freebsd-dev/sys/dev/rtsx/rtsx.c
Jung-uk Kim 926ce35a7e Port rtsx(4) driver for Realtek SD card reader from OpenBSD.
This driver provides support for Realtek PCI SD card readers.  It attaches
mmc(4) bus on card insertion and detaches it on card removal.  It has been
tested with RTS5209, RTS5227, RTS5229, RTS522A, RTS525A and RTL8411B.  It
should also work with RTS5249, RTL8402 and RTL8411.

PR:			204521
Submitted by:		Henri Hennebert (hlh at restart dot be)
Reviewed by:		imp, jkim
Differential Revision:	https://reviews.freebsd.org/D26435
2020-11-24 21:28:44 +00:00

3894 lines
118 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2006 Uwe Stuehler <uwe@openbsd.org>
* Copyright (c) 2012 Stefan Sperling <stsp@openbsd.org>
* Copyright (c) 2020 Henri Hennebert <hlh@restart.be>
* Copyright (c) 2020 Gary Jennejohn <gj@freebsd.org>
* Copyright (c) 2020 Jesper Schmitz Mouridsen <jsm@FreeBSD.org>
* All rights reserved.
*
* Patch from:
* - Lutz Bichler <Lutz.Bichler@gmail.com>
*
* Base on OpenBSD /sys/dev/pci/rtsx_pci.c & /dev/ic/rtsx.c
* on Linux /drivers/mmc/host/rtsx_pci_sdmmc.c,
* /include/linux/rtsx_pci.h &
* /drivers/misc/cardreader/rtsx_pcr.c
* on NetBSD /sys/dev/ic/rtsx.c
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/module.h>
#include <sys/systm.h> /* For FreeBSD 11 */
#include <sys/types.h> /* For FreeBSD 11 */
#include <sys/errno.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <machine/bus.h>
#include <sys/mutex.h>
#include <sys/rman.h>
#include <sys/queue.h>
#include <sys/taskqueue.h>
#include <sys/sysctl.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/mmc/bridge.h>
#include <dev/mmc/mmcreg.h>
#include <dev/mmc/mmcbrvar.h>
#include <machine/_inttypes.h>
#include "opt_mmccam.h"
#ifdef MMCCAM
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_debug.h>
#include <cam/cam_sim.h>
#include <cam/cam_xpt_sim.h>
#endif /* MMCCAM */
#include "rtsxreg.h"
/* The softc holds our per-instance data. */
struct rtsx_softc {
struct mtx rtsx_mtx; /* device mutex */
device_t rtsx_dev; /* device */
uint16_t rtsx_flags; /* device flags */
uint16_t rtsx_device_id; /* device ID */
device_t rtsx_mmc_dev; /* device of mmc bus */
uint32_t rtsx_intr_enabled; /* enabled interrupts */
uint32_t rtsx_intr_status; /* soft interrupt status */
int rtsx_irq_res_id; /* bus IRQ resource id */
struct resource *rtsx_irq_res; /* bus IRQ resource */
void *rtsx_irq_cookie; /* bus IRQ resource cookie */
struct callout rtsx_timeout_callout; /* callout for timeout */
int rtsx_timeout; /* interrupt timeout value */
void (*rtsx_intr_trans_ok)(struct rtsx_softc *sc);
/* function to call if transfer succeed */
void (*rtsx_intr_trans_ko)(struct rtsx_softc *sc);
/* function to call if transfer fail */
struct timeout_task
rtsx_card_insert_task; /* card insert delayed task */
struct task rtsx_card_remove_task; /* card remove task */
int rtsx_res_id; /* bus memory resource id */
struct resource *rtsx_res; /* bus memory resource */
int rtsx_res_type; /* bus memory resource type */
bus_space_tag_t rtsx_btag; /* host register set tag */
bus_space_handle_t rtsx_bhandle; /* host register set handle */
bus_dma_tag_t rtsx_cmd_dma_tag; /* DMA tag for command transfer */
bus_dmamap_t rtsx_cmd_dmamap; /* DMA map for command transfer */
void *rtsx_cmd_dmamem; /* DMA mem for command transfer */
bus_addr_t rtsx_cmd_buffer; /* device visible address of the DMA segment */
int rtsx_cmd_index; /* index in rtsx_cmd_buffer */
bus_dma_tag_t rtsx_data_dma_tag; /* DMA tag for data transfer */
bus_dmamap_t rtsx_data_dmamap; /* DMA map for data transfer */
void *rtsx_data_dmamem; /* DMA mem for data transfer */
bus_addr_t rtsx_data_buffer; /* device visible address of the DMA segment */
#ifdef MMCCAM
struct cam_devq *rtsx_devq; /* CAM queue of requests */
struct cam_sim *rtsx_sim; /* descriptor of our SCSI Interface Modules (SIM) */
struct mtx rtsx_sim_mtx; /* SIM mutex */
union ccb *rtsx_ccb; /* CAM control block */
struct mmc_request rtsx_cam_req; /* CAM MMC request */
#endif /* MMCCAM */
struct mmc_request *rtsx_req; /* MMC request */
struct mmc_host rtsx_host; /* host parameters */
int rtsx_pcie_cap; /* PCIe capability offset */
int8_t rtsx_bus_busy; /* bus busy status */
int8_t rtsx_ios_bus_width; /* current host.ios.bus_width */
int32_t rtsx_ios_clock; /* current host.ios.clock */
int8_t rtsx_ios_power_mode; /* current host.ios.power mode */
int8_t rtsx_ios_timing; /* current host.ios.timing */
int8_t rtsx_ios_vccq; /* current host.ios.vccq */
uint8_t rtsx_read_only; /* card read only status */
uint8_t rtsx_inversion; /* inversion of card detection and read only status */
uint8_t rtsx_force_timing; /* force bus_timing_uhs_sdr50 */
uint8_t rtsx_debug; /* print debugging */
#ifdef MMCCAM
uint8_t rtsx_cam_status; /* CAM status - 1 if card in use */
#endif /* MMCCAM */
uint64_t rtsx_read_count; /* count of read operations */
uint64_t rtsx_write_count; /* count of write operations */
bool rtsx_discovery_mode; /* are we in discovery mode? */
bool rtsx_tuning_mode; /* are we tuning */
bool rtsx_double_clk; /* double clock freqency */
bool rtsx_vpclk; /* voltage at Pulse-width Modulation(PWM) clock? */
uint8_t rtsx_ssc_depth; /* Spread spectrum clocking depth */
uint8_t rtsx_card_drive_sel; /* value for RTSX_CARD_DRIVE_SEL */
uint8_t rtsx_sd30_drive_sel_3v3;/* value for RTSX_SD30_DRIVE_SEL */
};
/* rtsx_flags values */
#define RTSX_F_DEFAULT 0x0000
#define RTSX_F_CARD_PRESENT 0x0001
#define RTSX_F_SDIO_SUPPORT 0x0002
#define RTSX_F_VERSION_A 0x0004
#define RTSX_F_VERSION_B 0x0008
#define RTSX_F_VERSION_C 0x0010
#define RTSX_F_VERSION_D 0x0020
#define RTSX_F_8411B_QFN48 0x0040
#define RTSX_F_REVERSE_SOCKET 0x0080
#define RTSX_REALTEK 0x10ec
#define RTSX_RTS5209 0x5209
#define RTSX_RTS5227 0x5227
#define RTSX_RTS5229 0x5229
#define RTSX_RTS522A 0x522a
#define RTSX_RTS525A 0x525a
#define RTSX_RTS5249 0x5249
#define RTSX_RTL8402 0x5286
#define RTSX_RTL8411 0x5289
#define RTSX_RTL8411B 0x5287
#define RTSX_VERSION "2.0c"
static const struct rtsx_device {
uint16_t vendor_id;
uint16_t device_id;
const char *desc;
} rtsx_devices[] = {
{ RTSX_REALTEK, RTSX_RTS5209, RTSX_VERSION " Realtek RTS5209 PCI MMC/SD Card Reader"},
{ RTSX_REALTEK, RTSX_RTS5227, RTSX_VERSION " Realtek RTS5227 PCI MMC/SD Card Reader"},
{ RTSX_REALTEK, RTSX_RTS5229, RTSX_VERSION " Realtek RTS5229 PCI MMC/SD Card Reader"},
{ RTSX_REALTEK, RTSX_RTS522A, RTSX_VERSION " Realtek RTS522A PCI MMC/SD Card Reader"},
{ RTSX_REALTEK, RTSX_RTS525A, RTSX_VERSION " Realtek RTS525A PCI MMC/SD Card Reader"},
{ RTSX_REALTEK, RTSX_RTS5249, RTSX_VERSION " Realtek RTS5249 PCI MMC/SD Card Reader"},
{ RTSX_REALTEK, RTSX_RTL8402, RTSX_VERSION " Realtek RTL8402 PCI MMC/SD Card Reader"},
{ RTSX_REALTEK, RTSX_RTL8411, RTSX_VERSION " Realtek RTL8411 PCI MMC/SD Card Reader"},
{ RTSX_REALTEK, RTSX_RTL8411B, RTSX_VERSION " Realtek RTL8411B PCI MMC/SD Card Reader"},
{ 0, 0, NULL}
};
static int rtsx_dma_alloc(struct rtsx_softc *sc);
static void rtsx_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error);
static void rtsx_dma_free(struct rtsx_softc *sc);
static void rtsx_intr(void *arg);
static void rtsx_handle_card_present(struct rtsx_softc *sc);
static void rtsx_card_task(void *arg, int pending __unused);
static bool rtsx_is_card_present(struct rtsx_softc *sc);
static int rtsx_init(struct rtsx_softc *sc);
static int rtsx_map_sd_drive(int index);
static int rtsx_rts5227_fill_driving(struct rtsx_softc *sc);
static int rtsx_rts5249_fill_driving(struct rtsx_softc *sc);
static int rtsx_read(struct rtsx_softc *, uint16_t, uint8_t *);
static int rtsx_read_cfg(struct rtsx_softc *sc, uint8_t func, uint16_t addr, uint32_t *val);
static int rtsx_write(struct rtsx_softc *sc, uint16_t addr, uint8_t mask, uint8_t val);
static int rtsx_read_phy(struct rtsx_softc *sc, uint8_t addr, uint16_t *val);
static int rtsx_write_phy(struct rtsx_softc *sc, uint8_t addr, uint16_t val);
static int rtsx_bus_power_off(struct rtsx_softc *sc);
static int rtsx_bus_power_on(struct rtsx_softc *sc);
static int rtsx_set_bus_width(struct rtsx_softc *sc, enum mmc_bus_width width);
static int rtsx_set_sd_timing(struct rtsx_softc *sc, enum mmc_bus_timing timing);
static int rtsx_set_sd_clock(struct rtsx_softc *sc, uint32_t freq);
static int rtsx_stop_sd_clock(struct rtsx_softc *sc);
static int rtsx_switch_sd_clock(struct rtsx_softc *sc, uint8_t clk, uint8_t n, uint8_t div, uint8_t mcu);
static void rtsx_sd_change_tx_phase(struct rtsx_softc *sc, uint8_t sample_point);
static void rtsx_sd_change_rx_phase(struct rtsx_softc *sc, uint8_t sample_point);
static void rtsx_sd_tuning_rx_phase(struct rtsx_softc *sc, uint32_t *phase_map);
static int rtsx_sd_tuning_rx_cmd(struct rtsx_softc *sc, uint8_t sample_point);
static int rtsx_sd_tuning_rx_cmd_wait(struct rtsx_softc *sc, struct mmc_command *cmd);
static void rtsx_sd_tuning_rx_cmd_wakeup(struct rtsx_softc *sc);
static void rtsx_sd_wait_data_idle(struct rtsx_softc *sc);
static uint8_t rtsx_sd_search_final_rx_phase(struct rtsx_softc *sc, uint32_t phase_map);
static int rtsx_sd_get_rx_phase_len(uint32_t phase_map, int start_bit);
#if 0 /* For led */
static int rtsx_led_enable(struct rtsx_softc *sc);
static int rtsx_led_disable(struct rtsx_softc *sc);
#endif /* For led */
static uint8_t rtsx_response_type(uint16_t mmc_rsp);
static void rtsx_init_cmd(struct rtsx_softc *sc, struct mmc_command *cmd);
static void rtsx_push_cmd(struct rtsx_softc *sc, uint8_t cmd, uint16_t reg,
uint8_t mask, uint8_t data);
static void rtsx_set_cmd_data_len(struct rtsx_softc *sc, uint16_t block_cnt, uint16_t byte_cnt);
static void rtsx_send_cmd(struct rtsx_softc *sc);
static void rtsx_ret_resp(struct rtsx_softc *sc);
static void rtsx_set_resp(struct rtsx_softc *sc, struct mmc_command *cmd);
static void rtsx_stop_cmd(struct rtsx_softc *sc);
static void rtsx_clear_error(struct rtsx_softc *sc);
static void rtsx_req_done(struct rtsx_softc *sc);
static int rtsx_send_req(struct rtsx_softc *sc, struct mmc_command *cmd);
static int rtsx_xfer_short(struct rtsx_softc *sc, struct mmc_command *cmd);
static void rtsx_ask_ppbuf_part1(struct rtsx_softc *sc);
static void rtsx_get_ppbuf_part1(struct rtsx_softc *sc);
static void rtsx_get_ppbuf_part2(struct rtsx_softc *sc);
static void rtsx_put_ppbuf_part1(struct rtsx_softc *sc);
static void rtsx_put_ppbuf_part2(struct rtsx_softc *sc);
static void rtsx_write_ppbuf(struct rtsx_softc *sc);
static int rtsx_xfer(struct rtsx_softc *sc, struct mmc_command *cmd);
static void rtsx_xfer_begin(struct rtsx_softc *sc);
static void rtsx_xfer_start(struct rtsx_softc *sc);
static void rtsx_xfer_finish(struct rtsx_softc *sc);
static void rtsx_timeout(void *arg);
#ifdef MMCCAM
static void rtsx_cam_action(struct cam_sim *sim, union ccb *ccb);
static void rtsx_cam_poll(struct cam_sim *sim);
static void rtsx_cam_set_tran_settings(struct rtsx_softc *sc, union ccb *ccb);
static void rtsx_cam_request(struct rtsx_softc *sc, union ccb *ccb);
#endif /* MMCCAM */
static int rtsx_read_ivar(device_t bus, device_t child, int which, uintptr_t *result);
static int rtsx_write_ivar(device_t bus, device_t child, int which, uintptr_t value);
static int rtsx_mmcbr_update_ios(device_t bus, device_t child __unused);
static int rtsx_mmcbr_switch_vccq(device_t bus, device_t child __unused);
static int rtsx_mmcbr_tune(device_t bus, device_t child __unused, bool hs400 __unused);
static int rtsx_mmcbr_retune(device_t bus, device_t child __unused, bool reset __unused);
static int rtsx_mmcbr_request(device_t bus, device_t child __unused, struct mmc_request *req);
static int rtsx_mmcbr_get_ro(device_t bus, device_t child __unused);
static int rtsx_mmcbr_acquire_host(device_t bus, device_t child __unused);
static int rtsx_mmcbr_release_host(device_t bus, device_t child __unused);
static int rtsx_probe(device_t dev);
static int rtsx_attach(device_t dev);
static int rtsx_detach(device_t dev);
static int rtsx_shutdown(device_t dev);
static int rtsx_suspend(device_t dev);
static int rtsx_resume(device_t dev);
#define RTSX_LOCK_INIT(_sc) mtx_init(&(_sc)->rtsx_mtx, \
device_get_nameunit(sc->rtsx_dev), "rtsx", MTX_DEF)
#define RTSX_LOCK(_sc) mtx_lock(&(_sc)->rtsx_mtx)
#define RTSX_UNLOCK(_sc) mtx_unlock(&(_sc)->rtsx_mtx)
#define RTSX_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->rtsx_mtx)
#define RTSX_SDCLK_OFF 0
#define RTSX_SDCLK_250KHZ 250000
#define RTSX_SDCLK_400KHZ 400000
#define RTSX_SDCLK_25MHZ 25000000
#define RTSX_SDCLK_50MHZ 50000000
#define RTSX_SDCLK_100MHZ 100000000
#define RTSX_SDCLK_208MHZ 208000000
#define RTSX_MIN_DIV_N 80
#define RTSX_MAX_DIV_N 208
#define RTSX_MAX_DATA_BLKLEN 512
#define RTSX_DMA_ALIGN 4
#define RTSX_HOSTCMD_MAX 256
#define RTSX_DMA_CMD_BIFSIZE (sizeof(uint32_t) * RTSX_HOSTCMD_MAX)
#define RTSX_DMA_DATA_BUFSIZE MAXPHYS
#define ISSET(t, f) ((t) & (f))
#define READ4(sc, reg) \
(bus_space_read_4((sc)->rtsx_btag, (sc)->rtsx_bhandle, (reg)))
#define WRITE4(sc, reg, val) \
(bus_space_write_4((sc)->rtsx_btag, (sc)->rtsx_bhandle, (reg), (val)))
#define RTSX_READ(sc, reg, val) \
do { \
int err = rtsx_read((sc), (reg), (val)); \
if (err) \
return (err); \
} while (0)
#define RTSX_WRITE(sc, reg, val) \
do { \
int err = rtsx_write((sc), (reg), 0xff, (val)); \
if (err) \
return (err); \
} while (0)
#define RTSX_CLR(sc, reg, bits) \
do { \
int err = rtsx_write((sc), (reg), (bits), 0); \
if (err) \
return (err); \
} while (0)
#define RTSX_SET(sc, reg, bits) \
do { \
int err = rtsx_write((sc), (reg), (bits), 0xff);\
if (err) \
return (err); \
} while (0)
#define RTSX_BITOP(sc, reg, mask, bits) \
do { \
int err = rtsx_write((sc), (reg), (mask), (bits)); \
if (err) \
return (err); \
} while (0)
/*
* We use two DMA buffers: a command buffer and a data buffer.
*
* The command buffer contains a command queue for the host controller,
* which describes SD/MMC commands to run, and other parameters. The chip
* runs the command queue when a special bit in the RTSX_HCBAR register is
* set and signals completion with the RTSX_TRANS_OK_INT interrupt.
* Each command is encoded as a 4 byte sequence containing command number
* (read, write, or check a host controller register), a register address,
* and a data bit-mask and value.
* SD/MMC commands which do not transfer any data from/to the card only use
* the command buffer.
*
* The data buffer is used for transfer longer than 512. Data transfer is
* controlled via the RTSX_HDBAR register and completion is signalled by
* the RTSX_TRANS_OK_INT interrupt.
*
* The chip is unable to perform DMA above 4GB.
