freebsd-dev/sys/dev/mlx5/mlx5_en/mlx5_en_ethtool.c
Hans Petter Selasky bb3616ab20 Add support for disabling and enabling RX and TX DMA rings in mlx5en(4).
This is useful for supporting setups similar to Netmap.

Sponsored by:	Mellanox Technologies
MFC after:	1 week
2017-11-10 14:10:41 +00:00

795 lines
24 KiB
C

/*-
* Copyright (c) 2015 Mellanox Technologies. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS `AS IS' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include "en.h"
#include <net/sff8472.h>
void
mlx5e_create_stats(struct sysctl_ctx_list *ctx,
struct sysctl_oid_list *parent, const char *buffer,
const char **desc, unsigned num, u64 * arg)
{
struct sysctl_oid *node;
unsigned x;
sysctl_ctx_init(ctx);
node = SYSCTL_ADD_NODE(ctx, parent, OID_AUTO,
buffer, CTLFLAG_RD, NULL, "Statistics");
if (node == NULL)
return;
for (x = 0; x != num; x++) {
SYSCTL_ADD_UQUAD(ctx, SYSCTL_CHILDREN(node), OID_AUTO,
desc[2 * x], CTLFLAG_RD, arg + x, desc[2 * x + 1]);
}
}
static void
mlx5e_ethtool_sync_tx_completion_fact(struct mlx5e_priv *priv)
{
/*
* Limit the maximum distance between completion events to
* half of the currently set TX queue size.
*
* The maximum number of queue entries a single IP packet can
* consume is given by MLX5_SEND_WQE_MAX_WQEBBS.
*
* The worst case max value is then given as below:
*/
uint64_t max = priv->params_ethtool.tx_queue_size /
(2 * MLX5_SEND_WQE_MAX_WQEBBS);
/*
* Update the maximum completion factor value in case the
* tx_queue_size field changed. Ensure we don't overflow
* 16-bits.
*/
if (max < 1)
max = 1;
else if (max > 65535)
max = 65535;
priv->params_ethtool.tx_completion_fact_max = max;
/*
* Verify that the current TX completion factor is within the
* given limits:
*/
if (priv->params_ethtool.tx_completion_fact < 1)
priv->params_ethtool.tx_completion_fact = 1;
else if (priv->params_ethtool.tx_completion_fact > max)
priv->params_ethtool.tx_completion_fact = max;
}
#define MLX5_PARAM_OFFSET(n) \
__offsetof(struct mlx5e_priv, params_ethtool.n)
static int
mlx5e_ethtool_handler(SYSCTL_HANDLER_ARGS)
{
struct mlx5e_priv *priv = arg1;
uint64_t value;
int mode_modify;
int was_opened;
int error;
PRIV_LOCK(priv);
value = priv->params_ethtool.arg[arg2];
if (req != NULL) {
error = sysctl_handle_64(oidp, &value, 0, req);
if (error || req->newptr == NULL ||
value == priv->params_ethtool.arg[arg2])
goto done;
/* assign new value */
priv->params_ethtool.arg[arg2] = value;
} else {
error = 0;
}
/* check if device is gone */
if (priv->gone) {
error = ENXIO;
goto done;
}
was_opened = test_bit(MLX5E_STATE_OPENED, &priv->state);
mode_modify = MLX5_CAP_GEN(priv->mdev, cq_period_mode_modify);
switch (MLX5_PARAM_OFFSET(arg[arg2])) {
case MLX5_PARAM_OFFSET(rx_coalesce_usecs):
/* import RX coal time */
if (priv->params_ethtool.rx_coalesce_usecs < 1)
priv->params_ethtool.rx_coalesce_usecs = 0;
else if (priv->params_ethtool.rx_coalesce_usecs >
MLX5E_FLD_MAX(cqc, cq_period)) {
priv->params_ethtool.rx_coalesce_usecs =
MLX5E_FLD_MAX(cqc, cq_period);
}
priv->params.rx_cq_moderation_usec =
