2015 lines
62 KiB
C
2015 lines
62 KiB
C
/* $NetBSD: uftdi.c,v 1.13 2002/09/23 05:51:23 simonb Exp $ */
|
|
|
|
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause-NetBSD
|
|
*
|
|
* Copyright (c) 2000 The NetBSD Foundation, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* This code is derived from software contributed to The NetBSD Foundation
|
|
* by Lennart Augustsson (lennart@augustsson.net).
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
|
|
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
|
|
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
|
|
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* NOTE: all function names beginning like "uftdi_cfg_" can only
|
|
* be called from within the config thread function !
|
|
*/
|
|
|
|
/*
|
|
* FTDI FT232x, FT2232x, FT4232x, FT8U100AX and FT8U232xM serial adapters.
|
|
*
|
|
* Note that we specifically do not do a reset or otherwise alter the state of
|
|
* the chip during attach, detach, open, and close, because it could be
|
|
* pre-initialized (via an attached serial eeprom) to power-on into a mode such
|
|
* as bitbang in which the pins are being driven to a specific state which we
|
|
* must not perturb. The device gets reset at power-on, and doesn't need to be
|
|
* reset again after that to function, except as directed by ioctl() calls.
|
|
*/
|
|
|
|
#include <sys/stdint.h>
|
|
#include <sys/stddef.h>
|
|
#include <sys/param.h>
|
|
#include <sys/queue.h>
|
|
#include <sys/types.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/module.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/condvar.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/sx.h>
|
|
#include <sys/unistd.h>
|
|
#include <sys/callout.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/priv.h>
|
|
|
|
#include <dev/usb/usb.h>
|
|
#include <dev/usb/usbdi.h>
|
|
#include <dev/usb/usbdi_util.h>
|
|
#include <dev/usb/usb_core.h>
|
|
#include <dev/usb/usb_ioctl.h>
|
|
#include "usbdevs.h"
|
|
|
|
#define USB_DEBUG_VAR uftdi_debug
|
|
#include <dev/usb/usb_debug.h>
|
|
#include <dev/usb/usb_process.h>
|
|
|
|
#include <dev/usb/serial/usb_serial.h>
|
|
#include <dev/usb/serial/uftdi_reg.h>
|
|
#include <dev/usb/uftdiio.h>
|
|
|
|
static SYSCTL_NODE(_hw_usb, OID_AUTO, uftdi, CTLFLAG_RW | CTLFLAG_MPSAFE, 0,
|
|
"USB uftdi");
|
|
|
|
#ifdef USB_DEBUG
|
|
static int uftdi_debug = 0;
|
|
SYSCTL_INT(_hw_usb_uftdi, OID_AUTO, debug, CTLFLAG_RWTUN,
|
|
&uftdi_debug, 0, "Debug level");
|
|
#endif
|
|
|
|
#define UFTDI_CONFIG_INDEX 0
|
|
|
|
/*
|
|
* IO buffer sizes and FTDI device procotol sizes.
|
|
*
|
|
* Note that the output packet size in the following defines is not the usb
|
|
* protocol packet size based on bus speed, it is the size dictated by the FTDI
|
|
* device itself, and is used only on older chips.
|
|
*
|
|
* We allocate buffers bigger than the hardware's packet size, and process
|
|
* multiple packets within each buffer. This allows the controller to make
|
|
* optimal use of the usb bus by conducting multiple transfers with the device
|
|
* during a single bus timeslice to fill or drain the chip's fifos.
|
|
*
|
|
* The output data on newer chips has no packet header, and we are able to pack
|
|
* any number of output bytes into a buffer. On some older chips, each output
|
|
* packet contains a 1-byte header and up to 63 bytes of payload. The size is
|
|
* encoded in 6 bits of the header, hence the 64-byte limit on packet size. We
|
|
* loop to fill the buffer with many of these header+payload packets.
|
|
*
|
|
* The input data on all chips consists of packets which contain a 2-byte header
|
|
* followed by data payload. The total size of the packet is wMaxPacketSize
|
|
* which can change based on the bus speed (e.g., 64 for full speed, 512 for
|
|
* high speed). We loop to extract the headers and payloads from the packets
|
|
* packed into an input buffer.
|
|
*/
|
|
#define UFTDI_IBUFSIZE 2048
|
|
#define UFTDI_IHDRSIZE 2
|
|
#define UFTDI_OBUFSIZE 2048
|
|
#define UFTDI_OPKTSIZE 64
|
|
|
|
enum {
|
|
UFTDI_BULK_DT_WR,
|
|
UFTDI_BULK_DT_RD,
|
|
UFTDI_N_TRANSFER,
|
|
};
|
|
|
|
enum {
|
|
DEVT_SIO,
|
|
DEVT_232A,
|
|
DEVT_232B,
|
|
DEVT_2232D, /* Includes 2232C */
|
|
DEVT_232R,
|
|
DEVT_2232H,
|
|
DEVT_4232H,
|
|
DEVT_232H,
|
|
DEVT_230X,
|
|
};
|
|
|
|
#define DEVF_BAUDBITS_HINDEX 0x01 /* Baud bits in high byte of index. */
|
|
#define DEVF_BAUDCLK_12M 0X02 /* Base baud clock is 12MHz. */
|
|
|
|
struct uftdi_softc {
|
|
struct ucom_super_softc sc_super_ucom;
|
|
struct ucom_softc sc_ucom;
|
|
|
|
struct usb_device *sc_udev;
|
|
struct usb_xfer *sc_xfer[UFTDI_N_TRANSFER];
|
|
device_t sc_dev;
|
|
struct mtx sc_mtx;
|
|
|
|
uint32_t sc_unit;
|
|
|
|
uint16_t sc_last_lcr;
|
|
uint16_t sc_bcdDevice;
|
|
|
|
uint8_t sc_devtype;
|
|
uint8_t sc_devflags;
|
|
uint8_t sc_hdrlen;
|
|
uint8_t sc_msr;
|
|
uint8_t sc_lsr;
|
|
uint8_t sc_bitmode;
|
|
};
|
|
|
|
struct uftdi_param_config {
|
|
uint16_t baud_lobits;
|
|
uint16_t baud_hibits;
|
|
uint16_t lcr;
|
|
uint8_t v_start;
|
|
uint8_t v_stop;
|
|
uint8_t v_flow;
|
|
};
|
|
|
|
/* prototypes */
|
|
|
|
static device_probe_t uftdi_probe;
|
|
static device_attach_t uftdi_attach;
|
|
static device_detach_t uftdi_detach;
|
|
static void uftdi_free_softc(struct uftdi_softc *);
|
|
|
|
static usb_callback_t uftdi_write_callback;
|
|
static usb_callback_t uftdi_read_callback;
|
|
|
|
static void uftdi_free(struct ucom_softc *);
|
|
static void uftdi_cfg_open(struct ucom_softc *);
|
|
static void uftdi_cfg_close(struct ucom_softc *);
|
|
static void uftdi_cfg_set_dtr(struct ucom_softc *, uint8_t);
|
|
static void uftdi_cfg_set_rts(struct ucom_softc *, uint8_t);
|
|
static void uftdi_cfg_set_break(struct ucom_softc *, uint8_t);
|
|
static int uftdi_set_parm_soft(struct ucom_softc *, struct termios *,
|
|
struct uftdi_param_config *);
|
|
static int uftdi_pre_param(struct ucom_softc *, struct termios *);
|
|
static void uftdi_cfg_param(struct ucom_softc *, struct termios *);
|
|
static void uftdi_cfg_get_status(struct ucom_softc *, uint8_t *,
|
|
uint8_t *);
|
|
static int uftdi_reset(struct ucom_softc *, int);
|
|
static int uftdi_set_bitmode(struct ucom_softc *, uint8_t, uint8_t);
|
|
static int uftdi_get_bitmode(struct ucom_softc *, uint8_t *, uint8_t *);
|
|
static int uftdi_set_latency(struct ucom_softc *, int);
|
|
static int uftdi_get_latency(struct ucom_softc *, int *);
|
|
static int uftdi_set_event_char(struct ucom_softc *, int);
|
|
static int uftdi_set_error_char(struct ucom_softc *, int);
|
|
static int uftdi_ioctl(struct ucom_softc *, uint32_t, caddr_t, int,
|
|
struct thread *);
|
|
static void uftdi_start_read(struct ucom_softc *);
|
|
static void uftdi_stop_read(struct ucom_softc *);
|
|
static void uftdi_start_write(struct ucom_softc *);
|
|
static void uftdi_stop_write(struct ucom_softc *);
|
|
static void uftdi_poll(struct ucom_softc *ucom);
|
|
|
|
static const struct usb_config uftdi_config[UFTDI_N_TRANSFER] = {
|
|
[UFTDI_BULK_DT_WR] = {
|
|
.type = UE_BULK,
|
|
.endpoint = UE_ADDR_ANY,
|
|
.direction = UE_DIR_OUT,
|
|
.bufsize = UFTDI_OBUFSIZE,
|
|
.flags = {.pipe_bof = 1,},
|
|
.callback = &uftdi_write_callback,
|
|
},
|
|
|
|
[UFTDI_BULK_DT_RD] = {
|
|
.type = UE_BULK,
|
|
.endpoint = UE_ADDR_ANY,
|
|
.direction = UE_DIR_IN,
|
|
.bufsize = UFTDI_IBUFSIZE,
|
|
.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
|
|
.callback = &uftdi_read_callback,
|
|
},
|
|
};
|
|
|
|
static const struct ucom_callback uftdi_callback = {
|
|
.ucom_cfg_get_status = &uftdi_cfg_get_status,
|
|
.ucom_cfg_set_dtr = &uftdi_cfg_set_dtr,
|
|
.ucom_cfg_set_rts = &uftdi_cfg_set_rts,
|
|
.ucom_cfg_set_break = &uftdi_cfg_set_break,
|
|
.ucom_cfg_param = &uftdi_cfg_param,
|
|
.ucom_cfg_open = &uftdi_cfg_open,
|
|
.ucom_cfg_close = &uftdi_cfg_close,
|
|
.ucom_pre_param = &uftdi_pre_param,
|
|
.ucom_ioctl = &uftdi_ioctl,
|
|
.ucom_start_read = &uftdi_start_read,
|
|
.ucom_stop_read = &uftdi_stop_read,
|
|
.ucom_start_write = &uftdi_start_write,
|
|
.ucom_stop_write = &uftdi_stop_write,
|
|
.ucom_poll = &uftdi_poll,
|
|
.ucom_free = &uftdi_free,
|
|
};
|
|
|
|
static device_method_t uftdi_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, uftdi_probe),
|
|
DEVMETHOD(device_attach, uftdi_attach),
|
|
DEVMETHOD(device_detach, uftdi_detach),
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static devclass_t uftdi_devclass;
|
|
|
|
static driver_t uftdi_driver = {
|
|
.name = "uftdi",
|
|
.methods = uftdi_methods,
|
|
.size = sizeof(struct uftdi_softc),
|
|
};
|
|
|
|
static const STRUCT_USB_HOST_ID uftdi_devs[] = {
|
|
#define UFTDI_DEV(v, p, i) \
|
|
{ USB_VPI(USB_VENDOR_##v, USB_PRODUCT_##v##_##p, i) }
|
|
UFTDI_DEV(ACTON, SPECTRAPRO, 0),
|
|
UFTDI_DEV(ALTI2, N3, 0),
|
|
UFTDI_DEV(ANALOGDEVICES, GNICE, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(ANALOGDEVICES, GNICEPLUS, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(ATMEL, STK541, 0),
|
|
UFTDI_DEV(BAYER, CONTOUR_CABLE, 0),
|
|
UFTDI_DEV(BBELECTRONICS, 232USB9M, 0),
|
|
UFTDI_DEV(BBELECTRONICS, 485USB9F_2W, 0),
|
|
UFTDI_DEV(BBELECTRONICS, 485USB9F_4W, 0),
|
|
UFTDI_DEV(BBELECTRONICS, 485USBTB_2W, 0),
|
|
UFTDI_DEV(BBELECTRONICS, 485USBTB_4W, 0),
|
|
UFTDI_DEV(BBELECTRONICS, TTL3USB9M, 0),
|
|
UFTDI_DEV(BBELECTRONICS, TTL5USB9M, 0),
|
|
UFTDI_DEV(BBELECTRONICS, USO9ML2, 0),
|
|
UFTDI_DEV(BBELECTRONICS, USO9ML2DR, 0),
|
|
UFTDI_DEV(BBELECTRONICS, USO9ML2DR_2, 0),
|
|
UFTDI_DEV(BBELECTRONICS, USOPTL4, 0),
|
|
UFTDI_DEV(BBELECTRONICS, USOPTL4DR, 0),
|
|
UFTDI_DEV(BBELECTRONICS, USOPTL4DR2, 0),
|
|
UFTDI_DEV(BBELECTRONICS, USOTL4, 0),
|
|
UFTDI_DEV(BBELECTRONICS, USPTL4, 0),
|
|
UFTDI_DEV(BBELECTRONICS, USTL4, 0),
|
|
UFTDI_DEV(BBELECTRONICS, ZZ_PROG1_USB, 0),
|
|
UFTDI_DEV(BRAINBOXES, US257, 0),
|
|
