d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c84bb70268
freebsd-dev/sys/dev/usb/usb_device.c
Hans Petter Selasky 64cb5e2a26 Resolve deadlock between device_detach() and usbd_do_request_flags() 
by reviving the SX control request lock and refining which lock
protects the common scratch area in "struct usb_device".

The SX control request lock was removed by r246759 because it caused a
lock order reversal with the USB enumeration lock inside
usbd_transfer_setup() as a function of r246616. It was thought that
reducing the number of locks would resolve the LOR, but because some
USB device drivers use usbd_do_request_flags() inside callback
functions, like in taskqueues, a deadlock may occur when these are
drained from device_detach(). By restoring the SX control request
lock usbd_do_request_flags() is allowed to complete its execution
when a USB device driver is detaching. By using the SX control request
lock to protect the scratch area, the LOR introduced by r246616 is
also resolved.

Bump the FreeBSD version while at it to force recompilation of all USB
kernel modules.

Found by:	avos@
MFC after:	1 week
2016-09-05 15:35:58 +00:00

2948 lines
74 KiB
C
Raw Blame History

/* $FreeBSD$ */
/*-
* Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifdef USB_GLOBAL_INCLUDE_FILE
#include USB_GLOBAL_INCLUDE_FILE
#else
#include <sys/stdint.h>
#include <sys/stddef.h>
#include <sys/param.h>
#include <sys/queue.h>
#include <sys/types.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/module.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/condvar.h>
#include <sys/sysctl.h>
#include <sys/sx.h>
#include <sys/unistd.h>
#include <sys/callout.h>
#include <sys/malloc.h>
#include <sys/priv.h>
#include <sys/conf.h>
#include <sys/fcntl.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usbdi_util.h>
#include <dev/usb/usb_ioctl.h>
#if USB_HAVE_UGEN
#include <sys/sbuf.h>
#endif
#include "usbdevs.h"
#define USB_DEBUG_VAR usb_debug
#include <dev/usb/usb_core.h>
#include <dev/usb/usb_debug.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/usb_device.h>
#include <dev/usb/usb_busdma.h>
#include <dev/usb/usb_transfer.h>
#include <dev/usb/usb_request.h>
#include <dev/usb/usb_dynamic.h>
#include <dev/usb/usb_hub.h>
#include <dev/usb/usb_util.h>
#include <dev/usb/usb_msctest.h>
#if USB_HAVE_UGEN
#include <dev/usb/usb_dev.h>
#include <dev/usb/usb_generic.h>
#endif
#include <dev/usb/quirk/usb_quirk.h>
#include <dev/usb/usb_controller.h>
#include <dev/usb/usb_bus.h>
#endif /* USB_GLOBAL_INCLUDE_FILE */
/* function prototypes */
static void usb_init_endpoint(struct usb_device *, uint8_t,
struct usb_endpoint_descriptor *,
struct usb_endpoint_ss_comp_descriptor *,
struct usb_endpoint *);
static void usb_unconfigure(struct usb_device *, uint8_t);
static void usb_detach_device_sub(struct usb_device *, device_t *,
char **, uint8_t);
static uint8_t usb_probe_and_attach_sub(struct usb_device *,
struct usb_attach_arg *);
static void usb_init_attach_arg(struct usb_device *,
struct usb_attach_arg *);
static void usb_suspend_resume_sub(struct usb_device *, device_t,
uint8_t);
static usb_proc_callback_t usbd_clear_stall_proc;
static usb_error_t usb_config_parse(struct usb_device *, uint8_t, uint8_t);
static void usbd_set_device_strings(struct usb_device *);
#if USB_HAVE_DEVCTL
static void usb_notify_addq(const char *type, struct usb_device *);
#endif
#if USB_HAVE_UGEN
static void usb_fifo_free_wrap(struct usb_device *, uint8_t, uint8_t);
static void usb_cdev_create(struct usb_device *);
static void usb_cdev_free(struct usb_device *);
#endif
/* This variable is global to allow easy access to it: */
#ifdef USB_TEMPLATE
int usb_template = USB_TEMPLATE;
#else
int usb_template;
#endif
SYSCTL_INT(_hw_usb, OID_AUTO, template, CTLFLAG_RWTUN,
&usb_template, 0, "Selected USB device side template");
/* English is default language */
static int usb_lang_id = 0x0009;
static int usb_lang_mask = 0x00FF;
SYSCTL_INT(_hw_usb, OID_AUTO, usb_lang_id, CTLFLAG_RWTUN,
&usb_lang_id, 0, "Preferred USB language ID");
SYSCTL_INT(_hw_usb, OID_AUTO, usb_lang_mask, CTLFLAG_RWTUN,
&usb_lang_mask, 0, "Preferred USB language mask");
static const char* statestr[USB_STATE_MAX] = {
[USB_STATE_DETACHED] = "DETACHED",
[USB_STATE_ATTACHED] = "ATTACHED",
[USB_STATE_POWERED] = "POWERED",
[USB_STATE_ADDRESSED] = "ADDRESSED",
[USB_STATE_CONFIGURED] = "CONFIGURED",
};
const char *
usb_statestr(enum usb_dev_state state)
{
return ((state < USB_STATE_MAX) ? statestr[state] : "UNKNOWN");
}
const char *
usb_get_manufacturer(struct usb_device *udev)
{
return (udev->manufacturer ? udev->manufacturer : "Unknown");
}
const char *
usb_get_product(struct usb_device *udev)
{
return (udev->product ? udev->product : "");
}
const char *
usb_get_serial(struct usb_device *udev)
{
return (udev->serial ? udev->serial : "");
}
/*------------------------------------------------------------------------*
* usbd_get_ep_by_addr
*
* This function searches for an USB ep by endpoint address and
* direction.
*
* Returns:
* NULL: Failure
* Else: Success
*------------------------------------------------------------------------*/
struct usb_endpoint *
usbd_get_ep_by_addr(struct usb_device *udev, uint8_t ea_val)
{
struct usb_endpoint *ep = udev->endpoints;
struct usb_endpoint *ep_end = udev->endpoints + udev->endpoints_max;
enum {
EA_MASK = (UE_DIR_IN | UE_DIR_OUT | UE_ADDR),
};
/*
* According to the USB specification not all bits are used
* for the endpoint address. Keep defined bits only:
*/
ea_val &= EA_MASK;
/*
* Iterate across all the USB endpoints searching for a match
* based on the endpoint address:
*/
for (; ep != ep_end; ep++) {
if (ep->edesc == NULL) {
continue;
}
/* do the mask and check the value */
if ((ep->edesc->bEndpointAddress & EA_MASK) == ea_val) {
goto found;
}
}
/*
* The default endpoint is always present and is checked separately:
*/
if ((udev->ctrl_ep.edesc != NULL) &&
((udev->ctrl_ep.edesc->bEndpointAddress & EA_MASK) == ea_val)) {
ep = &udev->ctrl_ep;
goto found;
}
return (NULL);
found:
return (ep);
}
/*------------------------------------------------------------------------*
* usbd_get_endpoint
*
* This function searches for an USB endpoint based on the information
* given by the passed "struct usb_config" pointer.
*
* Return values:
* NULL: No match.
* Else: Pointer to "struct usb_endpoint".
*------------------------------------------------------------------------*/
struct usb_endpoint *
usbd_get_endpoint(struct usb_device *udev, uint8_t iface_index,
const struct usb_config *setup)
{
struct usb_endpoint *ep = udev->endpoints;
struct usb_endpoint *ep_end = udev->endpoints + udev->endpoints_max;
uint8_t index = setup->ep_index;
uint8_t ea_mask;
uint8_t ea_val;
uint8_t type_mask;
uint8_t type_val;
DPRINTFN(10, "udev=%p iface_index=%d address=0x%x "
"type=0x%x dir=0x%x index=%d\n",
udev, iface_index, setup->endpoint,
setup->type, setup->direction, setup->ep_index);
/* check USB mode */
if (setup->usb_mode != USB_MODE_DUAL &&
udev->flags.usb_mode != setup->usb_mode) {
/* wrong mode - no endpoint */
return (NULL);
}
/* setup expected endpoint direction mask and value */
if (setup->direction == UE_DIR_RX) {
ea_mask = (UE_DIR_IN | UE_DIR_OUT);
ea_val = (udev->flags.usb_mode == USB_MODE_DEVICE) ?
UE_DIR_OUT : UE_DIR_IN;
} else if (setup->direction == UE_DIR_TX) {
ea_mask = (UE_DIR_IN | UE_DIR_OUT);
ea_val = (udev->flags.usb_mode == USB_MODE_DEVICE) ?
UE_DIR_IN : UE_DIR_OUT;
} else if (setup->direction == UE_DIR_ANY) {
/* match any endpoint direction */
ea_mask = 0;
ea_val = 0;
} else {
/* match the given endpoint direction */
ea_mask = (UE_DIR_IN | UE_DIR_OUT);
ea_val = (setup->direction & (UE_DIR_IN | UE_DIR_OUT));
}
/* setup expected endpoint address */
if (setup->endpoint == UE_ADDR_ANY) {
/* match any endpoint address */
} else {
/* match the given endpoint address */
ea_mask |= UE_ADDR;
ea_val |= (setup->endpoint & UE_ADDR);
}
/* setup expected endpoint type */
if (setup->type == UE_BULK_INTR) {
/* this will match BULK and INTERRUPT endpoints */
type_mask = 2;
type_val = 2;
} else if (setup->type == UE_TYPE_ANY) {
/* match any endpoint type */
type_mask = 0;
type_val = 0;
} else {
/* match the given endpoint type */
type_mask = UE_XFERTYPE;
type_val = (setup->type & UE_XFERTYPE);
}
/*
* Iterate across all the USB endpoints searching for a match
* based on the endpoint address. Note that we are searching
* the endpoints from the beginning of the "udev->endpoints" array.
*/
for (; ep != ep_end; ep++) {
if ((ep->edesc == NULL) ||
(ep->iface_index != iface_index)) {
continue;
}
/* do the masks and check the values */
if (((ep->edesc->bEndpointAddress & ea_mask) == ea_val) &&
((ep->edesc->bmAttributes & type_mask) == type_val)) {
if (!index--) {
goto found;
}
}
}
/*
* Match against default endpoint last, so that "any endpoint", "any
* address" and "any direction" returns the first endpoint of the
* interface. "iface_index" and "direction" is ignored:
*/
if ((udev->ctrl_ep.edesc != NULL) &&
((udev->ctrl_ep.edesc->bEndpointAddress & ea_mask) == ea_val) &&
((udev->ctrl_ep.edesc->bmAttributes & type_mask) == type_val) &&
(!index)) {
ep = &udev->ctrl_ep;
goto found;
}
return (NULL);
found:
return (ep);
}
/*------------------------------------------------------------------------*
* usbd_interface_count
*
* This function stores the number of USB interfaces excluding
* alternate settings, which the USB config descriptor reports into
* the unsigned 8-bit integer pointed to by "count".