*/
/*
* Main commands in the usual seqence used:
*
* CMD0 Go idle state
* CMD8 Send interface condition
* CMD55 Application Command for next ACMD
* ACMD41 Send Operation Conditions Register (OCR: voltage profile of the card)
* CMD2 Send Card Identification (CID) Register
* CMD3 Send relative address
* CMD9 Send Card Specific Data (CSD)
* CMD13 Send status (32 bits - bit 25: card password protected)
* CMD7 Select card (before Get card SCR)
* ACMD51 Send SCR (SD CARD Configuration Register - [51:48]: Bus widths supported)
* CMD6 SD switch function
* ACMD13 Send SD status (512 bits)
* ACMD42 Set/Clear card detect
* ACMD6 Set bus width
* CMD19 Send tuning block
* CMD12 Stop transmission
*
* CMD17 Read single block (<=512)
* CMD18 Read multiple blocks (>512)
* CMD24 Write single block (<=512)
* CMD25 Write multiple blocks (>512)
*
* CMD52 IO R/W direct
* CMD5 Send Operation Conditions
*/
static int
rtsx_dma_alloc(struct rtsx_softc *sc)
{
int error = 0;
error = bus_dma_tag_create(bus_get_dma_tag(sc->rtsx_dev), /* inherit from parent */
RTSX_DMA_ALIGN, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
RTSX_DMA_CMD_BIFSIZE, 1, /* maxsize, nsegments */
RTSX_DMA_CMD_BIFSIZE, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->rtsx_cmd_dma_tag);
if (error) {
device_printf(sc->rtsx_dev,
"Can't create cmd parent DMA tag\n");
return (error);
}
error = bus_dmamem_alloc(sc->rtsx_cmd_dma_tag, /* DMA tag */
&sc->rtsx_cmd_dmamem, /* will hold the KVA pointer */
BUS_DMA_COHERENT | BUS_DMA_WAITOK | BUS_DMA_ZERO, /* flags */
&sc->rtsx_cmd_dmamap); /* DMA map */
if (error) {
device_printf(sc->rtsx_dev,
"Can't create DMA map for command transfer\n");
goto destroy_cmd_dma_tag;
}
error = bus_dmamap_load(sc->rtsx_cmd_dma_tag, /* DMA tag */
sc->rtsx_cmd_dmamap, /* DMA map */
sc->rtsx_cmd_dmamem, /* KVA pointer to be mapped */
RTSX_DMA_CMD_BIFSIZE, /* size of buffer */
rtsx_dmamap_cb, /* callback */
&sc->rtsx_cmd_buffer, /* first arg of callback */
0); /* flags */
if (error || sc->rtsx_cmd_buffer == 0) {
device_printf(sc->rtsx_dev,
"Can't load DMA memory for command transfer\n");
error = (error) ? error : EFAULT;
goto destroy_cmd_dmamem_alloc;
}
error = bus_dma_tag_create(bus_get_dma_tag(sc->rtsx_dev), /* inherit from parent */
RTSX_DMA_DATA_BUFSIZE, 0, /* alignment, boundary */
BUS_SPACE_MAXADDR_32BIT, /* lowaddr */
BUS_SPACE_MAXADDR, /* highaddr */
NULL, NULL, /* filter, filterarg */
RTSX_DMA_DATA_BUFSIZE, 1, /* maxsize, nsegments */
RTSX_DMA_DATA_BUFSIZE, /* maxsegsize */
0, /* flags */
NULL, NULL, /* lockfunc, lockarg */
&sc->rtsx_data_dma_tag);
if (error) {
device_printf(sc->rtsx_dev,
"Can't create data parent DMA tag\n");
goto destroy_cmd_dmamap_load;
}
error = bus_dmamem_alloc(sc->rtsx_data_dma_tag, /* DMA tag */
&sc->rtsx_data_dmamem, /* will hold the KVA pointer */
BUS_DMA_WAITOK | BUS_DMA_ZERO, /* flags */
&sc->rtsx_data_dmamap); /* DMA map */
if (error) {
device_printf(sc->rtsx_dev,
"Can't create DMA map for data transfer\n");
goto destroy_data_dma_tag;
}
error = bus_dmamap_load(sc->rtsx_data_dma_tag, /* DMA tag */
sc->rtsx_data_dmamap, /* DMA map */
sc->rtsx_data_dmamem, /* KVA pointer to be mapped */
RTSX_DMA_DATA_BUFSIZE, /* size of buffer */
rtsx_dmamap_cb, /* callback */
&sc->rtsx_data_buffer, /* first arg of callback */
0); /* flags */
if (error || sc->rtsx_data_buffer == 0) {
device_printf(sc->rtsx_dev,
"Can't load DMA memory for data transfer\n");
error = (error) ? error : EFAULT;
goto destroy_data_dmamem_alloc;
}
return (error);
destroy_data_dmamem_alloc:
bus_dmamem_free(sc->rtsx_data_dma_tag, sc->rtsx_data_dmamem, sc->rtsx_data_dmamap);
destroy_data_dma_tag:
bus_dma_tag_destroy(sc->rtsx_data_dma_tag);
destroy_cmd_dmamap_load:
bus_dmamap_unload(sc->rtsx_cmd_dma_tag, sc->rtsx_cmd_dmamap);
destroy_cmd_dmamem_alloc:
bus_dmamem_free(sc->rtsx_cmd_dma_tag, sc->rtsx_cmd_dmamem, sc->rtsx_cmd_dmamap);
destroy_cmd_dma_tag:
bus_dma_tag_destroy(sc->rtsx_cmd_dma_tag);
return (error);
}
static void
rtsx_dmamap_cb(void *arg, bus_dma_segment_t *segs, int nsegs, int error)
{
if (error) {
printf("rtsx_dmamap_cb: error %d\n", error);
return;
}
*(bus_addr_t *)arg = segs[0].ds_addr;
}
static void
rtsx_dma_free(struct rtsx_softc *sc)
{
if (sc->rtsx_cmd_dma_tag != NULL) {
if (sc->rtsx_cmd_dmamap != NULL)
bus_dmamap_unload(sc->rtsx_cmd_dma_tag,
sc->rtsx_cmd_dmamap);
if (sc->rtsx_cmd_dmamem != NULL)
bus_dmamem_free(sc->rtsx_cmd_dma_tag,
sc->rtsx_cmd_dmamem,
sc->rtsx_cmd_dmamap);
sc->rtsx_cmd_dmamap = NULL;
sc->rtsx_cmd_dmamem = NULL;
sc->rtsx_cmd_buffer = 0;
bus_dma_tag_destroy(sc->rtsx_cmd_dma_tag);
sc->rtsx_cmd_dma_tag = NULL;
}
if (sc->rtsx_data_dma_tag != NULL) {
if (sc->rtsx_data_dmamap != NULL)
bus_dmamap_unload(sc->rtsx_data_dma_tag,
sc->rtsx_data_dmamap);
if (sc->rtsx_data_dmamem != NULL)
bus_dmamem_free(sc->rtsx_data_dma_tag,
sc->rtsx_data_dmamem,
sc->rtsx_data_dmamap);
sc->rtsx_data_dmamap = NULL;
sc->rtsx_data_dmamem = NULL;
sc->rtsx_data_buffer = 0;
bus_dma_tag_destroy(sc->rtsx_data_dma_tag);
sc->rtsx_data_dma_tag = NULL;
}
}
static void
rtsx_intr(void *arg)
{
struct rtsx_softc *sc = arg;
uint32_t enabled;
uint32_t status;
RTSX_LOCK(sc);
enabled = sc->rtsx_intr_enabled;
status = READ4(sc, RTSX_BIPR); /* read Bus Interrupt Pending Register */
sc->rtsx_intr_status = status;
if (bootverbose)
device_printf(sc->rtsx_dev, "Interrupt handler - enabled: 0x%08x, status: 0x%08x\n", enabled, status);
/* Ack interrupts. */
WRITE4(sc, RTSX_BIPR, status);
if (((enabled & status) == 0) || status == 0xffffffff) {
device_printf(sc->rtsx_dev, "Spurious interrupt - enabled: 0x%08x, status: 0x%08x\n", enabled, status);
RTSX_UNLOCK(sc);
return;
}
/* Detect write protect. */
if (status & RTSX_SD_WRITE_PROTECT)
sc->rtsx_read_only = 1;
else
sc->rtsx_read_only = 0;
/* Start task to handle SD card status change (from dwmmc.c). */
if (status & RTSX_SD_INT) {
device_printf(sc->rtsx_dev, "Interrupt card inserted/removed\n");
rtsx_handle_card_present(sc);
}
if (sc->rtsx_req == NULL) {
RTSX_UNLOCK(sc);
return;
}
if (status & RTSX_TRANS_OK_INT) {
sc->rtsx_req->cmd->error = MMC_ERR_NONE;
if (sc->rtsx_intr_trans_ok != NULL)
sc->rtsx_intr_trans_ok(sc);
} else if (status & RTSX_TRANS_FAIL_INT) {
uint8_t stat1;
sc->rtsx_req->cmd->error = MMC_ERR_FAILED;
if (rtsx_read(sc, RTSX_SD_STAT1, &stat1) == 0 &&
(stat1 & RTSX_SD_CRC_ERR)) {
device_printf(sc->rtsx_dev, "CRC error\n");
sc->rtsx_req->cmd->error = MMC_ERR_BADCRC;
}
if (!sc->rtsx_tuning_mode)
device_printf(sc->rtsx_dev, "Transfer fail - status: 0x%08x\n", status);
rtsx_stop_cmd(sc);
if (sc->rtsx_intr_trans_ko != NULL)
sc->rtsx_intr_trans_ko(sc);
}
RTSX_UNLOCK(sc);
}
/*
* Function called from the IRQ handler (from dwmmc.c).
*/
static void
rtsx_handle_card_present(struct rtsx_softc *sc)
{
bool was_present;
bool is_present;
#ifdef MMCCAM
was_present = sc->rtsx_cam_status;
#else
was_present = sc->rtsx_mmc_dev != NULL;
#endif /* MMCCAM */
is_present = rtsx_is_card_present(sc);
if (is_present)
device_printf(sc->rtsx_dev, "Card present\n");
else
device_printf(sc->rtsx_dev, "Card absent\n");
if (!was_present && is_present) {
/*
* The delay is to debounce the card insert
* (sometimes the card detect pin stabilizes
* before the other pins have made good contact).
*/
taskqueue_enqueue_timeout(taskqueue_swi_giant,
&sc->rtsx_card_insert_task, -hz);
} else if (was_present && !is_present) {
taskqueue_enqueue(taskqueue_swi_giant, &sc->rtsx_card_remove_task);
}
}
/*
* This funtion is called at startup.
*/
static void
rtsx_card_task(void *arg, int pending __unused)
{
struct rtsx_softc *sc = arg;
RTSX_LOCK(sc);
if (rtsx_is_card_present(sc)) {
sc->rtsx_flags |= RTSX_F_CARD_PRESENT;
/* Card is present, attach if necessary. */
#ifdef MMCCAM
if (sc->rtsx_cam_status == 0) {
union ccb *ccb;
uint32_t pathid;
#else
if (sc->rtsx_mmc_dev == NULL) {
#endif /* MMCCAM */
if (bootverbose)
device_printf(sc->rtsx_dev, "Card inserted\n");
sc->rtsx_read_count = sc->rtsx_write_count = 0;
#ifdef MMCCAM
sc->rtsx_cam_status = 1;
pathid = cam_sim_path(sc->rtsx_sim);
ccb = xpt_alloc_ccb_nowait();
if (ccb == NULL) {
device_printf(sc->rtsx_dev, "Unable to alloc CCB for rescan\n");
RTSX_UNLOCK(sc);
return;
}
/*
* We create a rescan request for BUS:0:0, since the card
* will be at lun 0.
*/
if (xpt_create_path(&ccb->ccb_h.path, NULL, pathid,
/* target */ 0, /* lun */ 0) != CAM_REQ_CMP) {
device_printf(sc->rtsx_dev, "Unable to create path for rescan\n");
RTSX_UNLOCK(sc);
xpt_free_ccb(ccb);
return;
}
RTSX_UNLOCK(sc);
xpt_rescan(ccb);
#else
sc->rtsx_mmc_dev = device_add_child(sc->rtsx_dev, "mmc", -1);
RTSX_UNLOCK(sc);
if (sc->rtsx_mmc_dev == NULL) {
device_printf(sc->rtsx_dev, "Adding MMC bus failed\n");
} else {
device_set_ivars(sc->rtsx_mmc_dev, sc);
device_probe_and_attach(sc->rtsx_mmc_dev);
}
#endif /* MMCCAM */
} else
RTSX_UNLOCK(sc);
} else {
sc->rtsx_flags &= ~RTSX_F_CARD_PRESENT;
/* Card isn't present, detach if necessary. */
#ifdef MMCCAM
if (sc->rtsx_cam_status != 0) {
union ccb *ccb;
uint32_t pathid;
#else
if (sc->rtsx_mmc_dev != NULL) {
#endif /* MMCCAM */
if (bootverbose)
device_printf(sc->rtsx_dev, "Card removed\n");
if (sc->rtsx_debug)
device_printf(sc->rtsx_dev, "Read count: %" PRIu64 ", write count: %" PRIu64 "\n",
sc->rtsx_read_count, sc->rtsx_write_count);
#ifdef MMCCAM
sc->rtsx_cam_status = 0;
pathid = cam_sim_path(sc->rtsx_sim);
ccb = xpt_alloc_ccb_nowait();
if (ccb == NULL) {
device_printf(sc->rtsx_dev, "Unable to alloc CCB for rescan\n");
RTSX_UNLOCK(sc);
return;
}
/*
* We create a rescan request for BUS:0:0, since the card
* will be at lun 0.
*/
if (xpt_create_path(&ccb->ccb_h.path, NULL, pathid,
/* target */ 0, /* lun */ 0) != CAM_REQ_CMP) {
device_printf(sc->rtsx_dev, "Unable to create path for rescan\n");
RTSX_UNLOCK(sc);
xpt_free_ccb(ccb);
return;
}
RTSX_UNLOCK(sc);
xpt_rescan(ccb);
#else
RTSX_UNLOCK(sc);
if (device_delete_child(sc->rtsx_dev, sc->rtsx_mmc_dev))
device_printf(sc->rtsx_dev, "Detaching MMC bus failed\n");
sc->rtsx_mmc_dev = NULL;
#endif /* MMCCAM */
} else
RTSX_UNLOCK(sc);
}
}
static bool
rtsx_is_card_present(struct rtsx_softc *sc)
{
uint32_t status;
status = READ4(sc, RTSX_BIPR);
if (sc->rtsx_inversion == 0)
return (status & RTSX_SD_EXIST);
else
return !(status & RTSX_SD_EXIST);
}
static int
rtsx_init(struct rtsx_softc *sc)
{
bool rtsx_init_debug = false;
uint8_t version;
uint8_t val;
int error;
sc->rtsx_host.host_ocr = RTSX_SUPPORTED_VOLTAGE;
sc->rtsx_host.f_min = RTSX_SDCLK_250KHZ;
sc->rtsx_host.f_max = RTSX_SDCLK_208MHZ;
sc->rtsx_host.caps = MMC_CAP_4_BIT_DATA | MMC_CAP_HSPEED |
MMC_CAP_UHS_SDR12 | MMC_CAP_UHS_SDR25;
sc->rtsx_host.caps |= MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR104;
if (sc->rtsx_device_id == RTSX_RTS5209)
sc->rtsx_host.caps |= MMC_CAP_8_BIT_DATA;
pci_find_cap(sc->rtsx_dev, PCIY_EXPRESS, &(sc->rtsx_pcie_cap));
/*
* Check IC version.
*/
switch (sc->rtsx_device_id) {
case RTSX_RTS5229:
/* Read IC version from dummy register. */
RTSX_READ(sc, RTSX_DUMMY_REG, &version);
if ((version & 0x0F) == RTSX_IC_VERSION_C)
sc->rtsx_flags |= RTSX_F_VERSION_C;
break;
case RTSX_RTS522A:
/* Read IC version from dummy register. */
RTSX_READ(sc, RTSX_DUMMY_REG, &version);
if ((version & 0x0F) == RTSX_IC_VERSION_A)
sc->rtsx_flags |= RTSX_F_VERSION_A;
break;
case RTSX_RTS525A:
/* Read IC version from dummy register. */
RTSX_READ(sc, RTSX_DUMMY_REG, &version);
if ((version & 0x0F) == RTSX_IC_VERSION_A)
sc->rtsx_flags |= RTSX_F_VERSION_A;
break;
case RTSX_RTL8411B:
RTSX_READ(sc, RTSX_RTL8411B_PACKAGE, &version);
if (version & RTSX_RTL8411B_QFN48)
sc->rtsx_flags |= RTSX_F_8411B_QFN48;
break;
}
/*
* Fetch vendor settings.
*/
/*
* Normally OEMs will set vendor setting to the config space
* of Realtek card reader in BIOS stage. This statement reads
* the setting and configure the internal registers according
* to it, to improve card reader's compatibility condition.
*/
sc->rtsx_card_drive_sel = RTSX_CARD_DRIVE_DEFAULT;
switch (sc->rtsx_device_id) {
uint32_t reg;
uint32_t reg1;
uint8_t reg3;
case RTSX_RTS5209:
sc->rtsx_card_drive_sel = RTSX_RTS5209_CARD_DRIVE_DEFAULT;
sc->rtsx_sd30_drive_sel_3v3 = RTSX_DRIVER_TYPE_D;
reg = pci_read_config(sc->rtsx_dev, RTSX_PCR_SETTING_REG2, 4);
if (!(reg & 0x80)) {
sc->rtsx_card_drive_sel = (reg >> 8) & 0x3F;
sc->rtsx_sd30_drive_sel_3v3 = reg & 0x07;
} else {
device_printf(sc->rtsx_dev, "pci_read_config() error - reg: 0x%08x\n", reg);
}
if (bootverbose || rtsx_init_debug)
device_printf(sc->rtsx_dev, "card_drive_sel: 0x%02x, sd30_drive_sel_3v3: 0x%02x\n",
sc->rtsx_card_drive_sel, sc->rtsx_sd30_drive_sel_3v3);
break;
case RTSX_RTS5227:
case RTSX_RTS522A:
sc->rtsx_sd30_drive_sel_3v3 = RTSX_CFG_DRIVER_TYPE_B;
reg = pci_read_config(sc->rtsx_dev, RTSX_PCR_SETTING_REG1, 4);
if (!(reg & 0x1000000)) {
sc->rtsx_card_drive_sel &= 0x3F;
sc->rtsx_card_drive_sel |= ((reg >> 25) & 0x01) << 6;
reg = pci_read_config(sc->rtsx_dev, RTSX_PCR_SETTING_REG2, 4);
sc->rtsx_sd30_drive_sel_3v3 = (reg >> 5) & 0x03;
if (reg & 0x4000)
sc->rtsx_flags |= RTSX_F_REVERSE_SOCKET;
} else {
device_printf(sc->rtsx_dev, "pci_read_config() error - reg: 0x%08x\n", reg);
}
if (bootverbose || rtsx_init_debug)
device_printf(sc->rtsx_dev,
"card_drive_sel: 0x%02x, sd30_drive_sel_3v3: 0x%02x, reverse_socket is %s\n",
sc->rtsx_card_drive_sel, sc->rtsx_sd30_drive_sel_3v3,
(sc->rtsx_flags & RTSX_F_REVERSE_SOCKET) ? "true" : "false");
break;
case RTSX_RTS5229:
sc->rtsx_sd30_drive_sel_3v3 = RTSX_DRIVER_TYPE_D;
reg = pci_read_config(sc->rtsx_dev, RTSX_PCR_SETTING_REG1, 4);
if (!(reg & 0x1000000)) {
sc->rtsx_card_drive_sel &= 0x3F;
sc->rtsx_card_drive_sel |= ((reg >> 25) & 0x01) << 6;
reg = pci_read_config(sc->rtsx_dev, RTSX_PCR_SETTING_REG2, 4);
sc->rtsx_sd30_drive_sel_3v3 = rtsx_map_sd_drive((reg >> 5) & 0x03);
} else {
device_printf(sc->rtsx_dev, "pci_read_config() error - reg: 0x%08x\n", reg);
}
if (bootverbose || rtsx_init_debug)
device_printf(sc->rtsx_dev, "card_drive_sel: 0x%02x, sd30_drive_sel_3v3: 0x%02x\n",
sc->rtsx_card_drive_sel, sc->rtsx_sd30_drive_sel_3v3);
break;
case RTSX_RTS525A:
case RTSX_RTS5249:
sc->rtsx_sd30_drive_sel_3v3 = RTSX_CFG_DRIVER_TYPE_B;
reg = pci_read_config(sc->rtsx_dev, RTSX_PCR_SETTING_REG1, 4);
if ((reg & 0x1000000)) {
sc->rtsx_card_drive_sel &= 0x3F;
sc->rtsx_card_drive_sel |= ((reg >> 25) & 0x01) << 6;
reg = pci_read_config(sc->rtsx_dev, RTSX_PCR_SETTING_REG2, 4);
sc->rtsx_sd30_drive_sel_3v3 = (reg >> 5) & 0x03;
if (reg & 0x4000)
sc->rtsx_flags |= RTSX_F_REVERSE_SOCKET;
} else {
device_printf(sc->rtsx_dev, "pci_read_config() error - reg: 0x%08x\n", reg);
}
if (bootverbose || rtsx_init_debug)
device_printf(sc->rtsx_dev,
"card_drive_sel = 0x%02x, sd30_drive_sel_3v3: 0x%02x, reverse_socket is %s\n",
sc->rtsx_card_drive_sel, sc->rtsx_sd30_drive_sel_3v3,
(sc->rtsx_flags & RTSX_F_REVERSE_SOCKET) ? "true" : "false");
break;
case RTSX_RTL8402:
case RTSX_RTL8411:
sc->rtsx_card_drive_sel = RTSX_RTL8411_CARD_DRIVE_DEFAULT;
sc->rtsx_sd30_drive_sel_3v3 = RTSX_DRIVER_TYPE_D;
reg1 = pci_read_config(sc->rtsx_dev, RTSX_PCR_SETTING_REG1, 4);
if (reg1 & 0x1000000) {
sc->rtsx_card_drive_sel &= 0x3F;
sc->rtsx_card_drive_sel |= ((reg1 >> 25) & 0x01) << 6;
reg3 = pci_read_config(sc->rtsx_dev, RTSX_PCR_SETTING_REG3, 1);
sc->rtsx_sd30_drive_sel_3v3 = (reg3 >> 5) & 0x07;
} else {
device_printf(sc->rtsx_dev, "pci_read_config() error - reg1: 0x%08x\n", reg1);
}
if (bootverbose || rtsx_init_debug)
device_printf(sc->rtsx_dev,
"card_drive_sel: 0x%02x, sd30_drive_sel_3v3: 0x%02x\n",
sc->rtsx_card_drive_sel, sc->rtsx_sd30_drive_sel_3v3);
break;
case RTSX_RTL8411B:
sc->rtsx_card_drive_sel = RTSX_RTL8411_CARD_DRIVE_DEFAULT;
sc->rtsx_sd30_drive_sel_3v3 = RTSX_DRIVER_TYPE_D;
reg = pci_read_config(sc->rtsx_dev, RTSX_PCR_SETTING_REG1, 4);
if (!(reg & 0x1000000)) {
sc->rtsx_sd30_drive_sel_3v3 = rtsx_map_sd_drive(reg & 0x03);
} else {
device_printf(sc->rtsx_dev, "pci_read_config() error - reg: 0x%08x\n", reg);
}
if (bootverbose || rtsx_init_debug)
device_printf(sc->rtsx_dev,
"card_drive_sel: 0x%02x, sd30_drive_sel_3v3: 0x%02x\n",
sc->rtsx_card_drive_sel, sc->rtsx_sd30_drive_sel_3v3);
break;
}
if (bootverbose || rtsx_init_debug)
device_printf(sc->rtsx_dev, "rtsx_init() rtsx_flags: 0x%04x\n", sc->rtsx_flags);
/* Enable interrupts. */
sc->rtsx_intr_enabled = RTSX_TRANS_OK_INT_EN | RTSX_TRANS_FAIL_INT_EN | RTSX_SD_INT_EN | RTSX_MS_INT_EN;
WRITE4(sc, RTSX_BIER, sc->rtsx_intr_enabled);
/* Power on SSC clock. */
RTSX_CLR(sc, RTSX_FPDCTL, RTSX_SSC_POWER_DOWN);
/* Wait SSC power stable. */
DELAY(200);
/* Disable ASPM */
val = pci_read_config(sc->rtsx_dev, sc->rtsx_pcie_cap + PCIER_LINK_CTL, 1);
pci_write_config(sc->rtsx_dev, sc->rtsx_pcie_cap + PCIER_LINK_CTL, val & 0xfc, 1);
/*
* Optimize phy.