UFTDI_DEV(BRAINBOXES, US25701, 0),
|
|
UFTDI_DEV(CONTEC, COM1USBH, 0),
|
|
UFTDI_DEV(DRESDENELEKTRONIK, SENSORTERMINALBOARD, 0),
|
|
UFTDI_DEV(DRESDENELEKTRONIK, WIRELESSHANDHELDTERMINAL, 0),
|
|
UFTDI_DEV(DRESDENELEKTRONIK, DE_RFNODE, 0),
|
|
UFTDI_DEV(DRESDENELEKTRONIK, LEVELSHIFTERSTICKLOWCOST, 0),
|
|
UFTDI_DEV(ELEKTOR, FT323R, 0),
|
|
UFTDI_DEV(EVOLUTION, ER1, 0),
|
|
UFTDI_DEV(EVOLUTION, HYBRID, 0),
|
|
UFTDI_DEV(EVOLUTION, RCM4, 0),
|
|
UFTDI_DEV(FALCOM, SAMBA, 0),
|
|
UFTDI_DEV(FALCOM, TWIST, 0),
|
|
UFTDI_DEV(FIC, NEO1973_DEBUG, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(FIC, NEO1973_DEBUG, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(FTDI, 232EX, 0),
|
|
UFTDI_DEV(FTDI, 232H, 0),
|
|
UFTDI_DEV(FTDI, 232RL, 0),
|
|
UFTDI_DEV(FTDI, 4N_GALAXY_DE_1, 0),
|
|
UFTDI_DEV(FTDI, 4N_GALAXY_DE_2, 0),
|
|
UFTDI_DEV(FTDI, 4N_GALAXY_DE_3, 0),
|
|
UFTDI_DEV(FTDI, 8U232AM_ALT, 0),
|
|
UFTDI_DEV(FTDI, ACCESSO, 0),
|
|
UFTDI_DEV(FTDI, ACG_HFDUAL, 0),
|
|
UFTDI_DEV(FTDI, ACTIVE_ROBOTS, 0),
|
|
UFTDI_DEV(FTDI, ACTZWAVE, 0),
|
|
UFTDI_DEV(FTDI, AMC232, 0),
|
|
UFTDI_DEV(FTDI, ARTEMIS, 0),
|
|
UFTDI_DEV(FTDI, ASK_RDR400, 0),
|
|
UFTDI_DEV(FTDI, ATIK_ATK16, 0),
|
|
UFTDI_DEV(FTDI, ATIK_ATK16C, 0),
|
|
UFTDI_DEV(FTDI, ATIK_ATK16HR, 0),
|
|
UFTDI_DEV(FTDI, ATIK_ATK16HRC, 0),
|
|
UFTDI_DEV(FTDI, ATIK_ATK16IC, 0),
|
|
UFTDI_DEV(FTDI, BCS_SE923, 0),
|
|
UFTDI_DEV(FTDI, CANDAPTER, 0),
|
|
UFTDI_DEV(FTDI, CANUSB, 0),
|
|
UFTDI_DEV(FTDI, CCSICDU20_0, 0),
|
|
UFTDI_DEV(FTDI, CCSICDU40_1, 0),
|
|
UFTDI_DEV(FTDI, CCSICDU64_4, 0),
|
|
UFTDI_DEV(FTDI, CCSLOAD_N_GO_3, 0),
|
|
UFTDI_DEV(FTDI, CCSMACHX_2, 0),
|
|
UFTDI_DEV(FTDI, CCSPRIME8_5, 0),
|
|
UFTDI_DEV(FTDI, CFA_631, 0),
|
|
UFTDI_DEV(FTDI, CFA_632, 0),
|
|
UFTDI_DEV(FTDI, CFA_633, 0),
|
|
UFTDI_DEV(FTDI, CFA_634, 0),
|
|
UFTDI_DEV(FTDI, CFA_635, 0),
|
|
UFTDI_DEV(FTDI, CHAMSYS_24_MASTER_WING, 0),
|
|
UFTDI_DEV(FTDI, CHAMSYS_MAXI_WING, 0),
|
|
UFTDI_DEV(FTDI, CHAMSYS_MEDIA_WING, 0),
|
|
UFTDI_DEV(FTDI, CHAMSYS_MIDI_TIMECODE, 0),
|
|
UFTDI_DEV(FTDI, CHAMSYS_MINI_WING, 0),
|
|
UFTDI_DEV(FTDI, CHAMSYS_PC_WING, 0),
|
|
UFTDI_DEV(FTDI, CHAMSYS_USB_DMX, 0),
|
|
UFTDI_DEV(FTDI, CHAMSYS_WING, 0),
|
|
UFTDI_DEV(FTDI, COM4SM, 0),
|
|
UFTDI_DEV(FTDI, CONVERTER_0, 0),
|
|
UFTDI_DEV(FTDI, CONVERTER_1, 0),
|
|
UFTDI_DEV(FTDI, CONVERTER_2, 0),
|
|
UFTDI_DEV(FTDI, CONVERTER_3, 0),
|
|
UFTDI_DEV(FTDI, CONVERTER_4, 0),
|
|
UFTDI_DEV(FTDI, CONVERTER_5, 0),
|
|
UFTDI_DEV(FTDI, CONVERTER_6, 0),
|
|
UFTDI_DEV(FTDI, CONVERTER_7, 0),
|
|
UFTDI_DEV(FTDI, CTI_USB_MINI_485, 0),
|
|
UFTDI_DEV(FTDI, CTI_USB_NANO_485, 0),
|
|
UFTDI_DEV(FTDI, DMX4ALL, 0),
|
|
UFTDI_DEV(FTDI, DOMINTELL_DGQG, 0),
|
|
UFTDI_DEV(FTDI, DOMINTELL_DUSB, 0),
|
|
UFTDI_DEV(FTDI, DOTEC, 0),
|
|
UFTDI_DEV(FTDI, ECLO_COM_1WIRE, 0),
|
|
UFTDI_DEV(FTDI, ECO_PRO_CDS, 0),
|
|
UFTDI_DEV(FTDI, EISCOU, 0),
|
|
UFTDI_DEV(FTDI, ELSTER_UNICOM, 0),
|
|
UFTDI_DEV(FTDI, ELV_ALC8500, 0),
|
|
UFTDI_DEV(FTDI, ELV_CLI7000, 0),
|
|
UFTDI_DEV(FTDI, ELV_CSI8, 0),
|
|
UFTDI_DEV(FTDI, ELV_EC3000, 0),
|
|
UFTDI_DEV(FTDI, ELV_EM1000DL, 0),
|
|
UFTDI_DEV(FTDI, ELV_EM1010PC, 0),
|
|
UFTDI_DEV(FTDI, ELV_FEM, 0),
|
|
UFTDI_DEV(FTDI, ELV_FHZ1000PC, 0),
|
|
UFTDI_DEV(FTDI, ELV_FHZ1300PC, 0),
|
|
UFTDI_DEV(FTDI, ELV_FM3RX, 0),
|
|
UFTDI_DEV(FTDI, ELV_FS20SIG, 0),
|
|
UFTDI_DEV(FTDI, ELV_HS485, 0),
|
|
UFTDI_DEV(FTDI, ELV_KL100, 0),
|
|
UFTDI_DEV(FTDI, ELV_MSM1, 0),
|
|
UFTDI_DEV(FTDI, ELV_PCD200, 0),
|
|
UFTDI_DEV(FTDI, ELV_PCK100, 0),
|
|
UFTDI_DEV(FTDI, ELV_PPS7330, 0),
|
|
UFTDI_DEV(FTDI, ELV_RFP500, 0),
|
|
UFTDI_DEV(FTDI, ELV_T1100, 0),
|
|
UFTDI_DEV(FTDI, ELV_TFD128, 0),
|
|
UFTDI_DEV(FTDI, ELV_TFM100, 0),
|
|
UFTDI_DEV(FTDI, ELV_TWS550, 0),
|
|
UFTDI_DEV(FTDI, ELV_UAD8, 0),
|
|
UFTDI_DEV(FTDI, ELV_UDA7, 0),
|
|
UFTDI_DEV(FTDI, ELV_UDF77, 0),
|
|
UFTDI_DEV(FTDI, ELV_UIO88, 0),
|
|
UFTDI_DEV(FTDI, ELV_ULA200, 0),
|
|
UFTDI_DEV(FTDI, ELV_UM100, 0),
|
|
UFTDI_DEV(FTDI, ELV_UMS100, 0),
|
|
UFTDI_DEV(FTDI, ELV_UO100, 0),
|
|
UFTDI_DEV(FTDI, ELV_UR100, 0),
|
|
UFTDI_DEV(FTDI, ELV_USI2, 0),
|
|
UFTDI_DEV(FTDI, ELV_USR, 0),
|
|
UFTDI_DEV(FTDI, ELV_UTP8, 0),
|
|
UFTDI_DEV(FTDI, ELV_WS300PC, 0),
|
|
UFTDI_DEV(FTDI, ELV_WS444PC, 0),
|
|
UFTDI_DEV(FTDI, ELV_WS500, 0),
|
|
UFTDI_DEV(FTDI, ELV_WS550, 0),
|
|
UFTDI_DEV(FTDI, ELV_WS777, 0),
|
|
UFTDI_DEV(FTDI, ELV_WS888, 0),
|
|
UFTDI_DEV(FTDI, EMCU2D, 0),
|
|
UFTDI_DEV(FTDI, EMCU2H, 0),
|
|
UFTDI_DEV(FTDI, FUTURE_0, 0),
|
|
UFTDI_DEV(FTDI, FUTURE_1, 0),
|
|
UFTDI_DEV(FTDI, FUTURE_2, 0),
|
|
UFTDI_DEV(FTDI, GAMMASCOUT, 0),
|
|
UFTDI_DEV(FTDI, GENERIC, 0),
|
|
UFTDI_DEV(FTDI, GUDEADS_E808, 0),
|
|
UFTDI_DEV(FTDI, GUDEADS_E809, 0),
|
|
UFTDI_DEV(FTDI, GUDEADS_E80A, 0),
|
|
UFTDI_DEV(FTDI, GUDEADS_E80B, 0),
|
|
UFTDI_DEV(FTDI, GUDEADS_E80C, 0),
|
|
UFTDI_DEV(FTDI, GUDEADS_E80D, 0),
|
|
UFTDI_DEV(FTDI, GUDEADS_E80E, 0),
|
|
UFTDI_DEV(FTDI, GUDEADS_E80F, 0),
|
|
UFTDI_DEV(FTDI, GUDEADS_E88D, 0),
|
|
UFTDI_DEV(FTDI, GUDEADS_E88E, 0),
|
|
UFTDI_DEV(FTDI, GUDEADS_E88F, 0),
|
|
UFTDI_DEV(FTDI, HD_RADIO, 0),
|
|
UFTDI_DEV(FTDI, HO720, 0),
|
|
UFTDI_DEV(FTDI, HO730, 0),
|
|
UFTDI_DEV(FTDI, HO820, 0),
|
|
UFTDI_DEV(FTDI, HO870, 0),
|
|
UFTDI_DEV(FTDI, IBS_APP70, 0),
|
|
UFTDI_DEV(FTDI, IBS_PCMCIA, 0),
|
|
UFTDI_DEV(FTDI, IBS_PEDO, 0),
|
|
UFTDI_DEV(FTDI, IBS_PICPRO, 0),
|
|
UFTDI_DEV(FTDI, IBS_PK1, 0),
|
|
UFTDI_DEV(FTDI, IBS_PROD, 0),
|
|
UFTDI_DEV(FTDI, IBS_RS232MON, 0),
|
|
UFTDI_DEV(FTDI, IBS_US485, 0),
|
|
UFTDI_DEV(FTDI, IPLUS, 0),
|
|
UFTDI_DEV(FTDI, IPLUS2, 0),
|
|
UFTDI_DEV(FTDI, IRTRANS, 0),
|
|
UFTDI_DEV(FTDI, KBS, 0),
|
|
UFTDI_DEV(FTDI, KTLINK, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(FTDI, LENZ_LIUSB, 0),
|
|
UFTDI_DEV(FTDI, LK202, 0),
|
|
UFTDI_DEV(FTDI, LK204, 0),
|
|
UFTDI_DEV(FTDI, LM3S_DEVEL_BOARD, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(FTDI, LM3S_EVAL_BOARD, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(FTDI, LM3S_ICDI_B_BOARD, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(FTDI, MASTERDEVEL2, 0),
|
|
UFTDI_DEV(FTDI, MAXSTREAM, 0),
|
|
UFTDI_DEV(FTDI, MHAM_DB9, 0),
|
|
UFTDI_DEV(FTDI, MHAM_IC, 0),
|
|
UFTDI_DEV(FTDI, MHAM_KW, 0),
|
|
UFTDI_DEV(FTDI, MHAM_RS232, 0),
|
|
UFTDI_DEV(FTDI, MHAM_Y6, 0),
|
|
UFTDI_DEV(FTDI, MHAM_Y8, 0),
|
|
UFTDI_DEV(FTDI, MHAM_Y9, 0),
|
|
UFTDI_DEV(FTDI, MHAM_YS, 0),
|
|
UFTDI_DEV(FTDI, MICRO_CHAMELEON, 0),
|
|
UFTDI_DEV(FTDI, MTXORB_5, 0),
|
|
UFTDI_DEV(FTDI, MTXORB_6, 0),
|
|
UFTDI_DEV(FTDI, MX2_3, 0),
|
|
UFTDI_DEV(FTDI, MX4_5, 0),
|
|
UFTDI_DEV(FTDI, NXTCAM, 0),
|
|
UFTDI_DEV(FTDI, OCEANIC, 0),
|
|
UFTDI_DEV(FTDI, OOCDLINK, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(FTDI, OPENDCC, 0),
|
|
UFTDI_DEV(FTDI, OPENDCC_GATEWAY, 0),
|
|
UFTDI_DEV(FTDI, OPENDCC_GBM, 0),
|
|
UFTDI_DEV(FTDI, OPENDCC_SNIFFER, 0),
|
|
UFTDI_DEV(FTDI, OPENDCC_THROTTLE, 0),
|
|
UFTDI_DEV(FTDI, PCDJ_DAC2, 0),
|
|
UFTDI_DEV(FTDI, PCMSFU, 0),
|
|
UFTDI_DEV(FTDI, PERLE_ULTRAPORT, 0),
|
|
UFTDI_DEV(FTDI, PHI_FISCO, 0),
|
|
UFTDI_DEV(FTDI, PIEGROUP, 0),
|
|
UFTDI_DEV(FTDI, PROPOX_JTAGCABLEII, 0),
|
|
UFTDI_DEV(FTDI, R2000KU_TRUE_RNG, 0),
|
|
UFTDI_DEV(FTDI, R2X0, 0),
|
|
UFTDI_DEV(FTDI, RELAIS, 0),
|
|
UFTDI_DEV(FTDI, REU_TINY, 0),
|
|
UFTDI_DEV(FTDI, RMP200, 0),
|
|
UFTDI_DEV(FTDI, RM_CANVIEW, 0),
|
|
UFTDI_DEV(FTDI, RRCIRKITS_LOCOBUFFER, 0),
|
|
UFTDI_DEV(FTDI, SCIENCESCOPE_HS_LOGBOOK, 0),
|
|
UFTDI_DEV(FTDI, SCIENCESCOPE_LOGBOOKML, 0),
|
|
UFTDI_DEV(FTDI, SCIENCESCOPE_LS_LOGBOOK, 0),
|
|
UFTDI_DEV(FTDI, SCS_DEVICE_0, 0),
|
|
UFTDI_DEV(FTDI, SCS_DEVICE_1, 0),
|
|
UFTDI_DEV(FTDI, SCS_DEVICE_2, 0),
|
|
UFTDI_DEV(FTDI, SCS_DEVICE_3, 0),
|
|
UFTDI_DEV(FTDI, SCS_DEVICE_4, 0),
|
|
UFTDI_DEV(FTDI, SCS_DEVICE_5, 0),
|
|
UFTDI_DEV(FTDI, SCS_DEVICE_6, 0),
|
|
UFTDI_DEV(FTDI, SCS_DEVICE_7, 0),
|
|
UFTDI_DEV(FTDI, SCX8_USB_PHOENIX, 0),
|
|
UFTDI_DEV(FTDI, SDMUSBQSS, 0),
|
|
UFTDI_DEV(FTDI, SEMC_DSS20, 0),
|
|
UFTDI_DEV(FTDI, SERIAL_2232C, UFTDI_JTAG_CHECK_STRING),
|
|
UFTDI_DEV(FTDI, SERIAL_2232D, 0),
|
|
UFTDI_DEV(FTDI, SERIAL_232RL, 0),
|
|
UFTDI_DEV(FTDI, SERIAL_4232H, 0),
|
|
UFTDI_DEV(FTDI, SERIAL_8U100AX, 0),
|
|
UFTDI_DEV(FTDI, SERIAL_8U232AM, 0),
|
|
UFTDI_DEV(FTDI, SERIAL_8U232AM4, 0),
|
|
UFTDI_DEV(FTDI, SIGNALYZER_SH2, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(FTDI, SIGNALYZER_SH4, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(FTDI, SIGNALYZER_SLITE, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(FTDI, SIGNALYZER_ST, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(FTDI, SITOP_UPS500S, 0),
|
|
UFTDI_DEV(FTDI, SPECIAL_1, 0),
|
|
UFTDI_DEV(FTDI, SPECIAL_3, 0),
|
|
UFTDI_DEV(FTDI, SPECIAL_4, 0),
|
|
UFTDI_DEV(FTDI, SPROG_II, 0),
|
|
UFTDI_DEV(FTDI, SR_RADIO, 0),
|
|
UFTDI_DEV(FTDI, SUUNTO_SPORTS, 0),
|
|
UFTDI_DEV(FTDI, TACTRIX_OPENPORT_13M, 0),
|
|
UFTDI_DEV(FTDI, TACTRIX_OPENPORT_13S, 0),
|
|
UFTDI_DEV(FTDI, TACTRIX_OPENPORT_13U, 0),
|
|
UFTDI_DEV(FTDI, TAVIR_STK500, 0),
|
|
UFTDI_DEV(FTDI, TERATRONIK_D2XX, 0),
|
|
UFTDI_DEV(FTDI, TERATRONIK_VCP, 0),
|
|
UFTDI_DEV(FTDI, THORLABS, 0),
|
|
UFTDI_DEV(FTDI, TIAO, 0),
|
|
UFTDI_DEV(FTDI, TNC_X, 0),
|
|
UFTDI_DEV(FTDI, TTUSB, 0),
|
|
UFTDI_DEV(FTDI, TURTELIZER2, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(FTDI, UOPTBR, 0),
|
|
UFTDI_DEV(FTDI, USBSERIAL, 0),
|
|
UFTDI_DEV(FTDI, USBX_707, 0),
|
|
UFTDI_DEV(FTDI, USB_UIRT, 0),
|
|
UFTDI_DEV(FTDI, USINT_CAT, 0),
|
|
UFTDI_DEV(FTDI, USINT_RS232, 0),
|
|
UFTDI_DEV(FTDI, USINT_WKEY, 0),
|
|
UFTDI_DEV(FTDI, VARDAAN, 0),
|
|
UFTDI_DEV(FTDI, VNHCPCUSB_D, 0),
|
|
UFTDI_DEV(FTDI, WESTREX_MODEL_777, 0),
|
|
UFTDI_DEV(FTDI, WESTREX_MODEL_8900F, 0),
|
|
UFTDI_DEV(FTDI, XDS100V2, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(FTDI, XDS100V3, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(FTDI, XF_547, 0),
|
|
UFTDI_DEV(FTDI, XF_640, 0),
|
|
UFTDI_DEV(FTDI, XF_642, 0),
|
|
UFTDI_DEV(FTDI, XM_RADIO, 0),
|
|
