freebsd-dev/sys/mips/mediatek/mtk_soc.c
Stanislav Galabov ef4e6c8fe8 Fix access to cpu_model[] in mtk_soc_set_cpu_model()
There may be cases where cpu_model[] may not be 32bit aligned, so it is
better to not try to access it as such in order to avoid unaligned access.

Sponsored by:	Smartcom - Bulgaria AD
2018-11-19 06:48:48 +00:00

511 lines
12 KiB
C

/*-
* Copyright (c) 2016 Stanislav Galabov.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/rman.h>
#include <machine/fdt.h>
#include <dev/ofw/openfirm.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/fdt/fdt_common.h>
#include <dev/fdt/fdt_clock.h>
#include <mips/mediatek/fdt_reset.h>
#include <mips/mediatek/mtk_sysctl.h>
#include <mips/mediatek/mtk_soc.h>
static uint32_t mtk_soc_socid = MTK_SOC_UNKNOWN;
static uint32_t mtk_soc_uartclk = 0;
static uint32_t mtk_soc_cpuclk = MTK_CPU_CLK_880MHZ;
static uint32_t mtk_soc_timerclk = MTK_CPU_CLK_880MHZ / 2;
static uint32_t mtk_soc_chipid0_3 = MTK_UNKNOWN_CHIPID0_3;
static uint32_t mtk_soc_chipid4_7 = MTK_UNKNOWN_CHIPID4_7;
static const struct ofw_compat_data compat_data[] = {
{ "ralink,rt2880-soc", MTK_SOC_RT2880 },
{ "ralink,rt3050-soc", MTK_SOC_RT3050 },
{ "ralink,rt3052-soc", MTK_SOC_RT3052 },
{ "ralink,rt3350-soc", MTK_SOC_RT3350 },
{ "ralink,rt3352-soc", MTK_SOC_RT3352 },
{ "ralink,rt3662-soc", MTK_SOC_RT3662 },
{ "ralink,rt3883-soc", MTK_SOC_RT3883 },
{ "ralink,rt5350-soc", MTK_SOC_RT5350 },
{ "ralink,mtk7620a-soc", MTK_SOC_MT7620A },
{ "ralink,mt7620a-soc", MTK_SOC_MT7620A },
{ "ralink,mtk7620n-soc", MTK_SOC_MT7620N },
{ "ralink,mt7620n-soc", MTK_SOC_MT7620N },
{ "mediatek,mtk7621-soc", MTK_SOC_MT7621 },
{ "mediatek,mt7621-soc", MTK_SOC_MT7621 },
{ "ralink,mt7621-soc", MTK_SOC_MT7621 },
{ "ralink,mtk7621-soc", MTK_SOC_MT7621 },
{ "ralink,mtk7628an-soc", MTK_SOC_MT7628 },
{ "mediatek,mt7628an-soc", MTK_SOC_MT7628 },
{ "ralink,mtk7688-soc", MTK_SOC_MT7688 },
/* Sentinel */
{ NULL, MTK_SOC_UNKNOWN },
};
static uint32_t
mtk_detect_cpuclk_rt2880(bus_space_tag_t bst, bus_space_handle_t bsh)
{
uint32_t val;
val = bus_space_read_4(bst, bsh, SYSCTL_SYSCFG);
val >>= RT2880_CPU_CLKSEL_OFF;
val &= RT2880_CPU_CLKSEL_MSK;
switch (val) {
case 0:
return (MTK_CPU_CLK_250MHZ);
case 1:
return (MTK_CPU_CLK_266MHZ);
case 2:
return (MTK_CPU_CLK_280MHZ);
case 3:
return (MTK_CPU_CLK_300MHZ);
}
/* Never reached */
return (0);
}
static uint32_t
mtk_detect_cpuclk_rt305x(bus_space_tag_t bst, bus_space_handle_t bsh)
{
uint32_t val;
val = bus_space_read_4(bst, bsh, SYSCTL_CHIPID0_3);
if (val == RT3350_CHIPID0_3)
return (MTK_CPU_CLK_320MHZ);
val = bus_space_read_4(bst, bsh, SYSCTL_SYSCFG);
val >>= RT305X_CPU_CLKSEL_OFF;
val &= RT305X_CPU_CLKSEL_MSK;
