d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
cb07d7668c
freebsd-dev/gnu/usr.bin/cc/cc_int/dbxout.c
Jordan K. Hubbard 526195ad0d General -Wall warning cleanup, part I. 
Submitted-By: Kent Vander Velden <graphix@iastate.edu>
1996-07-12 19:08:36 +00:00

2595 lines
77 KiB
C
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/* Output dbx-format symbol table information from GNU compiler.
Copyright (C) 1987, 1988, 1992, 1993, 1994 Free Software Foundation, Inc.
This file is part of GNU CC.
GNU CC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2, or (at your option)
any later version.
GNU CC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with GNU CC; see the file COPYING. If not, write to
the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA. */
/* Output dbx-format symbol table data.
This consists of many symbol table entries, each of them
a .stabs assembler pseudo-op with four operands:
a "name" which is really a description of one symbol and its type,
a "code", which is a symbol defined in stab.h whose name starts with N_,
an unused operand always 0,
and a "value" which is an address or an offset.
The name is enclosed in doublequote characters.
Each function, variable, typedef, and structure tag
has a symbol table entry to define it.
The beginning and end of each level of name scoping within
a function are also marked by special symbol table entries.
The "name" consists of the symbol name, a colon, a kind-of-symbol letter,
and a data type number. The data type number may be followed by
"=" and a type definition; normally this will happen the first time
the type number is mentioned. The type definition may refer to
other types by number, and those type numbers may be followed
by "=" and nested definitions.
This can make the "name" quite long.
When a name is more than 80 characters, we split the .stabs pseudo-op
into two .stabs pseudo-ops, both sharing the same "code" and "value".
The first one is marked as continued with a double-backslash at the
end of its "name".
The kind-of-symbol letter distinguished function names from global
variables from file-scope variables from parameters from auto
variables in memory from typedef names from register variables.
See `dbxout_symbol'.
The "code" is mostly redundant with the kind-of-symbol letter
that goes in the "name", but not entirely: for symbols located
in static storage, the "code" says which segment the address is in,
which controls how it is relocated.
The "value" for a symbol in static storage
is the core address of the symbol (actually, the assembler
label for the symbol). For a symbol located in a stack slot
it is the stack offset; for one in a register, the register number.
For a typedef symbol, it is zero.
If DEBUG_SYMS_TEXT is defined, all debugging symbols must be
output while in the text section.
For more on data type definitions, see `dbxout_type'. */
/* Include these first, because they may define MIN and MAX. */
#include <stdio.h>
#include <string.h>
#include <errno.h>
#include "config.h"
#include "tree.h"
#include "rtl.h"
#include "flags.h"
#include "regs.h"
#include "insn-config.h"
#include "reload.h"
#include "defaults.h"
#include "output.h" /* ASM_OUTPUT_SOURCE_LINE may refer to sdb functions. */
#ifndef errno
extern int errno;
#endif
#ifdef XCOFF_DEBUGGING_INFO
#include "xcoffout.h"
#endif
#ifndef ASM_STABS_OP
#define ASM_STABS_OP ".stabs"
#endif
#ifndef ASM_STABN_OP
#define ASM_STABN_OP ".stabn"
#endif
#ifndef DBX_TYPE_DECL_STABS_CODE
#define DBX_TYPE_DECL_STABS_CODE N_LSYM
#endif
#ifndef DBX_STATIC_CONST_VAR_CODE
#define DBX_STATIC_CONST_VAR_CODE N_FUN
#endif
#ifndef DBX_REGPARM_STABS_CODE
#define DBX_REGPARM_STABS_CODE N_RSYM
#endif
#ifndef DBX_REGPARM_STABS_LETTER
#define DBX_REGPARM_STABS_LETTER 'P'
#endif
#ifndef DBX_MEMPARM_STABS_LETTER
#define DBX_MEMPARM_STABS_LETTER 'p'
#endif
#ifndef FILE_NAME_JOINER
#define FILE_NAME_JOINER "/"
#endif
/* Nonzero means if the type has methods, only output debugging
information if methods are actually written to the asm file. */
static int flag_minimal_debug = 1;
/* Nonzero if we have actually used any of the GDB extensions
to the debugging format. The idea is that we use them for the
first time only if there's a strong reason, but once we have done that,
we use them whenever convenient. */
static int have_used_extensions = 0;
/* Number for the next N_SOL filename stabs label. The number 0 is reserved
for the N_SO filename stabs label. */
static int source_label_number = 1;
char *getpwd ();
/* Typical USG systems don't have stab.h, and they also have
no use for DBX-format debugging info. */
#if defined (DBX_DEBUGGING_INFO) || defined (XCOFF_DEBUGGING_INFO)
#ifdef DEBUG_SYMS_TEXT
#define FORCE_TEXT text_section ();
#else
#define FORCE_TEXT
#endif
#if defined (USG) || defined (NO_STAB_H)
#include "gstab.h" /* If doing DBX on sysV, use our own stab.h. */
#else
#include <stab.h> /* On BSD, use the system's stab.h. */
/* This is a GNU extension we need to reference in this file. */
#ifndef N_CATCH
#define N_CATCH 0x54
#endif
#endif /* not USG */
#ifdef __GNU_STAB__
#define STAB_CODE_TYPE enum __stab_debug_code
#else
#define STAB_CODE_TYPE int
#endif
/* 1 if PARM is passed to this function in memory. */
#define PARM_PASSED_IN_MEMORY(PARM) \
(GET_CODE (DECL_INCOMING_RTL (PARM)) == MEM)
/* A C expression for the integer offset value of an automatic variable
(N_LSYM) having address X (an RTX). */
#ifndef DEBUGGER_AUTO_OFFSET
#define DEBUGGER_AUTO_OFFSET(X) \
(GET_CODE (X) == PLUS ? INTVAL (XEXP (X, 1)) : 0)
#endif
/* A C expression for the integer offset value of an argument (N_PSYM)
having address X (an RTX). The nominal offset is OFFSET. */
#ifndef DEBUGGER_ARG_OFFSET
#define DEBUGGER_ARG_OFFSET(OFFSET, X) (OFFSET)
#endif
/* Stream for writing to assembler file. */
static FILE *asmfile;
/* Last source file name mentioned in a NOTE insn. */
static char *lastfile;
/* Current working directory. */
static char *cwd;
enum typestatus {TYPE_UNSEEN, TYPE_XREF, TYPE_DEFINED};
/* Vector recording the status of describing C data types.
When we first notice a data type (a tree node),
we assign it a number using next_type_number.
That is its index in this vector.
The vector element says whether we have yet output
the definition of the type. TYPE_XREF says we have
output it as a cross-reference only. */
enum typestatus *typevec;
/* Number of elements of space allocated in `typevec'. */
static int typevec_len;
/* In dbx output, each type gets a unique number.
This is the number for the next type output.
The number, once assigned, is in the TYPE_SYMTAB_ADDRESS field. */
static int next_type_number;
/* In dbx output, we must assign symbol-blocks id numbers
in the order in which their beginnings are encountered.
We output debugging info that refers to the beginning and
end of the ranges of code in each block
with assembler labels LBBn and LBEn, where n is the block number.
The labels are generated in final, which assigns numbers to the
blocks in the same way. */
static int next_block_number;
/* These variables are for dbxout_symbol to communicate to
dbxout_finish_symbol.
current_sym_code is the symbol-type-code, a symbol N_... define in stab.h.
current_sym_value and current_sym_addr are two ways to address the
value to store in the symtab entry.
current_sym_addr if nonzero represents the value as an rtx.
