freebsd-dev/sys/arm/amlogic/aml8726/aml8726_machdep.c
Ganbold Tsagaankhuu c119629dd0 This modifies several FreeBSD drivers to use the GNU approach to
supply clk81 information.  It also changes the hardware strings
in some of the drivers to match what's present in the GNU files.

Submitted by:  John Wehle
Reviewed by:   imp
2015-04-11 08:34:41 +00:00

210 lines
5.2 KiB
C

/*-
* Copyright 2013-2015 John Wehle <john@feith.com>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include "opt_global.h"
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#define _ARM32_BUS_DMA_PRIVATE
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <machine/bus.h>
#include <machine/devmap.h>
#include <machine/machdep.h>
#include <machine/platform.h>
#include <dev/fdt/fdt_common.h>
#include <arm/amlogic/aml8726/aml8726_soc.h>
#include <arm/amlogic/aml8726/aml8726_clkmsr.h>
#if defined(SOCDEV_PA) && defined(SOCDEV_VA)
vm_offset_t aml8726_aobus_kva_base = SOCDEV_VA;
#else
vm_offset_t aml8726_aobus_kva_base;
#endif
static void
aml8726_fixup_busfreq()
{
phandle_t node;
pcell_t freq, prop;
ssize_t len;
/*
* Set the bus-frequency for the SoC simple-bus if it
* needs updating (meaning the current frequency is zero).
*/
if ((freq = aml8726_clkmsr_bus_frequency()) == 0 ||
(node = OF_finddevice("/soc")) == 0 ||
fdt_is_compatible_strict(node, "simple-bus") == 0)
while (1);
freq = cpu_to_fdt32(freq);
len = OF_getencprop(node, "bus-frequency", &prop, sizeof(prop));
if ((len / sizeof(prop)) == 1 && prop == 0)
OF_setprop(node, "bus-frequency", (void *)&freq, sizeof(freq));
}
vm_offset_t
platform_lastaddr(void)
{
return (arm_devmap_lastaddr());
}
void
platform_probe_and_attach(void)
{
}
void
platform_gpio_init(void)
{
/*
* The UART console driver used for debugging early boot code
* needs to know the virtual base address of the aobus. It's
* expected to equal SOCDEV_VA prior to initarm calling setttb
* ... afterwards it needs to be updated due to the new page
* tables.
*
* This means there's a deadzone in initarm between setttb
* and platform_gpio_init during which printf can't be used.
*/
aml8726_aobus_kva_base =
(vm_offset_t)arm_devmap_ptov(0xc8100000, 0x100000);
/*
* The hardware mux used by clkmsr is unique to the SoC (though
* currently clk81 is at a fixed location, however that might
* change in the future).
*/
aml8726_identify_soc();
/*
* This FDT fixup should arguably be called through fdt_fixup_table,
* however currently there's no mechanism to specify a fixup which
* should always be invoked.
*
* It needs to be called prior to the console being initialized which
* is why it's called here, rather than from platform_late_init.
*/
aml8726_fixup_busfreq();
}
void
platform_late_init(void)
{
}
/*
* Construct static devmap entries to map out the core
* peripherals using 1mb section mappings.
*/
int
platform_devmap_init(void)
{
arm_devmap_add_entry(0xc1100000, 0x200000); /* cbus */
arm_devmap_add_entry(0xc4200000, 0x100000); /* pl310 */
arm_devmap_add_entry(0xc4300000, 0x100000); /* periph */
arm_devmap_add_entry(0xc8000000, 0x100000); /* apbbus */
arm_devmap_add_entry(0xc8100000, 0x100000); /* aobus */
arm_devmap_add_entry(0xc9000000, 0x800000); /* ahbbus */
arm_devmap_add_entry(0xd9000000, 0x100000); /* ahb */
arm_devmap_add_entry(0xda000000, 0x100000); /* secbus */
return (0);
}
struct arm32_dma_range *
bus_dma_get_range(void)
{
return (NULL);
}
int
bus_dma_get_range_nb(void)
{
return (0);
}
struct fdt_fixup_entry fdt_fixup_table[] = {
{ NULL, NULL }
};
static int
fdt_pic_decode_ic(phandle_t node, pcell_t *intr, int *interrupt, int *trig,
int *pol)
{
/*
* The single core chips have just an Amlogic PIC. However the
* multi core chips also have a GIC.
*/
#ifdef SMP
if (!fdt_is_compatible_strict(node, "arm,cortex-a9-gic"))
#else
if (!fdt_is_compatible_strict(node, "amlogic,aml8726-pic"))
#endif
return (ENXIO);
*interrupt = fdt32_to_cpu(intr[1]);
*trig = INTR_TRIGGER_EDGE;
*pol = INTR_POLARITY_HIGH;
switch (*interrupt) {
case 30: /* INT_USB_A */
case 31: /* INT_USB_B */
*trig = INTR_TRIGGER_LEVEL;
break;
default:
break;
}
#ifdef SMP
*interrupt += 32;
#endif
return (0);
}
fdt_pic_decode_t fdt_pic_table[] = {
&fdt_pic_decode_ic,
NULL
};