freebsd-dev/sys/sparc64/sbus/sbus.c
Oleksandr Tymoshenko 217d17bcd3 Clean up OF_getprop_alloc API
OF_getprop_alloc takes element size argument and returns number of
elements in the property. There are valid use cases for such behavior
but mostly API consumers pass 1 as element size to get string
properties. What API users would expect from OF_getprop_alloc is to be
a combination of malloc + OF_getprop with the same semantic of return
value. This patch modifies API signature to match these expectations.

For the valid use cases with element size != 1 and to reduce
modification scope new OF_getprop_alloc_multi function has been
introduced that behaves the same way OF_getprop_alloc behaved prior to
this patch.

Reviewed by:	ian, manu
Differential Revision:	https://reviews.freebsd.org/D14850
2018-04-08 22:59:34 +00:00

939 lines
26 KiB
C

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (c) 1999-2002 Eduardo Horvath
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: NetBSD: sbus.c,v 1.50 2002/06/20 18:26:24 eeh Exp
*/
/*-
* Copyright (c) 2002 by Thomas Moestl <tmm@FreeBSD.org>.
* Copyright (c) 2005 Marius Strobl <marius@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* SBus support.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/pcpu.h>
#include <sys/queue.h>
#include <sys/reboot.h>
#include <sys/rman.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/ofw/openfirm.h>
#include <machine/bus.h>
#include <machine/bus_common.h>
#include <machine/bus_private.h>
#include <machine/iommureg.h>
#include <machine/iommuvar.h>
#include <machine/resource.h>
#include <sparc64/sbus/ofw_sbus.h>
#include <sparc64/sbus/sbusreg.h>
#include <sparc64/sbus/sbusvar.h>
struct sbus_devinfo {
int sdi_burstsz;
int sdi_clockfreq;
int sdi_slot;
struct ofw_bus_devinfo sdi_obdinfo;
struct resource_list sdi_rl;
};
/* Range descriptor, allocated for each sc_range. */
struct sbus_rd {
bus_addr_t rd_poffset;
bus_addr_t rd_pend;
int rd_slot;
bus_addr_t rd_coffset;
bus_addr_t rd_cend;
struct rman rd_rman;
bus_space_handle_t rd_bushandle;
struct resource *rd_res;
};
struct sbus_softc {
device_t sc_dev;
bus_dma_tag_t sc_cdmatag;
int sc_clockfreq; /* clock frequency (in Hz) */
int sc_nrange;
struct sbus_rd *sc_rd;
int sc_burst; /* burst transfer sizes supp. */
struct resource *sc_sysio_res;
int sc_ign; /* IGN for this sysio */
struct iommu_state sc_is; /* IOMMU state (iommuvar.h) */
struct resource *sc_ot_ires;
void *sc_ot_ihand;
struct resource *sc_pf_ires;
void *sc_pf_ihand;
};
#define SYSIO_READ8(sc, off) \
bus_read_8((sc)->sc_sysio_res, (off))
#define SYSIO_WRITE8(sc, off, v) \
bus_write_8((sc)->sc_sysio_res, (off), (v))
static device_probe_t sbus_probe;
static device_attach_t sbus_attach;
static bus_print_child_t sbus_print_child;
static bus_probe_nomatch_t sbus_probe_nomatch;
static bus_read_ivar_t sbus_read_ivar;
static bus_get_resource_list_t sbus_get_resource_list;
static bus_setup_intr_t sbus_setup_intr;
static bus_alloc_resource_t sbus_alloc_resource;
static bus_activate_resource_t sbus_activate_resource;
static bus_adjust_resource_t sbus_adjust_resource;
static bus_release_resource_t sbus_release_resource;
static bus_get_dma_tag_t sbus_get_dma_tag;
static ofw_bus_get_devinfo_t sbus_get_devinfo;
static int sbus_inlist(const char *, const char *const *);
static struct sbus_devinfo * sbus_setup_dinfo(device_t, struct sbus_softc *,
phandle_t);