If that is zero, current_sym_value is used. This is used
when the value is an offset (such as for auto variables,
register variables and parms). */
static STAB_CODE_TYPE current_sym_code;
static int current_sym_value;
static rtx current_sym_addr;
/* Number of chars of symbol-description generated so far for the
current symbol. Used by CHARS and CONTIN. */
static int current_sym_nchars;
/* Report having output N chars of the current symbol-description. */
#define CHARS(N) (current_sym_nchars += (N))
/* Break the current symbol-description, generating a continuation,
if it has become long. */
#ifndef DBX_CONTIN_LENGTH
#define DBX_CONTIN_LENGTH 80
#endif
#if DBX_CONTIN_LENGTH > 0
#define CONTIN \
do {if (current_sym_nchars > DBX_CONTIN_LENGTH) dbxout_continue ();} while (0)
#else
#define CONTIN
#endif
void dbxout_types ();
void dbxout_args ();
void dbxout_symbol ();
static void dbxout_type_name ();
static void dbxout_type ();
static void dbxout_typedefs ();
static void dbxout_symbol_name ();
static void dbxout_symbol_location ();
static void dbxout_prepare_symbol ();
static void dbxout_finish_symbol ();
static void dbxout_continue ();
static void print_int_cst_octal ();
static void print_octal ();
#if 0 /* Not clear we will actually need this. */
/* Return the absolutized filename for the given relative
filename. Note that if that filename is already absolute, it may
still be returned in a modified form because this routine also
eliminates redundant slashes and single dots and eliminates double
dots to get a shortest possible filename from the given input
filename. The absolutization of relative filenames is made by
assuming that the given filename is to be taken as relative to
the first argument (cwd) or to the current directory if cwd is
NULL. */
static char *
abspath (rel_filename)
char *rel_filename;
{
/* Setup the current working directory as needed. */
char *abs_buffer
= (char *) alloca (strlen (cwd) + strlen (rel_filename) + 1);
char *endp = abs_buffer;
char *outp, *inp;
char *value;
/* Copy the filename (possibly preceded by the current working
directory name) into the absolutization buffer. */
{
char *src_p;
if (rel_filename[0] != '/')
{
src_p = cwd;
while (*endp++ = *src_p++)
continue;
*(endp-1) = '/'; /* overwrite null */
}
src_p = rel_filename;
while (*endp++ = *src_p++)
continue;
if (endp[-1] == '/')
*endp = '\0';
/* Now make a copy of abs_buffer into abs_buffer, shortening the
filename (by taking out slashes and dots) as we go. */
outp = inp = abs_buffer;
*outp++ = *inp++; /* copy first slash */
for (;;)
{
if (!inp[0])
break;
else if (inp[0] == '/' && outp[-1] == '/')
{
inp++;
continue;
}
else if (inp[0] == '.' && outp[-1] == '/')
{
if (!inp[1])
break;
else if (inp[1] == '/')
{
inp += 2;
continue;
}
else if ((inp[1] == '.') && (inp[2] == 0 || inp[2] == '/'))
{
inp += (inp[2] == '/') ? 3 : 2;
outp -= 2;
while (outp >= abs_buffer && *outp != '/')
outp--;
if (outp < abs_buffer)
{
/* Catch cases like /.. where we try to backup to a
point above the absolute root of the logical file
system. */
fprintf (stderr, "%s: invalid file name: %s\n",
pname, rel_filename);
exit (1);
}
*++outp = '\0';
continue;
}
}
*outp++ = *inp++;
}
/* On exit, make sure that there is a trailing null, and make sure that
the last character of the returned string is *not* a slash. */
*outp = '\0';
if (outp[-1] == '/')
*--outp = '\0';
/* Make a copy (in the heap) of the stuff left in the absolutization
buffer and return a pointer to the copy. */
value = (char *) oballoc (strlen (abs_buffer) + 1);
strcpy (value, abs_buffer);
return value;
}
#endif /* 0 */
/* At the beginning of compilation, start writing the symbol table.
Initialize `typevec' and output the standard data types of C. */
void
dbxout_init (asm_file, input_file_name, syms)
FILE *asm_file;
char *input_file_name;
tree syms;
{
char ltext_label_name[100];
asmfile = asm_file;
typevec_len = 100;
typevec = (enum typestatus *) xmalloc (typevec_len * sizeof typevec[0]);
bzero ((char *) typevec, typevec_len * sizeof typevec[0]);
/* Convert Ltext into the appropriate format for local labels in case
the system doesn't insert underscores in front of user generated
labels. */
ASM_GENERATE_INTERNAL_LABEL (ltext_label_name, "Ltext", 0);
/* Put the current working directory in an N_SO symbol. */
#ifndef DBX_WORKING_DIRECTORY /* Only some versions of DBX want this,
but GDB always does. */
if (use_gnu_debug_info_extensions)
#endif
{
if (!cwd && (cwd = getpwd ()) && (!*cwd || cwd[strlen (cwd) - 1] != '/'))
{
char *wdslash = xmalloc (strlen (cwd) + sizeof (FILE_NAME_JOINER));
sprintf (wdslash, "%s%s", cwd, FILE_NAME_JOINER);
cwd = wdslash;
}
if (cwd)
{
#ifdef DBX_OUTPUT_MAIN_SOURCE_DIRECTORY
DBX_OUTPUT_MAIN_SOURCE_DIRECTORY (asmfile, cwd);
#else /* no DBX_OUTPUT_MAIN_SOURCE_DIRECTORY */
fprintf (asmfile, "%s ", ASM_STABS_OP);
output_quoted_string (asmfile, cwd);
fprintf (asmfile, ",%d,0,0,%s\n", N_SO, &ltext_label_name[1]);
#endif /* no DBX_OUTPUT_MAIN_SOURCE_DIRECTORY */
}
}
#ifdef DBX_OUTPUT_MAIN_SOURCE_FILENAME
/* This should NOT be DBX_OUTPUT_SOURCE_FILENAME. That
would give us an N_SOL, and we want an N_SO. */
DBX_OUTPUT_MAIN_SOURCE_FILENAME (asmfile, input_file_name);
#else /* no DBX_OUTPUT_MAIN_SOURCE_FILENAME */
/* We include outputting `Ltext:' here,
because that gives you a way to override it. */
/* Used to put `Ltext:' before the reference, but that loses on sun 4. */
fprintf (asmfile, "%s ", ASM_STABS_OP);
output_quoted_string (asmfile, input_file_name);
fprintf (asmfile, ",%d,0,0,%s\n",
N_SO, &ltext_label_name[1]);
text_section ();
ASM_OUTPUT_INTERNAL_LABEL (asmfile, "Ltext", 0);
#endif /* no DBX_OUTPUT_MAIN_SOURCE_FILENAME */
/* Possibly output something to inform GDB that this compilation was by
GCC. It's easier for GDB to parse it when after the N_SO's. This
is used in Solaris 2. */
#ifdef ASM_IDENTIFY_GCC_AFTER_SOURCE
ASM_IDENTIFY_GCC_AFTER_SOURCE (asmfile);
#endif
lastfile = input_file_name;
next_type_number = 1;
next_block_number = 2;
/* Make sure that types `int' and `char' have numbers 1 and 2.
