BCM 5706 and is supported by this driver. The
* other is found on the BCM 5706S and 5708S and is
* supported by the gentbi(4) driver, so we check to
* see if this phy is supported by gentbi(4) and fail
* the probe if so.
*/
if (bcm5706_is_tbi(dev))
return (ENXIO);
}
return (error);
}
static int
brgphy_attach(device_t dev)
{
struct brgphy_softc *bsc;
struct mii_softc *sc;
struct mii_attach_args *ma;
struct mii_data *mii;
bsc = device_get_softc(dev);
sc = &bsc->mii_sc;
ma = device_get_ivars(dev);
sc->mii_dev = device_get_parent(dev);
mii = device_get_softc(sc->mii_dev);
/*
* At least some variants wedge when isolating, so never allow
* non-zero instances! At least some also don't support loopback.
*/
if (mii->mii_instance != 0)
panic("%s: ignoring this PHY, non-zero instance", __func__);
LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
sc->mii_inst = mii->mii_instance;
sc->mii_phy = ma->mii_phyno;
sc->mii_service = brgphy_service;
sc->mii_pdata = mii;
sc->mii_flags |= MIIF_NOISOLATE | MIIF_NOLOOP;
mii->mii_instance++;
bsc->mii_model = MII_MODEL(ma->mii_id2);
bsc->mii_rev = MII_REV(ma->mii_id2);
brgphy_reset(sc);
sc->mii_capabilities = PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
if (sc->mii_capabilities & BMSR_EXTSTAT)
sc->mii_extcapabilities = PHY_READ(sc, MII_EXTSR);
device_printf(dev, " ");
mii_phy_add_media(sc);
printf("\n");
MIIBUS_MEDIAINIT(sc->mii_dev);
return (0);
}
static int
brgphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
{
struct brgphy_softc *bsc = (struct brgphy_softc *)sc;
struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
switch (cmd) {
case MII_POLLSTAT:
/* If we're not polling our PHY instance, just return. */
if (IFM_INST(ife->ifm_media) != sc->mii_inst)
return (0);
break;
case MII_MEDIACHG:
/* If the interface is not up, don't do anything. */
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
break;
brgphy_reset(sc); /* XXX hardware bug work-around */
switch (IFM_SUBTYPE(ife->ifm_media)) {
case IFM_AUTO:
#ifdef foo
/* If we're already in auto mode, just return. */
if (PHY_READ(sc, BRGPHY_MII_BMCR) & BRGPHY_BMCR_AUTOEN)
return (0);
#endif
(void)brgphy_mii_phy_auto(sc);
break;
case IFM_1000_T:
case IFM_100_TX:
case IFM_10_T:
brgphy_setmedia(sc, ife->ifm_media,
mii->mii_ifp->if_flags & IFF_LINK0);
break;
default:
return (EINVAL);
}
break;
case MII_TICK:
/* If we're not currently selected, just return. */
if (IFM_INST(ife->ifm_media) != sc->mii_inst)
return (0);
/* Is the interface even up? */
if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
return (0);
/* Only used for autonegotiation. */
if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) {
sc->mii_ticks = 0; /* Reset autoneg timer. */
break;
}
/*
* Check to see if we have link. If we do, we don't
* need to restart the autonegotiation process.
*/
if (PHY_READ(sc, BRGPHY_MII_AUXSTS) & BRGPHY_AUXSTS_LINK) {
sc->mii_ticks = 0; /* Reset autoneg timer. */
break;
}
/* Announce link loss right after it happens. */
if (sc->mii_ticks++ == 0)
break;
/* Only retry autonegotiation every mii_anegticks seconds. */
if (sc->mii_ticks <= sc->mii_anegticks)
return (0);
sc->mii_ticks = 0;
(void)brgphy_mii_phy_auto(sc);
break;
}
/* Update the media status. */
brgphy_status(sc);
/*
* Callback if something changed. Note that we need to poke
* the DSP on the Broadcom PHYs if the media changes.
