freebsd-dev/sys/mips/atheros/ar71xx_ohci.c
Adrian Chadd c37904e8ba Reshuffle all of the DDR flush operations into a single switch/mux,
and start teaching subsystems about it.

The Atheros MIPS platforms don't guarantee any kind of FIFO consistency
with interrupts in hardware.  So software needs to do a flush when it
receives an interrupt and before it calls the interrupt handler.

There are new ones for the QCA934x and QCA955x, so do a few things:

* Get rid of the individual ones (for ethernet and IP2);
* Create a mux and enum listing all the variations on DDR flushes;
* replace the uses of IP2 with the relevant one (which will typically
  be "PCI" here);
* call the USB DDR flush before calling the real USB interrupt handlers;
* call the ethernet one upon receiving an interrupt that's for us,
  rather than never calling it during operation.

Tested:

* QCA9558 (TP-Link archer c7 v2)
* AR9331 (Carambola 2)

TODO:

* PCI, USB, ethernet, etc need to do a double-check to see if the
  interrupt was truely for them before doing the DDR.  For now I
  prefer "correct" over "fast".
2015-07-04 03:05:57 +00:00

227 lines
6.3 KiB
C

/*-
* Copyright (c) 2009, Oleksandr Tymoshenko <gonzo@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <sys/condvar.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usb_core.h>
#include <dev/usb/usb_busdma.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/usb_util.h>
#include <dev/usb/usb_controller.h>
#include <dev/usb/usb_bus.h>
#include <dev/usb/controller/ohci.h>
#include <dev/usb/controller/ohcireg.h>
#include <mips/atheros/ar71xxreg.h> /* for stuff in ar71xx_cpudef.h */
#include <mips/atheros/ar71xx_cpudef.h>
static int ar71xx_ohci_attach(device_t dev);
static int ar71xx_ohci_detach(device_t dev);
static int ar71xx_ohci_probe(device_t dev);
struct ar71xx_ohci_softc
{
struct ohci_softc sc_ohci;
};
static int
ar71xx_ohci_probe(device_t dev)
{
device_set_desc(dev, "AR71XX integrated OHCI controller");
return (BUS_PROBE_DEFAULT);
}
static void
ar71xx_ohci_intr(void *arg)
{
/* XXX TODO: should really see if this was our interrupt.. */
ar71xx_device_flush_ddr(AR71XX_CPU_DDR_FLUSH_USB);
ohci_interrupt(arg);
}
static int
ar71xx_ohci_attach(device_t dev)
{
struct ar71xx_ohci_softc *sc = device_get_softc(dev);
int err;
int rid;
/* initialise some bus fields */
sc->sc_ohci.sc_bus.parent = dev;
sc->sc_ohci.sc_bus.devices = sc->sc_ohci.sc_devices;
sc->sc_ohci.sc_bus.devices_max = OHCI_MAX_DEVICES;
sc->sc_ohci.sc_bus.dma_bits = 32;
/* get all DMA memory */
if (usb_bus_mem_alloc_all(&sc->sc_ohci.sc_bus,
USB_GET_DMA_TAG(dev), &ohci_iterate_hw_softc)) {
return (ENOMEM);
}
sc->sc_ohci.sc_dev = dev;
rid = 0;
sc->sc_ohci.sc_io_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (sc->sc_ohci.sc_io_res == NULL) {
err = ENOMEM;
goto error;
}
sc->sc_ohci.sc_io_tag = rman_get_bustag(sc->sc_ohci.sc_io_res);
sc->sc_ohci.sc_io_hdl = rman_get_bushandle(sc->sc_ohci.sc_io_res);
sc->sc_ohci.sc_io_size = rman_get_size(sc->sc_ohci.sc_io_res);
rid = 0;
sc->sc_ohci.sc_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_ACTIVE);
if (sc->sc_ohci.sc_irq_res == NULL) {
err = ENOMEM;
goto error;
}
sc->sc_ohci.sc_bus.bdev = device_add_child(dev, "usbus", -1);
if (sc->sc_ohci.sc_bus.bdev == NULL) {
err = ENOMEM;
goto error;
}
device_set_ivars(sc->sc_ohci.sc_bus.bdev, &sc->sc_ohci.sc_bus);
err = bus_setup_intr(dev, sc->sc_ohci.sc_irq_res,
INTR_TYPE_BIO | INTR_MPSAFE, NULL,
ar71xx_ohci_intr, sc, &sc->sc_ohci.sc_intr_hdl);
if (err) {
err = ENXIO;
goto error;
}
strlcpy(sc->sc_ohci.sc_vendor, "Atheros", sizeof(sc->sc_ohci.sc_vendor));
bus_space_write_4(sc->sc_ohci.sc_io_tag, sc->sc_ohci.sc_io_hdl, OHCI_CONTROL, 0);
err = ohci_init(&sc->sc_ohci);
if (!err)
err = device_probe_and_attach(sc->sc_ohci.sc_bus.bdev);
if (err)
goto error;
return (0);
error:
if (err) {
ar71xx_ohci_detach(dev);
return (err);
}
return (err);
}
static int
ar71xx_ohci_detach(device_t dev)
{
struct ar71xx_ohci_softc *sc = device_get_softc(dev);
device_t bdev;
if (sc->sc_ohci.sc_bus.bdev) {
bdev = sc->sc_ohci.sc_bus.bdev;
device_detach(bdev);
device_delete_child(dev, bdev);
}
/* during module unload there are lots of children leftover */
device_delete_children(dev);
/*
* Put the controller into reset, then disable clocks and do
* the MI tear down. We have to disable the clocks/hardware
* after we do the rest of the teardown. We also disable the
* clocks in the opposite order we acquire them, but that
* doesn't seem to be absolutely necessary. We free up the
* clocks after we disable them, so the system could, in
* theory, reuse them.
*/
bus_space_write_4(sc->sc_ohci.sc_io_tag, sc->sc_ohci.sc_io_hdl,
OHCI_CONTROL, 0);
if (sc->sc_ohci.sc_intr_hdl) {
bus_teardown_intr(dev, sc->sc_ohci.sc_irq_res, sc->sc_ohci.sc_intr_hdl);
sc->sc_ohci.sc_intr_hdl = NULL;
}
if (sc->sc_ohci.sc_irq_res && sc->sc_ohci.sc_intr_hdl) {
/*
* only call ohci_detach() after ohci_init()
*/
ohci_detach(&sc->sc_ohci);
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->sc_ohci.sc_irq_res);
sc->sc_ohci.sc_irq_res = NULL;
}
if (sc->sc_ohci.sc_io_res) {
bus_release_resource(dev, SYS_RES_MEMORY, 0, sc->sc_ohci.sc_io_res);
sc->sc_ohci.sc_io_res = NULL;
sc->sc_ohci.sc_io_tag = 0;
sc->sc_ohci.sc_io_hdl = 0;
}
usb_bus_mem_free_all(&sc->sc_ohci.sc_bus, &ohci_iterate_hw_softc);
return (0);
}
static device_method_t ohci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ar71xx_ohci_probe),
DEVMETHOD(device_attach, ar71xx_ohci_attach),
DEVMETHOD(device_detach, ar71xx_ohci_detach),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD_END
};
static driver_t ohci_driver = {
.name = "ohci",
.methods = ohci_methods,
.size = sizeof(struct ar71xx_ohci_softc),
};
static devclass_t ohci_devclass;
DRIVER_MODULE(ohci, apb, ohci_driver, ohci_devclass, 0, 0);