freebsd-dev/sys/dev/mii/lxtphyreg.h
2010-03-03 17:55:51 +00:00

84 lines
3.6 KiB
C

/* OpenBSD: lxtphyreg.h,v 1.1 1998/11/11 19:34:47 jason Exp */
/* NetBSD: lxtphyreg.h,v 1.1 1998/10/24 00:33:17 thorpej Exp */
/* $FreeBSD$ */
/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Jason R. Thorpe of the Numerical Aerospace Simulation Facility,
* NASA Ames Research Center.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _DEV_MII_LXTPHYREG_H_
#define _DEV_MII_LXTPHYREG_H_
/*
* LXT970 registers.
*/
#define MII_LXTPHY_MIRROR 0x10 /* Mirror register */
/* All bits user-defined */
#define MII_LXTPHY_IER 0x11 /* Interrupt Enable Register */
#define IER_MIIDRVLVL 0x0008 /* Rediced MII driver levels */
#define IER_LNK_CRITERIA 0x0004 /* Enhanced Link Loss Criteria */
#define IER_INTEN 0x0002 /* Interrupt Enable */
#define IER_TINT 0x0001 /* Force Interrupt */
#define MII_LXTPHY_ISR 0x12 /* Interrupt Status Register */
#define ISR_MINT 0x8000 /* MII Interrupt Pending */
#define ISR_XTALOK 0x4000 /* Clocks OK */
#define MII_LXTPHY_CONFIG 0x13 /* Configuration Register */
#define CONFIG_TXMIT_TEST 0x4000 /* 100base-T Transmit Test */
#define CONFIG_REPEATER 0x2000 /* Repeater Mode */
#define CONFIG_MDIO_INT 0x1000 /* Enable intr signalling on MDIO */
#define CONFIG_TPLOOP 0x0800 /* Disable 10base-T Loopback */
#define CONFIG_SQE 0x0400 /* Enable SQE */
#define CONFIG_DISJABBER 0x0200 /* Disable Jabber */
#define CONFIG_DISLINKTEST 0x0100 /* Disable Link Test */
#define CONFIG_LEDC1 0x0080 /* LEDC configuration */
#define CONFIG_LEDC0 0x0040 /* ... */
/* 0 0 LEDC indicates collision */
/* 0 1 LEDC is off */
/* 1 0 LEDC indicates activity */
/* 1 1 LEDC is on */
#define CONFIG_ADVTXCLK 0x0020 /* Advance TX clock */
#define CONFIG_5BSYMBOL 0x0010 /* 5-bit Symbol mode */
#define CONFIG_SCRAMBLER 0x0008 /* Bypass scrambler */
#define CONFIG_100BASEFX 0x0004 /* 100base-FX */
#define CONFIG_TXDISCON 0x0001 /* Disconnect TP transmitter */
#define MII_LXTPHY_CSR 0x14 /* Chip Status Register */
#define CSR_LINK 0x2000 /* Link is up */
#define CSR_DUPLEX 0x1000 /* Full-duplex */
#define CSR_SPEED 0x0800 /* 100Mbps */
#define CSR_ACOMP 0x0400 /* Autonegotiation complete */
#define CSR_PAGERCVD 0x0200 /* Link page received */
#define CSR_LOWVCC 0x0004 /* Low Voltage Fault */
#endif /* _DEV_MII_LXTPHYREG_H_ */