*/
if (sc->mii_media_active != mii->mii_media_active ||
sc->mii_media_status != mii->mii_media_status ||
cmd == MII_MEDIACHG) {
switch (bsc->mii_model) {
case MII_MODEL_xxBROADCOM_BCM5400:
bcm5401_load_dspcode(sc);
break;
case MII_MODEL_xxBROADCOM_BCM5401:
if (bsc->mii_rev == 1 || bsc->mii_rev == 3)
bcm5401_load_dspcode(sc);
break;
case MII_MODEL_xxBROADCOM_BCM5411:
bcm5411_load_dspcode(sc);
break;
}
}
mii_phy_update(sc, cmd);
return (0);
}
static void
brgphy_setmedia(struct mii_softc *sc, int media, int master)
{
struct brgphy_softc *bsc = (struct brgphy_softc *)sc;
int bmcr, gig;
switch (IFM_SUBTYPE(media)) {
case IFM_1000_T:
bmcr = BRGPHY_S1000;
break;
case IFM_100_TX:
bmcr = BRGPHY_S100;
break;
case IFM_10_T:
default:
bmcr = BRGPHY_S10;
break;
}
if ((media & IFM_GMASK) == IFM_FDX) {
bmcr |= BRGPHY_BMCR_FDX;
gig = BRGPHY_1000CTL_AFD;
} else {
gig = BRGPHY_1000CTL_AHD;
}
brgphy_loop(sc);
PHY_WRITE(sc, BRGPHY_MII_1000CTL, 0);
PHY_WRITE(sc, BRGPHY_MII_BMCR, bmcr);
PHY_WRITE(sc, BRGPHY_MII_ANAR, BRGPHY_SEL_TYPE);
if (IFM_SUBTYPE(media) != IFM_1000_T)
return;
PHY_WRITE(sc, BRGPHY_MII_1000CTL, gig);
PHY_WRITE(sc, BRGPHY_MII_BMCR,
bmcr | BRGPHY_BMCR_AUTOEN | BRGPHY_BMCR_STARTNEG);
if (bsc->mii_model != MII_MODEL_xxBROADCOM_BCM5701)
return;
/*
* When setting the link manually, one side must be the master and
* the other the slave. However ifmedia doesn't give us a good way
* to specify this, so we fake it by using one of the LINK flags.
* If LINK0 is set, we program the PHY to be a master, otherwise
* it's a slave.
*/
if (master) {
PHY_WRITE(sc, BRGPHY_MII_1000CTL,
gig | BRGPHY_1000CTL_MSE | BRGPHY_1000CTL_MSC);
} else {
PHY_WRITE(sc, BRGPHY_MII_1000CTL,
gig | BRGPHY_1000CTL_MSE);
}
}
static void
brgphy_status(struct mii_softc *sc)
{
struct mii_data *mii = sc->mii_pdata;
int aux, bmcr, bmsr;
mii->mii_media_status = IFM_AVALID;
mii->mii_media_active = IFM_ETHER;
aux = PHY_READ(sc, BRGPHY_MII_AUXSTS);
bmcr = PHY_READ(sc, BRGPHY_MII_BMCR);
bmsr = PHY_READ(sc, BRGPHY_MII_BMSR);
if (aux & BRGPHY_AUXSTS_LINK)
mii->mii_media_status |= IFM_ACTIVE;
if (bmcr & BRGPHY_BMCR_LOOP)
mii->mii_media_active |= IFM_LOOP;
if ((bmcr & BRGPHY_BMCR_AUTOEN) &&
(bmsr & BRGPHY_BMSR_ACOMP) == 0) {
/* Erg, still trying, I guess... */
mii->mii_media_active |= IFM_NONE;
return;
}
if (aux & BRGPHY_AUXSTS_LINK) {
switch (aux & BRGPHY_AUXSTS_AN_RES) {
case BRGPHY_RES_1000FD:
mii->mii_media_active |= IFM_1000_T | IFM_FDX;
break;
case BRGPHY_RES_1000HD:
mii->mii_media_active |= IFM_1000_T | IFM_HDX;
break;
case BRGPHY_RES_100FD:
mii->mii_media_active |= IFM_100_TX | IFM_FDX;
break;
case BRGPHY_RES_100T4:
mii->mii_media_active |= IFM_100_T4;
break;
case BRGPHY_RES_100HD:
