freebsd-dev/sys/dev/snc/if_sncreg.h
Yoshihiro Takahashi 0a917604f0 Added NEC PC-9801-83, 84, PC-9801-103, 104, PC-9801N-25 and PC-9801N-J02R
support which use National Semiconductor DP8393X (SONIC) as ethernet
controller. Currently, this driver is used on only PC-98.

Submitted by:	Motomichi Matsuzaki <mzaki@e-mail.ne.jp>
Obtained from:	NetBSD/pc98
2000-10-02 14:27:20 +00:00

141 lines
5.1 KiB
C

/* $FreeBSD$ */
/* $NecBSD: if_snreg.h,v 1.3 1999/01/24 01:39:52 kmatsuda Exp $ */
/* $NetBSD$ */
/*
* Copyright (c) 1997, 1998, 1999
* Kouichi Matsuda. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by Kouichi Matsuda for
* NetBSD/pc98.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Modified for NetBSD/pc98 1.2.1 from NetBSD/mac68k 1.2D by Kouichi Matsuda.
* Make adapted for NEC PC-9801-83, 84, PC-9801-103, 104, PC-9801N-25 and
* PC-9801N-J02R, which uses National Semiconductor DP83934AVQB as
* Ethernet Controller and National Semiconductor NS46C46 as (64 * 16 bits)
* Microwire Serial EEPROM.
*/
/*
* XXX: Should not be HERE. (Should be shared with...)
*/
/*
* NEC/SONIC port mappings, offset from iobase.
*/
#define SNEC_CTRL 0 /* SONIC control port (word) */
#define SNEC_CTRLB 1 /* NEC/SONIC control port (byte) */
#define SNEC_RSVD0 2 /* not used */
#define SNEC_ADDR 3 /* SONIC, NEC/SONIC register address set port */
#define SNEC_RSVD1 4 /* not used */
#define SNEC_RSVD2 5 /* not used */
#define SNEC_NREGS 6
/* bank memory size */
#define SNEC_NMEMS (NBPG * 2)
/* how many bank */
#define SNEC_NBANK 0x10
/* internal buffer size */
#define SNEC_NBUF (SNEC_NMEMS * SNEC_NBANK)
/*
* NEC/SONIC specific internal registers.
*/
/*
* Memory Bank Select Register (MEMBS)
*/
#define SNECR_MEMBS 0x80
#define SNECR_MEMBS_BSEN 0x01 /* enable memory bank select */
#define SNECR_MEMBS_EBNMSK 0x1c /* encoded bank select number */
/* Translate bank number to encoded bank select number. */
#define SNECR_MEMBS_B2EB(bank) (bank << 2)
#define SNECR_MEMBS_PCMCIABUS 0x80 /* bus type identification */
/*
* Memory Base Address Select Register (MEMSEL)
*/
#define SNECR_MEMSEL 0x82
/* Translate base phys address to encoded select number. */
#define SNECR_MEMSEL_PHYS2EN(maddr) ((maddr >> 13) & 0x0f)
/*
* Encoded Irq Select Register (IRQSEL)
*/
#define SNECR_IRQSEL 0x84
/*
* EEPROM Access Register (EEP)
*/
#define SNECR_EEP 0x86
#define SNECR_EEP_DI 0x10 /* EEPROM Serial Data Input (high) */
#define SNECR_EEP_CS 0x20 /* EEPROM Chip Select (high) */
#define SNECR_EEP_SK 0x40 /* EEPROM Serial Data Clock (high) */
#define SNECR_EEP_DO 0x80 /* EEPROM Serial Data Output (high) */
/* EEPROM data locations */
#define SNEC_EEPROM_KEY0 6 /* Station Address Check Sum Key #1 */
#define SNEC_EEPROM_KEY1 7 /* Station Address Check Sum Key #2 */
#define SNEC_EEPROM_SA0 8 /* Station Address #1 */
#define SNEC_EEPROM_SA1 9 /* Station Address #2 */
#define SNEC_EEPROM_SA2 10 /* Station Address #3 */
#define SNEC_EEPROM_SA3 11 /* Station Address #4 */
#define SNEC_EEPROM_SA4 12 /* Station Address #5 */
#define SNEC_EEPROM_SA5 13 /* Station Address #6 */
#define SNEC_EEPROM_CKSUM 14 /* Station Address Check Sum */
#define SNEC_EEPROM_SIZE 32 /* valid EEPROM data (max 128 bytes) */
/*
* Bus and Mode Identification Register (IDENT)
*/
#define SNECR_IDENT 0x88
/* Bit 0: Bus Identification. */
#define SNECR_IDENT_CBUS 0x01 /* on PC-98 C-Bus */
#define SNECR_IDENT_PCMCIABUS 0x00 /* on PCMCIA Bus */
/* Bit 2: always 1 */
#define SNECR_IDENT_MAGIC 0x04
/* Bit 4: Bus Configuration Mode Identification. */
#define SNECR_IDENT_PNP 0x10 /* Plug and Play (C-Bus and PCMCIA) */
#define SNECR_IDENT_LEGACY 0x00 /* Legacy C-Bus */
#define SNECR_IDENT_LEGACY_CBUS \
(SNECR_IDENT_LEGACY | SNECR_IDENT_MAGIC | SNECR_IDENT_CBUS)
#define SNECR_IDENT_PNP_CBUS \
(SNECR_IDENT_PNP | SNECR_IDENT_MAGIC | SNECR_IDENT_CBUS)
#define SNECR_IDENT_PNP_PCMCIABUS \
(SNECR_IDENT_PNP | SNECR_IDENT_MAGIC | SNECR_IDENT_PCMCIABUS)
/*
* XXX: parent bus type aliases
*/
#define SNEC_TYPE_LEGACY 0
#define SNEC_TYPE_PNP 1