1167 lines
33 KiB
C
1167 lines
33 KiB
C
/*-
|
|
* Copyright (c) 1992, 1993, 1995 Eugene W. Stark
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Eugene W. Stark.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY EUGENE W. STARK (THE AUTHOR) ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
|
|
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include "tw.h"
|
|
#if NTW > 0
|
|
|
|
/*
|
|
* Driver configuration parameters
|
|
*/
|
|
|
|
/*
|
|
* Time for 1/2 of a power line cycle, in microseconds.
|
|
* Change this to 10000 for 50Hz power. Phil Sampson
|
|
* (vk2jnt@gw.vk2jnt.ampr.org OR sampson@gidday.enet.dec.com)
|
|
* reports that this works (at least in Australia) using a
|
|
* TW7223 module (a local version of the TW523).
|
|
*/
|
|
#define HALFCYCLE 8333 /* 1/2 cycle = 8333us at 60Hz */
|
|
|
|
/*
|
|
* Undefine the following if you don't have the high-resolution "microtime"
|
|
* routines (leave defined for FreeBSD, which has them).
|
|
*/
|
|
#define HIRESTIME
|
|
|
|
/*
|
|
* End of driver configuration parameters
|
|
*/
|
|
|
|
/*
|
|
* FreeBSD Device Driver for X-10 POWERHOUSE (tm)
|
|
* Two-Way Power Line Interface, Model #TW523
|
|
*
|
|
* written by Eugene W. Stark (stark@cs.sunysb.edu)
|
|
* December 2, 1992
|
|
*
|
|
* NOTES:
|
|
*
|
|
* The TW523 is a carrier-current modem for home control/automation purposes.
|
|
* It is made by:
|
|
*
|
|
* X-10 Inc.
|
|
* 185A LeGrand Ave.
|
|
* Northvale, NJ 07647
|
|
* USA
|
|
* (201) 784-9700 or 1-800-526-0027
|
|
*
|
|
* X-10 Home Controls Inc.
|
|
* 1200 Aerowood Drive, Unit 20
|
|
* Mississauga, Ontario
|
|
* (416) 624-4446 or 1-800-387-3346
|
|
*
|
|
* The TW523 is designed for communications using the X-10 protocol,
|
|
* which is compatible with a number of home control systems, including
|
|
* Radio Shack "Plug 'n Power(tm)" and Stanley "Lightmaker(tm)."
|
|
* I bought my TW523 from:
|
|
*
|
|
* Home Control Concepts
|
|
* 9353-C Activity Road
|
|
* San Diego, CA 92126
|
|
* (619) 693-8887
|
|
*
|
|
* They supplied me with the TW523 (which has an RJ-11 four-wire modular
|
|
* telephone connector), a modular cable, an RJ-11 to DB-25 connector with
|
|
* internal wiring, documentation from X-10 on the TW523 (very good),
|
|
* an instruction manual by Home Control Concepts (not very informative),
|
|
* and a floppy disk containing binary object code of some demonstration/test
|
|
* programs and of a C function library suitable for controlling the TW523
|
|
* by an IBM PC under MS-DOS (not useful to me other than to verify that
|
|
* the unit worked). I suggest saving money and buying the bare TW523
|
|
* rather than the TW523 development kit (what I bought), because if you
|
|
* are running FreeBSD you don't really care about the DOS binaries.
|
|
*
|
|
* The interface to the TW-523 consists of four wires on the RJ-11 connector,
|
|
* which are jumpered to somewhat more wires on the DB-25 connector, which
|
|
* in turn is intended to plug into the PC parallel printer port. I dismantled
|
|
* the DB-25 connector to find out what they had done:
|
|
*
|
|
* Signal RJ-11 pin DB-25 pin(s) Parallel Port
|
|
* Transmit TX 4 (Y) 2, 4, 6, 8 Data out
|
|
* Receive RX 3 (G) 10, 14 -ACK, -AutoFeed
|
|
* Common 2 (R) 25 Common
|
|
* Zero crossing 1 (B) 17 or 12 -Select or +PaperEnd
|
|
*
|
|
* NOTE: In the original cable I have (which I am still using, May, 1997)
|
|
* the Zero crossing signal goes to pin 17 (-Select) on the parallel port.
|
|
* In retrospect, this doesn't make a whole lot of sense, given that the
|
|
* -Select signal propagates the other direction. Indeed, some people have
|
|
* reported problems with this, and have had success using pin 12 (+PaperEnd)
|
|
* instead. This driver searches for the zero crossing signal on either
|
|
* pin 17 or pin 12, so it should work with either cable configuration.
|
|
* My suggestion would be to start by making the cable so that the zero
|
|
* crossing signal goes to pin 12 on the parallel port.
|
|
*
|
|
* The zero crossing signal is used to synchronize transmission to the
|
|
* zero crossings of the AC line, as detailed in the X-10 documentation.
|
|
* It would be nice if one could generate interrupts with this signal,
|
|
* however one needs interrupts on both the rising and falling edges,
|
|
* and the -ACK signal to the parallel port interrupts only on the falling
|
|
* edge, so it can't be done without additional hardware.
|
|
*
|
|
* In this driver, the transmit function is performed in a non-interrupt-driven
|
|
* fashion, by polling the zero crossing signal to determine when a transition
|
|
* has occurred. This wastes CPU time during transmission, but it seems like
|
|
* the best that can be done without additional hardware. One problem with
|
|
* the scheme is that preemption of the CPU during transmission can cause loss
|
|
* of sync. The driver tries to catch this, by noticing that a long delay
|
|
* loop has somehow become foreshortened, and the transmission is aborted with
|
|
* an error return. It is up to the user level software to handle this
|
|
* situation (most likely by retrying the transmission).
