freebsd-dev/share/examples/drivers/make_device_driver.sh
2002-08-02 10:37:22 +00:00

987 lines
26 KiB
Bash
Executable File

#!/bin/sh
# This writes a skeleton driver and puts it into the kernel tree for you.
# It also adds FOO and files.FOO configuration files so you can compile
# a kernel with your FOO driver linked in.
# To do so:
# cd /usr/src; make buildkernel KERNCONF=FOO
#
# More interestingly, it creates a modules/foo directory
# which it populates, to allow you to compile a FOO module
# which can be linked with your presently running kernel (if you feel brave).
# To do so:
# cd /sys/modules/foo; make depend; make; make install; kldload foo
#
# arg1 to this script is expected to be lowercase "foo"
#
# Trust me, RUN THIS SCRIPT :)
#
# TODO:
# o generate foo_isa.c, foo_pci.c, foo_pccard.c, foo_cardbus.c, and foovar.h
# o Put pccard stuff in here.
#
# $FreeBSD$"
#
#
if [ "X${1}" = "X" ]
then
echo "Hey , how about some help here.. give me a device name!"
exit 1
fi
UPPER=`echo ${1} |tr "[:lower:]" "[:upper:]"`
HERE=`pwd`
cd /sys
TOP=`pwd`
RCS_KEYWORD=FreeBSD
if [ -d ${TOP}/modules/${1} ]
then
echo "There appears to already be a module called ${1}"
echo -n "Should it be overwritten? [Y]"
read VAL
if [ "-z" "$VAL" ]
then
VAL=YES
fi
case ${VAL} in
[yY]*)
echo "Cleaning up from prior runs"
rm -rf ${TOP}/dev/${1}
rm -rf ${TOP}/modules/${1}
rm ${TOP}/i386/conf/files.${UPPER}
rm ${TOP}/i386/conf/${UPPER}
rm ${TOP}/sys/${1}io.h
;;
*)
exit 1
;;
esac
fi
echo "The following files will be created:"
echo ${TOP}/modules/${1}
echo ${TOP}/i386/conf/files.${UPPER}
echo ${TOP}/i386/conf/${UPPER}
echo ${TOP}/dev/${1}
echo ${TOP}/dev/${1}/${1}.c
echo ${TOP}/sys/${1}io.h
echo ${TOP}/modules/${1}
echo ${TOP}/modules/${1}/Makefile
mkdir ${TOP}/modules/${1}
#######################################################################
#######################################################################
#
# Create configuration information needed to create a kernel
# containing this driver.
#
# Not really needed if we are going to do this as a module.
#######################################################################
# First add the file to a local file list.
#######################################################################
cat >${TOP}/i386/conf/files.${UPPER} <<DONE
dev/${1}/${1}.c optional ${1}
DONE
#######################################################################
# Then create a configuration file for a kernel that contains this driver.
#######################################################################
cat >${TOP}/i386/conf/${UPPER} <<DONE
# Configuration file for kernel type: ${UPPER}
ident ${UPPER}
# \$${RCS_KEYWORD}$
DONE
grep -v GENERIC < /sys/i386/conf/GENERIC >>${TOP}/i386/conf/${UPPER}
cat >>${TOP}/i386/conf/${UPPER} <<DONE
options DDB # trust me, you'll need this
device ${1}
DONE
if [ ! -d ${TOP}/dev/${1} ]
then
mkdir -p ${TOP}/dev/${1}
fi
cat >${TOP}/dev/${1}/${1}.c <<DONE
/*
* Copyright (c) [year] [your name]
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* http://www.daemonnews.org/200008/isa.html is required reading.
* hopefully it will make it's way into the handbook.