Definitions of other integer types will refer to those numbers.
(Actually it should no longer matter what their numbers are.
Also, if any types with tags have been defined, dbxout_symbol
will output them first, so the numbers won't be 1 and 2. That
happens in C++. So it's a good thing it should no longer matter). */
#ifdef DBX_OUTPUT_STANDARD_TYPES
DBX_OUTPUT_STANDARD_TYPES (syms);
#else
dbxout_symbol (TYPE_NAME (integer_type_node), 0);
dbxout_symbol (TYPE_NAME (char_type_node), 0);
#endif
/* Get all permanent types that have typedef names,
and output them all, except for those already output. */
dbxout_typedefs (syms);
}
/* Output any typedef names for types described by TYPE_DECLs in SYMS,
in the reverse order from that which is found in SYMS. */
static void
dbxout_typedefs (syms)
tree syms;
{
if (syms)
{
dbxout_typedefs (TREE_CHAIN (syms));
if (TREE_CODE (syms) == TYPE_DECL)
{
tree type = TREE_TYPE (syms);
if (TYPE_NAME (type)
&& TREE_CODE (TYPE_NAME (type)) == TYPE_DECL
&& ! TREE_ASM_WRITTEN (TYPE_NAME (type)))
dbxout_symbol (TYPE_NAME (type), 0);
}
}
}
/* Output debugging info to FILE to switch to sourcefile FILENAME. */
void
dbxout_source_file (file, filename)
FILE *file;
char *filename;
{
char ltext_label_name[100];
if (filename && (lastfile == 0 || strcmp (filename, lastfile)))
{
#ifdef DBX_OUTPUT_SOURCE_FILENAME
DBX_OUTPUT_SOURCE_FILENAME (file, filename);
#else
ASM_GENERATE_INTERNAL_LABEL (ltext_label_name, "Ltext",
source_label_number);
fprintf (file, "%s ", ASM_STABS_OP);
output_quoted_string (file, filename);
fprintf (file, ",%d,0,0,%s\n", N_SOL, &ltext_label_name[1]);
text_section ();
ASM_OUTPUT_INTERNAL_LABEL (asmfile, "Ltext", source_label_number);
source_label_number++;
#endif
lastfile = filename;
}
}
/* Output a line number symbol entry into output stream FILE,
for source file FILENAME and line number LINENO. */
void
dbxout_source_line (file, filename, lineno)
FILE *file;
char *filename;
int lineno;
{
dbxout_source_file (file, filename);
#ifdef ASM_OUTPUT_SOURCE_LINE
ASM_OUTPUT_SOURCE_LINE (file, lineno);
#else
fprintf (file, "\t%s %d,0,%d\n", ASM_STABD_OP, N_SLINE, lineno);
#endif
}
/* At the end of compilation, finish writing the symbol table.
Unless you define DBX_OUTPUT_MAIN_SOURCE_FILE_END, the default is
to do nothing. */
void
dbxout_finish (file, filename)
FILE *file;
char *filename;
{
#ifdef DBX_OUTPUT_MAIN_SOURCE_FILE_END
DBX_OUTPUT_MAIN_SOURCE_FILE_END (file, filename);
#endif /* DBX_OUTPUT_MAIN_SOURCE_FILE_END */
}
/* Continue a symbol-description that gets too big.
End one symbol table entry with a double-backslash
and start a new one, eventually producing something like
.stabs "start......\\",code,0,value
.stabs "...rest",code,0,value */
static void
dbxout_continue ()
{
#ifdef DBX_CONTIN_CHAR
fprintf (asmfile, "%c", DBX_CONTIN_CHAR);
#else
fprintf (asmfile, "\\\\");
#endif
dbxout_finish_symbol (NULL_TREE);
fprintf (asmfile, "%s \"", ASM_STABS_OP);
current_sym_nchars = 0;
}
/* Subroutine of `dbxout_type'. Output the type fields of TYPE.
This must be a separate function because anonymous unions require
recursive calls. */
static void
dbxout_type_fields (type)
tree type;
{
tree tem;
/* Output the name, type, position (in bits), size (in bits) of each
field. */
for (tem = TYPE_FIELDS (type); tem; tem = TREE_CHAIN (tem))
{
/* Omit here local type decls until we know how to support them. */
if (TREE_CODE (tem) == TYPE_DECL)
continue;
/* Omit fields whose position or size are variable. */
else if (TREE_CODE (tem) == FIELD_DECL
&& (TREE_CODE (DECL_FIELD_BITPOS (tem)) != INTEGER_CST
|| TREE_CODE (DECL_SIZE (tem)) != INTEGER_CST))
continue;
/* Omit here the nameless fields that are used to skip bits. */
else if (TREE_CODE (tem) != CONST_DECL)
{
/* Continue the line if necessary,
but not before the first field. */
if (tem != TYPE_FIELDS (type))
CONTIN;
if (use_gnu_debug_info_extensions
&& flag_minimal_debug
&& TREE_CODE (tem) == FIELD_DECL
&& DECL_VIRTUAL_P (tem)
&& DECL_ASSEMBLER_NAME (tem))
{
have_used_extensions = 1;
CHARS (3 + IDENTIFIER_LENGTH (DECL_NAME (TYPE_NAME (DECL_FCONTEXT (tem)))));
fputs (IDENTIFIER_POINTER (DECL_ASSEMBLER_NAME (tem)), asmfile);
dbxout_type (DECL_FCONTEXT (tem), 0, 0);
fprintf (asmfile, ":");
dbxout_type (TREE_TYPE (tem), 0, 0);
fprintf (asmfile, ",%d;",
TREE_INT_CST_LOW (DECL_FIELD_BITPOS (tem)));
continue;
}
if (DECL_NAME (tem))
{
fprintf (asmfile, "%s:", IDENTIFIER_POINTER (DECL_NAME (tem)));
CHARS (2 + IDENTIFIER_LENGTH (DECL_NAME (tem)));
}
else
{
fprintf (asmfile, ":");
CHARS (2);
}
if (use_gnu_debug_info_extensions
&& (TREE_PRIVATE (tem) || TREE_PROTECTED (tem)
|| TREE_CODE (tem) != FIELD_DECL))
{
have_used_extensions = 1;
putc ('/', asmfile);
putc ((TREE_PRIVATE (tem) ? '0'
: TREE_PROTECTED (tem) ? '1' : '2'),
asmfile);
CHARS (2);
}
dbxout_type ((TREE_CODE (tem) == FIELD_DECL
&& DECL_BIT_FIELD_TYPE (tem))
? DECL_BIT_FIELD_TYPE (tem)
: TREE_TYPE (tem), 0, 0);
if (TREE_CODE (tem) == VAR_DECL)
{
if (TREE_STATIC (tem) && use_gnu_debug_info_extensions)
{
char *name = IDENTIFIER_POINTER (DECL_ASSEMBLER_NAME (tem));
have_used_extensions = 1;
fprintf (asmfile, ":%s;", name);
CHARS (strlen (name));
}
else
{
/* If TEM is non-static, GDB won't understand it. */
fprintf (asmfile, ",0,0;");
}
}
else if (TREE_CODE (DECL_FIELD_BITPOS (tem)) == INTEGER_CST)
{
fprintf (asmfile, ",%d,%d;",
TREE_INT_CST_LOW (DECL_FIELD_BITPOS (tem)),
TREE_INT_CST_LOW (DECL_SIZE (tem)));
}
CHARS (23);
}
}
}
/* Subroutine of `dbxout_type_methods'. Output debug info about the
method described DECL. DEBUG_NAME is an encoding of the method's
type signature. ??? We may be able to do without DEBUG_NAME altogether
now. */
static void
dbxout_type_method_1 (decl, debug_name)
tree decl;
char *debug_name;
{
tree firstarg = TREE_VALUE (TYPE_ARG_TYPES (TREE_TYPE (decl)));
char c1 = 'A', c2;
if (TREE_CODE (TREE_TYPE (decl)) == FUNCTION_TYPE)
c2 = '?';
else /* it's a METHOD_TYPE. */
{
/* A for normal functions.
