freebsd-dev/sys/dev/ata/ata-all.h
Søren Schmidt b9bb98b32b Added driver to support ATAPI floppies ie LS-120 & ZIP drives.
Added "options ATA_STATIC_ID" that wires ATA disks like the old wd driver.

Fixed problems:

	Dont use more sectors/intr than the drive supports.
	Fix announce of > 8.4G disks.
	Dont call ad_interrupt/ad_transfer when no disks config'd.
	Use the right page# for CDR write mode params.
	Fix breakage when no PCI support in kernel.
	Implement DEVFS stuff.

General code clenaup.
1999-03-03 21:10:29 +00:00

203 lines
7.6 KiB
C

/*-
* Copyright (c) 1998,1999 Søren Schmidt
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: ata-all.h,v 1.1 1999/03/01 21:19:18 sos Exp $
*/
/* ATA register defines */
#define ATA_DATA 0x00 /* data register */
#define ATA_ERROR 0x01 /* (R) error register */
#define ATA_PRECOMP 0x01 /* (W) precompensation */
#define ATA_COUNT 0x02 /* sector count */
#define ATA_I_CMD 0x01 /* cmd (1) | data (0) */
#define ATA_I_IN 0x02 /* read (1) | write (0) */
#define ATA_I_RELEASE 0x04 /* released bus (1) */
#define ATA_SECTOR 0x03 /* sector # */
#define ATA_CYL_LSB 0x04 /* cylinder# LSB */
#define ATA_CYL_MSB 0x05 /* cylinder# MSB */
#define ATA_DRIVE 0x06 /* Sector/Drive/Head register */
#define ATA_D_IBM 0xa0 /* 512 byte sectors, ECC */
#define ATA_CMD 0x07 /* command register */
#define ATA_C_ATA_IDENTIFY 0xec /* get ATA params */
#define ATA_C_ATAPI_IDENTIFY 0xa1 /* get ATAPI params*/
#define ATA_C_READ 0x20 /* read command */
#define ATA_C_WRITE 0x30 /* write command */
#define ATA_C_READ_MULTI 0xc4 /* read multi command */
#define ATA_C_WRITE_MULTI 0xc5 /* write multi command */
#define ATA_C_SET_MULTI 0xc6 /* set multi size command */
#define ATA_C_PACKET_CMD 0xa0 /* set multi size command */
#define ATA_STATUS 0x07 /* status register */
#define ATA_S_ERROR 0x01 /* error */
#define ATA_S_INDEX 0x02 /* index */
#define ATA_S_CORR 0x04 /* data corrected */
#define ATA_S_DRQ 0x08 /* data request */
#define ATA_S_DSC 0x10 /* drive Seek Completed */
#define ATA_S_DWF 0x20 /* drive write fault */
#define ATA_S_DRDY 0x40 /* drive ready */
#define ATA_S_BSY 0x80 /* busy */
#define ATA_ALTPORT 0x206 /* alternate Status register */
#define ATA_A_IDS 0x02 /* disable interrupts */
#define ATA_A_RESET 0x04 /* RESET controller */
#define ATA_A_4BIT 0x08 /* 4 head bits */
/* Misc defines */
#define ATA_MASTER 0x00
#define ATA_SLAVE 0x10
#define ATA_IOSIZE 0x08
/* Devices types */
#define ATA_ATA_MASTER 0x01
#define ATA_ATA_SLAVE 0x02
#define ATA_ATAPI_MASTER 0x04
#define ATA_ATAPI_SLAVE 0x08
struct ata_params {
int16_t config; /* general configuration bits */
u_int16_t cylinders; /* number of cylinders */
int16_t reserved2;
u_int16_t heads; /* # heads */
int16_t unfbytespertrk; /* # unformatted bytes/track */
int16_t unfbytes; /* # unformatted bytes/sector */
u_int16_t sectors; /* # sectors/track */
int16_t vendorunique[3];
int8_t serial[20]; /* serial number */
int16_t buffertype; /* buffer type */
#define ATA_BT_SINGLEPORTSECTOR 1 /* 1 port, 1 sector buffer */
#define ATA_BT_DUALPORTMULTI 2 /* 2 port, mult sector buffer */