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/uio.h>
|
|
#include <sys/syslog.h>
|
|
#include <sys/select.h>
|
|
#include <sys/poll.h>
|
|
#ifdef DEVFS
|
|
#include <sys/devfsext.h>
|
|
#endif /*DEVFS*/
|
|
|
|
#define MIN(a,b) ((a)<(b)?(a):(b))
|
|
|
|
#ifdef HIRESTIME
|
|
#include <sys/time.h>
|
|
#endif /* HIRESTIME */
|
|
|
|
#include <i386/isa/isa_device.h>
|
|
|
|
/*
|
|
* Transmission is done by calling write() to send three byte packets of data.
|
|
* The first byte contains a four bit house code (0=A to 15=P).
|
|
* The second byte contains five bit unit/key code (0=unit 1 to 15=unit 16,
|
|
* 16=All Units Off to 31 = Status Request). The third byte specifies
|
|
* the number of times the packet is to be transmitted without any
|
|
* gaps between successive transmissions. Normally this is 2, as per
|
|
* the X-10 documentation, but sometimes (e.g. for bright and dim codes)
|
|
* it can be another value. Each call to write can specify an arbitrary
|
|
* number of data bytes. An incomplete packet is buffered until a subsequent
|
|
* call to write() provides data to complete it. At most one packet will
|
|
* actually be processed in any call to write(). Successive calls to write()
|
|
* leave a three-cycle gap between transmissions, per the X-10 documentation.
|
|
*
|
|
* Reception is done using read().
|
|
* The driver produces a series of three-character packets.
|
|
* In each packet, the first character consists of flags,
|
|
* the second character is a four bit house code (0-15),
|
|
* and the third character is a five bit key/function code (0-31).
|
|
* The flags are the following:
|
|
*/
|
|
|
|
#define TW_RCV_LOCAL 1 /* The packet arrived during a local transmission */
|
|
#define TW_RCV_ERROR 2 /* An invalid/corrupted packet was received */
|
|
|
|
/*
|
|
* IBM PC parallel port definitions relevant to TW523
|
|
*/
|
|
|
|
#define tw_data 0 /* Data to tw523 (R/W) */
|
|
|
|
#define tw_status 1 /* Status of tw523 (R) */
|
|
#define TWS_RDATA 0x40 /* tw523 receive data */
|
|
#define TWS_OUT 0x20 /* pin 12, out of paper */
|
|
|
|
#define tw_control 2 /* Control tw523 (R/W) */
|
|
#define TWC_SYNC 0x08 /* tw523 sync (pin 17) */
|
|
#define TWC_ENA 0x10 /* tw523 interrupt enable */
|
|
|
|
/*
|
|
* Miscellaneous defines
|
|
*/
|
|
|
|
#define TWUNIT(dev) (minor(dev)) /* Extract unit number from device */
|
|
#define TWPRI (PZERO+8) /* I don't know any better, so let's */
|
|
/* use the same as the line printer */
|
|
|
|
static int twprobe(struct isa_device *idp);
|
|
static int twattach(struct isa_device *idp);
|
|
|
|
struct isa_driver twdriver = {
|
|
twprobe, twattach, "tw"
|
|
};
|
|
|
|
static d_open_t twopen;
|
|
static d_close_t twclose;
|
|
static d_read_t twread;
|
|
static d_write_t twwrite;
|
|
static d_poll_t twpoll;
|
|
|
|
#define CDEV_MAJOR 19
|
|
static struct cdevsw tw_cdevsw =
|
|
{ twopen, twclose, twread, twwrite, /*19*/
|
|
noioc, nullstop, nullreset, nodevtotty, /* tw */
|
|
twpoll, nommap, nostrat, "tw", NULL, -1 };
|
|
|
|
/*
|
|
* Software control structure for TW523
|
|
*/
|
|
|
|
#define TWS_XMITTING 1 /* Transmission in progress */
|
|
#define TWS_RCVING 2 /* Reception in progress */
|
|
#define TWS_WANT 4 /* A process wants received data */
|
|
#define TWS_OPEN 8 /* Is it currently open? */
|
|
|
|
#define TW_SIZE 3*60 /* Enough for about 10 sec. of input */
|
|
#define TW_MIN_DELAY 1500 /* Ignore interrupts of lesser latency */
|
|
|
|
static struct tw_sc {
|
|
u_int sc_port; /* I/O Port */
|
|
u_int sc_state; /* Current software control state */
|
|
struct selinfo sc_selp; /* Information for select() */
|
|
u_char sc_xphase; /* Current state of sync (for transmitter) */
|
|
u_char sc_rphase; /* Current state of sync (for receiver) */
|
|
u_char sc_flags; /* Flags for current reception */
|
|
short sc_rcount; /* Number of bits received so far */
|
|
int sc_bits; /* Bits received so far */
|
|
u_char sc_pkt[3]; /* Packet not yet transmitted */
|
|
short sc_pktsize; /* How many bytes in the packet? */
|
|
u_char sc_buf[TW_SIZE]; /* We buffer our own input */
|
|
int sc_nextin; /* Next free slot in circular buffer */
|
|
int sc_nextout; /* First used slot in circular buffer */
|
|
/* Callout for canceling our abortrcv timeout */
|
|
struct callout_handle abortrcv_ch;
|
|
#ifdef HIRESTIME
|
|
int sc_xtimes[22]; /* Times for bits in current xmit packet */
|
|
int sc_rtimes[22]; /* Times for bits in current rcv packet */
|
|
int sc_no_rcv; /* number of interrupts received */
|
|
#define SC_RCV_TIME_LEN 128
|
|
int sc_rcv_time[SC_RCV_TIME_LEN]; /* usec time stamp on interrupt */
|
|
#endif /* HIRESTIME */
|
|
#ifdef DEVFS
|
|
void *devfs_token; /* store the devfs handle */
|
|
#endif
|
|
} tw_sc[NTW];
|
|
|
|
static int tw_zcport; /* offset of port for zero crossing signal */
|
|
static int tw_zcmask; /* mask for the zero crossing signal */
|
|
|
|
static void twdelay25(void);
|
|
static void twdelayn(int n);
|
|
static void twsetuptimes(int *a);
|
|
static int wait_for_zero(struct tw_sc *sc);
|
|
static int twputpkt(struct tw_sc *sc, u_char *p);
|
|
static int twgetbytes(struct tw_sc *sc, u_char *p, int cnt);
|
|
static timeout_t twabortrcv;
|
|
static int twsend(struct tw_sc *sc, int h, int k, int cnt);
|
|
static int next_zero(struct tw_sc *sc);
|
|
static int twchecktime(int target, int tol);
|
|
static void twdebugtimes(struct tw_sc *sc);
|
|
|
|
/*
|
|
* Counter value for delay loop.
|
|
* It is adjusted by twprobe so that the delay loop takes about 25us.