*/
switch (sc->rtsx_device_id) {
case RTSX_RTS5209:
/* Some magic numbers from Linux driver. */
if ((error = rtsx_write_phy(sc, 0x00, 0xB966)))
return (error);
break;
case RTSX_RTS5227:
RTSX_CLR(sc, RTSX_PM_CTRL3, RTSX_D3_DELINK_MODE_EN);
/* Optimize RX sensitivity. */
if ((error = rtsx_write_phy(sc, 0x00, 0xBA42)))
return (error);
break;
case RTSX_RTS5229:
/* Optimize RX sensitivity. */
if ((error = rtsx_write_phy(sc, 0x00, 0xBA42)))
return (error);
break;
case RTSX_RTS522A:
RTSX_CLR(sc, RTSX_RTS522A_PM_CTRL3, RTSX_D3_DELINK_MODE_EN);
if (sc->rtsx_flags & RTSX_F_VERSION_A) {
if ((error = rtsx_write_phy(sc, RTSX_PHY_RCR2, RTSX_PHY_RCR2_INIT_27S)))
return (error);
}
if ((error = rtsx_write_phy(sc, RTSX_PHY_RCR1, RTSX_PHY_RCR1_INIT_27S)))
return (error);
if ((error = rtsx_write_phy(sc, RTSX_PHY_FLD0, RTSX_PHY_FLD0_INIT_27S)))
return (error);
if ((error = rtsx_write_phy(sc, RTSX_PHY_FLD3, RTSX_PHY_FLD3_INIT_27S)))
return (error);
if ((error = rtsx_write_phy(sc, RTSX_PHY_FLD4, RTSX_PHY_FLD4_INIT_27S)))
return (error);
break;
case RTSX_RTS525A:
if ((error = rtsx_write_phy(sc, RTSX__PHY_FLD0,
RTSX__PHY_FLD0_CLK_REQ_20C | RTSX__PHY_FLD0_RX_IDLE_EN |
RTSX__PHY_FLD0_BIT_ERR_RSTN | RTSX__PHY_FLD0_BER_COUNT |
RTSX__PHY_FLD0_BER_TIMER | RTSX__PHY_FLD0_CHECK_EN)))
return (error);
if ((error = rtsx_write_phy(sc, RTSX__PHY_ANA03,
RTSX__PHY_ANA03_TIMER_MAX | RTSX__PHY_ANA03_OOBS_DEB_EN |
RTSX__PHY_CMU_DEBUG_EN)))
return (error);
if (sc->rtsx_flags & RTSX_F_VERSION_A)
if ((error = rtsx_write_phy(sc, RTSX__PHY_REV0,
RTSX__PHY_REV0_FILTER_OUT | RTSX__PHY_REV0_CDR_BYPASS_PFD |
RTSX__PHY_REV0_CDR_RX_IDLE_BYPASS)))
return (error);
break;
case RTSX_RTS5249:
RTSX_CLR(sc, RTSX_PM_CTRL3, RTSX_D3_DELINK_MODE_EN);
if ((error = rtsx_write_phy(sc, RTSX_PHY_REV,
RTSX_PHY_REV_RESV | RTSX_PHY_REV_RXIDLE_LATCHED |
RTSX_PHY_REV_P1_EN | RTSX_PHY_REV_RXIDLE_EN |
RTSX_PHY_REV_CLKREQ_TX_EN | RTSX_PHY_REV_RX_PWST |
RTSX_PHY_REV_CLKREQ_DT_1_0 | RTSX_PHY_REV_STOP_CLKRD |
RTSX_PHY_REV_STOP_CLKWR)))
return (error);
DELAY(10);
if ((error = rtsx_write_phy(sc, RTSX_PHY_BPCR,
RTSX_PHY_BPCR_IBRXSEL | RTSX_PHY_BPCR_IBTXSEL |
RTSX_PHY_BPCR_IB_FILTER | RTSX_PHY_BPCR_CMIRROR_EN)))
return (error);
if ((error = rtsx_write_phy(sc, RTSX_PHY_PCR,
RTSX_PHY_PCR_FORCE_CODE | RTSX_PHY_PCR_OOBS_CALI_50 |
RTSX_PHY_PCR_OOBS_VCM_08 | RTSX_PHY_PCR_OOBS_SEN_90 |
RTSX_PHY_PCR_RSSI_EN | RTSX_PHY_PCR_RX10K)))
return (error);
if ((error = rtsx_write_phy(sc, RTSX_PHY_RCR2,
RTSX_PHY_RCR2_EMPHASE_EN | RTSX_PHY_RCR2_NADJR |
RTSX_PHY_RCR2_CDR_SR_2 | RTSX_PHY_RCR2_FREQSEL_12 |
RTSX_PHY_RCR2_CDR_SC_12P | RTSX_PHY_RCR2_CALIB_LATE)))
return (error);
if ((error = rtsx_write_phy(sc, RTSX_PHY_FLD4,
RTSX_PHY_FLD4_FLDEN_SEL | RTSX_PHY_FLD4_REQ_REF |
RTSX_PHY_FLD4_RXAMP_OFF | RTSX_PHY_FLD4_REQ_ADDA |
RTSX_PHY_FLD4_BER_COUNT | RTSX_PHY_FLD4_BER_TIMER |
RTSX_PHY_FLD4_BER_CHK_EN)))
return (error);
if ((error = rtsx_write_phy(sc, RTSX_PHY_RDR,
RTSX_PHY_RDR_RXDSEL_1_9 | RTSX_PHY_SSC_AUTO_PWD)))
return (error);
if ((error = rtsx_write_phy(sc, RTSX_PHY_RCR1,
RTSX_PHY_RCR1_ADP_TIME_4 | RTSX_PHY_RCR1_VCO_COARSE)))
return (error);
if ((error = rtsx_write_phy(sc, RTSX_PHY_FLD3,
RTSX_PHY_FLD3_TIMER_4 | RTSX_PHY_FLD3_TIMER_6 |
RTSX_PHY_FLD3_RXDELINK)))
return (error);
if ((error = rtsx_write_phy(sc, RTSX_PHY_TUNE,
RTSX_PHY_TUNE_TUNEREF_1_0 | RTSX_PHY_TUNE_VBGSEL_1252 |
RTSX_PHY_TUNE_SDBUS_33 | RTSX_PHY_TUNE_TUNED18 |
RTSX_PHY_TUNE_TUNED12 | RTSX_PHY_TUNE_TUNEA12)))
return (error);
break;
}
/* Set mcu_cnt to 7 to ensure data can be sampled properly. */
RTSX_BITOP(sc, RTSX_CLK_DIV, 0x07, 0x07);
/* Disable sleep mode. */
RTSX_CLR(sc, RTSX_HOST_SLEEP_STATE,
RTSX_HOST_ENTER_S1 | RTSX_HOST_ENTER_S3);
/* Disable card clock. */
RTSX_CLR(sc, RTSX_CARD_CLK_EN, RTSX_CARD_CLK_EN_ALL);
/* Reset delink mode. */
RTSX_CLR(sc, RTSX_CHANGE_LINK_STATE,
RTSX_FORCE_RST_CORE_EN | RTSX_NON_STICKY_RST_N_DBG);
/* Card driving select. */
RTSX_WRITE(sc, RTSX_CARD_DRIVE_SEL, sc->rtsx_card_drive_sel);
/* Enable SSC clock. */
RTSX_WRITE(sc, RTSX_SSC_CTL1, RTSX_SSC_8X_EN | RTSX_SSC_SEL_4M);
RTSX_WRITE(sc, RTSX_SSC_CTL2, 0x12);
/* Disable cd_pwr_save. */
RTSX_BITOP(sc, RTSX_CHANGE_LINK_STATE, 0x16, RTSX_MAC_PHY_RST_N_DBG);
/* Clear Link Ready Interrupt. */
RTSX_BITOP(sc, RTSX_IRQSTAT0, RTSX_LINK_READY_INT, RTSX_LINK_READY_INT);
/* Enlarge the estimation window of PERST# glitch
* to reduce the chance of invalid card interrupt. */
RTSX_WRITE(sc, RTSX_PERST_GLITCH_WIDTH, 0x80);
/* Set RC oscillator to 400K. */
RTSX_CLR(sc, RTSX_RCCTL, RTSX_RCCTL_F_2M);
/* Enable interrupt write-clear (default is read-clear). */
RTSX_CLR(sc, RTSX_NFTS_TX_CTRL, RTSX_INT_READ_CLR);
if (sc->rtsx_device_id == RTSX_RTS525A)
RTSX_BITOP(sc, RTSX_PM_CLK_FORCE_CTL, 1, 1);
/* OC power down. */
RTSX_BITOP(sc, RTSX_FPDCTL, RTSX_SD_OC_POWER_DOWN, RTSX_SD_OC_POWER_DOWN);
/* Enable clk_request_n to enable clock power management */
pci_write_config(sc->rtsx_dev, sc->rtsx_pcie_cap + PCIER_LINK_CTL + 1, 1, 1);
/* Enter L1 when host tx idle */
pci_write_config(sc->rtsx_dev, 0x70F, 0x5B, 1);
/*
* Specific extra init.
*/
switch (sc->rtsx_device_id) {
uint16_t cap;
case RTSX_RTS5209:
/* Turn off LED. */
RTSX_WRITE(sc, RTSX_CARD_GPIO, 0x03);
/* Reset ASPM state to default value. */
RTSX_CLR(sc, RTSX_ASPM_FORCE_CTL, RTSX_ASPM_FORCE_MASK);
/* Force CLKREQ# PIN to drive 0 to request clock. */
RTSX_BITOP(sc, RTSX_PETXCFG, 0x08, 0x08);
/* Configure GPIO as output. */
RTSX_WRITE(sc, RTSX_CARD_GPIO_DIR, 0x03);
/* Configure driving. */
RTSX_WRITE(sc, RTSX_SD30_CMD_DRIVE_SEL, sc->rtsx_sd30_drive_sel_3v3);
break;
case RTSX_RTS5227:
/* Configure GPIO as output. */
RTSX_BITOP(sc, RTSX_GPIO_CTL, RTSX_GPIO_LED_ON, RTSX_GPIO_LED_ON);
/* Reset ASPM state to default value. */
RTSX_BITOP(sc, RTSX_ASPM_FORCE_CTL, RTSX_ASPM_FORCE_MASK, RTSX_FORCE_ASPM_NO_ASPM);
/* Switch LDO3318 source from DV33 to 3V3. */
RTSX_CLR(sc, RTSX_LDO_PWR_SEL, RTSX_LDO_PWR_SEL_DV33);
RTSX_BITOP(sc, RTSX_LDO_PWR_SEL, RTSX_LDO_PWR_SEL_DV33, RTSX_LDO_PWR_SEL_3V3);
/* Set default OLT blink period. */
RTSX_BITOP(sc, RTSX_OLT_LED_CTL, 0x0F, RTSX_OLT_LED_PERIOD);
/* Configure LTR. */
cap = pci_read_config(sc->rtsx_dev, sc->rtsx_pcie_cap + PCIER_DEVICE_CTL2, 2);
if (cap & PCIEM_CTL2_LTR_ENABLE)
RTSX_WRITE(sc, RTSX_LTR_CTL, 0xa3);
/* Configure OBFF. */
RTSX_BITOP(sc, RTSX_OBFF_CFG, RTSX_OBFF_EN_MASK, RTSX_OBFF_ENABLE);
/* Configure driving. */
if ((error = rtsx_rts5227_fill_driving(sc)))
return (error);
/* Configure force_clock_req. */
if (sc->rtsx_flags & RTSX_F_REVERSE_SOCKET)
RTSX_BITOP(sc, RTSX_PETXCFG, 0xB8, 0xB8);
else
RTSX_BITOP(sc, RTSX_PETXCFG, 0xB8, 0x88);
RTSX_CLR(sc, RTSX_PM_CTRL3, RTSX_D3_DELINK_MODE_EN);
/*!!! Added for reboot after Windows. */
RTSX_BITOP(sc, RTSX_PM_CTRL3, RTSX_PM_WAKE_EN, RTSX_PM_WAKE_EN);
break;
case RTSX_RTS5229:
/* Configure GPIO as output. */
RTSX_BITOP(sc, RTSX_GPIO_CTL, RTSX_GPIO_LED_ON, RTSX_GPIO_LED_ON);
/* Reset ASPM state to default value. */
/* With this reset: dd if=/dev/random of=/dev/mmcsd0 encounter a timeout. */
//!!! RTSX_BITOP(sc, RTSX_ASPM_FORCE_CTL, RTSX_ASPM_FORCE_MASK, RTSX_FORCE_ASPM_NO_ASPM);
/* Force CLKREQ# PIN to drive 0 to request clock. */
RTSX_BITOP(sc, RTSX_PETXCFG, 0x08, 0x08);
/* Switch LDO3318 source from DV33 to card_3v3. */
RTSX_CLR(sc, RTSX_LDO_PWR_SEL, RTSX_LDO_PWR_SEL_DV33);
RTSX_BITOP(sc, RTSX_LDO_PWR_SEL, RTSX_LDO_PWR_SEL_DV33, RTSX_LDO_PWR_SEL_3V3);
/* Set default OLT blink period. */
RTSX_BITOP(sc, RTSX_OLT_LED_CTL, 0x0F, RTSX_OLT_LED_PERIOD);
/* Configure driving. */
RTSX_WRITE(sc, RTSX_SD30_CMD_DRIVE_SEL, sc->rtsx_sd30_drive_sel_3v3);
break;
case RTSX_RTS522A:
/* Add specific init from RTS5227. */
/* Configure GPIO as output. */
RTSX_BITOP(sc, RTSX_GPIO_CTL, RTSX_GPIO_LED_ON, RTSX_GPIO_LED_ON);
/* Reset ASPM state to default value. */
RTSX_BITOP(sc, RTSX_ASPM_FORCE_CTL, RTSX_ASPM_FORCE_MASK, RTSX_FORCE_ASPM_NO_ASPM);
/* Switch LDO3318 source from DV33 to 3V3. */
RTSX_CLR(sc, RTSX_LDO_PWR_SEL, RTSX_LDO_PWR_SEL_DV33);
RTSX_BITOP(sc, RTSX_LDO_PWR_SEL, RTSX_LDO_PWR_SEL_DV33, RTSX_LDO_PWR_SEL_3V3);
/* Set default OLT blink period. */
RTSX_BITOP(sc, RTSX_OLT_LED_CTL, 0x0F, RTSX_OLT_LED_PERIOD);
/* Configure LTR. */
cap = pci_read_config(sc->rtsx_dev, sc->rtsx_pcie_cap + PCIER_DEVICE_CTL2, 2);
if (cap & PCIEM_CTL2_LTR_ENABLE)
RTSX_WRITE(sc, RTSX_LTR_CTL, 0xa3);
/* Configure OBFF. */
RTSX_BITOP(sc, RTSX_OBFF_CFG, RTSX_OBFF_EN_MASK, RTSX_OBFF_ENABLE);
/* Configure driving. */
if ((error = rtsx_rts5227_fill_driving(sc)))
return (error);
/* Configure force_clock_req. */
if (sc->rtsx_flags & RTSX_F_REVERSE_SOCKET)
RTSX_BITOP(sc, RTSX_PETXCFG, 0xB8, 0xB8);
else
RTSX_BITOP(sc, RTSX_PETXCFG, 0xB8, 0x88);
RTSX_CLR(sc, RTSX_RTS522A_PM_CTRL3, 0x10);
/* specific for RTS522A. */
RTSX_BITOP(sc, RTSX_FUNC_FORCE_CTL,
RTSX_FUNC_FORCE_UPME_XMT_DBG, RTSX_FUNC_FORCE_UPME_XMT_DBG);
RTSX_BITOP(sc, RTSX_PCLK_CTL, 0x04, 0x04);
RTSX_BITOP(sc, RTSX_PM_EVENT_DEBUG,
RTSX_PME_DEBUG_0, RTSX_PME_DEBUG_0);
RTSX_WRITE(sc, RTSX_PM_CLK_FORCE_CTL, 0x11);
break;
case RTSX_RTS525A:
/* Add specific init from RTS5249. */
/* Rest L1SUB Config. */
RTSX_CLR(sc, RTSX_L1SUB_CONFIG3, 0xff);
/* Configure GPIO as output. */
RTSX_BITOP(sc, RTSX_GPIO_CTL, RTSX_GPIO_LED_ON, RTSX_GPIO_LED_ON);
/* Reset ASPM state to default value. */
RTSX_BITOP(sc, RTSX_ASPM_FORCE_CTL, RTSX_ASPM_FORCE_MASK, RTSX_FORCE_ASPM_NO_ASPM);
/* Switch LDO3318 source from DV33 to 3V3. */
RTSX_CLR(sc, RTSX_LDO_PWR_SEL, RTSX_LDO_PWR_SEL_DV33);
RTSX_BITOP(sc, RTSX_LDO_PWR_SEL, RTSX_LDO_PWR_SEL_DV33, RTSX_LDO_PWR_SEL_3V3);
/* Set default OLT blink period. */
RTSX_BITOP(sc, RTSX_OLT_LED_CTL, 0x0F, RTSX_OLT_LED_PERIOD);
/* Configure driving. */
if ((error = rtsx_rts5249_fill_driving(sc)))
return (error);
/* Configure force_clock_req. */
if (sc->rtsx_flags & RTSX_F_REVERSE_SOCKET)
RTSX_BITOP(sc, RTSX_PETXCFG, 0xB0, 0xB0);
else
RTSX_BITOP(sc, RTSX_PETXCFG, 0xB0, 0x80);
/* Specifc for RTS525A. */
RTSX_BITOP(sc, RTSX_PCLK_CTL, RTSX_PCLK_MODE_SEL, RTSX_PCLK_MODE_SEL);
if (sc->rtsx_flags & RTSX_F_VERSION_A) {
RTSX_WRITE(sc, RTSX_L1SUB_CONFIG2, RTSX_L1SUB_AUTO_CFG);
RTSX_BITOP(sc, RTSX_RREF_CFG,
RTSX_RREF_VBGSEL_MASK, RTSX_RREF_VBGSEL_1V25);
RTSX_BITOP(sc, RTSX_LDO_VIO_CFG,
RTSX_LDO_VIO_TUNE_MASK, RTSX_LDO_VIO_1V7);
RTSX_BITOP(sc, RTSX_LDO_DV12S_CFG,
RTSX_LDO_D12_TUNE_MASK, RTSX_LDO_D12_TUNE_DF);
RTSX_BITOP(sc, RTSX_LDO_AV12S_CFG,
RTSX_LDO_AV12S_TUNE_MASK, RTSX_LDO_AV12S_TUNE_DF);
RTSX_BITOP(sc, RTSX_LDO_VCC_CFG0,
RTSX_LDO_VCC_LMTVTH_MASK, RTSX_LDO_VCC_LMTVTH_2A);
RTSX_BITOP(sc, RTSX_OOBS_CONFIG,
RTSX_OOBS_AUTOK_DIS | RTSX_OOBS_VAL_MASK, 0x89);
}
break;
case RTSX_RTS5249:
/* Rest L1SUB Config. */
RTSX_CLR(sc, RTSX_L1SUB_CONFIG3, 0xff);
/* Configure GPIO as output. */
RTSX_BITOP(sc, RTSX_GPIO_CTL, RTSX_GPIO_LED_ON, RTSX_GPIO_LED_ON);
/* Reset ASPM state to default value. */
RTSX_BITOP(sc, RTSX_ASPM_FORCE_CTL, RTSX_ASPM_FORCE_MASK, RTSX_FORCE_ASPM_NO_ASPM);
/* Switch LDO3318 source from DV33 to 3V3. */
RTSX_CLR(sc, RTSX_LDO_PWR_SEL, RTSX_LDO_PWR_SEL_DV33);
RTSX_BITOP(sc, RTSX_LDO_PWR_SEL, RTSX_LDO_PWR_SEL_DV33, RTSX_LDO_PWR_SEL_3V3);
/* Set default OLT blink period. */
RTSX_BITOP(sc, RTSX_OLT_LED_CTL, 0x0F, RTSX_OLT_LED_PERIOD);
/* Configure driving. */
if ((error = rtsx_rts5249_fill_driving(sc)))
return (error);
/* Configure force_clock_req. */
if (sc->rtsx_flags & RTSX_F_REVERSE_SOCKET)
RTSX_BITOP(sc, RTSX_PETXCFG, 0xB0, 0xB0);
else
RTSX_BITOP(sc, RTSX_PETXCFG, 0xB0, 0x80);
break;
case RTSX_RTL8402:
case RTSX_RTL8411:
RTSX_WRITE(sc, RTSX_SD30_CMD_DRIVE_SEL, sc->rtsx_sd30_drive_sel_3v3);
RTSX_BITOP(sc, RTSX_CARD_PAD_CTL, RTSX_CD_DISABLE_MASK | RTSX_CD_AUTO_DISABLE,
RTSX_CD_ENABLE);
break;
case RTSX_RTL8411B:
if (sc->rtsx_flags & RTSX_F_8411B_QFN48)
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL3, 0xf5);
RTSX_WRITE(sc, RTSX_SD30_CMD_DRIVE_SEL, sc->rtsx_sd30_drive_sel_3v3);
/* Enable SD interrupt. */
RTSX_BITOP(sc, RTSX_CARD_PAD_CTL, RTSX_CD_DISABLE_MASK | RTSX_CD_AUTO_DISABLE,
RTSX_CD_ENABLE);
/* Clear hw_pfm_en to disable hardware PFM mode. */
RTSX_BITOP(sc, RTSX_FUNC_FORCE_CTL, 0x06, 0x00);
break;
}
/*!!! Added for reboot after Windows. */
rtsx_bus_power_off(sc);
rtsx_set_sd_timing(sc, bus_timing_normal);
rtsx_set_sd_clock(sc, 0);
/*!!! Added for reboot after Windows. */
return (0);
}
static int
rtsx_map_sd_drive(int index)
{
uint8_t sd_drive[4] =