mii->mii_media_active |= IFM_100_TX | IFM_HDX;
break;
case BRGPHY_RES_10FD:
mii->mii_media_active |= IFM_10_T | IFM_FDX;
break;
case BRGPHY_RES_10HD:
mii->mii_media_active |= IFM_10_T | IFM_HDX;
break;
default:
mii->mii_media_active |= IFM_NONE;
break;
}
} else
mii->mii_media_active |= IFM_NONE;
}
static int
brgphy_mii_phy_auto(struct mii_softc *sc)
{
struct brgphy_softc *bsc = (struct brgphy_softc *)sc;
int ktcr = 0;
brgphy_loop(sc);
brgphy_reset(sc);
ktcr = BRGPHY_1000CTL_AFD | BRGPHY_1000CTL_AHD;
if (bsc->mii_model == MII_MODEL_xxBROADCOM_BCM5701)
ktcr |= BRGPHY_1000CTL_MSE | BRGPHY_1000CTL_MSC;
PHY_WRITE(sc, BRGPHY_MII_1000CTL, ktcr);
ktcr = PHY_READ(sc, BRGPHY_MII_1000CTL);
DELAY(1000);
PHY_WRITE(sc, BRGPHY_MII_ANAR,
BMSR_MEDIA_TO_ANAR(sc->mii_capabilities) | ANAR_CSMA);
DELAY(1000);
PHY_WRITE(sc, BRGPHY_MII_BMCR,
BRGPHY_BMCR_AUTOEN | BRGPHY_BMCR_STARTNEG);
PHY_WRITE(sc, BRGPHY_MII_IMR, 0xFF00);
return (EJUSTRETURN);
}
static void
brgphy_loop(struct mii_softc *sc)
{
int i;
PHY_WRITE(sc, BRGPHY_MII_BMCR, BRGPHY_BMCR_LOOP);
for (i = 0; i < 15000; i++) {
if (!(PHY_READ(sc, BRGPHY_MII_BMSR) & BRGPHY_BMSR_LINK)) {
#if 0
device_printf(sc->mii_dev, "looped %d\n", i);
#endif
break;
}
DELAY(10);
}
}
/*
* Check to see if a 5706 phy is really a SerDes phy. Copied from
* gentbi_probe().
*/
static int
bcm5706_is_tbi(device_t dev)
{
device_t parent;
struct mii_attach_args *ma;
int bmsr, extsr;
parent = device_get_parent(dev);
ma = device_get_ivars(dev);
bmsr = MIIBUS_READREG(parent, ma->mii_phyno, MII_BMSR);
if ((bmsr & BMSR_EXTSTAT) == 0 || (bmsr & BMSR_MEDIAMASK) != 0)
return (0);
extsr = MIIBUS_READREG(parent, ma->mii_phyno, MII_EXTSR);
if (extsr & (EXTSR_1000TFDX|EXTSR_1000THDX))
return (0);
if (extsr & (EXTSR_1000XFDX|EXTSR_1000XHDX))
return (1);
return (0);
}
/* Turn off tap power management on 5401. */
static void
bcm5401_load_dspcode(struct mii_softc *sc)
{
static const struct {
int reg;
uint16_t val;
} dspcode[] = {
{ BRGPHY_MII_AUXCTL, 0x0c20 },
{ BRGPHY_MII_DSP_ADDR_REG, 0x0012 },
{ BRGPHY_MII_DSP_RW_PORT, 0x1804 },
{ BRGPHY_MII_DSP_ADDR_REG, 0x0013 },
{ BRGPHY_MII_DSP_RW_PORT, 0x1204 },
{ BRGPHY_MII_DSP_ADDR_REG, 0x8006 },
{ BRGPHY_MII_DSP_RW_PORT, 0x0132 },
{ BRGPHY_MII_DSP_ADDR_REG, 0x8006 },
{ BRGPHY_MII_DSP_RW_PORT, 0x0232 },
{ BRGPHY_MII_DSP_ADDR_REG, 0x201f },
{ BRGPHY_MII_DSP_RW_PORT, 0x0a20 },
{ 0, 0 },
};
int i;
for (i = 0; dspcode[i].reg != 0; i++)
PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
DELAY(40);
}
static void
bcm5411_load_dspcode(struct mii_softc *sc)
{
static const struct {
int reg;
uint16_t val;
} dspcode[] = {
{ 0x1c, 0x8c23 },
{ 0x1c, 0x8ca3 },
{ 0x1c, 0x8c23 },
{ 0, 0 },
};