|
|
*/
|
|
|
|
#define TWDELAYCOUNT 161 /* Works on my 486DX/33 */
|
|
static int twdelaycount;
|
|
|
|
/*
|
|
* Twdelay25 is used for very short delays of about 25us.
|
|
* It is implemented with a calibrated delay loop, and should be
|
|
* fairly accurate ... unless we are preempted by an interrupt.
|
|
*
|
|
* We use this to wait for zero crossings because the X-10 specs say we
|
|
* are supposed to assert carrier within 25us when one happens.
|
|
* I don't really believe we can do this, but the X-10 devices seem to be
|
|
* fairly forgiving.
|
|
*/
|
|
|
|
static void twdelay25(void)
|
|
{
|
|
int cnt;
|
|
for(cnt = twdelaycount; cnt; cnt--); /* Should take about 25us */
|
|
}
|
|
|
|
/*
|
|
* Twdelayn is used to time the length of the 1ms carrier pulse.
|
|
* This is not very critical, but if we have high-resolution time-of-day
|
|
* we check it every apparent 200us to make sure we don't get too far off
|
|
* if we happen to be interrupted during the delay.
|
|
*/
|
|
|
|
static void twdelayn(int n)
|
|
{
|
|
#ifdef HIRESTIME
|
|
int t, d;
|
|
struct timeval tv;
|
|
microtime(&tv);
|
|
t = tv.tv_usec;
|
|
t += n;
|
|
#endif /* HIRESTIME */
|
|
while(n > 0) {
|
|
twdelay25();
|
|
n -= 25;
|
|
#ifdef HIRESTIME
|
|
if((n & 0x7) == 0) {
|
|
microtime(&tv);
|
|
d = tv.tv_usec - t;
|
|
if(d >= 0 && d < 1000000) return;
|
|
}
|
|
#endif /* HIRESTIME */
|
|
}
|
|
}
|
|
|
|
static int twprobe(idp)
|
|
struct isa_device *idp;
|
|
{
|
|
struct tw_sc sc;
|
|
int d;
|
|
int tries;
|
|
|
|
sc.sc_port = idp->id_iobase;
|
|
/* Search for the zero crossing signal at ports, bit combinations. */
|
|
tw_zcport = tw_control;
|
|
tw_zcmask = TWC_SYNC;
|
|
sc.sc_xphase = inb(idp->id_iobase + tw_zcport) & tw_zcmask;
|
|
if(wait_for_zero(&sc) < 0) {
|
|
tw_zcport = tw_status;
|
|
tw_zcmask = TWS_OUT;
|
|
sc.sc_xphase = inb(idp->id_iobase + tw_zcport) & tw_zcmask;
|
|
}
|
|
if(wait_for_zero(&sc) < 0)
|
|
return(0);
|
|
/*
|
|
* Iteratively check the timing of a few sync transitions, and adjust
|
|
* the loop delay counter, if necessary, to bring the timing reported
|
|
* by wait_for_zero() close to HALFCYCLE. Give up if anything
|
|
* ridiculous happens.
|
|
*/
|
|
if(twdelaycount == 0) { /* Only adjust timing for first unit */
|
|
twdelaycount = TWDELAYCOUNT;
|
|
for(tries = 0; tries < 10; tries++) {
|
|
sc.sc_xphase = inb(idp->id_iobase + tw_zcport) & tw_zcmask;
|
|
if(wait_for_zero(&sc) >= 0) {
|
|
d = wait_for_zero(&sc);
|
|
if(d <= HALFCYCLE/100 || d >= HALFCYCLE*100) {
|
|
twdelaycount = 0;
|
|
return(0);
|
|
}
|
|
twdelaycount = (twdelaycount * d)/HALFCYCLE;
|
|
}
|
|
}
|
|
}
|
|
/*
|
|
* Now do a final check, just to make sure
|
|
*/
|
|
sc.sc_xphase = inb(idp->id_iobase + tw_zcport) & tw_zcmask;
|
|
if(wait_for_zero(&sc) >= 0) {
|
|
d = wait_for_zero(&sc);
|
|
if(d <= (HALFCYCLE * 110)/100 && d >= (HALFCYCLE * 90)/100) return(8);
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
static int twattach(idp)
|
|
struct isa_device *idp;
|
|
{
|
|
struct tw_sc *sc;
|
|
int unit;
|
|
|
|
sc = &tw_sc[unit = idp->id_unit];
|
|
sc->sc_port = idp->id_iobase;
|
|
sc->sc_state = 0;
|
|
sc->sc_rcount = 0;
|
|
callout_handle_init(&sc->abortrcv_ch);
|
|
|
|
#ifdef DEVFS
|
|
sc->devfs_token =
|
|
devfs_add_devswf(&tw_cdevsw, unit, DV_CHR, 0, 0,
|
|
0600, "tw%d", unit);
|
|
#endif
|
|
|
|
return (1);
|
|
}
|
|
|
|
int twopen(dev, flag, mode, p)
|
|
dev_t dev;
|
|
int flag;
|
|
int mode;
|
|
struct proc *p;
|
|
{
|
|
struct tw_sc *sc = &tw_sc[TWUNIT(dev)];
|
|
int s;
|
|
int port;
|
|
|
|
s = spltty();
|
|
if(sc->sc_state == 0) {
|
|
sc->sc_state = TWS_OPEN;
|
|
sc->sc_nextin = sc->sc_nextout = 0;
|
|
sc->sc_pktsize = 0;
|
|
outb(sc->sc_port+tw_control, TWC_ENA);
|
|
}
|
|
splx(s);
|
|
return(0);
|
|
}
|
|
|
|
int twclose(dev, flag, mode, p)
|
|
dev_t dev;
|
|
int flag;
|
|
int mode;
|
|
struct proc *p;
|
|
{
|
|
struct tw_sc *sc = &tw_sc[TWUNIT(dev)];
|
|
int s;
|
|
int port = sc->sc_port;
|
|
|
|
s = spltty();
|
|
sc->sc_state = 0;
|
|
outb(sc->sc_port+tw_control, 0);
|
|
splx(s);
|
|
return(0);
|
|
}
|
|
|
|
int twread(dev, uio, ioflag)
|
|
dev_t dev;
|
|
struct uio *uio;
|
|
int ioflag;
|
|
{
|
|
u_char buf[3];
|
|
struct tw_sc *sc = &tw_sc[TWUNIT(dev)];
|
|
int error, cnt, s;
|
|
|
|
s = spltty();
|
|
cnt = MIN(uio->uio_resid, 3);
|
|
if((error = twgetbytes(sc, buf, cnt)) == 0) {
|
|
error = uiomove(buf, cnt, uio);
|
|
}
|
|
splx(s);
|
|
return(error);
|
|
}
|
|
|
|
int twwrite(dev, uio, ioflag)
|
|
dev_t dev;
|
|
struct uio *uio;
|
|
int ioflag;
|
|
{
|
|
struct tw_sc *sc;
|
|
int house, key, reps;
|
|
int s, error;
|
|
int cnt;
|
|
|
|
sc = &tw_sc[TWUNIT(dev)];
|
|
/*
|
|
* Note: Although I had intended to allow concurrent transmitters,
|
|
* there is a potential problem here if two processes both write
|
|
* into the sc_pkt buffer at the same time. The following code
|
|
* is an additional critical section that needs to be synchronized.