{
0x01, /* Type D */
0x02, /* Type C */
0x05, /* Type A */
0x03 /* Type B */
};
return (sd_drive[index]);
}
/* For voltage 3v3. */
static int
rtsx_rts5227_fill_driving(struct rtsx_softc *sc)
{
u_char driving_3v3[4][3] = {
{0x13, 0x13, 0x13},
{0x96, 0x96, 0x96},
{0x7F, 0x7F, 0x7F},
{0x96, 0x96, 0x96},
};
RTSX_WRITE(sc, RTSX_SD30_CLK_DRIVE_SEL, driving_3v3[sc->rtsx_sd30_drive_sel_3v3][0]);
RTSX_WRITE(sc, RTSX_SD30_CMD_DRIVE_SEL, driving_3v3[sc->rtsx_sd30_drive_sel_3v3][1]);
RTSX_WRITE(sc, RTSX_SD30_DAT_DRIVE_SEL, driving_3v3[sc->rtsx_sd30_drive_sel_3v3][2]);
return (0);
}
/* For voltage 3v3. */
static int
rtsx_rts5249_fill_driving(struct rtsx_softc *sc)
{
u_char driving_3v3[4][3] = {
{0x11, 0x11, 0x18},
{0x55, 0x55, 0x5C},
{0xFF, 0xFF, 0xFF},
{0x96, 0x96, 0x96},
};
RTSX_WRITE(sc, RTSX_SD30_CLK_DRIVE_SEL, driving_3v3[sc->rtsx_sd30_drive_sel_3v3][0]);
RTSX_WRITE(sc, RTSX_SD30_CMD_DRIVE_SEL, driving_3v3[sc->rtsx_sd30_drive_sel_3v3][1]);
RTSX_WRITE(sc, RTSX_SD30_DAT_DRIVE_SEL, driving_3v3[sc->rtsx_sd30_drive_sel_3v3][2]);
return (0);
}
static int
rtsx_read(struct rtsx_softc *sc, uint16_t addr, uint8_t *val)
{
int tries = 1024;
uint32_t reg;
WRITE4(sc, RTSX_HAIMR, RTSX_HAIMR_BUSY |
(uint32_t)((addr & 0x3FFF) << 16));
while (tries--) {
reg = READ4(sc, RTSX_HAIMR);
if (!(reg & RTSX_HAIMR_BUSY))
break;
}
*val = (reg & 0xff);
return ((tries == 0) ? ETIMEDOUT : 0);
}
static int
rtsx_read_cfg(struct rtsx_softc *sc, uint8_t func, uint16_t addr, uint32_t *val)
{
int tries = 1024;
uint8_t data0, data1, data2, data3, rwctl;
RTSX_WRITE(sc, RTSX_CFGADDR0, addr);
RTSX_WRITE(sc, RTSX_CFGADDR1, addr >> 8);
RTSX_WRITE(sc, RTSX_CFGRWCTL, RTSX_CFG_BUSY | (func & 0x03 << 4));
while (tries--) {
RTSX_READ(sc, RTSX_CFGRWCTL, &rwctl);
if (!(rwctl & RTSX_CFG_BUSY))
break;
}
if (tries == 0)
return (ETIMEDOUT);
RTSX_READ(sc, RTSX_CFGDATA0, &data0);
RTSX_READ(sc, RTSX_CFGDATA1, &data1);
RTSX_READ(sc, RTSX_CFGDATA2, &data2);
RTSX_READ(sc, RTSX_CFGDATA3, &data3);
*val = (data3 << 24) | (data2 << 16) | (data1 << 8) | data0;
return (0);
}
static int
rtsx_write(struct rtsx_softc *sc, uint16_t addr, uint8_t mask, uint8_t val)
{
int tries = 1024;
uint32_t reg;
WRITE4(sc, RTSX_HAIMR,
RTSX_HAIMR_BUSY | RTSX_HAIMR_WRITE |
(uint32_t)(((addr & 0x3FFF) << 16) |
(mask << 8) | val));
while (tries--) {
reg = READ4(sc, RTSX_HAIMR);
if (!(reg & RTSX_HAIMR_BUSY)) {
if (val != (reg & 0xff))
return (EIO);
return (0);
}
}
return (ETIMEDOUT);
}
static int
rtsx_read_phy(struct rtsx_softc *sc, uint8_t addr, uint16_t *val)
{
int tries = 100000;
uint8_t data0, data1, rwctl;
RTSX_WRITE(sc, RTSX_PHY_ADDR, addr);
RTSX_WRITE(sc, RTSX_PHY_RWCTL, RTSX_PHY_BUSY | RTSX_PHY_READ);
while (tries--) {
RTSX_READ(sc, RTSX_PHY_RWCTL, &rwctl);
if (!(rwctl & RTSX_PHY_BUSY))
break;
}
if (tries == 0)
return (ETIMEDOUT);
RTSX_READ(sc, RTSX_PHY_DATA0, &data0);
RTSX_READ(sc, RTSX_PHY_DATA1, &data1);
*val = data1 << 8 | data0;
return (0);
}
static int
rtsx_write_phy(struct rtsx_softc *sc, uint8_t addr, uint16_t val)
{
int tries = 100000;
uint8_t rwctl;
RTSX_WRITE(sc, RTSX_PHY_DATA0, val);
RTSX_WRITE(sc, RTSX_PHY_DATA1, val >> 8);
RTSX_WRITE(sc, RTSX_PHY_ADDR, addr);
RTSX_WRITE(sc, RTSX_PHY_RWCTL, RTSX_PHY_BUSY | RTSX_PHY_WRITE);
while (tries--) {
RTSX_READ(sc, RTSX_PHY_RWCTL, &rwctl);
if (!(rwctl & RTSX_PHY_BUSY))
break;
}
return ((tries == 0) ? ETIMEDOUT : 0);
}
/*
* Notice that the meaning of RTSX_PWR_GATE_CTRL changes between RTS5209 and
* RTS5229. In RTS5209 it is a mask of disabled power gates, while in RTS5229
* it is a mask of *enabled* gates.
*/
static int
rtsx_bus_power_off(struct rtsx_softc *sc)
{
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_bus_power_off()\n");
/* Disable SD clock. */
RTSX_CLR(sc, RTSX_CARD_CLK_EN, RTSX_SD_CLK_EN);
/* Disable SD output. */
RTSX_CLR(sc, RTSX_CARD_OE, RTSX_SD_OUTPUT_EN);
/* Turn off power. */
switch (sc->rtsx_device_id) {
case RTSX_RTS5209:
RTSX_BITOP(sc, RTSX_CARD_PWR_CTL, RTSX_SD_PWR_MASK | RTSX_PMOS_STRG_MASK,
RTSX_SD_PWR_OFF | RTSX_PMOS_STRG_400mA);
RTSX_SET(sc, RTSX_PWR_GATE_CTRL, RTSX_LDO3318_OFF);
break;
case RTSX_RTS5227:
case RTSX_RTS5229:
case RTSX_RTS522A:
RTSX_BITOP(sc, RTSX_CARD_PWR_CTL, RTSX_SD_PWR_MASK | RTSX_PMOS_STRG_MASK,
RTSX_SD_PWR_OFF | RTSX_PMOS_STRG_400mA);
RTSX_CLR(sc, RTSX_PWR_GATE_CTRL, RTSX_LDO3318_PWR_MASK);
break;
case RTSX_RTL8402:
case RTSX_RTL8411:
case RTSX_RTL8411B:
RTSX_BITOP(sc, RTSX_CARD_PWR_CTL, RTSX_BPP_POWER_MASK,
RTSX_BPP_POWER_OFF);
RTSX_BITOP(sc, RTSX_LDO_CTL, RTSX_BPP_LDO_POWB,
RTSX_BPP_LDO_SUSPEND);
break;
default:
RTSX_CLR(sc, RTSX_PWR_GATE_CTRL, RTSX_LDO3318_PWR_MASK);
RTSX_SET(sc, RTSX_CARD_PWR_CTL, RTSX_SD_PWR_OFF);
RTSX_CLR(sc, RTSX_CARD_PWR_CTL, RTSX_PMOS_STRG_800mA);
break;
}
/* Disable pull control. */
switch (sc->rtsx_device_id) {
case RTSX_RTS5209:
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL1, RTSX_PULL_CTL_DISABLE12);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL2, RTSX_PULL_CTL_DISABLE12);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL3, RTSX_PULL_CTL_DISABLE3);
break;
case RTSX_RTS5227:
case RTSX_RTS522A:
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL2, RTSX_PULL_CTL_DISABLE12);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL3, RTSX_PULL_CTL_DISABLE3);
break;
case RTSX_RTS5229:
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL2, RTSX_PULL_CTL_DISABLE12);
if (sc->rtsx_flags & RTSX_F_VERSION_C)
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL3, RTSX_PULL_CTL_DISABLE3_TYPE_C);
else
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL3, RTSX_PULL_CTL_DISABLE3);
break;
case RTSX_RTS525A:
case RTSX_RTS5249:
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL1, 0x66);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL2, RTSX_PULL_CTL_DISABLE12);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL3, RTSX_PULL_CTL_DISABLE3);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL4, 0x55);
break;
case RTSX_RTL8402:
case RTSX_RTL8411:
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL1, 0x65);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL2, 0x55);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL3, 0x95);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL4, 0x09);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL5, 0x05);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL6, 0x04);
break;
case RTSX_RTL8411B:
if (sc->rtsx_flags & RTSX_F_8411B_QFN48) {
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL2, 0x55);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL3, 0xf5);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL6, 0x15);
} else {
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL1, 0x65);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL2, 0x55);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL3, 0xd5);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL4, 0x59);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL5, 0x55);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL6, 0x15);
}
break;
}
return (0);
}
static int
rtsx_bus_power_on(struct rtsx_softc *sc)
{
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_bus_power_on()\n");
/* Select SD card. */
RTSX_BITOP(sc, RTSX_CARD_SELECT, 0x07, RTSX_SD_MOD_SEL);
RTSX_BITOP(sc, RTSX_CARD_SHARE_MODE, RTSX_CARD_SHARE_MASK, RTSX_CARD_SHARE_48_SD);
/* Enable SD clock. */
RTSX_BITOP(sc, RTSX_CARD_CLK_EN, RTSX_SD_CLK_EN, RTSX_SD_CLK_EN);
/* Enable pull control. */
switch (sc->rtsx_device_id) {
case RTSX_RTS5209:
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL1, RTSX_PULL_CTL_ENABLE12);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL2, RTSX_PULL_CTL_ENABLE12);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL3, RTSX_PULL_CTL_ENABLE3);
break;
case RTSX_RTS5227:
case RTSX_RTS522A:
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL2, RTSX_PULL_CTL_ENABLE12);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL3, RTSX_PULL_CTL_ENABLE3);
break;
case RTSX_RTS5229:
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL2, RTSX_PULL_CTL_ENABLE12);
if (sc->rtsx_flags & RTSX_F_VERSION_C)
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL3, RTSX_PULL_CTL_ENABLE3_TYPE_C);
else
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL3, RTSX_PULL_CTL_ENABLE3);
break;
case RTSX_RTS525A:
case RTSX_RTS5249:
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL1, 0x66);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL2, RTSX_PULL_CTL_ENABLE12);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL3, RTSX_PULL_CTL_ENABLE3);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL4, 0xaa);
break;
case RTSX_RTL8402:
case RTSX_RTL8411:
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL1, 0xaa);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL2, 0xaa);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL3, 0xa9);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL4, 0x09);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL5, 0x09);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL6, 0x04);
break;
case RTSX_RTL8411B:
if (sc->rtsx_flags & RTSX_F_8411B_QFN48) {
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL2, 0xaa);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL3, 0xf9);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL6, 0x19);
} else {
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL1, 0xaa);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL2, 0xaa);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL3, 0xd9);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL4, 0x59);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL5, 0x55);
RTSX_WRITE(sc, RTSX_CARD_PULL_CTL6, 0x15);
}
break;
}
/*
* To avoid a current peak, enable card power in two phases
* with a delay in between.
*/
switch (sc->rtsx_device_id) {
case RTSX_RTS5209:
/* Partial power. */
RTSX_BITOP(sc, RTSX_CARD_PWR_CTL, RTSX_SD_PWR_MASK, RTSX_SD_PARTIAL_PWR_ON);
RTSX_BITOP(sc, RTSX_PWR_GATE_CTRL, RTSX_LDO3318_PWR_MASK, RTSX_LDO3318_VCC2);
DELAY(200);
/* Full power. */
RTSX_BITOP(sc, RTSX_CARD_PWR_CTL, RTSX_SD_PWR_MASK, RTSX_SD_PWR_ON);
RTSX_BITOP(sc, RTSX_PWR_GATE_CTRL, RTSX_LDO3318_PWR_MASK, RTSX_LDO3318_ON);
break;
case RTSX_RTS5227:
case RTSX_RTS522A:
/* Partial power. */
RTSX_BITOP(sc, RTSX_CARD_PWR_CTL, RTSX_SD_PWR_MASK, RTSX_SD_PARTIAL_PWR_ON);
RTSX_BITOP(sc, RTSX_PWR_GATE_CTRL, RTSX_LDO3318_PWR_MASK, RTSX_LDO3318_VCC1);
DELAY(200);
/* Full power. */
RTSX_BITOP(sc, RTSX_CARD_PWR_CTL, RTSX_SD_PWR_MASK, RTSX_SD_PWR_ON);
RTSX_BITOP(sc, RTSX_PWR_GATE_CTRL, RTSX_LDO3318_PWR_MASK,
RTSX_LDO3318_VCC1 | RTSX_LDO3318_VCC2);
RTSX_BITOP(sc, RTSX_CARD_OE, RTSX_SD_OUTPUT_EN, RTSX_SD_OUTPUT_EN);
RTSX_BITOP(sc, RTSX_CARD_OE, RTSX_MS_OUTPUT_EN, RTSX_MS_OUTPUT_EN);
break;
case RTSX_RTS5229:
/* Partial power. */
RTSX_BITOP(sc, RTSX_CARD_PWR_CTL, RTSX_SD_PWR_MASK, RTSX_SD_PARTIAL_PWR_ON);
RTSX_BITOP(sc, RTSX_PWR_GATE_CTRL, RTSX_LDO3318_PWR_MASK, RTSX_LDO3318_VCC1);
DELAY(200);
/* Full power. */
RTSX_BITOP(sc, RTSX_CARD_PWR_CTL, RTSX_SD_PWR_MASK, RTSX_SD_PWR_ON);
RTSX_BITOP(sc, RTSX_PWR_GATE_CTRL, RTSX_LDO3318_PWR_MASK,
RTSX_LDO3318_VCC1 | RTSX_LDO3318_VCC2);
break;
case RTSX_RTS525A:
RTSX_BITOP(sc, RTSX_LDO_VCC_CFG1, RTSX_LDO_VCC_TUNE_MASK, RTSX_LDO_VCC_3V3);
case RTSX_RTS5249:
/* Partial power. */
RTSX_BITOP(sc, RTSX_CARD_PWR_CTL, RTSX_SD_PWR_MASK, RTSX_SD_PARTIAL_PWR_ON);
RTSX_BITOP(sc, RTSX_PWR_GATE_CTRL, RTSX_LDO3318_PWR_MASK, RTSX_LDO3318_VCC1);
DELAY(200);
/* Full power. */
RTSX_BITOP(sc, RTSX_CARD_PWR_CTL, RTSX_SD_PWR_MASK, RTSX_SD_PWR_ON);
RTSX_BITOP(sc, RTSX_PWR_GATE_CTRL, RTSX_LDO3318_PWR_MASK,
RTSX_LDO3318_VCC1 | RTSX_LDO3318_VCC2);
break;
case RTSX_RTL8402:
case RTSX_RTL8411:
case RTSX_RTL8411B:
RTSX_BITOP(sc, RTSX_CARD_PWR_CTL, RTSX_BPP_POWER_MASK,
RTSX_BPP_POWER_5_PERCENT_ON);
RTSX_BITOP(sc, RTSX_LDO_CTL, RTSX_BPP_LDO_POWB,
RTSX_BPP_LDO_SUSPEND);
DELAY(150);
RTSX_BITOP(sc, RTSX_CARD_PWR_CTL, RTSX_BPP_POWER_MASK,
RTSX_BPP_POWER_10_PERCENT_ON);
DELAY(150);
RTSX_BITOP(sc, RTSX_CARD_PWR_CTL, RTSX_BPP_POWER_MASK,
RTSX_BPP_POWER_15_PERCENT_ON);
DELAY(150);
RTSX_BITOP(sc, RTSX_CARD_PWR_CTL, RTSX_BPP_POWER_MASK,
RTSX_BPP_POWER_ON);
RTSX_BITOP(sc, RTSX_LDO_CTL, RTSX_BPP_LDO_POWB,
RTSX_BPP_LDO_ON);
break;
}
/* Enable SD card output. */
RTSX_WRITE(sc, RTSX_CARD_OE, RTSX_SD_OUTPUT_EN);
DELAY(200);
return (0);
}
/*
* Set but width.