UFTDI_DEV(FTDI, YEI_SERVOCENTER31, 0),
|
|
UFTDI_DEV(GNOTOMETRICS, USB, 0),
|
|
UFTDI_DEV(ICOM, SP1, 0),
|
|
UFTDI_DEV(ICOM, OPC_U_UC, 0),
|
|
UFTDI_DEV(ICOM, RP2C1, 0),
|
|
UFTDI_DEV(ICOM, RP2C2, 0),
|
|
UFTDI_DEV(ICOM, RP2D, 0),
|
|
UFTDI_DEV(ICOM, RP2KVR, 0),
|
|
UFTDI_DEV(ICOM, RP2KVT, 0),
|
|
UFTDI_DEV(ICOM, RP2VR, 0),
|
|
UFTDI_DEV(ICOM, RP2VT, 0),
|
|
UFTDI_DEV(ICOM, RP4KVR, 0),
|
|
UFTDI_DEV(ICOM, RP4KVT, 0),
|
|
UFTDI_DEV(IDTECH, IDT1221U, 0),
|
|
UFTDI_DEV(INTERBIOMETRICS, IOBOARD, 0),
|
|
UFTDI_DEV(INTERBIOMETRICS, MINI_IOBOARD, 0),
|
|
UFTDI_DEV(INTREPIDCS, NEOVI, 0),
|
|
UFTDI_DEV(INTREPIDCS, VALUECAN, 0),
|
|
UFTDI_DEV(IONICS, PLUGCOMPUTER, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(JETI, SPC1201, 0),
|
|
UFTDI_DEV(KOBIL, CONV_B1, 0),
|
|
UFTDI_DEV(KOBIL, CONV_KAAN, 0),
|
|
UFTDI_DEV(LARSENBRUSGAARD, ALTITRACK, 0),
|
|
UFTDI_DEV(MARVELL, SHEEVAPLUG, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0100, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0101, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0102, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0103, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0104, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0105, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0106, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0107, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0108, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0109, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_010A, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_010B, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_010C, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_010D, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_010E, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_010F, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0110, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0111, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0112, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0113, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0114, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0115, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0116, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0117, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0118, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0119, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_011A, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_011B, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_011C, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_011D, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_011E, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_011F, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0120, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0121, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0122, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0123, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0124, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0125, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0126, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0128, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0129, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_012A, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_012B, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_012D, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_012E, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_012F, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0130, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0131, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0132, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0133, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0134, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0135, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0136, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0137, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0138, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0139, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_013A, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_013B, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_013C, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_013D, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_013E, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_013F, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0140, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0141, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0142, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0143, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0144, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0145, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0146, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0147, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0148, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0149, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_014A, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_014B, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_014C, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_014D, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_014E, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_014F, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0150, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0151, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0152, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0159, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_015A, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_015B, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_015C, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_015D, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_015E, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_015F, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0160, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0161, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0162, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0163, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0164, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0165, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0166, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0167, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0168, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0169, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_016A, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_016B, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_016C, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_016D, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_016E, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_016F, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0170, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0171, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0172, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0173, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0174, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0175, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0176, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0177, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0178, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0179, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_017A, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_017B, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_017C, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_017D, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_017E, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_017F, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0180, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0181, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0182, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0183, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0184, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0185, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0186, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0187, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0188, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0189, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_018A, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_018B, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_018C, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_018D, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_018E, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_018F, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0190, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0191, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0192, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0193, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0194, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0195, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0196, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0197, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0198, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_0199, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_019A, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_019B, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_019C, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_019D, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_019E, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_019F, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01A0, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01A1, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01A2, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01A3, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01A4, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01A5, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01A6, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01A7, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01A8, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01A9, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01AA, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01AB, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01AC, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01AD, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01AE, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01AF, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01B0, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01B1, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01B2, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01B3, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01B4, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01B5, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01B6, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01B7, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01B8, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01B9, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01BA, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01BB, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01BC, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01BD, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01BE, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01BF, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01C0, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01C1, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01C2, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01C3, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01C4, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01C5, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01C6, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01C7, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01C8, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01C9, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01CA, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01CB, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01CC, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01CD, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01CE, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01CF, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01D0, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01D1, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01D2, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01D3, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01D4, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01D5, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01D6, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01D7, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01D8, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01D9, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01DA, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01DB, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01DC, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01DD, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01DE, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01DF, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01E0, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01E1, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01E2, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01E3, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01E4, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01E5, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01E6, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01E7, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01E8, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01E9, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01EA, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01EB, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01EC, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01ED, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01EE, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01EF, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01F0, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01F1, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01F2, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01F3, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01F4, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01F5, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01F6, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01F7, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01F8, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01F9, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01FA, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01FB, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01FC, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01FD, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01FE, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, FTDI_RANGE_01FF, 0),
|
|
UFTDI_DEV(MATRIXORBITAL, MOUA, 0),
|
|
UFTDI_DEV(MELCO, PCOPRS1, 0),
|
|
UFTDI_DEV(METAGEEK, TELLSTICK, 0),
|
|
UFTDI_DEV(MOBILITY, USB_SERIAL, 0),
|
|
UFTDI_DEV(OLIMEX, ARM_USB_OCD, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(OLIMEX, ARM_USB_OCD_H, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(OPTO, CRD7734, 0),
|
|
UFTDI_DEV(OPTO, CRD7734_1, 0),
|
|
UFTDI_DEV(PAPOUCH, AD4USB, 0),
|
|
UFTDI_DEV(PAPOUCH, AP485, 0),
|
|
UFTDI_DEV(PAPOUCH, AP485_2, 0),
|
|
UFTDI_DEV(PAPOUCH, DRAK5, 0),
|
|
UFTDI_DEV(PAPOUCH, DRAK6, 0),
|
|
UFTDI_DEV(PAPOUCH, GMSR, 0),
|
|
UFTDI_DEV(PAPOUCH, GMUX, 0),
|
|
UFTDI_DEV(PAPOUCH, IRAMP, 0),
|
|
UFTDI_DEV(PAPOUCH, LEC, 0),
|
|
UFTDI_DEV(PAPOUCH, MU, 0),
|
|
UFTDI_DEV(PAPOUCH, QUIDO10X1, 0),
|
|
UFTDI_DEV(PAPOUCH, QUIDO2X16, 0),
|
|
UFTDI_DEV(PAPOUCH, QUIDO2X2, 0),
|
|
UFTDI_DEV(PAPOUCH, QUIDO30X3, 0),
|
|
UFTDI_DEV(PAPOUCH, QUIDO3X32, 0),
|
|
UFTDI_DEV(PAPOUCH, QUIDO4X4, 0),
|
|
UFTDI_DEV(PAPOUCH, QUIDO60X3, 0),
|
|
UFTDI_DEV(PAPOUCH, QUIDO8X8, 0),
|
|
UFTDI_DEV(PAPOUCH, SB232, 0),
|
|
UFTDI_DEV(PAPOUCH, SB422, 0),
|
|
UFTDI_DEV(PAPOUCH, SB422_2, 0),
|
|
UFTDI_DEV(PAPOUCH, SB485, 0),
|
|
UFTDI_DEV(PAPOUCH, SB485C, 0),
|
|
UFTDI_DEV(PAPOUCH, SB485S, 0),
|
|
UFTDI_DEV(PAPOUCH, SB485_2, 0),
|
|
UFTDI_DEV(PAPOUCH, SIMUKEY, 0),
|
|
UFTDI_DEV(PAPOUCH, TMU, 0),
|
|
UFTDI_DEV(PAPOUCH, UPSUSB, 0),
|
|
UFTDI_DEV(POSIFLEX, PP7000, 0),
|
|
UFTDI_DEV(QIHARDWARE, JTAGSERIAL, UFTDI_JTAG_IFACE(0)),
|
|
UFTDI_DEV(RATOC, REXUSB60F, 0),
|
|
UFTDI_DEV(RTSYSTEMS, CT29B, 0),
|
|
UFTDI_DEV(RTSYSTEMS, SERIAL_VX7, 0),
|
|
UFTDI_DEV(SEALEVEL, 2101, 0),
|
|
UFTDI_DEV(SEALEVEL, 2102, 0),
|
|
UFTDI_DEV(SEALEVEL, 2103, 0),
|
|
UFTDI_DEV(SEALEVEL, 2104, 0),
|
|
UFTDI_DEV(SEALEVEL, 2106, 0),
|
|
UFTDI_DEV(SEALEVEL, 2201_1, 0),
|
|
UFTDI_DEV(SEALEVEL, 2201_2, 0),
|
|
UFTDI_DEV(SEALEVEL, 2202_1, 0),
|
|
UFTDI_DEV(SEALEVEL, 2202_2, 0),
|
|
UFTDI_DEV(SEALEVEL, 2203_1, 0),
|
|
UFTDI_DEV(SEALEVEL, 2203_2, 0),
|
|
UFTDI_DEV(SEALEVEL, 2401_1, 0),
|
|
UFTDI_DEV(SEALEVEL, 2401_2, 0),
|
|
UFTDI_DEV(SEALEVEL, 2401_3, 0),
|
|
UFTDI_DEV(SEALEVEL, 2401_4, 0),
|
|
UFTDI_DEV(SEALEVEL, 2402_1, 0),
|
|
UFTDI_DEV(SEALEVEL, 2402_2, 0),
|
|
UFTDI_DEV(SEALEVEL, 2402_3, 0),
|
|
UFTDI_DEV(SEALEVEL, 2402_4, 0),
|
|
UFTDI_DEV(SEALEVEL, 2403_1, 0),
|
|
UFTDI_DEV(SEALEVEL, 2403_2, 0),
|
|
UFTDI_DEV(SEALEVEL, 2403_3, 0),
|
|
UFTDI_DEV(SEALEVEL, 2403_4, 0),
|
|
UFTDI_DEV(SEALEVEL, 2801_1, 0),
|
|
UFTDI_DEV(SEALEVEL, 2801_2, 0),
|
|
UFTDI_DEV(SEALEVEL, 2801_3, 0),
|
|
UFTDI_DEV(SEALEVEL, 2801_4, 0),
|
|
UFTDI_DEV(SEALEVEL, 2801_5, 0),
|
|
UFTDI_DEV(SEALEVEL, 2801_6, 0),
|
|
UFTDI_DEV(SEALEVEL, 2801_7, 0),
|
|
UFTDI_DEV(SEALEVEL, 2801_8, 0),
|
|
UFTDI_DEV(SEALEVEL, 2802_1, 0),
|
|
UFTDI_DEV(SEALEVEL, 2802_2, 0),
|
|
UFTDI_DEV(SEALEVEL, 2802_3, 0),
|
|
UFTDI_DEV(SEALEVEL, 2802_4, 0),
|
|
UFTDI_DEV(SEALEVEL, 2802_5, 0),
|
|
UFTDI_DEV(SEALEVEL, 2802_6, 0),
|
|
UFTDI_DEV(SEALEVEL, 2802_7, 0),
|
|
UFTDI_DEV(SEALEVEL, 2802_8, 0),
|
|
UFTDI_DEV(SEALEVEL, 2803_1, 0),
|
|
UFTDI_DEV(SEALEVEL, 2803_2, 0),
|
|
UFTDI_DEV(SEALEVEL, 2803_3, 0),
|
|
UFTDI_DEV(SEALEVEL, 2803_4, 0),
|
|
UFTDI_DEV(SEALEVEL, 2803_5, 0),
|
|
UFTDI_DEV(SEALEVEL, 2803_6, 0),
|
|
UFTDI_DEV(SEALEVEL, 2803_7, 0),
|
|
UFTDI_DEV(SEALEVEL, 2803_8, 0),
|
|
UFTDI_DEV(SIIG2, DK201, 0),
|
|
UFTDI_DEV(SIIG2, US2308, 0),
|
|
UFTDI_DEV(TESTO, USB_INTERFACE, 0),
|
|
UFTDI_DEV(TML, USB_SERIAL, 0),
|
|
UFTDI_DEV(TTI, QL355P, 0),
|
|
UFTDI_DEV(UNKNOWN4, NF_RIC, 0),
|
|
#undef UFTDI_DEV
|
|
};
|
|
|
|
DRIVER_MODULE(uftdi, uhub, uftdi_driver, uftdi_devclass, NULL, NULL);
|
|
MODULE_DEPEND(uftdi, ucom, 1, 1, 1);
|
|
MODULE_DEPEND(uftdi, usb, 1, 1, 1);
|
|
MODULE_VERSION(uftdi, 1);
|
|
USB_PNP_HOST_INFO(uftdi_devs);
|
|
|
|
/*
|
|
* Jtag product name strings table. Some products have one or more interfaces
|
|
* dedicated to jtag or gpio, but use a product ID that's the same as other
|
|
* products which don't. They are marked with a flag in the table above, and
|
|
* the following string table is checked for flagged products. The string check
|
|
* is done with strstr(); in effect there is an implicit wildcard at the
|
|
* beginning and end of each product name string in table.
