c88fa71928
all public firmwares for all chips since the last release (1.15.37.0) follows (it's a straight copy-paste from the Release Notes for the 12/30/2016 Unified Wire release on Chelsio's website). T6 Firmware ++++++++++++ Version : 1.16.26.0 Date : 12/28/2016 Fixes ----- BASE: - Max number of egress and control queues adjusted to accomodate co-processor mode queues. - Fixed intermittent DDR3/4 ECC errors. - Fixed a traffic stall when ETS BW is configured as 0%. - Max number of ethctrl queue in VF set to 1. ETH: - Added a new config file option 'speed' under port section to set the port speed. Use only when auto negotiation is off. - FEC option removed from firmware config file. cxgbtool can be used to change the fec setting. - CPL_TX_TNL_LSO cpl handling added in ETH_TX_PKT_VM handler. This fixes large tunnel tcp packet support for VxLAN. Version : 1.16.22.0 Date : 12/05/2016 Fixes ----- BASE: - fw_port_type updated in fw API to match kernel.org definitions. - Saved power by disaling unused MAC lanes. - Configures correct power bin. - Enhanced DDR4 performance. - Enabled interrupts. - Fixed an issue where filter rule for 'unicast hash' is not working. ETH: - Disabled auto negotiation by default because most of 100G switches do not support AN as of today. - Fixed flow control not getting disabled problem. - Fixed an issue where port0 doesn't come up sometimes. - Fixed 10G link not coming up issue. - Fixed an issue with promiscuous mode when dcbx disabled. OFLD: - Fixed a connection stuck issue when abort is received during out of tx pages backpressure. ENHANCEMENTS ------------ BASE: - Added inline TLS mode support. Version : 1.16.12.0 Date : 11/11/2016 ENHANCEMENTS ------------ BASE: - Added T6 support. - Added T6 1G/10G/25G/40G/100G link speeds. - Added T6 co-processor mode crypto support. - Added facility to increase link AN+AEC timeout. OFLD: - Added support for all T5 offload protocols except FCoE. iSCSI: - iscsi completion moderation enabled. ======================================================================= T5 Firmware ++++++++++++ Version : 1.16.26.0 Date : 12/28/2016 FIXES ----- BASE: - Max number of ethctrl queue in VF set to 1. Version : 1.16.22.0 Date : 12/05/2016 FIXES ----- BASE: - Fixed an issue where filter rule for 'unicast hash' is not working. ETH: - Fixed an issue with promiscuous mode when dcbx disabled. ENHANCEMENTS ------------ ETH: - Added 40G-KR support. Version : 1.16.12.0 Date : 11/11/2016 FIXES ----- BASE: - Fixed multiple issues related with VFs FLR processing. - Fixed channel assignment based on number of ports in adapter. - Fixed a crash when VM having PF assigned as passthrough mode is rebooted. - Handled 2nd HELLO command from the same PF without seeing BYE from the same PF and if that is the only PF. - A warning is printed in firmware log if PCI-E cookie generation is enabled in serial initialization file. - Fixed multiple issues related with Filtering. - Enabled DSGL memory write for iscsi and rdma. - Added new FW_PARAMS_CMD[DEV] options to retrieve Serial Configuration and VPD version numbers. - Fixed an issue where LVDS output was not getting enabled using vpd. DCBX: - Fixed DCBX CEE Incorrect class to pririty mapping. - Fixed incorrect interpretation of DCBX IEEE PFC. ETH: - Adjusted the link related delay timings according to the QSFP spec. - Improved 40G link bringup time with few switches. OFLD: - Do not reserve qp/cq if rdma capability is not enabled. - Fixed an issue where approx 1600+ TOE connections were causing a firmware fatal error. FOiSCSI: - Fixed an issue where unloading foiscsi driver causes mailbox timeout. ENHANCEMENTS ------------ BASE: - Added 10G KR/KX support. - Added T540-BT adapter support. - Added 4 new rss key modes for PFs and VFs. OFLD: - Added new WR FW_RI_FR_NSMR_TPTE_WR to improve fast MR write performance in RDMA. Version : 1.16.5.0 Date : 10/26/2016 FIXES ----- BASE: - Fixed multiple issues where FLR from multiple VFs can cause firmware crash. - Fixed channel assignment based on number of ports in adapter. - Fixed the HELLO command master force api to handle the 2nd HELLO correctly without getting BYE from the PF driver. - Added facility to retrieve Serial configuration and VPD version. Two new FW_PARAMS_CMD[DEV] options added to retrieve these values. - Fixed multiple issues where FLR from multiple VFs are not completing. - Added new RSS hash secret key modes. - Fixed an issue where LVDS output was not getting enabled using vpd. DCBX: - Fixed an issue where iscsi tlv is sent incorrectly to host (DCBX CEE). - Fixed an issue where app priority values are not handled correctly in fw (DCBX IEEE). ETH: - Adjusts the link related delay timings according to the QSFP spec. - Changed 2.5G mac speed bit to 25G mac speed bit in fw API. - Improvement in 40G link bringup time with few switches. OFLD: - Do not reserve qp/cq if rdma capability is not enabled. - Fixed an issue where approx 1600+ TOE connections were causing a firmware fatal error. - Fixed DSGL memory write in T5. Now iwarp and iscsi can use DSGL to do memory write. - Fixed multiple issues in hash filter mode where incorrect protocol mask was getting used and affecting hash filter functionality. - New fastpath WR FW_RI_FR_NSMR_TPTE_WR (with fully populated TPTE) is added for small REG_MR operations. FOiSCSI: - Fixed an issue in foiscsi recovery path. - Fixed an issue where foiscsi (in VM in PCIE passthrough mode) didn't come up after VM FLR. ENHANCEMENTS ------------ ETH: - Implemented 1G/10G KR/KX ability. - Implemented T540-BT adapter support. ======================================================================= T4 Firmware +++++++++++ Version : 1.16.12.0 Date : 11/11/2016 FIXES ----- BASE: - Fixed an issue where reading temperature sesors using ldst command causes mailbox timeout. - Added new FW_PARAMS_CMD[DEV] options to retrieve Serial Configuration and VPD version numbers. ETH: - Fixed DCBX CEE Incorrect class to pririty mapping. FOiSCSI: - Fixed an issue where unloading foiscsi driver causes mailbox timeout. MFC after: 3 days Sponsored by: Chelsio Communications |
||
|---|---|---|
| .. | ||
| Makefile | ||