freebsd-dev/sys/arm/at91/at91_pioreg.h
Warner Losh 82645a84eb Tweak the disclaimer section of the license to match COPYRIGHT, for
better or worse.  Ok'd by folks that have additional copyrights to the
files in cases where there's joint authorship.
2008-11-25 00:13:26 +00:00

70 lines
3.3 KiB
C

/*-
* Copyright (c) 2006 M. Warner Losh. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/* $FreeBSD$ */
#ifndef ARM_AT91_AT91_PIOREG_H
#define ARM_AT91_AT91_PIOREG_H
/* Registers */
#define PIO_PER 0x00 /* PIO Enable Register */
#define PIO_PDR 0x04 /* PIO Disable Register */
#define PIO_PSR 0x08 /* PIO Status Register */
/* 0x0c reserved */
#define PIO_OER 0x10 /* PIO Output Enable Register */
#define PIO_ODR 0x14 /* PIO Output Disable Register */
#define PIO_OSR 0x18 /* PIO Output Status Register */
/* 0x1c reserved */
#define PIO_IFER 0x20 /* PIO Glitch Input Enable Register */
#define PIO_IFDR 0x24 /* PIO Glitch Input Disable Register */
#define PIO_IFSR 0x28 /* PIO Glitch Input Status Register */
/* 0x2c reserved */
#define PIO_SODR 0x30 /* PIO Set Output Data Register */
#define PIO_CODR 0x34 /* PIO Clear Output Data Register */
#define PIO_ODSR 0x38 /* PIO Output Data Status Register */
#define PIO_PDSR 0x3c /* PIO Pin Data Status Register */
#define PIO_IER 0x40 /* PIO Interrupt Enable Register */
#define PIO_IDR 0x44 /* PIO Interrupt Disable Register */
#define PIO_IMR 0x48 /* PIO Interrupt Mask Register */
#define PIO_ISR 0x4c /* PIO Interrupt Status Register */
#define PIO_MDER 0x50 /* PIO Multi-Driver Enable Register */
#define PIO_MDDR 0x54 /* PIO Multi-Driver Disable Register */
#define PIO_MDSR 0x58 /* PIO Multi-Driver Status Register */
/* 0x5c reserved */
#define PIO_PUDR 0x60 /* PIO Pull-up Disable Register */
#define PIO_PUER 0x64 /* PIO Pull-up Enable Register */
#define PIO_PUSR 0x68 /* PIO Pull-up Status Register */
/* 0x6c reserved */
#define PIO_ASR 0x70 /* PIO Peripheral A Select Register */
#define PIO_BSR 0x74 /* PIO Peripheral B Select Register */
#define PIO_ABSR 0x78 /* PIO AB Status Register */
/* 0x7c-0x9c reserved */
#define PIO_OWER 0xa0 /* PIO Output Write Enable Register */
#define PIO_OWDR 0xa4 /* PIO Output Write Disable Register */
#define PIO_OWSR 0xa8 /* PIO Output Write Status Register */
/* 0xac reserved */
#endif /* ARM_AT91_AT91_PIOREG_H */