static void sbus_destroy_dinfo(struct sbus_devinfo *);
static void sbus_intr_enable(void *);
static void sbus_intr_disable(void *);
static void sbus_intr_assign(void *);
static void sbus_intr_clear(void *);
static int sbus_find_intrmap(struct sbus_softc *, u_int, bus_addr_t *,
bus_addr_t *);
static driver_intr_t sbus_overtemp;
static driver_intr_t sbus_pwrfail;
static int sbus_print_res(struct sbus_devinfo *);
static device_method_t sbus_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, sbus_probe),
DEVMETHOD(device_attach, sbus_attach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
/* Bus interface */
DEVMETHOD(bus_print_child, sbus_print_child),
DEVMETHOD(bus_probe_nomatch, sbus_probe_nomatch),
DEVMETHOD(bus_read_ivar, sbus_read_ivar),
DEVMETHOD(bus_alloc_resource, sbus_alloc_resource),
DEVMETHOD(bus_activate_resource, sbus_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
DEVMETHOD(bus_adjust_resource, sbus_adjust_resource),
DEVMETHOD(bus_release_resource, sbus_release_resource),
DEVMETHOD(bus_setup_intr, sbus_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource),
DEVMETHOD(bus_get_resource_list, sbus_get_resource_list),
DEVMETHOD(bus_child_pnpinfo_str, ofw_bus_gen_child_pnpinfo_str),
DEVMETHOD(bus_get_dma_tag, sbus_get_dma_tag),
/* ofw_bus interface */
DEVMETHOD(ofw_bus_get_devinfo, sbus_get_devinfo),
DEVMETHOD(ofw_bus_get_compat, ofw_bus_gen_get_compat),
DEVMETHOD(ofw_bus_get_model, ofw_bus_gen_get_model),
DEVMETHOD(ofw_bus_get_name, ofw_bus_gen_get_name),
DEVMETHOD(ofw_bus_get_node, ofw_bus_gen_get_node),
DEVMETHOD(ofw_bus_get_type, ofw_bus_gen_get_type),
DEVMETHOD_END
};
static driver_t sbus_driver = {
"sbus",
sbus_methods,
sizeof(struct sbus_softc),
};
static devclass_t sbus_devclass;
EARLY_DRIVER_MODULE(sbus, nexus, sbus_driver, sbus_devclass, NULL, NULL,
BUS_PASS_BUS);
MODULE_DEPEND(sbus, nexus, 1, 1, 1);
MODULE_VERSION(sbus, 1);
#define OFW_SBUS_TYPE "sbus"
#define OFW_SBUS_NAME "sbus"
static const struct intr_controller sbus_ic = {
sbus_intr_enable,
sbus_intr_disable,
sbus_intr_assign,
sbus_intr_clear
};
struct sbus_icarg {
struct sbus_softc *sica_sc;
bus_addr_t sica_map;
bus_addr_t sica_clr;
};
static const char *const sbus_order_first[] = {
"auxio",
"dma",
NULL
};
static int
sbus_inlist(const char *name, const char *const *list)
{
int i;
if (name == NULL)
return (0);
for (i = 0; list[i] != NULL; i++) {
if (strcmp(name, list[i]) == 0)
return (1);
}
return (0);
}
static int
sbus_probe(device_t dev)
{
const char *t;
t = ofw_bus_get_type(dev);
if (((t == NULL || strcmp(t, OFW_SBUS_TYPE) != 0)) &&
strcmp(ofw_bus_get_name(dev), OFW_SBUS_NAME) != 0)
return (ENXIO);
device_set_desc(dev, "U2S UPA-SBus bridge");
return (0);
}
static int
sbus_attach(device_t dev)
{
struct sbus_softc *sc;
struct sbus_devinfo *sdi;
struct sbus_icarg *sica;
struct sbus_ranges *range;
struct resource *res;
struct resource_list *rl;
device_t cdev;
bus_addr_t intrclr, intrmap, phys;
bus_size_t size;
u_long vec;
phandle_t child, node;
uint32_t prop;
int i, j;
sc = device_get_softc(dev);
sc->sc_dev = dev;
node = ofw_bus_get_node(dev);
i = 0;
sc->sc_sysio_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &i,
RF_ACTIVE);
if (sc->sc_sysio_res == NULL)
panic("%s: cannot allocate device memory", __func__);
if (OF_getprop(node, "interrupts", &prop, sizeof(prop)) == -1)
panic("%s: cannot get IGN", __func__);
sc->sc_ign = INTIGN(prop);
/*
* Record clock frequency for synchronous SCSI.