*
* Returns:
* 0: Success
* Else: Failure
*------------------------------------------------------------------------*/
usb_error_t
usbd_interface_count(struct usb_device *udev, uint8_t *count)
{
if (udev->cdesc == NULL) {
*count = 0;
return (USB_ERR_NOT_CONFIGURED);
}
*count = udev->ifaces_max;
return (USB_ERR_NORMAL_COMPLETION);
}
/*------------------------------------------------------------------------*
* usb_init_endpoint
*
* This function will initialise the USB endpoint structure pointed to by
* the "endpoint" argument. The structure pointed to by "endpoint" must be
* zeroed before calling this function.
*------------------------------------------------------------------------*/
static void
usb_init_endpoint(struct usb_device *udev, uint8_t iface_index,
struct usb_endpoint_descriptor *edesc,
struct usb_endpoint_ss_comp_descriptor *ecomp,
struct usb_endpoint *ep)
{
const struct usb_bus_methods *methods;
usb_stream_t x;
methods = udev->bus->methods;
(methods->endpoint_init) (udev, edesc, ep);
/* initialise USB endpoint structure */
ep->edesc = edesc;
ep->ecomp = ecomp;
ep->iface_index = iface_index;
/* setup USB stream queues */
for (x = 0; x != USB_MAX_EP_STREAMS; x++) {
TAILQ_INIT(&ep->endpoint_q[x].head);
ep->endpoint_q[x].command = &usbd_pipe_start;
}
/* the pipe is not supported by the hardware */
if (ep->methods == NULL)
return;
/* check for SUPER-speed streams mode endpoint */
if (udev->speed == USB_SPEED_SUPER && ecomp != NULL &&
(edesc->bmAttributes & UE_XFERTYPE) == UE_BULK &&
(UE_GET_BULK_STREAMS(ecomp->bmAttributes) != 0)) {
usbd_set_endpoint_mode(udev, ep, USB_EP_MODE_STREAMS);
} else {
usbd_set_endpoint_mode(udev, ep, USB_EP_MODE_DEFAULT);
}
/* clear stall, if any */
if (methods->clear_stall != NULL) {
USB_BUS_LOCK(udev->bus);
(methods->clear_stall) (udev, ep);
USB_BUS_UNLOCK(udev->bus);
}
}
/*-----------------------------------------------------------------------*
* usb_endpoint_foreach
*
* This function will iterate all the USB endpoints except the control
* endpoint. This function is NULL safe.
*
* Return values:
* NULL: End of USB endpoints
* Else: Pointer to next USB endpoint
*------------------------------------------------------------------------*/
struct usb_endpoint *
usb_endpoint_foreach(struct usb_device *udev, struct usb_endpoint *ep)
{
struct usb_endpoint *ep_end;
/* be NULL safe */
if (udev == NULL)
return (NULL);
ep_end = udev->endpoints + udev->endpoints_max;
/* get next endpoint */
if (ep == NULL)
ep = udev->endpoints;
else
ep++;
/* find next allocated ep */
while (ep != ep_end) {
if (ep->edesc != NULL)
return (ep);
ep++;
}
return (NULL);
}
/*------------------------------------------------------------------------*
* usb_wait_pending_refs
*
* This function will wait for any USB references to go away before
* returning. This function is used before freeing a USB device.
*------------------------------------------------------------------------*/
static void
usb_wait_pending_refs(struct usb_device *udev)
{
#if USB_HAVE_UGEN
DPRINTF("Refcount = %d\n", (int)udev->refcount);
mtx_lock(&usb_ref_lock);
udev->refcount--;
while (1) {
/* wait for any pending references to go away */
if (udev->refcount == 0) {
/* prevent further refs being taken, if any */
udev->refcount = USB_DEV_REF_MAX;
break;
}
cv_wait(&udev->ref_cv, &usb_ref_lock);
}
mtx_unlock(&usb_ref_lock);
#endif
}
/*------------------------------------------------------------------------*
* usb_unconfigure
*
* This function will free all USB interfaces and USB endpoints belonging
* to an USB device.
*
* Flag values, see "USB_UNCFG_FLAG_XXX".
*------------------------------------------------------------------------*/
static void
usb_unconfigure(struct usb_device *udev, uint8_t flag)
{
uint8_t do_unlock;
/* Prevent re-enumeration */
do_unlock = usbd_enum_lock(udev);
/* detach all interface drivers */
usb_detach_device(udev, USB_IFACE_INDEX_ANY, flag);
#if USB_HAVE_UGEN
/* free all FIFOs except control endpoint FIFOs */
usb_fifo_free_wrap(udev, USB_IFACE_INDEX_ANY, flag);
/*
* Free all cdev's, if any.
*/
usb_cdev_free(udev);
#endif
#if USB_HAVE_COMPAT_LINUX
/* free Linux compat device, if any */
if (udev->linux_endpoint_start != NULL) {
usb_linux_free_device_p(udev);
udev->linux_endpoint_start = NULL;
}
#endif
usb_config_parse(udev, USB_IFACE_INDEX_ANY, USB_CFG_FREE);
/* free "cdesc" after "ifaces" and "endpoints", if any */
if (udev->cdesc != NULL) {
if (udev->flags.usb_mode != USB_MODE_DEVICE)
usbd_free_config_desc(udev, udev->cdesc);
udev->cdesc = NULL;
}
/* set unconfigured state */
udev->curr_config_no = USB_UNCONFIG_NO;
udev->curr_config_index = USB_UNCONFIG_INDEX;
if (do_unlock)
usbd_enum_unlock(udev);
}
/*------------------------------------------------------------------------*
* usbd_set_config_index
*
* This function selects configuration by index, independent of the
* actual configuration number. This function should not be used by
* USB drivers.
*
* Returns:
* 0: Success
* Else: Failure
*------------------------------------------------------------------------*/
usb_error_t
usbd_set_config_index(struct usb_device *udev, uint8_t index)
{
struct usb_status ds;
struct usb_config_descriptor *cdp;
uint16_t power;
uint16_t max_power;
uint8_t selfpowered;
uint8_t do_unlock;
usb_error_t err;
DPRINTFN(6, "udev=%p index=%d\n", udev, index);
/* Prevent re-enumeration */
do_unlock = usbd_enum_lock(udev);
usb_unconfigure(udev, 0);
if (index == USB_UNCONFIG_INDEX) {
/*
* Leave unallocated when unconfiguring the
* device. "usb_unconfigure()" will also reset
* the current config number and index.
*/
err = usbd_req_set_config(udev, NULL, USB_UNCONFIG_NO);
if (udev->state == USB_STATE_CONFIGURED)
usb_set_device_state(udev, USB_STATE_ADDRESSED);
goto done;
}
/* get the full config descriptor */
if (udev->flags.usb_mode == USB_MODE_DEVICE) {
/* save some memory */
err = usbd_req_get_descriptor_ptr(udev, &cdp,
(UDESC_CONFIG << 8) | index);
} else {
/* normal request */
err = usbd_req_get_config_desc_full(udev,
NULL, &cdp, index);
}
if (err) {
goto done;
}
/* set the new config descriptor */
udev->cdesc = cdp;
/* Figure out if the device is self or bus powered. */
selfpowered = 0;
if ((!udev->flags.uq_bus_powered) &&
(cdp->bmAttributes & UC_SELF_POWERED) &&
(udev->flags.usb_mode == USB_MODE_HOST)) {
/* May be self powered. */
if (cdp->bmAttributes & UC_BUS_POWERED) {
/* Must ask device. */
err = usbd_req_get_device_status(udev, NULL, &ds);
if (err) {
DPRINTFN(0, "could not read "
"device status: %s\n",
usbd_errstr(err));
} else if (UGETW(ds.wStatus) & UDS_SELF_POWERED) {
selfpowered = 1;
}
DPRINTF("status=0x%04x \n",
UGETW(ds.wStatus));
} else
selfpowered = 1;
}
DPRINTF("udev=%p cdesc=%p (addr %d) cno=%d attr=0x%02x, "
"selfpowered=%d, power=%d\n",
udev, cdp,
udev->address, cdp->bConfigurationValue, cdp->bmAttributes,
selfpowered, cdp->bMaxPower * 2);
/* Check if we have enough power. */
power = cdp->bMaxPower * 2;
if (udev->parent_hub) {
max_power = udev->parent_hub->hub->portpower;
} else {
max_power = USB_MAX_POWER;
}
if (power > max_power) {
DPRINTFN(0, "power exceeded %d > %d\n", power, max_power);
err = USB_ERR_NO_POWER;
goto done;
}
/* Only update "self_powered" in USB Host Mode */
if (udev->flags.usb_mode == USB_MODE_HOST) {
udev->flags.self_powered = selfpowered;
}
udev->power = power;
udev->curr_config_no = cdp->bConfigurationValue;
udev->curr_config_index = index;
usb_set_device_state(udev, USB_STATE_CONFIGURED);
/* Set the actual configuration value. */
err = usbd_req_set_config(udev, NULL, cdp->bConfigurationValue);
if (err) {
goto done;
}
err = usb_config_parse(udev, USB_IFACE_INDEX_ANY, USB_CFG_ALLOC);
if (err) {
goto done;
}
err = usb_config_parse(udev, USB_IFACE_INDEX_ANY, USB_CFG_INIT);
if (err) {
goto done;
}
#if USB_HAVE_UGEN
/* create device nodes for each endpoint */
usb_cdev_create(udev);
#endif
done:
DPRINTF("error=%s\n", usbd_errstr(err));
if (err) {
usb_unconfigure(udev, 0);
}
if (do_unlock)
usbd_enum_unlock(udev);
return (err);
}
/*------------------------------------------------------------------------*
* usb_config_parse
*
* This function will allocate and free USB interfaces and USB endpoints,
* parse the USB configuration structure and initialise the USB endpoints
* and interfaces. If "iface_index" is not equal to
* "USB_IFACE_INDEX_ANY" then the "cmd" parameter is the
* alternate_setting to be selected for the given interface. Else the
* "cmd" parameter is defined by "USB_CFG_XXX". "iface_index" can be
* "USB_IFACE_INDEX_ANY" or a valid USB interface index. This function
* is typically called when setting the configuration or when setting
* an alternate interface.
