3be4cb0b4a
changes: 01 - Enhanced LRO: LRO feature is extended to support multi-buffer mode. Previously, Ethernet frames received in contiguous buffers were offloaded. Now, frames received in multiple non-contiguous buffers can be offloaded, as well. The driver now supports LRO for jumbo frames. 02 - Locks Optimization: The driver code was re-organized to limit the use of locks. Moreover, lock contention was reduced by replacing wait locks with try locks. 03 - Code Optimization: The driver code was re-factored to eliminate some memcpy operations. Fast path loops were optimized. 04 - Tag Creations: Physical Buffer Tags are now optimized based upon frame size. For better performance, Physical Memory Maps are now re-used. 05 - Configuration: Features such as TSO, LRO, and Interrupt Mode can be configured either at load or at run time. Rx buffer mode (mode 1 or mode 2) can be configured at load time through kenv. 06 - Driver Statistics: Run time statistics are enhanced to provide better visibility into the driver performance. 07 - Bug Fixes: The driver contains fixes for the problems discovered and reported since last submission. 08 - MSI support: Added Message Signaled Interrupt feature which currently uses 1 message. 09 Removed feature: Rx 3 buffer mode feature has been removed. Driver now supports 1, 2 and 5 buffer modes of which 2 and 5 buffer modes can be used for header separation. 10 Compiler warning: Fixed compiler warning when compiled for 32 bit system. 11 Copyright notice: Source files are updated with the proper copyright notice. MFC after: 3 days Submitted by: Alicia Pena <Alicia dot Pena at neterion dot com>, Muhammad Shafiq <Muhammad dot Shafiq at neterion dot com>
466 lines
18 KiB
C
466 lines
18 KiB
C
/*-
|
|
* Copyright (c) 2002-2007 Neterion, Inc.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#ifndef XGE_HAL_RING_H
|
|
#define XGE_HAL_RING_H
|
|
|
|
#include <dev/nxge/include/xgehal-channel.h>
|
|
#include <dev/nxge/include/xgehal-config.h>
|
|
#include <dev/nxge/include/xgehal-mm.h>
|
|
|
|
__EXTERN_BEGIN_DECLS
|
|
|
|
/* HW ring configuration */
|
|
#define XGE_HAL_RING_RXDBLOCK_SIZE 0x1000
|
|
|
|
#define XGE_HAL_RXD_T_CODE_OK 0x0
|
|
#define XGE_HAL_RXD_T_CODE_PARITY 0x1
|
|
#define XGE_HAL_RXD_T_CODE_ABORT 0x2
|
|
#define XGE_HAL_RXD_T_CODE_PARITY_ABORT 0x3
|
|
#define XGE_HAL_RXD_T_CODE_RDA_FAILURE 0x4
|
|
#define XGE_HAL_RXD_T_CODE_UNKNOWN_PROTO 0x5
|
|
#define XGE_HAL_RXD_T_CODE_BAD_FCS 0x6
|
|
#define XGE_HAL_RXD_T_CODE_BUFF_SIZE 0x7
|
|
#define XGE_HAL_RXD_T_CODE_BAD_ECC 0x8
|