*/
#include <sys/cdefs.h>
__FBSDID("\$${RCS_KEYWORD}$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/conf.h> /* cdevsw stuff */
#include <sys/kernel.h> /* SYSINIT stuff */
#include <sys/uio.h> /* SYSINIT stuff */
#include <sys/malloc.h> /* malloc region definitions */
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/proc.h>
#include <sys/rman.h>
#include <sys/time.h>
#include <sys/${1}io.h> /* ${1} IOCTL definitions */
#include <machine/bus.h>
#include <machine/resource.h>
#include <machine/bus_pio.h>
#include <machine/bus_memio.h>
#include <pci/pcireg.h>
#include <pci/pcivar.h>
#include <isa/isavar.h>
#include "isa_if.h"
/* XXX These should be defined in terms of bus-space ops */
#define ${UPPER}_INB(port) inb(port_start)
#define ${UPPER}_OUTB(port, val) ( port_start, (val))
#define SOME_PORT 123
#define EXPECTED_VALUE 0x42
/*
* The softc is automatically allocated by the parent bus using the
* size specified in the driver_t declaration below
*/
#define DEV2SOFTC(dev) ((struct ${1}_softc *) (dev)->si_drv1)
#define DEVICE2SOFTC(dev) ((struct ${1}_softc *) device_get_softc(dev))
/*
* device specific Misc defines
*/
#define BUFFERSIZE 1024
#define NUMPORTS 4
#define MEMSIZE (4 * 1024) /* imaginable h/w buffer size */
/*
* One of these per allocated device
*/
struct ${1}_softc {
bus_space_tag_t bt;
bus_space_handle_t bh;
int rid_ioport;
int rid_memory;
int rid_irq;
int rid_drq;
struct resource* res_ioport; /* resource for port range */
struct resource* res_memory; /* resource for mem range */
struct resource* res_irq; /* resource for irq range */
struct resource* res_drq; /* resource for dma channel */
device_t device;
dev_t dev;
void *intr_cookie;
void *vaddr; /* Virtual address of mem resource */
char buffer[BUFFERSIZE]; /* if we needed to buffer something */
};
/* Function prototypes (these should all be static) */
static int ${1}_deallocate_resources(device_t device);
static int ${1}_allocate_resources(device_t device);
static int ${1}_attach(device_t device, struct ${1}_softc *scp);
static int ${1}_detach(device_t device, struct ${1}_softc *scp);
static d_open_t ${1}open;
static d_close_t ${1}close;
static d_read_t ${1}read;
static d_write_t ${1}write;
static d_ioctl_t ${1}ioctl;
static d_mmap_t ${1}mmap;
static d_poll_t ${1}poll;
static void ${1}intr(void *arg);
#define CDEV_MAJOR 20
static struct cdevsw ${1}_cdevsw = {
/* open */ ${1}open,
/* close */ ${1}close,
/* read */ ${1}read,
/* write */ ${1}write,
/* ioctl */ ${1}ioctl,
/* poll */ ${1}poll,
/* mmap */ ${1}mmap,
/* strategy */ nostrategy, /* not a block type device */
/* name */ "${1}",
/* maj */ CDEV_MAJOR,
/* dump */ nodump, /* not a block type device */
/* psize */ nopsize, /* not a block type device */
/* flags */ 0,
/* bmaj */ -1
};
static devclass_t ${1}_devclass;
/*
*****************************************
* ISA Attachment structures and functions
*****************************************
*/
static void ${1}_isa_identify (driver_t *, device_t);
static int ${1}_isa_probe (device_t);
static int ${1}_isa_attach (device_t);
static int ${1}_isa_detach (device_t);
static struct isa_pnp_id ${1}_ids[] = {
{0x12345678, "ABCco Widget"},
{0xfedcba98, "shining moon Widget ripoff"},
{0, NULL}
};
static device_method_t ${1}_methods[] = {
DEVMETHOD(device_identify, ${1}_isa_identify),
DEVMETHOD(device_probe, ${1}_isa_probe),
DEVMETHOD(device_attach, ${1}_isa_attach),
DEVMETHOD(device_detach, ${1}_isa_detach),
{ 0, 0 }
};
static driver_t ${1}_isa_driver = {
"${1}",
${1}_methods,
sizeof (struct ${1}_softc)
};
DRIVER_MODULE(${1}, isa, ${1}_isa_driver, ${1}_devclass, 0, 0);
/*
* Here list some port addresses we might expect our widget to appear at:
* This list should only be used for cards that have some non-destructive
* (to other cards) way of probing these address. Otherwise the driver
* should not go looking for instances of itself, but instead rely on
* the hints file. Strange failures for people with other cards might
* result.