B for `const' member functions.
C for `volatile' member functions.
D for `const volatile' member functions. */
if (TYPE_READONLY (TREE_TYPE (firstarg)))
c1 += 1;
if (TYPE_VOLATILE (TREE_TYPE (firstarg)))
c1 += 2;
if (DECL_VINDEX (decl))
c2 = '*';
else
c2 = '.';
}
fprintf (asmfile, ":%s;%c%c%c", debug_name,
TREE_PRIVATE (decl) ? '0' : TREE_PROTECTED (decl) ? '1' : '2', c1, c2);
CHARS (IDENTIFIER_LENGTH (DECL_ASSEMBLER_NAME (decl)) + 6
- (debug_name - IDENTIFIER_POINTER (DECL_ASSEMBLER_NAME (decl))));
if (DECL_VINDEX (decl))
{
fprintf (asmfile, "%d;",
TREE_INT_CST_LOW (DECL_VINDEX (decl)));
dbxout_type (DECL_CONTEXT (decl), 0, 0);
fprintf (asmfile, ";");
CHARS (8);
}
}
/* Subroutine of `dbxout_type'. Output debug info about the methods defined
in TYPE. */
static void
dbxout_type_methods (type)
register tree type;
{
/* C++: put out the method names and their parameter lists */
tree methods = TYPE_METHODS (type);
tree type_encoding;
register tree fndecl;
register tree last;
char formatted_type_identifier_length[16];
register int type_identifier_length;
if (methods == NULL_TREE)
return;
type_encoding = DECL_NAME (TYPE_NAME (type));
#if 0
/* C++: Template classes break some assumptions made by this code about
the class names, constructor names, and encodings for assembler
label names. For now, disable output of dbx info for them. */
{
char *ptr = IDENTIFIER_POINTER (type_encoding);
/* This should use index. (mrs) */
while (*ptr && *ptr != '<') ptr++;
if (*ptr != 0)
{
static int warned;
if (!warned)
{
warned = 1;
#ifdef HAVE_TEMPLATES
if (warn_template_debugging)
warning ("dbx info for template class methods not yet supported");
#endif
}
return;
}
}
#endif
type_identifier_length = IDENTIFIER_LENGTH (type_encoding);
sprintf(formatted_type_identifier_length, "%d", type_identifier_length);
if (TREE_CODE (methods) == FUNCTION_DECL)
fndecl = methods;
else if (TREE_VEC_ELT (methods, 0) != NULL_TREE)
fndecl = TREE_VEC_ELT (methods, 0);
else
fndecl = TREE_VEC_ELT (methods, 1);
while (fndecl)
{
tree name = DECL_NAME (fndecl);
int need_prefix = 1;
/* Group together all the methods for the same operation.
These differ in the types of the arguments. */
for (last = NULL_TREE;
fndecl && (last == NULL_TREE || DECL_NAME (fndecl) == DECL_NAME (last));
fndecl = TREE_CHAIN (fndecl))
/* Output the name of the field (after overloading), as
well as the name of the field before overloading, along
with its parameter list */
{
/* This is the "mangled" name of the method.
It encodes the argument types. */
char *debug_name = IDENTIFIER_POINTER (DECL_ASSEMBLER_NAME (fndecl));
int destructor = 0;
CONTIN;
last = fndecl;
if (DECL_IGNORED_P (fndecl))
continue;
if (flag_minimal_debug)
{
/* Detect ordinary methods because their mangled names
start with the operation name. */
if (!strncmp (IDENTIFIER_POINTER (name), debug_name,
IDENTIFIER_LENGTH (name)))
{
debug_name += IDENTIFIER_LENGTH (name);
if (debug_name[0] == '_' && debug_name[1] == '_')
{
char *method_name = debug_name + 2;
char *length_ptr = formatted_type_identifier_length;
/* Get past const and volatile qualifiers. */
while (*method_name == 'C' || *method_name == 'V')
method_name++;
/* Skip digits for length of type_encoding. */
while (*method_name == *length_ptr && *length_ptr)
length_ptr++, method_name++;
if (! strncmp (method_name,
IDENTIFIER_POINTER (type_encoding),
type_identifier_length))
method_name += type_identifier_length;
debug_name = method_name;
}
}
/* Detect constructors by their style of name mangling. */
else if (debug_name[0] == '_' && debug_name[1] == '_')
{
char *ctor_name = debug_name + 2;
char *length_ptr = formatted_type_identifier_length;
while (*ctor_name == 'C' || *ctor_name == 'V')
ctor_name++;
/* Skip digits for length of type_encoding. */
while (*ctor_name == *length_ptr && *length_ptr)
length_ptr++, ctor_name++;
if (!strncmp (IDENTIFIER_POINTER (type_encoding), ctor_name,
type_identifier_length))
debug_name = ctor_name + type_identifier_length;
}
/* The other alternative is a destructor. */
else
destructor = 1;
/* Output the operation name just once, for the first method
that we output. */
if (need_prefix)
{
fprintf (asmfile, "%s::", IDENTIFIER_POINTER (name));
CHARS (IDENTIFIER_LENGTH (name) + 2);
need_prefix = 0;
}
}
dbxout_type (TREE_TYPE (fndecl), 0, destructor);
dbxout_type_method_1 (fndecl, debug_name);
}
if (!need_prefix)
{
putc (';', asmfile);
CHARS (1);
}
}
}
/* Emit a "range" type specification, which has the form:
"r<index type>;<lower bound>;<upper bound>;".
TYPE is an INTEGER_TYPE. */
static void
dbxout_range_type (type)
tree type;
{
fprintf (asmfile, "r");
if (TREE_TYPE (type))
dbxout_type (TREE_TYPE (type), 0, 0);
else if (TREE_CODE (type) != INTEGER_TYPE)
dbxout_type (type, 0, 0); /* E.g. Pascal's ARRAY [BOOLEAN] of INTEGER */
else
{
/* This used to say `r1' and we used to take care
to make sure that `int' was type number 1. */
fprintf (asmfile, "%d", TYPE_SYMTAB_ADDRESS (integer_type_node));
}
if (TREE_CODE (TYPE_MIN_VALUE (type)) == INTEGER_CST)
fprintf (asmfile, ";%d",
TREE_INT_CST_LOW (TYPE_MIN_VALUE (type)));
else
fprintf (asmfile, ";0");
if (TREE_CODE (TYPE_MAX_VALUE (type)) == INTEGER_CST)
fprintf (asmfile, ";%d;",
TREE_INT_CST_LOW (TYPE_MAX_VALUE (type)));
else
fprintf (asmfile, ";-1;");
}
/* Output a reference to a type. If the type has not yet been
described in the dbx output, output its definition now.
For a type already defined, just refer to its definition
using the type number.
