419 lines
13 KiB
C
419 lines
13 KiB
C
/*-
|
|
* Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include "opt_ata.h"
|
|
#include <sys/param.h>
|
|
#include <sys/module.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/ata.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/sema.h>
|
|
#include <sys/taskqueue.h>
|
|
#include <vm/uma.h>
|
|
#include <machine/stdarg.h>
|
|
#include <machine/resource.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <dev/pci/pcivar.h>
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/ata/ata-all.h>
|
|
#include <dev/ata/ata-pci.h>
|
|
#include <ata_if.h>
|
|
|
|
/* local prototypes */
|
|
static int ata_via_chipinit(device_t dev);
|
|
static int ata_via_ch_attach(device_t dev);
|
|
static int ata_via_ch_detach(device_t dev);
|
|
static void ata_via_reset(device_t dev);
|
|
static int ata_via_old_setmode(device_t dev, int target, int mode);
|
|
static void ata_via_southbridge_fixup(device_t dev);
|
|
static int ata_via_new_setmode(device_t dev, int target, int mode);
|
|
static int ata_via_sata_ch_attach(device_t dev);
|
|
static int ata_via_sata_getrev(device_t dev, int target);
|
|
static int ata_via_sata_setmode(device_t dev, int target, int mode);
|
|
|
|
/* misc defines */
|
|
#define VIA33 0
|
|
#define VIA66 1
|
|
#define VIA100 2
|
|
#define VIA133 3
|
|
|
|
#define VIACLK 0x01
|
|
#define VIABUG 0x02
|
|
#define VIABAR 0x04
|
|
#define VIAAHCI 0x08
|
|
#define VIASATA 0x10
|
|
|
|
|
|
/*
|
|
* VIA Technologies Inc. chipset support functions
|
|
*/
|
|
static int
|
|
ata_via_probe(device_t dev)
|
|
{
|
|
struct ata_pci_controller *ctlr = device_get_softc(dev);
|
|
static struct ata_chip_id ids[] =
|
|
{{ ATA_VIA82C586, 0x02, VIA33, 0x00, ATA_UDMA2, "82C586B" },
|
|
{ ATA_VIA82C586, 0x00, VIA33, 0x00, ATA_WDMA2, "82C586" },
|
|
{ ATA_VIA82C596, 0x12, VIA66, VIACLK, ATA_UDMA4, "82C596B" },
|
|
{ ATA_VIA82C596, 0x00, VIA33, 0x00, ATA_UDMA2, "82C596" },
|
|
{ ATA_VIA82C686, 0x40, VIA100, VIABUG, ATA_UDMA5, "82C686B"},
|
|
{ ATA_VIA82C686, 0x10, VIA66, VIACLK, ATA_UDMA4, "82C686A" },
|
|
{ ATA_VIA82C686, 0x00, VIA33, 0x00, ATA_UDMA2, "82C686" },
|
|
{ ATA_VIA8231, 0x00, VIA100, VIABUG, ATA_UDMA5, "8231" },
|
|
{ ATA_VIA8233, 0x00, VIA100, 0x00, ATA_UDMA5, "8233" },
|
|
{ ATA_VIA8233C, 0x00, VIA100, 0x00, ATA_UDMA5, "8233C" },
|
|
{ ATA_VIA8233A, 0x00, VIA133, 0x00, ATA_UDMA6, "8233A" },
|
|
{ ATA_VIA8235, 0x00, VIA133, 0x00, ATA_UDMA6, "8235" },
|
|
{ ATA_VIA8237, 0x00, VIA133, 0x00, ATA_UDMA6, "8237" },
|
|
{ ATA_VIA8237A, 0x00, VIA133, 0x00, ATA_UDMA6, "8237A" },
|
|
{ ATA_VIA8237S, 0x00, VIA133, 0x00, ATA_UDMA6, "8237S" },
|
|
{ ATA_VIA8237_5372, 0x00, VIA133, 0x00, ATA_UDMA6, "8237" },
|
|
{ ATA_VIA8237_7372, 0x00, VIA133, 0x00, ATA_UDMA6, "8237" },
|
|
{ ATA_VIA8251, 0x00, VIA133, 0x00, ATA_UDMA6, "8251" },
|
|
{ ATA_VIACX700, 0x00, VIA133, VIASATA, ATA_SA150, "CX700" },
|
|
{ ATA_VIAVX800, 0x00, VIA133, VIASATA, ATA_SA150, "VX800" },
|
|
{ ATA_VIAVX855, 0x00, VIA133, 0x00, ATA_UDMA6, "VX855" },
|
|
{ 0, 0, 0, 0, 0, 0 }};
|
|
static struct ata_chip_id new_ids[] =