*/
static int
rtsx_set_bus_width(struct rtsx_softc *sc, enum mmc_bus_width width)
{
uint32_t bus_width;
switch (width) {
case bus_width_1:
bus_width = RTSX_BUS_WIDTH_1;
break;
case bus_width_4:
bus_width = RTSX_BUS_WIDTH_4;
break;
case bus_width_8:
bus_width = RTSX_BUS_WIDTH_8;
break;
default:
return (MMC_ERR_INVALID);
}
RTSX_BITOP(sc, RTSX_SD_CFG1, RTSX_BUS_WIDTH_MASK, bus_width);
if (bootverbose || sc->rtsx_debug) {
char *busw[] = {
"1 bit",
"4 bits",
"8 bits"
};
device_printf(sc->rtsx_dev, "Setting bus width to %s\n", busw[bus_width]);
}
return (0);
}
static int
rtsx_set_sd_timing(struct rtsx_softc *sc, enum mmc_bus_timing timing)
{
if (timing == bus_timing_hs && sc->rtsx_force_timing) {
timing = bus_timing_uhs_sdr50;
sc->rtsx_ios_timing = timing;
}
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_set_sd_timing(%u)\n", timing);
switch (timing) {
case bus_timing_uhs_sdr50:
case bus_timing_uhs_sdr104:
sc->rtsx_double_clk = false;
sc->rtsx_vpclk = true;
RTSX_BITOP(sc, RTSX_SD_CFG1, 0x0c | RTSX_SD_ASYNC_FIFO_NOT_RST,
RTSX_SD30_MODE | RTSX_SD_ASYNC_FIFO_NOT_RST);
RTSX_BITOP(sc, RTSX_CLK_CTL, RTSX_CLK_LOW_FREQ, RTSX_CLK_LOW_FREQ);
RTSX_WRITE(sc, RTSX_CARD_CLK_SOURCE,
RTSX_CRC_VAR_CLK0 | RTSX_SD30_FIX_CLK | RTSX_SAMPLE_VAR_CLK1);
RTSX_CLR(sc, RTSX_CLK_CTL, RTSX_CLK_LOW_FREQ);
break;
case bus_timing_hs:
RTSX_BITOP(sc, RTSX_SD_CFG1, RTSX_SD_MODE_MASK, RTSX_SD20_MODE);
RTSX_BITOP(sc, RTSX_CLK_CTL, RTSX_CLK_LOW_FREQ, RTSX_CLK_LOW_FREQ);
RTSX_WRITE(sc, RTSX_CARD_CLK_SOURCE,
RTSX_CRC_FIX_CLK | RTSX_SD30_VAR_CLK0 | RTSX_SAMPLE_VAR_CLK1);
RTSX_CLR(sc, RTSX_CLK_CTL, RTSX_CLK_LOW_FREQ);
RTSX_BITOP(sc, RTSX_SD_PUSH_POINT_CTL,
RTSX_SD20_TX_SEL_MASK, RTSX_SD20_TX_14_AHEAD);
RTSX_BITOP(sc, RTSX_SD_SAMPLE_POINT_CTL,
RTSX_SD20_RX_SEL_MASK, RTSX_SD20_RX_14_DELAY);
break;
default:
RTSX_BITOP(sc, RTSX_SD_CFG1, RTSX_SD_MODE_MASK, RTSX_SD20_MODE);
RTSX_BITOP(sc, RTSX_CLK_CTL, RTSX_CLK_LOW_FREQ, RTSX_CLK_LOW_FREQ);
RTSX_WRITE(sc, RTSX_CARD_CLK_SOURCE,
RTSX_CRC_FIX_CLK | RTSX_SD30_VAR_CLK0 | RTSX_SAMPLE_VAR_CLK1);
RTSX_CLR(sc, RTSX_CLK_CTL, RTSX_CLK_LOW_FREQ);
RTSX_WRITE(sc, RTSX_SD_PUSH_POINT_CTL, RTSX_SD20_TX_NEG_EDGE);
RTSX_BITOP(sc, RTSX_SD_SAMPLE_POINT_CTL,
RTSX_SD20_RX_SEL_MASK, RTSX_SD20_RX_POS_EDGE);
break;
}
return (0);
}
/*
* Set or change SDCLK frequency or disable the SD clock.
* Return zero on success.
*/
static int
rtsx_set_sd_clock(struct rtsx_softc *sc, uint32_t freq)
{
uint8_t clk;
uint8_t clk_divider, n, div, mcu;
int error = 0;
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_set_sd_clock(%u)\n", freq);
if (freq == RTSX_SDCLK_OFF) {
error = rtsx_stop_sd_clock(sc);
return error;
}
sc->rtsx_ssc_depth = RTSX_SSC_DEPTH_500K;
sc->rtsx_discovery_mode = (freq <= 1000000) ? true : false;
if (sc->rtsx_discovery_mode) {
/* We use 250k(around) here, in discovery stage. */
clk_divider = RTSX_CLK_DIVIDE_128;
freq = 30000000;
} else {
clk_divider = RTSX_CLK_DIVIDE_0;
}
RTSX_BITOP(sc, RTSX_SD_CFG1, RTSX_CLK_DIVIDE_MASK, clk_divider);
freq /= 1000000;
if (sc->rtsx_discovery_mode || !sc->rtsx_double_clk)
clk = freq;
else
clk = freq * 2;
switch (sc->rtsx_device_id) {
case RTSX_RTL8402:
case RTSX_RTL8411:
case RTSX_RTL8411B:
n = clk * 4 / 5 - 2;
break;
default:
n = clk - 2;
break;
}
if ((clk <= 2) || (n > RTSX_MAX_DIV_N))
return (MMC_ERR_INVALID);
mcu = 125 / clk + 3;
if (mcu > 15)
mcu = 15;
/* Make sure that the SSC clock div_n is not less than RTSX_MIN_DIV_N. */
div = RTSX_CLK_DIV_1;
while ((n < RTSX_MIN_DIV_N) && (div < RTSX_CLK_DIV_8)) {
switch (sc->rtsx_device_id) {
case RTSX_RTL8402:
case RTSX_RTL8411:
case RTSX_RTL8411B:
n = (((n + 2) * 5 / 4) * 2) * 4 / 5 - 2;
break;
default:
n = (n + 2) * 2 - 2;
break;
}
div++;
}
if (sc->rtsx_double_clk && sc->rtsx_ssc_depth > 1)
sc->rtsx_ssc_depth -= 1;
if (div > RTSX_CLK_DIV_1) {
if (sc->rtsx_ssc_depth > (div - 1))
sc->rtsx_ssc_depth -= (div - 1);
else
sc->rtsx_ssc_depth = RTSX_SSC_DEPTH_4M;
}
/* Enable SD clock. */
error = rtsx_switch_sd_clock(sc, clk, n, div, mcu);
return (error);
}
static int
rtsx_stop_sd_clock(struct rtsx_softc *sc)
{
RTSX_CLR(sc, RTSX_CARD_CLK_EN, RTSX_CARD_CLK_EN_ALL);
RTSX_SET(sc, RTSX_SD_BUS_STAT, RTSX_SD_CLK_FORCE_STOP);
return (0);
}
static int
rtsx_switch_sd_clock(struct rtsx_softc *sc, uint8_t clk, uint8_t n, uint8_t div, uint8_t mcu)
{
if (bootverbose || sc->rtsx_debug) {
device_printf(sc->rtsx_dev, "rtsx_switch_sd_clock() - discovery-mode is %s, ssc_depth: %d\n",
(sc->rtsx_discovery_mode) ? "true" : "false", sc->rtsx_ssc_depth);
device_printf(sc->rtsx_dev, "rtsx_switch_sd_clock() - clk: %d, n: %d, div: %d, mcu: %d\n",
clk, n, div, mcu);
}
RTSX_BITOP(sc, RTSX_CLK_CTL, RTSX_CLK_LOW_FREQ, RTSX_CLK_LOW_FREQ);
RTSX_WRITE(sc, RTSX_CLK_DIV, (div << 4) | mcu);
RTSX_CLR(sc, RTSX_SSC_CTL1, RTSX_RSTB);
RTSX_BITOP(sc, RTSX_SSC_CTL2, RTSX_SSC_DEPTH_MASK, sc->rtsx_ssc_depth);
RTSX_WRITE(sc, RTSX_SSC_DIV_N_0, n);
RTSX_BITOP(sc, RTSX_SSC_CTL1, RTSX_RSTB, RTSX_RSTB);
if (sc->rtsx_vpclk) {
RTSX_CLR(sc, RTSX_SD_VPCLK0_CTL, RTSX_PHASE_NOT_RESET);
RTSX_BITOP(sc, RTSX_SD_VPCLK0_CTL, RTSX_PHASE_NOT_RESET, RTSX_PHASE_NOT_RESET);
}
/* Wait SSC clock stable. */
DELAY(200);
RTSX_CLR(sc, RTSX_CLK_CTL, RTSX_CLK_LOW_FREQ);
return (0);
}
static void
rtsx_sd_change_tx_phase(struct rtsx_softc *sc, uint8_t sample_point)
{
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_sd_change_tx_phase() - sample_point: %d\n", sample_point);
rtsx_write(sc, RTSX_CLK_CTL, RTSX_CHANGE_CLK, RTSX_CHANGE_CLK);
rtsx_write(sc, RTSX_SD_VPCLK0_CTL, RTSX_PHASE_SELECT_MASK, sample_point);
rtsx_write(sc, RTSX_SD_VPCLK0_CTL, RTSX_PHASE_NOT_RESET, 0);
rtsx_write(sc, RTSX_SD_VPCLK0_CTL, RTSX_PHASE_NOT_RESET, RTSX_PHASE_NOT_RESET);
rtsx_write(sc, RTSX_CLK_CTL, RTSX_CHANGE_CLK, 0);
rtsx_write(sc, RTSX_SD_CFG1, RTSX_SD_ASYNC_FIFO_NOT_RST, 0);
}
static void
rtsx_sd_change_rx_phase(struct rtsx_softc *sc, uint8_t sample_point)
{
if (bootverbose || sc->rtsx_debug == 2)
device_printf(sc->rtsx_dev, "rtsx_sd_change_rx_phase() - sample_point: %d\n", sample_point);
rtsx_write(sc, RTSX_CLK_CTL, RTSX_CHANGE_CLK, RTSX_CHANGE_CLK);
rtsx_write(sc, RTSX_SD_VPCLK1_CTL, RTSX_PHASE_SELECT_MASK, sample_point);
rtsx_write(sc, RTSX_SD_VPCLK1_CTL, RTSX_PHASE_NOT_RESET, 0);
rtsx_write(sc, RTSX_SD_VPCLK1_CTL, RTSX_PHASE_NOT_RESET, RTSX_PHASE_NOT_RESET);
rtsx_write(sc, RTSX_CLK_CTL, RTSX_CHANGE_CLK, 0);
rtsx_write(sc, RTSX_SD_CFG1, RTSX_SD_ASYNC_FIFO_NOT_RST, 0);
}
static void
rtsx_sd_tuning_rx_phase(struct rtsx_softc *sc, uint32_t *phase_map)
{
uint32_t raw_phase_map = 0;
int i;
int error;
for (i = 0; i < RTSX_RX_PHASE_MAX; i++) {
error = rtsx_sd_tuning_rx_cmd(sc, (uint8_t)i);
if (error == 0)
raw_phase_map |= 1 << i;
}
if (phase_map != NULL)
*phase_map = raw_phase_map;
}
static int
rtsx_sd_tuning_rx_cmd(struct rtsx_softc *sc, uint8_t sample_point)
{
struct mmc_request req = {};
struct mmc_command cmd = {};
int error = 0;
cmd.opcode = MMC_SEND_TUNING_BLOCK;
cmd.arg = 0;
req.cmd = &cmd;
RTSX_LOCK(sc);
sc->rtsx_req = &req;
rtsx_sd_change_rx_phase(sc, sample_point);
rtsx_write(sc, RTSX_SD_CFG3, RTSX_SD_RSP_80CLK_TIMEOUT_EN,
RTSX_SD_RSP_80CLK_TIMEOUT_EN);
rtsx_init_cmd(sc, &cmd);
rtsx_set_cmd_data_len(sc, 1, 0x40);
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_CFG2, 0xff,
RTSX_SD_CALCULATE_CRC7 | RTSX_SD_CHECK_CRC16 |
RTSX_SD_NO_WAIT_BUSY_END | RTSX_SD_CHECK_CRC7 | RTSX_SD_RSP_LEN_6);
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_TRANSFER,
0xff, RTSX_TM_AUTO_TUNING | RTSX_SD_TRANSFER_START);
rtsx_push_cmd(sc, RTSX_CHECK_REG_CMD, RTSX_SD_TRANSFER,
RTSX_SD_TRANSFER_END, RTSX_SD_TRANSFER_END);
/* Set interrupt post processing */
sc->rtsx_intr_trans_ok = rtsx_sd_tuning_rx_cmd_wakeup;
sc->rtsx_intr_trans_ko = rtsx_sd_tuning_rx_cmd_wakeup;
/* Run the command queue. */
rtsx_send_cmd(sc);
error = rtsx_sd_tuning_rx_cmd_wait(sc, &cmd);
if (error) {
if (bootverbose || sc->rtsx_debug == 2)
device_printf(sc->rtsx_dev, "rtsx_sd_tuning_rx_cmd() - error: %d\n", error);
rtsx_sd_wait_data_idle(sc);
rtsx_clear_error(sc);
}
rtsx_write(sc, RTSX_SD_CFG3, RTSX_SD_RSP_80CLK_TIMEOUT_EN, 0);
sc->rtsx_req = NULL;
RTSX_UNLOCK(sc);
return (error);
}
static int
rtsx_sd_tuning_rx_cmd_wait(struct rtsx_softc *sc, struct mmc_command *cmd)
{
int status;
int mask = RTSX_TRANS_OK_INT | RTSX_TRANS_FAIL_INT;
status = sc->rtsx_intr_status & mask;
while (status == 0) {
if (msleep(&sc->rtsx_intr_status, &sc->rtsx_mtx, 0, "rtsxintr", sc->rtsx_timeout) == EWOULDBLOCK) {
cmd->error = MMC_ERR_TIMEOUT;
return (MMC_ERR_TIMEOUT);
}
status = sc->rtsx_intr_status & mask;
}
return (cmd->error);
}
static void
rtsx_sd_tuning_rx_cmd_wakeup(struct rtsx_softc *sc)
{
wakeup(&sc->rtsx_intr_status);
}
static void
rtsx_sd_wait_data_idle(struct rtsx_softc *sc)
{
int i;
uint8_t val;
for (i = 0; i < 100; i++) {
rtsx_read(sc, RTSX_SD_DATA_STATE, &val);
if (val & RTSX_SD_DATA_IDLE)
return;
DELAY(100);
}
}
static uint8_t
rtsx_sd_search_final_rx_phase(struct rtsx_softc *sc, uint32_t phase_map)
{
int start = 0, len = 0;
int start_final = 0, len_final = 0;
uint8_t final_phase = 0xff;
while (start < RTSX_RX_PHASE_MAX) {
len = rtsx_sd_get_rx_phase_len(phase_map, start);
if (len_final < len) {
start_final = start;
len_final = len;
}
start += len ? len : 1;
}
final_phase = (start_final + len_final / 2) % RTSX_RX_PHASE_MAX;
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev,
"rtsx_sd_search_final_rx_phase() - phase_map: %x, start_final: %d, len_final: %d, final_phase: %d\n",
phase_map, start_final, len_final, final_phase);
return final_phase;
}
static int
rtsx_sd_get_rx_phase_len(uint32_t phase_map, int start_bit)
{
int i;
for (i = 0; i < RTSX_RX_PHASE_MAX; i++) {
if ((phase_map & (1 << (start_bit + i) % RTSX_RX_PHASE_MAX)) == 0)
return i;
}
return RTSX_RX_PHASE_MAX;
}
#if 0 /* For led */
static int
rtsx_led_enable(struct rtsx_softc *sc)
{
switch (sc->rtsx_device_id) {
case RTSX_RTS5209:
RTSX_CLR(sc, RTSX_CARD_GPIO, RTSX_CARD_GPIO_LED_OFF);
RTSX_WRITE(sc, RTSX_CARD_AUTO_BLINK,
RTSX_LED_BLINK_EN | RTSX_LED_BLINK_SPEED);
break;
case RTSX_RTL8411B:
RTSX_CLR(sc, RTSX_GPIO_CTL, 0x01);
RTSX_WRITE(sc, RTSX_CARD_AUTO_BLINK,
RTSX_LED_BLINK_EN | RTSX_LED_BLINK_SPEED);
break;
default:
RTSX_SET(sc, RTSX_GPIO_CTL, RTSX_GPIO_LED_ON);
RTSX_SET(sc, RTSX_OLT_LED_CTL, RTSX_OLT_LED_AUTOBLINK);
break;
}
return (0);
}
static int
rtsx_led_disable(struct rtsx_softc *sc)
{
switch (sc->rtsx_device_id) {
case RTSX_RTS5209:
RTSX_CLR(sc, RTSX_CARD_AUTO_BLINK, RTSX_LED_BLINK_EN);
RTSX_WRITE(sc, RTSX_CARD_GPIO, RTSX_CARD_GPIO_LED_OFF);
break;
case RTSX_RTL8411B:
RTSX_CLR(sc, RTSX_CARD_AUTO_BLINK, RTSX_LED_BLINK_EN);
RTSX_SET(sc, RTSX_GPIO_CTL, 0x01);
break;
default:
RTSX_CLR(sc, RTSX_OLT_LED_CTL, RTSX_OLT_LED_AUTOBLINK);
RTSX_CLR(sc, RTSX_GPIO_CTL, RTSX_GPIO_LED_ON);
break;
}
return (0);
}
#endif /* For led */
static uint8_t
rtsx_response_type(uint16_t mmc_rsp)
{
int i;
struct rsp_type {
uint16_t mmc_rsp;
uint8_t rtsx_rsp;
} rsp_types[] = {
{ MMC_RSP_NONE, RTSX_SD_RSP_TYPE_R0 },
{ MMC_RSP_R1, RTSX_SD_RSP_TYPE_R1 },
{ MMC_RSP_R1B, RTSX_SD_RSP_TYPE_R1B },
{ MMC_RSP_R2, RTSX_SD_RSP_TYPE_R2 },
{ MMC_RSP_R3, RTSX_SD_RSP_TYPE_R3 },
{ MMC_RSP_R4, RTSX_SD_RSP_TYPE_R4 },
{ MMC_RSP_R5, RTSX_SD_RSP_TYPE_R5 },
{ MMC_RSP_R6, RTSX_SD_RSP_TYPE_R6 },
{ MMC_RSP_R7, RTSX_SD_RSP_TYPE_R7 }
};
for (i = 0; i < nitems(rsp_types); i++) {
if (mmc_rsp == rsp_types[i].mmc_rsp)
return (rsp_types[i].rtsx_rsp);
}
return (0);
}
/*
* Init command buffer with SD command index and argument.
*/
static void
rtsx_init_cmd(struct rtsx_softc *sc, struct mmc_command *cmd)
{
sc->rtsx_cmd_index = 0;
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_CMD0,
0xff, RTSX_SD_CMD_START | cmd->opcode);
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_CMD1,
0xff, cmd->arg >> 24);
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_CMD2,
0xff, cmd->arg >> 16);
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_CMD3,
0xff, cmd->arg >> 8);
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_CMD4,
0xff, cmd->arg);
}
/*
* Append a properly encoded host command to the host command buffer.
*/
static void
rtsx_push_cmd(struct rtsx_softc *sc, uint8_t cmd, uint16_t reg,
uint8_t mask, uint8_t data)
{
KASSERT(sc->rtsx_cmd_index < RTSX_HOSTCMD_MAX,
("rtsx: Too many host commands (%d)\n", sc->rtsx_cmd_index));
uint32_t *cmd_buffer = (uint32_t *)(sc->rtsx_cmd_dmamem);
cmd_buffer[sc->rtsx_cmd_index++] =
htole32((uint32_t)(cmd & 0x3) << 30) |
((uint32_t)(reg & 0x3fff) << 16) |
((uint32_t)(mask) << 8) |
((uint32_t)data);
}
/*
* Queue commands to configure data transfer size.
*/
static void
rtsx_set_cmd_data_len(struct rtsx_softc *sc, uint16_t block_cnt, uint16_t byte_cnt)
{
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_BLOCK_CNT_L,
0xff, block_cnt & 0xff);
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_BLOCK_CNT_H,
0xff, block_cnt >> 8);
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_BYTE_CNT_L,
0xff, byte_cnt & 0xff);
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_BYTE_CNT_H,
0xff, byte_cnt >> 8);
}
/*
* Run the command queue.
*/
static void
rtsx_send_cmd(struct rtsx_softc *sc)
{
if (bootverbose)
device_printf(sc->rtsx_dev, "rtsx_send_cmd()\n");
sc->rtsx_intr_status = 0;
/* Sync command DMA buffer. */
bus_dmamap_sync(sc->rtsx_cmd_dma_tag, sc->rtsx_cmd_dmamap, BUS_DMASYNC_PREREAD);
bus_dmamap_sync(sc->rtsx_cmd_dma_tag, sc->rtsx_cmd_dmamap, BUS_DMASYNC_PREWRITE);
/* Tell the chip where the command buffer is and run the commands. */
WRITE4(sc, RTSX_HCBAR, (uint32_t)sc->rtsx_cmd_buffer);
WRITE4(sc, RTSX_HCBCTLR,
((sc->rtsx_cmd_index * 4) & 0x00ffffff) | RTSX_START_CMD | RTSX_HW_AUTO_RSP);
}
/*
* Stop previous command.
*/
static void
rtsx_stop_cmd(struct rtsx_softc *sc)
{
/* Stop command transfer. */
WRITE4(sc, RTSX_HCBCTLR, RTSX_STOP_CMD);
/* Stop DMA transfer. */
WRITE4(sc, RTSX_HDBCTLR, RTSX_STOP_DMA);
rtsx_write(sc, RTSX_DMACTL, RTSX_DMA_RST, RTSX_DMA_RST);
rtsx_write(sc, RTSX_RBCTL, RTSX_RB_FLUSH, RTSX_RB_FLUSH);
}
/*
* Clear error.
*/
static void
rtsx_clear_error(struct rtsx_softc *sc)
{
/* Clear error. */
rtsx_write(sc, RTSX_CARD_STOP, RTSX_SD_STOP | RTSX_SD_CLR_ERR,
RTSX_SD_STOP | RTSX_SD_CLR_ERR);
}
/*
* Signal end of request to mmc/mmcsd.