return ((val == 0) ? MTK_CPU_CLK_320MHZ : MTK_CPU_CLK_384MHZ);
}
static uint32_t
mtk_detect_cpuclk_rt3352(bus_space_tag_t bst, bus_space_handle_t bsh)
{
uint32_t val;
val = bus_space_read_4(bst, bsh, SYSCTL_SYSCFG);
val >>= RT3352_CPU_CLKSEL_OFF;
val &= RT3352_CPU_CLKSEL_MSK;
if (val)
return (MTK_CPU_CLK_400MHZ);
return (MTK_CPU_CLK_384MHZ);
}
static uint32_t
mtk_detect_cpuclk_rt3883(bus_space_tag_t bst, bus_space_handle_t bsh)
{
uint32_t val;
val = bus_space_read_4(bst, bsh, SYSCTL_SYSCFG);
val >>= RT3883_CPU_CLKSEL_OFF;
val &= RT3883_CPU_CLKSEL_MSK;
switch (val) {
case 0:
return (MTK_CPU_CLK_250MHZ);
case 1:
return (MTK_CPU_CLK_384MHZ);
case 2:
return (MTK_CPU_CLK_480MHZ);
case 3:
return (MTK_CPU_CLK_500MHZ);
}
/* Never reached */
return (0);
}
static uint32_t
mtk_detect_cpuclk_rt5350(bus_space_tag_t bst, bus_space_handle_t bsh)
{
uint32_t val1, val2;
val1 = val2 = bus_space_read_4(bst, bsh, SYSCTL_SYSCFG);
val1 >>= RT5350_CPU_CLKSEL_OFF1;
val2 >>= RT5350_CPU_CLKSEL_OFF2;
val1 &= RT5350_CPU_CLKSEL_MSK;
val2 &= RT5350_CPU_CLKSEL_MSK;
val1 |= (val2 << 1);
switch (val1) {
case 0:
return (MTK_CPU_CLK_360MHZ);
case 1:
/* Reserved value, but we return UNKNOWN */
return (MTK_CPU_CLK_UNKNOWN);
case 2:
return (MTK_CPU_CLK_320MHZ);
case 3:
return (MTK_CPU_CLK_300MHZ);
}
/* Never reached */
return (0);
}
static uint32_t
mtk_detect_cpuclk_mt7620(bus_space_tag_t bst, bus_space_handle_t bsh)
{
uint32_t val, mul, div, res;
val = bus_space_read_4(bst, bsh, SYSCTL_MT7620_CPLL_CFG1);
if (val & MT7620_CPU_CLK_AUX0)
return (MTK_CPU_CLK_480MHZ);
val = bus_space_read_4(bst, bsh, SYSCTL_MT7620_CPLL_CFG0);
if (!(val & MT7620_CPLL_SW_CFG))
return (MTK_CPU_CLK_600MHZ);
mul = MT7620_PLL_MULT_RATIO_BASE + ((val >> MT7620_PLL_MULT_RATIO_OFF) &
MT7620_PLL_MULT_RATIO_MSK);
div = (val >> MT7620_PLL_DIV_RATIO_OFF) & MT7620_PLL_DIV_RATIO_MSK;
if (div != MT7620_PLL_DIV_RATIO_MSK)
div += MT7620_PLL_DIV_RATIO_BASE;
else
div = MT7620_PLL_DIV_RATIO_MAX;
res = (MT7620_XTAL_40 * mul) / div;
return (MTK_MHZ(res));
}
static uint32_t
mtk_detect_cpuclk_mt7621(bus_space_tag_t bst, bus_space_handle_t bsh)
{
uint32_t val, div, res;
val = bus_space_read_4(bst, bsh, SYSCTL_CLKCFG0);
if (val & MT7621_USES_MEMDIV) {
div = bus_space_read_4(bst, bsh, MTK_MT7621_CLKDIV_REG);
div >>= MT7621_MEMDIV_OFF;
div &= MT7621_MEMDIV_MSK;
div += MT7621_MEMDIV_BASE;
val = bus_space_read_4(bst, bsh, SYSCTL_SYSCFG);
val >>= MT7621_CLKSEL_OFF;
val &= MT7621_CLKSEL_MSK;
if (val >= MT7621_CLKSEL_25MHZ_VAL)
res = div * MT7621_CLKSEL_25MHZ;
else if (val >= MT7621_CLKSEL_20MHZ_VAL)
res = div * MT7621_CLKSEL_20MHZ;
else
res = div * 0; /* XXX: not sure about this */
} else {