|
|
*/
|
|
s = spltty();
|
|
cnt = MIN(3 - sc->sc_pktsize, uio->uio_resid);
|
|
if(error = uiomove(&(sc->sc_pkt[sc->sc_pktsize]), cnt, uio)) {
|
|
splx(s);
|
|
return(error);
|
|
}
|
|
sc->sc_pktsize += cnt;
|
|
if(sc->sc_pktsize < 3) { /* Only transmit 3-byte packets */
|
|
splx(s);
|
|
return(0);
|
|
}
|
|
sc->sc_pktsize = 0;
|
|
/*
|
|
* Collect house code, key code, and rep count, and check for sanity.
|
|
*/
|
|
house = sc->sc_pkt[0];
|
|
key = sc->sc_pkt[1];
|
|
reps = sc->sc_pkt[2];
|
|
if(house >= 16 || key >= 32) {
|
|
splx(s);
|
|
return(ENODEV);
|
|
}
|
|
/*
|
|
* Synchronize with the receiver operating in the bottom half, and
|
|
* also with concurrent transmitters.
|
|
* We don't want to interfere with a packet currently being received,
|
|
* and we would like the receiver to recognize when a packet has
|
|
* originated locally.
|
|
*/
|
|
while(sc->sc_state & (TWS_RCVING | TWS_XMITTING)) {
|
|
if(error = tsleep((caddr_t)sc, TWPRI|PCATCH, "twwrite", 0)) {
|
|
splx(s);
|
|
return(error);
|
|
}
|
|
}
|
|
sc->sc_state |= TWS_XMITTING;
|
|
/*
|
|
* Everything looks OK, let's do the transmission.
|
|
*/
|
|
splx(s); /* Enable interrupts because this takes a LONG time */
|
|
error = twsend(sc, house, key, reps);
|
|
s = spltty();
|
|
sc->sc_state &= ~TWS_XMITTING;
|
|
wakeup((caddr_t)sc);
|
|
splx(s);
|
|
if(error) return(EIO);
|
|
else return(0);
|
|
}
|
|
|
|
/*
|
|
* Determine if there is data available for reading
|
|
*/
|
|
|
|
int twpoll(dev, events, p)
|
|
dev_t dev;
|
|
int events;
|
|
struct proc *p;
|
|
{
|
|
struct tw_sc *sc;
|
|
int s;
|
|
int revents = 0;
|
|
|
|
sc = &tw_sc[TWUNIT(dev)];
|
|
s = spltty();
|
|
/* XXX is this correct? the original code didn't test select rw mode!! */
|
|
if (events & (POLLIN | POLLRDNORM))
|
|
if(sc->sc_nextin != sc->sc_nextout)
|
|
revents |= events & (POLLIN | POLLRDNORM);
|
|
else
|
|
selrecord(p, &sc->sc_selp);
|
|
|
|
splx(s);
|
|
return(revents);
|
|
}
|
|
|
|
/*
|
|
* X-10 Protocol
|
|
*/
|
|
|
|
#define X10_START_LENGTH 4
|
|
static char X10_START[] = { 1, 1, 1, 0 };
|
|
|
|
/*
|
|
* Each bit of the 4-bit house code and 5-bit key code
|
|
* is transmitted twice, once in true form, and then in
|
|
* complemented form. This is already taken into account
|
|
* in the following tables.
|
|
*/
|
|
|
|
#define X10_HOUSE_LENGTH 8
|
|
static char X10_HOUSE[16][8] = {
|
|
0, 1, 1, 0, 1, 0, 0, 1, /* A = 0110 */
|
|
1, 0, 1, 0, 1, 0, 0, 1, /* B = 1110 */
|
|
0, 1, 0, 1, 1, 0, 0, 1, /* C = 0010 */
|
|
1, 0, 0, 1, 1, 0, 0, 1, /* D = 1010 */
|
|
0, 1, 0, 1, 0, 1, 1, 0, /* E = 0001 */
|
|
1, 0, 0, 1, 0, 1, 1, 0, /* F = 1001 */
|
|
0, 1, 1, 0, 0, 1, 1, 0, /* G = 0101 */
|
|
1, 0, 1, 0, 0, 1, 1, 0, /* H = 1101 */
|
|
0, 1, 1, 0, 1, 0, 1, 0, /* I = 0111 */
|
|
1, 0, 1, 0, 1, 0, 1, 0, /* J = 1111 */
|
|
0, 1, 0, 1, 1, 0, 1, 0, /* K = 0011 */
|
|
1, 0, 0, 1, 1, 0, 1, 0, /* L = 1011 */
|
|
0, 1, 0, 1, 0, 1, 0, 1, /* M = 0000 */
|
|
1, 0, 0, 1, 0, 1, 0, 1, /* N = 1000 */
|
|
0, 1, 1, 0, 0, 1, 0, 1, /* O = 0100 */
|
|
1, 0, 1, 0, 0, 1, 0, 1 /* P = 1100 */
|
|
};
|
|
|
|
#define X10_KEY_LENGTH 10
|
|
static char X10_KEY[32][10] = {
|
|
0, 1, 1, 0, 1, 0, 0, 1, 0, 1, /* 01100 => 1 */
|
|
1, 0, 1, 0, 1, 0, 0, 1, 0, 1, /* 11100 => 2 */
|
|
0, 1, 0, 1, 1, 0, 0, 1, 0, 1, /* 00100 => 3 */