int i;
for (i = 0; dspcode[i].reg != 0; i++)
PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}
static void
brgphy_fixup_5704_a0_bug(struct mii_softc *sc)
{
static const struct {
int reg;
uint16_t val;
} dspcode[] = {
{ 0x1c, 0x8d68 },
{ 0x1c, 0x8d68 },
{ 0, 0 },
};
int i;
for (i = 0; dspcode[i].reg != 0; i++)
PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}
static void
brgphy_fixup_adc_bug(struct mii_softc *sc)
{
static const struct {
int reg;
uint16_t val;
} dspcode[] = {
{ BRGPHY_MII_AUXCTL, 0x0c00 },
{ BRGPHY_MII_DSP_ADDR_REG, 0x201f },
{ BRGPHY_MII_DSP_RW_PORT, 0x2aaa },
{ 0, 0 },
};
int i;
for (i = 0; dspcode[i].reg != 0; i++)
PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}
static void
brgphy_fixup_adjust_trim(struct mii_softc *sc)
{
static const struct {
int reg;
uint16_t val;
} dspcode[] = {
{ BRGPHY_MII_AUXCTL, 0x0c00 },
{ BRGPHY_MII_DSP_ADDR_REG, 0x000a },
{ BRGPHY_MII_DSP_RW_PORT, 0x110b },
{ BRGPHY_MII_TEST1, 0x0014 },
{ BRGPHY_MII_AUXCTL, 0x0400 },
{ 0, 0 },
};
int i;
for (i = 0; dspcode[i].reg != 0; i++)
PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}
static void
brgphy_fixup_ber_bug(struct mii_softc *sc)
{
static const struct {
int reg;
uint16_t val;
} dspcode[] = {
{ BRGPHY_MII_AUXCTL, 0x0c00 },
{ BRGPHY_MII_DSP_ADDR_REG, 0x000a },
{ BRGPHY_MII_DSP_RW_PORT, 0x310b },
{ BRGPHY_MII_DSP_ADDR_REG, 0x201f },
{ BRGPHY_MII_DSP_RW_PORT, 0x9506 },
{ BRGPHY_MII_DSP_ADDR_REG, 0x401f },
{ BRGPHY_MII_DSP_RW_PORT, 0x14e2 },
{ BRGPHY_MII_AUXCTL, 0x0400 },
{ 0, 0 },
};
int i;
for (i = 0; dspcode[i].reg != 0; i++)
PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}
static void
brgphy_fixup_crc_bug(struct mii_softc *sc)
{
static const struct {
int reg;
uint16_t val;
} dspcode[] = {
{ BRGPHY_MII_DSP_RW_PORT, 0x0a75 },
{ 0x1c, 0x8c68 },
{ 0x1c, 0x8d68 },
{ 0x1c, 0x8c68 },
{ 0, 0 },
};
int i;
for (i = 0; dspcode[i].reg != 0; i++)
PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}
static void
brgphy_fixup_jitter_bug(struct mii_softc *sc)
{
static const struct {
int reg;
uint16_t val;
} dspcode[] = {
{ BRGPHY_MII_AUXCTL, 0x0c00 },
{ BRGPHY_MII_DSP_ADDR_REG, 0x000a },
{ BRGPHY_MII_DSP_RW_PORT, 0x010b },
{ BRGPHY_MII_AUXCTL, 0x0400 },
{ 0, 0 },
};
int i;
for (i = 0; dspcode[i].reg != 0; i++)
PHY_WRITE(sc, dspcode[i].reg, dspcode[i].val);
}
static void
brgphy_ethernet_wirespeed(struct mii_softc *sc)
{
uint32_t val;
/* Enable Ethernet@WireSpeed. */
PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x7007);
val = PHY_READ(sc, BRGPHY_MII_AUXCTL);
PHY_WRITE(sc, BRGPHY_MII_AUXCTL, val | (1 << 15) | (1 << 4));
}
static void
brgphy_jumbo_settings(struct mii_softc *sc, u_long mtu)
{
