freebsd-dev/sys/dev/usb/umct.c
MIHIRA Sanpei Yoshiro 9caf2e9831 Add support for Belkin F5U409 serial-usb adapter
PR:              kern/69804
Submitted by:    Dan Nelson <dnelson@allantgroup.com>
2004-08-07 23:45:04 +00:00

518 lines
13 KiB
C

/*-
* Copyright (c) 2003 Scott Long
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Driver for the MCT (Magic Control Technology) USB-RS232 Converter.
* Based on the superb documentation from the linux mct_u232 driver by
* Wolfgang Grandeggar <wolfgang@cec.ch>.
* This device smells a lot like the Belkin F5U103, except that it has
* suffered some mild brain-damage. This driver is based off of the ubsa.c
* driver from Alexander Kabaev <kan@freebsd.org>. Merging the two together
* might be useful, though the subtle differences might lead to lots of
* #ifdef's.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/tty.h>
#include <sys/interrupt.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include "usbdevs.h"
#include <dev/usb/ucomvar.h>
/* The UMCT advertises the standard 8250 UART registers */
#define UMCT_GET_MSR 2 /* Get Modem Status Register */
#define UMCT_GET_MSR_SIZE 1
#define UMCT_GET_LCR 6 /* Get Line Control Register */
#define UMCT_GET_LCR_SIZE 1
#define UMCT_SET_BAUD 5 /* Set the Baud Rate Divisor */
#define UMCT_SET_BAUD_SIZE 4
#define UMCT_SET_LCR 7 /* Set Line Control Register */
#define UMCT_SET_LCR_SIZE 1
#define UMCT_SET_MCR 10 /* Set Modem Control Register */
#define UMCT_SET_MCR_SIZE 1
#define UMCT_INTR_INTERVAL 100
#define UMCT_IFACE_INDEX 0
#define UMCT_CONFIG_INDEX 1
struct umct_softc {
struct ucom_softc sc_ucom;
int sc_iface_number;
usbd_interface_handle sc_intr_iface;
int sc_intr_number;
usbd_pipe_handle sc_intr_pipe;
u_char *sc_intr_buf;
int sc_isize;
uint8_t sc_lsr;
uint8_t sc_msr;
uint8_t sc_lcr;
uint8_t sc_mcr;
void *sc_swicookie;
};
Static void umct_intr(usbd_xfer_handle, usbd_private_handle, usbd_status);
Static void umct_get_status(void *, int, u_char *, u_char *);
Static void umct_set(void *, int, int, int);
Static int umct_param(void *, int, struct termios *);
Static int umct_open(void *, int);
Static void umct_close(void *, int);
Static void umct_notify(void *);
Static struct ucom_callback umct_callback = {
umct_get_status, /* ucom_get_status */
umct_set, /* ucom_set */
umct_param, /* ucom_param */
NULL, /* ucom_ioctl */
umct_open, /* ucom_open */
umct_close, /* ucom_close */
NULL, /* ucom_read */
NULL /* ucom_write */
};
Static const struct umct_product {
uint16_t vendor;
uint16_t product;
} umct_products[] = {
{ USB_VENDOR_MCT, USB_PRODUCT_MCT_USB232 },
{ USB_VENDOR_MCT, USB_PRODUCT_MCT_SITECOM_USB232 },
{ USB_VENDOR_MCT, USB_PRODUCT_MCT_DU_H3SP_USB232 },
{ USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_F5U109 },