* IS THIS THE CORRECT DEFAULT??
*/
if (OF_getprop(node, "clock-frequency", &prop, sizeof(prop)) == -1)
prop = 25000000;
sc->sc_clockfreq = prop;
prop /= 1000;
device_printf(dev, "clock %d.%03d MHz\n", prop / 1000, prop % 1000);
/*
* Collect address translations from the OBP.
*/
if ((sc->sc_nrange = OF_getprop_alloc_multi(node, "ranges",
sizeof(*range), (void **)&range)) == -1) {
panic("%s: error getting ranges property", __func__);
}
sc->sc_rd = malloc(sizeof(*sc->sc_rd) * sc->sc_nrange, M_DEVBUF,
M_NOWAIT | M_ZERO);
if (sc->sc_rd == NULL)
panic("%s: cannot allocate rmans", __func__);
/*
* Preallocate all space that the SBus bridge decodes, so that nothing
* else gets in the way; set up rmans etc.
*/
rl = BUS_GET_RESOURCE_LIST(device_get_parent(dev), dev);
for (i = 0; i < sc->sc_nrange; i++) {
phys = range[i].poffset | ((bus_addr_t)range[i].pspace << 32);
size = range[i].size;
sc->sc_rd[i].rd_slot = range[i].cspace;
sc->sc_rd[i].rd_coffset = range[i].coffset;
sc->sc_rd[i].rd_cend = sc->sc_rd[i].rd_coffset + size;
j = resource_list_add_next(rl, SYS_RES_MEMORY, phys,
phys + size - 1, size);
if ((res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &j,
RF_ACTIVE)) == NULL)
panic("%s: cannot allocate decoded range", __func__);
sc->sc_rd[i].rd_bushandle = rman_get_bushandle(res);
sc->sc_rd[i].rd_rman.rm_type = RMAN_ARRAY;
sc->sc_rd[i].rd_rman.rm_descr = "SBus Device Memory";
if (rman_init(&sc->sc_rd[i].rd_rman) != 0 ||
rman_manage_region(&sc->sc_rd[i].rd_rman, 0, size) != 0)
panic("%s: failed to set up memory rman", __func__);
sc->sc_rd[i].rd_poffset = phys;
sc->sc_rd[i].rd_pend = phys + size;
sc->sc_rd[i].rd_res = res;
}
OF_prop_free(range);
/*
* Get the SBus burst transfer size if burst transfers are supported.
*/
if (OF_getprop(node, "up-burst-sizes", &sc->sc_burst,
sizeof(sc->sc_burst)) == -1 || sc->sc_burst == 0)
sc->sc_burst =
(SBUS_BURST64_DEF << SBUS_BURST64_SHIFT) | SBUS_BURST_DEF;
/* initialise the IOMMU */
/* punch in our copies */
sc->sc_is.is_pmaxaddr = IOMMU_MAXADDR(SBUS_IOMMU_BITS);
sc->sc_is.is_bustag = rman_get_bustag(sc->sc_sysio_res);
sc->sc_is.is_bushandle = rman_get_bushandle(sc->sc_sysio_res);
sc->sc_is.is_iommu = SBR_IOMMU;
sc->sc_is.is_dtag = SBR_IOMMU_TLB_TAG_DIAG;
sc->sc_is.is_ddram = SBR_IOMMU_TLB_DATA_DIAG;
sc->sc_is.is_dqueue = SBR_IOMMU_QUEUE_DIAG;
sc->sc_is.is_dva = SBR_IOMMU_SVADIAG;
sc->sc_is.is_dtcmp = 0;
sc->sc_is.is_sb[0] = SBR_STRBUF;
sc->sc_is.is_sb[1] = 0;
/*
* Note: the SBus IOMMU ignores the high bits of an address, so a NULL
* DMA pointer will be translated by the first page of the IOTSB.
