freebsd-dev/sys/i4b/layer1/isic/i4b_ctx_s0P.c
Hellmuth Michaelis b5dd89c336 remove redundant definitions of card types:
- remove all occurances of FLAG_XXX values and replace with CARD_TYPEP_XXX
 - remove sc_flag from isic softc and replace it with sc_cardtyp
remove some left over redundant definitions from isic and i4b_l1.h
remove left over cvs id from i4b cvs repository
2001-01-24 08:41:52 +00:00

250 lines
7.9 KiB
C

/*
* Copyright (c) 1997, 2001 Hellmuth Michaelis. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*---------------------------------------------------------------------------
*
* isic - I4B Siemens ISDN Chipset Driver for Creatix/Teles PnP
* ============================================================
*
* $FreeBSD$
*
* last edit-date: [Wed Jan 24 09:07:22 2001]
*
* Note: this driver works for the Creatix ISDN S0-16 P+P and
* for the Teles S0/16.3 PnP card. Although they are not
* the same hardware and don't share the same PnP config
* information, once the base addresses are set, the
* offsets are same and therefore they can use the same
* driver.
*
*---------------------------------------------------------------------------*/
#include "isic.h"
#include "opt_i4b.h"
#if (NISIC > 0) && (defined(CRTX_S0_P) || defined(TEL_S0_16_3_P))
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/socket.h>
#include <net/if.h>
#include <machine/i4b_ioctl.h>
#include <machine/i4b_trace.h>
#include <i4b/layer1/i4b_l1.h>
#include <i4b/layer1/isic/i4b_isic.h>
#include <i4b/layer1/isic/i4b_hscx.h>
/*---------------------------------------------------------------------------*
* Creatix / Teles PnP ISAC get fifo routine
*---------------------------------------------------------------------------*/
static void
ctxs0P_read_fifo(struct l1_softc *sc, int what, void *buf, size_t size)
{
bus_space_tag_t t = rman_get_bustag(sc->sc_resources.io_base[what+2]);
bus_space_handle_t h = rman_get_bushandle(sc->sc_resources.io_base[what+2]);
bus_space_read_multi_1(t,h,0x3e,buf,size);
}
/*---------------------------------------------------------------------------*
* Creatix / Teles PnP ISAC put fifo routine
*---------------------------------------------------------------------------*/
static void
ctxs0P_write_fifo(struct l1_softc *sc, int what, void *buf, size_t size)
{
bus_space_tag_t t = rman_get_bustag(sc->sc_resources.io_base[what+2]);
bus_space_handle_t h = rman_get_bushandle(sc->sc_resources.io_base[what+2]);
bus_space_write_multi_1(t,h,0x3e,buf,size);
}
/*---------------------------------------------------------------------------*
* Creatix / Teles PnP ISAC put register routine
*---------------------------------------------------------------------------*/
static void
ctxs0P_write_reg(struct l1_softc *sc, int what, bus_size_t offs, u_int8_t data)
{
bus_space_tag_t t = rman_get_bustag(sc->sc_resources.io_base[what+2]);
bus_space_handle_t h = rman_get_bushandle(sc->sc_resources.io_base[what+2]);
bus_space_write_1(t,h,offs,data);
}
/*---------------------------------------------------------------------------*
* Creatix / Teles PnP ISAC get register routine
*---------------------------------------------------------------------------*/
static u_int8_t
ctxs0P_read_reg(struct l1_softc *sc, int what, bus_size_t offs)
{
bus_space_tag_t t = rman_get_bustag(sc->sc_resources.io_base[what+2]);
bus_space_handle_t h = rman_get_bushandle(sc->sc_resources.io_base[what+2]);
return bus_space_read_1(t,h,offs);
}