*/
static struct localhints {
int ioport;
int irq;
int drq;
int mem;
} res[] = {
{ 0x210, 11, 2, 0xcd000},
{ 0x310, 12, 3, 0xdd000},
{ 0x320, 9, 6, 0xd4000},
{0,0,0,0}
};
#define MAXHINTS 10 /* just an arbitrary safety limit */
/*
* Called once when the driver is somehow connected with the bus,
* (Either linked in and the bus is started, or loaded as a module).
*
* The aim of this routine in an ISA driver is to add child entries to
* the parent bus so that it looks as if the devices were detected by
* some pnp-like method, or at least mentioned in the hints.
*
* For NON-PNP "dumb" devices:
* Add entries into the bus's list of likely devices, so that
* our 'probe routine' will be called for them.
* This is similar to what the 'hints' code achieves, except this is
* loadable with the driver.
* In the 'dumb' case we end up with more children than needed but
* some (or all) of them will fail probe() and only waste a little memory.
*
* For NON-PNP "Smart" devices:
* If the device has a NON-PNP way of being detected and setting/sensing
* the card, then do that here and add a child for each set of
* hardware found.
*
* For PNP devices:
* If the device is always PNP capable then this function can be removed.
* The ISA PNP system will have automatically added it to the system and
* so your identify routine needn't do anything.
*
* If the device is mentioned in the 'hints' file then this
* function can be removed. All devices mentioned in the hints
* file get added as children for probing, whether or not the
* driver is linked in. So even as a module it MAY still be there.
* See isa/isahint.c for hints being added in.
*/
static void
${1}_isa_identify (driver_t *driver, device_t parent)
{
u_int32_t irq=0;
u_int32_t ioport;
device_t child;
int i;
/*
* If we've already got ${UPPER} attached somehow, don't try again.
* Maybe it was in the hints file. or it was loaded before.
*/
if (device_find_child(parent, "${1}", 0)) {
printf("${UPPER}: already attached\n");
return;
}
/* XXX look at dev/acpica/acpi_isa.c for use of ISA_ADD_CONFIG() macro */
/* XXX What is ISA_SET_CONFIG_CALLBACK(parent, child, pnpbios_set_config, 0) ?*/
for (i = 0; i < MAXHINTS; i++) {
ioport = res[i].ioport;
irq = res[i].irq;
if ((ioport == 0) && (irq == 0))
return; /* we've added all our local hints */
child = BUS_ADD_CHILD(parent, ISA_ORDER_SPECULATIVE, "${1}", -1);
bus_set_resource(child, SYS_RES_IOPORT, 0, ioport, NUMPORTS);
bus_set_resource(child, SYS_RES_IRQ, 0, irq, 1);
bus_set_resource(child, SYS_RES_DRQ, 0, res[i].drq, 1);
bus_set_resource(child, SYS_RES_MEMORY, 0, res[i].mem, MEMSIZE);
#if 0
/*
* If we wanted to pretend PNP found it
* we could do this, and put matching entries
* in the PNP table, but I think it's probably too hacky.
* As you see, some people have done it though.
* Basically EISA (remember that?) would do this I think
*/
isa_set_vendorid(child, PNP_EISAID("ESS1888"));
isa_set_logicalid(child, PNP_EISAID("ESS1888"));
#endif
}
#if 0
/*
* Do some smart probing (e.g. like the lnc driver)
* and add a child for each one found.
*/
#endif
return;
}
/*
* The ISA code calls this for each device it knows about,
* whether via the PNP code or via the hints etc.
* If the device nas no PNP capabilities, remove all the
* PNP entries, but keep the call to ISA_PNP_PROBE()
* As it will guard against accidentally recognising
* foreign hardware. This is because we will be called to check against
* ALL PNP hardware.
