freebsd-dev/sys/dev/mcd/mcdreg.h
Andrey A. Chernov c4ff2eb1dd Newly implemented ioctls list:
DIOCGDINFO, DIOCGPART, DIOCWDINFO, DIOCSDINFO, CDIOCPLAYMSF, CDIOCRESET,
CDIOCEJECT.

CDIOCPLAYBLOCKS removed (old implementation completely wrong and I don't
know how to implement it correctly).

All routines now detects media change correctly.

DELAY_GETREPLAY increased for long time access from first track
to last.

mcd_waitrdy() now use MIN_DELAY=15 as minimal delay which independs
of machine speed.

mcd_doread() now uses real status (old code uses obsoleted soft copy of it).

clear XBSY on error in mcd_doread()

mcd_statrt(): add missing splx(s), cause dead hang with unmatched slpbio()

optimize mcd_doread(), don't set CD mode each time, keep soft copy of mode.

call getdisklabel() _after_ mcdsize() for proper sizes

mcdopen(): old code forget to set MCDREADRAW in flags when open RAW
partition, doread check it for setting RAW CD mode.

Do nothing on stray interrupt (which sometimes occurse, because driver
read data block too slow, DOS driver use 'insb' here). Old stray code
cause timeouts.

Read toc entries code rewritten to return many requested entries
(as supposed) instead of one entry with incorrect structure.

CMDREAD2 requests covered with disable_intr()/enable_intr()
(from DOS driver)

Read junk code added after read block code in doread (from DOS driver)

mcd_read_toc() code fixed to read all needed entries, old code cause
some audio tracks is not played.

mcd_playtracks() code fixed to proper check valid track range.

New binary read modes implemented (from DOS driver).
1994-09-03 16:48:13 +00:00

165 lines
4.8 KiB
C

/*
* Copyright 1993 by Holger Veit (data part)
* Copyright 1993 by Brian Moore (audio part)
* Changes Copyright 1993 by Gary Clark II
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This software was developed by Holger Veit and Brian Moore
* for use with "386BSD" and similar operating systems.
* "Similar operating systems" includes mainly non-profit oriented
* systems for research and education, including but not restricted to
* "NetBSD", "FreeBSD", "Mach" (by CMU).
* 4. Neither the name of the developer(s) nor the name "386BSD"
* may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE DEVELOPER(S) ``AS IS'' AND ANY
* EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE DEVELOPER(S) BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
* OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* This file contains definitions for some cdrom control commands
* and status codes. This info was "inherited" from the DOS MTMCDE.SYS
* driver, and is thus not complete (and may even be wrong). Some day
* the manufacturer or anyone else might provide better documentation,
* so this file (and the driver) will then have a better quality.
*
* $Id: mcdreg.h,v 1.3 1994/02/22 08:44:31 rgrimes Exp $
*/
#ifndef MCD_H
#define MCD_H
#ifdef __GNUC__
#if __GNUC__ >= 2
#pragma pack(1)
#endif
#endif
typedef unsigned char bcd_t;
#define M_msf(msf) msf[0]
#define S_msf(msf) msf[1]
#define F_msf(msf) msf[2]
/* io lines used */
#define MCD_IO_BASE 0x300
#define mcd_command 0
#define mcd_status 0
#define mcd_rdata 0
#define mcd_reset 1
#define mcd_xfer 1
#define mcd_ctl2 2 /* XXX Is this right? */
#define mcd_config 3
#define MCD_MASK_DMA 0x07 /* bits 2-0 = DMA channel */
#define MCD_MASK_IRQ 0x70 /* bits 6-4 = INT number */
/* 001 = int 2,9 */
/* 010 = int 3 */
/* 011 = int 5 */
/* 100 = int 10 */
/* 101 = int 11 */
/* flags */
#define STATUS_AVAIL 0xB
#define DATA_AVAIL 0xF
/* New Flags */
#define M_STATUS_AVAIL 0xFB
#define M_DATA_AVAIL 0xFD
/* New Commands */
#define M_RESET 0x00
#define M_PICKLE 0x04
/* ports */
#define MCD_DATA 0
#define MCD_FLAGS 1
#define MCD_CTRL 2
#define CHANNEL 3 /* XXX ??? */
/* Status bits */
#define MCD_ST_DOOROPEN 0x80
#define MCD_ST_DSKIN 0x40
#define MCD_ST_DSKCHNG 0x20
#define MCD_ST_BUSY 0x04
#define MCD_ST_AUDIOBSY 0x02
/* commands known by the controller */
#define MCD_CMDRESET 0x00
#define MCD_CMDGETVOLINFO 0x10 /* gets mcd_volinfo */
#define MCD_CMDGETQCHN 0x20 /* gets mcd_qchninfo */
#define MCD_CMDGETSTAT 0x40 /* gets a byte of status */
#define MCD_CMDSETMODE 0x50 /* set transmission mode, needs byte */
#define MCD_MD_RAW 0x60
#define MCD_MD_BIN_RAW 0x61
#define MCD_MD_COOKED 0x01
#define MCD_MD_BIN_COOKED 0x81
#define MCD_MD_TOC 0x05
#define MCD_CMDSTOPAUDIO 0x70
#define MCD_CMDGETVOLUME 0x8E /* gets mcd_volume */
#define MCD_CMDSETVOLUME 0xAE /* sets mcd_volume */
#define MCD_CMDREAD1 0xB0 /* read n sectors */
#define MCD_CMDREAD2 0xC0 /* read from-to */
#define MCD_CMDCONTINFO 0xDC /* Get controller info */
#define MCD_CMDEJECTDISK 0xF6
#define MCD_CMDCLOSETRAY 0xF8
#define MCD_CMDLOCKDRV 0xFE /* needs byte */
#define MCD_LK_UNLOCK 0x00
#define MCD_LK_LOCK 0x01
#define MCD_LK_TEST 0x02
struct mcd_volinfo {
bcd_t trk_low;
bcd_t trk_high;
bcd_t vol_msf[3];
bcd_t trk1_msf[3];
};
struct mcd_qchninfo {
u_char ctrl_adr;
u_char trk_no;
u_char idx_no;
bcd_t trk_size_msf[3];
u_char :8;
bcd_t hd_pos_msf[3];
};
struct mcd_volume {
u_char v0l;
u_char v0rs;
u_char v0r;
u_char v0ls;
};
struct mcd_read1 {
bcd_t start_msf[3];
u_char nsec[3];
};
struct mcd_read2 {
bcd_t start_msf[3];
bcd_t end_msf[3];
};
#endif /* MCD_H */