0c699761e2
even if mode PS/2 is forced with bootflags. As a matter of fact, chipsets needs some extra configuration for accessing PS/2 mode from ECP. The current patch is only relevant for generic chipsets since specific code is supposed to deal with this during detection.
268 lines
8.0 KiB
C
268 lines
8.0 KiB
C
/*-
|
|
* Copyright (c) 2001 Alcove - Nicolas Souchu
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*
|
|
*/
|
|
#ifndef __PPCREG_H
|
|
#define __PPCREG_H
|
|
|
|
/*
|
|
* Parallel Port Chipset type.
|
|
*/
|
|
#define SMC_LIKE 0
|
|
#define SMC_37C665GT 1
|
|
#define SMC_37C666GT 2
|
|
#define NS_PC87332 3
|
|
#define NS_PC87306 4
|
|
#define INTEL_820191AA 5 /* XXX not implemented */
|
|
#define GENERIC 6
|
|
#define WINB_W83877F 7
|
|
#define WINB_W83877AF 8
|
|
#define WINB_UNKNOWN 9
|
|
#define NS_PC87334 10
|
|
#define SMC_37C935 11
|
|
#define NS_PC87303 12
|
|
|
|
/*
|
|
* Parallel Port Chipset Type. SMC versus GENERIC (others)
|
|
*/
|
|
#define PPC_TYPE_SMCLIKE 0
|
|
#define PPC_TYPE_GENERIC 1
|
|
|
|
/*
|
|
* Generic structure to hold parallel port chipset info.
|
|
*/
|
|
struct ppc_data {
|
|
|
|
int ppc_unit;
|
|
int ppc_model; /* chipset model if detected */
|
|
int ppc_type; /* generic or smclike chipset type */
|
|
|
|
int ppc_mode; /* chipset current mode */
|
|
int ppc_avm; /* chipset available modes */
|
|
int ppc_dtm; /* chipset detected modes */
|
|
|
|
#define PPC_IRQ_NONE 0x0
|
|
#define PPC_IRQ_nACK 0x1
|
|
#define PPC_IRQ_DMA 0x2
|
|
#define PPC_IRQ_FIFO 0x4
|
|
#define PPC_IRQ_nFAULT 0x8
|
|
int ppc_irqstat; /* remind irq settings */
|
|
|
|
#define PPC_DMA_INIT 0x01
|
|
#define PPC_DMA_STARTED 0x02
|
|
#define PPC_DMA_COMPLETE 0x03
|
|
#define PPC_DMA_INTERRUPTED 0x04
|
|
#define PPC_DMA_ERROR 0x05
|
|
int ppc_dmastat; /* dma state */
|
|
int ppc_dmachan; /* dma channel */
|
|
int ppc_dmaflags; /* dma transfer flags */
|
|
caddr_t ppc_dmaddr; /* buffer address */
|
|
u_int ppc_dmacnt; /* count of bytes sent with dma */
|
|
|
|
#define PPC_PWORD_MASK 0x30
|
|
#define PPC_PWORD_16 0x00
|
|
#define PPC_PWORD_8 0x10
|
|
#define PPC_PWORD_32 0x20
|
|
char ppc_pword; /* PWord size */
|
|
short ppc_fifo; /* FIFO threshold */
|
|
|
|
short ppc_wthr; /* writeIntrThresold */
|
|
short ppc_rthr; /* readIntrThresold */
|
|
|
|
char *ppc_ptr; /* microseq current pointer */
|
|
int ppc_accum; /* microseq accumulator */
|
|
int ppc_base; /* parallel port base address */
|
|
int ppc_epp; /* EPP mode (1.7 or 1.9) */
|
|
int ppc_irq;
|
|
|
|
unsigned char ppc_flags;
|
|
|
|
device_t ppbus; /* parallel port chipset corresponding ppbus */
|
|
|
|
int rid_irq, rid_drq, rid_ioport;
|
|
struct resource *res_irq, *res_drq, *res_ioport;
|
|
|
|
void *intr_cookie;
|
|
|
|
int ppc_registered; /* 1 if ppcintr() is the registered interrupt */
|
|
};
|
|
|
|
/*
|
|
* Parallel Port Chipset registers.