*/
static void
rtsx_req_done(struct rtsx_softc *sc)
{
#ifdef MMCCAM
union ccb *ccb;
#endif /* MMCCAM */
struct mmc_request *req;
req = sc->rtsx_req;
if (req->cmd->error == MMC_ERR_NONE) {
if (req->cmd->opcode == MMC_READ_SINGLE_BLOCK ||
req->cmd->opcode == MMC_READ_MULTIPLE_BLOCK)
sc->rtsx_read_count++;
else if (req->cmd->opcode == MMC_WRITE_BLOCK ||
req->cmd->opcode == MMC_WRITE_MULTIPLE_BLOCK)
sc->rtsx_write_count++;
} else {
rtsx_clear_error(sc);
}
callout_stop(&sc->rtsx_timeout_callout);
sc->rtsx_req = NULL;
#ifdef MMCCAM
ccb = sc->rtsx_ccb;
sc->rtsx_ccb = NULL;
ccb->ccb_h.status = (req->cmd->error == 0 ? CAM_REQ_CMP : CAM_REQ_CMP_ERR);
xpt_done(ccb);
#else
req->done(req);
#endif /* MMCCAM */
}
/*
* Send request.
*/
static int
rtsx_send_req(struct rtsx_softc *sc, struct mmc_command *cmd)
{
uint8_t rsp_type;
uint16_t reg;
if (bootverbose)
device_printf(sc->rtsx_dev, "rtsx_send_req() - CMD%d\n", cmd->opcode);
/* Convert response type. */
rsp_type = rtsx_response_type(cmd->flags & MMC_RSP_MASK);
if (rsp_type == 0) {
device_printf(sc->rtsx_dev, "Unknown rsp_type: 0x%lx\n", (cmd->flags & MMC_RSP_MASK));
cmd->error = MMC_ERR_INVALID;
return (MMC_ERR_INVALID);
}
rtsx_init_cmd(sc, cmd);
/* Queue command to set response type. */
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_CFG2, 0xff, rsp_type);
/* Use the ping-pong buffer (cmd buffer) for commands which do not transfer data. */
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_CARD_DATA_SOURCE,
0x01, RTSX_PINGPONG_BUFFER);
/* Queue commands to perform SD transfer. */
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_TRANSFER,
0xff, RTSX_TM_CMD_RSP | RTSX_SD_TRANSFER_START);
rtsx_push_cmd(sc, RTSX_CHECK_REG_CMD, RTSX_SD_TRANSFER,
RTSX_SD_TRANSFER_END|RTSX_SD_STAT_IDLE,
RTSX_SD_TRANSFER_END|RTSX_SD_STAT_IDLE);
/* If needed queue commands to read back card status response. */
if (rsp_type == RTSX_SD_RSP_TYPE_R2) {
/* Read data from ping-pong buffer. */
for (reg = RTSX_PPBUF_BASE2; reg < RTSX_PPBUF_BASE2 + 16; reg++)
rtsx_push_cmd(sc, RTSX_READ_REG_CMD, reg, 0, 0);
} else if (rsp_type != RTSX_SD_RSP_TYPE_R0) {
/* Read data from SD_CMDx registers. */
for (reg = RTSX_SD_CMD0; reg <= RTSX_SD_CMD4; reg++)
rtsx_push_cmd(sc, RTSX_READ_REG_CMD, reg, 0, 0);
}
rtsx_push_cmd(sc, RTSX_READ_REG_CMD, RTSX_SD_STAT1, 0, 0);
/* Set transfer OK function. */
if (sc->rtsx_intr_trans_ok == NULL)
sc->rtsx_intr_trans_ok = rtsx_ret_resp;
/* Run the command queue. */
rtsx_send_cmd(sc);
return (0);
}
/*
* Return response of previous command (case cmd->data == NULL) and complete resquest.
* This Function is called by the interrupt handler via sc->rtsx_intr_trans_ok.
*/
static void
rtsx_ret_resp(struct rtsx_softc *sc)
{
struct mmc_command *cmd;
cmd = sc->rtsx_req->cmd;
rtsx_set_resp(sc, cmd);
rtsx_req_done(sc);
}
/*
* Set response of previous command.
*/
static void
rtsx_set_resp(struct rtsx_softc *sc, struct mmc_command *cmd)
{
uint8_t rsp_type;
rsp_type = rtsx_response_type(cmd->flags & MMC_RSP_MASK);
/* Sync command DMA buffer. */
bus_dmamap_sync(sc->rtsx_cmd_dma_tag, sc->rtsx_cmd_dmamap, BUS_DMASYNC_POSTREAD);
bus_dmamap_sync(sc->rtsx_cmd_dma_tag, sc->rtsx_cmd_dmamap, BUS_DMASYNC_POSTWRITE);
/* Copy card response into mmc response buffer. */
if (ISSET(cmd->flags, MMC_RSP_PRESENT)) {
uint32_t *cmd_buffer = (uint32_t *)(sc->rtsx_cmd_dmamem);
if (bootverbose) {
device_printf(sc->rtsx_dev, "cmd_buffer: 0x%08x 0x%08x 0x%08x 0x%08x 0x%08x\n",
cmd_buffer[0], cmd_buffer[1], cmd_buffer[2], cmd_buffer[3], cmd_buffer[4]);
}
if (rsp_type == RTSX_SD_RSP_TYPE_R2) {
/* First byte is CHECK_REG_CMD return value, skip it. */
unsigned char *ptr = (unsigned char *)cmd_buffer + 1;
int i;
/*
* The controller offloads the last byte {CRC-7, end bit 1}
* of response type R2. Assign dummy CRC, 0, and end bit to this
* byte (ptr[16], goes into the LSB of resp[3] later).
*/
ptr[16] = 0x01;
/* The second byte is the status of response, skip it. */
for (i = 0; i < 4; i++)
cmd->resp[i] = be32dec(ptr + 1 + i * 4);
} else {
/*
* First byte is CHECK_REG_CMD return value, second
* one is the command op code -- we skip those.
*/
cmd->resp[0] =
((be32toh(cmd_buffer[0]) & 0x0000ffff) << 16) |
((be32toh(cmd_buffer[1]) & 0xffff0000) >> 16);
}
if (bootverbose)
device_printf(sc->rtsx_dev, "cmd->resp: 0x%08x 0x%08x 0x%08x 0x%08x\n",
cmd->resp[0], cmd->resp[1], cmd->resp[2], cmd->resp[3]);
}
}
/*
* Use the ping-pong buffer (cmd buffer) for transfer <= 512 bytes.
*/
static int
rtsx_xfer_short(struct rtsx_softc *sc, struct mmc_command *cmd)
{
int read;
if (cmd->data == NULL || cmd->data->len == 0) {
cmd->error = MMC_ERR_INVALID;
return (MMC_ERR_INVALID);
}
cmd->data->xfer_len = (cmd->data->len > RTSX_MAX_DATA_BLKLEN) ?
RTSX_MAX_DATA_BLKLEN : cmd->data->len;
read = ISSET(cmd->data->flags, MMC_DATA_READ);
if (bootverbose)
device_printf(sc->rtsx_dev, "rtsx_xfer_short() - %s xfer: %ld bytes with block size %ld\n",
read ? "Read" : "Write",
(unsigned long)cmd->data->len, (unsigned long)cmd->data->xfer_len);
if (cmd->data->len > 512) {
device_printf(sc->rtsx_dev, "rtsx_xfer_short() - length too large: %ld > 512\n",
(unsigned long)cmd->data->len);
cmd->error = MMC_ERR_INVALID;
return (MMC_ERR_INVALID);
}
if (read) {
if (sc->rtsx_discovery_mode)
rtsx_write(sc, RTSX_SD_CFG1, RTSX_CLK_DIVIDE_MASK, RTSX_CLK_DIVIDE_0);
rtsx_init_cmd(sc, cmd);
/* Queue commands to configure data transfer size. */
rtsx_set_cmd_data_len(sc, cmd->data->len / cmd->data->xfer_len, cmd->data->xfer_len);
/* From Linux: rtsx_pci_sdmmc.c sd_read_data(). */
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_CFG2, 0xff,
RTSX_SD_CALCULATE_CRC7 | RTSX_SD_CHECK_CRC16 |
RTSX_SD_NO_WAIT_BUSY_END | RTSX_SD_CHECK_CRC7 | RTSX_SD_RSP_LEN_6);
/* Use the ping-pong buffer (cmd buffer). */
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_CARD_DATA_SOURCE,
0x01, RTSX_PINGPONG_BUFFER);
/* Queue commands to perform SD transfer. */
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_TRANSFER,
0xff, RTSX_TM_NORMAL_READ | RTSX_SD_TRANSFER_START);
rtsx_push_cmd(sc, RTSX_CHECK_REG_CMD, RTSX_SD_TRANSFER,
RTSX_SD_TRANSFER_END, RTSX_SD_TRANSFER_END);
/* Set transfer OK function. */
sc->rtsx_intr_trans_ok = rtsx_ask_ppbuf_part1;
/* Run the command queue. */
rtsx_send_cmd(sc);
} else {
/* Set transfer OK function. */
sc->rtsx_intr_trans_ok = rtsx_put_ppbuf_part1;
/* Run the command queue. */
rtsx_send_req(sc, cmd);
}
return (0);
}
/*
* Use the ping-pong buffer (cmd buffer) for the transfer - first part <= 256 bytes.
* This Function is called by the interrupt handler via sc->rtsx_intr_trans_ok.
*/
static void
rtsx_ask_ppbuf_part1(struct rtsx_softc *sc)
{
struct mmc_command *cmd;
uint16_t reg = RTSX_PPBUF_BASE2;
int len;
int i;
cmd = sc->rtsx_req->cmd;
len = (cmd->data->len > RTSX_HOSTCMD_MAX) ? RTSX_HOSTCMD_MAX : cmd->data->len;
sc->rtsx_cmd_index = 0;
for (i = 0; i < len; i++) {
rtsx_push_cmd(sc, RTSX_READ_REG_CMD, reg++, 0, 0);
}
/* Set transfer OK function. */
sc->rtsx_intr_trans_ok = rtsx_get_ppbuf_part1;
/* Run the command queue. */
rtsx_send_cmd(sc);
}
/*
* Get the data from the ping-pong buffer (cmd buffer) - first part <= 256 bytes.
* This Function is called by the interrupt handler via sc->rtsx_intr_trans_ok.
*/
static void
rtsx_get_ppbuf_part1(struct rtsx_softc *sc)
{
struct mmc_command *cmd;
uint8_t *ptr;
int len;
cmd = sc->rtsx_req->cmd;
ptr = cmd->data->data;
len = (cmd->data->len > RTSX_HOSTCMD_MAX) ? RTSX_HOSTCMD_MAX : cmd->data->len;
/* Sync command DMA buffer. */
bus_dmamap_sync(sc->rtsx_cmd_dma_tag, sc->rtsx_cmd_dmamap, BUS_DMASYNC_POSTREAD);
bus_dmamap_sync(sc->rtsx_cmd_dma_tag, sc->rtsx_cmd_dmamap, BUS_DMASYNC_POSTWRITE);
memcpy(ptr, sc->rtsx_cmd_dmamem, len);
len = (cmd->data->len > RTSX_HOSTCMD_MAX) ? cmd->data->len - RTSX_HOSTCMD_MAX : 0;
/* Use the ping-pong buffer (cmd buffer) for the transfer - second part > 256 bytes. */
if (len > 0) {
uint16_t reg = RTSX_PPBUF_BASE2 + RTSX_HOSTCMD_MAX;
int i;
sc->rtsx_cmd_index = 0;
for (i = 0; i < len; i++) {
rtsx_push_cmd(sc, RTSX_READ_REG_CMD, reg++, 0, 0);
}
/* Set transfer OK function. */
sc->rtsx_intr_trans_ok = rtsx_get_ppbuf_part2;
/* Run the command queue. */
rtsx_send_cmd(sc);
} else {
if (bootverbose && cmd->opcode == ACMD_SEND_SCR) {
uint8_t *ptr = cmd->data->data;
device_printf(sc->rtsx_dev, "SCR: 0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
ptr[0], ptr[1], ptr[2], ptr[3],
ptr[4], ptr[5], ptr[6], ptr[7]);
}
if (sc->rtsx_discovery_mode)
rtsx_write(sc, RTSX_SD_CFG1, RTSX_CLK_DIVIDE_MASK, RTSX_CLK_DIVIDE_128);
rtsx_req_done(sc);
}
}
/*
* Get the data from the ping-pong buffer (cmd buffer) - second part > 256 bytes.
* This Function is called by the interrupt handler via sc->rtsx_intr_trans_ok.
*/
static void
rtsx_get_ppbuf_part2(struct rtsx_softc *sc)
{
struct mmc_command *cmd;
uint8_t *ptr;
int len;
cmd = sc->rtsx_req->cmd;
ptr = cmd->data->data;
ptr += RTSX_HOSTCMD_MAX;
len = cmd->data->len - RTSX_HOSTCMD_MAX;
/* Sync command DMA buffer. */
bus_dmamap_sync(sc->rtsx_cmd_dma_tag, sc->rtsx_cmd_dmamap, BUS_DMASYNC_POSTREAD);
bus_dmamap_sync(sc->rtsx_cmd_dma_tag, sc->rtsx_cmd_dmamap, BUS_DMASYNC_POSTWRITE);
memcpy(ptr, sc->rtsx_cmd_dmamem, len);
if (sc->rtsx_discovery_mode)
rtsx_write(sc, RTSX_SD_CFG1, RTSX_CLK_DIVIDE_MASK, RTSX_CLK_DIVIDE_128);
rtsx_req_done(sc);
}
/*
* Use the ping-pong buffer (cmd buffer) for transfer - first part <= 256 bytes.
* This Function is called by the interrupt handler via sc->rtsx_intr_trans_ok.
*/
static void
rtsx_put_ppbuf_part1(struct rtsx_softc *sc)
{
struct mmc_command *cmd;
uint16_t reg = RTSX_PPBUF_BASE2;
uint8_t *ptr;
int len;
int i;
cmd = sc->rtsx_req->cmd;
ptr = cmd->data->data;
len = (cmd->data->len > RTSX_HOSTCMD_MAX) ? RTSX_HOSTCMD_MAX : cmd->data->len;
rtsx_set_resp(sc, cmd);
sc->rtsx_cmd_index = 0;
for (i = 0; i < len; i++) {
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, reg++, 0xff, *ptr);
ptr++;
}
/* Set transfer OK function. */
if (cmd->data->len > RTSX_HOSTCMD_MAX)
sc->rtsx_intr_trans_ok = rtsx_put_ppbuf_part2;
else
sc->rtsx_intr_trans_ok = rtsx_write_ppbuf;
/* Run the command queue. */
rtsx_send_cmd(sc);
}
/*
* Use the ping-pong buffer (cmd buffer) for transfer - second part > 256 bytes.
* This Function is called by the interrupt handler via sc->rtsx_intr_trans_ok.
*/
static void
rtsx_put_ppbuf_part2(struct rtsx_softc *sc)
{
struct mmc_command *cmd;
uint16_t reg = RTSX_PPBUF_BASE2 + RTSX_HOSTCMD_MAX;
uint8_t *ptr;
int len;
int i;
cmd = sc->rtsx_req->cmd;
ptr = cmd->data->data;
ptr += RTSX_HOSTCMD_MAX;
len = cmd->data->len - RTSX_HOSTCMD_MAX;
sc->rtsx_cmd_index = 0;
for (i = 0; i < len; i++) {
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, reg++, 0xff, *ptr);
ptr++;
}
/* Set transfer OK function. */
sc->rtsx_intr_trans_ok = rtsx_write_ppbuf;
/* Run the command queue. */
rtsx_send_cmd(sc);
}
/*
* Write the data previously given via the ping-pong buffer on the card.
* This Function is called by the interrupt handler via sc->rtsx_intr_trans_ok.
*/
static void
rtsx_write_ppbuf(struct rtsx_softc *sc)
{
struct mmc_command *cmd;
cmd = sc->rtsx_req->cmd;
sc->rtsx_cmd_index = 0;
/* Queue commands to configure data transfer size. */
rtsx_set_cmd_data_len(sc, cmd->data->len / cmd->data->xfer_len, cmd->data->xfer_len);
/* From Linux: rtsx_pci_sdmmc.c sd_write_data(). */
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_CFG2, 0xff,
RTSX_SD_CALCULATE_CRC7 | RTSX_SD_CHECK_CRC16 |
RTSX_SD_NO_WAIT_BUSY_END | RTSX_SD_CHECK_CRC7 | RTSX_SD_RSP_LEN_0);
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_TRANSFER, 0xff,
RTSX_TM_AUTO_WRITE3 | RTSX_SD_TRANSFER_START);
rtsx_push_cmd(sc, RTSX_CHECK_REG_CMD, RTSX_SD_TRANSFER,
RTSX_SD_TRANSFER_END, RTSX_SD_TRANSFER_END);
/* Set transfer OK function. */
sc->rtsx_intr_trans_ok = rtsx_req_done;
/* Run the command queue. */
rtsx_send_cmd(sc);
}
/*
* Use the data buffer for transfer > 512 bytes.
*/
static int
rtsx_xfer(struct rtsx_softc *sc, struct mmc_command *cmd)
{
int read = ISSET(cmd->data->flags, MMC_DATA_READ);
cmd->data->xfer_len = (cmd->data->len > RTSX_MAX_DATA_BLKLEN) ?
RTSX_MAX_DATA_BLKLEN : cmd->data->len;
if (bootverbose)
device_printf(sc->rtsx_dev, "rtsx_xfer() - %s xfer: %ld bytes with block size %ld\n",
read ? "Read" : "Write",
(unsigned long)cmd->data->len, (unsigned long)cmd->data->xfer_len);
if (cmd->data->len > RTSX_DMA_DATA_BUFSIZE) {
device_printf(sc->rtsx_dev, "rtsx_xfer() length too large: %ld > %d\n",
(unsigned long)cmd->data->len, RTSX_DMA_DATA_BUFSIZE);
cmd->error = MMC_ERR_INVALID;
return (MMC_ERR_INVALID);
}
if (!read) {
/* Set transfer OK function. */
sc->rtsx_intr_trans_ok = rtsx_xfer_begin;
/* Run the command queue. */
rtsx_send_req(sc, cmd);
} else {
rtsx_xfer_start(sc);
}
return (0);
}
/*
* Get request response and start dma data transfer (write command).
* This Function is called by the interrupt handler via sc->rtsx_intr_trans_ok.
*/
static void
rtsx_xfer_begin(struct rtsx_softc *sc)
{
struct mmc_command *cmd;
cmd = sc->rtsx_req->cmd;
if (bootverbose)
device_printf(sc->rtsx_dev, "rtsx_xfer_begin() - CMD%d\n", cmd->opcode);
rtsx_set_resp(sc, cmd);
rtsx_xfer_start(sc);
}
/*
* Start dma data transfer.
*/
static void
rtsx_xfer_start(struct rtsx_softc *sc)
{
struct mmc_command *cmd;
int read;
uint8_t cfg2;
int dma_dir;
int tmode;
cmd = sc->rtsx_req->cmd;
read = ISSET(cmd->data->flags, MMC_DATA_READ);
/* Configure DMA transfer mode parameters. */
if (cmd->opcode == MMC_READ_MULTIPLE_BLOCK)
cfg2 = RTSX_SD_CHECK_CRC16 | RTSX_SD_NO_WAIT_BUSY_END | RTSX_SD_RSP_LEN_6;
else
cfg2 = RTSX_SD_CHECK_CRC16 | RTSX_SD_NO_WAIT_BUSY_END | RTSX_SD_RSP_LEN_0;
if (read) {
dma_dir = RTSX_DMA_DIR_FROM_CARD;
/*
* Use transfer mode AUTO_READ1, which assume we not
* already send the read command and don't need to send
* CMD 12 manually after read.
*/
tmode = RTSX_TM_AUTO_READ1;
cfg2 |= RTSX_SD_CALCULATE_CRC7 | RTSX_SD_CHECK_CRC7;
rtsx_init_cmd(sc, cmd);
} else {
dma_dir = RTSX_DMA_DIR_TO_CARD;
/*
* Use transfer mode AUTO_WRITE3, wich assumes we've already
* sent the write command and gotten the response, and will
* send CMD 12 manually after writing.
