freebsd-dev/sys/dev/usb/controller/dwc_otg.h
Hans Petter Selasky e71628651b Fix LOW and FULL speed USB INTERRUPT endpoint support for the
DWC OTG driver. Fix a hang issue when using LOW and FULL speed
BULK traffic. Make sure we don't ask for data in the last
microframe. This allows using devices like USB mice and USB
keyboards connected to the RPI-B.

Suggested by:	gonzo @
2012-11-09 16:28:58 +00:00

202 lines
5.7 KiB
C

/* $FreeBSD$ */
/*-
* Copyright (c) 2012 Hans Petter Selasky. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef _DWC_OTG_H_
#define _DWC_OTG_H_
#define DWC_OTG_MAX_DEVICES MIN(USB_MAX_DEVICES, 32)
#define DWC_OTG_FRAME_MASK 0x7FF
#define DWC_OTG_MAX_TXP 4
#define DWC_OTG_MAX_TXN (0x200 * DWC_OTG_MAX_TXP)
#define DWC_OTG_MAX_CHANNELS 16
#define DWC_OTG_MAX_ENDPOINTS 16
#define DWC_OTG_HOST_TIMER_RATE 10 /* ms */
#define DWC_OTG_READ_4(sc, reg) \
bus_space_read_4((sc)->sc_io_tag, (sc)->sc_io_hdl, reg)
#define DWC_OTG_WRITE_4(sc, reg, data) \
bus_space_write_4((sc)->sc_io_tag, (sc)->sc_io_hdl, reg, data)
struct dwc_otg_td;
struct dwc_otg_softc;
typedef uint8_t (dwc_otg_cmd_t)(struct dwc_otg_td *td);
struct dwc_otg_td {
struct dwc_otg_td *obj_next;
dwc_otg_cmd_t *func;
struct usb_page_cache *pc;
uint32_t tx_bytes;
uint32_t offset;
uint32_t remainder;
uint32_t hcchar; /* HOST CFG */
uint32_t hcsplt; /* HOST CFG */
uint16_t max_packet_size; /* packet_size */
uint16_t npkt;
uint8_t errcnt;
uint8_t tmr_res;
uint8_t tmr_val;
uint8_t curr_frame;
uint8_t ep_no;
uint8_t channel;
uint8_t state;
#define DWC_CHAN_ST_START 0
#define DWC_CHAN_ST_WAIT_ANE 1
#define DWC_CHAN_ST_WAIT_S_ANE 2
#define DWC_CHAN_ST_WAIT_C_ANE 3
#define DWC_CHAN_ST_RX_PKT 4
#define DWC_CHAN_ST_RX_SPKT 5
#define DWC_CHAN_ST_RX_SPKT_SYNC 6
#define DWC_CHAN_ST_TX_PKT 4
#define DWC_CHAN_ST_TX_CPKT 5
#define DWC_CHAN_ST_TX_PKT_SYNC 6
uint8_t error:1;
uint8_t error_any:1;
uint8_t error_stall:1;
uint8_t alt_next:1;
uint8_t short_pkt:1;
uint8_t did_stall:1;
uint8_t toggle:1;
uint8_t set_toggle:1;
uint8_t got_short:1;
uint8_t did_nak:1;
};
struct dwc_otg_std_temp {
dwc_otg_cmd_t *func;
struct usb_page_cache *pc;
struct dwc_otg_td *td;
struct dwc_otg_td *td_next;
uint32_t len;
uint32_t offset;
uint16_t max_frame_size;
uint8_t short_pkt;
/*
* short_pkt = 0: transfer should be short terminated
* short_pkt = 1: transfer should not be short terminated
*/
uint8_t setup_alt_next;
uint8_t did_stall;
uint8_t bulk_or_control;
};
struct dwc_otg_config_desc {
struct usb_config_descriptor confd;
struct usb_interface_descriptor ifcd;
struct usb_endpoint_descriptor endpd;
} __packed;
union dwc_otg_hub_temp {
uWord wValue;
struct usb_port_status ps;
};
struct dwc_otg_flags {
uint8_t change_connect:1;
uint8_t change_suspend:1;
uint8_t change_reset:1;
uint8_t change_enabled:1;
uint8_t change_over_current:1;
uint8_t status_suspend:1; /* set if suspended */
uint8_t status_vbus:1; /* set if present */
uint8_t status_bus_reset:1; /* set if reset complete */
uint8_t status_high_speed:1; /* set if High Speed is selected */
uint8_t status_low_speed:1; /* set if Low Speed is selected */
uint8_t status_device_mode:1; /* set if device mode */
uint8_t self_powered:1;
uint8_t clocks_off:1;
uint8_t port_powered:1;
uint8_t port_enabled:1;
uint8_t port_over_current:1;
uint8_t d_pulled_up:1;
};
struct dwc_otg_profile {
struct usb_hw_ep_profile usb;
uint16_t max_buffer;
};
struct dwc_otg_chan_state {
uint32_t hcint;
uint8_t wait_sof;
uint8_t allocated;
uint8_t suspended;
};
struct dwc_otg_softc {
struct usb_bus sc_bus;
union dwc_otg_hub_temp sc_hub_temp;
struct dwc_otg_profile sc_hw_ep_profile[DWC_OTG_MAX_ENDPOINTS];
struct usb_callout sc_timer;
struct usb_device *sc_devices[DWC_OTG_MAX_DEVICES];
struct resource *sc_io_res;
struct resource *sc_irq_res;
void *sc_intr_hdl;
bus_size_t sc_io_size;
bus_space_tag_t sc_io_tag;
bus_space_handle_t sc_io_hdl;
uint32_t sc_rx_bounce_buffer[1024 / 4];
uint32_t sc_tx_bounce_buffer[(512 * DWC_OTG_MAX_TXP) / 4];
uint32_t sc_fifo_size;
uint32_t sc_irq_mask;
uint32_t sc_last_rx_status;
uint32_t sc_out_ctl[DWC_OTG_MAX_ENDPOINTS];
uint32_t sc_in_ctl[DWC_OTG_MAX_ENDPOINTS];
struct dwc_otg_chan_state sc_chan_state[DWC_OTG_MAX_CHANNELS];
uint32_t sc_tmr_val;
uint32_t sc_hprt_val;
uint16_t sc_active_rx_ep;
uint8_t sc_timer_active;
uint8_t sc_dev_ep_max;
uint8_t sc_dev_in_ep_max;
uint8_t sc_host_ch_max;
uint8_t sc_rt_addr; /* root HUB address */
uint8_t sc_conf; /* root HUB config */
uint8_t sc_mode; /* mode of operation */
#define DWC_MODE_OTG 0 /* both modes */
#define DWC_MODE_DEVICE 1 /* device only */
#define DWC_MODE_HOST 2 /* host only */
uint8_t sc_hub_idata[1];
struct dwc_otg_flags sc_flags;
};
/* prototypes */
void dwc_otg_interrupt(struct dwc_otg_softc *);
int dwc_otg_init(struct dwc_otg_softc *);
void dwc_otg_uninit(struct dwc_otg_softc *);
#endif /* _DWC_OTG_H_ */