|
|
1, 0, 0, 1, 1, 0, 0, 1, 0, 1, /* 10100 => 4 */
|
|
0, 1, 0, 1, 0, 1, 1, 0, 0, 1, /* 00010 => 5 */
|
|
1, 0, 0, 1, 0, 1, 1, 0, 0, 1, /* 10010 => 6 */
|
|
0, 1, 1, 0, 0, 1, 1, 0, 0, 1, /* 01010 => 7 */
|
|
1, 0, 1, 0, 0, 1, 1, 0, 0, 1, /* 11010 => 8 */
|
|
0, 1, 1, 0, 1, 0, 1, 0, 0, 1, /* 01110 => 9 */
|
|
1, 0, 1, 0, 1, 0, 1, 0, 0, 1, /* 11110 => 10 */
|
|
0, 1, 0, 1, 1, 0, 1, 0, 0, 1, /* 00110 => 11 */
|
|
1, 0, 0, 1, 1, 0, 1, 0, 0, 1, /* 10110 => 12 */
|
|
0, 1, 0, 1, 0, 1, 0, 1, 0, 1, /* 00000 => 13 */
|
|
1, 0, 0, 1, 0, 1, 0, 1, 0, 1, /* 10000 => 14 */
|
|
0, 1, 1, 0, 0, 1, 0, 1, 0, 1, /* 01000 => 15 */
|
|
1, 0, 1, 0, 0, 1, 0, 1, 0, 1, /* 11000 => 16 */
|
|
0, 1, 0, 1, 0, 1, 0, 1, 1, 0, /* 00001 => All Units Off */
|
|
0, 1, 0, 1, 0, 1, 1, 0, 1, 0, /* 00011 => All Units On */
|
|
0, 1, 0, 1, 1, 0, 0, 1, 1, 0, /* 00101 => On */
|
|
0, 1, 0, 1, 1, 0, 1, 0, 1, 0, /* 00111 => Off */
|
|
0, 1, 1, 0, 0, 1, 0, 1, 1, 0, /* 01001 => Dim */
|
|
0, 1, 1, 0, 0, 1, 1, 0, 1, 0, /* 01011 => Bright */
|
|
0, 1, 1, 0, 1, 0, 0, 1, 1, 0, /* 01101 => All LIGHTS Off */
|
|
0, 1, 1, 0, 1, 0, 1, 0, 1, 0, /* 01111 => Extended Code */
|
|
1, 0, 0, 1, 0, 1, 0, 1, 1, 0, /* 10001 => Hail Request */
|
|
1, 0, 0, 1, 0, 1, 1, 0, 1, 0, /* 10011 => Hail Acknowledge */
|
|
1, 0, 0, 1, 1, 0, 0, 1, 1, 0, /* 10101 => Preset Dim 0 */
|
|
1, 0, 0, 1, 1, 0, 1, 0, 1, 0, /* 10111 => Preset Dim 1 */
|
|
1, 0, 1, 0, 0, 1, 0, 1, 0, 1, /* 11000 => Extended Data (analog) */
|
|
1, 0, 1, 0, 0, 1, 1, 0, 1, 0, /* 11011 => Status = on */
|
|
1, 0, 1, 0, 1, 0, 0, 1, 1, 0, /* 11101 => Status = off */
|
|
1, 0, 1, 0, 1, 0, 1, 0, 1, 0 /* 11111 => Status request */
|
|
};
|
|
|
|
/*
|
|
* Tables for mapping received X-10 code back to house/key number.
|
|
*/
|
|
|
|
static short X10_HOUSE_INV[16] = {
|
|
12, 4, 2, 10, 14, 6, 0, 8,
|
|
13, 5, 3, 11, 15, 7, 1, 9
|
|
};
|
|
|
|
static short X10_KEY_INV[32] = {
|
|
12, 16, 4, 17, 2, 18, 10, 19,
|
|
14, 20, 6, 21, 0, 22, 8, 23,
|
|
13, 24, 5, 25, 3, 26, 11, 27,
|
|
15, 28, 7, 29, 1, 30, 9, 31
|
|
};
|
|
|
|
static char *X10_KEY_LABEL[32] = {
|
|
"1",
|
|
"2",
|
|
"3",
|
|
"4",
|
|
"5",
|
|
"6",
|
|
"7",
|
|
"8",
|
|
"9",
|
|
"10",
|
|
"11",
|
|
"12",
|
|
"13",
|
|
"14",
|
|
"15",
|
|
"16",
|
|
"All Units Off",
|
|
"All Units On",
|
|
"On",
|
|
"Off",
|
|
"Dim",
|
|
"Bright",
|
|
"All LIGHTS Off",
|
|
"Extended Code",
|
|
"Hail Request",
|
|
"Hail Acknowledge",
|
|
"Preset Dim 0",
|
|
"Preset Dim 1",
|
|
"Extended Data (analog)",
|
|
"Status = on",
|
|
"Status = off",
|
|
"Status request"
|
|
};
|
|
/*
|
|
* Transmit a packet containing house code h and key code k
|
|
*/
|
|
|
|
#define TWRETRY 10 /* Try 10 times to sync with AC line */
|
|
|
|
static int twsend(sc, h, k, cnt)
|
|
struct tw_sc *sc;
|
|
int h, k, cnt;
|
|
{
|
|
int i;
|
|
int port = sc->sc_port;
|
|
|
|
/*
|
|
* Make sure we get a reliable sync with a power line zero crossing
|
|
*/
|
|
for(i = 0; i < TWRETRY; i++) {
|
|
if(wait_for_zero(sc) > 100) goto insync;
|
|
}
|
|
log(LOG_ERR, "TWXMIT: failed to sync.\n");
|
|
return(-1);
|
|
|
|
insync:
|
|
/*
|
|
* Be sure to leave 3 cycles space between transmissions
|
|
*/
|
|
for(i = 6; i > 0; i--)
|
|
if(next_zero(sc) < 0) return(-1);
|
|
/*
|
|
* The packet is transmitted cnt times, with no gaps.