|
|
*/
|
|
static const struct jtag_by_name {
|
|
const char * product_name;
|
|
uint32_t jtag_interfaces;
|
|
} jtag_products_by_name[] = {
|
|
/* TI Beaglebone and TI XDS100Vn jtag product line. */
|
|
{"XDS100V", UFTDI_JTAG_IFACE(0)},
|
|
};
|
|
|
|
/*
|
|
* Set up a sysctl and tunable to en/disable the feature of skipping the
|
|
* creation of tty devices for jtag interfaces. Enabled by default.
|
|
*/
|
|
static int skip_jtag_interfaces = 1;
|
|
SYSCTL_INT(_hw_usb_uftdi, OID_AUTO, skip_jtag_interfaces, CTLFLAG_RWTUN,
|
|
&skip_jtag_interfaces, 1, "Skip creating tty devices for jtag interfaces");
|
|
|
|
static boolean_t
|
|
is_jtag_interface(struct usb_attach_arg *uaa, const struct usb_device_id *id)
|
|
{
|
|
int i, iface_bit;
|
|
const char * product_name;
|
|
const struct jtag_by_name *jbn;
|
|
|
|
/* We only allocate 8 flag bits for jtag interface flags. */
|
|
if (uaa->info.bIfaceIndex >= UFTDI_JTAG_IFACES_MAX)
|
|
return (0);
|
|
iface_bit = UFTDI_JTAG_IFACE(uaa->info.bIfaceIndex);
|
|
|
|
/*
|
|
* If requested, search the name strings table and use the interface
|
|
* bits from that table when the product name string matches, else use
|
|
* the jtag interface bits from the main ID table.
|
|
*/
|
|
if ((id->driver_info & UFTDI_JTAG_MASK) == UFTDI_JTAG_CHECK_STRING) {
|
|
product_name = usb_get_product(uaa->device);
|
|
for (i = 0; i < nitems(jtag_products_by_name); i++) {
|
|
jbn = &jtag_products_by_name[i];
|
|
if (strstr(product_name, jbn->product_name) != NULL &&
|
|
(jbn->jtag_interfaces & iface_bit) != 0)
|
|
return (1);
|
|
}
|
|
} else if ((id->driver_info & iface_bit) != 0)
|
|
return (1);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Set up softc fields whose value depends on the device type.
|
|
*
|
|
* Note that the 2232C and 2232D devices are the same for our purposes. In the
|
|
* silicon the difference is that the D series has CPU FIFO mode and C doesn't.
|
|
* I haven't found any way of determining the C/D difference from info provided
|
|
* by the chip other than trying to set CPU FIFO mode and having it work or not.
|
|
*
|
|
* Due to a hardware bug, a 232B chip without an eeprom reports itself as a
|
|
* 232A, but if the serial number is also zero we know it's really a 232B.
|
|
*/
|
|
static void
|
|
uftdi_devtype_setup(struct uftdi_softc *sc, struct usb_attach_arg *uaa)
|
|
{
|
|
struct usb_device_descriptor *dd;
|
|
|
|
sc->sc_bcdDevice = uaa->info.bcdDevice;
|
|
|
|
switch (uaa->info.bcdDevice) {
|
|
case 0x200:
|
|
dd = usbd_get_device_descriptor(sc->sc_udev);
|
|
if (dd->iSerialNumber == 0) {
|
|
sc->sc_devtype = DEVT_232B;
|
|
} else {
|
|
sc->sc_devtype = DEVT_232A;
|
|
}
|
|
sc->sc_ucom.sc_portno = 0;
|
|
break;
|
|
case 0x400:
|
|
sc->sc_devtype = DEVT_232B;
|
|
sc->sc_ucom.sc_portno = 0;
|
|
break;
|
|
case 0x500:
|
|
sc->sc_devtype = DEVT_2232D;
|
|
sc->sc_devflags |= DEVF_BAUDBITS_HINDEX;
|
|
sc->sc_ucom.sc_portno = FTDI_PIT_SIOA + uaa->info.bIfaceNum;
|
|
break;
|
|
case 0x600:
|
|
sc->sc_devtype = DEVT_232R;
|
|
sc->sc_ucom.sc_portno = 0;
|
|
break;
|
|
case 0x700:
|
|
sc->sc_devtype = DEVT_2232H;
|
|
sc->sc_devflags |= DEVF_BAUDBITS_HINDEX | DEVF_BAUDCLK_12M;
|
|
sc->sc_ucom.sc_portno = FTDI_PIT_SIOA + uaa->info.bIfaceNum;
|
|
break;
|
|
case 0x800:
|
|
sc->sc_devtype = DEVT_4232H;
|
|
sc->sc_devflags |= DEVF_BAUDBITS_HINDEX | DEVF_BAUDCLK_12M;
|
|
sc->sc_ucom.sc_portno = FTDI_PIT_SIOA + uaa->info.bIfaceNum;
|
|
break;
|
|
case 0x900:
|
|
sc->sc_devtype = DEVT_232H;
|
|
sc->sc_devflags |= DEVF_BAUDBITS_HINDEX | DEVF_BAUDCLK_12M;
|
|
sc->sc_ucom.sc_portno = FTDI_PIT_SIOA + uaa->info.bIfaceNum;
|
|
break;
|
|
case 0x1000:
|
|
sc->sc_devtype = DEVT_230X;
|
|
sc->sc_devflags |= DEVF_BAUDBITS_HINDEX;
|
|
sc->sc_ucom.sc_portno = FTDI_PIT_SIOA + uaa->info.bIfaceNum;
|
|
break;
|
|
default:
|
|
if (uaa->info.bcdDevice < 0x200) {
|
|
sc->sc_devtype = DEVT_SIO;
|
|
sc->sc_hdrlen = 1;
|
|
} else {
|
|
sc->sc_devtype = DEVT_232R;
|
|
device_printf(sc->sc_dev, "Warning: unknown FTDI "
|
|
"device type, bcdDevice=0x%04x, assuming 232R\n",
|
|
uaa->info.bcdDevice);
|
|
}
|
|
sc->sc_ucom.sc_portno = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int
|
|
uftdi_probe(device_t dev)
|
|
{
|
|
struct usb_attach_arg *uaa = device_get_ivars(dev);
|
|
const struct usb_device_id *id;
|
|
|
|
if (uaa->usb_mode != USB_MODE_HOST) {
|
|
return (ENXIO);
|
|
}
|
|
if (uaa->info.bConfigIndex != UFTDI_CONFIG_INDEX) {
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*
|
|
* Attach to all present interfaces unless this is a JTAG one, which
|
|
* we leave for userland.
|
|
*/
|
|
id = usbd_lookup_id_by_info(uftdi_devs, sizeof(uftdi_devs),
|
|
&uaa->info);
|
|
if (id == NULL)
|
|
return (ENXIO);
|
|
if (skip_jtag_interfaces && is_jtag_interface(uaa, id)) {
|
|
printf("%s: skipping JTAG interface #%d for '%s' at %u.%u\n",
|
|
device_get_name(dev),
|
|
uaa->info.bIfaceIndex,
|
|
usb_get_product(uaa->device),
|
|
usbd_get_bus_index(uaa->device),
|
|
usbd_get_device_index(uaa->device));
|
|
return (ENXIO);
|
|
}
|
|
uaa->driver_info = id->driver_info;
|
|
return (BUS_PROBE_SPECIFIC);
|
|
}
|
|
|
|
static int
|
|
uftdi_attach(device_t dev)
|
|
{
|
|
struct usb_attach_arg *uaa = device_get_ivars(dev);
|
|
struct uftdi_softc *sc = device_get_softc(dev);
|
|
int error;
|
|
|
|
DPRINTF("\n");
|
|
|
|
sc->sc_udev = uaa->device;
|
|
sc->sc_dev = dev;
|
|
sc->sc_unit = device_get_unit(dev);
|
|
sc->sc_bitmode = UFTDI_BITMODE_NONE;
|
|
|
|
device_set_usb_desc(dev);
|
|
mtx_init(&sc->sc_mtx, "uftdi", NULL, MTX_DEF);
|
|
ucom_ref(&sc->sc_super_ucom);
|
|
|
|
uftdi_devtype_setup(sc, uaa);
|
|
|
|
error = usbd_transfer_setup(uaa->device,
|
|
&uaa->info.bIfaceIndex, sc->sc_xfer, uftdi_config,
|
|
UFTDI_N_TRANSFER, sc, &sc->sc_mtx);
|
|
|
|
if (error) {
|
|
device_printf(dev, "allocating USB "
|
|
"transfers failed\n");
|
|
goto detach;
|
|
}
|
|
/* clear stall at first run */
|
|
mtx_lock(&sc->sc_mtx);
|
|
usbd_xfer_set_stall(sc->sc_xfer[UFTDI_BULK_DT_WR]);
|
|
usbd_xfer_set_stall(sc->sc_xfer[UFTDI_BULK_DT_RD]);
|
|
mtx_unlock(&sc->sc_mtx);
|
|
|
|
/* set a valid "lcr" value */
|
|
|
|
sc->sc_last_lcr =
|
|
(FTDI_SIO_SET_DATA_STOP_BITS_2 |
|
|
FTDI_SIO_SET_DATA_PARITY_NONE |
|
|
FTDI_SIO_SET_DATA_BITS(8));
|
|
|
|
/* Indicate tx bits in sc_lsr can be used to determine busy vs idle. */
|
|
ucom_use_lsr_txbits(&sc->sc_ucom);
|
|
|
|
error = ucom_attach(&sc->sc_super_ucom, &sc->sc_ucom, 1, sc,
|
|
&uftdi_callback, &sc->sc_mtx);
|
|
if (error) {
|
|
goto detach;
|
|
}
|
|
ucom_set_pnpinfo_usb(&sc->sc_super_ucom, dev);
|
|
|
|
return (0); /* success */
|
|
|
|
detach:
|
|
uftdi_detach(dev);
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
uftdi_detach(device_t dev)
|
|
{
|
|
struct uftdi_softc *sc = device_get_softc(dev);
|
|
|
|
ucom_detach(&sc->sc_super_ucom, &sc->sc_ucom);
|
|
usbd_transfer_unsetup(sc->sc_xfer, UFTDI_N_TRANSFER);
|
|
|
|
device_claim_softc(dev);
|
|
|
|
uftdi_free_softc(sc);
|
|
|
|
return (0);
|
|
}
|
|
|
|
UCOM_UNLOAD_DRAIN(uftdi);
|
|
|
|
static void
|
|
uftdi_free_softc(struct uftdi_softc *sc)
|
|
{
|
|
if (ucom_unref(&sc->sc_super_ucom)) {
|
|
mtx_destroy(&sc->sc_mtx);
|
|
device_free_softc(sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
uftdi_free(struct ucom_softc *ucom)
|
|
{
|
|
uftdi_free_softc(ucom->sc_parent);
|
|
}
|
|
|
|
static void
|
|
uftdi_cfg_open(struct ucom_softc *ucom)
|
|
{
|
|
|
|
/*
|
|
* This do-nothing open routine exists for the sole purpose of this
|
|
* DPRINTF() so that you can see the point at which open gets called
|
|
* when debugging is enabled.