*
* Returns:
* 0: Success
* Else: Failure
*------------------------------------------------------------------------*/
static usb_error_t
usb_config_parse(struct usb_device *udev, uint8_t iface_index, uint8_t cmd)
{
struct usb_idesc_parse_state ips;
struct usb_interface_descriptor *id;
struct usb_endpoint_descriptor *ed;
struct usb_interface *iface;
struct usb_endpoint *ep;
usb_error_t err;
uint8_t ep_curr;
uint8_t ep_max;
uint8_t temp;
uint8_t do_init;
uint8_t alt_index;
if (iface_index != USB_IFACE_INDEX_ANY) {
/* parameter overload */
alt_index = cmd;
cmd = USB_CFG_INIT;
} else {
/* not used */
alt_index = 0;
}
err = 0;
DPRINTFN(5, "iface_index=%d cmd=%d\n",
iface_index, cmd);
if (cmd == USB_CFG_FREE)
goto cleanup;
if (cmd == USB_CFG_INIT) {
sx_assert(&udev->enum_sx, SA_LOCKED);
/* check for in-use endpoints */
ep = udev->endpoints;
ep_max = udev->endpoints_max;
while (ep_max--) {
/* look for matching endpoints */
if ((iface_index == USB_IFACE_INDEX_ANY) ||
(iface_index == ep->iface_index)) {
if (ep->refcount_alloc != 0) {
/*
* This typically indicates a
* more serious error.
*/
err = USB_ERR_IN_USE;
} else {
/* reset endpoint */
memset(ep, 0, sizeof(*ep));
/* make sure we don't zero the endpoint again */
ep->iface_index = USB_IFACE_INDEX_ANY;
}
}
ep++;
}
if (err)
return (err);
}
memset(&ips, 0, sizeof(ips));
ep_curr = 0;
ep_max = 0;
while ((id = usb_idesc_foreach(udev->cdesc, &ips))) {
iface = udev->ifaces + ips.iface_index;
/* check for specific interface match */
if (cmd == USB_CFG_INIT) {
if ((iface_index != USB_IFACE_INDEX_ANY) &&
(iface_index != ips.iface_index)) {
/* wrong interface */
do_init = 0;
} else if (alt_index != ips.iface_index_alt) {
/* wrong alternate setting */
do_init = 0;
} else {
/* initialise interface */
do_init = 1;
}
} else
do_init = 0;
/* check for new interface */
if (ips.iface_index_alt == 0) {
/* update current number of endpoints */
ep_curr = ep_max;
}
/* check for init */
if (do_init) {
/* setup the USB interface structure */
iface->idesc = id;
/* set alternate index */
iface->alt_index = alt_index;
/* set default interface parent */
if (iface_index == USB_IFACE_INDEX_ANY) {
iface->parent_iface_index =
USB_IFACE_INDEX_ANY;
}
}
DPRINTFN(5, "found idesc nendpt=%d\n", id->bNumEndpoints);
ed = (struct usb_endpoint_descriptor *)id;
temp = ep_curr;
/* iterate all the endpoint descriptors */
while ((ed = usb_edesc_foreach(udev->cdesc, ed))) {
/* check if endpoint limit has been reached */
if (temp >= USB_MAX_EP_UNITS) {
DPRINTF("Endpoint limit reached\n");
break;
}
ep = udev->endpoints + temp;
if (do_init) {
void *ecomp;
ecomp = usb_ed_comp_foreach(udev->cdesc, (void *)ed);
if (ecomp != NULL)
DPRINTFN(5, "Found endpoint companion descriptor\n");
usb_init_endpoint(udev,
ips.iface_index, ed, ecomp, ep);
}
temp ++;
/* find maximum number of endpoints */
if (ep_max < temp)
ep_max = temp;
}
}
/* NOTE: It is valid to have no interfaces and no endpoints! */
if (cmd == USB_CFG_ALLOC) {
udev->ifaces_max = ips.iface_index;
#if (USB_HAVE_FIXED_IFACE == 0)
udev->ifaces = NULL;
if (udev->ifaces_max != 0) {
udev->ifaces = malloc(sizeof(*iface) * udev->ifaces_max,
M_USB, M_WAITOK | M_ZERO);
if (udev->ifaces == NULL) {
err = USB_ERR_NOMEM;
goto done;
}
}
#endif
#if (USB_HAVE_FIXED_ENDPOINT == 0)
if (ep_max != 0) {
udev->endpoints = malloc(sizeof(*ep) * ep_max,
M_USB, M_WAITOK | M_ZERO);
if (udev->endpoints == NULL) {
err = USB_ERR_NOMEM;
goto done;
}
} else {
udev->endpoints = NULL;
}
#endif
USB_BUS_LOCK(udev->bus);
udev->endpoints_max = ep_max;
/* reset any ongoing clear-stall */
udev->ep_curr = NULL;
USB_BUS_UNLOCK(udev->bus);
}
#if (USB_HAVE_FIXED_IFACE == 0) || (USB_HAVE_FIXED_ENDPOINT == 0)
done:
#endif
if (err) {
if (cmd == USB_CFG_ALLOC) {
cleanup:
USB_BUS_LOCK(udev->bus);
udev->endpoints_max = 0;
/* reset any ongoing clear-stall */
udev->ep_curr = NULL;
USB_BUS_UNLOCK(udev->bus);
#if (USB_HAVE_FIXED_IFACE == 0)
free(udev->ifaces, M_USB);
udev->ifaces = NULL;
#endif
#if (USB_HAVE_FIXED_ENDPOINT == 0)
free(udev->endpoints, M_USB);
udev->endpoints = NULL;
#endif
udev->ifaces_max = 0;
}
}
return (err);
}
/*------------------------------------------------------------------------*
* usbd_set_alt_interface_index
*
* This function will select an alternate interface index for the
* given interface index. The interface should not be in use when this
* function is called. That means there should not be any open USB
* transfers. Else an error is returned. If the alternate setting is
* already set this function will simply return success. This function
* is called in Host mode and Device mode!
*
* Returns:
* 0: Success
* Else: Failure
*------------------------------------------------------------------------*/
usb_error_t
usbd_set_alt_interface_index(struct usb_device *udev,
uint8_t iface_index, uint8_t alt_index)
{
struct usb_interface *iface = usbd_get_iface(udev, iface_index);
usb_error_t err;
uint8_t do_unlock;
/* Prevent re-enumeration */
do_unlock = usbd_enum_lock(udev);
if (iface == NULL) {
err = USB_ERR_INVAL;
goto done;
}
if (iface->alt_index == alt_index) {
/*
* Optimise away duplicate setting of
* alternate setting in USB Host Mode!
*/
err = 0;
goto done;
}
#if USB_HAVE_UGEN
/*
* Free all generic FIFOs for this interface, except control
* endpoint FIFOs:
*/
usb_fifo_free_wrap(udev, iface_index, 0);
#endif
err = usb_config_parse(udev, iface_index, alt_index);
if (err) {
goto done;
}
if (iface->alt_index != alt_index) {
/* the alternate setting does not exist */
err = USB_ERR_INVAL;
goto done;
}
err = usbd_req_set_alt_interface_no(udev, NULL, iface_index,
iface->idesc->bAlternateSetting);
done:
if (do_unlock)
usbd_enum_unlock(udev);
return (err);
}
/*------------------------------------------------------------------------*
* usbd_set_endpoint_stall
*
* This function is used to make a BULK or INTERRUPT endpoint send
* STALL tokens in USB device mode.
*
* Returns:
* 0: Success
* Else: Failure
*------------------------------------------------------------------------*/
usb_error_t
usbd_set_endpoint_stall(struct usb_device *udev, struct usb_endpoint *ep,
uint8_t do_stall)
{
struct usb_xfer *xfer;
usb_stream_t x;
uint8_t et;
uint8_t was_stalled;
if (ep == NULL) {
/* nothing to do */
DPRINTF("Cannot find endpoint\n");
/*
* Pretend that the clear or set stall request is
* successful else some USB host stacks can do
* strange things, especially when a control endpoint
* stalls.
*/
return (0);
}
et = (ep->edesc->bmAttributes & UE_XFERTYPE);
if ((et != UE_BULK) &&
(et != UE_INTERRUPT)) {
/*
* Should not stall control
* nor isochronous endpoints.
*/
DPRINTF("Invalid endpoint\n");
return (0);
}
USB_BUS_LOCK(udev->bus);
/* store current stall state */
was_stalled = ep->is_stalled;
/* check for no change */
if (was_stalled && do_stall) {
/* if the endpoint is already stalled do nothing */
USB_BUS_UNLOCK(udev->bus);
DPRINTF("No change\n");
return (0);
}
/* set stalled state */
ep->is_stalled = 1;
if (do_stall || (!was_stalled)) {
if (!was_stalled) {
for (x = 0; x != USB_MAX_EP_STREAMS; x++) {
/* lookup the current USB transfer, if any */
xfer = ep->endpoint_q[x].curr;
if (xfer != NULL) {
/*
* The "xfer_stall" method
* will complete the USB
* transfer like in case of a
* timeout setting the error
* code "USB_ERR_STALLED".
*/
(udev->bus->methods->xfer_stall) (xfer);
}
}
}
(udev->bus->methods->set_stall) (udev, ep, &do_stall);
}
if (!do_stall) {
ep->toggle_next = 0; /* reset data toggle */
ep->is_stalled = 0; /* clear stalled state */
(udev->bus->methods->clear_stall) (udev, ep);
/* start the current or next transfer, if any */
for (x = 0; x != USB_MAX_EP_STREAMS; x++) {
usb_command_wrapper(&ep->endpoint_q[x],
ep->endpoint_q[x].curr);
}
}
USB_BUS_UNLOCK(udev->bus);
return (0);
}
/*------------------------------------------------------------------------*
* usb_reset_iface_endpoints - used in USB device side mode
*------------------------------------------------------------------------*/
usb_error_t
usb_reset_iface_endpoints(struct usb_device *udev, uint8_t iface_index)
{
struct usb_endpoint *ep;
struct usb_endpoint *ep_end;
ep = udev->endpoints;
ep_end = udev->endpoints + udev->endpoints_max;
for (; ep != ep_end; ep++) {
if ((ep->edesc == NULL) ||
(ep->iface_index != iface_index)) {
continue;
}
/* simulate a clear stall from the peer */
usbd_set_endpoint_stall(udev, ep, 0);
}
return (0);
}
/*------------------------------------------------------------------------*
* usb_detach_device_sub
*
* This function will try to detach an USB device. If it fails a panic
* will result.
*
* Flag values, see "USB_UNCFG_FLAG_XXX".
*------------------------------------------------------------------------*/
static void
usb_detach_device_sub(struct usb_device *udev, device_t *ppdev,
char **ppnpinfo, uint8_t flag)
{
device_t dev;
char *pnpinfo;
int err;
dev = *ppdev;
if (dev) {
/*
* NOTE: It is important to clear "*ppdev" before deleting
* the child due to some device methods being called late
* during the delete process !