*/
tmode = RTSX_TM_AUTO_WRITE3;
cfg2 |= RTSX_SD_NO_CALCULATE_CRC7 | RTSX_SD_NO_CHECK_CRC7;
sc->rtsx_cmd_index = 0;
}
/* Queue commands to configure data transfer size. */
rtsx_set_cmd_data_len(sc, cmd->data->len / cmd->data->xfer_len, cmd->data->xfer_len);
/* Configure DMA controller. */
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_IRQSTAT0,
RTSX_DMA_DONE_INT, RTSX_DMA_DONE_INT);
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_DMATC3,
0xff, cmd->data->len >> 24);
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_DMATC2,
0xff, cmd->data->len >> 16);
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_DMATC1,
0xff, cmd->data->len >> 8);
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_DMATC0,
0xff, cmd->data->len);
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_DMACTL,
RTSX_DMA_EN | RTSX_DMA_DIR | RTSX_DMA_PACK_SIZE_MASK,
RTSX_DMA_EN | dma_dir | RTSX_DMA_512);
/* Use the DMA ring buffer for commands which transfer data. */
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_CARD_DATA_SOURCE,
0x01, RTSX_RING_BUFFER);
/* Queue command to set response type. */
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_CFG2, 0xff, cfg2);
/* Queue commands to perform SD transfer. */
rtsx_push_cmd(sc, RTSX_WRITE_REG_CMD, RTSX_SD_TRANSFER,
0xff, tmode | RTSX_SD_TRANSFER_START);
rtsx_push_cmd(sc, RTSX_CHECK_REG_CMD, RTSX_SD_TRANSFER,
RTSX_SD_TRANSFER_END, RTSX_SD_TRANSFER_END);
/* Run the command queue. */
rtsx_send_cmd(sc);
if (!read)
memcpy(sc->rtsx_data_dmamem, cmd->data->data, cmd->data->len);
/* Sync data DMA buffer. */
bus_dmamap_sync(sc->rtsx_data_dma_tag, sc->rtsx_data_dmamap, BUS_DMASYNC_PREREAD);
bus_dmamap_sync(sc->rtsx_data_dma_tag, sc->rtsx_data_dmamap, BUS_DMASYNC_PREWRITE);
/* Set transfer OK function. */
sc->rtsx_intr_trans_ok = rtsx_xfer_finish;
/* Tell the chip where the data buffer is and run the transfer. */
WRITE4(sc, RTSX_HDBAR, sc->rtsx_data_buffer);
WRITE4(sc, RTSX_HDBCTLR, RTSX_TRIG_DMA | (read ? RTSX_DMA_READ : 0) |
(cmd->data->len & 0x00ffffff));
}
/*
* Finish dma data transfer.
* This Function is called by the interrupt handler via sc->rtsx_intr_trans_ok.
*/
static void
rtsx_xfer_finish(struct rtsx_softc *sc)
{
struct mmc_command *cmd;
int read;
cmd = sc->rtsx_req->cmd;
if (bootverbose)
device_printf(sc->rtsx_dev, "rtsx_xfer_finish() - CMD%d\n", cmd->opcode);
read = ISSET(cmd->data->flags, MMC_DATA_READ);
/* Sync data DMA buffer. */
bus_dmamap_sync(sc->rtsx_data_dma_tag, sc->rtsx_data_dmamap, BUS_DMASYNC_POSTREAD);
bus_dmamap_sync(sc->rtsx_data_dma_tag, sc->rtsx_data_dmamap, BUS_DMASYNC_POSTWRITE);
if (read) {
memcpy(cmd->data->data, sc->rtsx_data_dmamem, cmd->data->len);
rtsx_req_done(sc);
} else {
/* Send CMD12 after AUTO_WRITE3 (see mmcsd_rw() in mmcsd.c) */
/* and complete request. */
sc->rtsx_intr_trans_ok = NULL;
rtsx_send_req(sc, sc->rtsx_req->stop);
}
}
/*
* Manage request timeout.
*/
static void
rtsx_timeout(void *arg)
{
struct rtsx_softc *sc;
sc = (struct rtsx_softc *)arg;
if (sc->rtsx_req != NULL) {
device_printf(sc->rtsx_dev, "Controller timeout for CMD%u\n",
sc->rtsx_req->cmd->opcode);
sc->rtsx_req->cmd->error = MMC_ERR_TIMEOUT;
rtsx_stop_cmd(sc);
rtsx_req_done(sc);
} else {
device_printf(sc->rtsx_dev, "Controller timeout!\n");
}
}
#ifdef MMCCAM
static void
rtsx_cam_action(struct cam_sim *sim, union ccb *ccb)
{
struct rtsx_softc *sc;
sc = cam_sim_softc(sim);
if (sc == NULL) {
ccb->ccb_h.status = CAM_SEL_TIMEOUT;
xpt_done(ccb);
return;
}
switch (ccb->ccb_h.func_code) {
case XPT_PATH_INQ:
{
struct ccb_pathinq *cpi = &ccb->cpi;
cpi->version_num = 1; /* SIM driver version number - now all drivers use 1 */
cpi->hba_inquiry = 0; /* bitmask of features supported by the controller */
cpi->target_sprt = 0; /* flags for target mode support */
cpi->hba_misc = PIM_NOBUSRESET | PIM_SEQSCAN;
cpi->hba_eng_cnt = 0; /* HBA engine count - always set to 0 */
cpi->max_target = 0; /* maximal supported target ID */
cpi->max_lun = 0; /* maximal supported LUN ID */
cpi->initiator_id = 1; /* the SCSI ID of the controller itself */
cpi->maxio = RTSX_DMA_DATA_BUFSIZE; /* maximum io size */
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN); /* vendor ID of the SIM */
strncpy(cpi->hba_vid, "Realtek", HBA_IDLEN); /* vendor ID of the HBA */
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN); /* device name for SIM */
cpi->unit_number = cam_sim_unit(sim); /* controller unit number */
cpi->bus_id = cam_sim_bus(sim); /* bus number */
cpi->protocol = PROTO_MMCSD;
cpi->protocol_version = SCSI_REV_0;
cpi->transport = XPORT_MMCSD;
cpi->transport_version = 1;
cpi->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_GET_TRAN_SETTINGS:
{
struct ccb_trans_settings *cts = &ccb->cts;
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_cam_action() - got XPT_GET_TRAN_SETTINGS\n");
cts->protocol = PROTO_MMCSD;
cts->protocol_version = 1;
cts->transport = XPORT_MMCSD;
cts->transport_version = 1;
cts->xport_specific.valid = 0;
cts->proto_specific.mmc.host_ocr = sc->rtsx_host.host_ocr;
cts->proto_specific.mmc.host_f_min = sc->rtsx_host.f_min;
cts->proto_specific.mmc.host_f_max = sc->rtsx_host.f_max;
cts->proto_specific.mmc.host_caps = sc->rtsx_host.caps;
#if __FreeBSD__ > 12
cts->proto_specific.mmc.host_max_data = RTSX_DMA_DATA_BUFSIZE / MMC_SECTOR_SIZE;
#endif
memcpy(&cts->proto_specific.mmc.ios, &sc->rtsx_host.ios, sizeof(struct mmc_ios));
ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_SET_TRAN_SETTINGS:
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_cam_action() - got XPT_SET_TRAN_SETTINGS\n");
/* Apply settings and set ccb->ccb_h.status accordingly. */
rtsx_cam_set_tran_settings(sc, ccb);
break;
case XPT_RESET_BUS:
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "got XPT_RESET_BUS, ACK it...\n");
ccb->ccb_h.status = CAM_REQ_CMP;
break;
case XPT_MMC_IO:
/*
* Here is the HW-dependent part of sending
* the command to the underlying h/w.
* At some point in the future an interrupt comes
* and the request will be marked as completed.
*/
ccb->ccb_h.status = CAM_REQ_INPROG;
rtsx_cam_request(sc, ccb);
return;
default:
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
}
xpt_done(ccb);
return;
}
static void
rtsx_cam_poll(struct cam_sim *sim)
{
return;
}
/*
* Apply settings and set ccb->ccb_h.status accordingly.
*/
static void
rtsx_cam_set_tran_settings(struct rtsx_softc *sc, union ccb *ccb)
{
struct mmc_ios *ios;
struct mmc_ios *new_ios;
struct ccb_trans_settings_mmc *cts;
ios = &sc->rtsx_host.ios;
cts = &ccb->cts.proto_specific.mmc;
new_ios = &cts->ios;
/* Update only requested fields */
if (cts->ios_valid & MMC_CLK) {
ios->clock = new_ios->clock;
sc->rtsx_ios_clock = -1; /* To be updated by rtsx_mmcbr_update_ios(). */
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_cam_set_tran_settings() - clock: %u\n", ios->clock);
}
if (cts->ios_valid & MMC_VDD) {
ios->vdd = new_ios->vdd;
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_cam_set_tran_settings() - vdd: %d\n", ios->vdd);
}
if (cts->ios_valid & MMC_CS) {
ios->chip_select = new_ios->chip_select;
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_cam_set_tran_settings() - chip_select: %d\n", ios->chip_select);
}
if (cts->ios_valid & MMC_BW) {
ios->bus_width = new_ios->bus_width;
sc->rtsx_ios_bus_width = -1; /* To be updated by rtsx_mmcbr_update_ios(). */
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_cam_set_tran_settings() - bus width: %d\n", ios->bus_width);
}
if (cts->ios_valid & MMC_PM) {
ios->power_mode = new_ios->power_mode;
sc->rtsx_ios_power_mode = -1; /* To be updated by rtsx_mmcbr_update_ios(). */
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_cam_set_tran_settings() - power mode: %d\n", ios->power_mode);
}
if (cts->ios_valid & MMC_BT) {
ios->timing = new_ios->timing;
sc->rtsx_ios_timing = -1; /* To be updated by rtsx_mmcbr_update_ios(). */
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_cam_set_tran_settings() - timing: %d\n", ios->timing);
}
if (cts->ios_valid & MMC_BM) {
ios->bus_mode = new_ios->bus_mode;
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_cam_set_tran_settings() - bus mode: %d\n", ios->bus_mode);
}
#if __FreeBSD__ > 12
if (cts->ios_valid & MMC_VCCQ) {
ios->vccq = new_ios->vccq;
sc->rtsx_ios_vccq = -1; /* To be updated by rtsx_mmcbr_update_ios(). */
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_cam_set_tran_settings() - vccq: %d\n", ios->vccq);
}
#endif
if (rtsx_mmcbr_update_ios(sc->rtsx_dev, NULL) == 0)
ccb->ccb_h.status = CAM_REQ_CMP;
else
ccb->ccb_h.status = CAM_REQ_CMP_ERR;
return;
}
/*
* Build a request and run it.
*/
static void
rtsx_cam_request(struct rtsx_softc *sc, union ccb *ccb)
{
RTSX_LOCK(sc);
if (sc->rtsx_ccb != NULL) {
RTSX_UNLOCK(sc);
ccb->ccb_h.status = CAM_BUSY; /* i.e. CAM_REQ_CMP | CAM_REQ_CMP_ERR */
return;
}
sc->rtsx_ccb = ccb;
sc->rtsx_cam_req.cmd = &ccb->mmcio.cmd;
sc->rtsx_cam_req.stop = &ccb->mmcio.stop;
RTSX_UNLOCK(sc);
rtsx_mmcbr_request(sc->rtsx_dev, NULL, &sc->rtsx_cam_req);
return;
}
#endif /* MMCCAM */
static int
rtsx_read_ivar(device_t bus, device_t child, int which, uintptr_t *result)
{
struct rtsx_softc *sc;
sc = device_get_softc(bus);
switch (which) {
case MMCBR_IVAR_BUS_MODE: /* ivar 0 - 1 = opendrain, 2 = pushpull */
*result = sc->rtsx_host.ios.bus_mode;
break;
case MMCBR_IVAR_BUS_WIDTH: /* ivar 1 - 0 = 1b 2 = 4b, 3 = 8b */
*result = sc->rtsx_host.ios.bus_width;
break;
case MMCBR_IVAR_CHIP_SELECT: /* ivar 2 - O = dontcare, 1 = cs_high, 2 = cs_low */
*result = sc->rtsx_host.ios.chip_select;
break;
case MMCBR_IVAR_CLOCK: /* ivar 3 - clock in Hz */
*result = sc->rtsx_host.ios.clock;
break;
case MMCBR_IVAR_F_MIN: /* ivar 4 */
*result = sc->rtsx_host.f_min;
break;
case MMCBR_IVAR_F_MAX: /* ivar 5 */
*result = sc->rtsx_host.f_max;
break;
case MMCBR_IVAR_HOST_OCR: /* ivar 6 - host operation conditions register */
*result = sc->rtsx_host.host_ocr;
break;
case MMCBR_IVAR_MODE: /* ivar 7 - 0 = mode_mmc, 1 = mode_sd */
*result = sc->rtsx_host.mode;
break;
case MMCBR_IVAR_OCR: /* ivar 8 - operation conditions register */
*result = sc->rtsx_host.ocr;
break;
case MMCBR_IVAR_POWER_MODE: /* ivar 9 - 0 = off, 1 = up, 2 = on */
*result = sc->rtsx_host.ios.power_mode;
break;
case MMCBR_IVAR_VDD: /* ivar 11 - voltage power pin */
*result = sc->rtsx_host.ios.vdd;
break;
case MMCBR_IVAR_VCCQ: /* ivar 12 - signaling: 0 = 1.20V, 1 = 1.80V, 2 = 3.30V */
*result = sc->rtsx_host.ios.vccq;
break;
case MMCBR_IVAR_CAPS: /* ivar 13 */
*result = sc->rtsx_host.caps;
break;
case MMCBR_IVAR_TIMING: /* ivar 14 - 0 = normal, 1 = timing_hs, ... */
*result = sc->rtsx_host.ios.timing;
break;
case MMCBR_IVAR_MAX_DATA: /* ivar 15 */
*result = RTSX_DMA_DATA_BUFSIZE / MMC_SECTOR_SIZE;
break;
case MMCBR_IVAR_RETUNE_REQ: /* ivar 10 */
case MMCBR_IVAR_MAX_BUSY_TIMEOUT: /* ivar 16 */
default:
return (EINVAL);
}
if (bootverbose)
device_printf(bus, "Read ivar #%d, value %#x / #%d\n",
which, *(int *)result, *(int *)result);
return (0);
}
static int
rtsx_write_ivar(device_t bus, device_t child, int which, uintptr_t value)
{
struct rtsx_softc *sc;
if (bootverbose)
device_printf(bus, "Write ivar #%d, value %#x / #%d\n",
which, (int)value, (int)value);
sc = device_get_softc(bus);
switch (which) {
case MMCBR_IVAR_BUS_MODE: /* ivar 0 - 1 = opendrain, 2 = pushpull */
sc->rtsx_host.ios.bus_mode = value;
break;
case MMCBR_IVAR_BUS_WIDTH: /* ivar 1 - 0 = 1b 2 = 4b, 3 = 8b */
sc->rtsx_host.ios.bus_width = value;
sc->rtsx_ios_bus_width = -1; /* To be updated on next rtsx_mmcbr_update_ios(). */
break;
case MMCBR_IVAR_CHIP_SELECT: /* ivar 2 - O = dontcare, 1 = cs_high, 2 = cs_low */
sc->rtsx_host.ios.chip_select = value;
break;
case MMCBR_IVAR_CLOCK: /* ivar 3 - clock in Hz */
sc->rtsx_host.ios.clock = value;
sc->rtsx_ios_clock = -1; /* To be updated on next rtsx_mmcbr_update_ios(). */
break;
case MMCBR_IVAR_MODE: /* ivar 7 - 0 = mode_mmc, 1 = mode_sd */
sc->rtsx_host.mode = value;
break;
case MMCBR_IVAR_OCR: /* ivar 8 - operation conditions register */
sc->rtsx_host.ocr = value;
break;
case MMCBR_IVAR_POWER_MODE: /* ivar 9 - 0 = off, 1 = up, 2 = on */
sc->rtsx_host.ios.power_mode = value;
sc->rtsx_ios_power_mode = -1; /* To be updated on next rtsx_mmcbr_update_ios(). */
break;
case MMCBR_IVAR_VDD: /* ivar 11 - voltage power pin */
sc->rtsx_host.ios.vdd = value;
break;
case MMCBR_IVAR_VCCQ: /* ivar 12 - signaling: 0 = 1.20V, 1 = 1.80V, 2 = 3.30V */
sc->rtsx_host.ios.vccq = value;
sc->rtsx_ios_vccq = value; /* rtsx_mmcbr_switch_vccq() will be called by mmc.c (MMCCAM undef). */
break;
case MMCBR_IVAR_TIMING: /* ivar 14 - 0 = normal, 1 = timing_hs, ... */
sc->rtsx_host.ios.timing = value;
sc->rtsx_ios_timing = -1; /* To be updated on next rtsx_mmcbr_update_ios(). */
break;
/* These are read-only. */
case MMCBR_IVAR_F_MIN: /* ivar 4 */
case MMCBR_IVAR_F_MAX: /* ivar 5 */
case MMCBR_IVAR_HOST_OCR: /* ivar 6 - host operation conditions register */
case MMCBR_IVAR_RETUNE_REQ: /* ivar 10 */
case MMCBR_IVAR_CAPS: /* ivar 13 */
case MMCBR_IVAR_MAX_DATA: /* ivar 15 */
case MMCBR_IVAR_MAX_BUSY_TIMEOUT: /* ivar 16 */
default:
return (EINVAL);
}
return (0);
}
static int
rtsx_mmcbr_update_ios(device_t bus, device_t child__unused)
{
struct rtsx_softc *sc;
struct mmc_ios *ios;
int error;
sc = device_get_softc(bus);
ios = &sc->rtsx_host.ios;
if (bootverbose)
device_printf(bus, "rtsx_mmcbr_update_ios()\n");
/* if MMCBR_IVAR_BUS_WIDTH updated. */
if (sc->rtsx_ios_bus_width < 0) {
sc->rtsx_ios_bus_width = ios->bus_width;
if ((error = rtsx_set_bus_width(sc, ios->bus_width)))
return (error);
}
/* if MMCBR_IVAR_POWER_MODE updated. */
if (sc->rtsx_ios_power_mode < 0) {
sc->rtsx_ios_power_mode = ios->power_mode;
switch (ios->power_mode) {
case power_off:
if ((error = rtsx_bus_power_off(sc)))
return (error);
break;
case power_up:
if ((error = rtsx_bus_power_on(sc)))
return (error);
break;
case power_on:
if ((error = rtsx_bus_power_on(sc)))
return (error);
break;
}
}
sc->rtsx_double_clk = true;
sc->rtsx_vpclk = false;
/* if MMCBR_IVAR_TIMING updated. */
if (sc->rtsx_ios_timing < 0) {
sc->rtsx_ios_timing = ios->timing;
if ((error = rtsx_set_sd_timing(sc, ios->timing)))
return (error);
}
/* if MMCBR_IVAR_CLOCK updated, must be after rtsx_set_sd_timing() */
if (sc->rtsx_ios_clock < 0) {
sc->rtsx_ios_clock = ios->clock;
if ((error = rtsx_set_sd_clock(sc, ios->clock)))
return (error);
}
/* if MMCCAM and vccq updated */
if (sc->rtsx_ios_vccq < 0) {
sc->rtsx_ios_vccq = ios->vccq;
if ((error = rtsx_mmcbr_switch_vccq(sc->rtsx_dev, NULL)))
return (error);
}
return (0);
}
/*
* Set output stage logic power voltage.
*/
static int
rtsx_mmcbr_switch_vccq(device_t bus, device_t child __unused)
{
struct rtsx_softc *sc;
int vccq = 0;
int error;
sc = device_get_softc(bus);
switch (sc->rtsx_host.ios.vccq) {
case vccq_120:
vccq = 120;
break;
case vccq_180:
vccq = 180;
break;
case vccq_330:
vccq = 330;
break;
};
/* It seems it is always vccq_330. */
if (vccq == 330) {
switch (sc->rtsx_device_id) {
uint16_t val;
case RTSX_RTS5227:
if ((error = rtsx_write_phy(sc, 0x08, 0x4FE4)))
return (error);
if ((error = rtsx_rts5227_fill_driving(sc)))
return (error);
break;
case RTSX_RTS5209:
case RTSX_RTS5229:
RTSX_BITOP(sc, RTSX_SD30_CMD_DRIVE_SEL, RTSX_SD30_DRIVE_SEL_MASK, sc->rtsx_sd30_drive_sel_3v3);
if ((error = rtsx_write_phy(sc, 0x08, 0x4FE4)))
return (error);
break;
case RTSX_RTS522A:
if ((error = rtsx_write_phy(sc, 0x08, 0x57E4)))
return (error);
if ((error = rtsx_rts5227_fill_driving(sc)))
return (error);
break;
case RTSX_RTS525A:
RTSX_BITOP(sc, RTSX_LDO_CONFIG2, RTSX_LDO_D3318_MASK, RTSX_LDO_D3318_33V);
RTSX_BITOP(sc, RTSX_SD_PAD_CTL, RTSX_SD_IO_USING_1V8, 0);
if ((error = rtsx_rts5249_fill_driving(sc)))
return (error);
break;
case RTSX_RTS5249:
if ((error = rtsx_read_phy(sc, RTSX_PHY_TUNE, &val)))
return (error);
if ((error = rtsx_write_phy(sc, RTSX_PHY_TUNE,
(val & RTSX_PHY_TUNE_VOLTAGE_MASK) | RTSX_PHY_TUNE_VOLTAGE_3V3)))
return (error);
if ((error = rtsx_rts5249_fill_driving(sc)))
return (error);
break;
case RTSX_RTL8402:
RTSX_BITOP(sc, RTSX_SD30_CMD_DRIVE_SEL, RTSX_SD30_DRIVE_SEL_MASK, sc->rtsx_sd30_drive_sel_3v3);
RTSX_BITOP(sc, RTSX_LDO_CTL,
(RTSX_BPP_ASIC_MASK << RTSX_BPP_SHIFT_8402) | RTSX_BPP_PAD_MASK,
(RTSX_BPP_ASIC_3V3 << RTSX_BPP_SHIFT_8402) | RTSX_BPP_PAD_3V3);
break;
case RTSX_RTL8411:
case RTSX_RTL8411B:
RTSX_BITOP(sc, RTSX_SD30_CMD_DRIVE_SEL, RTSX_SD30_DRIVE_SEL_MASK, sc->rtsx_sd30_drive_sel_3v3);
RTSX_BITOP(sc, RTSX_LDO_CTL,
(RTSX_BPP_ASIC_MASK << RTSX_BPP_SHIFT_8411) | RTSX_BPP_PAD_MASK,
(RTSX_BPP_ASIC_3V3 << RTSX_BPP_SHIFT_8411) | RTSX_BPP_PAD_3V3);
break;
}
DELAY(300);
}
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_mmcbr_switch_vccq(%d)\n", vccq);
return (0);
}
/*
* Tune card if bus_timing_uhs_sdr50.
