freebsd-dev/sys/mips/atheros/ar724xreg.h
Adrian Chadd c55baa23d8 Add the missing AR724x DDR flush routines for if_arge0.
Submitted by: Luiz Otavio O Souza
2011-03-13 08:36:57 +00:00

88 lines
3.4 KiB
C

/*-
* Copyright (c) 2010 Adrian Chadd
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/* $FreeBSD$ */
#ifndef __AR72XX_REG_H__
#define __AR72XX_REG_H__
#define AR724X_PLL_REG_CPU_CONFIG AR71XX_PLL_CPU_BASE + 0x00
#define AR724X_PLL_REG_PCIE_CONFIG AR71XX_PLL_CPU_BASE + 0x18
#define AR724X_PLL_DIV_SHIFT 0
#define AR724X_PLL_DIV_MASK 0x3ff
#define AR724X_PLL_REF_DIV_SHIFT 10
#define AR724X_PLL_REF_DIV_MASK 0xf
#define AR724X_AHB_DIV_SHIFT 19
#define AR724X_AHB_DIV_MASK 0x1
#define AR724X_DDR_DIV_SHIFT 22
#define AR724X_DDR_DIV_MASK 0x3
#define AR724X_PLL_VAL_1000 0x00110000
#define AR724X_PLL_VAL_100 0x00001099
#define AR724X_PLL_VAL_10 0x00991099
#define AR724X_BASE_FREQ 5000000
#define AR724X_DDR_REG_FLUSH_GE0 (AR71XX_DDR_CONFIG + 0x7c)
#define AR724X_DDR_REG_FLUSH_GE1 (AR71XX_DDR_CONFIG + 0x80)
#define AR724X_RESET_REG_RESET_MODULE AR71XX_RST_BLOCK_BASE + 0x1c
#define AR724X_RESET_MODULE_USB_OHCI_DLL (1 << 3)
/* XXX so USB requires different init code? -adrian */
#define AR7240_OHCI_BASE 0x1b000000
#define AR7240_OHCI_SIZE 0x01000000
#define AR724X_DDR_REG_FLUSH_USB (AR71XX_DDR_CONFIG + 0x84)
#define AR724X_PCI_CRP_BASE (AR71XX_APB_BASE + 0x000C0000)
#define AR724X_PCI_CRP_SIZE 0x100
#define AR724X_PCI_CTRL_BASE (AR71XX_APB_BASE + 0x000F0000)
#define AR724X_PCI_CTRL_SIZE 0x100
#define AR724X_GPIO_FUNC_GE0_MII_CLK_EN (1 >> 19)
#define AR724X_GPIO_FUNC_SPI_EN (1 >> 18)
#define AR724X_GPIO_FUNC_SPI_CS_EN2 (1 >> 14)
#define AR724X_GPIO_FUNC_SPI_CS_EN1 (1 >> 13)
#define AR724X_GPIO_FUNC_CLK_OBS5_EN (1 >> 12)
#define AR724X_GPIO_FUNC_CLK_OBS4_EN (1 >> 11)
#define AR724X_GPIO_FUNC_CLK_OBS3_EN (1 >> 10)
#define AR724X_GPIO_FUNC_CLK_OBS2_EN (1 >> 9)
#define AR724X_GPIO_FUNC_CLK_OBS1_EN (1 >> 8)
#define AR724X_GPIO_FUNC_ETH_SWITCH_LED4_EN (1 >> 7)
#define AR724X_GPIO_FUNC_ETH_SWITCH_LED3_EN (1 >> 6)
#define AR724X_GPIO_FUNC_ETH_SWITCH_LED2_EN (1 >> 5)
#define AR724X_GPIO_FUNC_ETH_SWITCH_LED1_EN (1 >> 4)
#define AR724X_GPIO_FUNC_ETH_SWITCH_LED0_EN (1 >> 3)
#define AR724X_GPIO_FUNC_UART_RTS_CTS_EN (1 >> 2)
#define AR724X_GPIO_FUNC_UART_EN (1 >> 1)
#define AR724X_GPIO_FUNC_JTAG_DISABLE (1 >> 0)
#define AR724X_GPIO_COUNT 18
#endif