|
#define XGE_HAL_RXD_T_CODE_UNUSED_C 0xC
|
|
#define XGE_HAL_RXD_T_CODE_UNKNOWN 0xF
|
|
|
|
#define XGE_HAL_RING_USE_MTU -1
|
|
|
|
/* control_1 and control_2 formatting - same for all buffer modes */
|
|
#define XGE_HAL_RXD_GET_L3_CKSUM(control_1) ((u16)(control_1>>16) & 0xFFFF)
|
|
#define XGE_HAL_RXD_GET_L4_CKSUM(control_1) ((u16)(control_1 & 0xFFFF))
|
|
|
|
#define XGE_HAL_RXD_MASK_VLAN_TAG vBIT(0xFFFF,48,16)
|
|
#define XGE_HAL_RXD_SET_VLAN_TAG(control_2, val) control_2 |= (u16)val
|
|
#define XGE_HAL_RXD_GET_VLAN_TAG(control_2) ((u16)(control_2 & 0xFFFF))
|
|
|
|
#define XGE_HAL_RXD_POSTED_4_XFRAME BIT(7) /* control_1 */
|
|
#define XGE_HAL_RXD_NOT_COMPLETED BIT(0) /* control_2 */
|
|
#define XGE_HAL_RXD_T_CODE (BIT(12)|BIT(13)|BIT(14)|BIT(15))
|
|
#define XGE_HAL_RXD_GET_T_CODE(control_1) \
|
|
((control_1 & XGE_HAL_RXD_T_CODE)>>48)
|
|
#define XGE_HAL_RXD_SET_T_CODE(control_1, val) \
|
|
(control_1 |= (((u64)val & 0xF) << 48))
|
|
|
|
#define XGE_HAL_RXD_MASK_FRAME_TYPE vBIT(0x3,25,2)
|
|
#define XGE_HAL_RXD_MASK_FRAME_PROTO vBIT(0xFFFF,24,8)
|
|
#define XGE_HAL_RXD_GET_FRAME_TYPE(control_1) \
|
|
(u8)(0x3 & ((control_1 & XGE_HAL_RXD_MASK_FRAME_TYPE) >> 37))
|
|
#define XGE_HAL_RXD_GET_FRAME_PROTO(control_1) \
|
|
(u8)((control_1 & XGE_HAL_RXD_MASK_FRAME_PROTO) >> 32)
|
|
#define XGE_HAL_RXD_FRAME_PROTO_VLAN_TAGGED BIT(24)
|
|
#define XGE_HAL_RXD_FRAME_PROTO_IPV4 BIT(27)
|
|
#define XGE_HAL_RXD_FRAME_PROTO_IPV6 BIT(28)
|
|
#define XGE_HAL_RXD_FRAME_PROTO_IP_FRAGMENTED BIT(29)
|
|
#define XGE_HAL_RXD_FRAME_PROTO_TCP BIT(30)
|
|
#define XGE_HAL_RXD_FRAME_PROTO_UDP BIT(31)
|
|
#define XGE_HAL_RXD_FRAME_TCP_OR_UDP (XGE_HAL_RXD_FRAME_PROTO_TCP | \
|
|
XGE_HAL_RXD_FRAME_PROTO_UDP)
|
|
|
|
/**
|
|
* enum xge_hal_frame_type_e - Ethernet frame format.
|
|
* @XGE_HAL_FRAME_TYPE_DIX: DIX (Ethernet II) format.
|
|
* @XGE_HAL_FRAME_TYPE_LLC: LLC format.
|
|
* @XGE_HAL_FRAME_TYPE_SNAP: SNAP format.
|
|
* @XGE_HAL_FRAME_TYPE_IPX: IPX format.
|
|
*
|
|
* Ethernet frame format.
|
|
*/
|
|
typedef enum xge_hal_frame_type_e {
|
|
XGE_HAL_FRAME_TYPE_DIX = 0x0,
|
|
XGE_HAL_FRAME_TYPE_LLC = 0x1,
|
|
XGE_HAL_FRAME_TYPE_SNAP = 0x2,
|
|
XGE_HAL_FRAME_TYPE_IPX = 0x3,
|
|
} xge_hal_frame_type_e;
|
|
|
|
/**
|
|
* enum xge_hal_frame_proto_e - Higher-layer ethernet protocols.
|
|
* @XGE_HAL_FRAME_PROTO_VLAN_TAGGED: VLAN.
|
|
* @XGE_HAL_FRAME_PROTO_IPV4: IPv4.
|
|
* @XGE_HAL_FRAME_PROTO_IPV6: IPv6.
|
|
* @XGE_HAL_FRAME_PROTO_IP_FRAGMENTED: IP fragmented.
|
|
* @XGE_HAL_FRAME_PROTO_TCP: TCP.
|
|
* @XGE_HAL_FRAME_PROTO_UDP: UDP.