*/
*ppdev = NULL;
if (!rebooting) {
device_printf(dev, "at %s, port %d, addr %d "
"(disconnected)\n",
device_get_nameunit(udev->parent_dev),
udev->port_no, udev->address);
}
if (device_is_attached(dev)) {
if (udev->flags.peer_suspended) {
err = DEVICE_RESUME(dev);
if (err) {
device_printf(dev, "Resume failed\n");
}
}
if (device_detach(dev)) {
goto error;
}
}
if (device_delete_child(udev->parent_dev, dev)) {
goto error;
}
}
pnpinfo = *ppnpinfo;
if (pnpinfo != NULL) {
*ppnpinfo = NULL;
free(pnpinfo, M_USBDEV);
}
return;
error:
/* Detach is not allowed to fail in the USB world */
panic("usb_detach_device_sub: A USB driver would not detach\n");
}
/*------------------------------------------------------------------------*
* usb_detach_device
*
* The following function will detach the matching interfaces.
* This function is NULL safe.
*
* Flag values, see "USB_UNCFG_FLAG_XXX".
*------------------------------------------------------------------------*/
void
usb_detach_device(struct usb_device *udev, uint8_t iface_index,
uint8_t flag)
{
struct usb_interface *iface;
uint8_t i;
if (udev == NULL) {
/* nothing to do */
return;
}
DPRINTFN(4, "udev=%p\n", udev);
sx_assert(&udev->enum_sx, SA_LOCKED);
/*
* First detach the child to give the child's detach routine a
* chance to detach the sub-devices in the correct order.
* Then delete the child using "device_delete_child()" which
* will detach all sub-devices from the bottom and upwards!
*/
if (iface_index != USB_IFACE_INDEX_ANY) {
i = iface_index;
iface_index = i + 1;
} else {
i = 0;
iface_index = USB_IFACE_MAX;
}
/* do the detach */
for (; i != iface_index; i++) {
iface = usbd_get_iface(udev, i);
if (iface == NULL) {
/* looks like the end of the USB interfaces */
break;
}
usb_detach_device_sub(udev, &iface->subdev,
&iface->pnpinfo, flag);
}
}
/*------------------------------------------------------------------------*
* usb_probe_and_attach_sub
*
* Returns:
* 0: Success
* Else: Failure
*------------------------------------------------------------------------*/
static uint8_t
usb_probe_and_attach_sub(struct usb_device *udev,
struct usb_attach_arg *uaa)
{
struct usb_interface *iface;
device_t dev;
int err;
iface = uaa->iface;
if (iface->parent_iface_index != USB_IFACE_INDEX_ANY) {
/* leave interface alone */
return (0);
}
dev = iface->subdev;
if (dev) {
/* clean up after module unload */
if (device_is_attached(dev)) {
/* already a device there */
return (0);
}
/* clear "iface->subdev" as early as possible */
iface->subdev = NULL;
if (device_delete_child(udev->parent_dev, dev)) {
/*
* Panic here, else one can get a double call
* to device_detach(). USB devices should
* never fail on detach!
*/
panic("device_delete_child() failed\n");
}
}
if (uaa->temp_dev == NULL) {
/* create a new child */
uaa->temp_dev = device_add_child(udev->parent_dev, NULL, -1);
if (uaa->temp_dev == NULL) {
device_printf(udev->parent_dev,
"Device creation failed\n");
return (1); /* failure */
}
device_set_ivars(uaa->temp_dev, uaa);
device_quiet(uaa->temp_dev);
}
/*
* Set "subdev" before probe and attach so that "devd" gets
* the information it needs.
*/
iface->subdev = uaa->temp_dev;
if (device_probe_and_attach(iface->subdev) == 0) {
/*
* The USB attach arguments are only available during probe
* and attach !
*/
uaa->temp_dev = NULL;
device_set_ivars(iface->subdev, NULL);
if (udev->flags.peer_suspended) {
err = DEVICE_SUSPEND(iface->subdev);
if (err)
device_printf(iface->subdev, "Suspend failed\n");
}
return (0); /* success */
} else {
/* No USB driver found */
iface->subdev = NULL;
}
return (1); /* failure */
}
/*------------------------------------------------------------------------*
* usbd_set_parent_iface
*
* Using this function will lock the alternate interface setting on an
* interface. It is typically used for multi interface drivers. In USB
* device side mode it is assumed that the alternate interfaces all
* have the same endpoint descriptors. The default parent index value
* is "USB_IFACE_INDEX_ANY". Then the alternate setting value is not
* locked.
*------------------------------------------------------------------------*/
void
usbd_set_parent_iface(struct usb_device *udev, uint8_t iface_index,
uint8_t parent_index)
{
struct usb_interface *iface;
if (udev == NULL) {
/* nothing to do */
return;
}
iface = usbd_get_iface(udev, iface_index);
if (iface != NULL)
iface->parent_iface_index = parent_index;
}
static void
usb_init_attach_arg(struct usb_device *udev,
struct usb_attach_arg *uaa)
{
memset(uaa, 0, sizeof(*uaa));
uaa->device = udev;
uaa->usb_mode = udev->flags.usb_mode;
uaa->port = udev->port_no;
uaa->dev_state = UAA_DEV_READY;
uaa->info.idVendor = UGETW(udev->ddesc.idVendor);
uaa->info.idProduct = UGETW(udev->ddesc.idProduct);
uaa->info.bcdDevice = UGETW(udev->ddesc.bcdDevice);
uaa->info.bDeviceClass = udev->ddesc.bDeviceClass;
uaa->info.bDeviceSubClass = udev->ddesc.bDeviceSubClass;
uaa->info.bDeviceProtocol = udev->ddesc.bDeviceProtocol;
uaa->info.bConfigIndex = udev->curr_config_index;
uaa->info.bConfigNum = udev->curr_config_no;
}
/*------------------------------------------------------------------------*
* usb_probe_and_attach
*
* This function is called from "uhub_explore_sub()",
* "usb_handle_set_config()" and "usb_handle_request()".
*
* Returns:
* 0: Success
* Else: A control transfer failed
*------------------------------------------------------------------------*/
usb_error_t
usb_probe_and_attach(struct usb_device *udev, uint8_t iface_index)
{
struct usb_attach_arg uaa;
struct usb_interface *iface;
uint8_t i;
uint8_t j;
uint8_t do_unlock;
if (udev == NULL) {
DPRINTF("udev == NULL\n");
return (USB_ERR_INVAL);
}
/* Prevent re-enumeration */
do_unlock = usbd_enum_lock(udev);
if (udev->curr_config_index == USB_UNCONFIG_INDEX) {
/* do nothing - no configuration has been set */
goto done;
}
/* setup USB attach arguments */
usb_init_attach_arg(udev, &uaa);
/*
* If the whole USB device is targeted, invoke the USB event
* handler(s):
*/
if (iface_index == USB_IFACE_INDEX_ANY) {
if (usb_test_quirk(&uaa, UQ_MSC_DYMO_EJECT) != 0 &&
usb_dymo_eject(udev, 0) == 0) {
/* success, mark the udev as disappearing */
uaa.dev_state = UAA_DEV_EJECTING;
}
EVENTHANDLER_INVOKE(usb_dev_configured, udev, &uaa);
if (uaa.dev_state != UAA_DEV_READY) {
/* leave device unconfigured */
usb_unconfigure(udev, 0);
goto done;
}
}
/* Check if only one interface should be probed: */
if (iface_index != USB_IFACE_INDEX_ANY) {
i = iface_index;
j = i + 1;
} else {
i = 0;
j = USB_IFACE_MAX;
}
/* Do the probe and attach */
for (; i != j; i++) {
iface = usbd_get_iface(udev, i);
if (iface == NULL) {
/*
* Looks like the end of the USB
* interfaces !
*/
DPRINTFN(2, "end of interfaces "
"at %u\n", i);
break;
}
if (iface->idesc == NULL) {
/* no interface descriptor */
continue;
}
uaa.iface = iface;
uaa.info.bInterfaceClass =
iface->idesc->bInterfaceClass;
uaa.info.bInterfaceSubClass =
iface->idesc->bInterfaceSubClass;
uaa.info.bInterfaceProtocol =
iface->idesc->bInterfaceProtocol;
uaa.info.bIfaceIndex = i;
uaa.info.bIfaceNum =
iface->idesc->bInterfaceNumber;
uaa.driver_info = 0; /* reset driver_info */
DPRINTFN(2, "iclass=%u/%u/%u iindex=%u/%u\n",
uaa.info.bInterfaceClass,
uaa.info.bInterfaceSubClass,
uaa.info.bInterfaceProtocol,
uaa.info.bIfaceIndex,
uaa.info.bIfaceNum);
usb_probe_and_attach_sub(udev, &uaa);
/*
* Remove the leftover child, if any, to enforce that
* a new nomatch devd event is generated for the next
* interface if no driver is found:
*/
if (uaa.temp_dev == NULL)
continue;
if (device_delete_child(udev->parent_dev, uaa.temp_dev))
DPRINTFN(0, "device delete child failed\n");
uaa.temp_dev = NULL;
}
done:
if (do_unlock)
usbd_enum_unlock(udev);
return (0);
}
/*------------------------------------------------------------------------*
* usb_suspend_resume_sub
*
* This function is called when the suspend or resume methods should
* be executed on an USB device.
*------------------------------------------------------------------------*/
static void
usb_suspend_resume_sub(struct usb_device *udev, device_t dev, uint8_t do_suspend)
{
int err;
if (dev == NULL) {
return;
}
if (!device_is_attached(dev)) {
return;
}
if (do_suspend) {
err = DEVICE_SUSPEND(dev);
} else {
err = DEVICE_RESUME(dev);
}
if (err) {
device_printf(dev, "%s failed\n",
do_suspend ? "Suspend" : "Resume");
}
}
/*------------------------------------------------------------------------*
* usb_suspend_resume
*
* The following function will suspend or resume the USB device.
*
* Returns:
* 0: Success
* Else: Failure
*------------------------------------------------------------------------*/
usb_error_t
usb_suspend_resume(struct usb_device *udev, uint8_t do_suspend)
{
struct usb_interface *iface;
uint8_t i;
if (udev == NULL) {
/* nothing to do */
return (0);
}
DPRINTFN(4, "udev=%p do_suspend=%d\n", udev, do_suspend);
sx_assert(&udev->sr_sx, SA_LOCKED);
USB_BUS_LOCK(udev->bus);
/* filter the suspend events */
if (udev->flags.peer_suspended == do_suspend) {
USB_BUS_UNLOCK(udev->bus);
/* nothing to do */
return (0);
}
udev->flags.peer_suspended = do_suspend;
USB_BUS_UNLOCK(udev->bus);
/* do the suspend or resume */
for (i = 0; i != USB_IFACE_MAX; i++) {
iface = usbd_get_iface(udev, i);
if (iface == NULL) {
/* looks like the end of the USB interfaces */
break;
}
usb_suspend_resume_sub(udev, iface->subdev, do_suspend);
}
return (0);
}
/*------------------------------------------------------------------------*
* usbd_clear_stall_proc
*
* This function performs generic USB clear stall operations.