* To detect bugs we'll allocate and ignore the first entry.
*/
iommu_init(device_get_nameunit(dev), &sc->sc_is, 3, -1, 1);
/* Create the DMA tag. */
if (bus_dma_tag_create(bus_get_dma_tag(dev), 8, 0,
sc->sc_is.is_pmaxaddr, ~0, NULL, NULL, sc->sc_is.is_pmaxaddr,
0xff, 0xffffffff, 0, NULL, NULL, &sc->sc_cdmatag) != 0)
panic("%s: bus_dma_tag_create failed", __func__);
/* Customize the tag. */
sc->sc_cdmatag->dt_cookie = &sc->sc_is;
sc->sc_cdmatag->dt_mt = &iommu_dma_methods;
/*
* Hunt through all the interrupt mapping regs and register our
* interrupt controller for the corresponding interrupt vectors.
* We do this early in order to be able to catch stray interrupts.
*/
for (i = 0; i <= SBUS_MAX_INO; i++) {
if (sbus_find_intrmap(sc, i, &intrmap, &intrclr) == 0)
continue;
sica = malloc(sizeof(*sica), M_DEVBUF, M_NOWAIT);
if (sica == NULL)
panic("%s: could not allocate interrupt controller "
"argument", __func__);
sica->sica_sc = sc;
sica->sica_map = intrmap;
sica->sica_clr = intrclr;
#ifdef SBUS_DEBUG
device_printf(dev,
"intr map (INO %d, %s) %#lx: %#lx, clr: %#lx\n",
i, (i & INTMAP_OBIO_MASK) == 0 ? "SBus slot" : "OBIO",
(u_long)intrmap, (u_long)SYSIO_READ8(sc, intrmap),
(u_long)intrclr);
#endif
j = intr_controller_register(INTMAP_VEC(sc->sc_ign, i),
&sbus_ic, sica);
if (j != 0)
device_printf(dev, "could not register interrupt "
"controller for INO %d (%d)\n", i, j);
}
/* Enable the over-temperature and power-fail interrupts. */
i = 4;
sc->sc_ot_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ, &i,
RF_ACTIVE);
if (sc->sc_ot_ires == NULL ||
INTIGN(vec = rman_get_start(sc->sc_ot_ires)) != sc->sc_ign ||
INTVEC(SYSIO_READ8(sc, SBR_THERM_INT_MAP)) != vec ||
intr_vectors[vec].iv_ic != &sbus_ic ||
bus_setup_intr(dev, sc->sc_ot_ires, INTR_TYPE_MISC | INTR_BRIDGE | INTR_MPSAFE,
NULL, sbus_overtemp, sc, &sc->sc_ot_ihand) != 0)
panic("%s: failed to set up temperature interrupt", __func__);
i = 3;
sc->sc_pf_ires = bus_alloc_resource_any(dev, SYS_RES_IRQ, &i,
RF_ACTIVE);
if (sc->sc_pf_ires == NULL ||
INTIGN(vec = rman_get_start(sc->sc_pf_ires)) != sc->sc_ign ||
INTVEC(SYSIO_READ8(sc, SBR_POWER_INT_MAP)) != vec ||
intr_vectors[vec].iv_ic != &sbus_ic ||
bus_setup_intr(dev, sc->sc_pf_ires, INTR_TYPE_MISC | INTR_BRIDGE | INTR_MPSAFE,
NULL, sbus_pwrfail, sc, &sc->sc_pf_ihand) != 0)
panic("%s: failed to set up power fail interrupt", __func__);
/* Initialize the counter-timer. */
sparc64_counter_init(device_get_nameunit(dev),
rman_get_bustag(sc->sc_sysio_res),
rman_get_bushandle(sc->sc_sysio_res), SBR_TC0);
/*
* Loop through ROM children, fixing any relative addresses
* and then configuring each device.