|
|
*/
|
|
while(cnt--) {
|
|
/*
|
|
* Transmit the start code
|
|
*/
|
|
for(i = 0; i < X10_START_LENGTH; i++) {
|
|
outb(port+tw_data, X10_START[i] ? 0xff : 0x00); /* Waste no time! */
|
|
#ifdef HIRESTIME
|
|
if(i == 0) twsetuptimes(sc->sc_xtimes);
|
|
if(twchecktime(sc->sc_xtimes[i], HALFCYCLE/20) == 0) {
|
|
outb(port+tw_data, 0);
|
|
return(-1);
|
|
}
|
|
#endif /* HIRESTIME */
|
|
twdelayn(1000); /* 1ms pulse width */
|
|
outb(port+tw_data, 0);
|
|
if(next_zero(sc) < 0) return(-1);
|
|
}
|
|
/*
|
|
* Transmit the house code
|
|
*/
|
|
for(i = 0; i < X10_HOUSE_LENGTH; i++) {
|
|
outb(port+tw_data, X10_HOUSE[h][i] ? 0xff : 0x00); /* Waste no time! */
|
|
#ifdef HIRESTIME
|
|
if(twchecktime(sc->sc_xtimes[i+X10_START_LENGTH], HALFCYCLE/20) == 0) {
|
|
outb(port+tw_data, 0);
|
|
return(-1);
|
|
}
|
|
#endif /* HIRESTIME */
|
|
twdelayn(1000); /* 1ms pulse width */
|
|
outb(port+tw_data, 0);
|
|
if(next_zero(sc) < 0) return(-1);
|
|
}
|
|
/*
|
|
* Transmit the unit/key code
|
|
*/
|
|
for(i = 0; i < X10_KEY_LENGTH; i++) {
|
|
outb(port+tw_data, X10_KEY[k][i] ? 0xff : 0x00);
|
|
#ifdef HIRESTIME
|
|
if(twchecktime(sc->sc_xtimes[i+X10_START_LENGTH+X10_HOUSE_LENGTH],
|
|
HALFCYCLE/20) == 0) {
|
|
outb(port+tw_data, 0);
|
|
return(-1);
|
|
}
|
|
#endif /* HIRESTIME */
|
|
twdelayn(1000); /* 1ms pulse width */
|
|
outb(port+tw_data, 0);
|
|
if(next_zero(sc) < 0) return(-1);
|
|
}
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Waste CPU cycles to get in sync with a power line zero crossing.
|
|
* The value returned is roughly how many microseconds we wasted before
|
|
* seeing the transition. To avoid wasting time forever, we give up after
|
|
* waiting patiently for 1/4 sec (15 power line cycles at 60 Hz),
|
|
* which is more than the 11 cycles it takes to transmit a full
|
|
* X-10 packet.
|
|
*/
|
|
|
|
static int wait_for_zero(sc)
|
|
struct tw_sc *sc;
|
|
{
|
|
int i, old, new, max;
|
|
int port = sc->sc_port + tw_zcport;
|
|
|
|
old = sc->sc_xphase;
|
|
max = 10000; /* 10000 * 25us = 0.25 sec */
|
|
i = 0;
|
|
while(max--) {
|
|
new = inb(port) & tw_zcmask;
|
|
if(new != old) {
|
|
sc->sc_xphase = new;
|
|
return(i*25);
|
|
}
|
|
i++;
|
|
twdelay25();
|
|
}
|
|
return(-1);
|
|
}
|
|
|
|
/*
|
|
* Wait for the next zero crossing transition, and if we don't have
|
|
* high-resolution time-of-day, check to see that the zero crossing
|
|
* appears to be arriving on schedule.
|
|
* We expect to be waiting almost a full half-cycle (8.333ms-1ms = 7.333ms).
|
|
* If we don't seem to wait very long, something is wrong (like we got
|
|
* preempted!) and we should abort the transmission because
|
|
* there's no telling how long it's really been since the
|
|
* last bit was transmitted.
|
|
*/
|
|
|
|
static int next_zero(sc)
|
|
struct tw_sc *sc;
|
|
{
|
|
int d;
|
|
#ifdef HIRESTIME
|
|
if((d = wait_for_zero(sc)) < 0) {
|
|
#else
|
|
if((d = wait_for_zero(sc)) < 6000 || d > 8500) {
|
|
/* No less than 6.0ms, no more than 8.5ms */
|
|
#endif /* HIRESTIME */
|
|
log(LOG_ERR, "TWXMIT framing error: %d\n", d);
|
|
return(-1);
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Put a three-byte packet into the circular buffer
|
|
* Should be called at priority spltty()
|
|
*/
|
|
|
|
static int twputpkt(sc, p)
|
|
struct tw_sc *sc;
|
|
u_char *p;
|
|
{
|
|
int i, next;
|
|
|
|
for(i = 0; i < 3; i++) {
|
|
next = sc->sc_nextin+1;
|
|
if(next >= TW_SIZE) next = 0;
|
|
if(next == sc->sc_nextout) { /* Buffer full */
|
|
/*
|
|
log(LOG_ERR, "TWRCV: Buffer overrun\n");
|
|
*/
|
|
return(1);
|
|
}
|
|
sc->sc_buf[sc->sc_nextin] = *p++;
|
|
sc->sc_nextin = next;
|
|
}
|
|
if(sc->sc_state & TWS_WANT) {
|
|
sc->sc_state &= ~TWS_WANT;
|
|
wakeup((caddr_t)(&sc->sc_buf));
|
|
}
|
|
selwakeup(&sc->sc_selp);
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Get bytes from the circular buffer
|
|
* Should be called at priority spltty()
|
|
*/
|
|
|
|
static int twgetbytes(sc, p, cnt)
|
|
struct tw_sc *sc;
|
|
u_char *p;
|
|
int cnt;
|
|
{
|
|
int error;
|
|
|
|
while(cnt--) {
|
|
while(sc->sc_nextin == sc->sc_nextout) { /* Buffer empty */
|
|
sc->sc_state |= TWS_WANT;
|
|
if(error = tsleep((caddr_t)(&sc->sc_buf), TWPRI|PCATCH, "twread", 0)) {
|
|
return(error);
|
|
}
|
|
}
|
|
*p++ = sc->sc_buf[sc->sc_nextout++];
|
|
if(sc->sc_nextout >= TW_SIZE) sc->sc_nextout = 0;
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Abort reception that has failed to complete in the required time.