*------------------------------------------------------------------------*/
static void
usbd_clear_stall_proc(struct usb_proc_msg *_pm)
{
struct usb_udev_msg *pm = (void *)_pm;
struct usb_device *udev = pm->udev;
/* Change lock */
USB_BUS_UNLOCK(udev->bus);
mtx_lock(&udev->device_mtx);
/* Start clear stall callback */
usbd_transfer_start(udev->ctrl_xfer[1]);
/* Change lock */
mtx_unlock(&udev->device_mtx);
USB_BUS_LOCK(udev->bus);
}
/*------------------------------------------------------------------------*
* usb_alloc_device
*
* This function allocates a new USB device. This function is called
* when a new device has been put in the powered state, but not yet in
* the addressed state. Get initial descriptor, set the address, get
* full descriptor and get strings.
*
* Return values:
* 0: Failure
* Else: Success
*------------------------------------------------------------------------*/
struct usb_device *
usb_alloc_device(device_t parent_dev, struct usb_bus *bus,
struct usb_device *parent_hub, uint8_t depth, uint8_t port_index,
uint8_t port_no, enum usb_dev_speed speed, enum usb_hc_mode mode)
{
struct usb_attach_arg uaa;
struct usb_device *udev;
struct usb_device *adev;
struct usb_device *hub;
uint8_t *scratch_ptr;
usb_error_t err;
uint8_t device_index;
uint8_t config_index;
uint8_t config_quirk;
uint8_t set_config_failed;
uint8_t do_unlock;
DPRINTF("parent_dev=%p, bus=%p, parent_hub=%p, depth=%u, "
"port_index=%u, port_no=%u, speed=%u, usb_mode=%u\n",
parent_dev, bus, parent_hub, depth, port_index, port_no,
speed, mode);
/*
* Find an unused device index. In USB Host mode this is the
* same as the device address.
*
* Device index zero is not used and device index 1 should
* always be the root hub.
*/
for (device_index = USB_ROOT_HUB_ADDR;
(device_index != bus->devices_max) &&
(bus->devices[device_index] != NULL);
device_index++) /* nop */;
if (device_index == bus->devices_max) {
device_printf(bus->bdev,
"No free USB device index for new device\n");
return (NULL);
}
if (depth > 0x10) {
device_printf(bus->bdev,
"Invalid device depth\n");
return (NULL);
}
udev = malloc(sizeof(*udev), M_USB, M_WAITOK | M_ZERO);
if (udev == NULL) {
return (NULL);
}
/* initialise our SX-lock */
sx_init_flags(&udev->enum_sx, "USB config SX lock", SX_DUPOK);
sx_init_flags(&udev->sr_sx, "USB suspend and resume SX lock", SX_NOWITNESS);
sx_init_flags(&udev->ctrl_sx, "USB control transfer SX lock", SX_DUPOK);
cv_init(&udev->ctrlreq_cv, "WCTRL");
cv_init(&udev->ref_cv, "UGONE");
/* initialise our mutex */
mtx_init(&udev->device_mtx, "USB device mutex", NULL, MTX_DEF);
/* initialise generic clear stall */
udev->cs_msg[0].hdr.pm_callback = &usbd_clear_stall_proc;
udev->cs_msg[0].udev = udev;
udev->cs_msg[1].hdr.pm_callback = &usbd_clear_stall_proc;
udev->cs_msg[1].udev = udev;
/* initialise some USB device fields */
udev->parent_hub = parent_hub;
udev->parent_dev = parent_dev;
udev->port_index = port_index;
udev->port_no = port_no;
udev->depth = depth;
udev->bus = bus;
udev->address = USB_START_ADDR; /* default value */
udev->plugtime = (usb_ticks_t)ticks;
/*
* We need to force the power mode to "on" because there are plenty
* of USB devices out there that do not work very well with
* automatic suspend and resume!
*/
udev->power_mode = usbd_filter_power_mode(udev, USB_POWER_MODE_ON);
udev->pwr_save.last_xfer_time = ticks;
/* we are not ready yet */
udev->refcount = 1;
/* set up default endpoint descriptor */
udev->ctrl_ep_desc.bLength = sizeof(udev->ctrl_ep_desc);
udev->ctrl_ep_desc.bDescriptorType = UDESC_ENDPOINT;
udev->ctrl_ep_desc.bEndpointAddress = USB_CONTROL_ENDPOINT;
udev->ctrl_ep_desc.bmAttributes = UE_CONTROL;
udev->ctrl_ep_desc.wMaxPacketSize[0] = USB_MAX_IPACKET;
udev->ctrl_ep_desc.wMaxPacketSize[1] = 0;
udev->ctrl_ep_desc.bInterval = 0;
/* set up default endpoint companion descriptor */
udev->ctrl_ep_comp_desc.bLength = sizeof(udev->ctrl_ep_comp_desc);
udev->ctrl_ep_comp_desc.bDescriptorType = UDESC_ENDPOINT_SS_COMP;
udev->ddesc.bMaxPacketSize = USB_MAX_IPACKET;
udev->speed = speed;
udev->flags.usb_mode = mode;
/* search for our High Speed USB HUB, if any */
adev = udev;
hub = udev->parent_hub;
while (hub) {
if (hub->speed == USB_SPEED_HIGH) {
udev->hs_hub_addr = hub->address;
udev->parent_hs_hub = hub;
udev->hs_port_no = adev->port_no;
break;
}
adev = hub;
hub = hub->parent_hub;
}
/* init the default endpoint */
usb_init_endpoint(udev, 0,
&udev->ctrl_ep_desc,
&udev->ctrl_ep_comp_desc,
&udev->ctrl_ep);
/* set device index */
udev->device_index = device_index;
#if USB_HAVE_UGEN
/* Create ugen name */
snprintf(udev->ugen_name, sizeof(udev->ugen_name),
USB_GENERIC_NAME "%u.%u", device_get_unit(bus->bdev),
device_index);
LIST_INIT(&udev->pd_list);
/* Create the control endpoint device */
udev->ctrl_dev = usb_make_dev(udev, NULL, 0, 0,
FREAD|FWRITE, UID_ROOT, GID_OPERATOR, 0600);
/* Create a link from /dev/ugenX.X to the default endpoint */
if (udev->ctrl_dev != NULL)
make_dev_alias(udev->ctrl_dev->cdev, "%s", udev->ugen_name);
#endif
/* Initialise device */
if (bus->methods->device_init != NULL) {
err = (bus->methods->device_init) (udev);
if (err != 0) {
DPRINTFN(0, "device init %d failed "
"(%s, ignored)\n", device_index,
usbd_errstr(err));
goto done;
}
}
/* set powered device state after device init is complete */
usb_set_device_state(udev, USB_STATE_POWERED);
if (udev->flags.usb_mode == USB_MODE_HOST) {
err = usbd_req_set_address(udev, NULL, device_index);
/*
* This is the new USB device address from now on, if
* the set address request didn't set it already.
*/
if (udev->address == USB_START_ADDR)
udev->address = device_index;
/*
* We ignore any set-address errors, hence there are
* buggy USB devices out there that actually receive
* the SETUP PID, but manage to set the address before
* the STATUS stage is ACK'ed. If the device responds
* to the subsequent get-descriptor at the new
* address, then we know that the set-address command
* was successful.
*/
if (err) {
DPRINTFN(0, "set address %d failed "
"(%s, ignored)\n", udev->address,
usbd_errstr(err));
}
} else {
/* We are not self powered */
udev->flags.self_powered = 0;
/* Set unconfigured state */
udev->curr_config_no = USB_UNCONFIG_NO;
udev->curr_config_index = USB_UNCONFIG_INDEX;
/* Setup USB descriptors */
err = (usb_temp_setup_by_index_p) (udev, usb_template);
if (err) {
DPRINTFN(0, "setting up USB template failed - "
"usb_template(4) not loaded?\n");
goto done;
}
}
usb_set_device_state(udev, USB_STATE_ADDRESSED);
/* setup the device descriptor and the initial "wMaxPacketSize" */
err = usbd_setup_device_desc(udev, NULL);
if (err != 0) {
/* try to enumerate two more times */
err = usbd_req_re_enumerate(udev, NULL);
if (err != 0) {
err = usbd_req_re_enumerate(udev, NULL);
if (err != 0) {
goto done;
}
}
}
/*
* Setup temporary USB attach args so that we can figure out some
* basic quirks for this device.
*/
usb_init_attach_arg(udev, &uaa);
if (usb_test_quirk(&uaa, UQ_BUS_POWERED)) {
udev->flags.uq_bus_powered = 1;
}
if (usb_test_quirk(&uaa, UQ_NO_STRINGS)) {
udev->flags.no_strings = 1;
}
/*
* Workaround for buggy USB devices.
*
* It appears that some string-less USB chips will crash and
* disappear if any attempts are made to read any string
* descriptors.
*
* Try to detect such chips by checking the strings in the USB
* device descriptor. If no strings are present there we
* simply disable all USB strings.