|
|
* @XGE_HAL_FRAME_PROTO_TCP_OR_UDP: TCP or UDP.
|
|
*
|
|
* Higher layer ethernet protocols and options.
|
|
*/
|
|
typedef enum xge_hal_frame_proto_e {
|
|
XGE_HAL_FRAME_PROTO_VLAN_TAGGED = 0x80,
|
|
XGE_HAL_FRAME_PROTO_IPV4 = 0x10,
|
|
XGE_HAL_FRAME_PROTO_IPV6 = 0x08,
|
|
XGE_HAL_FRAME_PROTO_IP_FRAGMENTED = 0x04,
|
|
XGE_HAL_FRAME_PROTO_TCP = 0x02,
|
|
XGE_HAL_FRAME_PROTO_UDP = 0x01,
|
|
XGE_HAL_FRAME_PROTO_TCP_OR_UDP = (XGE_HAL_FRAME_PROTO_TCP | \
|
|
XGE_HAL_FRAME_PROTO_UDP)
|
|
} xge_hal_frame_proto_e;
|
|
|
|
/*
|
|
* xge_hal_ring_rxd_1_t
|
|
*/
|
|
typedef struct {
|
|
u64 host_control;
|
|
u64 control_1;
|
|
u64 control_2;
|
|
#define XGE_HAL_RXD_1_MASK_BUFFER0_SIZE vBIT(0xFFFF,0,16)
|
|
#define XGE_HAL_RXD_1_SET_BUFFER0_SIZE(val) vBIT(val,0,16)
|
|
#define XGE_HAL_RXD_1_GET_BUFFER0_SIZE(Control_2) \
|
|
(int)((Control_2 & vBIT(0xFFFF,0,16))>>48)
|
|
#define XGE_HAL_RXD_1_GET_RTH_VALUE(Control_2) \
|
|
(u32)((Control_2 & vBIT(0xFFFFFFFF,16,32))>>16)
|
|
u64 buffer0_ptr;
|
|
} xge_hal_ring_rxd_1_t;
|
|
|
|
/*
|
|
* xge_hal_ring_rxd_3_t
|
|
*/
|
|
typedef struct {
|
|
u64 host_control;
|
|
u64 control_1;
|
|
|
|
u64 control_2;
|
|
#define XGE_HAL_RXD_3_MASK_BUFFER0_SIZE vBIT(0xFF,8,8)
|
|
#define XGE_HAL_RXD_3_SET_BUFFER0_SIZE(val) vBIT(val,8,8)
|
|
#define XGE_HAL_RXD_3_MASK_BUFFER1_SIZE vBIT(0xFFFF,16,16)
|
|
#define XGE_HAL_RXD_3_SET_BUFFER1_SIZE(val) vBIT(val,16,16)
|
|
#define XGE_HAL_RXD_3_MASK_BUFFER2_SIZE vBIT(0xFFFF,32,16)
|
|
#define XGE_HAL_RXD_3_SET_BUFFER2_SIZE(val) vBIT(val,32,16)
|
|
|
|
|
|
#define XGE_HAL_RXD_3_GET_BUFFER0_SIZE(Control_2) \
|
|
(int)((Control_2 & vBIT(0xFF,8,8))>>48)
|
|
#define XGE_HAL_RXD_3_GET_BUFFER1_SIZE(Control_2) \
|
|
(int)((Control_2 & vBIT(0xFFFF,16,16))>>32)
|
|
#define XGE_HAL_RXD_3_GET_BUFFER2_SIZE(Control_2) \
|
|
(int)((Control_2 & vBIT(0xFFFF,32,16))>>16)
|
|
|
|
u64 buffer0_ptr;
|
|
u64 buffer1_ptr;
|
|
u64 buffer2_ptr;
|
|
} xge_hal_ring_rxd_3_t;
|
|
|
|
/*
|
|
* xge_hal_ring_rxd_5_t
|
|
*/
|
|
typedef struct {
|
|
#ifdef XGE_OS_HOST_BIG_ENDIAN
|
|
u32 host_control;
|
|
u32 control_3;
|
|
#else
|
|
u32 control_3;
|
|
u32 host_control;
|
|
#endif
|
|
|
|
|
|
#define XGE_HAL_RXD_5_MASK_BUFFER3_SIZE vBIT(0xFFFF,32,16)
|
|
#define XGE_HAL_RXD_5_SET_BUFFER3_SIZE(val) vBIT(val,32,16)
|
|
#define XGE_HAL_RXD_5_MASK_BUFFER4_SIZE vBIT(0xFFFF,48,16)