val = bus_space_read_4(bst, bsh, SYSCTL_CUR_CLK_STS);
div = (val >> MT7621_CLK_STS_DIV_OFF) & MT7621_CLK_STS_MSK;
val &= MT7621_CLK_STS_MSK;
res = (MT7621_CLK_STS_BASE * val) / div;
}
return (MTK_MHZ(res));
}
static uint32_t
mtk_detect_cpuclk_mt7628(bus_space_tag_t bst, bus_space_handle_t bsh)
{
uint32_t val;
val = bus_space_read_4(bst, bsh, SYSCTL_SYSCFG);
val >>= MT7628_CPU_CLKSEL_OFF;
val &= MT7628_CPU_CLKSEL_MSK;
if (val)
return (MTK_CPU_CLK_580MHZ);
return (MTK_CPU_CLK_575MHZ);
}
void
mtk_soc_try_early_detect(void)
{
bus_space_tag_t bst;
bus_space_handle_t bsh;
uint32_t base;
phandle_t node;
int i;
if ((node = OF_finddevice("/")) == -1)
return;
for (i = 0; compat_data[i].ocd_str != NULL; i++) {
if (ofw_bus_node_is_compatible(node, compat_data[i].ocd_str)) {
mtk_soc_socid = compat_data[i].ocd_data;
break;
}
}
if (mtk_soc_socid == MTK_SOC_UNKNOWN) {
/* We don't know the SoC, so we don't know how to get clocks */
return;
}
bst = fdtbus_bs_tag;
if (mtk_soc_socid == MTK_SOC_RT2880)
base = MTK_RT2880_BASE;
else if (mtk_soc_socid == MTK_SOC_MT7621)
base = MTK_MT7621_BASE;
else
base = MTK_DEFAULT_BASE;
if (bus_space_map(bst, base, MTK_DEFAULT_SIZE, 0, &bsh))
return;
/* Get our CHIP ID */
mtk_soc_chipid0_3 = bus_space_read_4(bst, bsh, SYSCTL_CHIPID0_3);
mtk_soc_chipid4_7 = bus_space_read_4(bst, bsh, SYSCTL_CHIPID4_7);
/* First, figure out the CPU clock */
switch (mtk_soc_socid) {
case MTK_SOC_RT2880:
mtk_soc_cpuclk = mtk_detect_cpuclk_rt2880(bst, bsh);
break;
case MTK_SOC_RT3050: /* fallthrough */
case MTK_SOC_RT3052:
case MTK_SOC_RT3350:
mtk_soc_cpuclk = mtk_detect_cpuclk_rt305x(bst, bsh);
break;
case MTK_SOC_RT3352:
mtk_soc_cpuclk = mtk_detect_cpuclk_rt3352(bst, bsh);
break;
case MTK_SOC_RT3662: /* fallthrough */
case MTK_SOC_RT3883:
mtk_soc_cpuclk = mtk_detect_cpuclk_rt3883(bst, bsh);
break;
case MTK_SOC_RT5350:
mtk_soc_cpuclk = mtk_detect_cpuclk_rt5350(bst, bsh);
break;
case MTK_SOC_MT7620A: /* fallthrough */
case MTK_SOC_MT7620N:
mtk_soc_cpuclk = mtk_detect_cpuclk_mt7620(bst, bsh);
break;
case MTK_SOC_MT7621:
mtk_soc_cpuclk = mtk_detect_cpuclk_mt7621(bst, bsh);
break;
case MTK_SOC_MT7628: /* fallthrough */
case MTK_SOC_MT7688:
mtk_soc_cpuclk = mtk_detect_cpuclk_mt7628(bst, bsh);
break;
default:
/* We don't know the SoC, so we can't find the CPU clock */
break;
}
/* Now figure out the timer clock */
if (mtk_soc_socid == MTK_SOC_MT7621) {
#ifdef notyet
/*
* We use the GIC timer for timing source and its clock freq is
* the same as the CPU's clock freq
*/
mtk_soc_timerclk = mtk_soc_cpuclk;
#else
/*
* When GIC timer and MIPS timer are ready to co-exist and
* GIC timer is actually implemented, we need to switch to it.