*/
/* Protect scratch area */
do_unlock = usbd_ctrl_lock(udev);
scratch_ptr = udev->scratch.data;
if (udev->flags.no_strings) {
err = USB_ERR_INVAL;
} else if (udev->ddesc.iManufacturer ||
udev->ddesc.iProduct ||
udev->ddesc.iSerialNumber) {
/* read out the language ID string */
err = usbd_req_get_string_desc(udev, NULL,
(char *)scratch_ptr, 4, 0, USB_LANGUAGE_TABLE);
} else {
err = USB_ERR_INVAL;
}
if (err || (scratch_ptr[0] < 4)) {
udev->flags.no_strings = 1;
} else {
uint16_t langid;
uint16_t pref;
uint16_t mask;
uint8_t x;
/* load preferred value and mask */
pref = usb_lang_id;
mask = usb_lang_mask;
/* align length correctly */
scratch_ptr[0] &= ~1U;
/* fix compiler warning */
langid = 0;
/* search for preferred language */
for (x = 2; (x < scratch_ptr[0]); x += 2) {
langid = UGETW(scratch_ptr + x);
if ((langid & mask) == pref)
break;
}
if (x >= scratch_ptr[0]) {
/* pick the first language as the default */
DPRINTFN(1, "Using first language\n");
langid = UGETW(scratch_ptr + 2);
}
DPRINTFN(1, "Language selected: 0x%04x\n", langid);
udev->langid = langid;
}
if (do_unlock)
usbd_ctrl_unlock(udev);
/* assume 100mA bus powered for now. Changed when configured. */
udev->power = USB_MIN_POWER;
/* fetch the vendor and product strings from the device */
usbd_set_device_strings(udev);
if (udev->flags.usb_mode == USB_MODE_DEVICE) {
/* USB device mode setup is complete */
err = 0;
goto config_done;
}
/*
* Most USB devices should attach to config index 0 by
* default
*/
if (usb_test_quirk(&uaa, UQ_CFG_INDEX_0)) {
config_index = 0;
config_quirk = 1;
} else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_1)) {
config_index = 1;
config_quirk = 1;
} else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_2)) {
config_index = 2;
config_quirk = 1;
} else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_3)) {
config_index = 3;
config_quirk = 1;
} else if (usb_test_quirk(&uaa, UQ_CFG_INDEX_4)) {
config_index = 4;
config_quirk = 1;
} else {
config_index = 0;
config_quirk = 0;
}
set_config_failed = 0;
repeat_set_config:
DPRINTF("setting config %u\n", config_index);
/* get the USB device configured */
err = usbd_set_config_index(udev, config_index);
if (err) {
if (udev->ddesc.bNumConfigurations != 0) {
if (!set_config_failed) {
set_config_failed = 1;
/* XXX try to re-enumerate the device */
err = usbd_req_re_enumerate(udev, NULL);
if (err == 0)
goto repeat_set_config;
}
DPRINTFN(0, "Failure selecting configuration index %u:"
"%s, port %u, addr %u (ignored)\n",
config_index, usbd_errstr(err), udev->port_no,
udev->address);
}
/*
* Some USB devices do not have any configurations. Ignore any
* set config failures!
*/
err = 0;
goto config_done;
}
if (!config_quirk && config_index + 1 < udev->ddesc.bNumConfigurations) {
if ((udev->cdesc->bNumInterface < 2) &&
usbd_get_no_descriptors(udev->cdesc, UDESC_ENDPOINT) == 0) {
DPRINTFN(0, "Found no endpoints, trying next config\n");
config_index++;
goto repeat_set_config;
}
#if USB_HAVE_MSCTEST
if (config_index == 0) {
/*
* Try to figure out if we have an
* auto-install disk there:
*/
if (usb_iface_is_cdrom(udev, 0)) {
DPRINTFN(0, "Found possible auto-install "
"disk (trying next config)\n");
config_index++;
goto repeat_set_config;
}
}
#endif
}
#if USB_HAVE_MSCTEST
if (set_config_failed == 0 && config_index == 0 &&
usb_test_quirk(&uaa, UQ_MSC_NO_SYNC_CACHE) == 0 &&
usb_test_quirk(&uaa, UQ_MSC_NO_GETMAXLUN) == 0) {
/*
* Try to figure out if there are any MSC quirks we
* should apply automatically:
*/
err = usb_msc_auto_quirk(udev, 0);
if (err != 0) {
set_config_failed = 1;
goto repeat_set_config;
}
}
#endif
config_done:
DPRINTF("new dev (addr %d), udev=%p, parent_hub=%p\n",
udev->address, udev, udev->parent_hub);
/* register our device - we are ready */
usb_bus_port_set_device(bus, parent_hub ?
parent_hub->hub->ports + port_index : NULL, udev, device_index);
#if USB_HAVE_UGEN
/* Symlink the ugen device name */
udev->ugen_symlink = usb_alloc_symlink(udev->ugen_name);
/* Announce device */
printf("%s: <%s> at %s\n", udev->ugen_name,
usb_get_manufacturer(udev),
device_get_nameunit(udev->bus->bdev));
#endif
#if USB_HAVE_DEVCTL
usb_notify_addq("ATTACH", udev);
#endif
done:
if (err) {
/*
* Free USB device and all subdevices, if any.
*/
usb_free_device(udev, 0);
udev = NULL;
}
return (udev);
}
#if USB_HAVE_UGEN
struct usb_fs_privdata *
usb_make_dev(struct usb_device *udev, const char *devname, int ep,
int fi, int rwmode, uid_t uid, gid_t gid, int mode)
{
struct usb_fs_privdata* pd;
struct make_dev_args args;
char buffer[32];
/* Store information to locate ourselves again later */
pd = malloc(sizeof(struct usb_fs_privdata), M_USBDEV,
M_WAITOK | M_ZERO);
pd->bus_index = device_get_unit(udev->bus->bdev);
pd->dev_index = udev->device_index;
pd->ep_addr = ep;
pd->fifo_index = fi;
pd->mode = rwmode;
/* Now, create the device itself */
if (devname == NULL) {
devname = buffer;
snprintf(buffer, sizeof(buffer), USB_DEVICE_DIR "/%u.%u.%u",
pd->bus_index, pd->dev_index, pd->ep_addr);
}
/* Setup arguments for make_dev_s() */
make_dev_args_init(&args);
args.mda_devsw = &usb_devsw;
args.mda_uid = uid;
args.mda_gid = gid;
args.mda_mode = mode;
args.mda_si_drv1 = pd;
if (make_dev_s(&args, &pd->cdev, "%s", devname) != 0) {
DPRINTFN(0, "Failed to create device %s\n", devname);
free(pd, M_USBDEV);
return (NULL);
}
return (pd);
}
void
usb_destroy_dev_sync(struct usb_fs_privdata *pd)
{
DPRINTFN(1, "Destroying device at ugen%d.%d\n",
pd->bus_index, pd->dev_index);
/*
* Destroy character device synchronously. After this
* all system calls are returned. Can block.
*/
destroy_dev(pd->cdev);
free(pd, M_USBDEV);
}
void
usb_destroy_dev(struct usb_fs_privdata *pd)
{
struct usb_bus *bus;
if (pd == NULL)
return;
mtx_lock(&usb_ref_lock);
bus = devclass_get_softc(usb_devclass_ptr, pd->bus_index);
mtx_unlock(&usb_ref_lock);
if (bus == NULL) {
usb_destroy_dev_sync(pd);
return;
}
/* make sure we can re-use the device name */
delist_dev(pd->cdev);
USB_BUS_LOCK(bus);
LIST_INSERT_HEAD(&bus->pd_cleanup_list, pd, pd_next);
/* get cleanup going */
usb_proc_msignal(USB_BUS_EXPLORE_PROC(bus),
&bus->cleanup_msg[0], &bus->cleanup_msg[1]);
USB_BUS_UNLOCK(bus);
}
static void
usb_cdev_create(struct usb_device *udev)
{
struct usb_config_descriptor *cd;
struct usb_endpoint_descriptor *ed;
struct usb_descriptor *desc;
struct usb_fs_privdata* pd;
int inmode, outmode, inmask, outmask, mode;
uint8_t ep;
KASSERT(LIST_FIRST(&udev->pd_list) == NULL, ("stale cdev entries"));
DPRINTFN(2, "Creating device nodes\n");
if (usbd_get_mode(udev) == USB_MODE_DEVICE) {
inmode = FWRITE;
outmode = FREAD;
} else { /* USB_MODE_HOST */
inmode = FREAD;
outmode = FWRITE;
}
inmask = 0;
outmask = 0;
desc = NULL;
/*
* Collect all used endpoint numbers instead of just
* generating 16 static endpoints.
*/
cd = usbd_get_config_descriptor(udev);
while ((desc = usb_desc_foreach(cd, desc))) {
/* filter out all endpoint descriptors */
if ((desc->bDescriptorType == UDESC_ENDPOINT) &&
(desc->bLength >= sizeof(*ed))) {
ed = (struct usb_endpoint_descriptor *)desc;
/* update masks */
ep = ed->bEndpointAddress;
if (UE_GET_DIR(ep) == UE_DIR_OUT)
outmask |= 1 << UE_GET_ADDR(ep);
else
inmask |= 1 << UE_GET_ADDR(ep);
}
}
/* Create all available endpoints except EP0 */
for (ep = 1; ep < 16; ep++) {
mode = (inmask & (1 << ep)) ? inmode : 0;
mode |= (outmask & (1 << ep)) ? outmode : 0;
if (mode == 0)
continue; /* no IN or OUT endpoint */
pd = usb_make_dev(udev, NULL, ep, 0,
mode, UID_ROOT, GID_OPERATOR, 0600);
if (pd != NULL)
LIST_INSERT_HEAD(&udev->pd_list, pd, pd_next);
}
}
static void
usb_cdev_free(struct usb_device *udev)
{
struct usb_fs_privdata* pd;
DPRINTFN(2, "Freeing device nodes\n");
while ((pd = LIST_FIRST(&udev->pd_list)) != NULL) {
KASSERT(pd->cdev->si_drv1 == pd, ("privdata corrupt"));
LIST_REMOVE(pd, pd_next);
usb_destroy_dev(pd);
}
}
#endif
/*------------------------------------------------------------------------*
* usb_free_device
*
* This function is NULL safe and will free an USB device and its
* children devices, if any.
*
* Flag values: Reserved, set to zero.
*------------------------------------------------------------------------*/
void
usb_free_device(struct usb_device *udev, uint8_t flag)
{
struct usb_bus *bus;
if (udev == NULL)
return; /* already freed */
DPRINTFN(4, "udev=%p port=%d\n", udev, udev->port_no);
bus = udev->bus;
/* set DETACHED state to prevent any further references */
usb_set_device_state(udev, USB_STATE_DETACHED);
#if USB_HAVE_DEVCTL
usb_notify_addq("DETACH", udev);
#endif
#if USB_HAVE_UGEN
if (!rebooting) {
printf("%s: <%s> at %s (disconnected)\n", udev->ugen_name,
usb_get_manufacturer(udev), device_get_nameunit(bus->bdev));
}
/* Destroy UGEN symlink, if any */
if (udev->ugen_symlink) {
usb_free_symlink(udev->ugen_symlink);
udev->ugen_symlink = NULL;
}
usb_destroy_dev(udev->ctrl_dev);
#endif
if (udev->flags.usb_mode == USB_MODE_DEVICE) {
/* stop receiving any control transfers (Device Side Mode) */
usbd_transfer_unsetup(udev->ctrl_xfer, USB_CTRL_XFER_MAX);
}
/* the following will get the device unconfigured in software */
usb_unconfigure(udev, USB_UNCFG_FLAG_FREE_EP0);
/* final device unregister after all character devices are closed */
usb_bus_port_set_device(bus, udev->parent_hub ?
udev->parent_hub->hub->ports + udev->port_index : NULL,
NULL, USB_ROOT_HUB_ADDR);
/* unsetup any leftover default USB transfers */
usbd_transfer_unsetup(udev->ctrl_xfer, USB_CTRL_XFER_MAX);
/* template unsetup, if any */
(usb_temp_unsetup_p) (udev);
/*
* Make sure that our clear-stall messages are not queued
* anywhere:
*/
USB_BUS_LOCK(udev->bus);
usb_proc_mwait(USB_BUS_CS_PROC(udev->bus),
&udev->cs_msg[0], &udev->cs_msg[1]);
USB_BUS_UNLOCK(udev->bus);
/* wait for all references to go away */
usb_wait_pending_refs(udev);
sx_destroy(&udev->enum_sx);
sx_destroy(&udev->sr_sx);
sx_destroy(&udev->ctrl_sx);
cv_destroy(&udev->ctrlreq_cv);
cv_destroy(&udev->ref_cv);
mtx_destroy(&udev->device_mtx);
#if USB_HAVE_UGEN
KASSERT(LIST_FIRST(&udev->pd_list) == NULL, ("leaked cdev entries"));
#endif
/* Uninitialise device */
if (bus->methods->device_uninit != NULL)
(bus->methods->device_uninit) (udev);
/* free device */
free(udev->serial, M_USB);
free(udev->manufacturer, M_USB);
free(udev->product, M_USB);
free(udev, M_USB);
}
/*------------------------------------------------------------------------*
* usbd_get_iface
*
* This function is the safe way to get the USB interface structure
* pointer by interface index.
