49b49cda41
Files required for the NIC driver Import from vendor-sys/alpine-hal/2.7 SVN rev.: 294828 HAL version: 2.7 Obtained from: Semihalf Sponsored by: Annapurna Labs
1160 lines
38 KiB
C
1160 lines
38 KiB
C
/*-
|
||
*******************************************************************************
|
||
Copyright (C) 2015 Annapurna Labs Ltd.
|
||
|
||
This file may be licensed under the terms of the Annapurna Labs Commercial
|
||
License Agreement.
|
||
|
||
Alternatively, this file can be distributed under the terms of the GNU General
|
||
Public License V2 as published by the Free Software Foundation and can be
|
||
found at http://www.gnu.org/licenses/gpl-2.0.html
|
||
|
||
Alternatively, redistribution and use in source and binary forms, with or
|
||
without modification, are permitted provided that the following conditions are
|
||
met:
|
||
|
||
* Redistributions of source code must retain the above copyright notice,
|
||
this list of conditions and the following disclaimer.
|
||
|
||
* Redistributions in binary form must reproduce the above copyright
|
||
notice, this list of conditions and the following disclaimer in
|
||
the documentation and/or other materials provided with the
|
||
distribution.
|
||
|
||
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
||
ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
||
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||
DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR
|
||
ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
||
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
||
LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
||
ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
||
(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
||
SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||
|
||
*******************************************************************************/
|
||
|
||
/**
|
||
* @file al_hal_udma_regs_m2s.h
|
||
*
|
||
* @brief C Header file for the UDMA M2S registers
|
||
*
|
||
*/
|
||
|
||
#ifndef __AL_HAL_UDMA_M2S_REG_H
|
||
#define __AL_HAL_UDMA_M2S_REG_H
|
||
|
||
#include "al_hal_plat_types.h"
|
||
|
||
#ifdef __cplusplus
|
||
extern "C" {
|
||
#endif
|
||
/*
|
||
* Unit Registers
|
||
*/
|
||
|
||
|
||
|
||
struct udma_axi_m2s {
|
||
/* [0x0] Completion write master configuration */
|
||
uint32_t comp_wr_cfg_1;
|
||
/* [0x4] Completion write master configuration */
|
||
uint32_t comp_wr_cfg_2;
|
||
/* [0x8] Data read master configuration */
|
||
uint32_t data_rd_cfg_1;
|
||
/* [0xc] Data read master configuration */
|
||
uint32_t data_rd_cfg_2;
|
||
/* [0x10] Descriptor read master configuration */
|
||
uint32_t desc_rd_cfg_1;
|
||
/* [0x14] Descriptor read master configuration */
|
||
uint32_t desc_rd_cfg_2;
|
||
/* [0x18] Data read master configuration */
|
||
uint32_t data_rd_cfg;
|
||
/* [0x1c] Descriptors read master configuration */
|
||
uint32_t desc_rd_cfg_3;
|
||
/* [0x20] Descriptors write master configuration (completion) */
|
||
uint32_t desc_wr_cfg_1;
|
||
/* [0x24] AXI outstanding configuration */
|
||
uint32_t ostand_cfg;
|
||
uint32_t rsrvd[54];
|
||
};
|
||
struct udma_m2s {
|
||
/*
|
||
* [0x0] DMA state.
|
||
* 00 - No pending tasks
|
||
* 01 – Normal (active)
|
||
* 10 – Abort (error condition)
|
||
* 11 – Reserved
|
||
*/
|
||
uint32_t state;
|
||
/* [0x4] CPU request to change DMA state */
|
||
uint32_t change_state;
|
||
uint32_t rsrvd_0;
|
||
/*
|
||
* [0xc] M2S DMA error log mask.
|
||
* Each error has an interrupt controller cause bit.
|
||
* This register determines if these errors cause the M2S DMA to log the
|
||
* error condition.
|
||
* 0 - Log is enabled.
|
||
* 1 - Log is masked.
|
||
*/
|
||
uint32_t err_log_mask;
|
||
uint32_t rsrvd_1;
|
||
/*
|
||
* [0x14] DMA header log.
|
||
* Sample the packet header that caused the error.
|
||
*/
|
||
uint32_t log_0;
|
||
/*
|
||
* [0x18] DMA header log.
|
||
* Sample the packet header that caused the error.
|
||
*/
|
||
uint32_t log_1;
|
||
/*
|
||
* [0x1c] DMA header log.
|
||
* Sample the packet header that caused the error.
|
||
*/
|
||
uint32_t log_2;
|
||
/*
|
||
* [0x20] DMA header log.
|
||
* Sample the packet header that caused the error.
|
||
*/
|
||
uint32_t log_3;
|
||
/* [0x24] DMA clear error log */
|
||
uint32_t clear_err_log;
|
||
/* [0x28] M2S data FIFO status */
|
||
uint32_t data_fifo_status;
|
||
/* [0x2c] M2S header FIFO status */
|
||
uint32_t header_fifo_status;
|
||
/* [0x30] M2S unack FIFO status */
|
||
uint32_t unack_fifo_status;
|
||
/* [0x34] Select queue for debug */
|
||
uint32_t indirect_ctrl;
|
||
/*
|
||
* [0x38] M2S prefetch FIFO status.
|
||
* Status of the selected queue in M2S_indirect_ctrl
|
||
*/
|
||
uint32_t sel_pref_fifo_status;
|
||
/*
|
||
* [0x3c] M2S completion FIFO status.
|
||
* Status of the selected queue in M2S_indirect_ctrl
|
||
*/
|
||
uint32_t sel_comp_fifo_status;
|
||
/*
|
||
* [0x40] M2S rate limit status.
|
||
* Status of the selected queue in M2S_indirect_ctrl
|
||
*/
|
||
uint32_t sel_rate_limit_status;
|
||
/*
|
||
* [0x44] M2S DWRR scheduler status.
|
||
* Status of the selected queue in M2S_indirect_ctrl
|
||
*/
|
||
uint32_t sel_dwrr_status;
|
||
/* [0x48] M2S state machine and FIFO clear control */
|
||
uint32_t clear_ctrl;
|
||
/* [0x4c] Misc Check enable */
|
||
uint32_t check_en;
|
||
/* [0x50] M2S FIFO enable control, internal */
|
||
uint32_t fifo_en;
|
||
/* [0x54] M2S packet length configuration */
|
||
uint32_t cfg_len;
|
||
/* [0x58] Stream interface configuration */
|
||
uint32_t stream_cfg;
|
||
uint32_t rsrvd[41];
|
||
};
|
||
struct udma_m2s_rd {
|
||
/* [0x0] M2S descriptor prefetch configuration */
|
||
uint32_t desc_pref_cfg_1;
|
||
/* [0x4] M2S descriptor prefetch configuration */
|
||
uint32_t desc_pref_cfg_2;
|
||
/* [0x8] M2S descriptor prefetch configuration */
|
||
uint32_t desc_pref_cfg_3;
|
||
uint32_t rsrvd_0;
|
||
/* [0x10] Data burst read configuration */
|
||
uint32_t data_cfg;
|
||
uint32_t rsrvd[11];
|
||
};
|
||
struct udma_m2s_dwrr {
|
||
/* [0x0] Tx DMA DWRR scheduler configuration */
|
||
uint32_t cfg_sched;
|
||
/* [0x4] Token bucket rate limit control */
|
||
uint32_t ctrl_deficit_cnt;
|
||
uint32_t rsrvd[14];
|
||
};
|
||
struct udma_m2s_rate_limiter {
|
||
/* [0x0] Token bucket rate limit configuration */
|
||
uint32_t gen_cfg;
|
||
/*
|
||
* [0x4] Token bucket rate limit control.
|
||
* Controls the cycle counters.
|
||
*/
|
||
uint32_t ctrl_cycle_cnt;
|
||
/*
|
||
* [0x8] Token bucket rate limit control.
|
||
* Controls the token bucket counter.
|
||
*/
|
||
uint32_t ctrl_token;
|
||
uint32_t rsrvd[13];
|
||
};
|
||
|
||
struct udma_rlimit_common {
|
||
/* [0x0] Token bucket configuration */
|
||
uint32_t cfg_1s;
|
||
/* [0x4] Token bucket rate limit configuration */
|
||
uint32_t cfg_cycle;
|
||
/* [0x8] Token bucket rate limit configuration */
|
||
uint32_t cfg_token_size_1;
|
||
/* [0xc] Token bucket rate limit configuration */
|
||
uint32_t cfg_token_size_2;
|
||
/* [0x10] Token bucket rate limit configuration */
|
||
uint32_t sw_ctrl;
|
||
/*
|
||
* [0x14] Mask the different types of rate limiter.