If FULL is nonzero, and the type has been described only with
a forward-reference, output the definition now.
If FULL is zero in this case, just refer to the forward-reference
using the number previously allocated.
If SHOW_ARG_TYPES is nonzero, we output a description of the argument
types for a METHOD_TYPE. */
static void
dbxout_type (type, full, show_arg_types)
tree type;
int full;
int show_arg_types;
{
register tree tem;
static int anonymous_type_number = 0;
/* If there was an input error and we don't really have a type,
avoid crashing and write something that is at least valid
by assuming `int'. */
if (type == error_mark_node)
type = integer_type_node;
else
{
type = TYPE_MAIN_VARIANT (type);
if (TYPE_NAME (type)
&& TREE_CODE (TYPE_NAME (type)) == TYPE_DECL
&& TYPE_DECL_SUPPRESS_DEBUG (TYPE_NAME (type)))
full = 0;
}
if (TYPE_SYMTAB_ADDRESS (type) == 0)
{
/* Type has no dbx number assigned. Assign next available number. */
TYPE_SYMTAB_ADDRESS (type) = next_type_number++;
/* Make sure type vector is long enough to record about this type. */
if (next_type_number == typevec_len)
{
typevec =
(enum typestatus *) xrealloc (typevec,
typevec_len * 2 * sizeof typevec[0]);
bzero ((char *) (typevec + typevec_len),
typevec_len * sizeof typevec[0]);
typevec_len *= 2;
}
}
/* Output the number of this type, to refer to it. */
fprintf (asmfile, "%d", TYPE_SYMTAB_ADDRESS (type));
CHARS (3);
#ifdef DBX_TYPE_DEFINED
if (DBX_TYPE_DEFINED (type))
return;
#endif
/* If this type's definition has been output or is now being output,
that is all. */
switch (typevec[TYPE_SYMTAB_ADDRESS (type)])
{
case TYPE_UNSEEN:
break;
case TYPE_XREF:
/* If we have already had a cross reference,
and either that's all we want or that's the best we could do,
don't repeat the cross reference.
Sun dbx crashes if we do. */
if (! full || TYPE_SIZE (type) == 0
/* No way in DBX fmt to describe a variable size. */
|| TREE_CODE (TYPE_SIZE (type)) != INTEGER_CST)
return;
break;
case TYPE_DEFINED:
return;
}
#ifdef DBX_NO_XREFS
/* For systems where dbx output does not allow the `=xsNAME:' syntax,
leave the type-number completely undefined rather than output
a cross-reference. If we have already used GNU debug info extensions,
then it is OK to output a cross reference. This is necessary to get
proper C++ debug output. */
if ((TREE_CODE (type) == RECORD_TYPE || TREE_CODE (type) == UNION_TYPE
|| TREE_CODE (type) == QUAL_UNION_TYPE
|| TREE_CODE (type) == ENUMERAL_TYPE)
&& ! use_gnu_debug_info_extensions)
/* We must use the same test here as we use twice below when deciding
whether to emit a cross-reference. */
if ((TYPE_NAME (type) != 0
&& ! (TREE_CODE (TYPE_NAME (type)) == TYPE_DECL
&& DECL_IGNORED_P (TYPE_NAME (type)))
&& !full)
|| TYPE_SIZE (type) == 0
/* No way in DBX fmt to describe a variable size. */
|| TREE_CODE (TYPE_SIZE (type)) != INTEGER_CST)
{
typevec[TYPE_SYMTAB_ADDRESS (type)] = TYPE_XREF;
return;
}
#endif
/* Output a definition now. */
fprintf (asmfile, "=");
CHARS (1);
/* Mark it as defined, so that if it is self-referent
we will not get into an infinite recursion of definitions. */
typevec[TYPE_SYMTAB_ADDRESS (type)] = TYPE_DEFINED;
switch (TREE_CODE (type))
{
case VOID_TYPE:
case LANG_TYPE:
/* For a void type, just define it as itself; ie, "5=5".
This makes us consider it defined
without saying what it is. The debugger will make it
a void type when the reference is seen, and nothing will
ever override that default. */
fprintf (asmfile, "%d", TYPE_SYMTAB_ADDRESS (type));
CHARS (3);
break;
case INTEGER_TYPE:
if (type == char_type_node && ! TREE_UNSIGNED (type))
/* Output the type `char' as a subrange of itself!
I don't understand this definition, just copied it
from the output of pcc.
This used to use `r2' explicitly and we used to
take care to make sure that `char' was type number 2. */
fprintf (asmfile, "r%d;0;127;", TYPE_SYMTAB_ADDRESS (type));
else if (use_gnu_debug_info_extensions
&& (TYPE_PRECISION (type) > TYPE_PRECISION (integer_type_node)
|| TYPE_PRECISION (type) > HOST_BITS_PER_WIDE_INT))
{
/* This used to say `r1' and we used to take care
to make sure that `int' was type number 1. */
fprintf (asmfile, "r%d;", TYPE_SYMTAB_ADDRESS (integer_type_node));
print_int_cst_octal (TYPE_MIN_VALUE (type));
fprintf (asmfile, ";");
print_int_cst_octal (TYPE_MAX_VALUE (type));
fprintf (asmfile, ";");
}
else /* Output other integer types as subranges of `int'. */
dbxout_range_type (type);
CHARS (25);
break;
case REAL_TYPE:
/* This used to say `r1' and we used to take care
to make sure that `int' was type number 1. */
fprintf (asmfile, "r%d;%d;0;", TYPE_SYMTAB_ADDRESS (integer_type_node),
int_size_in_bytes (type));
CHARS (16);
break;
case CHAR_TYPE:
if (use_gnu_debug_info_extensions)
fprintf (asmfile, "@s%d;-20;",
BITS_PER_UNIT * int_size_in_bytes (type));
else
/* Output the type `char' as a subrange of itself.
That is what pcc seems to do. */
fprintf (asmfile, "r%d;0;%d;", TYPE_SYMTAB_ADDRESS (char_type_node),
TREE_UNSIGNED (type) ? 255 : 127);
CHARS (9);
break;
case BOOLEAN_TYPE:
if (use_gnu_debug_info_extensions)
fprintf (asmfile, "@s%d;-16;",
BITS_PER_UNIT * int_size_in_bytes (type));
else /* Define as enumeral type (False, True) */
fprintf (asmfile, "eFalse:0,True:1,;");
CHARS (17);
break;
case FILE_TYPE:
putc ('d', asmfile);
CHARS (1);
dbxout_type (TREE_TYPE (type), 0, 0);
break;
case COMPLEX_TYPE:
/* Differs from the REAL_TYPE by its new data type number */
if (TREE_CODE (TREE_TYPE (type)) == REAL_TYPE)
{
fprintf (asmfile, "r%d;%d;0;",
TYPE_SYMTAB_ADDRESS (type),
int_size_in_bytes (TREE_TYPE (type)));
CHARS (15); /* The number is probably incorrect here. */
}
else
{
/* Output a complex integer type as a structure,
pending some other way to do it. */
fprintf (asmfile, "s%d", int_size_in_bytes (type));
fprintf (asmfile, "real:");
CHARS (10);
dbxout_type (TREE_TYPE (type), 0, 0);
fprintf (asmfile, ",%d,%d;",
0, TYPE_PRECISION (TREE_TYPE (type)));
CHARS (8);
fprintf (asmfile, "imag:");
CHARS (5);
dbxout_type (TREE_TYPE (type), 0, 0);
fprintf (asmfile, ",%d,%d;;",
TYPE_PRECISION (TREE_TYPE (type)),
TYPE_PRECISION (TREE_TYPE (type)));
CHARS (9);
}
break;
case SET_TYPE:
if (use_gnu_debug_info_extensions)
{
have_used_extensions = 1;
fprintf (asmfile, "@s%d;",
BITS_PER_UNIT * int_size_in_bytes (type));
/* Check if a bitstring type, which in Chill is
different from a [power]set. */
if (TYPE_STRING_FLAG (type))
fprintf (asmfile, "@S;");
}
putc ('S', asmfile);
CHARS (1);
dbxout_type (TYPE_DOMAIN (type), 0, 0);
break;
case ARRAY_TYPE:
/* Output "a" followed by a range type definition
for the index type of the array
followed by a reference to the target-type.