{ USB_VENDOR_BELKIN, USB_PRODUCT_BELKIN_F5U409 },
{ 0, 0 }
};
Static device_probe_t umct_match;
Static device_attach_t umct_attach;
Static device_detach_t umct_detach;
Static device_method_t umct_methods[] = {
DEVMETHOD(device_probe, umct_match),
DEVMETHOD(device_attach, umct_attach),
DEVMETHOD(device_detach, umct_detach),
{ 0, 0 }
};
Static driver_t umct_driver = {
"ucom",
umct_methods,
sizeof(struct umct_softc)
};
DRIVER_MODULE(umct, uhub, umct_driver, ucom_devclass, usbd_driver_load, 0);
MODULE_DEPEND(umct, usb, 1, 1, 1);
MODULE_DEPEND(umct, ucom, UCOM_MINVER, UCOM_PREFVER, UCOM_MAXVER);
MODULE_VERSION(umct, 1);
Static struct ithd *umct_ithd;
USB_MATCH(umct)
{
USB_MATCH_START(umct, uaa);
int i;
if (uaa->iface != NULL)
return (UMATCH_NONE);
for (i = 0; umct_products[i].vendor != 0; i++) {
if (umct_products[i].vendor == uaa->vendor &&
umct_products[i].product == uaa->product) {
return (UMATCH_VENDOR_PRODUCT);
}
}
return (UMATCH_NONE);
}
USB_ATTACH(umct)
{
USB_ATTACH_START(umct, sc, uaa);
usbd_device_handle dev;
struct ucom_softc *ucom;
usb_config_descriptor_t *cdesc;
usb_interface_descriptor_t *id;
usb_endpoint_descriptor_t *ed;
char *devinfo;
const char *devname;
usbd_status err;
int i;
dev = uaa->device;
devinfo = malloc(1024, M_USBDEV, M_NOWAIT | M_ZERO);
if (devinfo == NULL)
return (ENOMEM);
bzero(sc, sizeof(struct umct_softc));
ucom = &sc->sc_ucom;
ucom->sc_dev = self;
ucom->sc_udev = dev;
ucom->sc_iface = uaa->iface;
usbd_devinfo(dev, 0, devinfo);
device_set_desc_copy(self, devinfo);
devname = USBDEVNAME(ucom->sc_dev);
printf("%s: %s\n", devname, devinfo);
ucom->sc_bulkout_no = -1;
ucom->sc_bulkin_no = -1;
sc->sc_intr_number = -1;
sc->sc_intr_pipe = NULL;
err = usbd_set_config_index(dev, UMCT_CONFIG_INDEX, 1);
if (err) {
printf("%s: failed to set configuration: %s\n",
devname, usbd_errstr(err));
ucom->sc_dying = 1;
goto error;
}
cdesc = usbd_get_config_descriptor(ucom->sc_udev);
if (cdesc == NULL) {
printf("%s: failed to get configuration descriptor\n", devname);
ucom->sc_dying = 1;
goto error;
}
err = usbd_device2interface_handle(dev, UMCT_IFACE_INDEX,
&ucom->sc_iface);
if (err) {
printf("%s: failed to get interface: %s\n", devname,
usbd_errstr(err));
ucom->sc_dying = 1;
goto error;
}
id = usbd_get_interface_descriptor(ucom->sc_iface);
sc->sc_iface_number = id->bInterfaceNumber;
for (i = 0; i < id->bNumEndpoints; i++) {
ed = usbd_interface2endpoint_descriptor(ucom->sc_iface, i);
if (ed == NULL) {
printf("%s: no endpoint descriptor for %d\n",
devname, i);
ucom->sc_dying = 1;
goto error;
}
/*
* The real bulk-in endpoint is also marked as an interrupt.
* The only way to differentiate it from the real interrupt
* endpoint is to look at the wMaxPacketSize field.