|
|
*/
|
|
|
|
static void
|
|
twabortrcv(arg)
|
|
void *arg;
|
|
{
|
|
struct tw_sc *sc = arg;
|
|
int s;
|
|
u_char pkt[3];
|
|
|
|
s = spltty();
|
|
sc->sc_state &= ~TWS_RCVING;
|
|
/* simply ignore single isolated interrupts. */
|
|
if (sc->sc_no_rcv > 1) {
|
|
sc->sc_flags |= TW_RCV_ERROR;
|
|
pkt[0] = sc->sc_flags;
|
|
pkt[1] = pkt[2] = 0;
|
|
twputpkt(sc, pkt);
|
|
log(LOG_ERR, "TWRCV: aborting (%x, %d)\n", sc->sc_bits, sc->sc_rcount);
|
|
twdebugtimes(sc);
|
|
}
|
|
wakeup((caddr_t)sc);
|
|
splx(s);
|
|
}
|
|
|
|
static int
|
|
tw_is_within(int value, int expected, int tolerance)
|
|
{
|
|
int diff;
|
|
diff = value - expected;
|
|
if (diff < 0)
|
|
diff *= -1;
|
|
if (diff < tolerance)
|
|
return 1;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This routine handles interrupts that occur when there is a falling
|
|
* transition on the RX input. There isn't going to be a transition
|
|
* on every bit (some are zero), but if we are smart and keep track of
|
|
* how long it's been since the last interrupt (via the zero crossing
|
|
* detect line and/or high-resolution time-of-day routine), we can
|
|
* reconstruct the transmission without having to poll.
|
|
*/
|
|
|
|
void twintr(unit)
|
|
int unit;
|
|
{
|
|
struct tw_sc *sc = &tw_sc[unit];
|
|
int port;
|
|
int newphase;
|
|
u_char pkt[3];
|
|
int delay = 0;
|
|
struct timeval tv;
|
|
|
|
port = sc->sc_port;
|
|
/*
|
|
* Ignore any interrupts that occur if the device is not open.
|
|
*/
|
|
if(sc->sc_state == 0) return;
|
|
newphase = inb(port + tw_zcport) & tw_zcmask;
|
|
microtime(&tv);
|
|
|
|
/*
|
|
* NEW PACKET:
|
|
* If we aren't currently receiving a packet, set up a new packet
|
|
* and put in the first "1" bit that has just arrived.
|
|
* Arrange for the reception to be aborted if too much time goes by.
|
|
*/
|
|
if((sc->sc_state & TWS_RCVING) == 0) {
|
|
#ifdef HIRESTIME
|
|
twsetuptimes(sc->sc_rtimes);
|
|
#endif /* HIRESTIME */
|
|
sc->sc_state |= TWS_RCVING;
|
|
sc->sc_rcount = 1;
|
|
if(sc->sc_state & TWS_XMITTING) sc->sc_flags = TW_RCV_LOCAL;
|
|
else sc->sc_flags = 0;
|
|
sc->sc_bits = 0;
|
|
sc->sc_rphase = newphase;
|
|
/* 3 cycles of silence = 3/60 = 1/20 = 50 msec */
|
|
sc->abortrcv_ch = timeout(twabortrcv, (caddr_t)sc, hz/20);
|
|
sc->sc_rcv_time[0] = tv.tv_usec;
|
|
sc->sc_no_rcv = 1;
|
|
return;
|
|
}
|
|
untimeout(twabortrcv, (caddr_t)sc, sc->abortrcv_ch);
|
|
sc->abortrcv_ch = timeout(twabortrcv, (caddr_t)sc, hz/20);
|
|
newphase = inb(port + tw_zcport) & tw_zcmask;
|
|
|
|
/* enforce a minimum delay since the last interrupt */
|
|
delay = tv.tv_usec - sc->sc_rcv_time[sc->sc_no_rcv - 1];
|
|
if (delay < 0)
|
|
delay += 1000000;
|
|
if (delay < TW_MIN_DELAY)
|
|
return;
|
|
|
|
sc->sc_rcv_time[sc->sc_no_rcv] = tv.tv_usec;
|
|
if (sc->sc_rcv_time[sc->sc_no_rcv] < sc->sc_rcv_time[0])
|
|
sc->sc_rcv_time[sc->sc_no_rcv] += 1000000;
|
|
sc->sc_no_rcv++;
|
|
|
|
/*
|
|
* START CODE:
|
|
* The second and third bits are a special case.
|
|
*/
|
|
if (sc->sc_rcount < 3) {
|
|
if (
|
|
#ifdef HIRESTIME
|
|
tw_is_within(delay, HALFCYCLE, HALFCYCLE / 6)
|
|
#else
|
|
newphase != sc->sc_rphase
|
|
#endif
|
|
) {
|
|
sc->sc_rcount++;
|
|
} else {
|
|
/*
|
|
* Invalid start code -- abort reception.
|
|
*/
|
|
sc->sc_state &= ~TWS_RCVING;
|
|
sc->sc_flags |= TW_RCV_ERROR;
|
|
untimeout(twabortrcv, (caddr_t)sc, sc->abortrcv_ch);
|
|
log(LOG_ERR, "TWRCV: Invalid start code\n");
|
|
twdebugtimes(sc);
|
|
sc->sc_no_rcv = 0;
|
|
return;
|
|
}
|
|
if(sc->sc_rcount == 3) {
|
|
/*
|
|
* We've gotten three "1" bits in a row. The start code
|
|
* is really 1110, but this might be followed by a zero
|
|
* bit from the house code, so if we wait any longer we
|
|
* might be confused about the first house code bit.
|
|
* So, we guess that the start code is correct and insert
|
|
* the trailing zero without actually having seen it.
|
|
* We don't change sc_rphase in this case, because two
|
|
* bit arrivals in a row preserve parity.
|
|
*/
|
|
sc->sc_rcount++;
|
|
return;
|
|
}
|
|
/*
|
|
* Update sc_rphase to the current phase before returning.
|
|
*/
|
|
sc->sc_rphase = newphase;
|
|
return;
|
|
}
|
|
/*
|
|
* GENERAL CASE:
|
|
* Now figure out what the current bit is that just arrived.
|
|
* The X-10 protocol transmits each data bit twice: once in
|
|
* true form and once in complemented form on the next half
|
|
* cycle. So, there will be at least one interrupt per bit.