|
|
*/
|
|
#define PPC_SPP_DTR 0 /* SPP data register */
|
|
#define PPC_ECP_A_FIFO 0 /* ECP Address fifo register */
|
|
#define PPC_SPP_STR 1 /* SPP status register */
|
|
#define PPC_SPP_CTR 2 /* SPP control register */
|
|
#define PPC_EPP_ADDR 3 /* EPP address register (8 bit) */
|
|
#define PPC_EPP_DATA 4 /* EPP data register (8, 16 or 32 bit) */
|
|
#define PPC_ECP_D_FIFO 0x400 /* ECP Data fifo register */
|
|
#define PPC_ECP_CNFGA 0x400 /* Configuration register A */
|
|
#define PPC_ECP_CNFGB 0x401 /* Configuration register B */
|
|
#define PPC_ECP_ECR 0x402 /* ECP extended control register */
|
|
|
|
#define PPC_FIFO_EMPTY 0x1 /* ecr register - bit 0 */
|
|
#define PPC_FIFO_FULL 0x2 /* ecr register - bit 1 */
|
|
#define PPC_SERVICE_INTR 0x4 /* ecr register - bit 2 */
|
|
#define PPC_ENABLE_DMA 0x8 /* ecr register - bit 3 */
|
|
#define PPC_nFAULT_INTR 0x10 /* ecr register - bit 4 */
|
|
#define PPC_ECR_STD 0x0
|
|
#define PPC_ECR_PS2 0x20
|
|
#define PPC_ECR_FIFO 0x40
|
|
#define PPC_ECR_ECP 0x60
|
|
#define PPC_ECR_EPP 0x80
|
|
|
|
#define PPC_DISABLE_INTR (PPC_SERVICE_INTR | PPC_nFAULT_INTR)
|
|
#define PPC_ECR_RESET (PPC_ECR_PS2 | PPC_DISABLE_INTR)
|
|
|
|
#define r_dtr(ppc) (inb((ppc)->ppc_base + PPC_SPP_DTR))
|
|
#define r_str(ppc) (inb((ppc)->ppc_base + PPC_SPP_STR))
|
|
#define r_ctr(ppc) (inb((ppc)->ppc_base + PPC_SPP_CTR))
|
|
#define r_epp_A(ppc) (inb((ppc)->ppc_base + PPC_EPP_ADDR))
|
|
#define r_epp_D(ppc) (inb((ppc)->ppc_base + PPC_EPP_DATA))
|
|
#define r_cnfgA(ppc) (inb((ppc)->ppc_base + PPC_ECP_CNFGA))
|
|
#define r_cnfgB(ppc) (inb((ppc)->ppc_base + PPC_ECP_CNFGB))
|
|
#define r_ecr(ppc) (inb((ppc)->ppc_base + PPC_ECP_ECR))
|
|
#define r_fifo(ppc) (inb((ppc)->ppc_base + PPC_ECP_D_FIFO))
|
|
|
|
#define w_dtr(ppc,byte) outb((ppc)->ppc_base + PPC_SPP_DTR, byte)
|
|
#define w_str(ppc,byte) outb((ppc)->ppc_base + PPC_SPP_STR, byte)
|
|
#define w_ctr(ppc,byte) outb((ppc)->ppc_base + PPC_SPP_CTR, byte)
|
|
#define w_epp_A(ppc,byte) outb((ppc)->ppc_base + PPC_EPP_ADDR, byte)
|
|
#define w_epp_D(ppc,byte) outb((ppc)->ppc_base + PPC_EPP_DATA, byte)
|
|
#define w_ecr(ppc,byte) outb((ppc)->ppc_base + PPC_ECP_ECR, byte)
|
|
#define w_fifo(ppc,byte) outb((ppc)->ppc_base + PPC_ECP_D_FIFO, byte)
|
|
|
|
/*
|
|
* Register defines for the PC873xx parts
|
|
*/
|
|
|
|
#define PC873_FER 0x00
|
|
#define PC873_PPENABLE (1<<0)
|
|
#define PC873_FAR 0x01
|
|
#define PC873_PTR 0x02
|
|
#define PC873_CFGLOCK (1<<6)
|
|
#define PC873_EPPRDIR (1<<7)
|
|
#define PC873_EXTENDED (1<<7)
|
|
#define PC873_LPTBIRQ7 (1<<3)
|
|
#define PC873_FCR 0x03
|
|