*/
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN) {
if (UGETW(ed->wMaxPacketSize) == 0x2) {
sc->sc_intr_number = ed->bEndpointAddress;
sc->sc_isize = UGETW(ed->wMaxPacketSize);
} else {
ucom->sc_bulkin_no = ed->bEndpointAddress;
ucom->sc_ibufsize = UGETW(ed->wMaxPacketSize);
}
continue;
}
if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT) {
ucom->sc_bulkout_no = ed->bEndpointAddress;
if (uaa->product == USB_PRODUCT_MCT_SITECOM_USB232)
ucom->sc_obufsize = 16; /* device is broken */
else
ucom->sc_obufsize = UGETW(ed->wMaxPacketSize);
continue;
}
printf("%s: warning - unsupported endpoint 0x%x\n", devname,
ed->bEndpointAddress);
}
if (sc->sc_intr_number == -1) {
printf("%s: Could not fint interrupt in\n", devname);
ucom->sc_dying = 1;
goto error;
}
sc->sc_intr_iface = ucom->sc_iface;
if (ucom->sc_bulkout_no == -1) {
printf("%s: Could not find data bulk out\n", devname);
ucom->sc_dying = 1;
goto error;
}
ucom->sc_parent = sc;
ucom->sc_portno = UCOM_UNK_PORTNO;
ucom->sc_opkthdrlen = 0;
ucom->sc_callback = &umct_callback;
ucom_attach(ucom);
swi_add(&umct_ithd, "ucom", umct_notify, sc, SWI_TTY, 0,
&sc->sc_swicookie);
free(devinfo, M_USBDEV);
USB_ATTACH_SUCCESS_RETURN;
error:
free(devinfo, M_USBDEV);
USB_ATTACH_ERROR_RETURN;
}
USB_DETACH(umct)
{
USB_DETACH_START(umct, sc);
int rv;
if (sc->sc_intr_pipe != NULL) {
usbd_abort_pipe(sc->sc_intr_pipe);
usbd_close_pipe(sc->sc_intr_pipe);
free(sc->sc_intr_buf, M_USBDEV);
sc->sc_intr_pipe = NULL;
}
sc->sc_ucom.sc_dying = 1;
ithread_remove_handler(sc->sc_swicookie);
rv = ucom_detach(&sc->sc_ucom);
return (rv);
}
Static int
umct_request(struct umct_softc *sc, uint8_t request, int len, uint32_t value)
{
usb_device_request_t req;
usbd_status err;
uint8_t oval[4];
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
req.bRequest = request;
USETW(req.wValue, 0);
USETW(req.wIndex, sc->sc_iface_number);
USETW(req.wLength, len);
USETDW(oval, value);
err = usbd_do_request(sc->sc_ucom.sc_udev, &req, oval);
if (err)
printf("%s: ubsa_request: %s\n",
USBDEVNAME(sc->sc_ucom.sc_dev), usbd_errstr(err));
return (err);
}
Static void
umct_intr(usbd_xfer_handle xfer, usbd_private_handle priv, usbd_status status)
{
struct umct_softc *sc;
u_char *buf;
sc = (struct umct_softc *)priv;
buf = sc->sc_intr_buf;
if (sc->sc_ucom.sc_dying)
return;
if (status != USBD_NORMAL_COMPLETION) {
if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
return;
usbd_clear_endpoint_stall_async(sc->sc_intr_pipe);
return;
}
sc->sc_msr = buf[0];
sc->sc_lsr = buf[1];
/*
* Defer notifying the ucom layer as it doesn't like to be bothered
* from an interrupt context.