|
|
*/
|
|
DPRINTF("\n");
|
|
}
|
|
|
|
static void
|
|
uftdi_cfg_close(struct ucom_softc *ucom)
|
|
{
|
|
|
|
/*
|
|
* This do-nothing close routine exists for the sole purpose of this
|
|
* DPRINTF() so that you can see the point at which close gets called
|
|
* when debugging is enabled.
|
|
*/
|
|
DPRINTF("\n");
|
|
}
|
|
|
|
static void
|
|
uftdi_write_callback(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
struct uftdi_softc *sc = usbd_xfer_softc(xfer);
|
|
struct usb_page_cache *pc;
|
|
uint32_t pktlen;
|
|
uint32_t buflen;
|
|
uint8_t buf[1];
|
|
|
|
DPRINTFN(3, "\n");
|
|
|
|
switch (USB_GET_STATE(xfer)) {
|
|
default: /* Error */
|
|
if (error != USB_ERR_CANCELLED) {
|
|
/* try to clear stall first */
|
|
usbd_xfer_set_stall(xfer);
|
|
}
|
|
/* FALLTHROUGH */
|
|
case USB_ST_SETUP:
|
|
case USB_ST_TRANSFERRED:
|
|
/*
|
|
* If output packets don't require headers (the common case) we
|
|
* can just load the buffer up with payload bytes all at once.
|
|
* Otherwise, loop to format packets into the buffer while there
|
|
* is data available, and room for a packet header and at least
|
|
* one byte of payload.
|
|
*
|
|
* NOTE: The FTDI chip doesn't accept zero length
|
|
* packets. This cannot happen because the "pktlen"
|
|
* will always be non-zero when "ucom_get_data()"
|
|
* returns non-zero which we check below.
|
|
*/
|
|
pc = usbd_xfer_get_frame(xfer, 0);
|
|
if (sc->sc_hdrlen == 0) {
|
|
if (ucom_get_data(&sc->sc_ucom, pc, 0, UFTDI_OBUFSIZE,
|
|
&buflen) == 0)
|
|
break;
|
|
} else {
|
|
buflen = 0;
|
|
while (buflen < UFTDI_OBUFSIZE - sc->sc_hdrlen - 1 &&
|
|
ucom_get_data(&sc->sc_ucom, pc, buflen +
|
|
sc->sc_hdrlen, UFTDI_OPKTSIZE - sc->sc_hdrlen,
|
|
&pktlen) != 0) {
|
|
buf[0] = FTDI_OUT_TAG(pktlen,
|
|
sc->sc_ucom.sc_portno);
|
|
usbd_copy_in(pc, buflen, buf, 1);
|
|
buflen += pktlen + sc->sc_hdrlen;
|
|
}
|
|
}
|
|
if (buflen != 0) {
|
|
usbd_xfer_set_frame_len(xfer, 0, buflen);
|
|
usbd_transfer_submit(xfer);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
uftdi_read_callback(struct usb_xfer *xfer, usb_error_t error)
|
|
{
|
|
struct uftdi_softc *sc = usbd_xfer_softc(xfer);
|
|
struct usb_page_cache *pc;
|
|
uint8_t buf[2];
|
|
uint8_t ftdi_msr;
|
|
uint8_t msr;
|
|
uint8_t lsr;
|
|
int buflen;
|
|
int pktlen;
|
|
int pktmax;
|
|
int offset;
|
|
|
|
DPRINTFN(3, "\n");
|
|
|
|
usbd_xfer_status(xfer, &buflen, NULL, NULL, NULL);
|
|
|
|
switch (USB_GET_STATE(xfer)) {
|
|
case USB_ST_TRANSFERRED:
|
|
if (buflen < UFTDI_IHDRSIZE)
|
|
goto tr_setup;
|
|
pc = usbd_xfer_get_frame(xfer, 0);
|
|
pktmax = xfer->max_packet_size - UFTDI_IHDRSIZE;
|
|
lsr = 0;
|
|
msr = 0;
|
|
offset = 0;
|
|
/*
|
|
* Extract packet headers and payload bytes from the buffer.
|
|
* Feed payload bytes to ucom/tty layer; OR-accumulate the
|
|
* receiver-related header status bits which are transient and
|
|
* could toggle with each packet, but for transmitter-related
|
|
* bits keep only the ones from the last packet.
|
|
*
|
|
* After processing all packets in the buffer, process the
|
|
* accumulated transient MSR and LSR values along with the
|
|
* non-transient bits from the last packet header.
|
|
*/
|
|
while (buflen >= UFTDI_IHDRSIZE) {
|
|
usbd_copy_out(pc, offset, buf, UFTDI_IHDRSIZE);
|
|
offset += UFTDI_IHDRSIZE;
|
|
buflen -= UFTDI_IHDRSIZE;
|
|
lsr &= ~(ULSR_TXRDY | ULSR_TSRE);
|
|
lsr |= FTDI_GET_LSR(buf);
|
|
if (FTDI_GET_MSR(buf) & FTDI_SIO_RI_MASK)
|
|
msr |= SER_RI;
|
|
pktlen = min(buflen, pktmax);
|
|
if (pktlen != 0) {
|
|
ucom_put_data(&sc->sc_ucom, pc, offset,
|
|
pktlen);
|
|
offset += pktlen;
|
|
buflen -= pktlen;
|
|
}
|
|
}
|
|
ftdi_msr = FTDI_GET_MSR(buf);
|
|
|
|
if (ftdi_msr & FTDI_SIO_CTS_MASK)
|
|
msr |= SER_CTS;
|
|
if (ftdi_msr & FTDI_SIO_DSR_MASK)
|
|
msr |= SER_DSR;
|
|
if (ftdi_msr & FTDI_SIO_RI_MASK)
|
|
msr |= SER_RI;
|
|
if (ftdi_msr & FTDI_SIO_RLSD_MASK)
|
|
msr |= SER_DCD;
|
|
|
|
if (sc->sc_msr != msr || sc->sc_lsr != lsr) {
|
|
DPRINTF("status change msr=0x%02x (0x%02x) "
|
|
"lsr=0x%02x (0x%02x)\n", msr, sc->sc_msr,
|
|
lsr, sc->sc_lsr);
|
|
|
|
sc->sc_msr = msr;
|
|
sc->sc_lsr = lsr;
|
|
|
|
ucom_status_change(&sc->sc_ucom);
|
|
}
|
|
/* FALLTHROUGH */
|
|
case USB_ST_SETUP:
|
|
tr_setup:
|
|
usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
|
|
usbd_transfer_submit(xfer);
|
|
return;
|
|
|
|
default: /* Error */
|
|
if (error != USB_ERR_CANCELLED) {
|
|
/* try to clear stall first */
|
|
usbd_xfer_set_stall(xfer);
|
|
goto tr_setup;
|
|
}
|
|
return;
|
|
}
|
|
}
|
|
|
|
static void
|
|
uftdi_cfg_set_dtr(struct ucom_softc *ucom, uint8_t onoff)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
uint16_t wIndex = ucom->sc_portno;
|
|
uint16_t wValue;
|
|
struct usb_device_request req;
|
|
|
|
DPRINTFN(2, "DTR=%u\n", onoff);
|
|
|
|
wValue = onoff ? FTDI_SIO_SET_DTR_HIGH : FTDI_SIO_SET_DTR_LOW;
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = FTDI_SIO_MODEM_CTRL;
|
|
USETW(req.wValue, wValue);
|
|
USETW(req.wIndex, wIndex);
|
|
USETW(req.wLength, 0);
|
|
ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
|
|
&req, NULL, 0, 1000);
|
|
}
|
|
|
|
static void
|
|
uftdi_cfg_set_rts(struct ucom_softc *ucom, uint8_t onoff)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
uint16_t wIndex = ucom->sc_portno;
|
|
uint16_t wValue;
|
|
struct usb_device_request req;
|
|
|
|
DPRINTFN(2, "RTS=%u\n", onoff);
|
|
|
|
wValue = onoff ? FTDI_SIO_SET_RTS_HIGH : FTDI_SIO_SET_RTS_LOW;
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = FTDI_SIO_MODEM_CTRL;
|
|
USETW(req.wValue, wValue);
|
|
USETW(req.wIndex, wIndex);
|
|
USETW(req.wLength, 0);
|
|
ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
|
|
&req, NULL, 0, 1000);
|
|
}
|
|
|
|
static void
|
|
uftdi_cfg_set_break(struct ucom_softc *ucom, uint8_t onoff)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
uint16_t wIndex = ucom->sc_portno;
|
|
uint16_t wValue;
|
|
struct usb_device_request req;
|
|
|
|
DPRINTFN(2, "BREAK=%u\n", onoff);
|
|
|
|
if (onoff) {
|
|
sc->sc_last_lcr |= FTDI_SIO_SET_BREAK;
|
|
} else {
|
|
sc->sc_last_lcr &= ~FTDI_SIO_SET_BREAK;
|
|
}
|
|
|
|
wValue = sc->sc_last_lcr;
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = FTDI_SIO_SET_DATA;
|
|
USETW(req.wValue, wValue);
|
|
USETW(req.wIndex, wIndex);
|
|
USETW(req.wLength, 0);
|
|
ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
|
|
&req, NULL, 0, 1000);
|
|
}
|
|
|
|
/*
|
|
* Return true if the given speed is within operational tolerance of the target
|
|
* speed. FTDI recommends that the hardware speed be within 3% of nominal.