/*---------------------------------------------------------------------------*
* isic_attach_Cs0P - attach Creatix / Teles PnP
*---------------------------------------------------------------------------*/
int
isic_attach_Cs0P(device_t dev)
{
u_int32_t iobase1;
u_int32_t iobase2;
int unit = device_get_unit(dev);
struct l1_softc *sc = &l1_sc[unit];
bus_space_tag_t t;
bus_space_handle_t h;
/*
* this card needs a second io_base,
* free resources if we don't get it
*/
sc->sc_resources.io_rid[1] = 1;
if(!(sc->sc_resources.io_base[1] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[1],
0UL, ~0UL, 1, RF_ACTIVE)))
{
printf("isic%d: Could not get io area 1 for Creatix / Teles PnP!\n", unit);
isic_detach_common(dev);
return ENXIO;
}
/* remember the io base addresses */
iobase1 = rman_get_start(sc->sc_resources.io_base[0]);
iobase2 = rman_get_start(sc->sc_resources.io_base[1]);
/*
* because overlapping resources are invalid,
* release the first io port resource
*/
bus_release_resource(dev, SYS_RES_IOPORT, sc->sc_resources.io_rid[0],
sc->sc_resources.io_base[0]);
/* set and allocate a base io address for the ISAC chip */
sc->sc_resources.io_rid[2] = 2;
bus_set_resource(dev, SYS_RES_IOPORT, 2, iobase1-0x20, 0x40);
if(!(sc->sc_resources.io_base[2] =
bus_alloc_resource(dev, SYS_RES_IOPORT,
&sc->sc_resources.io_rid[2],
0ul, ~0ul, 1, RF_ACTIVE)))
{
printf("isic%d: Could not get io area 2 for Creatix / Teles PnP!\n", unit);
isic_detach_common(dev);
return ENXIO;
}
/*
* because overlapping resources are invalid,
* release the second io port resource
*/
bus_release_resource(dev, SYS_RES_IOPORT, sc->sc_resources.io_rid[1],
sc->sc_resources.io_base[1]);
/* set and allocate a resource for the HSCX channel A */
sc->sc_resources.io_rid[3] = 3;
/*XXX*/ /* FIXME !!!!
* the width of the resource is too small, there are accesses
* to it with an offset of 0x3e into the next resource. anyway,
* it seems to work and i have no idea how to do 2 resources
* overlapping each other.
*/
#if 0
bus_set_resource(dev, SYS_RES_IOPORT, 3, iobase2-0x20, 0x20);
#else
bus_set_resource(dev, SYS_RES_IOPORT, 3, iobase2-0x20, 0x10);
#endif
if(!(sc->sc_resources.io_base[3] =
bus_alloc_resource(dev,SYS_RES_IOPORT,
&sc->sc_resources.io_rid[3],
0ul,~0ul, 1, RF_ACTIVE)))
{
printf("isic%d: Could not get io area 3 for Creatix / Teles PnP!\n", unit);
isic_detach_common(dev);
return ENXIO;
}
/* set and allocate a resources for the HSCX channel B */
sc->sc_resources.io_rid[4] = 4;
bus_set_resource(dev, SYS_RES_IOPORT, 4, iobase2, 0x40);
if(!(sc->sc_resources.io_base[4] =
bus_alloc_resource(dev,SYS_RES_IOPORT,
&sc->sc_resources.io_rid[4],
0ul, ~0ul, 1, RF_ACTIVE)))
{
printf("isic%d: Could not get io area 4 for Creatix / Teles PnP!\n", unit);
isic_detach_common(dev);
return ENXIO;
}
/* setup access routines */
sc->clearirq = NULL;
sc->readreg = ctxs0P_read_reg;
sc->writereg = ctxs0P_write_reg;
sc->readfifo = ctxs0P_read_fifo;
sc->writefifo = ctxs0P_write_fifo;
/* setup card type */
sc->sc_cardtyp = CARD_TYPEP_CS0P;
/* setup IOM bus type */
sc->sc_bustyp = BUS_TYPE_IOM2;
sc->sc_ipac = 0;
sc->sc_bfifolen = HSCX_FIFO_LEN;
/* enable the card */
t = rman_get_bustag(sc->sc_resources.io_base[2]);
h = rman_get_bushandle(sc->sc_resources.io_base[2]);
bus_space_write_1(t, h, 0x3c, 0);
DELAY(SEC_DELAY / 10);
bus_space_write_1(t, h, 0x3c, 1);
DELAY(SEC_DELAY / 10);
return 0;
}
#endif /* (NISIC > 0) && (defined(CRTX_S0_P) || defined(TEL_S0_16_3_P)) */