|
|
#define XGE_HAL_RXD_5_SET_BUFFER4_SIZE(val) vBIT(val,48,16)
|
|
|
|
#define XGE_HAL_RXD_5_GET_BUFFER3_SIZE(Control_3) \
|
|
(int)((Control_3 & vBIT(0xFFFF,32,16))>>16)
|
|
#define XGE_HAL_RXD_5_GET_BUFFER4_SIZE(Control_3) \
|
|
(int)((Control_3 & vBIT(0xFFFF,48,16)))
|
|
|
|
u64 control_1;
|
|
u64 control_2;
|
|
|
|
#define XGE_HAL_RXD_5_MASK_BUFFER0_SIZE vBIT(0xFFFF,0,16)
|
|
#define XGE_HAL_RXD_5_SET_BUFFER0_SIZE(val) vBIT(val,0,16)
|
|
#define XGE_HAL_RXD_5_MASK_BUFFER1_SIZE vBIT(0xFFFF,16,16)
|
|
#define XGE_HAL_RXD_5_SET_BUFFER1_SIZE(val) vBIT(val,16,16)
|
|
#define XGE_HAL_RXD_5_MASK_BUFFER2_SIZE vBIT(0xFFFF,32,16)
|
|
#define XGE_HAL_RXD_5_SET_BUFFER2_SIZE(val) vBIT(val,32,16)
|
|
|
|
|
|
#define XGE_HAL_RXD_5_GET_BUFFER0_SIZE(Control_2) \
|
|
(int)((Control_2 & vBIT(0xFFFF,0,16))>>48)
|
|
#define XGE_HAL_RXD_5_GET_BUFFER1_SIZE(Control_2) \
|
|
(int)((Control_2 & vBIT(0xFFFF,16,16))>>32)
|
|
#define XGE_HAL_RXD_5_GET_BUFFER2_SIZE(Control_2) \
|
|
(int)((Control_2 & vBIT(0xFFFF,32,16))>>16)
|
|
u64 buffer0_ptr;
|
|
u64 buffer1_ptr;
|
|
u64 buffer2_ptr;
|
|
u64 buffer3_ptr;
|
|
u64 buffer4_ptr;
|
|
} xge_hal_ring_rxd_5_t;
|
|
|
|
#define XGE_HAL_RXD_GET_RTH_SPDM_HIT(Control_1) \
|
|
(u8)((Control_1 & BIT(18))>>45)
|
|
#define XGE_HAL_RXD_GET_RTH_IT_HIT(Control_1) \
|
|
(u8)((Control_1 & BIT(19))>>44)
|
|
#define XGE_HAL_RXD_GET_RTH_HASH_TYPE(Control_1) \
|
|
(u8)((Control_1 & vBIT(0xF,20,4))>>40)
|
|
|
|
#define XGE_HAL_RXD_HASH_TYPE_NONE 0x0
|
|
#define XGE_HAL_RXD_HASH_TYPE_TCP_IPV4 0x1
|
|
#define XGE_HAL_RXD_HASH_TYPE_UDP_IPV4 0x2
|
|
#define XGE_HAL_RXD_HASH_TYPE_IPV4 0x3
|
|
#define XGE_HAL_RXD_HASH_TYPE_TCP_IPV6 0x4
|
|
#define XGE_HAL_RXD_HASH_TYPE_UDP_IPV6 0x5
|
|
#define XGE_HAL_RXD_HASH_TYPE_IPV6 0x6
|
|
#define XGE_HAL_RXD_HASH_TYPE_TCP_IPV6_EX 0x7
|
|
#define XGE_HAL_RXD_HASH_TYPE_UDP_IPV6_EX 0x8
|
|
#define XGE_HAL_RXD_HASH_TYPE_IPV6_EX 0x9
|
|
|
|
typedef u8 xge_hal_ring_block_t[XGE_HAL_RING_RXDBLOCK_SIZE];
|
|
|
|
#define XGE_HAL_RING_NEXT_BLOCK_POINTER_OFFSET 0xFF8
|
|
#define XGE_HAL_RING_MEMBLOCK_IDX_OFFSET 0xFF0
|
|
|
|
#define XGE_HAL_RING_RXD_SIZEOF(n) \
|
|
(n==1 ? sizeof(xge_hal_ring_rxd_1_t) : \
|
|
(n==3 ? sizeof(xge_hal_ring_rxd_3_t) : \
|
|
sizeof(xge_hal_ring_rxd_5_t)))
|
|
|
|
#define XGE_HAL_RING_RXDS_PER_BLOCK(n) \
