# $Id: README,v 1.1 1997/03/11 07:27:15 sjg Exp $
This directory contains some macro's derrived from the NetBSD bsd.*.mk
macros. They have the same names but without the bsd., separate macro
files are needed to ensure we can make them do what we want for
builing things outside of /usr/src. Nearly all the comments below
apply.
# $NetBSD: bsd.README,v 1.18 1997/01/13 00:54:23 mark Exp $
# @(#)bsd.README 5.1 (Berkeley) 5/11/90
This is the README file for the new make "include" files for the BSD
source tree. The files are installed in /usr/share/mk, and are, by
convention, named with the suffix ".mk".
Note, this file is not intended to replace reading through the .mk
files for anything tricky.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
RANDOM THINGS WORTH KNOWING:
The files are simply C-style #include files, and pretty much behave like
you'd expect. The syntax is slightly different in that a single '.' is
used instead of the hash mark, i.e. ".include <bsd.prog.mk>".
One difference that will save you lots of debugging time is that inclusion
of the file is normally done at the *end* of the Makefile. The reason for
this is because .mk files often modify variables and behavior based on the
values of variables set in the Makefile. To make this work, remember that
the FIRST target found is the target that is used, i.e. if the Makefile has:
a:
echo a
a:
echo a number two
the command "make a" will echo "a". To make things confusing, the SECOND
variable assignment is the overriding one, i.e. if the Makefile has:
a= foo
a= bar
b:
echo ${a}
the command "make b" will echo "bar". This is for compatibility with the
way the V7 make behaved.
It's fairly difficult to make the BSD .mk files work when you're building
multiple programs in a single directory. It's a lot easier split up the
programs than to deal with the problem. Most of the agony comes from making
the "obj" directory stuff work right, not because we switch to a new version
of make. So, don't get mad at us, figure out a better way to handle multiple
architectures so we can quit using the symbolic link stuff. (Imake doesn't
count.)
The file .depend in the source directory is expected to contain dependencies
for the source files. This file is read automatically by make after reading
the Makefile.
The variable DESTDIR works as before. It's not set anywhere but will change
the tree where the file gets installed.
The profiled libraries are no longer built in a different directory than
the regular libraries. A new suffix, ".po", is used to denote a profiled
object.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
The include file <sys.mk> has the default rules for all makes, in the BSD
environment or otherwise. You probably don't want to touch this file.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
The include file <bsd.man.mk> handles installing manual pages and their
links.
It has a single target:
maninstall:
Install the manual pages and their links.
It sets/uses the following variables:
MANDIR Base path for manual installation.
MANGRP Manual group.
MANOWN Manual owner.
MANMODE Manual mode.
MANSUBDIR Subdirectory under the manual page section, i.e. "/vax"
or "/tahoe" for machine specific manual pages.
MAN The manual pages to be installed (use a .1 - .9 suffix).
MLINKS List of manual page links (using a .1 - .9 suffix). The
linked-to file must come first, the linked file second,
and there may be multiple pairs. The files are soft-linked.
The include file <bsd.man.mk> includes a file named "../Makefile.inc" if
it exists.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
The include file <bsd.own.mk> contains source tree configuration parameters,
such as the owners, groups, etc. for both manual pages and binaries, and
a few global "feature configuration" parameters.
It has no targets.
To get system-specific configuration parameters, bsd.own.mk will try to
include the file specified by the "MAKECONF" variable. If MAKECONF is not
set, or no such file exists, the system make configuration file, /etc/mk.conf
is included. These files may define any of the variables described below.