priv->params_ethtool.rx_coalesce_usecs;
/* check to avoid down and up the network interface */
if (was_opened)
error = mlx5e_refresh_channel_params(priv);
break;
case MLX5_PARAM_OFFSET(rx_coalesce_pkts):
/* import RX coal pkts */
if (priv->params_ethtool.rx_coalesce_pkts < 1)
priv->params_ethtool.rx_coalesce_pkts = 0;
else if (priv->params_ethtool.rx_coalesce_pkts >
MLX5E_FLD_MAX(cqc, cq_max_count)) {
priv->params_ethtool.rx_coalesce_pkts =
MLX5E_FLD_MAX(cqc, cq_max_count);
}
priv->params.rx_cq_moderation_pkts =
priv->params_ethtool.rx_coalesce_pkts;
/* check to avoid down and up the network interface */
if (was_opened)
error = mlx5e_refresh_channel_params(priv);
break;
case MLX5_PARAM_OFFSET(tx_coalesce_usecs):
/* import TX coal time */
if (priv->params_ethtool.tx_coalesce_usecs < 1)
priv->params_ethtool.tx_coalesce_usecs = 0;
else if (priv->params_ethtool.tx_coalesce_usecs >
MLX5E_FLD_MAX(cqc, cq_period)) {
priv->params_ethtool.tx_coalesce_usecs =
MLX5E_FLD_MAX(cqc, cq_period);
}
priv->params.tx_cq_moderation_usec =
priv->params_ethtool.tx_coalesce_usecs;
/* check to avoid down and up the network interface */
if (was_opened)
error = mlx5e_refresh_channel_params(priv);
break;
case MLX5_PARAM_OFFSET(tx_coalesce_pkts):
/* import TX coal pkts */
if (priv->params_ethtool.tx_coalesce_pkts < 1)
priv->params_ethtool.tx_coalesce_pkts = 0;
else if (priv->params_ethtool.tx_coalesce_pkts >
MLX5E_FLD_MAX(cqc, cq_max_count)) {
priv->params_ethtool.tx_coalesce_pkts =
MLX5E_FLD_MAX(cqc, cq_max_count);
}
priv->params.tx_cq_moderation_pkts =
priv->params_ethtool.tx_coalesce_pkts;
/* check to avoid down and up the network interface */
if (was_opened)
error = mlx5e_refresh_channel_params(priv);
break;
case MLX5_PARAM_OFFSET(tx_queue_size):
/* network interface must be down */
if (was_opened)
mlx5e_close_locked(priv->ifp);
/* import TX queue size */
if (priv->params_ethtool.tx_queue_size <
(1 << MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE)) {
priv->params_ethtool.tx_queue_size =
(1 << MLX5E_PARAMS_MINIMUM_LOG_SQ_SIZE);
} else if (priv->params_ethtool.tx_queue_size >
priv->params_ethtool.tx_queue_size_max) {
priv->params_ethtool.tx_queue_size =
priv->params_ethtool.tx_queue_size_max;
}
/* store actual TX queue size */
priv->params.log_sq_size =
order_base_2(priv->params_ethtool.tx_queue_size);
priv->params_ethtool.tx_queue_size =
1 << priv->params.log_sq_size;
/* verify TX completion factor */
mlx5e_ethtool_sync_tx_completion_fact(priv);
/* restart network interface, if any */
if (was_opened)
mlx5e_open_locked(priv->ifp);
break;
case MLX5_PARAM_OFFSET(rx_queue_size):
/* network interface must be down */
if (was_opened)
mlx5e_close_locked(priv->ifp);
/* import RX queue size */
if (priv->params_ethtool.rx_queue_size <
(1 << MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE)) {
priv->params_ethtool.rx_queue_size =
(1 << MLX5E_PARAMS_MINIMUM_LOG_RQ_SIZE);
} else if (priv->params_ethtool.rx_queue_size >
priv->params_ethtool.rx_queue_size_max) {
priv->params_ethtool.rx_queue_size =