*
* Return values:
* NULL: Interface not present.
* Else: Pointer to USB interface structure.
*------------------------------------------------------------------------*/
struct usb_interface *
usbd_get_iface(struct usb_device *udev, uint8_t iface_index)
{
struct usb_interface *iface = udev->ifaces + iface_index;
if (iface_index >= udev->ifaces_max)
return (NULL);
return (iface);
}
/*------------------------------------------------------------------------*
* usbd_find_descriptor
*
* This function will lookup the first descriptor that matches the
* criteria given by the arguments "type" and "subtype". Descriptors
* will only be searched within the interface having the index
* "iface_index". If the "id" argument points to an USB descriptor,
* it will be skipped before the search is started. This allows
* searching for multiple descriptors using the same criteria. Else
* the search is started after the interface descriptor.
*
* Return values:
* NULL: End of descriptors
* Else: A descriptor matching the criteria
*------------------------------------------------------------------------*/
void *
usbd_find_descriptor(struct usb_device *udev, void *id, uint8_t iface_index,
uint8_t type, uint8_t type_mask,
uint8_t subtype, uint8_t subtype_mask)
{
struct usb_descriptor *desc;
struct usb_config_descriptor *cd;
struct usb_interface *iface;
cd = usbd_get_config_descriptor(udev);
if (cd == NULL) {
return (NULL);
}
if (id == NULL) {
iface = usbd_get_iface(udev, iface_index);
if (iface == NULL) {
return (NULL);
}
id = usbd_get_interface_descriptor(iface);
if (id == NULL) {
return (NULL);
}
}
desc = (void *)id;
while ((desc = usb_desc_foreach(cd, desc))) {
if (desc->bDescriptorType == UDESC_INTERFACE) {
break;
}
if (((desc->bDescriptorType & type_mask) == type) &&
((desc->bDescriptorSubtype & subtype_mask) == subtype)) {
return (desc);
}
}
return (NULL);
}
/*------------------------------------------------------------------------*
* usb_devinfo
*
* This function will dump information from the device descriptor
* belonging to the USB device pointed to by "udev", to the string
* pointed to by "dst_ptr" having a maximum length of "dst_len" bytes
* including the terminating zero.
*------------------------------------------------------------------------*/
void
usb_devinfo(struct usb_device *udev, char *dst_ptr, uint16_t dst_len)
{
struct usb_device_descriptor *udd = &udev->ddesc;
uint16_t bcdDevice;
uint16_t bcdUSB;
bcdUSB = UGETW(udd->bcdUSB);
bcdDevice = UGETW(udd->bcdDevice);
if (udd->bDeviceClass != 0xFF) {
snprintf(dst_ptr, dst_len, "%s %s, class %d/%d, rev %x.%02x/"
"%x.%02x, addr %d",
usb_get_manufacturer(udev),
usb_get_product(udev),
udd->bDeviceClass, udd->bDeviceSubClass,
(bcdUSB >> 8), bcdUSB & 0xFF,
(bcdDevice >> 8), bcdDevice & 0xFF,
udev->address);
} else {
snprintf(dst_ptr, dst_len, "%s %s, rev %x.%02x/"
"%x.%02x, addr %d",
usb_get_manufacturer(udev),
usb_get_product(udev),
(bcdUSB >> 8), bcdUSB & 0xFF,
(bcdDevice >> 8), bcdDevice & 0xFF,
udev->address);
}
}
#ifdef USB_VERBOSE
/*
* Descriptions of of known vendors and devices ("products").
*/
struct usb_knowndev {
uint16_t vendor;
uint16_t product;
uint32_t flags;
const char *vendorname;
const char *productname;
};
#define USB_KNOWNDEV_NOPROD 0x01 /* match on vendor only */
#include "usbdevs.h"
#include "usbdevs_data.h"
#endif /* USB_VERBOSE */
static void
usbd_set_device_strings(struct usb_device *udev)
{
struct usb_device_descriptor *udd = &udev->ddesc;
#ifdef USB_VERBOSE
const struct usb_knowndev *kdp;
#endif
char *temp_ptr;
size_t temp_size;
uint16_t vendor_id;
uint16_t product_id;
uint8_t do_unlock;
/* Protect scratch area */
do_unlock = usbd_ctrl_lock(udev);
temp_ptr = (char *)udev->scratch.data;
temp_size = sizeof(udev->scratch.data);
vendor_id = UGETW(udd->idVendor);
product_id = UGETW(udd->idProduct);
/* get serial number string */
usbd_req_get_string_any(udev, NULL, temp_ptr, temp_size,
udev->ddesc.iSerialNumber);
udev->serial = strdup(temp_ptr, M_USB);
/* get manufacturer string */
usbd_req_get_string_any(udev, NULL, temp_ptr, temp_size,
udev->ddesc.iManufacturer);
usb_trim_spaces(temp_ptr);
if (temp_ptr[0] != '\0')
udev->manufacturer = strdup(temp_ptr, M_USB);
/* get product string */
usbd_req_get_string_any(udev, NULL, temp_ptr, temp_size,
udev->ddesc.iProduct);
usb_trim_spaces(temp_ptr);
if (temp_ptr[0] != '\0')
udev->product = strdup(temp_ptr, M_USB);
#ifdef USB_VERBOSE
if (udev->manufacturer == NULL || udev->product == NULL) {
for (kdp = usb_knowndevs; kdp->vendorname != NULL; kdp++) {
if (kdp->vendor == vendor_id &&
(kdp->product == product_id ||
(kdp->flags & USB_KNOWNDEV_NOPROD) != 0))
break;
}
if (kdp->vendorname != NULL) {
/* XXX should use pointer to knowndevs string */
if (udev->manufacturer == NULL) {
udev->manufacturer = strdup(kdp->vendorname,
M_USB);
}
if (udev->product == NULL &&
(kdp->flags & USB_KNOWNDEV_NOPROD) == 0) {
udev->product = strdup(kdp->productname,
M_USB);
}
}
}
#endif
/* Provide default strings if none were found */
if (udev->manufacturer == NULL) {
snprintf(temp_ptr, temp_size, "vendor 0x%04x", vendor_id);
udev->manufacturer = strdup(temp_ptr, M_USB);
}
if (udev->product == NULL) {
snprintf(temp_ptr, temp_size, "product 0x%04x", product_id);
udev->product = strdup(temp_ptr, M_USB);
}
if (do_unlock)
usbd_ctrl_unlock(udev);
}
/*
* Returns:
* See: USB_MODE_XXX
*/
enum usb_hc_mode
usbd_get_mode(struct usb_device *udev)
{
return (udev->flags.usb_mode);
}
/*
* Returns:
* See: USB_SPEED_XXX
*/
enum usb_dev_speed
usbd_get_speed(struct usb_device *udev)
{
return (udev->speed);
}
uint32_t
usbd_get_isoc_fps(struct usb_device *udev)
{
; /* indent fix */
switch (udev->speed) {
case USB_SPEED_LOW:
case USB_SPEED_FULL:
return (1000);
default:
return (8000);
}
}
struct usb_device_descriptor *
usbd_get_device_descriptor(struct usb_device *udev)
{
if (udev == NULL)
return (NULL); /* be NULL safe */
return (&udev->ddesc);
}
struct usb_config_descriptor *
usbd_get_config_descriptor(struct usb_device *udev)
{
if (udev == NULL)
return (NULL); /* be NULL safe */
return (udev->cdesc);
}
/*------------------------------------------------------------------------*
* usb_test_quirk - test a device for a given quirk
*
* Return values:
* 0: The USB device does not have the given quirk.
* Else: The USB device has the given quirk.
*------------------------------------------------------------------------*/
uint8_t
usb_test_quirk(const struct usb_attach_arg *uaa, uint16_t quirk)
{
uint8_t found;
uint8_t x;
if (quirk == UQ_NONE)
return (0);
/* search the automatic per device quirks first */
for (x = 0; x != USB_MAX_AUTO_QUIRK; x++) {
if (uaa->device->autoQuirk[x] == quirk)
return (1);
}
/* search global quirk table, if any */
found = (usb_test_quirk_p) (&uaa->info, quirk);
return (found);
}
struct usb_interface_descriptor *
usbd_get_interface_descriptor(struct usb_interface *iface)
{
if (iface == NULL)
return (NULL); /* be NULL safe */
return (iface->idesc);
}
uint8_t
usbd_get_interface_altindex(struct usb_interface *iface)
{
return (iface->alt_index);
}
uint8_t
usbd_get_bus_index(struct usb_device *udev)
{
return ((uint8_t)device_get_unit(udev->bus->bdev));
}
uint8_t
usbd_get_device_index(struct usb_device *udev)
{
return (udev->device_index);
}
#if USB_HAVE_DEVCTL
static void
usb_notify_addq(const char *type, struct usb_device *udev)
{
struct usb_interface *iface;
struct sbuf *sb;
int i;
/* announce the device */
sb = sbuf_new_auto();
sbuf_printf(sb,
#if USB_HAVE_UGEN
"ugen=%s "
"cdev=%s "
#endif
"vendor=0x%04x "
"product=0x%04x "
"devclass=0x%02x "
"devsubclass=0x%02x "
"sernum=\"%s\" "
"release=0x%04x "
"mode=%s "
"port=%u "
#if USB_HAVE_UGEN
"parent=%s"
#endif
"",
#if USB_HAVE_UGEN
udev->ugen_name,
udev->ugen_name,
#endif
UGETW(udev->ddesc.idVendor),
UGETW(udev->ddesc.idProduct),
udev->ddesc.bDeviceClass,
udev->ddesc.bDeviceSubClass,
usb_get_serial(udev),
UGETW(udev->ddesc.bcdDevice),
(udev->flags.usb_mode == USB_MODE_HOST) ? "host" : "device",
udev->port_no
#if USB_HAVE_UGEN
, udev->parent_hub != NULL ?