* Until then we use a fake GIC timer, which is actually a
* normal MIPS ticker, so the timer clock is half the CPU clock
*/
mtk_soc_timerclk = mtk_soc_cpuclk / 2;
#endif
} else {
/*
* We use the MIPS ticker for the rest for now, so
* the CPU clock is divided by 2
*/
mtk_soc_timerclk = mtk_soc_cpuclk / 2;
}
switch (mtk_soc_socid) {
case MTK_SOC_RT2880:
mtk_soc_uartclk = mtk_soc_cpuclk / MTK_UARTDIV_2;
break;
case MTK_SOC_RT3350: /* fallthrough */
case MTK_SOC_RT3050: /* fallthrough */
case MTK_SOC_RT3052:
/* UART clock is CPU clock / 3 */
mtk_soc_uartclk = mtk_soc_cpuclk / MTK_UARTDIV_3;
break;
case MTK_SOC_RT3352: /* fallthrough */
case MTK_SOC_RT3662: /* fallthrough */
case MTK_SOC_RT3883: /* fallthrough */
case MTK_SOC_RT5350: /* fallthrough */
case MTK_SOC_MT7620A: /* fallthrough */
case MTK_SOC_MT7620N: /* fallthrough */
case MTK_SOC_MT7628: /* fallthrough */
case MTK_SOC_MT7688:
/* UART clock is always 40MHz */
mtk_soc_uartclk = MTK_UART_CLK_40MHZ;
break;
case MTK_SOC_MT7621:
/* UART clock is always 50MHz */
mtk_soc_uartclk = MTK_UART_CLK_50MHZ;
break;
default:
/* We don't know the SoC, so we don't know the UART clock */
break;
}
bus_space_unmap(bst, bsh, MTK_DEFAULT_SIZE);
}
extern char cpu_model[];
void
mtk_soc_set_cpu_model(void)
{
int idx, offset = sizeof(mtk_soc_chipid0_3);
char *chipid0_3 = (char *)(&mtk_soc_chipid0_3);
char *chipid4_7 = (char *)(&mtk_soc_chipid4_7);
/*
* CHIPID is always 2x32 bit registers, containing the ASCII
* representation of the chip, so use that directly.
*
* The info is either pre-populated in mtk_soc_try_early_detect() or
* it is left at its default value of "unknown " if it could not be
* obtained for some reason.
*/
for (idx = 0; idx < offset; idx++) {
cpu_model[idx] = chipid0_3[idx];
cpu_model[idx + offset] = chipid4_7[idx];
}
/* Null-terminate the string */
cpu_model[2 * offset] = 0;
}
uint32_t
mtk_soc_get_uartclk(void)
{
return mtk_soc_uartclk;
}
uint32_t
mtk_soc_get_cpuclk(void)
{
return mtk_soc_cpuclk;
}
uint32_t
mtk_soc_get_timerclk(void)
{
return mtk_soc_timerclk;
}
uint32_t
mtk_soc_get_socid(void)
{
return mtk_soc_socid;
}
/*
* The following are generic reset and clock functions
*/
/* Default reset time is 100ms */
#define DEFAULT_RESET_TIME 100000
int
mtk_soc_reset_device(device_t dev)
{
int res;
res = fdt_reset_assert_all(dev);
if (res == 0) {
DELAY(DEFAULT_RESET_TIME);
res = fdt_reset_deassert_all(dev);
if (res == 0)
DELAY(DEFAULT_RESET_TIME);
}
return (res);
}
int
mtk_soc_stop_clock(device_t dev)
{
return (fdt_clock_disable_all(dev));
}
int
mtk_soc_start_clock(device_t dev)
{
return (fdt_clock_enable_all(dev));
}
int
mtk_soc_assert_reset(device_t dev)
{
return (fdt_reset_assert_all(dev));
}
int
mtk_soc_deassert_reset(device_t dev)
{
return (fdt_reset_deassert_all(dev));
}
void
mtk_soc_reset(void)
{
mtk_sysctl_clr_set(SYSCTL_RSTCTRL, 0, 1);
mtk_sysctl_clr_set(SYSCTL_RSTCTRL, 1, 0);
}