priv->params_ethtool.rx_queue_size_max;
}
/* store actual RX queue size */
priv->params.log_rq_size =
order_base_2(priv->params_ethtool.rx_queue_size);
priv->params_ethtool.rx_queue_size =
1 << priv->params.log_rq_size;
/* update least number of RX WQEs */
priv->params.min_rx_wqes = min(
priv->params_ethtool.rx_queue_size - 1,
MLX5E_PARAMS_DEFAULT_MIN_RX_WQES);
/* restart network interface, if any */
if (was_opened)
mlx5e_open_locked(priv->ifp);
break;
case MLX5_PARAM_OFFSET(channels):
/* network interface must be down */
if (was_opened)
mlx5e_close_locked(priv->ifp);
/* import number of channels */
if (priv->params_ethtool.channels < 1)
priv->params_ethtool.channels = 1;
else if (priv->params_ethtool.channels >
(u64) priv->mdev->priv.eq_table.num_comp_vectors) {
priv->params_ethtool.channels =
(u64) priv->mdev->priv.eq_table.num_comp_vectors;
}
priv->params.num_channels = priv->params_ethtool.channels;
/* restart network interface, if any */
if (was_opened)
mlx5e_open_locked(priv->ifp);
break;
case MLX5_PARAM_OFFSET(rx_coalesce_mode):
/* network interface must be down */
if (was_opened != 0 && mode_modify == 0)
mlx5e_close_locked(priv->ifp);
/* import RX coalesce mode */
if (priv->params_ethtool.rx_coalesce_mode != 0)
priv->params_ethtool.rx_coalesce_mode = 1;
priv->params.rx_cq_moderation_mode =
priv->params_ethtool.rx_coalesce_mode;
/* restart network interface, if any */
if (was_opened != 0) {
if (mode_modify == 0)
mlx5e_open_locked(priv->ifp);
else
error = mlx5e_refresh_channel_params(priv);
}
break;
case MLX5_PARAM_OFFSET(tx_coalesce_mode):
/* network interface must be down */
if (was_opened != 0 && mode_modify == 0)
mlx5e_close_locked(priv->ifp);
/* import TX coalesce mode */
if (priv->params_ethtool.tx_coalesce_mode != 0)
priv->params_ethtool.tx_coalesce_mode = 1;
priv->params.tx_cq_moderation_mode =
priv->params_ethtool.tx_coalesce_mode;
/* restart network interface, if any */
if (was_opened != 0) {
if (mode_modify == 0)
mlx5e_open_locked(priv->ifp);
else
error = mlx5e_refresh_channel_params(priv);
}
break;
case MLX5_PARAM_OFFSET(hw_lro):
/* network interface must be down */
if (was_opened)
mlx5e_close_locked(priv->ifp);
/* import HW LRO mode */
if (priv->params_ethtool.hw_lro != 0) {
if ((priv->ifp->if_capenable & IFCAP_LRO) &&
MLX5_CAP_ETH(priv->mdev, lro_cap)) {
priv->params.hw_lro_en = 1;
priv->params_ethtool.hw_lro = 1;
} else {
priv->params.hw_lro_en = 0;
priv->params_ethtool.hw_lro = 0;
error = EINVAL;
if_printf(priv->ifp, "Can't enable HW LRO: "
"The HW or SW LRO feature is disabled\n");
}
} else {
priv->params.hw_lro_en = 0;
}
/* restart network interface, if any */
if (was_opened)
mlx5e_open_locked(priv->ifp);
break;
case MLX5_PARAM_OFFSET(cqe_zipping):
/* network interface must be down */
if (was_opened)
mlx5e_close_locked(priv->ifp);
/* import CQE zipping mode */
if (priv->params_ethtool.cqe_zipping &&
MLX5_CAP_GEN(priv->mdev, cqe_compression)) {
priv->params.cqe_zipping_en = true;
priv->params_ethtool.cqe_zipping = 1;
} else {
priv->params.cqe_zipping_en = false;
priv->params_ethtool.cqe_zipping = 0;
