freebsd-dev/sys/pci
Jeroen Ruigrok van der Werven 3759e79c20 Document the 0x12258086 PCI id.
This is in fact an Intel Orion chipset (82454KX/GX) which has been used
in HP NetServer's LS4 range.
HP Probably relabeled the DID.  That's the only explanation I can find
plausible to this `mystery'.
2000-07-27 09:54:50 +00:00
..
agp_ali.c
agp_amd.c
agp_i810.c
agp_if.m
agp_intel.c
agp_sis.c
agp_via.c
agp.c
agppriv.h
agpreg.h
agpvar.h
alpm.c
amd.c
amd.h
cy_pci.c
cy_pcireg.h
dc21040reg.h
ide_pcireg.h
if_ar_p.c
if_dc.c Add the PCI IDs for the Macronix 98727 and 98732 parts. These are 2000-07-17 19:27:41 +00:00
if_dcreg.h Add the PCI IDs for the Macronix 98727 and 98732 parts. These are 2000-07-17 19:27:41 +00:00
if_de.c Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
if_devar.h
if_en_pci.c
if_fxp.c Fix an alpha-only race which causes the transmit side of the chip to 2000-07-19 14:33:52 +00:00
if_fxpreg.h
if_fxpvar.h
if_mn.c
if_rl.c Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
if_rlreg.h
if_sf.c Close PR# 19904: remember to call sf_setmulti() when initializing the 2000-07-14 19:11:02 +00:00
if_sfreg.h
if_sis.c sis_miibus_writereg() was checking for SIS_TYPE_900 and phy != 0 twice 2000-07-14 05:30:48 +00:00
if_sisreg.h
if_sk.c Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
if_skreg.h
if_sr_p.c
if_ste.c Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
if_stereg.h
if_ti.c Tweak probe message so that 1000baseSX and 1000baseT cards are 2000-07-20 23:43:45 +00:00
if_tireg.h Update the Tigon driver to support 1000baseTX gigE over copper AceNIC 2000-07-20 22:24:43 +00:00
if_tl.c Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
if_tlreg.h
if_tx.c Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
if_txvar.h
if_vr.c Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
if_vrreg.h
if_wb.c Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
if_wbreg.h
if_wx.c Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
if_wxreg.h
if_wxvar.h
if_xl.c Make all Ethernet drivers attach using ether_ifattach() and detach using 2000-07-13 22:54:34 +00:00
if_xlreg.h
intpm.c
intpmreg.h
isp_pci.c Keep interrupts blocked for all of isp_pci_attach. Redo DMA routines 2000-07-18 06:40:22 +00:00
locate.pl
meteor_reg.h
meteor.c
ncr.c
ncrreg.h
ohci_pci.c
pccbb.c
pccbbreg.h
pccbbvar.h
pci_compat.c
pci_if.m
pci.c
pcic_p.c
pcic_p.h
pcireg.h
pcisupport.c Document the 0x12258086 PCI id. 2000-07-27 09:54:50 +00:00
pcivar.h
scsiiom.c
simos.c
simos.h
ti_fw2.h Use a custom Tigon 2 firmware image, hopefully temporarily. This is 2000-07-26 23:55:34 +00:00
ti_fw.h Update the Tigon driver to support 1000baseTX gigE over copper AceNIC 2000-07-20 22:24:43 +00:00
uhci_pci.c
xmaciireg.h
xrpu.c