|
|
*/
|
|
static inline boolean_t
|
|
uftdi_baud_within_tolerance(uint64_t speed, uint64_t target)
|
|
{
|
|
return ((speed >= (target * 100) / 103) &&
|
|
(speed <= (target * 100) / 97));
|
|
}
|
|
|
|
static int
|
|
uftdi_sio_encode_baudrate(struct uftdi_softc *sc, speed_t speed,
|
|
struct uftdi_param_config *cfg)
|
|
{
|
|
u_int i;
|
|
const speed_t sio_speeds[] = {
|
|
300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200
|
|
};
|
|
|
|
/*
|
|
* The original SIO chips were limited to a small choice of speeds
|
|
* listed in an internal table of speeds chosen by an index value.
|
|
*/
|
|
for (i = 0; i < nitems(sio_speeds); ++i) {
|
|
if (speed == sio_speeds[i]) {
|
|
cfg->baud_lobits = i;
|
|
cfg->baud_hibits = 0;
|
|
return (0);
|
|
}
|
|
}
|
|
return (ERANGE);
|
|
}
|
|
|
|
static int
|
|
uftdi_encode_baudrate(struct uftdi_softc *sc, speed_t speed,
|
|
struct uftdi_param_config *cfg)
|
|
{
|
|
static const uint8_t encoded_fraction[8] = {0, 3, 2, 4, 1, 5, 6, 7};
|
|
static const uint8_t roundoff_232a[16] = {
|
|
0, 1, 0, 1, 0, -1, 2, 1,
|
|
0, -1, -2, -3, 4, 3, 2, 1,
|
|
};
|
|
uint32_t clk, divisor, fastclk_flag, frac, hwspeed;
|
|
|
|
/*
|
|
* If this chip has the fast clock capability and the speed is within
|
|
* range, use the 12MHz clock, otherwise the standard clock is 3MHz.
|
|
*/
|
|
if ((sc->sc_devflags & DEVF_BAUDCLK_12M) && speed >= 1200) {
|
|
clk = 12000000;
|
|
fastclk_flag = (1 << 17);
|
|
} else {
|
|
clk = 3000000;
|
|
fastclk_flag = 0;
|
|
}
|
|
|
|
/*
|
|
* Make sure the requested speed is reachable with the available clock
|
|
* and a 14-bit divisor.
|
|
*/
|
|
if (speed < (clk >> 14) || speed > clk)
|
|
return (ERANGE);
|
|
|
|
/*
|
|
* Calculate the divisor, initially yielding a fixed point number with a
|
|
* 4-bit (1/16ths) fraction, then round it to the nearest fraction the
|
|
* hardware can handle. When the integral part of the divisor is
|
|
* greater than one, the fractional part is in 1/8ths of the base clock.
|
|
* The FT8U232AM chips can handle only 0.125, 0.250, and 0.5 fractions.
|
|
* Later chips can handle all 1/8th fractions.
|
|
*
|
|
* If the integral part of the divisor is 1, a special rule applies: the
|
|
* fractional part can only be .0 or .5 (this is a limitation of the
|
|
* hardware). We handle this by truncating the fraction rather than
|
|
* rounding, because this only applies to the two fastest speeds the
|
|
* chip can achieve and rounding doesn't matter, either you've asked for
|
|
* that exact speed or you've asked for something the chip can't do.
|
|
*
|
|
* For the FT8U232AM chips, use a roundoff table to adjust the result
|
|
* to the nearest 1/8th fraction that is supported by the hardware,
|
|
* leaving a fixed-point number with a 3-bit fraction which exactly
|
|
* represents the math the hardware divider will do. For later-series
|
|
* chips that support all 8 fractional divisors, just round 16ths to
|
|
* 8ths by adding 1 and dividing by 2.
|
|
*/
|
|
divisor = (clk << 4) / speed;
|
|
if ((divisor & 0xf) == 1)
|
|
divisor &= 0xfffffff8;
|
|
else if (sc->sc_devtype == DEVT_232A)
|
|
divisor += roundoff_232a[divisor & 0x0f];
|
|
else
|
|
divisor += 1; /* Rounds odd 16ths up to next 8th. */
|
|
divisor >>= 1;
|
|
|
|
/*
|
|
* Ensure the resulting hardware speed will be within operational
|
|
* tolerance (within 3% of nominal).
|
|
*/
|
|
hwspeed = (clk << 3) / divisor;
|
|
if (!uftdi_baud_within_tolerance(hwspeed, speed))
|
|
return (ERANGE);
|
|
|
|
/*
|
|
* Re-pack the divisor into hardware format. The lower 14-bits hold the
|
|
* integral part, while the upper bits specify the fraction by indexing
|
|
* a table of fractions within the hardware which is laid out as:
|
|
* {0.0, 0.5, 0.25, 0.125, 0.325, 0.625, 0.725, 0.875}
|
|
* The A-series chips only have the first four table entries; the
|
|
* roundoff table logic above ensures that the fractional part for those
|
|
* chips will be one of the first four values.
|
|
*
|
|
* When the divisor is 1 a special encoding applies: 1.0 is encoded as
|
|
* 0.0, and 1.5 is encoded as 1.0. The rounding logic above has already
|
|
* ensured that the fraction is either .0 or .5 if the integral is 1.
|
|
*/
|
|
frac = divisor & 0x07;
|
|
divisor >>= 3;
|
|
if (divisor == 1) {
|
|
if (frac == 0)
|
|
divisor = 0; /* 1.0 becomes 0.0 */
|
|
else
|
|
frac = 0; /* 1.5 becomes 1.0 */
|
|
}
|
|
divisor |= (encoded_fraction[frac] << 14) | fastclk_flag;
|
|
|
|
cfg->baud_lobits = (uint16_t)divisor;
|
|
cfg->baud_hibits = (uint16_t)(divisor >> 16);
|
|
|
|
/*
|
|
* If this chip requires the baud bits to be in the high byte of the
|
|
* index word, move the bits up to that location.
|
|
*/
|
|
if (sc->sc_devflags & DEVF_BAUDBITS_HINDEX) {
|
|
cfg->baud_hibits <<= 8;
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
uftdi_set_parm_soft(struct ucom_softc *ucom, struct termios *t,
|
|
struct uftdi_param_config *cfg)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
int err;
|
|
|
|
memset(cfg, 0, sizeof(*cfg));
|
|
|
|
if (sc->sc_devtype == DEVT_SIO)
|
|
err = uftdi_sio_encode_baudrate(sc, t->c_ospeed, cfg);
|
|
else
|
|
err = uftdi_encode_baudrate(sc, t->c_ospeed, cfg);
|
|
if (err != 0)
|
|
return (err);
|
|
|
|
if (t->c_cflag & CSTOPB)
|
|
cfg->lcr = FTDI_SIO_SET_DATA_STOP_BITS_2;
|
|
else
|
|
cfg->lcr = FTDI_SIO_SET_DATA_STOP_BITS_1;
|
|
|
|
if (t->c_cflag & PARENB) {
|
|
if (t->c_cflag & PARODD) {
|
|
cfg->lcr |= FTDI_SIO_SET_DATA_PARITY_ODD;
|
|
} else {
|
|
cfg->lcr |= FTDI_SIO_SET_DATA_PARITY_EVEN;
|
|
}
|
|
} else {
|
|
cfg->lcr |= FTDI_SIO_SET_DATA_PARITY_NONE;
|
|
}
|
|
|
|
switch (t->c_cflag & CSIZE) {
|
|
case CS5:
|
|
cfg->lcr |= FTDI_SIO_SET_DATA_BITS(5);
|
|
break;
|
|
|
|
case CS6:
|
|
cfg->lcr |= FTDI_SIO_SET_DATA_BITS(6);
|
|
break;
|
|
|
|
case CS7:
|
|
cfg->lcr |= FTDI_SIO_SET_DATA_BITS(7);
|
|
break;
|
|
|
|
case CS8:
|
|
cfg->lcr |= FTDI_SIO_SET_DATA_BITS(8);
|
|
break;
|
|
}
|
|
|
|
if (t->c_cflag & CRTSCTS) {
|
|
cfg->v_flow = FTDI_SIO_RTS_CTS_HS;
|
|
} else if (t->c_iflag & (IXON | IXOFF)) {
|
|
cfg->v_flow = FTDI_SIO_XON_XOFF_HS;
|
|
cfg->v_start = t->c_cc[VSTART];
|
|
cfg->v_stop = t->c_cc[VSTOP];
|
|
} else {
|
|
cfg->v_flow = FTDI_SIO_DISABLE_FLOW_CTRL;
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
uftdi_pre_param(struct ucom_softc *ucom, struct termios *t)
|
|
{
|
|
struct uftdi_param_config cfg;
|
|
|
|
DPRINTF("\n");
|
|
|
|
return (uftdi_set_parm_soft(ucom, t, &cfg));
|
|
}
|
|
|
|
static void
|
|
uftdi_cfg_param(struct ucom_softc *ucom, struct termios *t)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
uint16_t wIndex = ucom->sc_portno;
|
|
struct uftdi_param_config cfg;
|
|
struct usb_device_request req;
|
|
|
|
DPRINTF("\n");
|
|
|
|
if (uftdi_set_parm_soft(ucom, t, &cfg)) {
|
|
/* should not happen */
|
|
return;
|
|
}
|
|
sc->sc_last_lcr = cfg.lcr;
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = FTDI_SIO_SET_BAUD_RATE;
|
|
USETW(req.wValue, cfg.baud_lobits);
|
|
USETW(req.wIndex, cfg.baud_hibits | wIndex);
|
|
USETW(req.wLength, 0);
|
|
ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
|
|
&req, NULL, 0, 1000);
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = FTDI_SIO_SET_DATA;
|
|
USETW(req.wValue, cfg.lcr);
|
|
USETW(req.wIndex, wIndex);
|
|
USETW(req.wLength, 0);
|
|
ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
|
|
&req, NULL, 0, 1000);
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = FTDI_SIO_SET_FLOW_CTRL;
|
|
USETW2(req.wValue, cfg.v_stop, cfg.v_start);
|
|
USETW2(req.wIndex, cfg.v_flow, wIndex);
|
|
USETW(req.wLength, 0);
|
|
ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
|
|
&req, NULL, 0, 1000);
|
|
}
|
|
|
|
static void
|
|
uftdi_cfg_get_status(struct ucom_softc *ucom, uint8_t *lsr, uint8_t *msr)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
|
|
DPRINTFN(3, "msr=0x%02x lsr=0x%02x\n", sc->sc_msr, sc->sc_lsr);
|
|
|
|
*msr = sc->sc_msr;
|
|
*lsr = sc->sc_lsr;
|
|
}
|
|
|
|
static int
|
|
uftdi_reset(struct ucom_softc *ucom, int reset_type)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
usb_device_request_t req;
|
|
|
|
DPRINTFN(2, "\n");
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = FTDI_SIO_RESET;
|
|
|
|
USETW(req.wIndex, sc->sc_ucom.sc_portno);
|
|
USETW(req.wLength, 0);
|
|
USETW(req.wValue, reset_type);
|
|
|
|
return (usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, NULL));