*/
static int
${1}_isa_probe (device_t device)
{
int error;
device_t parent = device_get_parent(device);
struct ${1}_softc *scp = DEVICE2SOFTC(device);
u_long port_start, port_count;
bzero(scp, sizeof(*scp));
scp->device = device;
/*
* Check this device for a PNP match in our table..
* There are several possible outcomes.
* error == 0 We match a PNP ).
* error == ENXIO, It is a PNP device but not in our table.
* error == ENOENT, It is not a PNP device.. try heuristic probes.
* -- logic from if_ed_isa.c, added info from isa/isa_if.m:
*
* If we had a list of devices that we could handle really well,
* and a list which we could handle only basic functions, then
* we would call this twice, once for each list,
* and return a value of '-2' or something if we could
* only handle basic functions. This would allow a specific
* Widgetplus driver to make a better offer if it knows how to
* do all the extended functions. (see non-pnp part for more info)
*/
error = ISA_PNP_PROBE(parent, device, ${1}_ids);
switch (error) {
case 0:
/*
* We found a PNP device.
* Do nothing, as it's all done in attach()
*/
break;
case ENOENT:
/*
* Well it didn't show up in the PNP tables
* so look directly at known ports (if we have any)
* in case we are looking for an old pre-PNP card.
*
* Hopefully the 'identify' routine will have picked these
* up for us first if they use some proprietary detection
* method.
*
* The ports, irqs etc should come from a 'hints' section
* which is read in by code in isa/isahint.c
* and kern/subr_bus.c to create resource entries,
* or have been added by the 'identify routine above.
* Note that HINTS based resource requests have NO
* SIZE for the memory or ports requests (just a base)
* so we may need to 'correct' this before we
* do any probing.
*/
/*
* find out the values of any resources we
* need for our dumb probe. Also check we have enough ports
* in the request. (could be hints based).
* Should probably do the same for memory regions too.
*/
error = bus_get_resource(device, SYS_RES_IOPORT, 0,
&port_start, &port_count);
if (port_count != NUMPORTS) {
bus_set_resource(device, SYS_RES_IOPORT, 0,
port_start, NUMPORTS);
}
/*
* Make a temporary resource reservation.
* If we can't get the resources we need then
* we need to abort. Possibly this indicates
* the resources were used by another device
* in which case the probe would have failed anyhow.
*/
if ((error = (${1}_allocate_resources(device)))) {
error = ENXIO;
goto errexit;
}
/* dummy heuristic type probe */
if (inb(port_start) != EXPECTED_VALUE) {
/*
* It isn't what we hoped, so quit looking for it.
*/
error = ENXIO;
} else {
u_long membase = bus_get_resource_start(device,
SYS_RES_MEMORY, 0 /*rid*/);
u_long memsize;
/*
* If we discover in some way that the device has
* XXX bytes of memory window, we can override
* or set the memory size in the child resource list.
*/
memsize = inb(port_start + 1) * 1024; /* for example */
error = bus_set_resource(device, SYS_RES_MEMORY,
/*rid*/0, membase, memsize);
/*
* We found one, return non-positive numbers..
* Return -N if we cant handle it, but not well.
* Return -2 if we would LIKE the device
* Return -1 if we want it a lot
* Return 0 if we MUST get the device
* This allows drivers to 'bid' for a device.
*/
device_set_desc(device, "ACME Widget model 1234");
error = -1; /* we want it but someone else
may be even better */
}
/*
* Unreserve the resources for now because
* another driver may bid for device too.
* If we lose the bid, but still hold the resources, we will
* effectively have disabled the other driver from getting them
* which will result in neither driver getting the device.
* We will ask for them again in attach if we win.
*/
${1}_deallocate_resources(device);
break;
case ENXIO:
/* It was PNP but not ours, leave immediately */
default:
error = ENXIO;
}
errexit:
return (error);
}
/*
* Called if the probe succeeded and our bid won the device.
* We can be destructive here as we know we have the device.
* This is the first place we can be sure we have a softc structure.
* You would do ISA specific attach things here, but generically there aren't
* any (yey new-bus!).