|
|
(n==1 ? 127 : (n==3 ? 85 : 63))
|
|
|
|
/**
|
|
* struct xge_hal_ring_rxd_priv_t - Receive descriptor HAL-private data.
|
|
* @dma_addr: DMA (mapped) address of _this_ descriptor.
|
|
* @dma_handle: DMA handle used to map the descriptor onto device.
|
|
* @dma_offset: Descriptor's offset in the memory block. HAL allocates
|
|
* descriptors in memory blocks of
|
|
* %XGE_HAL_RING_RXDBLOCK_SIZE
|
|
* bytes. Each memblock is contiguous DMA-able memory. Each
|
|
* memblock contains 1 or more 4KB RxD blocks visible to the
|
|
* Xframe hardware.
|
|
* @dma_object: DMA address and handle of the memory block that contains
|
|
* the descriptor. This member is used only in the "checked"
|
|
* version of the HAL (to enforce certain assertions);
|
|
* otherwise it gets compiled out.
|
|
* @allocated: True if the descriptor is reserved, 0 otherwise. Internal usage.
|
|
*
|
|
* Per-receive decsriptor HAL-private data. HAL uses the space to keep DMA
|
|
* information associated with the descriptor. Note that ULD can ask HAL
|
|
* to allocate additional per-descriptor space for its own (ULD-specific)
|
|
* purposes.
|
|
*/
|
|
typedef struct xge_hal_ring_rxd_priv_t {
|
|
dma_addr_t dma_addr;
|
|
pci_dma_h dma_handle;
|
|
ptrdiff_t dma_offset;
|
|
#ifdef XGE_DEBUG_ASSERT
|
|
xge_hal_mempool_dma_t *dma_object;
|
|
#endif
|
|
#ifdef XGE_OS_MEMORY_CHECK
|
|
int allocated;
|
|
#endif
|
|
} xge_hal_ring_rxd_priv_t;
|
|
|
|
/**
|
|
* struct xge_hal_ring_t - Ring channel.
|
|
* @channel: Channel "base" of this ring, the common part of all HAL
|
|
* channels.
|
|
* @buffer_mode: 1, 3, or 5. The value specifies a receive buffer mode,
|
|
* as per Xframe User Guide.
|
|
* @indicate_max_pkts: Maximum number of packets processed within a single
|
|
* interrupt. Can be used to limit the time spent inside hw
|
|
* interrupt.
|
|
* @config: Ring configuration, part of device configuration
|
|
* (see xge_hal_device_config_t{}).
|
|
* @rxd_size: RxD sizes for 1-, 3- or 5- buffer modes. As per Xframe spec,
|
|
* 1-buffer mode descriptor is 32 byte long, etc.
|
|
* @rxd_priv_size: Per RxD size reserved (by HAL) for ULD to keep per-descriptor
|
|
* data (e.g., DMA handle for Solaris)
|
|
* @rxds_per_block: Number of descriptors per hardware-defined RxD
|
|
* block. Depends on the (1-,3-,5-) buffer mode.
