freebsd-dev/sys/boot/forth/loader.conf
Bill Paul 261b9b3066 Add driver support for the Aironet 4500/4800 series wireless 802.11
NICs. (Finally!) The PCMCIA, ISA and PCI varieties are all supported,
though only the ISA and PCI ones will work on the alpha for now.
PCCARD, ISA and PCI attachments are all provided. Also provided an
ancontrol(8) utility for configuring the NIC, man pages, and updated
pccard.conf.sample. ISA cards are supported in both ISA PnP and hard-wired
mode, although you must configure the kernel explicitly to support the
hardwired mode since you have to know the I/O address and port ahead
of time.

Special thanks to Doug Ambrisko for doing the initial newbus hackery
and getting it to work in infrastructure mode.
2000-01-14 20:41:03 +00:00

193 lines
7.4 KiB
Plaintext

# This is loader.conf - a file full of useful variables that you can
# set to change the default load behavior of your system. You should
# not edit this file! Put any overrides into one of the
# loader_conf_files instead and you will be able to update these
# defaults later without spamming your local configuration information.
#
# All arguments must be in double quotes.
#
# $FreeBSD$
##############################################################
### Basic configuration options ############################
##############################################################
exec=".( Loading /boot/defaults/loader.conf ) cr"
kernel="/kernel"
kernel_options=""
userconfig_script_load="NO"
userconfig_script_name="/boot/kernel.conf"
userconfig_script_type="userconfig_script"
loader_conf_files="/boot/loader.conf /boot/loader.conf.local"
verbose_loading="NO" # Set to YES for verbose loader output
##############################################################
### Splash screen configuration ############################
##############################################################
splash_bmp_load="NO" # Set this to YES for bmp splash screen!
splash_pcx_load="NO" # Set this to YES for pcx splash screen!
vesa_load="NO" # Set this to YES to load the vesa module
bitmap_load="NO" # Set this to YES if you want splash screen!
bitmap_name="/boot/splash.bmp" # Set this to the name of the bmp or pcx file
bitmap_type="splash_image_data"
##############################################################
### Loader settings ########################################
##############################################################
#autoboot_delay="10" # Delay in seconds before autobooting
#bootfile="kernel,kernel.old" # Set the default boot file set
#console="vidconsole" # Set the current console
#currdev="disk1s1a" # Set the current device
#module_path="/;/boot;/modules" # Set the module search path
#prompt="\\${interpret}" # Set the command prompt
#root_disk_unit="0" # Force the root disk unit number
#rootdev="disk1s1a" # Set the root filesystem
##############################################################
### Kernel settings ########################################
##############################################################
#boot_askname="NO" # Prompt the user for the name of the root device
#boot_ddb="NO" # Instructs the kernel to start in the DDB debugger
#boot_gdb="NO" # Selects gdb-remote mode for the kernel debugger
#boot_single="NO" # Start system in single-user mode
#boot_userconfig="NO" # Run kernel's interactive device configuration program
#boot_verbose="NO" # Causes extra debugging information to be printed
#init_path="/sbin/init:/sbin/oinit:/sbin/init.bak:/stand/sysinstall"
# Sets the list of init candidates
##############################################################
### Kernel tunables ########################################
##############################################################
#kern.ipc.nmbclusters="" # Set the number of mbuf clusters
#kern.vm.kmem.size="" # Sets the size of kernel memory (bytes)
#machdep.pccard.pcic_irq="0" # Assigns PCCARD controller IRQ (0=polled)
#net.inet.tcp.tcbhashsize="" # Set the value of TCBHASHSIZE
##############################################################
### Filesystem and related modules #########################
##############################################################
# Filesystems
cd9660_load="NO" # ISO 9660 filesystem
coda_load="NO" # CODA filesystem
fdesc_load="NO" # Filedescriptors filesystem
kernfs_load="NO" # Kernel filesystem
mfs_load="NO" # Memory filesystem
msdos_load="NO" # FAT-12/16/32
nfs_load="NO" # NFS
ntfs_load="NO" # NTFS
null_load="NO" # Null filesystem
portal_load="NO" # Portal filesystem
procfs_load="NO" # Process filesystem
umap_load="NO" # User-id map filesystem
union_load="NO" # Union filesystem
# Related stuff
ccd_load="NO" # Concatenated disk driver
vinum_load="NO" # Concatenated/mirror/raid driver
vn_load="NO" # Vnode driver
##############################################################
### Screen saver modules ###################################
##############################################################
# This is best done in rc.conf
screensave_load="NO" # Set to YES to load a screensaver module
screensave_name="green_saver" # Set to the name of the screensaver module
##############################################################
### Emulation modules ######################################
##############################################################
fpu_load="NO" # Floating point emulation
gnufpu_load="NO" # GNU floating point emulation
ibcs2_load="NO" # IBCS2 (SCO) emulation
ibcs2_coff_load="NO"
linux_load="NO" # Linux emulation
svr4_load="NO" # SystemV R4 emulation
streams_load="NO" # System V streams module
##############################################################
### Networking modules #####################################
##############################################################
if_disc_load="NO" # Discard device
if_ppp_load="NO" # Kernel ppp
if_sl_load="NO" # SLIP
if_tun_load="NO" # Tunnel driver (user process ppp)
ipfw_load="NO" # Firewall
##############################################################
### Networking drivers #####################################
##############################################################
miibus_load="NO" # miibus support, needed for some drivers
if_an_load="NO" # Aironet 4500/4800 802.11 wireless NICs
if_dc_load="NO" # DEC/Intel 21143 and various workalikes
if_fxp_load="NO" # Intel EtherExpress PRO/100B (82557, 82558)
if_rl_load="NO" # RealTek 8129/8139
if_sf_load="NO" # Adaptec Duralink PCI (AIC-6915 "starfire")
if_sis_load="NO" # Silicon Integrated Systems SiS 900/7016
if_sk_load="NO" # SysKonnect SK-984x series PCI gigabit ethernet
if_ti_load="NO" # Alteon Networks Tigon 1 and Tigon 2
if_tl_load="NO" # Texas Instruments TNETE100 ("ThunderLAN")
if_vr_load="NO" # VIA Rhine I and Rhine II
if_wb_load="NO" # Winbond W89C840F
if_wi_load="NO" # WaveLAN/IEEE 802.11 wireless NICs
if_xl_load="NO" # 3Com Etherlink XL (3c900, 3c905, 3c905B)
##############################################################
### USB modules ############################################
##############################################################
usb_load="NO" # USB subsystem
ugen_load="NO" # USB generic device, if all else fails ...
uhid_load="NO" # Human Interface Devices
ukbd_load="NO" # Keyboard
ulpt_load="NO" # Printer
ums_load="NO" # Mouse
umass_load="NO" # Mass Storage Devices
if_aue_load="NO" # ADMtek USB ethernet
if_cue_load="NO" # CATC USB ethernet
if_kue_load="NO" # Kawasaki LSI USB ethernet
##############################################################
### Other modules ##########################################
##############################################################
bktr_load="NO" # Brooktree Bt848/Bt878 TV/Video Capture Card
##############################################################
### Module loading syntax example ##########################
##############################################################
#module_load="YES" # loads module "module"
#module_name="realname" # uses "realname" instead of "module"
#module_type="type" # passes "-t type" to load
#module_flags="flags" # passes "flags" to the module
#module_before="cmd" # executes "cmd" before loading the module
#module_after="cmd" # executes "cmd" after loading the module
#module_error="cmd" # executes "cmd" if load fails