bsd.own.mk sets the following variables, if they are not already defined
(defaults are in brackets):
BSDSRCDIR The real path to the system sources, so that 'make obj'
will work correctly. [/usr/src]
BSDOBJDIR The real path to the system 'obj' tree, so that 'make obj'
will work correctly. [/usr/obj]
BINGRP Binary group. [bin]
BINOWN Binary owner. [bin]
BINMODE Binary mode. [555]
NONBINMODE Mode for non-executable files. [444]
MANDIR Base path for manual installation. [/usr/share/man/cat]
MANGRP Manual group. [bin]
MANOWN Manual owner. [bin]
MANMODE Manual mode. [${NONBINMODE}]
LIBDIR Base path for library installation. [/usr/lib]
LINTLIBDIR Base path for lint(1) library installation. [/usr/libdata/lint]
LIBGRP Library group. [${BINGRP}]
LIBOWN Library owner. [${BINOWN}]
LIBMODE Library mode. [${NONBINMODE}]
DOCDIR Base path for system documentation (e.g. PSD, USD, etc.)
installation. [/usr/share/doc]
DOCGRP Documentation group. [bin]
DOCOWN Documentation owner. [bin]
DOCMODE Documentation mode. [${NONBINMODE}]
NLSDIR Base path for National Language Support files installation.
[/usr/share/nls]
NLSGRP National Language Support files group. [bin]
NLSOWN National Language Support files owner. [bin]
NLSMODE National Language Support files mode. [${NONBINMODE}]
STRIP The flag passed to the install program to cause the binary
to be stripped. This is to be used when building your
own install script so that the entire system can be made
stripped/not-stripped using a single knob. [-s]
COPY The flag passed to the install program to cause the binary
to be copied rather than moved. This is to be used when
building our own install script so that the entire system
can either be installed with copies, or with moves using
a single knob. [-c]
Additionally, the following variables may be set by bsd.own.mk or in a
make configuration file to modify the behaviour of the system build
process (default values are in brackets along with comments, if set by
bsd.own.mk):
EXPORTABLE_SYSTEM
Do not build /usr/src/domestic, even if it is present.
SKEY Compile in support for S/key authentication. [yes, set
unconditionally]
KERBEROS Compile in support for Kerberos 4 authentication.
KERBEROS5 Compile in support for Kerberos 5 authentication.
MANZ Compress manual pages at installation time.
SYS_INCLUDE Copy or symlink kernel include files into /usr/include.
Possible values are "symlinks" or "copies" (which is
the same as the variable being unset).
NOPROFILE Do not build profiled versions of system libraries
NOPIC Do not build PIC versions of system libraries, and
do not build shared libraries. [set if ${MACHINE_ARCH}
is "mips", "vax", "alpha" or "arm32", unset otherwise.]
NOLINT Do not build lint libraries. [set, set unconditionally]
bsd.own.mk is generally useful when building your own Makefiles so that
they use the same default owners etc. as the rest of the tree.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
The include file <bsd.prog.mk> handles building programs from one or
more source files, along with their manual pages. It has a limited number
of suffixes, consistent with the current needs of the BSD tree.
It has eight targets:
all:
build the program and its manual page
clean:
remove the program, any object files and the files a.out,
Errs, errs, mklog, and core.
cleandir:
remove all of the files removed by the target clean, as
well as .depend, tags, and any manual pages.
depend:
make the dependencies for the source files, and store
them in the file .depend.
includes:
install any header files.
install:
install the program and its manual pages; if the Makefile
does not itself define the target install, the targets
beforeinstall and afterinstall may also be used to cause
actions immediately before and after the install target
is executed.
lint:
run lint on the source files
tags:
create a tags file for the source files.
It sets/uses the following variables:
BINGRP Binary group.
BINOWN Binary owner.
BINMODE Binary mode.
CLEANFILES Additional files to remove for the clean and cleandir targets.
COPTS Additional flags to the compiler when creating C objects.
HIDEGAME If HIDEGAME is defined, the binary is installed in
/usr/games/hide, and a symbolic link is created to
/usr/games/dm.
LDADD Additional loader objects. Usually used for libraries.
For example, to load with the compatibility and utility
libraries, use:
LDADD+=-lutil -lcompat
LDFLAGS Additional loader flags.