|
|
{{ ATA_VIA6410, 0x00, 0, 0x00, ATA_UDMA6, "6410" },
|
|
{ ATA_VIA6420, 0x00, 7, 0x00, ATA_SA150, "6420" },
|
|
{ ATA_VIA6421, 0x00, 6, VIABAR, ATA_SA150, "6421" },
|
|
{ ATA_VIA8237A, 0x00, 7, 0x00, ATA_SA150, "8237A" },
|
|
{ ATA_VIA8237S, 0x00, 7, 0x00, ATA_SA150, "8237S" },
|
|
{ ATA_VIA8237_5372, 0x00, 7, 0x00, ATA_SA300, "8237" },
|
|
{ ATA_VIA8237_7372, 0x00, 7, 0x00, ATA_SA300, "8237" },
|
|
{ ATA_VIA8251, 0x00, 0, VIAAHCI, ATA_SA300, "8251" },
|
|
{ 0, 0, 0, 0, 0, 0 }};
|
|
|
|
if (pci_get_vendor(dev) != ATA_VIA_ID)
|
|
return ENXIO;
|
|
|
|
if (pci_get_devid(dev) == ATA_VIA82C571 ||
|
|
pci_get_devid(dev) == ATA_VIACX700IDE ||
|
|
pci_get_devid(dev) == ATA_VIASATAIDE) {
|
|
if (!(ctlr->chip = ata_find_chip(dev, ids, -99)))
|
|
return ENXIO;
|
|
}
|
|
else {
|
|
if (!(ctlr->chip = ata_match_chip(dev, new_ids)))
|
|
return ENXIO;
|
|
}
|
|
|
|
ata_set_desc(dev);
|
|
ctlr->chipinit = ata_via_chipinit;
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
|
|
static int
|
|
ata_via_chipinit(device_t dev)
|
|
{
|
|
struct ata_pci_controller *ctlr = device_get_softc(dev);
|
|
|
|
if (ata_setup_interrupt(dev, ata_generic_intr))
|
|
return ENXIO;
|
|
|
|
/* AHCI SATA */
|
|
if (ctlr->chip->cfg2 & VIAAHCI) {
|
|
if (ata_ahci_chipinit(dev) != ENXIO)
|
|
return (0);
|
|
}
|
|
/* 2 SATA without SATA registers on first channel + 1 PATA on second */
|
|
if (ctlr->chip->cfg2 & VIASATA) {
|
|
ctlr->ch_attach = ata_via_sata_ch_attach;
|
|
ctlr->setmode = ata_via_sata_setmode;
|
|
ctlr->getrev = ata_via_sata_getrev;
|
|
return 0;
|
|
}
|
|
/* Legacy SATA/SATA+PATA with SATA registers in BAR(5). */
|
|
if (ctlr->chip->max_dma >= ATA_SA150) {
|
|
ctlr->r_type2 = SYS_RES_IOPORT;
|
|
ctlr->r_rid2 = PCIR_BAR(5);
|
|
if ((ctlr->r_res2 = bus_alloc_resource_any(dev, ctlr->r_type2,
|
|
&ctlr->r_rid2, RF_ACTIVE))) {
|
|
ctlr->ch_attach = ata_via_ch_attach;
|
|
ctlr->ch_detach = ata_via_ch_detach;
|
|
ctlr->reset = ata_via_reset;
|
|
}
|
|
if (ctlr->chip->cfg2 & VIABAR) {
|
|
ctlr->channels = 3;
|
|
ctlr->setmode = ata_via_new_setmode;
|
|
} else
|
|
ctlr->setmode = ata_sata_setmode;
|
|
ctlr->getrev = ata_sata_getrev;
|
|
return 0;
|
|
}
|
|
|
|
/* prepare for ATA-66 on the 82C686a and 82C596b */
|
|
if (ctlr->chip->cfg2 & VIACLK)
|
|
pci_write_config(dev, 0x50, 0x030b030b, 4);
|
|
|
|
/* the southbridge might need the data corruption fix */
|
|
if (ctlr->chip->cfg2 & VIABUG)
|
|
ata_via_southbridge_fixup(dev);
|
|
|
|
/* set fifo configuration half'n'half */
|
|
pci_write_config(dev, 0x43,
|
|
(pci_read_config(dev, 0x43, 1) & 0x90) | 0x2a, 1);
|
|
|
|
/* set status register read retry */
|
|
pci_write_config(dev, 0x44, pci_read_config(dev, 0x44, 1) | 0x08, 1);
|
|
|
|
/* set DMA read & end-of-sector fifo flush */
|
|
pci_write_config(dev, 0x46,
|
|
(pci_read_config(dev, 0x46, 1) & 0x0c) | 0xf0, 1);
|
|
|
|
/* set sector size */
|
|
pci_write_config(dev, 0x60, DEV_BSIZE, 2);
|
|
pci_write_config(dev, 0x68, DEV_BSIZE, 2);
|
|
|
|
ctlr->setmode = ata_via_old_setmode;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ata_via_ch_attach(device_t dev)