*/
static int
${1}_isa_attach (device_t device)
{
int error;
struct ${1}_softc *scp = DEVICE2SOFTC(device);
error = ${1}_attach(device, scp);
if (error)
${1}_isa_detach(device);
return (error);
}
/*
* detach the driver (e.g. module unload)
* call the bus independent version
* and undo anything we did in the ISA attach routine.
*/
static int
${1}_isa_detach (device_t device)
{
int error;
struct ${1}_softc *scp = DEVICE2SOFTC(device);
error = ${1}_detach(device, scp);
return (error);
}
/*
***************************************
* PCI Attachment structures and code
***************************************
*/
static int ${1}_pci_probe(device_t);
static int ${1}_pci_attach(device_t);
static int ${1}_pci_detach(device_t);
static device_method_t ${1}_pci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ${1}_pci_probe),
DEVMETHOD(device_attach, ${1}_pci_attach),
DEVMETHOD(device_detach, ${1}_pci_detach),
{ 0, 0 }
};
static driver_t ${1}_pci_driver = {
"${1}",
${1}_pci_methods,
sizeof(struct ${1}_softc),
};
DRIVER_MODULE(${1}, pci, ${1}_pci_driver, ${1}_devclass, 0, 0);
/*
* Cardbus is a pci bus plus extra, so use the pci driver unless special
* things need to be done only in the cardbus case.
*/
DRIVER_MODULE(${1}, cardbus, ${1}_pci_driver, ${1}_devclass, 0, 0);
static struct _pcsid
{
u_int32_t type;
const char *desc;
} pci_ids[] = {
{ 0x1234abcd, "ACME PCI Widgetplus" },
{ 0x1243fedc, "Happy moon brand RIPOFFplus" },
{ 0x00000000, NULL }
};
/*
* See if this card is specifically mentioned in our list of known devices.
* Theoretically we might also put in a weak bid for some devices that
* report themselves to be some generic type of device if we can handle
* that generic type. (other PCI_XXX calls give that info).
* This would allow a specific driver to over-ride us.
*
* See the comments in the ISA section regarding returning non-positive
* values from probe routines.
*/
static int
${1}_pci_probe (device_t device)
{
u_int32_t type = pci_get_devid(device);
struct _pcsid *ep =pci_ids;
while (ep->type && ep->type != type)
++ep;
if (ep->desc) {
device_set_desc(device, ep->desc);
return 0; /* If there might be a better driver, return -2 */
} else
return ENXIO;
}
static int
${1}_pci_attach(device_t device)
{
int error;
struct ${1}_softc *scp = DEVICE2SOFTC(device);
error = ${1}_attach(device, scp);
if (error)
${1}_pci_detach(device);
return (error);
}
static int
${1}_pci_detach (device_t device)
{
int error;
struct ${1}_softc *scp = DEVICE2SOFTC(device);
error = ${1}_detach(device, scp);
return (error);
}
/*
****************************************
* Common Attachment sub-functions
****************************************
*/
static int
${1}_attach(device_t device, struct ${1}_softc * scp)
{
device_t parent = device_get_parent(device);
int unit = device_get_unit(device);
scp->dev = make_dev(&${1}_cdevsw, 0,
UID_ROOT, GID_OPERATOR, 0600, "${1}%d", unit);
scp->dev->si_drv1 = scp;
if (${1}_allocate_resources(device))
goto errexit;
scp->bt = rman_get_bustag(scp->res_ioport);
scp->bh = rman_get_bushandle(scp->res_ioport);
/* register the interrupt handler */
/*
* The type should be one of:
* INTR_TYPE_TTY
* INTR_TYPE_BIO
* INTR_TYPE_CAM
* INTR_TYPE_NET
* INTR_TYPE_MISC
* This will probably change with SMPng. INTR_TYPE_FAST may be
* OR'd into this type to mark the interrupt fast. However, fast
* interrupts cannot be shared at all so special precautions are
* necessary when coding fast interrupt routines.
*/
if (scp->res_irq) {
/* default to the tty mask for registration */ /* XXX */
if (BUS_SETUP_INTR(parent, device, scp->res_irq, INTR_TYPE_TTY,
${1}intr, scp, &scp->intr_cookie) == 0) {
/* do something if successful */
} else
goto errexit;
}
/*
* If we want to access the memory we will need
* to know where it was mapped.