*/
swi_sched(sc->sc_swicookie, 0);
}
Static void
umct_notify(void *arg)
{
struct umct_softc *sc;
sc = (struct umct_softc *)arg;
if (sc->sc_ucom.sc_dying == 0)
ucom_status_change(&sc->sc_ucom);
}
Static void
umct_get_status(void *addr, int portno, u_char *lsr, u_char *msr)
{
struct umct_softc *sc;
sc = addr;
if (lsr != NULL)
*lsr = sc->sc_lsr;
if (msr != NULL)
*msr = sc->sc_msr;
return;
}
Static void
umct_set(void *addr, int portno, int reg, int onoff)
{
struct umct_softc *sc;
sc = addr;
switch (reg) {
case UCOM_SET_BREAK:
sc->sc_lcr &= ~0x40;
sc->sc_lcr |= (onoff) ? 0x40 : 0;
umct_request(sc, UMCT_SET_LCR, UMCT_SET_LCR_SIZE, sc->sc_lcr);
break;
case UCOM_SET_DTR:
sc->sc_mcr &= ~0x01;
sc->sc_mcr |= (onoff) ? 0x01 : 0;
umct_request(sc, UMCT_SET_MCR, UMCT_SET_MCR_SIZE, sc->sc_mcr);
break;
case UCOM_SET_RTS:
sc->sc_mcr &= ~0x2;
sc->sc_mcr |= (onoff) ? 0x02 : 0;
umct_request(sc, UMCT_SET_MCR, UMCT_SET_MCR_SIZE, sc->sc_mcr);
break;
default:
break;
}
}
Static int
umct_calc_baud(u_int baud)
{
switch(baud) {
case B300: return (0x1);
case B600: return (0x2);
case B1200: return (0x3);
case B2400: return (0x4);
case B4800: return (0x6);
case B9600: return (0x8);
case B19200: return (0x9);
case B38400: return (0xa);
case B57600: return (0xb);
case 115200: return (0xc);
case B0:
default:
break;
}
return (0x0);
}
Static int
umct_param(void *addr, int portno, struct termios *ti)
{
struct umct_softc *sc;
uint32_t value;
sc = addr;
value = umct_calc_baud(ti->c_ospeed);
umct_request(sc, UMCT_SET_BAUD, UMCT_SET_BAUD_SIZE, value);
value = sc->sc_lcr & 0x40;
switch (ti->c_cflag & CSIZE) {
case CS5: value |= 0x0; break;
case CS6: value |= 0x1; break;
case CS7: value |= 0x2; break;
case CS8: value |= 0x3; break;
default: value |= 0x0; break;
}
value |= (ti->c_cflag & CSTOPB) ? 0x4 : 0;
if (ti->c_cflag & PARENB) {
value |= 0x8;
value |= (ti->c_cflag & PARODD) ? 0x0 : 0x10;
}
/*
* XXX There doesn't seem to be a way to tell the device to use flow
* control.
*/
sc->sc_lcr = value;
umct_request(sc, UMCT_SET_LCR, UMCT_SET_LCR_SIZE, value);
return (0);
}
Static int
umct_open(void *addr, int portno)
{
struct umct_softc *sc;
int err;
sc = addr;
if (sc->sc_ucom.sc_dying) {
return (ENXIO);
}
if (sc->sc_intr_number != -1 && sc->sc_intr_pipe == NULL) {
sc->sc_intr_buf = malloc(sc->sc_isize, M_USBDEV, M_WAITOK);
err = usbd_open_pipe_intr(sc->sc_intr_iface, sc->sc_intr_number,
USBD_SHORT_XFER_OK, &sc->sc_intr_pipe, sc, sc->sc_intr_buf,
sc->sc_isize, umct_intr, UMCT_INTR_INTERVAL);
if (err) {
printf("%s: cannot open interrupt pipe (addr %d)\n",
USBDEVNAME(sc->sc_ucom.sc_dev),
sc->sc_intr_number);
free(sc->sc_intr_buf, M_USBDEV);
return (EIO);
}
}
return (0);
}
Static void
umct_close(void *addr, int portno)
{
struct umct_softc *sc;
int err;
sc = addr;
if (sc->sc_ucom.sc_dying)
return;
if (sc->sc_intr_pipe != NULL) {
err = usbd_abort_pipe(sc->sc_intr_pipe);
if (err)
printf("%s: abort interrupt pipe failed: %s\n",
USBDEVNAME(sc->sc_ucom.sc_dev), usbd_errstr(err));
err = usbd_close_pipe(sc->sc_intr_pipe);
if (err)
printf("%s: close interrupt pipe failed: %s\n",
USBDEVNAME(sc->sc_ucom.sc_dev), usbd_errstr(err));
free(sc->sc_intr_buf, M_USBDEV);
sc->sc_intr_pipe = NULL;
}
}