*/
for (child = OF_child(node); child != 0; child = OF_peer(child)) {
if ((sdi = sbus_setup_dinfo(dev, sc, child)) == NULL)
continue;
/*
* For devices where there are variants that are actually
* split into two SBus devices (as opposed to the first
* half of the device being a SBus device and the second
* half hanging off of the first one) like 'auxio' and
* 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device
* which is a prerequisite to the driver attaching to the
* second one with a lower order. Saves us from dealing
* with different probe orders in the respective device
* drivers which generally is more hackish.
*/
cdev = device_add_child_ordered(dev, (OF_child(child) == 0 &&
sbus_inlist(sdi->sdi_obdinfo.obd_name, sbus_order_first)) ?
SBUS_ORDER_FIRST : SBUS_ORDER_NORMAL, NULL, -1);
if (cdev == NULL) {
device_printf(dev,
"<%s>: device_add_child_ordered failed\n",
sdi->sdi_obdinfo.obd_name);
sbus_destroy_dinfo(sdi);
continue;
}
device_set_ivars(cdev, sdi);
}
return (bus_generic_attach(dev));
}
static struct sbus_devinfo *
sbus_setup_dinfo(device_t dev, struct sbus_softc *sc, phandle_t node)
{
struct sbus_devinfo *sdi;
struct sbus_regs *reg;
u_int32_t base, iv, *intr;
int i, nreg, nintr, slot, rslot;
sdi = malloc(sizeof(*sdi), M_DEVBUF, M_ZERO | M_WAITOK);
if (ofw_bus_gen_setup_devinfo(&sdi->sdi_obdinfo, node) != 0) {
free(sdi, M_DEVBUF);
return (NULL);
}
resource_list_init(&sdi->sdi_rl);
slot = -1;
nreg = OF_getprop_alloc_multi(node, "reg", sizeof(*reg), (void **)&reg);
if (nreg == -1) {
if (sdi->sdi_obdinfo.obd_type == NULL ||
strcmp(sdi->sdi_obdinfo.obd_type, "hierarchical") != 0) {
device_printf(dev, "<%s>: incomplete\n",
sdi->sdi_obdinfo.obd_name);
goto fail;
}
} else {
for (i = 0; i < nreg; i++) {
base = reg[i].sbr_offset;
if (SBUS_ABS(base)) {
rslot = SBUS_ABS_TO_SLOT(base);
base = SBUS_ABS_TO_OFFSET(base);
} else
rslot = reg[i].sbr_slot;
if (slot != -1 && slot != rslot) {
device_printf(dev, "<%s>: multiple slots\n",
sdi->sdi_obdinfo.obd_name);
OF_prop_free(reg);
goto fail;
}
slot = rslot;
resource_list_add(&sdi->sdi_rl, SYS_RES_MEMORY, i,
base, base + reg[i].sbr_size, reg[i].sbr_size);
}
OF_prop_free(reg);
}
sdi->sdi_slot = slot;
/*
* The `interrupts' property contains the SBus interrupt level.
*/
nintr = OF_getprop_alloc_multi(node, "interrupts", sizeof(*intr),
(void **)&intr);
if (nintr != -1) {
for (i = 0; i < nintr; i++) {
iv = intr[i];
/*
* SBus card devices need the slot number encoded into
* the vector as this is generally not done.