LINKS The list of binary links; should be full pathnames, the
linked-to file coming first, followed by the linked
file. The files are hard-linked. For example, to link
/bin/test and /bin/[, use:
LINKS= ${DESTDIR}/bin/test ${DESTDIR}/bin/[
MAN Manual pages (should end in .1 - .9). If no MAN variable is
defined, "MAN=${PROG}.1" is assumed.
PROG The name of the program to build. If not supplied, nothing
is built.
SRCS List of source files to build the program. If PROG is not
defined, it's assumed to be ${PROG}.c.
DPADD Additional dependencies for the program. Usually used for
libraries. For example, to depend on the compatibility and
utility libraries use:
DPADD+=${LIBCOMPAT} ${LIBUTIL}
The following libraries are predefined for DPADD:
LIBC /lib/libc.a
LIBCOMPAT /usr/lib/libcompat.a
LIBCRYPT /usr/lib/libcrypt.a
LIBCURSES /usr/lib/libcurses.a
LIBDBM /usr/lib/libdbm.a
LIBDES /usr/lib/libdes.a
LIBL /usr/lib/libl.a
LIBKDB /usr/lib/libkdb.a
LIBKRB /usr/lib/libkrb.a
LIBKVM /usr/lib/libkvm.a
LIBM /usr/lib/libm.a
LIBMP /usr/lib/libmp.a
LIBPC /usr/lib/libpc.a
LIBPLOT /usr/lib/libplot.a
LIBRPC /usr/lib/sunrpc.a
LIBTERM /usr/lib/libterm.a
LIBUTIL /usr/lib/libutil.a
SHAREDSTRINGS If defined, a new .c.o rule is used that results in shared
strings, using xstr(1). Note that this will not work with
parallel makes.
STRIP The flag passed to the install program to cause the binary
to be stripped.
SUBDIR A list of subdirectories that should be built as well.
Each of the targets will execute the same target in the
subdirectories.
The include file <bsd.prog.mk> includes the file named "../Makefile.inc"
if it exists, as well as the include file <bsd.man.mk>.
Some simple examples:
To build foo from foo.c with a manual page foo.1, use:
PROG= foo
.include <bsd.prog.mk>
To build foo from foo.c with a manual page foo.2, add the line:
MAN= foo.2
If foo does not have a manual page at all, add the line:
NOMAN= noman
If foo has multiple source files, add the line:
SRCS= a.c b.c c.c d.c
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
The include file <bsd.subdir.mk> contains the default targets for building
subdirectories. It has the same eight targets as <bsd.prog.mk>: all,
clean, cleandir, depend, includes, install, lint, and tags. For all of
the directories listed in the variable SUBDIRS, the specified directory
will be visited and the target made. There is also a default target which
allows the command "make subdir" where subdir is any directory listed in
the variable SUBDIRS.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
The include file <bsd.sys.mk> is used by <bsd.prog.mk> and
<bsd.lib.mk>. It contains overrides that are used when building
the NetBSD source tree. For instance, if "PARALLEL" is defined by
the program/library Makefile, it includes a set of rules for lex and
yacc that allow multiple lex and yacc targets to be built in parallel.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
The include file <bsd.lib.mk> has support for building libraries. It has
the same eight targets as <bsd.prog.mk>: all, clean, cleandir, depend,
includes, install, lint, and tags. It has a limited number of suffixes,
consistent with the current needs of the BSD tree.
It sets/uses the following variables:
LIB The name of the library to build.
LIBDIR Target directory for libraries.
LINTLIBDIR Target directory for lint libraries.
LIBGRP Library group.
LIBOWN Library owner.
LIBMODE Library mode.
LDADD Additional loader objects.
MAN The manual pages to be installed (use a .1 - .9 suffix).
SRCS List of source files to build the library. Suffix types
.s, .c, and .f are supported. Note, .s files are preferred
to .c files of the same name. (This is not the default for
versions of make.)
The include file <bsd.lib.mk> includes the file named "../Makefile.inc"
if it exists, as well as the include file <bsd.man.mk>.
It has rules for building profiled objects; profiled libraries are
built by default.
Libraries are ranlib'd when made.