}
/* restart network interface, if any */
if (was_opened)
mlx5e_open_locked(priv->ifp);
break;
case MLX5_PARAM_OFFSET(tx_bufring_disable):
/* rangecheck input value */
priv->params_ethtool.tx_bufring_disable =
priv->params_ethtool.tx_bufring_disable ? 1 : 0;
/* reconfigure the sendqueues, if any */
if (was_opened) {
mlx5e_close_locked(priv->ifp);
mlx5e_open_locked(priv->ifp);
}
break;
case MLX5_PARAM_OFFSET(tx_completion_fact):
/* network interface must be down */
if (was_opened)
mlx5e_close_locked(priv->ifp);
/* verify parameter */
mlx5e_ethtool_sync_tx_completion_fact(priv);
/* restart network interface, if any */
if (was_opened)
mlx5e_open_locked(priv->ifp);
break;
case MLX5_PARAM_OFFSET(modify_tx_dma):
/* check if network interface is opened */
if (was_opened) {
priv->params_ethtool.modify_tx_dma =
priv->params_ethtool.modify_tx_dma ? 1 : 0;
/* modify tx according to value */
mlx5e_modify_tx_dma(priv, value != 0);
} else {
/* if closed force enable tx */
priv->params_ethtool.modify_tx_dma = 0;
}
break;
case MLX5_PARAM_OFFSET(modify_rx_dma):
/* check if network interface is opened */
if (was_opened) {
priv->params_ethtool.modify_rx_dma =
priv->params_ethtool.modify_rx_dma ? 1 : 0;
/* modify rx according to value */
mlx5e_modify_rx_dma(priv, value != 0);
} else {
/* if closed force enable rx */
priv->params_ethtool.modify_rx_dma = 0;
}
break;
case MLX5_PARAM_OFFSET(diag_pci_enable):
priv->params_ethtool.diag_pci_enable =
priv->params_ethtool.diag_pci_enable ? 1 : 0;
error = -mlx5_core_set_diagnostics_full(priv->mdev,
priv->params_ethtool.diag_pci_enable,
priv->params_ethtool.diag_general_enable);
break;
case MLX5_PARAM_OFFSET(diag_general_enable):
priv->params_ethtool.diag_general_enable =
priv->params_ethtool.diag_general_enable ? 1 : 0;
error = -mlx5_core_set_diagnostics_full(priv->mdev,
priv->params_ethtool.diag_pci_enable,
priv->params_ethtool.diag_general_enable);
break;
default:
break;
}
done:
PRIV_UNLOCK(priv);
return (error);
}
/*
* Read the first three bytes of the eeprom in order to get the needed info
* for the whole reading.
* Byte 0 - Identifier byte
* Byte 1 - Revision byte
* Byte 2 - Status byte
*/
static int
mlx5e_get_eeprom_info(struct mlx5e_priv *priv, struct mlx5e_eeprom *eeprom)
{
struct mlx5_core_dev *dev = priv->mdev;
u32 data = 0;
int size_read = 0;
int ret;
ret = mlx5_query_module_num(dev, &eeprom->module_num);
if (ret) {
if_printf(priv->ifp, "%s:%d: Failed query module error=%d\n",
__func__, __LINE__, ret);
return (ret);
}
/* Read the first three bytes to get Identifier, Revision and Status */
ret = mlx5_query_eeprom(dev, eeprom->i2c_addr, eeprom->page_num,
eeprom->device_addr, MLX5E_EEPROM_INFO_BYTES, eeprom->module_num, &data,
&size_read);
if (ret) {
if_printf(priv->ifp, "%s:%d: Failed query eeprom module error=0x%x\n",
__func__, __LINE__, ret);
return (ret);
}
switch (data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK) {
case SFF_8024_ID_QSFP:
eeprom->type = MLX5E_ETH_MODULE_SFF_8436;
eeprom->len = MLX5E_ETH_MODULE_SFF_8436_LEN;
break;