|
|
* @mempool: Memory pool, the pool from which descriptors get allocated.
|
|
* (See xge_hal_mm.h).
|
|
* @rxdblock_priv_size: Reserved at the end of each RxD block. HAL internal
|
|
* usage. Not to confuse with @rxd_priv_size.
|
|
* @reserved_rxds_arr: Array of RxD pointers. At any point in time each
|
|
* entry in this array is available for allocation
|
|
* (via xge_hal_ring_dtr_reserve()) and posting.
|
|
* @cmpl_cnt: Completion counter. Is reset to zero upon entering the ISR.
|
|
* Used in conjunction with @indicate_max_pkts.
|
|
* Ring channel.
|
|
*
|
|
* Note: The structure is cache line aligned to better utilize
|
|
* CPU cache performance.
|
|
*/
|
|
typedef struct xge_hal_ring_t {
|
|
xge_hal_channel_t channel;
|
|
int buffer_mode;
|
|
int indicate_max_pkts;
|
|
xge_hal_ring_config_t *config;
|
|
int rxd_size;
|
|
int rxd_priv_size;
|
|
int rxds_per_block;
|
|
xge_hal_mempool_t *mempool;
|
|
int rxdblock_priv_size;
|
|
void **reserved_rxds_arr;
|
|
int cmpl_cnt;
|
|
} __xge_os_attr_cacheline_aligned xge_hal_ring_t;
|
|
|
|
/**
|
|
* struct xge_hal_dtr_info_t - Extended information associated with a
|
|
* completed ring descriptor.
|
|
* @l3_cksum: Result of IP checksum check (by Xframe hardware).
|
|
* This field containing XGE_HAL_L3_CKSUM_OK would mean that
|
|
* the checksum is correct, otherwise - the datagram is
|
|
* corrupted.
|
|
* @l4_cksum: Result of TCP/UDP checksum check (by Xframe hardware).
|
|
* This field containing XGE_HAL_L4_CKSUM_OK would mean that
|
|
* the checksum is correct. Otherwise - the packet is
|
|
* corrupted.
|
|
* @frame: See xge_hal_frame_type_e{}.
|
|
* @proto: Reporting bits for various higher-layer protocols, including (but
|
|
* note restricted to) TCP and UDP. See xge_hal_frame_proto_e{}.
|
|
* @vlan: VLAN tag extracted from the received frame.
|
|
* @rth_value: Receive Traffic Hashing(RTH) hash value. Produced by Xframe II
|
|
* hardware if RTH is enabled.
|
|
* @rth_it_hit: Set, If RTH hash value calculated by the Xframe II hardware
|
|
* has a matching entry in the Indirection table.
|
|
* @rth_spdm_hit: Set, If RTH hash value calculated by the Xframe II hardware
|
|
* has a matching entry in the Socket Pair Direct Match table.
|
|
* @rth_hash_type: RTH hash code of the function used to calculate the hash.
|
|
* @reserved_pad: Unused byte.
