brooks 4290fbacd1 Replace the if_name and if_unit members of struct ifnet with new members ... if_xname, if_dname, and if_dunit. if_xname is the name of the interface and if_dname/unit are the driver name and instance. This change paves the way for interface renaming and enhanced pseudo device creation and configuration symantics. Approved By: re (in principle) Reviewed By: njl, imp Tested On: i386, amd64, sparc64 Obtained From: NetBSD (if_xname)		2003-10-31 18:32:15 +00:00
..
acphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
acphyreg.h
amphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
amphyreg.h
bmtphy.c	Add a device driver for the Broadcom BCM4401 ethernet controller,	2003-09-09 18:17:23 +00:00
bmtphyreg.h	Add a driver for the Broadcom BCM52xx "mini-theta" PHY. This includes the	2002-07-05 11:07:24 +00:00
brgphy.c	Replace the if_name and if_unit members of struct ifnet with new members	2003-10-31 18:32:15 +00:00
brgphyreg.h	Fix bge at 10Mbit. The defines for 10-Half and 10-Full were swapped.	2003-06-17 15:02:28 +00:00
dcphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
e1000phy.c	Add support for SK-9521 V2.0 and 3COM 3C940.	2003-09-20 10:53:08 +00:00
e1000phyreg.h	Add support for SK-9521 V2.0 and 3COM 3C940.	2003-09-20 10:53:08 +00:00
exphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
inphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
inphyreg.h
lxtphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
lxtphyreg.h
mii_physubr.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
mii.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
mii.h	Move a lot closer to NetBSDs MII support for GigE.	2002-04-29 11:57:30 +00:00
miibus_if.m
miidevs	Add support for SK-9521 V2.0 and 3COM 3C940.	2003-09-20 10:53:08 +00:00
miivar.h	Clean up mii/phy drivers: Remove the MIIF_DOINGAUTO which doesn't really	2002-05-04 11:00:30 +00:00
mlphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
nsgphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
nsgphyreg.h	Move a lot closer to NetBSDs MII support for GigE.	2002-04-29 11:57:30 +00:00
nsphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
nsphyreg.h
pnaphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
pnphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
qsphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
qsphyreg.h
rgephy.c	Clean up dead code.	2003-09-11 08:28:38 +00:00
rgephyreg.h	Add a PHY driver to support the built-in gigE PHY in the 8169S/8110S	2003-09-11 03:53:46 +00:00
rlphy.c	Take the support for the 8139C+/8169/8169S/8110S chips out of the	2003-09-08 02:11:25 +00:00
ruephy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
ruephyreg.h	Add RealTek RTL8150 USB to fast Ethernet controller driver.	2003-05-03 10:16:56 +00:00
tdkphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
tdkphyreg.h
tlphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
tlphyreg.h
ukphy_subr.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
ukphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
xmphy.c	Use __FBSDID().	2003-08-24 17:55:58 +00:00
xmphyreg.h	Fix reversed definitions for the bits that select half vs. full duplex.	2002-01-10 18:06:41 +00:00