|
|
{
|
|
struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
/* newer SATA chips has resources in one BAR for each channel */
|
|
if (ctlr->chip->cfg2 & VIABAR) {
|
|
struct resource *r_io;
|
|
int i, rid;
|
|
|
|
ata_pci_dmainit(dev);
|
|
|
|
rid = PCIR_BAR(ch->unit);
|
|
if (!(r_io = bus_alloc_resource_any(device_get_parent(dev),
|
|
SYS_RES_IOPORT,
|
|
&rid, RF_ACTIVE)))
|
|
return ENXIO;
|
|
|
|
for (i = ATA_DATA; i <= ATA_COMMAND; i ++) {
|
|
ch->r_io[i].res = r_io;
|
|
ch->r_io[i].offset = i;
|
|
}
|
|
ch->r_io[ATA_CONTROL].res = r_io;
|
|
ch->r_io[ATA_CONTROL].offset = 2 + ATA_IOSIZE;
|
|
ch->r_io[ATA_IDX_ADDR].res = r_io;
|
|
ata_default_registers(dev);
|
|
for (i = ATA_BMCMD_PORT; i <= ATA_BMDTP_PORT; i++) {
|
|
ch->r_io[i].res = ctlr->r_res1;
|
|
ch->r_io[i].offset = (i - ATA_BMCMD_PORT)+(ch->unit * ATA_BMIOSIZE);
|
|
}
|
|
ata_pci_hw(dev);
|
|
if (ch->unit >= 2)
|
|
return 0;
|
|
}
|
|
else {
|
|
/* setup the usual register normal pci style */
|
|
if (ata_pci_ch_attach(dev))
|
|
return ENXIO;
|
|
}
|
|
|
|
ch->r_io[ATA_SSTATUS].res = ctlr->r_res2;
|
|
ch->r_io[ATA_SSTATUS].offset = (ch->unit << ctlr->chip->cfg1);
|
|
ch->r_io[ATA_SERROR].res = ctlr->r_res2;
|
|
ch->r_io[ATA_SERROR].offset = 0x04 + (ch->unit << ctlr->chip->cfg1);
|
|
ch->r_io[ATA_SCONTROL].res = ctlr->r_res2;
|
|
ch->r_io[ATA_SCONTROL].offset = 0x08 + (ch->unit << ctlr->chip->cfg1);
|
|
ch->flags |= ATA_NO_SLAVE;
|
|
ch->flags |= ATA_SATA;
|
|
|
|
/* XXX SOS PHY hotplug handling missing in VIA chip ?? */
|
|
/* XXX SOS unknown how to enable PHY state change interrupt */
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
ata_via_ch_detach(device_t dev)
|
|
{
|
|
struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
/* newer SATA chips has resources in one BAR for each channel */
|
|
if (ctlr->chip->cfg2 & VIABAR) {
|
|
int rid;
|
|
|
|
rid = PCIR_BAR(ch->unit);
|
|
bus_release_resource(device_get_parent(dev),
|
|
SYS_RES_IOPORT, rid, ch->r_io[ATA_CONTROL].res);
|
|
|
|
ata_pci_dmafini(dev);
|
|
}
|
|
else {
|
|
/* setup the usual register normal pci style */
|
|
if (ata_pci_ch_detach(dev))
|
|
return ENXIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
ata_via_reset(device_t dev)
|
|
{
|
|
struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
if ((ctlr->chip->cfg2 & VIABAR) && (ch->unit > 1))
|
|
ata_generic_reset(dev);
|
|
else
|
|
if (ata_sata_phy_reset(dev, -1, 1))
|
|
ata_generic_reset(dev);
|
|
}
|
|
|
|
static int
|
|
ata_via_new_setmode(device_t dev, int target, int mode)
|
|
{
|
|
device_t parent = device_get_parent(dev);
|
|
struct ata_pci_controller *ctlr = device_get_softc(parent);
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
if ((ctlr->chip->cfg2 & VIABAR) && (ch->unit > 1)) {
|
|
int piomode;
|
|
u_int8_t pio_timings[] = { 0xa8, 0x65, 0x65, 0x32, 0x20 };
|
|
u_int8_t dma_timings[] = { 0xee, 0xe8, 0xe6, 0xe4, 0xe2, 0xe1, 0xe0 };
|
|
|
|
/* This chip can't do WDMA. */
|
|
if (mode >= ATA_WDMA0 && mode < ATA_UDMA0)
|
|
mode = ATA_PIO4;
|
|