case SFF_8024_ID_QSFPPLUS:
case SFF_8024_ID_QSFP28:
if ((data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK) == SFF_8024_ID_QSFP28 ||
((data & MLX5_EEPROM_REVISION_ID_BYTE_MASK) >> 8) >= 0x3) {
eeprom->type = MLX5E_ETH_MODULE_SFF_8636;
eeprom->len = MLX5E_ETH_MODULE_SFF_8636_LEN;
} else {
eeprom->type = MLX5E_ETH_MODULE_SFF_8436;
eeprom->len = MLX5E_ETH_MODULE_SFF_8436_LEN;
}
if ((data & MLX5_EEPROM_PAGE_3_VALID_BIT_MASK) == 0)
eeprom->page_valid = 1;
break;
case SFF_8024_ID_SFP:
eeprom->type = MLX5E_ETH_MODULE_SFF_8472;
eeprom->len = MLX5E_ETH_MODULE_SFF_8472_LEN;
break;
default:
if_printf(priv->ifp, "%s:%d: Not recognized cable type = 0x%x(%s)\n",
__func__, __LINE__, data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK,
sff_8024_id[data & MLX5_EEPROM_IDENTIFIER_BYTE_MASK]);
return (EINVAL);
}
return (0);
}
/* Read both low and high pages of the eeprom */
static int
mlx5e_get_eeprom(struct mlx5e_priv *priv, struct mlx5e_eeprom *ee)
{
struct mlx5_core_dev *dev = priv->mdev;
int size_read = 0;
int ret;
if (ee->len == 0)
return (EINVAL);
/* Read low page of the eeprom */
while (ee->device_addr < ee->len) {
ret = mlx5_query_eeprom(dev, ee->i2c_addr, ee->page_num, ee->device_addr,
ee->len - ee->device_addr, ee->module_num,
ee->data + (ee->device_addr / 4), &size_read);
if (ret) {
if_printf(priv->ifp, "%s:%d: Failed reading eeprom, "
"error = 0x%02x\n", __func__, __LINE__, ret);
return (ret);
}
ee->device_addr += size_read;
}
/* Read high page of the eeprom */
if (ee->page_valid) {
ee->device_addr = MLX5E_EEPROM_HIGH_PAGE_OFFSET;
ee->page_num = MLX5E_EEPROM_HIGH_PAGE;
size_read = 0;
while (ee->device_addr < MLX5E_EEPROM_PAGE_LENGTH) {
ret = mlx5_query_eeprom(dev, ee->i2c_addr, ee->page_num,
ee->device_addr, MLX5E_EEPROM_PAGE_LENGTH - ee->device_addr,
ee->module_num, ee->data + (ee->len / 4) +
((ee->device_addr - MLX5E_EEPROM_HIGH_PAGE_OFFSET) / 4),
&size_read);
if (ret) {
if_printf(priv->ifp, "%s:%d: Failed reading eeprom, "
"error = 0x%02x\n", __func__, __LINE__, ret);
return (ret);
}
ee->device_addr += size_read;
}
}
return (0);
}
static void
mlx5e_print_eeprom(struct mlx5e_eeprom *eeprom)
{
int row;
int index_in_row;
int byte_to_write = 0;
int line_length = 16;
printf("\nOffset\t\tValues\n");
printf("------\t\t------");
while (byte_to_write < eeprom->len) {
printf("\n0x%04X\t\t", byte_to_write);
for (index_in_row = 0; index_in_row < line_length; index_in_row++) {
printf("%02X ", ((u8 *)eeprom->data)[byte_to_write]);
byte_to_write++;
}
}
if (eeprom->page_valid) {
row = MLX5E_EEPROM_HIGH_PAGE_OFFSET;
printf("\n\nUpper Page 0x03\n");
printf("\nOffset\t\tValues\n");
printf("------\t\t------");
while (row < MLX5E_EEPROM_PAGE_LENGTH) {
printf("\n0x%04X\t\t", row);
for (index_in_row = 0; index_in_row < line_length; index_in_row++) {
printf("%02X ", ((u8 *)eeprom->data)[byte_to_write]);
byte_to_write++;
row++;
}
}
}
}
/*
* Read cable EEPROM module information by first inspecting the first
* three bytes to get the initial information for a whole reading.
* Information will be printed to dmesg.