|
|
* By comparing the phase we see at the time of the interrupt
|
|
* with the saved sc_rphase, we can tell on which half cycle
|
|
* the interrupt occrred. This assumes, of course, that the
|
|
* packet is well-formed. We do the best we can at trying to
|
|
* catch errors by aborting if too much time has gone by, and
|
|
* by tossing out a packet if too many bits arrive, but the
|
|
* whole scheme is probably not as robust as if we had a nice
|
|
* interrupt on every half cycle of the power line.
|
|
* If we have high-resolution time-of-day routines, then we
|
|
* can do a bit more sanity checking.
|
|
*/
|
|
|
|
/*
|
|
* A complete packet is 22 half cycles.
|
|
*/
|
|
if(sc->sc_rcount <= 20) {
|
|
#ifdef HIRESTIME
|
|
int bit = 0, last_bit;
|
|
if (sc->sc_rcount == 4)
|
|
last_bit = 1; /* Start (1110) ends in 10, a 'one' code. */
|
|
else
|
|
last_bit = sc->sc_bits & 0x1;
|
|
if ( ( (last_bit == 1)
|
|
&& (tw_is_within(delay, HALFCYCLE * 2, HALFCYCLE / 6)))
|
|
|| ( (last_bit == 0)
|
|
&& (tw_is_within(delay, HALFCYCLE * 1, HALFCYCLE / 6))))
|
|
bit = 1;
|
|
else if ( ( (last_bit == 1)
|
|
&& (tw_is_within(delay, HALFCYCLE * 3, HALFCYCLE / 6)))
|
|
|| ( (last_bit == 0)
|
|
&& (tw_is_within(delay, HALFCYCLE * 2, HALFCYCLE / 6))))
|
|
bit = 0;
|
|
else {
|
|
sc->sc_flags |= TW_RCV_ERROR;
|
|
log(LOG_ERR, "TWRCV: %d cycle after %d bit, delay %d%%\n",
|
|
sc->sc_rcount, last_bit, 100 * delay / HALFCYCLE);
|
|
}
|
|
sc->sc_bits = (sc->sc_bits << 1) | bit;
|
|
#else
|
|
sc->sc_bits = (sc->sc_bits << 1)
|
|
| ((newphase == sc->sc_rphase) ? 0x0 : 0x1);
|
|
#endif /* HIRESTIME */
|
|
sc->sc_rcount += 2;
|
|
}
|
|
if(sc->sc_rcount >= 22 || sc->sc_flags & TW_RCV_ERROR) {
|
|
if(sc->sc_rcount != 22) {
|
|
sc->sc_flags |= TW_RCV_ERROR;
|
|
pkt[0] = sc->sc_flags;
|
|
pkt[1] = pkt[2] = 0;
|
|
} else {
|
|
pkt[0] = sc->sc_flags;
|
|
pkt[1] = X10_HOUSE_INV[(sc->sc_bits & 0x1e0) >> 5];
|
|
pkt[2] = X10_KEY_INV[sc->sc_bits & 0x1f];
|
|
}
|
|
sc->sc_state &= ~TWS_RCVING;
|
|
twputpkt(sc, pkt);
|
|
untimeout(twabortrcv, (caddr_t)sc, sc->abortrcv_ch);
|
|
if(sc->sc_flags & TW_RCV_ERROR) {
|
|
log(LOG_ERR, "TWRCV: invalid packet: (%d, %x) %c %d\n",
|
|
sc->sc_rcount, sc->sc_bits, 'A' + pkt[1], X10_KEY_LABEL[pkt[2]]);
|
|
twdebugtimes(sc);
|
|
} else {
|
|
/* log(LOG_ERR, "TWRCV: valid packet: (%d, %x) %c %s\n",
|
|
sc->sc_rcount, sc->sc_bits, 'A' + pkt[1], X10_KEY_LABEL[pkt[2]]); */
|
|
}
|
|
sc->sc_rcount = 0;
|
|
wakeup((caddr_t)sc);
|
|
}
|
|
}
|
|
|
|
static void twdebugtimes(struct tw_sc *sc)
|
|
{
|
|
int i;
|
|
for (i = 0; (i < sc->sc_no_rcv) && (i < SC_RCV_TIME_LEN); i++)
|
|
log(LOG_ERR, "TWRCV: interrupt %2d: %d\t%d%%\n", i, sc->sc_rcv_time[i],
|
|
(sc->sc_rcv_time[i] - sc->sc_rcv_time[(i?i-1:0)])*100/HALFCYCLE);
|
|
}
|
|
|
|
#ifdef HIRESTIME
|
|
/*
|
|
* Initialize an array of 22 times, starting from the current
|
|
* microtime and continuing for the next 21 half cycles.
|
|
* We use the times as a reference to make sure transmission
|
|
* or reception is on schedule.
|
|
*/
|
|
|
|
static void twsetuptimes(int *a)
|
|
{
|
|
struct timeval tv;
|
|
int i, t;
|
|
|
|
microtime(&tv);
|
|
t = tv.tv_usec;
|
|
for(i = 0; i < 22; i++) {
|
|
*a++ = t;
|
|
t += HALFCYCLE;
|
|
if(t >= 1000000) t -= 1000000;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Check the current time against a slot in a previously set up
|
|
* timing array, and make sure that it looks like we are still
|
|
* on schedule.
|
|
*/
|
|
|
|
static int twchecktime(int target, int tol)
|
|
{
|
|
struct timeval tv;
|
|
int t, d;
|
|
|
|
microtime(&tv);
|
|
t = tv.tv_usec;
|
|
d = (target - t) >= 0 ? (target - t) : (t - target);
|
|
if(d > 500000) d = 1000000-d;
|
|
if(d <= tol && d >= -tol) {
|
|
return(1);
|
|
} else {
|
|
return(0);
|
|
}
|
|
}
|
|
#endif /* HIRESTIME */
|
|
|
|
|
|
static tw_devsw_installed = 0;
|
|
|
|
static void tw_drvinit(void *unused)
|
|
{
|
|
dev_t dev;
|
|
|
|
if( ! tw_devsw_installed ) {
|
|
dev = makedev(CDEV_MAJOR, 0);
|
|
cdevsw_add(&dev,&tw_cdevsw, NULL);
|
|
tw_devsw_installed = 1;
|
|
}
|
|
}
|
|
|
|
SYSINIT(twdev,SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,tw_drvinit,NULL)
|
|
|
|
|
|
#endif NTW
|