|
||
* 0 - Rate limit is active.
|
||
* 1 - Rate limit is masked.
|
||
*/
|
||
uint32_t mask;
|
||
};
|
||
|
||
struct udma_m2s_stream_rate_limiter {
|
||
struct udma_rlimit_common rlimit;
|
||
uint32_t rsrvd[10];
|
||
};
|
||
struct udma_m2s_comp {
|
||
/* [0x0] Completion controller configuration */
|
||
uint32_t cfg_1c;
|
||
/* [0x4] Completion controller coalescing configuration */
|
||
uint32_t cfg_coal;
|
||
/* [0x8] Completion controller application acknowledge configuration */
|
||
uint32_t cfg_application_ack;
|
||
uint32_t rsrvd[61];
|
||
};
|
||
struct udma_m2s_stat {
|
||
/* [0x0] Statistics counters configuration */
|
||
uint32_t cfg_st;
|
||
/* [0x4] Counting number of descriptors with First-bit set. */
|
||
uint32_t tx_pkt;
|
||
/*
|
||
* [0x8] Counting the net length of the data buffers [64-bit]
|
||
* Should be read before tx_bytes_high
|
||
*/
|
||
uint32_t tx_bytes_low;
|
||
/*
|
||
* [0xc] Counting the net length of the data buffers [64-bit],
|
||
* Should be read after tx_bytes_low (value is sampled when reading
|
||
* Should be read before tx_bytes_low
|
||
*/
|
||
uint32_t tx_bytes_high;
|
||
/* [0x10] Total number of descriptors read from the host memory */
|
||
uint32_t prefed_desc;
|
||
/* [0x14] Number of packets read from the unack FIFO */
|
||
uint32_t comp_pkt;
|
||
/* [0x18] Number of descriptors written into the completion ring */
|
||
uint32_t comp_desc;
|
||
/*
|
||
* [0x1c] Number of acknowledged packets.
|
||
* (acknowledge received from the stream interface)
|
||
*/
|
||
uint32_t ack_pkts;
|
||
uint32_t rsrvd[56];
|
||
};
|
||
struct udma_m2s_feature {
|
||
/*
|
||
* [0x0] M2S Feature register.
|
||
* M2S instantiation parameters
|
||
*/
|
||
uint32_t reg_1;
|
||
/* [0x4] Reserved M2S feature register */
|
||
uint32_t reg_2;
|
||
/*
|
||
* [0x8] M2S Feature register.
|
||
* M2S instantiation parameters
|
||
*/
|
||
uint32_t reg_3;
|
||
/*
|
||
* [0xc] M2S Feature register.
|
||
* M2S instantiation parameters
|
||
*/
|
||
uint32_t reg_4;
|
||
/*
|
||
* [0x10] M2S Feature register.
|
||
* M2S instantiation parameters
|
||
*/
|
||
uint32_t reg_5;
|
||
uint32_t rsrvd[59];
|
||
};
|
||
struct udma_m2s_q {
|
||
uint32_t rsrvd_0[8];
|
||
/* [0x20] M2S descriptor ring configuration */
|
||
uint32_t cfg;
|
||
/* [0x24] M2S descriptor ring status and information */
|
||
uint32_t status;
|
||
/* [0x28] TX Descriptor Ring Base Pointer [31:4] */
|
||
uint32_t tdrbp_low;
|
||
/* [0x2c] TX Descriptor Ring Base Pointer [63:32] */
|
||
uint32_t tdrbp_high;
|
||
/*
|
||
* [0x30] TX Descriptor Ring Length[23:2]
|
||
*/
|
||
uint32_t tdrl;
|
||
/* [0x34] TX Descriptor Ring Head Pointer */
|
||
uint32_t tdrhp;
|
||
/* [0x38] Tx Descriptor Tail Pointer increment */
|
||
uint32_t tdrtp_inc;
|
||
/* [0x3c] Tx Descriptor Tail Pointer */
|
||
uint32_t tdrtp;
|
||
/* [0x40] TX Descriptor Current Pointer */
|
||
uint32_t tdcp;
|
||
/* [0x44] Tx Completion Ring Base Pointer [31:4] */
|
||
uint32_t tcrbp_low;
|
||
/* [0x48] TX Completion Ring Base Pointer [63:32] */
|
||
uint32_t tcrbp_high;
|
||
/* [0x4c] TX Completion Ring Head Pointer */
|
||
uint32_t tcrhp;
|
||
/*
|
||
* [0x50] Tx Completion Ring Head Pointer internal (Before the
|
||
* coalescing FIFO)
|
||
*/
|
||
uint32_t tcrhp_internal;
|
||
uint32_t rsrvd_1[3];
|
||
/* [0x60] Rate limit configuration */
|
||
struct udma_rlimit_common rlimit;
|
||
uint32_t rsrvd_2[2];
|
||
/* [0x80] DWRR scheduler configuration */
|
||
uint32_t dwrr_cfg_1;
|
||
/* [0x84] DWRR scheduler configuration */
|
||
uint32_t dwrr_cfg_2;
|
||
/* [0x88] DWRR scheduler configuration */
|
||
uint32_t dwrr_cfg_3;
|
||
/* [0x8c] DWRR scheduler software control */
|
||
uint32_t dwrr_sw_ctrl;
|
||
uint32_t rsrvd_3[4];
|
||
/* [0xa0] Completion controller configuration */
|
||
uint32_t comp_cfg;
|
||
uint32_t rsrvd_4[3];
|
||
/* [0xb0] SW control */
|
||
uint32_t q_sw_ctrl;
|
||
uint32_t rsrvd_5[3];
|
||
/* [0xc0] Number of M2S Tx packets after the scheduler */
|
||
uint32_t q_tx_pkt;
|
||
uint32_t rsrvd[975];
|
||
};
|
||
|
||
struct udma_m2s_regs {
|
||
uint32_t rsrvd_0[64];
|
||
struct udma_axi_m2s axi_m2s; /* [0x100] */
|
||
struct udma_m2s m2s; /* [0x200] */
|
||
struct udma_m2s_rd m2s_rd; /* [0x300] */
|
||
struct udma_m2s_dwrr m2s_dwrr; /* [0x340] */
|
||
struct udma_m2s_rate_limiter m2s_rate_limiter; /* [0x380] */
|
||
struct udma_m2s_stream_rate_limiter m2s_stream_rate_limiter; /* [0x3c0] */
|
||
struct udma_m2s_comp m2s_comp; /* [0x400] */
|
||
struct udma_m2s_stat m2s_stat; /* [0x500] */
|
||
struct udma_m2s_feature m2s_feature; /* [0x600] */
|
||
uint32_t rsrvd_1[576];
|
||
struct udma_m2s_q m2s_q[4]; /* [0x1000] */
|
||
};
|
||
|
||
|
||
/*
|
||
* Registers Fields
|
||
*/
|
||
|
||
|
||
/**** comp_wr_cfg_1 register ****/
|
||
/* AXI write ID (AWID) */
|
||
#define UDMA_AXI_M2S_COMP_WR_CFG_1_AWID_MASK 0x000000FF
|
||
#define UDMA_AXI_M2S_COMP_WR_CFG_1_AWID_SHIFT 0
|
||
/* Cache Type */
|
||
#define UDMA_AXI_M2S_COMP_WR_CFG_1_AWCACHE_MASK 0x000F0000
|
||
#define UDMA_AXI_M2S_COMP_WR_CFG_1_AWCACHE_SHIFT 16
|
||
/* Burst type */
|
||
#define UDMA_AXI_M2S_COMP_WR_CFG_1_AWBURST_MASK 0x03000000
|
||
#define UDMA_AXI_M2S_COMP_WR_CFG_1_AWBURST_SHIFT 24
|
||
|
||
/**** comp_wr_cfg_2 register ****/
|
||
/* User extension */
|
||
#define UDMA_AXI_M2S_COMP_WR_CFG_2_AWUSER_MASK 0x000FFFFF
|
||
#define UDMA_AXI_M2S_COMP_WR_CFG_2_AWUSER_SHIFT 0
|
||
/* Bus size, 128-bit */
|
||
#define UDMA_AXI_M2S_COMP_WR_CFG_2_AWSIZE_MASK 0x00700000
|
||
#define UDMA_AXI_M2S_COMP_WR_CFG_2_AWSIZE_SHIFT 20
|
||
/*
|
||
* AXI Master QoS.