ar1;0;N;M for a C array of type M and size N+1. */
/* Check if a character string type, which in Chill is
different from an array of characters. */
if (TYPE_STRING_FLAG (type) && use_gnu_debug_info_extensions)
{
have_used_extensions = 1;
fprintf (asmfile, "@S;");
}
tem = TYPE_DOMAIN (type);
if (tem == NULL)
fprintf (asmfile, "ar%d;0;-1;",
TYPE_SYMTAB_ADDRESS (integer_type_node));
else
{
fprintf (asmfile, "a");
dbxout_range_type (tem);
}
CHARS (17);
dbxout_type (TREE_TYPE (type), 0, 0);
break;
case RECORD_TYPE:
case UNION_TYPE:
case QUAL_UNION_TYPE:
{
int i, n_baseclasses = 0;
if (TYPE_BINFO (type) != 0 && TYPE_BINFO_BASETYPES (type) != 0)
n_baseclasses = TREE_VEC_LENGTH (TYPE_BINFO_BASETYPES (type));
/* Output a structure type. We must use the same test here as we
use in the DBX_NO_XREFS case above. */
if ((TYPE_NAME (type) != 0
&& ! (TREE_CODE (TYPE_NAME (type)) == TYPE_DECL
&& DECL_IGNORED_P (TYPE_NAME (type)))
&& !full)
|| TYPE_SIZE (type) == 0
/* No way in DBX fmt to describe a variable size. */
|| TREE_CODE (TYPE_SIZE (type)) != INTEGER_CST)
{
/* If the type is just a cross reference, output one
and mark the type as partially described.
If it later becomes defined, we will output
its real definition.
If the type has a name, don't nest its definition within
another type's definition; instead, output an xref
and let the definition come when the name is defined. */
fprintf (asmfile, (TREE_CODE (type) == RECORD_TYPE) ? "xs" : "xu");
CHARS (3);
#if 0 /* This assertion is legitimately false in C++. */
/* We shouldn't be outputting a reference to a type before its
definition unless the type has a tag name.
A typedef name without a tag name should be impossible. */
if (TREE_CODE (TYPE_NAME (type)) != IDENTIFIER_NODE)
abort ();
#endif
if (TYPE_NAME (type) != 0)
dbxout_type_name (type);
else
fprintf (asmfile, "$$%d", anonymous_type_number++);
fprintf (asmfile, ":");
typevec[TYPE_SYMTAB_ADDRESS (type)] = TYPE_XREF;
break;
}
/* Identify record or union, and print its size. */
fprintf (asmfile, (TREE_CODE (type) == RECORD_TYPE) ? "s%d" : "u%d",
int_size_in_bytes (type));
if (use_gnu_debug_info_extensions)
{
if (n_baseclasses)
{
have_used_extensions = 1;
fprintf (asmfile, "!%d,", n_baseclasses);
CHARS (8);
}
}
for (i = 0; i < n_baseclasses; i++)
{
tree child = TREE_VEC_ELT (BINFO_BASETYPES (TYPE_BINFO (type)), i);
if (use_gnu_debug_info_extensions)
{
have_used_extensions = 1;
putc (TREE_VIA_VIRTUAL (child) ? '1'
: '0',
asmfile);
putc (TREE_VIA_PUBLIC (child) ? '2'
: '0',
asmfile);
fprintf (asmfile, "%d,",
TREE_INT_CST_LOW (BINFO_OFFSET (child)) * BITS_PER_UNIT);
CHARS (15);
dbxout_type (BINFO_TYPE (child), 0, 0);
putc (';', asmfile);
}
else
{
/* Print out the base class information with fields
which have the same names at the types they hold. */
dbxout_type_name (BINFO_TYPE (child));
putc (':', asmfile);
dbxout_type (BINFO_TYPE (child), full, 0);
fprintf (asmfile, ",%d,%d;",
TREE_INT_CST_LOW (BINFO_OFFSET (child)) * BITS_PER_UNIT,
TREE_INT_CST_LOW (DECL_SIZE (TYPE_NAME (BINFO_TYPE (child)))) * BITS_PER_UNIT);
CHARS (20);
}
}
}
CHARS (11);
/* Write out the field declarations. */
dbxout_type_fields (type);
if (use_gnu_debug_info_extensions && TYPE_METHODS (type) != NULL_TREE)
{
have_used_extensions = 1;
dbxout_type_methods (type);
}
putc (';', asmfile);
if (use_gnu_debug_info_extensions && TREE_CODE (type) == RECORD_TYPE
/* Avoid the ~ if we don't really need it--it confuses dbx. */
&& TYPE_VFIELD (type))
{
have_used_extensions = 1;
/* Tell GDB+ that it may keep reading. */
putc ('~', asmfile);
/* We need to write out info about what field this class
uses as its "main" vtable pointer field, because if this
field is inherited from a base class, GDB cannot necessarily
figure out which field it's using in time. */
if (TYPE_VFIELD (type))
{
putc ('%', asmfile);
dbxout_type (DECL_FCONTEXT (TYPE_VFIELD (type)), 0, 0);
}
putc (';', asmfile);
CHARS (3);
}
break;
case ENUMERAL_TYPE:
/* We must use the same test here as we use in the DBX_NO_XREFS case
above. We simplify it a bit since an enum will never have a variable
size. */
if ((TYPE_NAME (type) != 0
&& ! (TREE_CODE (TYPE_NAME (type)) == TYPE_DECL
&& DECL_IGNORED_P (TYPE_NAME (type)))
&& !full)
|| TYPE_SIZE (type) == 0)
{
fprintf (asmfile, "xe");
CHARS (3);
dbxout_type_name (type);
typevec[TYPE_SYMTAB_ADDRESS (type)] = TYPE_XREF;
fprintf (asmfile, ":");
return;
}
#ifdef DBX_OUTPUT_ENUM
DBX_OUTPUT_ENUM (asmfile, type);
#else
if (use_gnu_debug_info_extensions
&& TYPE_PRECISION (type) != TYPE_PRECISION (integer_type_node))
fprintf (asmfile, "@s%d;", TYPE_PRECISION (type));
putc ('e', asmfile);
CHARS (1);
for (tem = TYPE_VALUES (type); tem; tem = TREE_CHAIN (tem))
{
fprintf (asmfile, "%s:", IDENTIFIER_POINTER (TREE_PURPOSE (tem)));
if (TREE_INT_CST_HIGH (TREE_VALUE (tem)) == 0)
fprintf (asmfile, "%lu",
(unsigned long) TREE_INT_CST_LOW (TREE_VALUE (tem)));
else if (TREE_INT_CST_HIGH (TREE_VALUE (tem)) == -1
&& TREE_INT_CST_LOW (TREE_VALUE (tem)) < 0)
fprintf (asmfile, "%ld",
(long) TREE_INT_CST_LOW (TREE_VALUE (tem)));
else
print_int_cst_octal (TREE_VALUE (tem));
fprintf (asmfile, ",");
CHARS (20 + IDENTIFIER_LENGTH (TREE_PURPOSE (tem)));
if (TREE_CHAIN (tem) != 0)
CONTIN;
}
putc (';', asmfile);
CHARS (1);
#endif
break;
case POINTER_TYPE:
putc ('*', asmfile);
CHARS (1);
dbxout_type (TREE_TYPE (type), 0, 0);
break;
case METHOD_TYPE:
if (use_gnu_debug_info_extensions)
{
have_used_extensions = 1;
putc ('#', asmfile);
CHARS (1);
if (flag_minimal_debug && !show_arg_types)
{
/* Normally, just output the return type.
