freebsd-dev/sys/powerpc/ps3/if_glcreg.h
Nathan Whitehorn 03479763b2 Import support for the Sony Playstation 3 using the OtherOS feature
available on firmwares 3.15 and earlier.

Caveats: Support for the internal SATA controller is currently missing,
as is support for framebuffer resolutions other than 720x480. These
deficiencies will be remedied soon.

Special thanks to Peter Grehan for providing the hardware that made this
port possible, and thanks to Geoff Levand of Sony Computer Entertainment
for advice on the LV1 hypervisor.
2011-01-06 04:12:29 +00:00

161 lines
4.7 KiB
C

/*-
* Copyright (C) 2010 Nathan Whitehorn
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _POWERPC_PS3_IF_GLCREG_H
#define _POWERPC_PS3_IF_GLCREG_H
#define GLC_MAX_TX_PACKETS 128
#define GLC_MAX_RX_PACKETS 128
struct glc_dmadesc;
/*
* software state for transmit job mbufs (may be elements of mbuf chains)
*/
struct glc_txsoft {
struct mbuf *txs_mbuf; /* head of our mbuf chain */
bus_dmamap_t txs_dmamap; /* our DMA map */
int txs_firstdesc; /* first descriptor in packet */
int txs_lastdesc; /* last descriptor in packet */
int txs_ndescs; /* number of descriptors */
STAILQ_ENTRY(glc_txsoft) txs_q;
};
STAILQ_HEAD(glc_txsq, glc_txsoft);
/*
* software state for receive jobs
*/
struct glc_rxsoft {
struct mbuf *rxs_mbuf; /* head of our mbuf chain */
bus_dmamap_t rxs_dmamap; /* our DMA map */
int rxs_desc_slot; /* DMA descriptor for this packet */
bus_addr_t rxs_desc;
bus_dma_segment_t segment;
};
struct glc_softc {
struct ifnet *sc_ifp;
device_t sc_self;
struct mtx sc_mtx;
u_char sc_enaddr[ETHER_ADDR_LEN];
int sc_tx_vlan, sc_rx_vlan;
int sc_ifpflags;
uint64_t sc_dma_base[5];
bus_dma_tag_t sc_dmadesc_tag;
int sc_irqid;
struct resource *sc_irq;
void *sc_irqctx;
uint64_t *sc_hwirq_status;
volatile uint64_t sc_interrupt_status;
struct ifmedia sc_media;
/* Transmission */
bus_dma_tag_t sc_txdma_tag;
struct glc_txsoft sc_txsoft[GLC_MAX_TX_PACKETS];
struct glc_dmadesc *sc_txdmadesc;
int next_txdma_slot, first_used_txdma_slot, bsy_txdma_slots;
bus_dmamap_t sc_txdmadesc_map;
bus_addr_t sc_txdmadesc_phys;
struct glc_txsq sc_txfreeq;
struct glc_txsq sc_txdirtyq;
/* Reception */
bus_dma_tag_t sc_rxdma_tag;
struct glc_rxsoft sc_rxsoft[GLC_MAX_RX_PACKETS];
struct glc_dmadesc *sc_rxdmadesc;
int sc_next_rxdma_slot;
bus_dmamap_t sc_rxdmadesc_map;
bus_addr_t sc_rxdmadesc_phys;
int sc_bus, sc_dev;
int sc_wdog_timer;
struct callout sc_tick_ch;
};
#define GELIC_GET_MAC_ADDRESS 0x0001
#define GELIC_GET_LINK_STATUS 0x0002
#define GELIC_SET_LINK_MODE 0x0003
#define GELIC_LINK_UP 0x0001
#define GELIC_FULL_DUPLEX 0x0002
#define GELIC_AUTO_NEG 0x0004
#define GELIC_SPEED_10 0x0010
#define GELIC_SPEED_100 0x0020
#define GELIC_SPEED_1000 0x0040
#define GELIC_GET_VLAN_ID 0x0004
#define GELIC_VLAN_TX_ETHERNET 0x0002
#define GELIC_VLAN_RX_ETHERNET 0x0012
#define GELIC_VLAN_TX_WIRELESS 0x0003
#define GELIC_VLAN_RX_WIRELESS 0x0013
/* Command status code */
#define GELIC_DESCR_OWNED 0xa0000000
#define GELIC_CMDSTAT_DMA_DONE 0x00000000
#define GELIC_CMDSTAT_CHAIN_END 0x00000002
#define GELIC_CMDSTAT_CSUM_TCP 0x00020000
#define GELIC_CMDSTAT_CSUM_UDP 0x00030000
#define GELIC_CMDSTAT_NOIPSEC 0x00080000
#define GELIC_CMDSTAT_LAST 0x00040000
#define GELIC_RXERRORS 0x7def8000
/* RX Data Status codes */
#define GELIC_RX_IPCSUM 0x20000000
#define GELIC_RX_TCPUDPCSUM 0x10000000
/* Interrupt options */
#define GELIC_INT_RXDONE 0x0000000000004000UL
#define GELIC_INT_RXFRAME 0x1000000000000000UL
#define GELIC_INT_TXDONE 0x0080000000000000UL
#define GELIC_INT_TX_CHAIN_END 0x0100000000000000UL
#define GELIC_INT_PHY 0x0000000020000000UL
/* Hardware DMA descriptor. Must be 32-byte aligned */
struct glc_dmadesc {
uint32_t paddr; /* Must be 128 byte aligned for receive */
uint32_t len;
uint32_t next;
uint32_t cmd_stat;
uint32_t result_size;
uint32_t valid_size;
uint32_t data_stat;
uint32_t rxerror;
};
#endif /* _POWERPC_PS3_IF_GLCREG_H */