*/
static int
rtsx_mmcbr_tune(device_t bus, device_t child __unused, bool hs400)
{
struct rtsx_softc *sc;
uint32_t raw_phase_map[RTSX_RX_TUNING_CNT] = {0};
uint32_t phase_map;
uint8_t final_phase;
int i;
sc = device_get_softc(bus);
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_mmcbr_tune() - hs400 is %s\n",
(hs400) ? "true" : "false");
if (sc->rtsx_ios_timing != bus_timing_uhs_sdr50)
return (0);
sc->rtsx_tuning_mode = true;
switch (sc->rtsx_device_id) {
case RTSX_RTS5209:
case RTSX_RTS5227:
rtsx_sd_change_tx_phase(sc, 27);
break;
case RTSX_RTS522A:
rtsx_sd_change_tx_phase(sc, 20);
break;
case RTSX_RTS5229:
rtsx_sd_change_tx_phase(sc, 27);
break;
case RTSX_RTS525A:
case RTSX_RTS5249:
rtsx_sd_change_tx_phase(sc, 29);
break;
case RTSX_RTL8402:
case RTSX_RTL8411:
case RTSX_RTL8411B:
rtsx_sd_change_tx_phase(sc, 7);
break;
}
/* trying rx tuning for bus_timing_uhs_sdr50. */
for (i = 0; i < RTSX_RX_TUNING_CNT; i++) {
rtsx_sd_tuning_rx_phase(sc, &(raw_phase_map[i]));
if (raw_phase_map[i] == 0)
break;
}
phase_map = 0xffffffff;
for (i = 0; i < RTSX_RX_TUNING_CNT; i++) {
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_mmcbr_tune() - RX raw_phase_map[%d]: 0x%08x\n",
i, raw_phase_map[i]);
phase_map &= raw_phase_map[i];
}
if (bootverbose || sc->rtsx_debug)
device_printf(sc->rtsx_dev, "rtsx_mmcbr_tune() - RX phase_map: 0x%08x\n", phase_map);
if (phase_map) {
final_phase = rtsx_sd_search_final_rx_phase(sc, phase_map);
if (final_phase != 0xff) {
if (sc->rtsx_debug == 1) {
sc->rtsx_debug = 2;
rtsx_sd_change_rx_phase(sc, final_phase);
sc->rtsx_debug = 1;
} else {
rtsx_sd_change_rx_phase(sc, final_phase);
}
}
}
sc->rtsx_tuning_mode = false;
return (0);
}
static int
rtsx_mmcbr_retune(device_t bus, device_t child __unused, bool reset __unused)
{
struct rtsx_softc *sc;
sc = device_get_softc(bus);
if (bootverbose)
device_printf(sc->rtsx_dev, "rtsx_mmcbr_retune()\n");
return (0);
}
static int
rtsx_mmcbr_request(device_t bus, device_t child __unused, struct mmc_request *req)
{
struct rtsx_softc *sc;
struct mmc_command *cmd;
int error;
sc = device_get_softc(bus);
RTSX_LOCK(sc);
if (sc->rtsx_req != NULL) {
RTSX_UNLOCK(sc);
return (EBUSY);
}
sc->rtsx_req = req;
cmd = req->cmd;
cmd->error = error = MMC_ERR_NONE;
sc->rtsx_intr_status = 0;
sc->rtsx_intr_trans_ok = NULL;
sc->rtsx_intr_trans_ko = rtsx_req_done;
if (bootverbose)
device_printf(sc->rtsx_dev, "rtsx_mmcbr_request(CMD%u arg %#x, flags %#x, dlen %u, dflags %#x)\n",
cmd->opcode, cmd->arg, cmd->flags,
cmd->data != NULL ? (unsigned int)cmd->data->len : 0,
cmd->data != NULL ? cmd->data->flags : 0);
/* Check if card present. */
if (!ISSET(sc->rtsx_flags, RTSX_F_CARD_PRESENT)) {
cmd->error = error = MMC_ERR_FAILED;
goto end;
}
/* Refuse SDIO probe if the chip doesn't support SDIO. */
if (cmd->opcode == IO_SEND_OP_COND &&
!ISSET(sc->rtsx_flags, RTSX_F_SDIO_SUPPORT)) {
cmd->error = error = MMC_ERR_INVALID;
goto end;
}
/* Return MMC_ERR_TIMEOUT for SD_IO_RW_DIRECT and IO_SEND_OP_COND. */
if (cmd->opcode == SD_IO_RW_DIRECT || cmd->opcode == IO_SEND_OP_COND) {
cmd->error = error = MMC_ERR_TIMEOUT;
goto end;
}
/* Select SD card. */
RTSX_BITOP(sc, RTSX_CARD_SELECT, 0x07, RTSX_SD_MOD_SEL);
RTSX_BITOP(sc, RTSX_CARD_SHARE_MODE, RTSX_CARD_SHARE_MASK, RTSX_CARD_SHARE_48_SD);
if (cmd->data == NULL) {
DELAY(200);
error = rtsx_send_req(sc, cmd);
} else if (cmd->data->len <= 512) {
error = rtsx_xfer_short(sc, cmd);
} else {
error = rtsx_xfer(sc, cmd);
}
end:
if (error == MMC_ERR_NONE) {
callout_reset(&sc->rtsx_timeout_callout, sc->rtsx_timeout * hz, rtsx_timeout, sc);
} else {
rtsx_req_done(sc);
}
RTSX_UNLOCK(sc);
return (error);
}
static int
rtsx_mmcbr_get_ro(device_t bus, device_t child __unused)
{
struct rtsx_softc *sc;
sc = device_get_softc(bus);
if (sc->rtsx_inversion == 0)
return (sc->rtsx_read_only);
else
return !(sc->rtsx_read_only);
}
static int
rtsx_mmcbr_acquire_host(device_t bus, device_t child __unused)
{
struct rtsx_softc *sc;
if (bootverbose)
device_printf(bus, "rtsx_mmcbr_acquire_host()\n");
sc = device_get_softc(bus);
RTSX_LOCK(sc);
while (sc->rtsx_bus_busy)
msleep(&sc->rtsx_bus_busy, &sc->rtsx_mtx, 0, "rtsxah", 0);
sc->rtsx_bus_busy++;
RTSX_UNLOCK(sc);
return (0);
}
static int
rtsx_mmcbr_release_host(device_t bus, device_t child __unused)
{
struct rtsx_softc *sc;
if (bootverbose)
device_printf(bus, "rtsx_mmcbr_release_host()\n");
sc = device_get_softc(bus);
RTSX_LOCK(sc);
sc->rtsx_bus_busy--;
RTSX_UNLOCK(sc);
wakeup(&sc->rtsx_bus_busy);
return (0);
}
/*
*
* PCI Support Functions
*
*/
/*
* Compare the device ID (chip) of this device against the IDs that this driver
* supports. If there is a match, set the description and return success.
*/
static int
rtsx_probe(device_t dev)
{
struct rtsx_softc *sc;
uint16_t vendor_id;
uint16_t device_id;
int i;
int result;
vendor_id = pci_get_vendor(dev);
device_id = pci_get_device(dev);
result = ENXIO;
for (i = 0; rtsx_devices[i].vendor_id != 0; i++) {
if (rtsx_devices[i].vendor_id == vendor_id &&
rtsx_devices[i].device_id == device_id) {
device_set_desc(dev, rtsx_devices[i].desc);
sc = device_get_softc(dev);
sc->rtsx_device_id = device_id;
result = BUS_PROBE_DEFAULT;
break;
}
}
return (result);
}
/*
* Attach function is only called if the probe is successful.
*/
static int
rtsx_attach(device_t dev)
{
struct rtsx_softc *sc = device_get_softc(dev);
struct sysctl_ctx_list *ctx;
struct sysctl_oid_list *tree;
int msi_count = 1;
uint32_t sdio_cfg;
int error;
if (bootverbose)
device_printf(dev, "Attach - Vendor ID: 0x%x - Device ID: 0x%x\n",
pci_get_vendor(dev), pci_get_device(dev));
sc->rtsx_dev = dev;
sc->rtsx_req = NULL;
sc->rtsx_timeout = 10;
sc->rtsx_read_only = 0;
sc->rtsx_force_timing = 0;
sc->rtsx_debug = 0;
sc->rtsx_read_count = 0;
sc->rtsx_write_count = 0;
RTSX_LOCK_INIT(sc);
ctx = device_get_sysctl_ctx(dev);
tree = SYSCTL_CHILDREN(device_get_sysctl_tree(dev));
SYSCTL_ADD_INT(ctx, tree, OID_AUTO, "req_timeout", CTLFLAG_RW,
&sc->rtsx_timeout, 0, "Request timeout in seconds");
SYSCTL_ADD_U8(ctx, tree, OID_AUTO, "read_only", CTLFLAG_RD,
&sc->rtsx_read_only, 0, "Card is write protected");
SYSCTL_ADD_U8(ctx, tree, OID_AUTO, "inversion", CTLFLAG_RWTUN,
&sc->rtsx_inversion, 0, "Inversion of card detection and read only status");
SYSCTL_ADD_U8(ctx, tree, OID_AUTO, "force_timing", CTLFLAG_RW,
&sc->rtsx_force_timing, 0, "Force bus_timing_uhs_sdr50");
SYSCTL_ADD_U8(ctx, tree, OID_AUTO, "debug", CTLFLAG_RW,
&sc->rtsx_debug, 0, "Debugging flag");
SYSCTL_ADD_U64(ctx, tree, OID_AUTO, "read_count", CTLFLAG_RD,
&sc->rtsx_read_count, 0, "Count of read operations");
SYSCTL_ADD_U64(ctx, tree, OID_AUTO, "write_count", CTLFLAG_RD,
&sc->rtsx_write_count, 0, "Count of write operations");
/* Allocate IRQ. */
sc->rtsx_irq_res_id = 0;
if (pci_alloc_msi(dev, &msi_count) == 0)
sc->rtsx_irq_res_id = 1;
sc->rtsx_irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->rtsx_irq_res_id,
RF_ACTIVE | (sc->rtsx_irq_res_id != 0 ? 0 : RF_SHAREABLE));
if (sc->rtsx_irq_res == NULL) {
device_printf(dev, "Can't allocate IRQ resources for %d\n", sc->rtsx_irq_res_id);
pci_release_msi(dev);
return (ENXIO);
}
callout_init_mtx(&sc->rtsx_timeout_callout, &sc->rtsx_mtx, 0);
/* Allocate memory resource. */
if (sc->rtsx_device_id == RTSX_RTS525A)
sc->rtsx_res_id = PCIR_BAR(1);
else
sc->rtsx_res_id = PCIR_BAR(0);
sc->rtsx_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->rtsx_res_id, RF_ACTIVE);
if (sc->rtsx_res == NULL) {
device_printf(dev, "Can't allocate memory resource for %d\n", sc->rtsx_res_id);
goto destroy_rtsx_irq_res;
}
if (bootverbose)
device_printf(dev, "rtsx_irq_res_id: %d, rtsx_res_id: %d\n",
sc->rtsx_irq_res_id, sc->rtsx_res_id);
sc->rtsx_btag = rman_get_bustag(sc->rtsx_res);
sc->rtsx_bhandle = rman_get_bushandle(sc->rtsx_res);
/* Activate the interrupt. */
error = bus_setup_intr(dev, sc->rtsx_irq_res, INTR_TYPE_MISC | INTR_MPSAFE,
NULL, rtsx_intr, sc, &sc->rtsx_irq_cookie);
if (error) {
device_printf(dev, "Can't set up irq [0x%x]!\n", error);
goto destroy_rtsx_res;
}
pci_enable_busmaster(dev);
if (rtsx_read_cfg(sc, 0, RTSX_SDIOCFG_REG, &sdio_cfg) == 0) {
if ((sdio_cfg & RTSX_SDIOCFG_SDIO_ONLY) ||
(sdio_cfg & RTSX_SDIOCFG_HAVE_SDIO))
sc->rtsx_flags |= RTSX_F_SDIO_SUPPORT;
}
/* Allocate two DMA buffers: a command buffer and a data buffer. */
error = rtsx_dma_alloc(sc);
if (error) {
goto destroy_rtsx_irq;
}
/* From dwmmc.c. */
TIMEOUT_TASK_INIT(taskqueue_swi_giant, &sc->rtsx_card_insert_task, 0,
rtsx_card_task, sc);
TASK_INIT(&sc->rtsx_card_remove_task, 0, rtsx_card_task, sc);
#ifdef MMCCAM
sc->rtsx_ccb = NULL;
sc->rtsx_cam_status = 0;
SYSCTL_ADD_U8(ctx, tree, OID_AUTO, "cam_status", CTLFLAG_RD,
&sc->rtsx_cam_status, 0, "driver cam card present");
if ((sc->rtsx_devq = cam_simq_alloc(1)) == NULL) {
device_printf(dev, "Error during CAM queue allocation\n");
goto destroy_rtsx_irq;
}
mtx_init(&sc->rtsx_sim_mtx, "rtsxsim", NULL, MTX_DEF);
sc->rtsx_sim = cam_sim_alloc(rtsx_cam_action, rtsx_cam_poll,
"rtsx", sc, device_get_unit(dev),
&sc->rtsx_sim_mtx, 1, 1, sc->rtsx_devq);
if (sc->rtsx_sim == NULL) {
device_printf(dev, "Can't allocate CAM SIM\n");
goto destroy_rtsx_irq;
}
mtx_lock(&sc->rtsx_sim_mtx);
if (xpt_bus_register(sc->rtsx_sim, dev, 0) != 0) {
device_printf(dev, "Can't register SCSI pass-through bus\n");
mtx_unlock(&sc->rtsx_sim_mtx);
goto destroy_rtsx_irq;
}
mtx_unlock(&sc->rtsx_sim_mtx);
#endif /* MMCCAM */
/* Initialize device. */
if (rtsx_init(sc)) {
device_printf(dev, "Error during rtsx_init()\n");
goto destroy_rtsx_irq;
}
/*
* Schedule a card detection as we won't get an interrupt
* if the card is inserted when we attach
*/
DELAY(500);
if (rtsx_is_card_present(sc))
device_printf(sc->rtsx_dev, "Card present\n");
else
device_printf(sc->rtsx_dev, "Card absent\n");
rtsx_card_task(sc, 0);
if (bootverbose)
device_printf(dev, "Device attached\n");
return (0);
destroy_rtsx_irq:
bus_teardown_intr(dev, sc->rtsx_irq_res, sc->rtsx_irq_cookie);
destroy_rtsx_res:
bus_release_resource(dev, SYS_RES_MEMORY, sc->rtsx_res_id,
sc->rtsx_res);
destroy_rtsx_irq_res:
callout_drain(&sc->rtsx_timeout_callout);
bus_release_resource(dev, SYS_RES_IRQ, sc->rtsx_irq_res_id,
sc->rtsx_irq_res);
pci_release_msi(dev);
RTSX_LOCK_DESTROY(sc);
#ifdef MMCCAM
if (sc->rtsx_sim != NULL) {
mtx_lock(&sc->rtsx_sim_mtx);
xpt_bus_deregister(cam_sim_path(sc->rtsx_sim));
cam_sim_free(sc->rtsx_sim, FALSE);
mtx_unlock(&sc->rtsx_sim_mtx);
}
if (sc->rtsx_devq != NULL) {
mtx_destroy(&sc->rtsx_sim_mtx);
cam_simq_free(sc->rtsx_devq);
}
#endif /* MMCCAM */
return (ENXIO);
}
static int
rtsx_detach(device_t dev)
{
struct rtsx_softc *sc = device_get_softc(dev);
int error;
if (bootverbose)
device_printf(dev, "Detach - Vendor ID: 0x%x - Device ID: 0x%x\n",
pci_get_vendor(dev), pci_get_device(dev));
/* Disable interrupts. */
sc->rtsx_intr_enabled = 0;
WRITE4(sc, RTSX_BIER, sc->rtsx_intr_enabled);
/* Stop device. */
error = device_delete_children(sc->rtsx_dev);
sc->rtsx_mmc_dev = NULL;
if (error)
return (error);
taskqueue_drain_timeout(taskqueue_swi_giant, &sc->rtsx_card_insert_task);
taskqueue_drain(taskqueue_swi_giant, &sc->rtsx_card_remove_task);
/* Teardown the state in our softc created in our attach routine. */
rtsx_dma_free(sc);
if (sc->rtsx_res != NULL)
bus_release_resource(dev, SYS_RES_MEMORY, sc->rtsx_res_id,
sc->rtsx_res);
if (sc->rtsx_irq_cookie != NULL)
bus_teardown_intr(dev, sc->rtsx_irq_res, sc->rtsx_irq_cookie);
if (sc->rtsx_irq_res != NULL) {
callout_drain(&sc->rtsx_timeout_callout);
bus_release_resource(dev, SYS_RES_IRQ, sc->rtsx_irq_res_id,
sc->rtsx_irq_res);
pci_release_msi(dev);
}
RTSX_LOCK_DESTROY(sc);
#ifdef MMCCAM
if (sc->rtsx_sim != NULL) {
mtx_lock(&sc->rtsx_sim_mtx);
xpt_bus_deregister(cam_sim_path(sc->rtsx_sim));
cam_sim_free(sc->rtsx_sim, FALSE);
mtx_unlock(&sc->rtsx_sim_mtx);
}
if (sc->rtsx_devq != NULL) {
mtx_destroy(&sc->rtsx_sim_mtx);
cam_simq_free(sc->rtsx_devq);
}
#endif /* MMCCAM */
return (0);
}
static int
rtsx_shutdown(device_t dev)
{
if (bootverbose)
device_printf(dev, "Shutdown\n");
rtsx_detach(dev);
return (0);
}
/*
* Device suspend routine.
*/
static int
rtsx_suspend(device_t dev)
{
struct rtsx_softc *sc = device_get_softc(dev);
device_printf(dev, "Suspend\n");
#ifdef MMCCAM
if (sc->rtsx_ccb != NULL) {
device_printf(dev, "Request in progress: CMD%u, rtsr_intr_status: 0x%08x\n",
sc->rtsx_ccb->mmcio.cmd.opcode, sc->rtsx_intr_status);
}
#else
if (sc->rtsx_req != NULL) {
device_printf(dev, "Request in progress: CMD%u, rtsr_intr_status: 0x%08x\n",
sc->rtsx_req->cmd->opcode, sc->rtsx_intr_status);
}
#endif /* MMCCAM */
bus_generic_suspend(dev);
return (0);
}
/*
* Device resume routine.
*/
static int
rtsx_resume(device_t dev)
{
device_printf(dev, "Resume\n");
bus_generic_resume(dev);
return (0);
}
static device_method_t rtsx_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, rtsx_probe),
DEVMETHOD(device_attach, rtsx_attach),
DEVMETHOD(device_detach, rtsx_detach),
DEVMETHOD(device_shutdown, rtsx_shutdown),
DEVMETHOD(device_suspend, rtsx_suspend),
DEVMETHOD(device_resume, rtsx_resume),
/* Bus interface */
DEVMETHOD(bus_read_ivar, rtsx_read_ivar),
DEVMETHOD(bus_write_ivar, rtsx_write_ivar),
/* MMC bridge interface */
DEVMETHOD(mmcbr_update_ios, rtsx_mmcbr_update_ios),
DEVMETHOD(mmcbr_switch_vccq, rtsx_mmcbr_switch_vccq),
DEVMETHOD(mmcbr_tune, rtsx_mmcbr_tune),
DEVMETHOD(mmcbr_retune, rtsx_mmcbr_retune),
DEVMETHOD(mmcbr_request, rtsx_mmcbr_request),
DEVMETHOD(mmcbr_get_ro, rtsx_mmcbr_get_ro),
DEVMETHOD(mmcbr_acquire_host, rtsx_mmcbr_acquire_host),
DEVMETHOD(mmcbr_release_host, rtsx_mmcbr_release_host),
DEVMETHOD_END
};
static devclass_t rtsx_devclass;
DEFINE_CLASS_0(rtsx, rtsx_driver, rtsx_methods, sizeof(struct rtsx_softc));
DRIVER_MODULE(rtsx, pci, rtsx_driver, rtsx_devclass, NULL, NULL);
#ifndef MMCCAM
MMC_DECLARE_BRIDGE(rtsx);
#endif /* MMCCAM */