|
||
* Used for arbitration between AXI masters
|
||
*/
|
||
#define UDMA_AXI_M2S_COMP_WR_CFG_2_AWQOS_MASK 0x07000000
|
||
#define UDMA_AXI_M2S_COMP_WR_CFG_2_AWQOS_SHIFT 24
|
||
/* Protection Type */
|
||
#define UDMA_AXI_M2S_COMP_WR_CFG_2_AWPROT_MASK 0x70000000
|
||
#define UDMA_AXI_M2S_COMP_WR_CFG_2_AWPROT_SHIFT 28
|
||
|
||
/**** data_rd_cfg_1 register ****/
|
||
/* AXI read ID (ARID) */
|
||
#define UDMA_AXI_M2S_DATA_RD_CFG_1_ARID_MASK 0x000000FF
|
||
#define UDMA_AXI_M2S_DATA_RD_CFG_1_ARID_SHIFT 0
|
||
/* Cache Type */
|
||
#define UDMA_AXI_M2S_DATA_RD_CFG_1_ARCACHE_MASK 0x000F0000
|
||
#define UDMA_AXI_M2S_DATA_RD_CFG_1_ARCACHE_SHIFT 16
|
||
/* Burst type */
|
||
#define UDMA_AXI_M2S_DATA_RD_CFG_1_ARBURST_MASK 0x03000000
|
||
#define UDMA_AXI_M2S_DATA_RD_CFG_1_ARBURST_SHIFT 24
|
||
|
||
/**** data_rd_cfg_2 register ****/
|
||
/* User extension */
|
||
#define UDMA_AXI_M2S_DATA_RD_CFG_2_ARUSER_MASK 0x000FFFFF
|
||
#define UDMA_AXI_M2S_DATA_RD_CFG_2_ARUSER_SHIFT 0
|
||
/* Bus size, 128-bit */
|
||
#define UDMA_AXI_M2S_DATA_RD_CFG_2_ARSIZE_MASK 0x00700000
|
||
#define UDMA_AXI_M2S_DATA_RD_CFG_2_ARSIZE_SHIFT 20
|
||
/*
|
||
* AXI Master QoS.
|
||
* Used for arbitration between AXI masters
|
||
*/
|
||
#define UDMA_AXI_M2S_DATA_RD_CFG_2_ARQOS_MASK 0x07000000
|
||
#define UDMA_AXI_M2S_DATA_RD_CFG_2_ARQOS_SHIFT 24
|
||
/* Protection Type */
|
||
#define UDMA_AXI_M2S_DATA_RD_CFG_2_ARPROT_MASK 0x70000000
|
||
#define UDMA_AXI_M2S_DATA_RD_CFG_2_ARPROT_SHIFT 28
|
||
|
||
/**** desc_rd_cfg_1 register ****/
|
||
/* AXI read ID (ARID) */
|
||
#define UDMA_AXI_M2S_DESC_RD_CFG_1_ARID_MASK 0x000000FF
|
||
#define UDMA_AXI_M2S_DESC_RD_CFG_1_ARID_SHIFT 0
|
||
/* Cache Type */
|
||
#define UDMA_AXI_M2S_DESC_RD_CFG_1_ARCACHE_MASK 0x000F0000
|
||
#define UDMA_AXI_M2S_DESC_RD_CFG_1_ARCACHE_SHIFT 16
|
||
/* Burst type */
|
||
#define UDMA_AXI_M2S_DESC_RD_CFG_1_ARBURST_MASK 0x03000000
|
||
#define UDMA_AXI_M2S_DESC_RD_CFG_1_ARBURST_SHIFT 24
|
||
|
||
/**** desc_rd_cfg_2 register ****/
|
||
/* User extension */
|
||
#define UDMA_AXI_M2S_DESC_RD_CFG_2_ARUSER_MASK 0x000FFFFF
|
||
#define UDMA_AXI_M2S_DESC_RD_CFG_2_ARUSER_SHIFT 0
|
||
/* Bus size, 128-bit */
|
||
#define UDMA_AXI_M2S_DESC_RD_CFG_2_ARSIZE_MASK 0x00700000
|
||
#define UDMA_AXI_M2S_DESC_RD_CFG_2_ARSIZE_SHIFT 20
|
||
/*
|
||
* AXI Master QoS
|
||
* Used for arbitration between AXI masters
|
||
*/
|
||
#define UDMA_AXI_M2S_DESC_RD_CFG_2_ARQOS_MASK 0x07000000
|
||
#define UDMA_AXI_M2S_DESC_RD_CFG_2_ARQOS_SHIFT 24
|
||
/* Protection Type */
|
||
#define UDMA_AXI_M2S_DESC_RD_CFG_2_ARPROT_MASK 0x70000000
|
||
#define UDMA_AXI_M2S_DESC_RD_CFG_2_ARPROT_SHIFT 28
|
||
|
||
/**** data_rd_cfg register ****/
|
||
/*
|
||
* Defines the maximum number of AXI beats for a single AXI burst.
|
||
* This value is used for a burst split decision.
|
||
*/
|
||
#define UDMA_AXI_M2S_DATA_RD_CFG_MAX_AXI_BEATS_MASK 0x000000FF
|
||
#define UDMA_AXI_M2S_DATA_RD_CFG_MAX_AXI_BEATS_SHIFT 0
|
||
/*
|
||
* Enable breaking data read request.
|
||
* Aligned to max_AXI_beats when the total read size is less than max_AXI_beats
|
||
*/
|
||
#define UDMA_AXI_M2S_DATA_RD_CFG_ALWAYS_BREAK_ON_MAX_BOUDRY (1 << 16)
|
||
|
||
/**** desc_rd_cfg_3 register ****/
|
||
/*
|
||
* Defines the maximum number of AXI beats for a single AXI burst.
|
||
* This value is used for a burst split decision.
|
||
* Maximum burst size for reading data( in AXI beats, 128-bits)
|
||
* (default – 16 beats, 256 bytes)
|
||
*/
|
||
#define UDMA_AXI_M2S_DESC_RD_CFG_3_MAX_AXI_BEATS_MASK 0x000000FF
|
||
#define UDMA_AXI_M2S_DESC_RD_CFG_3_MAX_AXI_BEATS_SHIFT 0
|
||
/*
|
||
* Enable breaking descriptor read request.
|
||
* Aligned to max_AXI_beats when the total read size is less than max_AXI_beats.
|
||
*/
|
||
#define UDMA_AXI_M2S_DESC_RD_CFG_3_ALWAYS_BREAK_ON_MAX_BOUDRY (1 << 16)
|
||
|
||
/**** desc_wr_cfg_1 register ****/
|
||
/*
|
||
* Defines the maximum number of AXI beats for a single AXI burst.
|
||
* This value is used for a burst split decision.
|
||
*/
|
||
#define UDMA_AXI_M2S_DESC_WR_CFG_1_MAX_AXI_BEATS_MASK 0x000000FF
|
||
#define UDMA_AXI_M2S_DESC_WR_CFG_1_MAX_AXI_BEATS_SHIFT 0
|
||
/*
|
||
* Minimum burst for writing completion descriptors.
|
||
* Defined in AXI beats
|
||
* 4 Descriptors per beat.
|
||
* Value must be aligned to cache lines (64 bytes).
|
||
* Default value is 2 cache lines, 32 descriptors, 8 beats.