*/
if ((iv & INTMAP_OBIO_MASK) == 0)
iv |= slot << 3;
iv = INTMAP_VEC(sc->sc_ign, iv);
resource_list_add(&sdi->sdi_rl, SYS_RES_IRQ, i,
iv, iv, 1);
}
OF_prop_free(intr);
}
if (OF_getprop(node, "burst-sizes", &sdi->sdi_burstsz,
sizeof(sdi->sdi_burstsz)) == -1)
sdi->sdi_burstsz = sc->sc_burst;
else
sdi->sdi_burstsz &= sc->sc_burst;
if (OF_getprop(node, "clock-frequency", &sdi->sdi_clockfreq,
sizeof(sdi->sdi_clockfreq)) == -1)
sdi->sdi_clockfreq = sc->sc_clockfreq;
return (sdi);
fail:
sbus_destroy_dinfo(sdi);
return (NULL);
}
static void
sbus_destroy_dinfo(struct sbus_devinfo *dinfo)
{
resource_list_free(&dinfo->sdi_rl);
ofw_bus_gen_destroy_devinfo(&dinfo->sdi_obdinfo);
free(dinfo, M_DEVBUF);
}
static int
sbus_print_child(device_t dev, device_t child)
{
int rv;
rv = bus_print_child_header(dev, child);
rv += sbus_print_res(device_get_ivars(child));
rv += bus_print_child_footer(dev, child);
return (rv);
}
static void
sbus_probe_nomatch(device_t dev, device_t child)
{
const char *type;
device_printf(dev, "<%s>", ofw_bus_get_name(child));
sbus_print_res(device_get_ivars(child));
type = ofw_bus_get_type(child);
printf(" type %s (no driver attached)\n",
type != NULL ? type : "unknown");
}
static int
sbus_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
{
struct sbus_softc *sc;
struct sbus_devinfo *dinfo;
sc = device_get_softc(dev);
if ((dinfo = device_get_ivars(child)) == NULL)
return (ENOENT);
switch (which) {
case SBUS_IVAR_BURSTSZ:
*result = dinfo->sdi_burstsz;
break;
case SBUS_IVAR_CLOCKFREQ:
*result = dinfo->sdi_clockfreq;
break;
case SBUS_IVAR_IGN:
*result = sc->sc_ign;
break;
case SBUS_IVAR_SLOT:
*result = dinfo->sdi_slot;
break;
default:
return (ENOENT);
}
return (0);
}
static struct resource_list *
sbus_get_resource_list(device_t dev, device_t child)
{
struct sbus_devinfo *sdi;
sdi = device_get_ivars(child);
return (&sdi->sdi_rl);
}
static void
sbus_intr_enable(void *arg)
{
struct intr_vector *iv = arg;
struct sbus_icarg *sica = iv->iv_icarg;
SYSIO_WRITE8(sica->sica_sc, sica->sica_map,
INTMAP_ENABLE(iv->iv_vec, iv->iv_mid));
}
static void
sbus_intr_disable(void *arg)
{
struct intr_vector *iv = arg;
struct sbus_icarg *sica = iv->iv_icarg;
SYSIO_WRITE8(sica->sica_sc, sica->sica_map, iv->iv_vec);
}
static void
sbus_intr_assign(void *arg)
{
struct intr_vector *iv = arg;
struct sbus_icarg *sica = iv->iv_icarg;
SYSIO_WRITE8(sica->sica_sc, sica->sica_map, INTMAP_TID(
SYSIO_READ8(sica->sica_sc, sica->sica_map), iv->iv_mid));
}
static void
sbus_intr_clear(void *arg)
{
struct intr_vector *iv = arg;
struct sbus_icarg *sica = iv->iv_icarg;
SYSIO_WRITE8(sica->sica_sc, sica->sica_clr, INTCLR_IDLE);
}
static int
sbus_find_intrmap(struct sbus_softc *sc, u_int ino, bus_addr_t *intrmapptr,
bus_addr_t *intrclrptr)
{
bus_addr_t intrclr, intrmap;
int i;
if (ino > SBUS_MAX_INO) {
device_printf(sc->sc_dev, "out of range INO %d requested\n",
ino);
return (0);
}
if ((ino & INTMAP_OBIO_MASK) == 0) {
intrmap = SBR_SLOT0_INT_MAP + INTSLOT(ino) * 8;
intrclr = SBR_SLOT0_INT_CLR +
(INTSLOT(ino) * 8 * 8) + (INTPRI(ino) * 8);
} else {
intrclr = 0;
for (i = 0, intrmap = SBR_SCSI_INT_MAP;
intrmap <= SBR_RESERVED_INT_MAP; intrmap += 8, i++) {
if (INTVEC(SYSIO_READ8(sc, intrmap)) ==
INTMAP_VEC(sc->sc_ign, ino)) {
intrclr = SBR_SCSI_INT_CLR + i * 8;
break;
}
}
if (intrclr == 0)
return (0);
}
if (intrmapptr != NULL)
*intrmapptr = intrmap;
if (intrclrptr != NULL)
*intrclrptr = intrclr;
return (1);
}
static int
sbus_setup_intr(device_t dev, device_t child, struct resource *ires, int flags,
driver_filter_t *filt, driver_intr_t *intr, void *arg, void **cookiep)
{
struct sbus_softc *sc;
u_long vec;
sc = device_get_softc(dev);
/*
* Make sure the vector is fully specified and we registered
* our interrupt controller for it.