#define PC873_ZWS (1<<5)
|
|
#define PC873_ZWSPWDN (1<<6)
|
|
#define PC873_PCR 0x04
|
|
#define PC873_EPPEN (1<<0)
|
|
#define PC873_EPP19 (1<<1)
|
|
#define PC873_ECPEN (1<<2)
|
|
#define PC873_ECPCLK (1<<3)
|
|
#define PC873_PMC 0x06
|
|
#define PC873_TUP 0x07
|
|
#define PC873_SID 0x08
|
|
#define PC873_PNP0 0x1b
|
|
#define PC873_PNP1 0x1c
|
|
#define PC873_LPTBA 0x19
|
|
|
|
/*
|
|
* Register defines for the SMC FDC37C66xGT parts
|
|
*/
|
|
|
|
/* Init codes */
|
|
#define SMC665_iCODE 0x55
|
|
#define SMC666_iCODE 0x44
|
|
|
|
/* Base configuration ports */
|
|
#define SMC66x_CSR 0x3F0
|
|
#define SMC666_CSR 0x370 /* hard-configured value for 666 */
|
|
|
|
/* Bits */
|
|
#define SMC_CR1_ADDR 0x3 /* bit 0 and 1 */
|
|
#define SMC_CR1_MODE (1<<3) /* bit 3 */
|
|
#define SMC_CR4_EMODE 0x3 /* bits 0 and 1 */
|
|
#define SMC_CR4_EPPTYPE (1<<6) /* bit 6 */
|
|
|
|
/* Extended modes */
|
|
#define SMC_SPP 0x0 /* SPP */
|
|
#define SMC_EPPSPP 0x1 /* EPP and SPP */
|
|
#define SMC_ECP 0x2 /* ECP */
|
|
#define SMC_ECPEPP 0x3 /* ECP and EPP */
|
|
|
|
/*
|
|
* Register defines for the SMC FDC37C935 parts
|
|
*/
|
|
|
|
/* Configuration ports */
|
|
#define SMC935_CFG 0x370
|
|
#define SMC935_IND 0x370
|
|
#define SMC935_DAT 0x371
|
|
|
|
/* Registers */
|
|
#define SMC935_LOGDEV 0x7
|
|
#define SMC935_ID 0x20
|
|
#define SMC935_PORTHI 0x60
|
|
#define SMC935_PORTLO 0x61
|
|
#define SMC935_PPMODE 0xf0
|
|
|
|
/* Parallel port modes */
|
|
#define SMC935_SPP 0x38 + 0
|
|
#define SMC935_EPP19SPP 0x38 + 1
|
|
#define SMC935_ECP 0x38 + 2
|
|
#define SMC935_ECPEPP19 0x38 + 3
|
|
#define SMC935_CENT 0x38 + 4
|
|
#define SMC935_EPP17SPP 0x38 + 5
|
|
#define SMC935_UNUSED 0x38 + 6
|
|
#define SMC935_ECPEPP17 0x38 + 7
|
|
|
|
/*
|
|
* Register defines for the Winbond W83877F parts
|
|
*/
|
|
|
|
#define WINB_W83877F_ID 0xa
|
|
#define WINB_W83877AF_ID 0xb
|
|
|
|
/* Configuration bits */
|
|
#define WINB_HEFERE (1<<5) /* CROC bit 5 */
|
|
#define WINB_HEFRAS (1<<0) /* CR16 bit 0 */
|
|
|
|
#define WINB_PNPCVS (1<<2) /* CR16 bit 2 */
|
|
#define WINB_CHIPID 0xf /* CR9 bits 0-3 */
|
|
|
|
#define WINB_PRTMODS0 (1<<2) /* CR0 bit 2 */
|
|
#define WINB_PRTMODS1 (1<<3) /* CR0 bit 3 */
|
|
#define WINB_PRTMODS2 (1<<7) /* CR9 bit 7 */
|
|
|
|
/* W83877F modes: CR9/bit7 | CR0/bit3 | CR0/bit2 */
|
|
#define WINB_W83757 0x0
|
|
#define WINB_EXTFDC 0x4
|
|
#define WINB_EXTADP 0x8
|
|
#define WINB_EXT2FDD 0xc
|
|
#define WINB_JOYSTICK 0x80
|
|
|
|
#define WINB_PARALLEL 0x80
|
|
#define WINB_EPP_SPP 0x4
|
|
#define WINB_ECP 0x8
|
|
#define WINB_ECP_EPP 0xc
|
|
|
|
#endif
|