The argument types are encoded in the method name. */
putc ('#', asmfile);
dbxout_type (TREE_TYPE (type), 0, 0);
putc (';', asmfile);
CHARS (1);
}
else
{
/* When outputting destructors, we need to write
the argument types out longhand. */
dbxout_type (TYPE_METHOD_BASETYPE (type), 0, 0);
putc (',', asmfile);
CHARS (1);
dbxout_type (TREE_TYPE (type), 0, 0);
dbxout_args (TYPE_ARG_TYPES (type));
putc (';', asmfile);
CHARS (1);
}
}
else
{
/* Treat it as a function type. */
dbxout_type (TREE_TYPE (type), 0, 0);
}
break;
case OFFSET_TYPE:
if (use_gnu_debug_info_extensions)
{
have_used_extensions = 1;
putc ('@', asmfile);
CHARS (1);
dbxout_type (TYPE_OFFSET_BASETYPE (type), 0, 0);
putc (',', asmfile);
CHARS (1);
dbxout_type (TREE_TYPE (type), 0, 0);
}
else
{
/* Should print as an int, because it is really
just an offset. */
dbxout_type (integer_type_node, 0, 0);
}
break;
case REFERENCE_TYPE:
if (use_gnu_debug_info_extensions)
have_used_extensions = 1;
putc (use_gnu_debug_info_extensions ? '&' : '*', asmfile);
CHARS (1);
dbxout_type (TREE_TYPE (type), 0, 0);
break;
case FUNCTION_TYPE:
putc ('f', asmfile);
CHARS (1);
dbxout_type (TREE_TYPE (type), 0, 0);
break;
default:
abort ();
}
}
/* Print the value of integer constant C, in octal,
handling double precision. */
static void
print_int_cst_octal (c)
tree c;
{
unsigned HOST_WIDE_INT high = TREE_INT_CST_HIGH (c);
unsigned HOST_WIDE_INT low = TREE_INT_CST_LOW (c);
int excess = (3 - (HOST_BITS_PER_WIDE_INT % 3));
int width = TYPE_PRECISION (TREE_TYPE (c));
/* GDB wants constants with no extra leading "1" bits, so
we need to remove any sign-extension that might be
present. */
if (width == HOST_BITS_PER_WIDE_INT * 2)
;
else if (width > HOST_BITS_PER_WIDE_INT)
high &= (((HOST_WIDE_INT) 1 << (width - HOST_BITS_PER_WIDE_INT)) - 1);
else if (width == HOST_BITS_PER_WIDE_INT)
high = 0;
else
high = 0, low &= (((HOST_WIDE_INT) 1 << width) - 1);
fprintf (asmfile, "0");
if (excess == 3)
{
print_octal (high, HOST_BITS_PER_WIDE_INT / 3);
print_octal (low, HOST_BITS_PER_WIDE_INT / 3);
}
else
{
unsigned HOST_WIDE_INT beg = high >> excess;
unsigned HOST_WIDE_INT middle
= ((high & (((HOST_WIDE_INT) 1 << excess) - 1)) << (3 - excess)
| (low >> (HOST_BITS_PER_WIDE_INT / 3 * 3)));
unsigned HOST_WIDE_INT end
= low & (((unsigned HOST_WIDE_INT) 1
<< (HOST_BITS_PER_WIDE_INT / 3 * 3))
- 1);
fprintf (asmfile, "%o%01o", beg, middle);
print_octal (end, HOST_BITS_PER_WIDE_INT / 3);
}
}
static void
print_octal (value, digits)
unsigned HOST_WIDE_INT value;
int digits;
{
int i;
for (i = digits - 1; i >= 0; i--)
fprintf (asmfile, "%01o", ((value >> (3 * i)) & 7));
}
/* Output the name of type TYPE, with no punctuation.
Such names can be set up either by typedef declarations
or by struct, enum and union tags. */
static void
dbxout_type_name (type)
register tree type;
{
tree t;
if (TYPE_NAME (type) == 0)
abort ();
if (TREE_CODE (TYPE_NAME (type)) == IDENTIFIER_NODE)
{
t = TYPE_NAME (type);
}
else if (TREE_CODE (TYPE_NAME (type)) == TYPE_DECL)
{
t = DECL_NAME (TYPE_NAME (type));
}
else
abort ();
fprintf (asmfile, "%s", IDENTIFIER_POINTER (t));
CHARS (IDENTIFIER_LENGTH (t));
}
/* Output a .stabs for the symbol defined by DECL,
which must be a ..._DECL node in the normal namespace.
It may be a CONST_DECL, a FUNCTION_DECL, a PARM_DECL or a VAR_DECL.
LOCAL is nonzero if the scope is less than the entire file. */
void
dbxout_symbol (decl, local)
tree decl;
int local;
{
tree type = TREE_TYPE (decl);
tree context = NULL_TREE;
/* Cast avoids warning in old compilers. */
current_sym_code = (STAB_CODE_TYPE) 0;
current_sym_value = 0;
current_sym_addr = 0;
/* Ignore nameless syms, but don't ignore type tags. */
if ((DECL_NAME (decl) == 0 && TREE_CODE (decl) != TYPE_DECL)
|| DECL_IGNORED_P (decl))
return;
dbxout_prepare_symbol (decl);
/* The output will always start with the symbol name,
so always count that in the length-output-so-far. */
if (DECL_NAME (decl) != 0)
current_sym_nchars = 2 + IDENTIFIER_LENGTH (DECL_NAME (decl));
switch (TREE_CODE (decl))
{
case CONST_DECL:
/* Enum values are defined by defining the enum type. */
break;
case FUNCTION_DECL:
if (DECL_RTL (decl) == 0)
return;
if (DECL_EXTERNAL (decl))
break;
/* Don't mention a nested function under its parent. */
context = decl_function_context (decl);
if (context == current_function_decl)
break;
if (GET_CODE (DECL_RTL (decl)) != MEM
|| GET_CODE (XEXP (DECL_RTL (decl), 0)) != SYMBOL_REF)
break;
FORCE_TEXT;
fprintf (asmfile, "%s \"%s:%c", ASM_STABS_OP,
IDENTIFIER_POINTER (DECL_ASSEMBLER_NAME (decl)),
TREE_PUBLIC (decl) ? 'F' : 'f');
current_sym_code = N_FUN;
current_sym_addr = XEXP (DECL_RTL (decl), 0);
if (TREE_TYPE (type))
dbxout_type (TREE_TYPE (type), 0, 0);
else
dbxout_type (void_type_node, 0, 0);
/* For a nested function, when that function is compiled,
mention the containing function name
as well as (since dbx wants it) our own assembler-name. */
if (context != 0)
fprintf (asmfile, ",%s,%s",
IDENTIFIER_POINTER (DECL_ASSEMBLER_NAME (decl)),
IDENTIFIER_POINTER (DECL_NAME (context)));
dbxout_finish_symbol (decl);
break;
case TYPE_DECL:
#if 0
/* This seems all wrong. Outputting most kinds of types gives no name
at all. A true definition gives no name; a cross-ref for a
structure can give the tag name, but not a type name.