*
* Use of this function is discouraged, however. You should
* be accessing the device with the bus_space API if at all
* possible.
*/
scp->vaddr = rman_get_virtual(scp->res_memory);
return 0;
errexit:
/*
* Undo anything we may have done
*/
${1}_detach(device, scp);
return (ENXIO);
}
static int
${1}_detach(device_t device, struct ${1}_softc *scp)
{
device_t parent = device_get_parent(device);
/*
* At this point stick a strong piece of wood into the device
* to make sure it is stopped safely. The alternative is to
* simply REFUSE to detach if it's busy. What you do depends on
* your specific situation.
*
* Sometimes the parent bus will detach you anyway, even if you
* are busy. You must cope with that possibility. Your hardware
* might even already be gone in the case of cardbus or pccard
* devices.
*/
/* ZAP some register */
/*
* Take our interrupt handler out of the list of handlers
* that can handle this irq.
*/
if (scp->intr_cookie != NULL) {
if (BUS_TEARDOWN_INTR(parent, device,
scp->res_irq, scp->intr_cookie) != 0)
printf("intr teardown failed.. continuing\n");
scp->intr_cookie = NULL;
}
/*
* deallocate any system resources we may have
* allocated on behalf of this driver.
*/
scp->vaddr = NULL;
return ${1}_deallocate_resources(device);
}
static int
${1}_allocate_resources(device_t device)
{
int error;
struct ${1}_softc *scp = DEVICE2SOFTC(device);
int size = 16; /* SIZE of port range used */
scp->res_ioport = bus_alloc_resource(device, SYS_RES_IOPORT,
&scp->rid_ioport, 0ul, ~0ul, size, RF_ACTIVE);
if (scp->res_ioport == NULL)
goto errexit;
scp->res_irq = bus_alloc_resource(device, SYS_RES_IRQ,
&scp->rid_irq, 0ul, ~0ul, 1, RF_SHAREABLE|RF_ACTIVE);
if (scp->res_irq == NULL)
goto errexit;
scp->res_drq = bus_alloc_resource(device, SYS_RES_DRQ,
&scp->rid_drq, 0ul, ~0ul, 1, RF_ACTIVE);
if (scp->res_drq == NULL)
goto errexit;
scp->res_memory = bus_alloc_resource(device, SYS_RES_MEMORY,
&scp->rid_memory, 0ul, ~0ul, MSIZE, RF_ACTIVE);
if (scp->res_memory == NULL)
goto errexit;
return (0);
errexit:
error = ENXIO;
/* cleanup anything we may have assigned. */
${1}_deallocate_resources(device);
return (ENXIO); /* for want of a better idea */
}
static int
${1}_deallocate_resources(device_t device)
{
struct ${1}_softc *scp = DEVICE2SOFTC(device);
if (scp->res_irq != 0) {
bus_deactivate_resource(device, SYS_RES_IRQ,
scp->rid_irq, scp->res_irq);
bus_release_resource(device, SYS_RES_IRQ,
scp->rid_irq, scp->res_irq);
scp->res_irq = 0;
}
if (scp->res_ioport != 0) {
bus_deactivate_resource(device, SYS_RES_IOPORT,
scp->rid_ioport, scp->res_ioport);
bus_release_resource(device, SYS_RES_IOPORT,
scp->rid_ioport, scp->res_ioport);
scp->res_ioport = 0;
}
if (scp->res_memory != 0) {
bus_deactivate_resource(device, SYS_RES_MEMORY,
scp->rid_memory, scp->res_memory);
bus_release_resource(device, SYS_RES_MEMORY,
scp->rid_memory, scp->res_memory);
scp->res_memory = 0;
}
if (scp->res_drq != 0) {
bus_deactivate_resource(device, SYS_RES_DRQ,
scp->rid_drq, scp->res_drq);
bus_release_resource(device, SYS_RES_DRQ,
scp->rid_drq, scp->res_drq);
scp->res_drq = 0;
}
if (scp->dev)
destroy_dev(scp->dev);
return (0);
}
static void
${1}intr(void *arg)
{
struct ${1}_softc *scp = (struct ${1}_softc *) arg;
/*
* well we got an interrupt, now what?