|
|
*/
|
|
typedef struct xge_hal_dtr_info_t {
|
|
int l3_cksum;
|
|
int l4_cksum;
|
|
int frame; /* zero or more of xge_hal_frame_type_e flags */
|
|
int proto; /* zero or more of xge_hal_frame_proto_e flags */
|
|
int vlan;
|
|
u32 rth_value;
|
|
u8 rth_it_hit;
|
|
u8 rth_spdm_hit;
|
|
u8 rth_hash_type;
|
|
u8 reserved_pad;
|
|
} xge_hal_dtr_info_t;
|
|
|
|
/* ========================== RING PRIVATE API ============================ */
|
|
|
|
xge_hal_status_e __hal_ring_open(xge_hal_channel_h channelh,
|
|
xge_hal_channel_attr_t *attr);
|
|
|
|
void __hal_ring_close(xge_hal_channel_h channelh);
|
|
|
|
void __hal_ring_hw_initialize(xge_hal_device_h devh);
|
|
|
|
void __hal_ring_mtu_set(xge_hal_device_h devh, int new_mtu);
|
|
|
|
void __hal_ring_prc_enable(xge_hal_channel_h channelh);
|
|
|
|
void __hal_ring_prc_disable(xge_hal_channel_h channelh);
|
|
|
|
xge_hal_status_e __hal_ring_initial_replenish(xge_hal_channel_t *channel,
|
|
xge_hal_channel_reopen_e reopen);
|
|
|
|
#if defined(XGE_DEBUG_FP) && (XGE_DEBUG_FP & XGE_DEBUG_FP_RING)
|
|
#define __HAL_STATIC_RING
|
|
#define __HAL_INLINE_RING
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING int
|
|
__hal_ring_block_memblock_idx(xge_hal_ring_block_t *block);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING void
|
|
__hal_ring_block_memblock_idx_set(xge_hal_ring_block_t*block, int memblock_idx);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING dma_addr_t
|
|
__hal_ring_block_next_pointer(xge_hal_ring_block_t *block);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING void
|
|
__hal_ring_block_next_pointer_set(xge_hal_ring_block_t*block,
|
|
dma_addr_t dma_next);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING xge_hal_ring_rxd_priv_t*
|
|
__hal_ring_rxd_priv(xge_hal_ring_t *ring, xge_hal_dtr_h dtrh);
|
|
|
|
/* =========================== RING PUBLIC API ============================ */
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING xge_hal_status_e
|
|
xge_hal_ring_dtr_reserve(xge_hal_channel_h channelh, xge_hal_dtr_h *dtrh);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING void*
|
|
xge_hal_ring_dtr_private(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING void
|
|
xge_hal_ring_dtr_1b_set(xge_hal_dtr_h dtrh, dma_addr_t dma_pointer, int size);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING void
|
|
xge_hal_ring_dtr_info_get(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh,
|
|
xge_hal_dtr_info_t *ext_info);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING void
|
|
xge_hal_ring_dtr_1b_get(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh,
|
|
dma_addr_t *dma_pointer, int *pkt_length);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING void
|
|
xge_hal_ring_dtr_3b_set(xge_hal_dtr_h dtrh, dma_addr_t dma_pointers[],
|
|
int sizes[]);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING void
|
|
xge_hal_ring_dtr_3b_get(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh,
|
|
dma_addr_t dma_pointers[], int sizes[]);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING void
|
|
xge_hal_ring_dtr_5b_set(xge_hal_dtr_h dtrh, dma_addr_t dma_pointers[],
|
|
int sizes[]);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING void
|
|
xge_hal_ring_dtr_5b_get(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh,
|
|
dma_addr_t dma_pointer[], int sizes[]);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING void
|
|
xge_hal_ring_dtr_post(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING void
|
|
xge_hal_ring_dtr_pre_post(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING void
|
|
xge_hal_ring_dtr_post_post(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING void
|
|
xge_hal_ring_dtr_post_post_wmb(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING xge_hal_status_e
|
|
xge_hal_ring_dtr_next_completed(xge_hal_channel_h channelh, xge_hal_dtr_h *dtrh,
|
|
u8 *t_code);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING void
|
|
xge_hal_ring_dtr_free(xge_hal_channel_h channelh, xge_hal_dtr_h dtrh);
|
|
|
|
__HAL_STATIC_RING __HAL_INLINE_RING xge_hal_status_e
|
|
xge_hal_ring_is_next_dtr_completed(xge_hal_channel_h channelh);
|
|
|
|
#else /* XGE_FASTPATH_EXTERN */
|
|
#define __HAL_STATIC_RING static
|
|
#define __HAL_INLINE_RING inline
|
|
#include <dev/nxge/xgehal/xgehal-ring-fp.c>
|
|
#endif /* XGE_FASTPATH_INLINE */
|
|
|
|
__EXTERN_END_DECLS
|
|
|
|
#endif /* XGE_HAL_RING_H */
|