|
||
*/
|
||
#define UDMA_AXI_M2S_DESC_WR_CFG_1_MIN_AXI_BEATS_MASK 0x00FF0000
|
||
#define UDMA_AXI_M2S_DESC_WR_CFG_1_MIN_AXI_BEATS_SHIFT 16
|
||
|
||
/**** ostand_cfg register ****/
|
||
/* Maximum number of outstanding data reads to the AXI (AXI transactions) */
|
||
#define UDMA_AXI_M2S_OSTAND_CFG_MAX_DATA_RD_MASK 0x0000003F
|
||
#define UDMA_AXI_M2S_OSTAND_CFG_MAX_DATA_RD_SHIFT 0
|
||
/*
|
||
* Maximum number of outstanding descriptor reads to the AXI (AXI transactions)
|
||
*/
|
||
#define UDMA_AXI_M2S_OSTAND_CFG_MAX_DESC_RD_MASK 0x00003F00
|
||
#define UDMA_AXI_M2S_OSTAND_CFG_MAX_DESC_RD_SHIFT 8
|
||
/*
|
||
* Maximum number of outstanding descriptor writes to the AXI (AXI transactions)
|
||
*/
|
||
#define UDMA_AXI_M2S_OSTAND_CFG_MAX_COMP_REQ_MASK 0x003F0000
|
||
#define UDMA_AXI_M2S_OSTAND_CFG_MAX_COMP_REQ_SHIFT 16
|
||
/*
|
||
* Maximum number of outstanding data beats for descriptor write to AXI (AXI
|
||
* beats)
|
||
*/
|
||
#define UDMA_AXI_M2S_OSTAND_CFG_MAX_COMP_DATA_WR_MASK 0xFF000000
|
||
#define UDMA_AXI_M2S_OSTAND_CFG_MAX_COMP_DATA_WR_SHIFT 24
|
||
|
||
/**** state register ****/
|
||
/* Completion control */
|
||
#define UDMA_M2S_STATE_COMP_CTRL_MASK 0x00000003
|
||
#define UDMA_M2S_STATE_COMP_CTRL_SHIFT 0
|
||
/* Stream interface */
|
||
#define UDMA_M2S_STATE_STREAM_IF_MASK 0x00000030
|
||
#define UDMA_M2S_STATE_STREAM_IF_SHIFT 4
|
||
/* Data read control */
|
||
#define UDMA_M2S_STATE_DATA_RD_CTRL_MASK 0x00000300
|
||
#define UDMA_M2S_STATE_DATA_RD_CTRL_SHIFT 8
|
||
/* Descriptor prefetch */
|
||
#define UDMA_M2S_STATE_DESC_PREF_MASK 0x00003000
|
||
#define UDMA_M2S_STATE_DESC_PREF_SHIFT 12
|
||
|
||
/**** change_state register ****/
|
||
/* Start normal operation */
|
||
#define UDMA_M2S_CHANGE_STATE_NORMAL (1 << 0)
|
||
/* Stop normal operation */
|
||
#define UDMA_M2S_CHANGE_STATE_DIS (1 << 1)
|
||
/*
|
||
* Stop all machines.
|
||
* (Prefetch, scheduling, completion and stream interface)
|
||
*/
|
||
#define UDMA_M2S_CHANGE_STATE_ABORT (1 << 2)
|
||
|
||
/**** err_log_mask register ****/
|
||
/*
|
||
* Mismatch of packet serial number.
|
||
* (between first packet in the unacknowledged FIFO and received ack from the
|
||
* stream)
|
||
*/
|
||
#define UDMA_M2S_ERR_LOG_MASK_COMP_PKT_MISMATCH (1 << 0)
|
||
/* Parity error */
|
||
#define UDMA_M2S_ERR_LOG_MASK_STREAM_AXI_PARITY (1 << 1)
|
||
/* AXI response error */
|
||
#define UDMA_M2S_ERR_LOG_MASK_STREAM_AXI_RESPONSE (1 << 2)
|
||
/* AXI timeout (ack not received) */
|
||
#define UDMA_M2S_ERR_LOG_MASK_STREAM_AXI_TOUT (1 << 3)
|
||
/* Parity error */
|
||
#define UDMA_M2S_ERR_LOG_MASK_COMP_AXI_PARITY (1 << 4)
|
||
/* AXI response error */
|
||
#define UDMA_M2S_ERR_LOG_MASK_COMP_AXI_RESPONSE (1 << 5)
|
||
/* AXI timeout */
|
||
#define UDMA_M2S_ERR_LOG_MASK_COMP_AXI_TOUT (1 << 6)
|
||
/* Parity error */
|
||
#define UDMA_M2S_ERR_LOG_MASK_DATA_AXI_PARITY (1 << 7)
|
||
/* AXI response error */
|
||
#define UDMA_M2S_ERR_LOG_MASK_DATA_AXI_RESPONSE (1 << 8)
|
||
/* AXI timeout */
|
||
#define UDMA_M2S_ERR_LOG_MASK_DATA_AXI_TOUT (1 << 9)
|
||
/* Parity error */
|
||
#define UDMA_M2S_ERR_LOG_MASK_PREF_AXI_PARITY (1 << 10)
|
||
/* AXI response error */
|
||
#define UDMA_M2S_ERR_LOG_MASK_PREF_AXI_RESPONSE (1 << 11)
|
||
/* AXI timeout */
|
||
#define UDMA_M2S_ERR_LOG_MASK_PREF_AXI_TOUT (1 << 12)
|
||
/* Packet length error */
|
||
#define UDMA_M2S_ERR_LOG_MASK_PREF_PKT_LEN_OVERFLOW (1 << 13)
|
||
/* Maximum number of descriptors per packet error */
|
||
#define UDMA_M2S_ERR_LOG_MASK_PREF_MAX_DESC_CNT (1 << 14)
|
||
/* Error in first bit indication of the descriptor */
|
||
#define UDMA_M2S_ERR_LOG_MASK_PREF_FIRST (1 << 15)
|
||
/* Error in last bit indication of the descriptor */
|
||
#define UDMA_M2S_ERR_LOG_MASK_PREF_LAST (1 << 16)
|
||
/* Ring_ID error */
|
||
#define UDMA_M2S_ERR_LOG_MASK_PREF_RING_ID (1 << 17)
|
||
/* Data buffer parity error */
|
||
#define UDMA_M2S_ERR_LOG_MASK_DATA_BUFF_PARITY (1 << 18)
|
||
/* Internal error */
|
||
#define UDMA_M2S_ERR_LOG_MASK_INTERNAL_MASK 0xFFF80000
|
||
#define UDMA_M2S_ERR_LOG_MASK_INTERNAL_SHIFT 19
|
||
|
||
/**** clear_err_log register ****/
|
||
/* Clear error log */
|
||
#define UDMA_M2S_CLEAR_ERR_LOG_CLEAR (1 << 0)
|
||
|
||
/**** data_fifo_status register ****/
|
||
/* FIFO used indication */
|
||
#define UDMA_M2S_DATA_FIFO_STATUS_USED_MASK 0x0000FFFF
|
||
#define UDMA_M2S_DATA_FIFO_STATUS_USED_SHIFT 0
|
||
/* FIFO empty indication */
|
||
#define UDMA_M2S_DATA_FIFO_STATUS_EMPTY (1 << 24)
|
||
/* FIFO full indication */
|
||
#define UDMA_M2S_DATA_FIFO_STATUS_FULL (1 << 28)
|
||
|
||
/**** header_fifo_status register ****/
|
||
/* FIFO used indication */
|
||
#define UDMA_M2S_HEADER_FIFO_STATUS_USED_MASK 0x0000FFFF
|
||
#define UDMA_M2S_HEADER_FIFO_STATUS_USED_SHIFT 0
|
||
/* FIFO empty indication */
|
||
#define UDMA_M2S_HEADER_FIFO_STATUS_EMPTY (1 << 24)
|
||
/* FIFO full indication */
|
||
#define UDMA_M2S_HEADER_FIFO_STATUS_FULL (1 << 28)
|
||
|
||
/**** unack_fifo_status register ****/
|
||
/* FIFO used indication */
|
||
#define UDMA_M2S_UNACK_FIFO_STATUS_USED_MASK 0x0000FFFF
|
||
#define UDMA_M2S_UNACK_FIFO_STATUS_USED_SHIFT 0
|
||
/* FIFO empty indication */
|
||
#define UDMA_M2S_UNACK_FIFO_STATUS_EMPTY (1 << 24)
|
||
/* FIFO full indication */
|
||
#define UDMA_M2S_UNACK_FIFO_STATUS_FULL (1 << 28)
|
||
|
||
/**** indirect_ctrl register ****/
|
||
/* Selected queue for status read */
|
||
#define UDMA_M2S_INDIRECT_CTRL_Q_NUM_MASK 0x00000FFF
|
||
#define UDMA_M2S_INDIRECT_CTRL_Q_NUM_SHIFT 0
|
||
|
||
/**** sel_pref_fifo_status register ****/
|
||
/* FIFO used indication */
|
||
#define UDMA_M2S_SEL_PREF_FIFO_STATUS_USED_MASK 0x0000FFFF
|
||
#define UDMA_M2S_SEL_PREF_FIFO_STATUS_USED_SHIFT 0
|
||
/* FIFO empty indication */
|
||
#define UDMA_M2S_SEL_PREF_FIFO_STATUS_EMPTY (1 << 24)
|
||
/* FIFO full indication */
|
||
#define UDMA_M2S_SEL_PREF_FIFO_STATUS_FULL (1 << 28)
|
||
|
||
/**** sel_comp_fifo_status register ****/
|
||
/* FIFO used indication */
|
||
#define UDMA_M2S_SEL_COMP_FIFO_STATUS_USED_MASK 0x0000FFFF
|
||
#define UDMA_M2S_SEL_COMP_FIFO_STATUS_USED_SHIFT 0
|
||
/* FIFO empty indication */
|
||
#define UDMA_M2S_SEL_COMP_FIFO_STATUS_EMPTY (1 << 24)
|
||
/* FIFO full indication */
|
||
#define UDMA_M2S_SEL_COMP_FIFO_STATUS_FULL (1 << 28)
|
||
|
||
/**** sel_rate_limit_status register ****/
|
||
/* Token counter */
|
||
#define UDMA_M2S_SEL_RATE_LIMIT_STATUS_TOKEN_CNT_MASK 0x00FFFFFF
|
||
#define UDMA_M2S_SEL_RATE_LIMIT_STATUS_TOKEN_CNT_SHIFT 0
|
||
|
||
/**** sel_dwrr_status register ****/
|
||
/* Deficit counter */
|
||
#define UDMA_M2S_SEL_DWRR_STATUS_DEFICIT_CNT_MASK 0x00FFFFFF
|
||
#define UDMA_M2S_SEL_DWRR_STATUS_DEFICIT_CNT_SHIFT 0
|
||
|
||
/**** cfg_len register ****/
|
||
/* Maximum packet size for the M2S */
|
||
#define UDMA_M2S_CFG_LEN_MAX_PKT_SIZE_MASK 0x000FFFFF
|
||
#define UDMA_M2S_CFG_LEN_MAX_PKT_SIZE_SHIFT 0
|
||
/*
|
||
* Length encoding for 64K.