*
* Make sure that the interrupt routine will always terminate,
* even in the face of "bogus" data from the card.
*/
return;
}
static int
${1}ioctl (dev_t dev, u_long cmd, caddr_t data, int flag, struct thread *td)
{
struct ${1}_softc *scp = DEV2SOFTC(dev);
switch (cmd) {
case DHIOCRESET:
/* whatever resets it */
#if 0
${UPPER}_OUTB(SOME_PORT, 0xff);
#endif
break;
default:
return ENXIO;
}
return (0);
}
/*
* You also need read, write, open, close routines.
* This should get you started
*/
static int
${1}open(dev_t dev, int oflags, int devtype, struct thread *td)
{
struct ${1}_softc *scp = DEV2SOFTC(dev);
/*
* Do processing
*/
return (0);
}
static int
${1}close(dev_t dev, int fflag, int devtype, struct thread *td)
{
struct ${1}_softc *scp = DEV2SOFTC(dev);
/*
* Do processing
*/
return (0);
}
static int
${1}read(dev_t dev, struct uio *uio, int ioflag)
{
struct ${1}_softc *scp = DEV2SOFTC(dev);
int toread;
/*
* Do processing
* read from buffer
*/
toread = (min(uio->uio_resid, sizeof(scp->buffer)));
return(uiomove(scp->buffer, toread, uio));
}
static int
${1}write(dev_t dev, struct uio *uio, int ioflag)
{
struct ${1}_softc *scp = DEV2SOFTC(dev);
int towrite;
/*
* Do processing
* write to buffer
*/
towrite = (min(uio->uio_resid, sizeof(scp->buffer)));
return(uiomove(scp->buffer, towrite, uio));
}
static int
${1}mmap(dev_t dev, vm_offset_t offset, int nprot)
{
struct ${1}_softc *scp = DEV2SOFTC(dev);
/*
* Given a byte offset into your device, return the PHYSICAL
* page number that it would map to.
*/
#if 0 /* if we had a frame buffer or whatever.. do this */
if (offset > FRAMEBUFFERSIZE - PAGE_SIZE)
return (-1);
return i386_btop((FRAMEBASE + offset));
#else
return (-1);
#endif
}
static int
${1}poll(dev_t dev, int which, struct thread *td)
{
struct ${1}_softc *scp = DEV2SOFTC(dev);
/*
* Do processing
*/
return (0); /* this is the wrong value I'm sure */
}
DONE
cat >${TOP}/sys/${1}io.h <<DONE
/*
* Definitions needed to access the ${1} device (ioctls etc)
* see mtio.h , ioctl.h as examples
*/
#ifndef SYS_DHIO_H
#define SYS_DHIO_H
#ifndef KERNEL
#include <sys/types.h>
#endif
#include <sys/ioccom.h>
/*
* define an ioctl here
*/
#define DHIOCRESET _IO('D', 0) /* reset the ${1} device */
#endif
DONE
if [ ! -d ${TOP}/modules/${1} ]
then
mkdir -p ${TOP}/modules/${1}
fi
cat >${TOP}/modules/${1}/Makefile <<DONE
# ${UPPER} Loadable Kernel Module
#
# \$${RCS_KEYWORD}: $
.PATH: \${.CURDIR}/../../dev/${1}
KMOD = ${1}
SRCS = ${1}.c
SRCS += opt_inet.h device_if.h bus_if.h pci_if.h isa_if.h
# you may need to do this is your device is an if_xxx driver
opt_inet.h:
echo "#define INET 1" > opt_inet.h
.include <bsd.kmod.mk>
DONE
(cd ${TOP}/modules/${1}; make depend; make )
exit
config ${UPPER}
cd ../../compile/${UPPER}
make depend
make ${1}.o
make
exit
#--------------end of script---------------
#
#edit to your taste..
#
#