freebsd-dev/sys/dev/pccbb/pccbb_isa.c
Marius Strobl 4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00

245 lines
7.8 KiB
C

/*-
* Copyright (c) 2002-2004 M. Warner Losh.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* Driver for ISA to PCMCIA bridges compliant with the Intel ExCA
* specification.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/proc.h>
#include <sys/condvar.h>
#include <sys/errno.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <sys/sysctl.h>
#include <sys/kthread.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <isa/isavar.h>
#include <dev/pccard/pccardreg.h>
#include <dev/pccard/pccardvar.h>
#include <dev/exca/excareg.h>
#include <dev/exca/excavar.h>
#include <dev/pccbb/pccbbreg.h>
#include <dev/pccbb/pccbbvar.h>
#include "power_if.h"
#include "card_if.h"
/*****************************************************************************
* Configurable parameters.
*****************************************************************************/
/* sysctl vars */
static SYSCTL_NODE(_hw, OID_AUTO, pcic, CTLFLAG_RD, 0, "PCIC parameters");
static int isa_intr_mask = EXCA_INT_MASK_ALLOWED;
TUNABLE_INT("hw.cbb.intr_mask", &isa_intr_mask);
SYSCTL_INT(_hw_pcic, OID_AUTO, intr_mask, CTLFLAG_RD, &isa_intr_mask, 0,
"Mask of allowable interrupts for this laptop. The default is generally\n\
correct, but some laptops do not route all the IRQ pins to the bridge to\n\
save wires. Sometimes you need a more restrictive mask because some of the\n\
hardware in your laptop may not have a driver so its IRQ might not be\n\
allocated.");
/*
* CL-PD6722's VSENSE method
* 0: NO VSENSE (assume a 5.0V card always)
* 1: 6710's method (default)
* 2: 6729's method
*/
int pcic_pd6722_vsense = 1;
TUNABLE_INT("hw.pcic.pd6722_vsense", &pcic_pd6722_vsense);
SYSCTL_INT(_hw_pcic, OID_AUTO, pd6722_vsense, CTLFLAG_RDTUN,
&pcic_pd6722_vsense, 1,
"Select CL-PD6722's VSENSE method. VSENSE is used to determine the\n\
volatage of inserted cards. The CL-PD6722 has two methods to determine the\n\
voltage of the card. 0 means assume a 5.0V card and do not check. 1 means\n\
use the same method that the CL-PD6710 uses (default). 2 means use the\n\
same method as the CL-PD6729. 2 is documented in the datasheet as being\n\
the correct way, but 1 seems to give better results on more laptops.");
/*****************************************************************************
* End of configurable parameters.
*****************************************************************************/
#define DPRINTF(x) do { if (cbb_debug) printf x; } while (0)
#define DEVPRINTF(x) do { if (cbb_debug) device_printf x; } while (0)
/* XXX Not sure that PNP0E03 should be claimed, except maybe on pc98 */
static struct isa_pnp_id pcic_ids[] = {
{EXCA_PNP_ACTIONTEC, NULL}, /* AEI0218 */
{EXCA_PNP_IBM3765, NULL}, /* IBM3765 */
{EXCA_PNP_82365, NULL}, /* PNP0E00 */
{EXCA_PNP_CL_PD6720, NULL}, /* PNP0E01 */
{EXCA_PNP_VLSI_82C146, NULL}, /* PNP0E02 */
{EXCA_PNP_82365_CARDBUS, NULL}, /* PNP0E03 */
{EXCA_PNP_SCM_SWAPBOX, NULL}, /* SCM0469 */
{EXCA_NEC_PC9801_102, NULL}, /* NEC8091 */
{EXCA_NEC_PC9821RA_E01, NULL}, /* NEC8121 */
{0}
};
/************************************************************************/
/* Probe/Attach */
/************************************************************************/
static int
cbb_isa_activate(device_t dev)
{
struct cbb_softc *sc = device_get_softc(dev);
struct resource *res;
int rid;
int i;
/* A little bogus, but go ahead and get the irq for CSC events */
rid = 0;
res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid, RF_ACTIVE);
if (res == NULL) {
/*
* No IRQ specified, find one. This can be due to the PnP
* data not specifying any IRQ, or the default kernel not
* assinging an IRQ.
*/
for (i = 0; i < 16 && res == NULL; i++) {
if (((1 << i) & isa_intr_mask) == 0)
continue;
res = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, i, i,
1, RF_ACTIVE);
}
}
if (res == NULL)
return (ENXIO);
sc->irq_res = res;
rid = 0;
res = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &rid, RF_ACTIVE);
if (res == NULL) {
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->irq_res);
sc->irq_res = NULL;
device_printf(dev, "Cannot allocate I/O\n");
return (ENOMEM);
}
sc->bst = rman_get_bustag(res);
sc->bsh = rman_get_bushandle(res);
sc->base_res = res;
return (0);
}
static void
cbb_isa_deactivate(device_t dev)
{
struct cbb_softc *sc = device_get_softc(dev);
if (sc->irq_res)
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->irq_res);
sc->irq_res = NULL;
if (sc->base_res)
bus_release_resource(dev, SYS_RES_IOPORT, 0, sc->base_res);
sc->base_res = NULL;
}
static int
cbb_isa_probe(device_t dev)
{
int error;
struct cbb_softc *sc = device_get_softc(dev);
/* Check isapnp ids */
error = ISA_PNP_PROBE(device_get_parent(dev), dev, pcic_ids);
if (error != 0 && error != ENOENT)
return (error);
error = cbb_isa_activate(dev);
if (error != 0)
return (error);
/* Check to make sure that we have actual hardware */
error = exca_probe_slots(dev, &sc->exca[0], sc->bst, sc->bsh);
cbb_isa_deactivate(dev);
return (error);
}
static int
cbb_isa_attach(device_t dev)
{
return (ENOMEM);
}
static device_method_t cbb_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, cbb_isa_probe),
DEVMETHOD(device_attach, cbb_isa_attach),
DEVMETHOD(device_detach, cbb_detach),
DEVMETHOD(device_suspend, cbb_suspend),
DEVMETHOD(device_resume, cbb_resume),
/* bus methods */
DEVMETHOD(bus_read_ivar, cbb_read_ivar),
DEVMETHOD(bus_write_ivar, cbb_write_ivar),
DEVMETHOD(bus_alloc_resource, cbb_alloc_resource),
DEVMETHOD(bus_release_resource, cbb_release_resource),
DEVMETHOD(bus_activate_resource, cbb_activate_resource),
DEVMETHOD(bus_deactivate_resource, cbb_deactivate_resource),
DEVMETHOD(bus_driver_added, cbb_driver_added),
DEVMETHOD(bus_child_detached, cbb_child_detached),
DEVMETHOD(bus_setup_intr, cbb_setup_intr),
DEVMETHOD(bus_teardown_intr, cbb_teardown_intr),
DEVMETHOD(bus_child_present, cbb_child_present),
/* 16-bit card interface */
DEVMETHOD(card_set_res_flags, cbb_pcic_set_res_flags),
DEVMETHOD(card_set_memory_offset, cbb_pcic_set_memory_offset),
/* power interface */
DEVMETHOD(power_enable_socket, cbb_power_enable_socket),
DEVMETHOD(power_disable_socket, cbb_power_disable_socket),
DEVMETHOD_END
};
static driver_t cbb_isa_driver = {
"cbb",
cbb_methods,
sizeof(struct cbb_softc)
};
DRIVER_MODULE(cbb, isa, cbb_isa_driver, cbb_devclass, 0, 0);
MODULE_DEPEND(cbb, exca, 1, 1, 1);