#define ATA_BT_DUALPORTMULTICACHE 3 /* above plus track cache */
int16_t buffersize; /* buf size, 512-byte units */
int16_t necc; /* ecc bytes appended */
int8_t revision[8]; /* firmware revision */
int8_t model[40]; /* model name */
int8_t nsecperint; /* sectors per interrupt */
int8_t vendorunique1;
int16_t usedmovsd; /* double word read/write? */
int8_t vendorunique2;
int8_t capability; /* various capability bits */
int16_t cap_validate; /* validation for above */
int8_t vendorunique3;
int8_t opiomode; /* PIO modes 0-2 */
int8_t vendorunique4;
int8_t odmamode; /* old DMA modes, not ATA-3 */
int16_t atavalid; /* fields valid */
int16_t currcyls;
int16_t currheads;
int16_t currsectors;
int16_t currsize0;
int16_t currsize1;
int8_t currmultsect;
int8_t multsectvalid;
int lbasize;
int16_t dmasword; /* obsolete in ATA-3 */
int16_t dmamword; /* multiword DMA modes */
int16_t eidepiomodes; /* advanced PIO modes */
int16_t eidedmamin; /* fastest DMA timing */
int16_t eidedmanorm; /* recommended DMA timing */
int16_t eidepioblind; /* fastest possible blind PIO */
int16_t eidepioacked; /* fastest possible IORDY PIO */
int16_t reserved69;
int16_t reserved70;
int16_t reserved71;
int16_t reserved72;
int16_t reserved73;
int16_t reserved74;
int16_t queuelen;
int16_t reserved76;
int16_t reserved77;
int16_t reserved78;
int16_t reserved79;
int16_t versmajor;
int16_t versminor;
int16_t featsupp1;
int16_t featsupp2;
int16_t featsupp3;
int16_t featenab1;
int16_t featenab2;
int16_t featenab3;
int16_t udmamode; /* UltraDMA modes */
int16_t erasetime;
int16_t enherasetime;
int16_t apmlevel;
int16_t reserved92[34];
int16_t rmvcap;
int16_t securelevel;
};
/* Structure describing an ATA device */
struct ata_softc {
u_int32_t unit; /* this instance's number */
u_int32_t ioaddr; /* port addr */
u_int32_t altioaddr; /* alternate port addr */
void *dmacookie; /* handle for DMA services */
int32_t flags; /* controller flags */
#define ATA_F_SLAVE_ONLY 0x0001
int32_t devices; /* what is present */
u_int8_t status; /* last controller status */
u_int8_t error; /* last controller error */
int32_t active; /* active processing request */
#define ATA_IDLE 0x0
#define ATA_ACTIVE_ATA 0x1
#define ATA_ACTIVE_ATAPI 0x2
#define ATA_IGNORE_INTR 0x3
struct buf_queue_head ata_queue; /* head of ATA queue */
struct ata_params *ata_parm[2]; /* ata device params */
TAILQ_HEAD(, atapi_request) atapi_queue; /* head of ATAPI queue */
struct atapi_params *atapi_parm[2]; /* atapi device params */
};
struct ata_request {
struct ad_softc *driver; /* ptr to parent device */
/*bla request bla*/
u_int32_t flags; /* drive flags */
#define A_READ 0x0001
u_int32_t bytecount; /* bytes to transfer */
u_int32_t donecount; /* bytes transferred */
u_int32_t currentsize; /* size of current transfer */
struct buf *bp; /* associated buf ptr */
TAILQ_ENTRY(ata_request) chain; /* list management */
};
#define MAXATA 8
extern struct ata_softc *atadevices[];
/* public prototypes */
void ata_start(struct ata_softc *);
int32_t ata_wait(struct ata_softc *, u_int8_t);
int32_t atapi_wait(struct ata_softc *, u_int8_t);
void bpack(int8_t *, int8_t *, int32_t);