*/
static int
mlx5e_read_eeprom(SYSCTL_HANDLER_ARGS)
{
struct mlx5e_priv *priv = arg1;
struct mlx5e_eeprom eeprom;
int error;
int result = 0;
PRIV_LOCK(priv);
error = sysctl_handle_int(oidp, &result, 0, req);
if (error || !req->newptr)
goto done;
/* Check if device is gone */
if (priv->gone) {
error = ENXIO;
goto done;
}
if (result == 1) {
eeprom.i2c_addr = MLX5E_I2C_ADDR_LOW;
eeprom.device_addr = 0;
eeprom.page_num = MLX5E_EEPROM_LOW_PAGE;
eeprom.page_valid = 0;
/* Read three first bytes to get important info */
error = mlx5e_get_eeprom_info(priv, &eeprom);
if (error) {
if_printf(priv->ifp, "%s:%d: Failed reading eeprom's "
"initial information\n", __func__, __LINE__);
error = 0;
goto done;
}
/*
* Allocate needed length buffer and additional space for
* page 0x03
*/
eeprom.data = malloc(eeprom.len + MLX5E_EEPROM_PAGE_LENGTH,
M_MLX5EN, M_WAITOK | M_ZERO);
/* Read the whole eeprom information */
error = mlx5e_get_eeprom(priv, &eeprom);
if (error) {
if_printf(priv->ifp, "%s:%d: Failed reading eeprom\n",
__func__, __LINE__);
error = 0;
/*
* Continue printing partial information in case of
* an error
*/
}
mlx5e_print_eeprom(&eeprom);
free(eeprom.data, M_MLX5EN);
}
done:
PRIV_UNLOCK(priv);
return (error);
}
static const char *mlx5e_params_desc[] = {
MLX5E_PARAMS(MLX5E_STATS_DESC)
};
static const char *mlx5e_port_stats_debug_desc[] = {
MLX5E_PORT_STATS_DEBUG(MLX5E_STATS_DESC)
};
static int
mlx5e_ethtool_debug_stats(SYSCTL_HANDLER_ARGS)
{
struct mlx5e_priv *priv = arg1;
int error;
int sys_debug;
sys_debug = priv->sysctl_debug;
error = sysctl_handle_int(oidp, &priv->sysctl_debug, 0, req);
if (error || !req->newptr)
return (error);
priv->sysctl_debug = !!priv->sysctl_debug;
if (sys_debug == priv->sysctl_debug)
return (error);
if (priv->sysctl_debug)
mlx5e_create_stats(&priv->stats.port_stats_debug.ctx,
SYSCTL_CHILDREN(priv->sysctl_ifnet), "debug_stats",
mlx5e_port_stats_debug_desc, MLX5E_PORT_STATS_DEBUG_NUM,
priv->stats.port_stats_debug.arg);
else
sysctl_ctx_free(&priv->stats.port_stats_debug.ctx);
return (error);
}
static void
mlx5e_create_diagnostics(struct mlx5e_priv *priv)
{
struct mlx5_core_diagnostics_entry entry;
struct sysctl_ctx_list *ctx;
struct sysctl_oid *node;
int x;
/* sysctl context we are using */
ctx = &priv->sysctl_ctx;
/* create root node */
node = SYSCTL_ADD_NODE(ctx,
SYSCTL_CHILDREN(priv->sysctl_ifnet), OID_AUTO,
"diagnostics", CTLFLAG_RD, NULL, "Diagnostics");
if (node == NULL)
return;
/* create PCI diagnostics */
for (x = 0; x != MLX5_CORE_PCI_DIAGNOSTICS_NUM; x++) {
entry = mlx5_core_pci_diagnostics_table[x];
if (mlx5_core_supports_diagnostics(priv->mdev, entry.counter_id) == 0)
continue;
SYSCTL_ADD_UQUAD(ctx, SYSCTL_CHILDREN(node), OID_AUTO,
entry.desc, CTLFLAG_RD, priv->params_pci.array + x,
"PCI diagnostics counter");
}
/* create general diagnostics */
for (x = 0; x != MLX5_CORE_GENERAL_DIAGNOSTICS_NUM; x++) {
entry = mlx5_core_general_diagnostics_table[x];
if (mlx5_core_supports_diagnostics(priv->mdev, entry.counter_id) == 0)
continue;
SYSCTL_ADD_UQUAD(ctx, SYSCTL_CHILDREN(node), OID_AUTO,
entry.desc, CTLFLAG_RD, priv->params_general.array + x,
"General diagnostics counter");
}
}
void
mlx5e_create_ethtool(struct mlx5e_priv *priv)