|
||
* 0 - length 0x0000 = 0
|
||
* 1 - length 0x0000 = 64k
|
||
*/
|
||
#define UDMA_M2S_CFG_LEN_ENCODE_64K (1 << 24)
|
||
|
||
/**** stream_cfg register ****/
|
||
/*
|
||
* Disables the stream interface operation.
|
||
* Changing to 1 stops at the end of packet transmission.
|
||
*/
|
||
#define UDMA_M2S_STREAM_CFG_DISABLE (1 << 0)
|
||
/*
|
||
* Configuration of the stream FIFO read control.
|
||
* 0 - Cut through
|
||
* 1 - Threshold based
|
||
*/
|
||
#define UDMA_M2S_STREAM_CFG_RD_MODE (1 << 1)
|
||
/* Minimum number of beats to start packet transmission. */
|
||
#define UDMA_M2S_STREAM_CFG_RD_TH_MASK 0x0003FF00
|
||
#define UDMA_M2S_STREAM_CFG_RD_TH_SHIFT 8
|
||
|
||
/**** desc_pref_cfg_1 register ****/
|
||
/* Size of the descriptor prefetch FIFO (in descriptors) */
|
||
#define UDMA_M2S_RD_DESC_PREF_CFG_1_FIFO_DEPTH_MASK 0x000000FF
|
||
#define UDMA_M2S_RD_DESC_PREF_CFG_1_FIFO_DEPTH_SHIFT 0
|
||
|
||
/**** desc_pref_cfg_2 register ****/
|
||
/* Maximum number of descriptors per packet */
|
||
#define UDMA_M2S_RD_DESC_PREF_CFG_2_MAX_DESC_PER_PKT_MASK 0x0000001F
|
||
#define UDMA_M2S_RD_DESC_PREF_CFG_2_MAX_DESC_PER_PKT_SHIFT 0
|
||
/*
|
||
* Force RR arbitration in the prefetch arbiter.
|
||
* 0 -Standard arbitration based on queue QoS
|
||
* 1 - Force Round Robin arbitration
|
||
*/
|
||
#define UDMA_M2S_RD_DESC_PREF_CFG_2_PREF_FORCE_RR (1 << 16)
|
||
|
||
/**** desc_pref_cfg_3 register ****/
|
||
/*
|
||
* Minimum descriptor burst size when prefetch FIFO level is below the
|
||
* descriptor prefetch threshold
|
||
* (must be 1)
|
||
*/
|
||
#define UDMA_M2S_RD_DESC_PREF_CFG_3_MIN_BURST_BELOW_THR_MASK 0x0000000F
|
||
#define UDMA_M2S_RD_DESC_PREF_CFG_3_MIN_BURST_BELOW_THR_SHIFT 0
|
||
/*
|
||
* Minimum descriptor burst size when prefetch FIFO level is above the
|
||
* descriptor prefetch threshold
|
||
*/
|
||
#define UDMA_M2S_RD_DESC_PREF_CFG_3_MIN_BURST_ABOVE_THR_MASK 0x000000F0
|
||
#define UDMA_M2S_RD_DESC_PREF_CFG_3_MIN_BURST_ABOVE_THR_SHIFT 4
|
||
/*
|
||
* Descriptor fetch threshold.
|
||
* Used as a threshold to determine the allowed minimum descriptor burst size.
|
||
* (Must be at least max_desc_per_pkt)
|
||
*/
|
||
#define UDMA_M2S_RD_DESC_PREF_CFG_3_PREF_THR_MASK 0x0000FF00
|
||
#define UDMA_M2S_RD_DESC_PREF_CFG_3_PREF_THR_SHIFT 8
|
||
|
||
/**** data_cfg register ****/
|
||
/*
|
||
* Maximum number of data beats in the data read FIFO.
|
||
* Defined based on data FIFO size
|
||
* (default FIFO size 2KB → 128 beats)
|
||
*/
|
||
#define UDMA_M2S_RD_DATA_CFG_DATA_FIFO_DEPTH_MASK 0x000003FF
|
||
#define UDMA_M2S_RD_DATA_CFG_DATA_FIFO_DEPTH_SHIFT 0
|
||
/*
|
||
* Maximum number of packets in the data read FIFO.
|
||
* Defined based on header FIFO size
|
||
*/
|
||
#define UDMA_M2S_RD_DATA_CFG_MAX_PKT_LIMIT_MASK 0x00FF0000
|
||
#define UDMA_M2S_RD_DATA_CFG_MAX_PKT_LIMIT_SHIFT 16
|
||
|
||
/**** cfg_sched register ****/
|
||
/*
|
||
* Enable the DWRR scheduler.
|
||
* If this bit is 0, queues with same QoS will be served with RR scheduler.
|
||
*/
|
||
#define UDMA_M2S_DWRR_CFG_SCHED_EN_DWRR (1 << 0)
|
||
/*
|
||
* Scheduler operation mode.
|
||
* 0 - Byte mode
|
||
* 1 - Packet mode
|
||
*/
|
||
#define UDMA_M2S_DWRR_CFG_SCHED_PKT_MODE_EN (1 << 4)
|
||
/*
|
||
* Enable incrementing the weight factor between DWRR iterations.
|
||
* 00 - Don't increase the increment factor.
|
||
* 01 - Increment once
|
||
* 10 - Increment exponential
|
||
* 11 - Reserved
|
||
*/
|
||
#define UDMA_M2S_DWRR_CFG_SCHED_WEIGHT_INC_MASK 0x00000300
|
||
#define UDMA_M2S_DWRR_CFG_SCHED_WEIGHT_INC_SHIFT 8
|
||
/*
|
||
* Increment factor power of 2.
|
||
* 7 --> 128 bytes
|
||
* This is the factor used to multiply the weight.
|
||
*/
|
||
#define UDMA_M2S_DWRR_CFG_SCHED_INC_FACTOR_MASK 0x000F0000
|
||
#define UDMA_M2S_DWRR_CFG_SCHED_INC_FACTOR_SHIFT 16
|
||
|
||
/**** ctrl_deficit_cnt register ****/
|
||
/*
|
||
* Init value for the deficit counter.
|
||
* Initializes the deficit counters of all queues to this value any time this
|
||
* register is written.
