7d379626b1
v1.1.4 2015-06-09 * Fix a bug that FailLED was not initialized properly. v1.1.3 2015-05-19 * Support Report Luns command. v1.1.2 2015-05-05 * Fix a bug that report wrong physical sector size for 512e HDD. Many thanks to HighPoint for continued support of FreeBSD! This driver update is intended for 10.2-RELEASE. Submitted by: Steve Chang MFC after: 3 days
224 lines
7.5 KiB
Plaintext
224 lines
7.5 KiB
Plaintext
Rocket Controller Driver for FreeBSD
|
|
Copyright (C) 2015 HighPoint Technologies, Inc. All rights reserved.
|
|
|
|
#############################################################################
|
|
Revision History:
|
|
|
|
v1.1.4 2015-06-09
|
|
* Fix a bug that FailLED was not initialized properly.
|
|
|
|
v1.1.3 2015-05-19
|
|
* Support Report Luns command.
|
|
|
|
v1.1.2 2015-05-05
|
|
* Fix a bug that report wrong physical sector size for 512e HDD.
|
|
|
|
v1.1.1 2015-03-26
|
|
* Support 4Kn drive.
|
|
* Change the SCSI target ID of the disk to be the index of physical connetion to the HBA.
|
|
* Support staggered drive spin up.
|
|
* Fix a bug that command would be timeout because of improper interrupt service routine.
|
|
* Error handling to avoid scsi command lost which caused system hang up.
|
|
* Fix a bug that fail to get the devcie's serial number via FreeNAS WebGUI.
|
|
|
|
v1.0.1 2014-8-19
|
|
* Do not retry the command and reset the disk when failed to enable or
|
|
disable spin up feature.
|
|
* Fix up a bug that disk failed to probe if driver failed to access the
|
|
10th LBA.
|
|
* Fix a bug that request timeout but it has been completed in certain
|
|
cases.
|
|
* Support smartmontool for R750.
|
|
|
|
v1.0 2013-7-3
|
|
First source code release
|
|
|
|
#############################################################################
|
|
|
|
1. Overview
|
|
---------------------
|
|
This package contains FreeBSD driver source code for HighPoint Rocket
|
|
controller, include:
|
|
SATA Controller: R750, DC7280.
|
|
|
|
NO WARRANTY
|
|
|
|
THE DRIVER SOURCE CODE HIGHPOINT PROVIDED IS FREE OF CHARGE, AND THERE IS
|
|
NO WARRANTY FOR THE PROGRAM. THERE ARE NO RESTRICTIONS ON THE USE OF THIS
|
|
FREE SOURCE CODE. HIGHPOINT DOES NOT PROVIDE ANY TECHNICAL SUPPORT IF THE
|
|
CODE HAS BEEN CHANGED FROM ORIGINAL SOURCE CODE.
|
|
|
|
LIMITATION OF LIABILITY
|
|
|
|
IN NO EVENT WILL HIGHPOINT BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
|
|
INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OF OR
|
|
INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, HIGHPOINT SHALL NOT HAVE
|
|
LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED USED WITH THE
|
|
PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, OR RECOVERING
|
|
SUCH HARDWARE, OR DATA.
|
|
|
|
|
|
2. Rebuild the kernel with HighPoint Rocket support
|
|
-----------------------------------------------
|
|
|
|
1) Install kernel source package and building tools.
|
|
|
|
2) Extract the driver files under the kernel source tree:
|
|
|
|
# cd /usr/src/sys/
|
|
# tar xvzf /your/path/to/HPTNR_FreeBSD_Src_1.x.x_xx_xx_xx.tgz
|
|
|
|
3) Update the kernel configuration file to include the HighPoint source.