{
struct sysctl_oid *node;
const char *pnameunit;
unsigned x;
/* set some defaults */
priv->params_ethtool.tx_queue_size_max = 1 << MLX5E_PARAMS_MAXIMUM_LOG_SQ_SIZE;
priv->params_ethtool.rx_queue_size_max = 1 << MLX5E_PARAMS_MAXIMUM_LOG_RQ_SIZE;
priv->params_ethtool.tx_queue_size = 1 << priv->params.log_sq_size;
priv->params_ethtool.rx_queue_size = 1 << priv->params.log_rq_size;
priv->params_ethtool.channels = priv->params.num_channels;
priv->params_ethtool.coalesce_pkts_max = MLX5E_FLD_MAX(cqc, cq_max_count);
priv->params_ethtool.coalesce_usecs_max = MLX5E_FLD_MAX(cqc, cq_period);
priv->params_ethtool.rx_coalesce_mode = priv->params.rx_cq_moderation_mode;
priv->params_ethtool.rx_coalesce_usecs = priv->params.rx_cq_moderation_usec;
priv->params_ethtool.rx_coalesce_pkts = priv->params.rx_cq_moderation_pkts;
priv->params_ethtool.tx_coalesce_mode = priv->params.tx_cq_moderation_mode;
priv->params_ethtool.tx_coalesce_usecs = priv->params.tx_cq_moderation_usec;
priv->params_ethtool.tx_coalesce_pkts = priv->params.tx_cq_moderation_pkts;
priv->params_ethtool.hw_lro = priv->params.hw_lro_en;
priv->params_ethtool.cqe_zipping = priv->params.cqe_zipping_en;
mlx5e_ethtool_sync_tx_completion_fact(priv);
/* create root node */
node = SYSCTL_ADD_NODE(&priv->sysctl_ctx,
SYSCTL_CHILDREN(priv->sysctl_ifnet), OID_AUTO,
"conf", CTLFLAG_RW, NULL, "Configuration");
if (node == NULL)
return;
for (x = 0; x != MLX5E_PARAMS_NUM; x++) {
/* check for read-only parameter */
if (strstr(mlx5e_params_desc[2 * x], "_max") != NULL) {
SYSCTL_ADD_PROC(&priv->sysctl_ctx, SYSCTL_CHILDREN(node), OID_AUTO,
mlx5e_params_desc[2 * x], CTLTYPE_U64 | CTLFLAG_RD |
CTLFLAG_MPSAFE, priv, x, &mlx5e_ethtool_handler, "QU",
mlx5e_params_desc[2 * x + 1]);
} else {
#if (__FreeBSD_version < 1100000)
char path[64];
#endif
/*
* NOTE: In FreeBSD-11 and newer the
* CTLFLAG_RWTUN flag will take care of
* loading default sysctl value from the
* kernel environment, if any:
*/
SYSCTL_ADD_PROC(&priv->sysctl_ctx, SYSCTL_CHILDREN(node), OID_AUTO,
mlx5e_params_desc[2 * x], CTLTYPE_U64 | CTLFLAG_RWTUN |
CTLFLAG_MPSAFE, priv, x, &mlx5e_ethtool_handler, "QU",
mlx5e_params_desc[2 * x + 1]);
#if (__FreeBSD_version < 1100000)
/* compute path for sysctl */
snprintf(path, sizeof(path), "dev.mce.%d.conf.%s",
device_get_unit(priv->mdev->pdev->dev.bsddev),
mlx5e_params_desc[2 * x]);
/* try to fetch tunable, if any */
if (TUNABLE_QUAD_FETCH(path, &priv->params_ethtool.arg[x]))
mlx5e_ethtool_handler(NULL, priv, x, NULL);
#endif
}
}
SYSCTL_ADD_PROC(&priv->sysctl_ctx, SYSCTL_CHILDREN(node), OID_AUTO,
"debug_stats", CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_MPSAFE, priv,
0, &mlx5e_ethtool_debug_stats, "I", "Extended debug statistics");
pnameunit = device_get_nameunit(priv->mdev->pdev->dev.bsddev);
SYSCTL_ADD_STRING(&priv->sysctl_ctx, SYSCTL_CHILDREN(node),
OID_AUTO, "device_name", CTLFLAG_RD,
__DECONST(void *, pnameunit), 0,
"PCI device name");
/* EEPROM support */
SYSCTL_ADD_PROC(&priv->sysctl_ctx, SYSCTL_CHILDREN(node), OID_AUTO, "eeprom_info",
CTLTYPE_INT | CTLFLAG_RW | CTLFLAG_MPSAFE, priv, 0,
mlx5e_read_eeprom, "I", "EEPROM information");
/* Diagnostics support */
mlx5e_create_diagnostics(priv);
}