|
||
*/
|
||
#define UDMA_M2S_DWRR_CTRL_DEFICIT_CNT_INIT_MASK 0x00FFFFFF
|
||
#define UDMA_M2S_DWRR_CTRL_DEFICIT_CNT_INIT_SHIFT 0
|
||
|
||
/**** gen_cfg register ****/
|
||
/* Size of the basic token fill cycle, system clock cycles */
|
||
#define UDMA_M2S_RATE_LIMITER_GEN_CFG_SHORT_CYCLE_SIZE_MASK 0x0000FFFF
|
||
#define UDMA_M2S_RATE_LIMITER_GEN_CFG_SHORT_CYCLE_SIZE_SHIFT 0
|
||
/*
|
||
* Rate limiter operation mode.
|
||
* 0 - Byte mode
|
||
* 1 - Packet mode
|
||
*/
|
||
#define UDMA_M2S_RATE_LIMITER_GEN_CFG_PKT_MODE_EN (1 << 24)
|
||
|
||
/**** ctrl_cycle_cnt register ****/
|
||
/* Reset the short and long cycle counters. */
|
||
#define UDMA_M2S_RATE_LIMITER_CTRL_CYCLE_CNT_RST (1 << 0)
|
||
|
||
/**** ctrl_token register ****/
|
||
/*
|
||
* Init value for the token counter.
|
||
* Initializes the token counters of all queues to this value any time this
|
||
* register is written.
|
||
*/
|
||
#define UDMA_M2S_RATE_LIMITER_CTRL_TOKEN_RST_MASK 0x00FFFFFF
|
||
#define UDMA_M2S_RATE_LIMITER_CTRL_TOKEN_RST_SHIFT 0
|
||
|
||
/**** cfg_1s register ****/
|
||
/* Maximum number of accumulated bytes in the token counter */
|
||
#define UDMA_M2S_STREAM_RATE_LIMITER_CFG_1S_MAX_BURST_SIZE_MASK 0x00FFFFFF
|
||
#define UDMA_M2S_STREAM_RATE_LIMITER_CFG_1S_MAX_BURST_SIZE_SHIFT 0
|
||
/* Enable the rate limiter. */
|
||
#define UDMA_M2S_STREAM_RATE_LIMITER_CFG_1S_EN (1 << 24)
|
||
/* Stop token fill. */
|
||
#define UDMA_M2S_STREAM_RATE_LIMITER_CFG_1S_PAUSE (1 << 25)
|
||
|
||
/**** cfg_cycle register ****/
|
||
/* Number of short cycles between token fills */
|
||
#define UDMA_M2S_STREAM_RATE_LIMITER_CFG_CYCLE_LONG_CYCLE_SIZE_MASK 0x0000FFFF
|
||
#define UDMA_M2S_STREAM_RATE_LIMITER_CFG_CYCLE_LONG_CYCLE_SIZE_SHIFT 0
|
||
|
||
/**** cfg_token_size_1 register ****/
|
||
/* Number of bits to add in each long cycle */
|
||
#define UDMA_M2S_STREAM_RATE_LIMITER_CFG_TOKEN_SIZE_1_LONG_CYCLE_MASK 0x0007FFFF
|
||
#define UDMA_M2S_STREAM_RATE_LIMITER_CFG_TOKEN_SIZE_1_LONG_CYCLE_SHIFT 0
|
||
|
||
/**** cfg_token_size_2 register ****/
|
||
/* Number of bits to add in each short cycle */
|
||
#define UDMA_M2S_STREAM_RATE_LIMITER_CFG_TOKEN_SIZE_2_SHORT_CYCLE_MASK 0x0007FFFF
|
||
#define UDMA_M2S_STREAM_RATE_LIMITER_CFG_TOKEN_SIZE_2_SHORT_CYCLE_SHIFT 0
|
||
|
||
/**** sw_ctrl register ****/
|
||
/* Reset the token bucket counter. */
|
||
#define UDMA_M2S_STREAM_RATE_LIMITER_SW_CTRL_RST_TOKEN_CNT (1 << 0)
|
||
|
||
/**** mask register ****/
|
||
/* Mask the external rate limiter. */
|
||
#define UDMA_M2S_STREAM_RATE_LIMITER_MASK_EXTERNAL_RATE_LIMITER (1 << 0)
|
||
/* Mask the internal rate limiter. */
|
||
#define UDMA_M2S_STREAM_RATE_LIMITER_MASK_INTERNAL_RATE_LIMITER (1 << 1)
|
||
/* Mask the external application pause interface. */
|
||
#define UDMA_M2S_STREAM_RATE_LIMITER_MASK_EXTERNAL_PAUSE (1 << 3)
|
||
|
||
/**** cfg_1c register ****/
|
||
/*
|
||
* Completion FIFO size
|
||
* (descriptors per queue)
|
||
*/
|
||
#define UDMA_M2S_COMP_CFG_1C_COMP_FIFO_DEPTH_MASK 0x000000FF
|
||
#define UDMA_M2S_COMP_CFG_1C_COMP_FIFO_DEPTH_SHIFT 0
|
||
/*
|
||
* Unacknowledged FIFO size.
|
||
* (descriptors)
|
||
*/
|
||
#define UDMA_M2S_COMP_CFG_1C_UNACK_FIFO_DEPTH_MASK 0x0001FF00
|
||
#define UDMA_M2S_COMP_CFG_1C_UNACK_FIFO_DEPTH_SHIFT 8
|
||
/*
|
||
* Enable promotion.
|
||
* Enable the promotion of the current queue in progress for the completion
|
||
* write scheduler.
|
||
*/
|
||
#define UDMA_M2S_COMP_CFG_1C_Q_PROMOTION (1 << 24)
|
||
/* Force RR arbitration in the completion arbiter */
|
||
#define UDMA_M2S_COMP_CFG_1C_FORCE_RR (1 << 25)
|
||
/* Minimum number of free completion entries to qualify for promotion */
|
||
#define UDMA_M2S_COMP_CFG_1C_Q_FREE_MIN_MASK 0xF0000000
|
||
#define UDMA_M2S_COMP_CFG_1C_Q_FREE_MIN_SHIFT 28
|
||
|
||
/**** cfg_application_ack register ****/
|
||
/*
|
||
* Acknowledge timeout timer.
|
||
* ACK from the application through the stream interface)
|
||
*/
|
||
#define UDMA_M2S_COMP_CFG_APPLICATION_ACK_TOUT_MASK 0x00FFFFFF
|
||
#define UDMA_M2S_COMP_CFG_APPLICATION_ACK_TOUT_SHIFT 0
|
||
|
||
/**** cfg_st register ****/
|
||
/* Use additional length value for all statistics counters. */
|
||
#define UDMA_M2S_STAT_CFG_ST_USE_EXTRA_LEN (1 << 0)
|
||
|
||
/**** reg_1 register ****/
|
||
/*
|
||
* Read the size of the descriptor prefetch FIFO
|
||
* (descriptors).
|
||
*/
|
||
#define UDMA_M2S_FEATURE_REG_1_DESC_PREFERCH_FIFO_DEPTH_MASK 0x000000FF
|
||
#define UDMA_M2S_FEATURE_REG_1_DESC_PREFERCH_FIFO_DEPTH_SHIFT 0
|
||
|
||
/**** reg_3 register ****/
|
||
/*
|
||
* Maximum number of data beats in the data read FIFO.
|
||
* Defined based on data FIFO size
|
||
* (default FIFO size 2KB → 128 beats)
|
||
*/
|
||
#define UDMA_M2S_FEATURE_REG_3_DATA_FIFO_DEPTH_MASK 0x000003FF
|
||
#define UDMA_M2S_FEATURE_REG_3_DATA_FIFO_DEPTH_SHIFT 0
|
||
/*
|
||
* Maximum number of packets in the data read FIFO.