*/
vec = rman_get_start(ires);
if (INTIGN(vec) != sc->sc_ign || intr_vectors[vec].iv_ic != &sbus_ic) {
device_printf(dev, "invalid interrupt vector 0x%lx\n", vec);
return (EINVAL);
}
return (bus_generic_setup_intr(dev, child, ires, flags, filt, intr,
arg, cookiep));
}
static struct resource *
sbus_alloc_resource(device_t bus, device_t child, int type, int *rid,
rman_res_t start, rman_res_t end, rman_res_t count, u_int flags)
{
struct sbus_softc *sc;
struct rman *rm;
struct resource *rv;
struct resource_list *rl;
struct resource_list_entry *rle;
device_t schild;
bus_addr_t toffs;
bus_size_t tend;
int i, slot;
int isdefault, passthrough;
isdefault = RMAN_IS_DEFAULT_RANGE(start, end);
passthrough = (device_get_parent(child) != bus);
rle = NULL;
sc = device_get_softc(bus);
rl = BUS_GET_RESOURCE_LIST(bus, child);
switch (type) {
case SYS_RES_IRQ:
return (resource_list_alloc(rl, bus, child, type, rid, start,
end, count, flags));
case SYS_RES_MEMORY:
if (!passthrough) {
rle = resource_list_find(rl, type, *rid);
if (rle == NULL)
return (NULL);
if (rle->res != NULL)
panic("%s: resource entry is busy", __func__);
if (isdefault) {
start = rle->start;
count = ulmax(count, rle->count);
end = ulmax(rle->end, start + count - 1);
}
}
rm = NULL;
schild = child;
while (device_get_parent(schild) != bus)
schild = device_get_parent(schild);
slot = sbus_get_slot(schild);
for (i = 0; i < sc->sc_nrange; i++) {
if (sc->sc_rd[i].rd_slot != slot ||
start < sc->sc_rd[i].rd_coffset ||
start > sc->sc_rd[i].rd_cend)
continue;
/* Disallow cross-range allocations. */
if (end > sc->sc_rd[i].rd_cend)
return (NULL);
/* We've found the connection to the parent bus */
toffs = start - sc->sc_rd[i].rd_coffset;
tend = end - sc->sc_rd[i].rd_coffset;
rm = &sc->sc_rd[i].rd_rman;
break;
}
if (rm == NULL)
return (NULL);
rv = rman_reserve_resource(rm, toffs, tend, count, flags &
~RF_ACTIVE, child);
if (rv == NULL)
return (NULL);
rman_set_rid(rv, *rid);
if ((flags & RF_ACTIVE) != 0 && bus_activate_resource(child,
type, *rid, rv)) {
rman_release_resource(rv);
return (NULL);
}
if (!passthrough)
rle->res = rv;
return (rv);
default:
return (NULL);
}
}
static int
sbus_activate_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
struct sbus_softc *sc;
struct bus_space_tag *tag;
int i;
switch (type) {
case SYS_RES_IRQ:
return (bus_generic_activate_resource(bus, child, type, rid,
r));
case SYS_RES_MEMORY:
sc = device_get_softc(bus);
for (i = 0; i < sc->sc_nrange; i++) {
if (rman_is_region_manager(r,
&sc->sc_rd[i].rd_rman) != 0) {
tag = sparc64_alloc_bus_tag(r, SBUS_BUS_SPACE);
if (tag == NULL)
return (ENOMEM);
rman_set_bustag(r, tag);
rman_set_bushandle(r,
sc->sc_rd[i].rd_bushandle +
rman_get_start(r));