struct brgphy_softc *bsc = (struct brgphy_softc *)sc;
uint32_t val;
/* Set or clear jumbo frame settings in the PHY. */
if (mtu > ETHER_MAX_LEN) {
if (bsc->mii_model == MII_MODEL_xxBROADCOM_BCM5401) {
/* BCM5401 PHY cannot read-modify-write. */
PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x4c20);
} else {
PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x7);
val = PHY_READ(sc, BRGPHY_MII_AUXCTL);
PHY_WRITE(sc, BRGPHY_MII_AUXCTL,
val | BRGPHY_AUXCTL_LONG_PKT);
}
val = PHY_READ(sc, BRGPHY_MII_PHY_EXTCTL);
PHY_WRITE(sc, BRGPHY_MII_PHY_EXTCTL,
val | BRGPHY_PHY_EXTCTL_HIGH_LA);
} else {
PHY_WRITE(sc, BRGPHY_MII_AUXCTL, 0x7);
val = PHY_READ(sc, BRGPHY_MII_AUXCTL);
PHY_WRITE(sc, BRGPHY_MII_AUXCTL,
val & ~(BRGPHY_AUXCTL_LONG_PKT | 0x7));
val = PHY_READ(sc, BRGPHY_MII_PHY_EXTCTL);
PHY_WRITE(sc, BRGPHY_MII_PHY_EXTCTL,
val & ~BRGPHY_PHY_EXTCTL_HIGH_LA);
}
}
static void
brgphy_reset(struct mii_softc *sc)
{
struct brgphy_softc *bsc = (struct brgphy_softc *)sc;
struct bge_softc *bge_sc = NULL;
struct bce_softc *bce_sc = NULL;
struct ifnet *ifp;
mii_phy_reset(sc);
switch (bsc->mii_model) {
case MII_MODEL_xxBROADCOM_BCM5400:
bcm5401_load_dspcode(sc);
break;
case MII_MODEL_xxBROADCOM_BCM5401:
if (bsc->mii_rev == 1 || bsc->mii_rev == 3)
bcm5401_load_dspcode(sc);
break;
case MII_MODEL_xxBROADCOM_BCM5411:
bcm5411_load_dspcode(sc);
break;
}
ifp = sc->mii_pdata->mii_ifp;
/* Find the driver associated with this PHY. */
if (strcmp(ifp->if_dname, "bge") == 0) {
bge_sc = ifp->if_softc;
} else if (strcmp(ifp->if_dname, "bce") == 0) {
bce_sc = ifp->if_softc;
}
/* Handle any NetXtreme/bge workarounds. */
if (bge_sc) {
/* Fix up various bugs */
if (bge_sc->bge_flags & BGE_FLAG_5704_A0_BUG)
brgphy_fixup_5704_a0_bug(sc);
if (bge_sc->bge_flags & BGE_FLAG_ADC_BUG)
brgphy_fixup_adc_bug(sc);
if (bge_sc->bge_flags & BGE_FLAG_ADJUST_TRIM)
brgphy_fixup_adjust_trim(sc);
if (bge_sc->bge_flags & BGE_FLAG_BER_BUG)
brgphy_fixup_ber_bug(sc);
if (bge_sc->bge_flags & BGE_FLAG_CRC_BUG)
brgphy_fixup_crc_bug(sc);
if (bge_sc->bge_flags & BGE_FLAG_JITTER_BUG)
brgphy_fixup_jitter_bug(sc);
brgphy_jumbo_settings(sc, ifp->if_mtu);
/*
* Don't enable Ethernet@WireSpeed for the 5700 or the
* 5705 A1 and A2 chips.
*/
if (bge_sc->bge_asicrev != BGE_ASICREV_BCM5700 &&
bge_sc->bge_chipid != BGE_CHIPID_BCM5705_A1 &&
bge_sc->bge_chipid != BGE_CHIPID_BCM5705_A2)
brgphy_ethernet_wirespeed(sc);
/* Enable Link LED on Dell boxes */
if (bge_sc->bge_flags & BGE_FLAG_NO_3LED) {
PHY_WRITE(sc, BRGPHY_MII_PHY_EXTCTL,
PHY_READ(sc, BRGPHY_MII_PHY_EXTCTL) &
~BRGPHY_PHY_EXTCTL_3_LED);
}
} else if (bce_sc) {
brgphy_fixup_ber_bug(sc);
brgphy_jumbo_settings(sc, ifp->if_mtu);
brgphy_ethernet_wirespeed(sc);
}
}