if (mode >= ATA_UDMA0) {
|
|
pci_write_config(parent, 0xb3,
|
|
dma_timings[mode & ATA_MODE_MASK], 1);
|
|
piomode = ATA_PIO4;
|
|
} else
|
|
piomode = mode;
|
|
pci_write_config(parent, 0xab, pio_timings[ata_mode2idx(piomode)], 1);
|
|
} else
|
|
mode = ata_sata_setmode(dev, target, mode);
|
|
return (mode);
|
|
}
|
|
|
|
static int
|
|
ata_via_old_setmode(device_t dev, int target, int mode)
|
|
{
|
|
device_t parent = device_get_parent(dev);
|
|
struct ata_pci_controller *ctlr = device_get_softc(parent);
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
int devno = (ch->unit << 1) + target;
|
|
int reg = 0x53 - devno;
|
|
int piomode;
|
|
uint8_t timings[] = { 0xa8, 0x65, 0x42, 0x22, 0x20, 0xa8, 0x22, 0x20 };
|
|
uint8_t modes[][7] = {
|
|
{ 0xc2, 0xc1, 0xc0, 0x00, 0x00, 0x00, 0x00 }, /* VIA ATA33 */
|
|
{ 0xee, 0xec, 0xea, 0xe9, 0xe8, 0x00, 0x00 }, /* VIA ATA66 */
|
|
{ 0xf7, 0xf6, 0xf4, 0xf2, 0xf1, 0xf0, 0x00 }, /* VIA ATA100 */
|
|
{ 0xf7, 0xf7, 0xf6, 0xf4, 0xf2, 0xf1, 0xf0 } }; /* VIA ATA133 */
|
|
|
|
mode = min(mode, ctlr->chip->max_dma);
|
|
/* Set UDMA timings */
|
|
if (mode >= ATA_UDMA0) {
|
|
pci_write_config(parent, reg,
|
|
modes[ctlr->chip->cfg1][mode & ATA_MODE_MASK], 1);
|
|
piomode = ATA_PIO4;
|
|
} else {
|
|
pci_write_config(parent, reg, 0x8b, 1);
|
|
piomode = mode;
|
|
}
|
|
/* Set WDMA/PIO timings */
|
|
if (ctlr->chip->cfg1 != VIA133)
|
|
pci_write_config(parent, reg - 0x08,timings[ata_mode2idx(piomode)], 1);
|
|
return (mode);
|
|
}
|
|
|
|
static void
|
|
ata_via_southbridge_fixup(device_t dev)
|
|
{
|
|
device_t *children;
|
|
int nchildren, i;
|
|
|
|
if (device_get_children(device_get_parent(dev), &children, &nchildren))
|
|
return;
|
|
|
|
for (i = 0; i < nchildren; i++) {
|
|
if (pci_get_devid(children[i]) == ATA_VIA8363 ||
|
|
pci_get_devid(children[i]) == ATA_VIA8371 ||
|
|
pci_get_devid(children[i]) == ATA_VIA8662 ||
|
|
pci_get_devid(children[i]) == ATA_VIA8361) {
|
|
u_int8_t reg76 = pci_read_config(children[i], 0x76, 1);
|
|
|
|
if ((reg76 & 0xf0) != 0xd0) {
|
|
device_printf(dev,
|
|
"Correcting VIA config for southbridge data corruption bug\n");
|
|
pci_write_config(children[i], 0x75, 0x80, 1);
|
|
pci_write_config(children[i], 0x76, (reg76 & 0x0f) | 0xd0, 1);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
free(children, M_TEMP);
|
|
}
|
|
|
|
static int
|
|
ata_via_sata_ch_attach(device_t dev)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
if (ata_pci_ch_attach(dev))
|
|
return ENXIO;
|
|
if (ch->unit == 0)
|
|
ch->flags |= ATA_SATA;
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ata_via_sata_getrev(device_t dev, int target)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
if (ch->unit == 0)
|
|
return (1);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ata_via_sata_setmode(device_t dev, int target, int mode)
|
|
{
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
if (ch->unit == 0)
|
|
return (mode);
|
|
return (ata_via_old_setmode(dev, target, mode));
|
|
}
|
|
|
|
ATA_DECLARE_DRIVER(ata_via);
|
|
MODULE_DEPEND(ata_via, ata_ahci, 1, 1, 1);
|