|
||
* Defined based on header FIFO size
|
||
*/
|
||
#define UDMA_M2S_FEATURE_REG_3_DATA_RD_MAX_PKT_LIMIT_MASK 0x00FF0000
|
||
#define UDMA_M2S_FEATURE_REG_3_DATA_RD_MAX_PKT_LIMIT_SHIFT 16
|
||
|
||
/**** reg_4 register ****/
|
||
/*
|
||
* Size of the completion FIFO of each queue
|
||
* (words)
|
||
*/
|
||
#define UDMA_M2S_FEATURE_REG_4_COMP_FIFO_DEPTH_MASK 0x000000FF
|
||
#define UDMA_M2S_FEATURE_REG_4_COMP_FIFO_DEPTH_SHIFT 0
|
||
/* Size of the unacknowledged FIFO (descriptors) */
|
||
#define UDMA_M2S_FEATURE_REG_4_COMP_UNACK_FIFO_DEPTH_MASK 0x0001FF00
|
||
#define UDMA_M2S_FEATURE_REG_4_COMP_UNACK_FIFO_DEPTH_SHIFT 8
|
||
|
||
/**** reg_5 register ****/
|
||
/* Maximum number of outstanding data reads to AXI */
|
||
#define UDMA_M2S_FEATURE_REG_5_MAX_DATA_RD_OSTAND_MASK 0x0000003F
|
||
#define UDMA_M2S_FEATURE_REG_5_MAX_DATA_RD_OSTAND_SHIFT 0
|
||
/* Maximum number of outstanding descriptor reads to AXI */
|
||
#define UDMA_M2S_FEATURE_REG_5_MAX_DESC_RD_OSTAND_MASK 0x00003F00
|
||
#define UDMA_M2S_FEATURE_REG_5_MAX_DESC_RD_OSTAND_SHIFT 8
|
||
/*
|
||
* Maximum number of outstanding descriptor writes to AXI.
|
||
* (AXI transactions)
|
||
*/
|
||
#define UDMA_M2S_FEATURE_REG_5_MAX_COMP_REQ_MASK 0x003F0000
|
||
#define UDMA_M2S_FEATURE_REG_5_MAX_COMP_REQ_SHIFT 16
|
||
/*
|
||
* Maximum number of outstanding data beats for descriptor write to AXI.
|
||
* (AXI beats)
|
||
*/
|
||
#define UDMA_M2S_FEATURE_REG_5_MAX_COMP_DATA_WR_OSTAND_MASK 0xFF000000
|
||
#define UDMA_M2S_FEATURE_REG_5_MAX_COMP_DATA_WR_OSTAND_SHIFT 24
|
||
|
||
/**** cfg register ****/
|
||
/*
|
||
* Length offset to be used for each packet from this queue.
|
||
* (length offset is used for the scheduler and rate limiter).
|
||
*/
|
||
#define UDMA_M2S_Q_CFG_PKT_LEN_OFFSET_MASK 0x0000FFFF
|
||
#define UDMA_M2S_Q_CFG_PKT_LEN_OFFSET_SHIFT 0
|
||
/*
|
||
* Enable operation of this queue.
|
||
* Start prefetch.
|
||
*/
|
||
#define UDMA_M2S_Q_CFG_EN_PREF (1 << 16)
|
||
/*
|
||
* Enable operation of this queue.
|
||
* Start scheduling.
|
||
*/
|
||
#define UDMA_M2S_Q_CFG_EN_SCHEDULING (1 << 17)
|
||
/* Allow prefetch of less than minimum prefetch burst size. */
|
||
#define UDMA_M2S_Q_CFG_ALLOW_LT_MIN_PREF (1 << 20)
|
||
/* Configure the AXI AWCACHE for completion write. */
|
||
#define UDMA_M2S_Q_CFG_AXI_AWCACHE_COMP_MASK 0x0F000000
|
||
#define UDMA_M2S_Q_CFG_AXI_AWCACHE_COMP_SHIFT 24
|
||
/*
|
||
* AXI QoS for the selected queue.
|
||
* This value is used in AXI transactions associated with this queue and the
|
||
* prefetch and completion arbiters.
|
||
*/
|
||
#define UDMA_M2S_Q_CFG_AXI_QOS_MASK 0x70000000
|
||
#define UDMA_M2S_Q_CFG_AXI_QOS_SHIFT 28
|
||
|
||
/**** status register ****/
|
||
/* Indicates how many entries are used in the queue */
|
||
#define UDMA_M2S_Q_STATUS_Q_USED_MASK 0x01FFFFFF
|
||
#define UDMA_M2S_Q_STATUS_Q_USED_SHIFT 0
|
||
/*
|
||
* prefetch status
|
||
* 0 – prefetch operation is stopped
|
||
* 1 – prefetch is operational
|
||
*/
|
||
#define UDMA_M2S_Q_STATUS_PREFETCH (1 << 28)
|
||
/*
|
||
* Queue scheduler status
|
||
* 0 – queue is not active and not participating in scheduling
|
||
* 1 – queue is active and participating in the scheduling process
|
||
*/
|
||
#define UDMA_M2S_Q_STATUS_SCHEDULER (1 << 29)
|
||
/* Queue is suspended due to DMB */
|
||
#define UDMA_M2S_Q_STATUS_Q_DMB (1 << 30)
|
||
/*
|
||
* Queue full indication.
|
||
* (used by the host when head pointer equals tail pointer).
|
||
*/
|
||
#define UDMA_M2S_Q_STATUS_Q_FULL (1 << 31)
|
||
/*
|
||
* M2S Descriptor Ring Base address [31:4].
|
||
* Value of the base address of the M2S descriptor ring
|
||
* [3:0] - 0 - 16B alignment is enforced
|
||
* ([11:4] should be 0 for 4KB alignment)
|
||
*/
|
||
#define UDMA_M2S_Q_TDRBP_LOW_ADDR_MASK 0xFFFFFFF0
|
||
#define UDMA_M2S_Q_TDRBP_LOW_ADDR_SHIFT 4
|
||
|
||
/**** TDRL register ****/
|
||
/*
|
||
* Length of the descriptor ring.
|
||
* (descriptors)
|
||
* Associated with the ring base address, ends at maximum burst size alignment.
|
||
*/
|
||
#define UDMA_M2S_Q_TDRL_OFFSET_MASK 0x00FFFFFF
|
||
#define UDMA_M2S_Q_TDRL_OFFSET_SHIFT 0
|
||
|
||
/**** TDRHP register ****/
|
||
/*
|
||
* Relative offset of the next descriptor that needs to be read into the
|
||
* prefetch FIFO.
|
||
* Incremented when the DMA reads valid descriptors from the host memory to the
|
||
* prefetch FIFO.
|
||
* Note that this is the offset in # of descriptors and not in byte address.
|
||
*/
|
||
#define UDMA_M2S_Q_TDRHP_OFFSET_MASK 0x00FFFFFF
|
||
#define UDMA_M2S_Q_TDRHP_OFFSET_SHIFT 0
|
||
/* Ring ID */
|
||
#define UDMA_M2S_Q_TDRHP_RING_ID_MASK 0xC0000000
|
||
#define UDMA_M2S_Q_TDRHP_RING_ID_SHIFT 30
|
||
|
||
/**** TDRTP_inc register ****/
|
||
/* Increments the value in Q_TDRTP (descriptors) */
|
||
#define UDMA_M2S_Q_TDRTP_INC_VAL_MASK 0x00FFFFFF
|
||
#define UDMA_M2S_Q_TDRTP_INC_VAL_SHIFT 0
|
||
|
||
/**** TDRTP register ****/
|
||
/*
|
||
* Relative offset of the next free descriptor in the host memory.
|
||
* Note that this is the offset in # of descriptors and not in byte address.
|
||
*/
|
||
#define UDMA_M2S_Q_TDRTP_OFFSET_MASK 0x00FFFFFF
|
||
#define UDMA_M2S_Q_TDRTP_OFFSET_SHIFT 0
|
||
/* Ring ID */
|
||
#define UDMA_M2S_Q_TDRTP_RING_ID_MASK 0xC0000000
|
||
#define UDMA_M2S_Q_TDRTP_RING_ID_SHIFT 30
|
||
|
||
/**** TDCP register ****/
|
||
/*
|
||
* Relative offset of the first descriptor in the prefetch FIFO.
|
||
* This is the next descriptor that will be read by the scheduler.
|
||
*/
|
||
#define UDMA_M2S_Q_TDCP_OFFSET_MASK 0x00FFFFFF
|
||
#define UDMA_M2S_Q_TDCP_OFFSET_SHIFT 0
|
||
/* Ring ID */
|
||
#define UDMA_M2S_Q_TDCP_RING_ID_MASK 0xC0000000
|
||
#define UDMA_M2S_Q_TDCP_RING_ID_SHIFT 30
|
||
/*
|
||
* M2S Descriptor Ring Base address [31:4].