return (rman_activate_resource(r));
}
}
/* FALLTHROUGH */
default:
return (EINVAL);
}
}
static int
sbus_adjust_resource(device_t bus, device_t child, int type,
struct resource *r, rman_res_t start, rman_res_t end)
{
struct sbus_softc *sc;
int i;
if (type == SYS_RES_MEMORY) {
sc = device_get_softc(bus);
for (i = 0; i < sc->sc_nrange; i++)
if (rman_is_region_manager(r,
&sc->sc_rd[i].rd_rman) != 0)
return (rman_adjust_resource(r, start, end));
return (EINVAL);
}
return (bus_generic_adjust_resource(bus, child, type, r, start, end));
}
static int
sbus_release_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
struct resource_list *rl;
struct resource_list_entry *rle;
int error, passthrough;
passthrough = (device_get_parent(child) != bus);
rl = BUS_GET_RESOURCE_LIST(bus, child);
if (type == SYS_RES_MEMORY) {
if ((rman_get_flags(r) & RF_ACTIVE) != 0) {
error = bus_deactivate_resource(child, type, rid, r);
if (error)
return (error);
}
error = rman_release_resource(r);
if (error != 0)
return (error);
if (!passthrough) {
rle = resource_list_find(rl, type, rid);
KASSERT(rle != NULL,
("%s: resource entry not found!", __func__));
KASSERT(rle->res != NULL,
("%s: resource entry is not busy", __func__));
rle->res = NULL;
}
return (0);
}
return (resource_list_release(rl, bus, child, type, rid, r));
}
static bus_dma_tag_t
sbus_get_dma_tag(device_t bus, device_t child)
{
struct sbus_softc *sc;
sc = device_get_softc(bus);
return (sc->sc_cdmatag);
}
static const struct ofw_bus_devinfo *
sbus_get_devinfo(device_t bus, device_t child)
{
struct sbus_devinfo *sdi;
sdi = device_get_ivars(child);
return (&sdi->sdi_obdinfo);
}
/*
* Handle an overtemp situation.
*
* SPARCs have temperature sensors which generate interrupts
* if the machine's temperature exceeds a certain threshold.
* This handles the interrupt and powers off the machine.
* The same needs to be done to PCI controller drivers.
*/
static void
sbus_overtemp(void *arg __unused)
{
static int shutdown;
/* As the interrupt is cleared we may be called multiple times. */
if (shutdown != 0)
return;
shutdown++;
printf("DANGER: OVER TEMPERATURE detected\nShutting down NOW.\n");
shutdown_nice(RB_POWEROFF);
}
/* Try to shut down in time in case of power failure. */
static void
sbus_pwrfail(void *arg __unused)
{
static int shutdown;
/* As the interrupt is cleared we may be called multiple times. */
if (shutdown != 0)
return;
shutdown++;
printf("Power failure detected\nShutting down NOW.\n");
shutdown_nice(RB_POWEROFF);
}
static int
sbus_print_res(struct sbus_devinfo *sdi)
{
int rv;
rv = 0;
rv += resource_list_print_type(&sdi->sdi_rl, "mem", SYS_RES_MEMORY,
"%#jx");
rv += resource_list_print_type(&sdi->sdi_rl, "irq", SYS_RES_IRQ,
"%jd");
return (rv);
}