udev->parent_hub->ugen_name :
device_get_nameunit(device_get_parent(udev->bus->bdev))
#endif
);
sbuf_finish(sb);
devctl_notify("USB", "DEVICE", type, sbuf_data(sb));
sbuf_delete(sb);
/* announce each interface */
for (i = 0; i < USB_IFACE_MAX; i++) {
iface = usbd_get_iface(udev, i);
if (iface == NULL)
break; /* end of interfaces */
if (iface->idesc == NULL)
continue; /* no interface descriptor */
sb = sbuf_new_auto();
sbuf_printf(sb,
#if USB_HAVE_UGEN
"ugen=%s "
"cdev=%s "
#endif
"vendor=0x%04x "
"product=0x%04x "
"devclass=0x%02x "
"devsubclass=0x%02x "
"sernum=\"%s\" "
"release=0x%04x "
"mode=%s "
"interface=%d "
"endpoints=%d "
"intclass=0x%02x "
"intsubclass=0x%02x "
"intprotocol=0x%02x",
#if USB_HAVE_UGEN
udev->ugen_name,
udev->ugen_name,
#endif
UGETW(udev->ddesc.idVendor),
UGETW(udev->ddesc.idProduct),
udev->ddesc.bDeviceClass,
udev->ddesc.bDeviceSubClass,
usb_get_serial(udev),
UGETW(udev->ddesc.bcdDevice),
(udev->flags.usb_mode == USB_MODE_HOST) ? "host" : "device",
iface->idesc->bInterfaceNumber,
iface->idesc->bNumEndpoints,
iface->idesc->bInterfaceClass,
iface->idesc->bInterfaceSubClass,
iface->idesc->bInterfaceProtocol);
sbuf_finish(sb);
devctl_notify("USB", "INTERFACE", type, sbuf_data(sb));
sbuf_delete(sb);
}
}
#endif
#if USB_HAVE_UGEN
/*------------------------------------------------------------------------*
* usb_fifo_free_wrap
*
* This function will free the FIFOs.
*
* Description of "flag" argument: If the USB_UNCFG_FLAG_FREE_EP0 flag
* is set and "iface_index" is set to "USB_IFACE_INDEX_ANY", we free
* all FIFOs. If the USB_UNCFG_FLAG_FREE_EP0 flag is not set and
* "iface_index" is set to "USB_IFACE_INDEX_ANY", we free all non
* control endpoint FIFOs. If "iface_index" is not set to
* "USB_IFACE_INDEX_ANY" the flag has no effect.
*------------------------------------------------------------------------*/
static void
usb_fifo_free_wrap(struct usb_device *udev,
uint8_t iface_index, uint8_t flag)
{
struct usb_fifo *f;
uint16_t i;
/*
* Free any USB FIFOs on the given interface:
*/
for (i = 0; i != USB_FIFO_MAX; i++) {
f = udev->fifo[i];
if (f == NULL) {
continue;
}
/* Check if the interface index matches */
if (iface_index == f->iface_index) {
if (f->methods != &usb_ugen_methods) {
/*
* Don't free any non-generic FIFOs in
* this case.
*/
continue;
}
if ((f->dev_ep_index == 0) &&
(f->fs_xfer == NULL)) {
/* no need to free this FIFO */
continue;
}
} else if (iface_index == USB_IFACE_INDEX_ANY) {
if ((f->methods == &usb_ugen_methods) &&
(f->dev_ep_index == 0) &&
(!(flag & USB_UNCFG_FLAG_FREE_EP0)) &&
(f->fs_xfer == NULL)) {
/* no need to free this FIFO */
continue;
}
} else {
/* no need to free this FIFO */
continue;
}
/* free this FIFO */
usb_fifo_free(f);
}
}
#endif
/*------------------------------------------------------------------------*
* usb_peer_can_wakeup
*
* Return values:
* 0: Peer cannot do resume signalling.
* Else: Peer can do resume signalling.
*------------------------------------------------------------------------*/
uint8_t
usb_peer_can_wakeup(struct usb_device *udev)
{
const struct usb_config_descriptor *cdp;
cdp = udev->cdesc;
if ((cdp != NULL) && (udev->flags.usb_mode == USB_MODE_HOST)) {
return (cdp->bmAttributes & UC_REMOTE_WAKEUP);
}
return (0); /* not supported */
}
void
usb_set_device_state(struct usb_device *udev, enum usb_dev_state state)
{
KASSERT(state < USB_STATE_MAX, ("invalid udev state"));
DPRINTF("udev %p state %s -> %s\n", udev,
usb_statestr(udev->state), usb_statestr(state));
#if USB_HAVE_UGEN
mtx_lock(&usb_ref_lock);
#endif
udev->state = state;
#if USB_HAVE_UGEN
mtx_unlock(&usb_ref_lock);
#endif
if (udev->bus->methods->device_state_change != NULL)
(udev->bus->methods->device_state_change) (udev);
}
enum usb_dev_state
usb_get_device_state(struct usb_device *udev)
{
if (udev == NULL)
return (USB_STATE_DETACHED);
return (udev->state);
}
uint8_t
usbd_device_attached(struct usb_device *udev)
{
return (udev->state > USB_STATE_DETACHED);
}
/*
* The following function locks enumerating the given USB device. If
* the lock is already grabbed this function returns zero. Else a
* a value of one is returned.
*/
uint8_t
usbd_enum_lock(struct usb_device *udev)
{
if (sx_xlocked(&udev->enum_sx))
return (0);
sx_xlock(&udev->enum_sx);
sx_xlock(&udev->sr_sx);
/*
* NEWBUS LOCK NOTE: We should check if any parent SX locks
* are locked before locking Giant. Else the lock can be
* locked multiple times.
*/
mtx_lock(&Giant);
return (1);
}
#if USB_HAVE_UGEN
/*
* This function is the same like usbd_enum_lock() except a value of
* 255 is returned when a signal is pending:
*/
uint8_t
usbd_enum_lock_sig(struct usb_device *udev)
{
if (sx_xlocked(&udev->enum_sx))
return (0);
if (sx_xlock_sig(&udev->enum_sx))
return (255);
if (sx_xlock_sig(&udev->sr_sx)) {
sx_xunlock(&udev->enum_sx);
return (255);
}
mtx_lock(&Giant);
return (1);
}
#endif
/* The following function unlocks enumerating the given USB device. */
void
usbd_enum_unlock(struct usb_device *udev)
{
mtx_unlock(&Giant);
sx_xunlock(&udev->enum_sx);
sx_xunlock(&udev->sr_sx);
}
/* The following function locks suspend and resume. */
void
usbd_sr_lock(struct usb_device *udev)
{
sx_xlock(&udev->sr_sx);
/*
* NEWBUS LOCK NOTE: We should check if any parent SX locks
* are locked before locking Giant. Else the lock can be
* locked multiple times.
*/
mtx_lock(&Giant);
}
/* The following function unlocks suspend and resume. */
void
usbd_sr_unlock(struct usb_device *udev)
{
mtx_unlock(&Giant);
sx_xunlock(&udev->sr_sx);
}
/*
* The following function checks the enumerating lock for the given
* USB device.
*/
uint8_t
usbd_enum_is_locked(struct usb_device *udev)
{
return (sx_xlocked(&udev->enum_sx));
}
/*
* The following function is used to serialize access to USB control
* transfers and the USB scratch area. If the lock is already grabbed
* this function returns zero. Else a value of one is returned.
*/
uint8_t
usbd_ctrl_lock(struct usb_device *udev)
{
if (sx_xlocked(&udev->ctrl_sx))
return (0);
sx_xlock(&udev->ctrl_sx);
/*
* We need to allow suspend and resume at this point, else the
* control transfer will timeout if the device is suspended!
*/
if (usbd_enum_is_locked(udev))
usbd_sr_unlock(udev);
return (1);
}
void
usbd_ctrl_unlock(struct usb_device *udev)
{
sx_xunlock(&udev->ctrl_sx);
/*
* Restore the suspend and resume lock after we have unlocked
* the USB control transfer lock to avoid LOR:
*/
if (usbd_enum_is_locked(udev))
usbd_sr_lock(udev);
}
/*
* The following function is used to set the per-interface specific
* plug and play information. The string referred to by the pnpinfo
* argument can safely be freed after calling this function. The
* pnpinfo of an interface will be reset at device detach or when
* passing a NULL argument to this function. This function
* returns zero on success, else a USB_ERR_XXX failure code.
*/
usb_error_t
usbd_set_pnpinfo(struct usb_device *udev, uint8_t iface_index, const char *pnpinfo)
{
struct usb_interface *iface;
iface = usbd_get_iface(udev, iface_index);
if (iface == NULL)
return (USB_ERR_INVAL);
if (iface->pnpinfo != NULL) {
free(iface->pnpinfo, M_USBDEV);
iface->pnpinfo = NULL;
}
if (pnpinfo == NULL || pnpinfo[0] == 0)
return (0); /* success */
iface->pnpinfo = strdup(pnpinfo, M_USBDEV);
if (iface->pnpinfo == NULL)
return (USB_ERR_NOMEM);
return (0); /* success */
}
usb_error_t
usbd_add_dynamic_quirk(struct usb_device *udev, uint16_t quirk)
{
uint8_t x;
for (x = 0; x != USB_MAX_AUTO_QUIRK; x++) {
if (udev->autoQuirk[x] == 0 ||
udev->autoQuirk[x] == quirk) {
udev->autoQuirk[x] = quirk;
return (0); /* success */
}
}
return (USB_ERR_NOMEM);
}
/*
* The following function is used to select the endpoint mode. It
* should not be called outside enumeration context.
*/
usb_error_t
usbd_set_endpoint_mode(struct usb_device *udev, struct usb_endpoint *ep,
uint8_t ep_mode)
{
usb_error_t error;
uint8_t do_unlock;
/* Prevent re-enumeration */
do_unlock = usbd_enum_lock(udev);
if (udev->bus->methods->set_endpoint_mode != NULL) {
error = (udev->bus->methods->set_endpoint_mode) (
udev, ep, ep_mode);
} else if (ep_mode != USB_EP_MODE_DEFAULT) {
error = USB_ERR_INVAL;
} else {
error = 0;
}
/* only set new mode regardless of error */
ep->ep_mode = ep_mode;
if (do_unlock)
usbd_enum_unlock(udev);
return (error);
}
uint8_t
usbd_get_endpoint_mode(struct usb_device *udev, struct usb_endpoint *ep)
{
return (ep->ep_mode);
}
Reference in New Issue View Git Blame Copy Permalink