|
||
* Value of the base address of the M2S descriptor ring
|
||
* [3:0] - 0 - 16B alignment is enforced
|
||
* ([11:4] should be 0 for 4KB alignment)
|
||
* NOTE:
|
||
* Length of the descriptor ring (in descriptors) associated with the ring base
|
||
* address. Ends at maximum burst size alignment.
|
||
*/
|
||
#define UDMA_M2S_Q_TCRBP_LOW_ADDR_MASK 0xFFFFFFF0
|
||
#define UDMA_M2S_Q_TCRBP_LOW_ADDR_SHIFT 4
|
||
|
||
/**** TCRHP register ****/
|
||
/*
|
||
* Relative offset of the next descriptor that needs to be updated by the
|
||
* completion controller.
|
||
* Note: This is in descriptors and not in byte address.
|
||
*/
|
||
#define UDMA_M2S_Q_TCRHP_OFFSET_MASK 0x00FFFFFF
|
||
#define UDMA_M2S_Q_TCRHP_OFFSET_SHIFT 0
|
||
/* Ring ID */
|
||
#define UDMA_M2S_Q_TCRHP_RING_ID_MASK 0xC0000000
|
||
#define UDMA_M2S_Q_TCRHP_RING_ID_SHIFT 30
|
||
|
||
/**** TCRHP_internal register ****/
|
||
/*
|
||
* Relative offset of the next descriptor that needs to be updated by the
|
||
* completion controller.
|
||
* Note: This is in descriptors and not in byte address.
|
||
*/
|
||
#define UDMA_M2S_Q_TCRHP_INTERNAL_OFFSET_MASK 0x00FFFFFF
|
||
#define UDMA_M2S_Q_TCRHP_INTERNAL_OFFSET_SHIFT 0
|
||
/* Ring ID */
|
||
#define UDMA_M2S_Q_TCRHP_INTERNAL_RING_ID_MASK 0xC0000000
|
||
#define UDMA_M2S_Q_TCRHP_INTERNAL_RING_ID_SHIFT 30
|
||
|
||
/**** rate_limit_cfg_1 register ****/
|
||
/* Maximum number of accumulated bytes in the token counter. */
|
||
#define UDMA_M2S_Q_RATE_LIMIT_CFG_1_MAX_BURST_SIZE_MASK 0x00FFFFFF
|
||
#define UDMA_M2S_Q_RATE_LIMIT_CFG_1_MAX_BURST_SIZE_SHIFT 0
|
||
/* Enable the rate limiter. */
|
||
#define UDMA_M2S_Q_RATE_LIMIT_CFG_1_EN (1 << 24)
|
||
/* Stop token fill. */
|
||
#define UDMA_M2S_Q_RATE_LIMIT_CFG_1_PAUSE (1 << 25)
|
||
|
||
/**** rate_limit_cfg_cycle register ****/
|
||
/* Number of short cycles between token fills */
|
||
#define UDMA_M2S_Q_RATE_LIMIT_CFG_CYCLE_LONG_CYCLE_SIZE_MASK 0x0000FFFF
|
||
#define UDMA_M2S_Q_RATE_LIMIT_CFG_CYCLE_LONG_CYCLE_SIZE_SHIFT 0
|
||
|
||
/**** rate_limit_cfg_token_size_1 register ****/
|
||
/* Number of bits to add in each long cycle */
|
||
#define UDMA_M2S_Q_RATE_LIMIT_CFG_TOKEN_SIZE_1_LONG_CYCLE_MASK 0x0007FFFF
|
||
#define UDMA_M2S_Q_RATE_LIMIT_CFG_TOKEN_SIZE_1_LONG_CYCLE_SHIFT 0
|
||
|
||
/**** rate_limit_cfg_token_size_2 register ****/
|
||
/* Number of bits to add in each cycle */
|
||
#define UDMA_M2S_Q_RATE_LIMIT_CFG_TOKEN_SIZE_2_SHORT_CYCLE_MASK 0x0007FFFF
|
||
#define UDMA_M2S_Q_RATE_LIMIT_CFG_TOKEN_SIZE_2_SHORT_CYCLE_SHIFT 0
|
||
|
||
/**** rate_limit_sw_ctrl register ****/
|
||
/* Reset the token bucket counter. */
|
||
#define UDMA_M2S_Q_RATE_LIMIT_SW_CTRL_RST_TOKEN_CNT (1 << 0)
|
||
|
||
/**** rate_limit_mask register ****/
|
||
/* Mask the external rate limiter. */
|
||
#define UDMA_M2S_Q_RATE_LIMIT_MASK_EXTERNAL_RATE_LIMITER (1 << 0)
|
||
/* Mask the internal rate limiter. */
|
||
#define UDMA_M2S_Q_RATE_LIMIT_MASK_INTERNAL_RATE_LIMITER (1 << 1)
|
||
/*
|
||
* Mask the internal pause mechanism for DMB.
|
||
* (Data Memory Barrier).
|
||
*/
|
||
#define UDMA_M2S_Q_RATE_LIMIT_MASK_INTERNAL_PAUSE_DMB (1 << 2)
|
||
/* Mask the external application pause interface. */
|
||
#define UDMA_M2S_Q_RATE_LIMIT_MASK_EXTERNAL_PAUSE (1 << 3)
|
||
|
||
/**** dwrr_cfg_1 register ****/
|
||
/* Maximum number of accumulated bytes in the deficit counter */
|
||
#define UDMA_M2S_Q_DWRR_CFG_1_MAX_DEFICIT_CNT_SIZE_MASK 0x00FFFFFF
|
||
#define UDMA_M2S_Q_DWRR_CFG_1_MAX_DEFICIT_CNT_SIZE_SHIFT 0
|
||
/* Bypass the DWRR. */
|
||
#define UDMA_M2S_Q_DWRR_CFG_1_STRICT (1 << 24)
|
||
/* Stop deficit counter increment. */
|
||
#define UDMA_M2S_Q_DWRR_CFG_1_PAUSE (1 << 25)
|
||
|
||
/**** dwrr_cfg_2 register ****/
|
||
/*
|
||
* Value for the queue QoS.
|
||
* Queues with the same QoS value are scheduled with RR/DWRR.
|
||
* Only LOG(number of queues) is used.
|
||
*/
|
||
#define UDMA_M2S_Q_DWRR_CFG_2_Q_QOS_MASK 0x000000FF
|
||
#define UDMA_M2S_Q_DWRR_CFG_2_Q_QOS_SHIFT 0
|
||
|
||
/**** dwrr_cfg_3 register ****/
|
||
/* Queue weight */
|
||
#define UDMA_M2S_Q_DWRR_CFG_3_WEIGHT_MASK 0x000000FF
|
||
#define UDMA_M2S_Q_DWRR_CFG_3_WEIGHT_SHIFT 0
|
||
|
||
/**** dwrr_sw_ctrl register ****/
|
||
/* Reset the DWRR deficit counter. */
|
||
#define UDMA_M2S_Q_DWRR_SW_CTRL_RST_CNT (1 << 0)
|
||
|
||
/**** comp_cfg register ****/
|
||
/* Enable writing to the completion ring */
|
||
#define UDMA_M2S_Q_COMP_CFG_EN_COMP_RING_UPDATE (1 << 0)
|
||
/* Disable the completion coalescing function. */
|
||
#define UDMA_M2S_Q_COMP_CFG_DIS_COMP_COAL (1 << 1)
|
||
|
||
/**** q_sw_ctrl register ****/
|
||
/*
|
||
* Reset the DMB hardware barrier
|
||
* (enable queue operation).
|
||
*/
|
||
#define UDMA_M2S_Q_SW_CTRL_RST_DMB (1 << 0)
|
||
/* Reset the tail pointer hardware. */
|
||
#define UDMA_M2S_Q_SW_CTRL_RST_TAIL_PTR (1 << 1)
|
||
/* Reset the head pointer hardware. */
|
||
#define UDMA_M2S_Q_SW_CTRL_RST_HEAD_PTR (1 << 2)
|
||
/* Reset the current pointer hardware. */
|
||
#define UDMA_M2S_Q_SW_CTRL_RST_CURRENT_PTR (1 << 3)
|
||
/* Reset the queue */
|
||
#define UDMA_M2S_Q_SW_CTRL_RST_Q (1 << 8)
|
||
|
||
#ifdef __cplusplus
|
||
}
|
||
#endif
|
||
|
||
#endif /* __AL_HAL_UDMA_M2S_REG_H */
|