|
|
}
|
|
|
|
static int
|
|
uftdi_set_bitmode(struct ucom_softc *ucom, uint8_t bitmode, uint8_t iomask)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
usb_device_request_t req;
|
|
int rv;
|
|
|
|
DPRINTFN(2, "\n");
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = FTDI_SIO_SET_BITMODE;
|
|
|
|
USETW(req.wIndex, sc->sc_ucom.sc_portno);
|
|
USETW(req.wLength, 0);
|
|
|
|
if (bitmode == UFTDI_BITMODE_NONE)
|
|
USETW2(req.wValue, 0, 0);
|
|
else
|
|
USETW2(req.wValue, (1 << bitmode), iomask);
|
|
|
|
rv = usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, NULL);
|
|
if (rv == USB_ERR_NORMAL_COMPLETION)
|
|
sc->sc_bitmode = bitmode;
|
|
|
|
return (rv);
|
|
}
|
|
|
|
static int
|
|
uftdi_get_bitmode(struct ucom_softc *ucom, uint8_t *bitmode, uint8_t *iomask)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
usb_device_request_t req;
|
|
|
|
DPRINTFN(2, "\n");
|
|
|
|
req.bmRequestType = UT_READ_VENDOR_DEVICE;
|
|
req.bRequest = FTDI_SIO_GET_BITMODE;
|
|
|
|
USETW(req.wIndex, sc->sc_ucom.sc_portno);
|
|
USETW(req.wLength, 1);
|
|
USETW(req.wValue, 0);
|
|
|
|
*bitmode = sc->sc_bitmode;
|
|
return (usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, iomask));
|
|
}
|
|
|
|
static int
|
|
uftdi_set_latency(struct ucom_softc *ucom, int latency)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
usb_device_request_t req;
|
|
|
|
DPRINTFN(2, "\n");
|
|
|
|
if (latency < 0 || latency > 255)
|
|
return (USB_ERR_INVAL);
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = FTDI_SIO_SET_LATENCY;
|
|
|
|
USETW(req.wIndex, sc->sc_ucom.sc_portno);
|
|
USETW(req.wLength, 0);
|
|
USETW2(req.wValue, 0, latency);
|
|
|
|
return (usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, NULL));
|
|
}
|
|
|
|
static int
|
|
uftdi_get_latency(struct ucom_softc *ucom, int *latency)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
usb_device_request_t req;
|
|
usb_error_t err;
|
|
uint8_t buf;
|
|
|
|
DPRINTFN(2, "\n");
|
|
|
|
req.bmRequestType = UT_READ_VENDOR_DEVICE;
|
|
req.bRequest = FTDI_SIO_GET_LATENCY;
|
|
|
|
USETW(req.wIndex, sc->sc_ucom.sc_portno);
|
|
USETW(req.wLength, 1);
|
|
USETW(req.wValue, 0);
|
|
|
|
err = usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, &buf);
|
|
*latency = buf;
|
|
|
|
return (err);
|
|
}
|
|
|
|
static int
|
|
uftdi_set_event_char(struct ucom_softc *ucom, int echar)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
usb_device_request_t req;
|
|
uint8_t enable;
|
|
|
|
DPRINTFN(2, "\n");
|
|
|
|
enable = (echar == -1) ? 0 : 1;
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = FTDI_SIO_SET_EVENT_CHAR;
|
|
|
|
USETW(req.wIndex, sc->sc_ucom.sc_portno);
|
|
USETW(req.wLength, 0);
|
|
USETW2(req.wValue, enable, echar & 0xff);
|
|
|
|
return (usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, NULL));
|
|
}
|
|
|
|
static int
|
|
uftdi_set_error_char(struct ucom_softc *ucom, int echar)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
usb_device_request_t req;
|
|
uint8_t enable;
|
|
|
|
DPRINTFN(2, "\n");
|
|
|
|
enable = (echar == -1) ? 0 : 1;
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = FTDI_SIO_SET_ERROR_CHAR;
|
|
|
|
USETW(req.wIndex, sc->sc_ucom.sc_portno);
|
|
USETW(req.wLength, 0);
|
|
USETW2(req.wValue, enable, echar & 0xff);
|
|
|
|
return (usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, NULL));
|
|
}
|
|
|
|
static int
|
|
uftdi_read_eeprom(struct ucom_softc *ucom, struct uftdi_eeio *eeio)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
usb_device_request_t req;
|
|
usb_error_t err;
|
|
uint16_t widx, wlength, woffset;
|
|
|
|
DPRINTFN(3, "\n");
|
|
|
|
/* Offset and length must both be evenly divisible by two. */
|
|
if ((eeio->offset | eeio->length) & 0x01)
|
|
return (EINVAL);
|
|
|
|
woffset = eeio->offset / 2U;
|
|
wlength = eeio->length / 2U;
|
|
for (widx = 0; widx < wlength; widx++) {
|
|
req.bmRequestType = UT_READ_VENDOR_DEVICE;
|
|
req.bRequest = FTDI_SIO_READ_EEPROM;
|
|
USETW(req.wIndex, widx + woffset);
|
|
USETW(req.wLength, 2);
|
|
USETW(req.wValue, 0);
|
|
err = usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req,
|
|
&eeio->data[widx]);
|
|
if (err != USB_ERR_NORMAL_COMPLETION)
|
|
return (err);
|
|
}
|
|
return (USB_ERR_NORMAL_COMPLETION);
|
|
}
|
|
|
|
static int
|
|
uftdi_write_eeprom(struct ucom_softc *ucom, struct uftdi_eeio *eeio)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
usb_device_request_t req;
|
|
usb_error_t err;
|
|
uint16_t widx, wlength, woffset;
|
|
|
|
DPRINTFN(3, "\n");
|
|
|
|
/* Offset and length must both be evenly divisible by two. */
|
|
if ((eeio->offset | eeio->length) & 0x01)
|
|
return (EINVAL);
|
|
|
|
woffset = eeio->offset / 2U;
|
|
wlength = eeio->length / 2U;
|
|
for (widx = 0; widx < wlength; widx++) {
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = FTDI_SIO_WRITE_EEPROM;
|
|
USETW(req.wIndex, widx + woffset);
|
|
USETW(req.wLength, 0);
|
|
USETW(req.wValue, eeio->data[widx]);
|
|
err = usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, NULL);
|
|
if (err != USB_ERR_NORMAL_COMPLETION)
|
|
return (err);
|
|
}
|
|
return (USB_ERR_NORMAL_COMPLETION);
|
|
}
|
|
|
|
static int
|
|
uftdi_erase_eeprom(struct ucom_softc *ucom, int confirmation)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
usb_device_request_t req;
|
|
usb_error_t err;
|
|
|
|
DPRINTFN(2, "\n");
|
|
|
|
/* Small effort to prevent accidental erasure. */
|
|
if (confirmation != UFTDI_CONFIRM_ERASE)
|
|
return (EINVAL);
|
|
|
|
req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
|
|
req.bRequest = FTDI_SIO_ERASE_EEPROM;
|
|
USETW(req.wIndex, 0);
|
|
USETW(req.wLength, 0);
|
|
USETW(req.wValue, 0);
|
|
err = usbd_do_request(sc->sc_udev, &sc->sc_mtx, &req, NULL);
|
|
|
|
return (err);
|
|
}
|
|
|
|
static int
|
|
uftdi_ioctl(struct ucom_softc *ucom, uint32_t cmd, caddr_t data,
|
|
int flag, struct thread *td)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
int err;
|
|
struct uftdi_bitmode * mode;
|
|
|
|
switch (cmd) {
|
|
case UFTDIIOC_RESET_IO:
|
|
case UFTDIIOC_RESET_RX:
|
|
case UFTDIIOC_RESET_TX:
|
|
err = uftdi_reset(ucom,
|
|
cmd == UFTDIIOC_RESET_IO ? FTDI_SIO_RESET_SIO :
|
|
(cmd == UFTDIIOC_RESET_RX ? FTDI_SIO_RESET_PURGE_RX :
|
|
FTDI_SIO_RESET_PURGE_TX));
|
|
break;
|
|
case UFTDIIOC_SET_BITMODE:
|
|
mode = (struct uftdi_bitmode *)data;
|
|
err = uftdi_set_bitmode(ucom, mode->mode, mode->iomask);
|
|
break;
|
|
case UFTDIIOC_GET_BITMODE:
|
|
mode = (struct uftdi_bitmode *)data;
|
|
err = uftdi_get_bitmode(ucom, &mode->mode, &mode->iomask);
|
|
break;
|
|
case UFTDIIOC_SET_LATENCY:
|
|
err = uftdi_set_latency(ucom, *((int *)data));
|
|
break;
|
|
case UFTDIIOC_GET_LATENCY:
|
|
err = uftdi_get_latency(ucom, (int *)data);
|
|
break;
|
|
case UFTDIIOC_SET_ERROR_CHAR:
|
|
err = uftdi_set_error_char(ucom, *(int *)data);
|
|
break;
|
|
case UFTDIIOC_SET_EVENT_CHAR:
|
|
err = uftdi_set_event_char(ucom, *(int *)data);
|
|
break;
|
|
case UFTDIIOC_GET_HWREV:
|
|
*(int *)data = sc->sc_bcdDevice;
|
|
err = 0;
|
|
break;
|
|
case UFTDIIOC_READ_EEPROM:
|
|
err = uftdi_read_eeprom(ucom, (struct uftdi_eeio *)data);
|
|
break;
|
|
case UFTDIIOC_WRITE_EEPROM:
|
|
err = uftdi_write_eeprom(ucom, (struct uftdi_eeio *)data);
|
|
break;
|
|
case UFTDIIOC_ERASE_EEPROM:
|
|
err = uftdi_erase_eeprom(ucom, *(int *)data);
|
|
break;
|
|
default:
|
|
return (ENOIOCTL);
|
|
}
|
|
if (err != USB_ERR_NORMAL_COMPLETION)
|
|
return (EIO);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
uftdi_start_read(struct ucom_softc *ucom)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
|
|
usbd_transfer_start(sc->sc_xfer[UFTDI_BULK_DT_RD]);
|
|
}
|
|
|
|
static void
|
|
uftdi_stop_read(struct ucom_softc *ucom)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
|
|
usbd_transfer_stop(sc->sc_xfer[UFTDI_BULK_DT_RD]);
|
|
}
|
|
|
|
static void
|
|
uftdi_start_write(struct ucom_softc *ucom)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
|
|
usbd_transfer_start(sc->sc_xfer[UFTDI_BULK_DT_WR]);
|
|
}
|
|
|
|
static void
|
|
uftdi_stop_write(struct ucom_softc *ucom)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
|
|
usbd_transfer_stop(sc->sc_xfer[UFTDI_BULK_DT_WR]);
|
|
}
|
|
|
|
static void
|
|
uftdi_poll(struct ucom_softc *ucom)
|
|
{
|
|
struct uftdi_softc *sc = ucom->sc_parent;
|
|
|
|
usbd_transfer_poll(sc->sc_xfer, UFTDI_N_TRANSFER);
|
|
}
|