|
|
Assume the configure file is GENERIC, and new kernel configure file is
|
|
MYKERNEL:
|
|
|
|
# cd i386/conf (or amd64/conf for AMD64)
|
|
# cp GENERIC MYKERNEL
|
|
|
|
4) Edit MYKERNEL, and add the following line under "RAID controllers
|
|
interfaced to the SCSI subsystem":
|
|
|
|
device "hptnr" #HighPoint Rocket
|
|
|
|
5) For i386 system, edit /usr/src/sys/conf/files.i386 and append the lines
|
|
shown below:
|
|
|
|
hptnr_lib.o optional hptnr \
|
|
dependency "$S/dev/hptnr/i386-elf.hptnr_lib.o.uu" \
|
|
compile-with "uudecode < $S/dev/hptnr/i386-elf.hptnr_lib.o.uu" \
|
|
no-implicit-rule
|
|
|
|
dev/hptnr/hptnr_os_bsd.c optional hptnr
|
|
dev/hptnr/hptnr_osm_bsd.c optional hptnr
|
|
dev/hptnr/hptnr_config.c optional hptnr
|
|
|
|
For amd64 system, edit /usr/src/sys/conf/files.amd64 and append the lines
|
|
shown below:
|
|
|
|
hptnr_lib.o optional hptnr \
|
|
dependency "$S/dev/hptnr/amd64-elf.hptnr_lib.o.uu" \
|
|
compile-with "uudecode < $S/dev/hptnr/amd64-elf.hptnr_lib.o.uu" \
|
|
no-implicit-rule
|
|
|
|
dev/hptnr/hptnr_os_bsd.c optional hptnr
|
|
dev/hptnr/hptnr_osm_bsd.c optional hptnr
|
|
dev/hptnr/hptnr_config.c optional hptnr
|
|
|
|
6) Rebuild and install the kernel:
|
|
|
|
a) for FreeBSD 5.x-i386/6.x-i386/7.x-i386/8.x-i386/9.x-i386/10.x-i386:
|
|
|
|
# cd /usr/src/sys/i386/conf/
|
|
# /usr/sbin/config MYKERNEL
|
|
# cd ../compile/MYKERNEL/
|
|
# make depend
|
|
# make
|
|
# make install
|
|
|
|
b) for FreeBSD 5.x-amd64/6.x-amd64/7.x-amd64/8.x-amd64/9.x-amd64/10.x-amd64:
|
|
|
|
# cd /usr/src/sys/amd64/conf/
|
|
# /usr/sbin/config MYKERNEL
|
|
# cd ../compile/MYKERNEL/
|
|
# make depend
|
|
# make
|
|
# make install
|
|
|
|
c) for FreeBSD 4.x:
|
|
|
|
# cd /usr/src/sys/i386/conf/
|
|
# /usr/sbin/config MYKERNEL
|
|
# cd ../../compile/MYKERNEL/
|
|
# make depend
|
|
# make
|
|
# make install
|
|
|
|
If the driver was previously configured as an auto-loaded module by
|
|
/boot/defaults/loader.conf, please remove the entry hptnr_load="YES"
|
|
from loader.conf to prevent the driver from being loaded twice.
|
|
|
|
7) Reboot from the new kernel.
|
|
|
|
|
|
3. Build/Load the driver as a kernel module
|
|
------------------------------------------------
|
|
|
|
1) Install kernel source package and building tools.
|
|
|
|
2) Extract the driver files under the kernel source tree:
|
|
|
|
# cd /usr/src/sys/
|
|
# tar xvzf /your/path/to/HPTNR_FreeBSD_Src_1.x.x_xx_xx_xx.tgz
|
|
|
|
|
|
4) Build the driver module:
|
|
|
|
# cd modules/hptnr
|
|
# make
|
|
|
|
5) Copy the driver module to the kernel module directory
|
|
|
|
For FreeBSD 4.x:
|
|
|
|
# cp hptnr.ko /modules/
|
|
|
|
For FreeBSD 5.x/6.x/7.x/8.x/9.x/10.x:
|
|
|
|
# cp hptnr.ko /boot/kernel/
|
|
|
|
6) Reboot and load the driver under loader prompt. e.g:
|
|
|
|
BTX loader 1.00 BTX version is 1.01
|
|
Console: internal video/keyboard
|
|
BIOS driver A: is disk0
|
|
BIOS driver C: is disk2
|
|
BIOS 636kB/74512kB available memory
|
|
|
|
FreeBSD/i386 bootstrap loader, Revision 0.8
|
|
(mailto:jkh@narf.osd.bsdi.com, Sat Apr 21 08:46:19 GMT 2001)
|
|
Loading /boot/defaults/loader.conf
|
|
/kernel text=0x24f1db data=0x3007ec+0x2062c -
|
|
|
|
Hit [Enter] to boot immediagely, or any other key for command prompt.
|
|
Booting [kernel] in 9 seconds
|
|
|
|
<-- press SPACE key here
|
|
Type '?' for a list of commands, 'help' for more detailed help.
|
|
ok load hptnr
|
|
/modules/hptnr.ko text=0xf571 data=0x2c8+0x254
|
|
ok boot
|
|
|
|
For FreeBSD 5.x/6.x/7.x/8.x/9.x/10.x, you can select 6 on the boot menu to get a loader
|
|
prompt.
|
|
|
|
7) You can add a below line into /boot/defaults/loader.conf to load the
|
|
driver automatically:
|
|
|
|
hptnr_load="YES"
|
|
|
|
Please refer to the installation guide in HighPoint FreeBSD driver release
|
|
package for more information.
|
|
|
|
|
|
#############################################################################
|
|
Technical support and service
|
|
|
|
If you have questions about installing or using your HighPoint product,
|
|
check the user's guide or readme file first, and you will find answers to
|
|
most of your questions here. If you need further assistance, please
|
|
contact us. We offer the following support and information services:
|
|
|
|
1) The HighPoint Web Site provides information on software upgrades,
|
|
answers to common questions, and other topics. The Web Site is
|
|
available from Internet 24 hours a day, 7 days a week, at
|
|
http://www.highpoint-tech.com.
|
|
|
|
2) For technical support, send e-mail to support@highpoint-tech.com
|
|
|
|
NOTE: Before you send an e-mail, please visit our Web Site
|
|
(http://www.highpoint-tech.com) to check if there is a new or
|
|
updated device driver for your system.
|
|
|
|
$FreeBSD$
|