It seems that no typedef name is defined by outputting a type. */
/* If this typedef name was defined by outputting the type,
don't duplicate it. */
if (typevec[TYPE_SYMTAB_ADDRESS (type)] == TYPE_DEFINED
&& TYPE_NAME (TREE_TYPE (decl)) == decl)
return;
#endif
/* Don't output the same typedef twice.
And don't output what language-specific stuff doesn't want output. */
if (TREE_ASM_WRITTEN (decl) || TYPE_DECL_SUPPRESS_DEBUG (decl))
return;
FORCE_TEXT;
{
int tag_needed = 1;
int did_output = 0;
if (DECL_NAME (decl))
{
/* Nonzero means we must output a tag as well as a typedef. */
tag_needed = 0;
/* Handle the case of a C++ structure or union
where the TYPE_NAME is a TYPE_DECL
which gives both a typedef name and a tag. */
/* dbx requires the tag first and the typedef second. */
if ((TREE_CODE (type) == RECORD_TYPE
|| TREE_CODE (type) == UNION_TYPE
|| TREE_CODE (type) == QUAL_UNION_TYPE)
&& TYPE_NAME (type) == decl
&& !(use_gnu_debug_info_extensions && have_used_extensions)
&& !TREE_ASM_WRITTEN (TYPE_NAME (type))
/* Distinguish the implicit typedefs of C++
from explicit ones that might be found in C. */
&& (!strcmp (lang_identify (), "cplusplus")
/* The following line maybe unnecessary;
in 2.6, try removing it. */
|| DECL_SOURCE_LINE (decl) == 0))
{
tree name = TYPE_NAME (type);
if (TREE_CODE (name) == TYPE_DECL)
name = DECL_NAME (name);
current_sym_code = DBX_TYPE_DECL_STABS_CODE;
current_sym_value = 0;
current_sym_addr = 0;
current_sym_nchars = 2 + IDENTIFIER_LENGTH (name);
fprintf (asmfile, "%s \"%s:T", ASM_STABS_OP,
IDENTIFIER_POINTER (name));
dbxout_type (type, 1, 0);
dbxout_finish_symbol (NULL_TREE);
}
/* Output typedef name. */
fprintf (asmfile, "%s \"%s:", ASM_STABS_OP,
IDENTIFIER_POINTER (DECL_NAME (decl)));
/* Short cut way to output a tag also. */
if ((TREE_CODE (type) == RECORD_TYPE
|| TREE_CODE (type) == UNION_TYPE
|| TREE_CODE (type) == QUAL_UNION_TYPE)
&& TYPE_NAME (type) == decl)
{
if (use_gnu_debug_info_extensions && have_used_extensions)
{
putc ('T', asmfile);
TREE_ASM_WRITTEN (TYPE_NAME (type)) = 1;
}
#if 0 /* Now we generate the tag for this case up above. */
else
tag_needed = 1;
#endif
}
putc ('t', asmfile);
current_sym_code = DBX_TYPE_DECL_STABS_CODE;
dbxout_type (type, 1, 0);
dbxout_finish_symbol (decl);
did_output = 1;
}
/* Don't output a tag if this is an incomplete type (TYPE_SIZE is
zero). This prevents the sun4 Sun OS 4.x dbx from crashing. */
if (tag_needed && TYPE_NAME (type) != 0 && TYPE_SIZE (type) != 0
&& !TREE_ASM_WRITTEN (TYPE_NAME (type)))
{
/* For a TYPE_DECL with no name, but the type has a name,
output a tag.
This is what represents `struct foo' with no typedef. */
/* In C++, the name of a type is the corresponding typedef.
In C, it is an IDENTIFIER_NODE. */
tree name = TYPE_NAME (type);
if (TREE_CODE (name) == TYPE_DECL)
name = DECL_NAME (name);
current_sym_code = DBX_TYPE_DECL_STABS_CODE;
current_sym_value = 0;
current_sym_addr = 0;
current_sym_nchars = 2 + IDENTIFIER_LENGTH (name);
fprintf (asmfile, "%s \"%s:T", ASM_STABS_OP,
IDENTIFIER_POINTER (name));
dbxout_type (type, 1, 0);
dbxout_finish_symbol (NULL_TREE);
did_output = 1;
}
/* If an enum type has no name, it cannot be referred to,
but we must output it anyway, since the enumeration constants
can be referred to. */
if (!did_output && TREE_CODE (type) == ENUMERAL_TYPE)
{
current_sym_code = DBX_TYPE_DECL_STABS_CODE;
current_sym_value = 0;
current_sym_addr = 0;
current_sym_nchars = 2;
/* Some debuggers fail when given NULL names, so give this a
harmless name of ` '. */
fprintf (asmfile, "%s \" :T", ASM_STABS_OP);
dbxout_type (type, 1, 0);
dbxout_finish_symbol (NULL_TREE);
}
/* Prevent duplicate output of a typedef. */
TREE_ASM_WRITTEN (decl) = 1;
break;
}
case PARM_DECL:
/* Parm decls go in their own separate chains
and are output by dbxout_reg_parms and dbxout_parms. */
abort ();
case RESULT_DECL:
/* Named return value, treat like a VAR_DECL. */
case VAR_DECL:
if (DECL_RTL (decl) == 0)
return;
/* Don't mention a variable that is external.
Let the file that defines it describe it. */
if (DECL_EXTERNAL (decl))
break;
/* If the variable is really a constant
and not written in memory, inform the debugger. */
if (TREE_STATIC (decl) && TREE_READONLY (decl)
&& DECL_INITIAL (decl) != 0
&& ! TREE_ASM_WRITTEN (decl)
&& (DECL_FIELD_CONTEXT (decl) == NULL_TREE
|| TREE_CODE (DECL_FIELD_CONTEXT (decl)) == BLOCK))
{
if (TREE_PUBLIC (decl) == 0)
{
/* The sun4 assembler does not grok this. */
char *name = IDENTIFIER_POINTER (DECL_NAME (decl));
if (TREE_CODE (TREE_TYPE (decl)) == INTEGER_TYPE
|| TREE_CODE (TREE_TYPE (decl)) == ENUMERAL_TYPE)
{
HOST_WIDE_INT ival = TREE_INT_CST_LOW (DECL_INITIAL (decl));
#ifdef DBX_OUTPUT_CONSTANT_SYMBOL
DBX_OUTPUT_CONSTANT_SYMBOL (asmfile, name, ival);
#else
fprintf (asmfile, "%s \"%s:c=i%d\",0x%x,0,0,0\n",
ASM_STABS_OP, name, ival, N_LSYM);
#endif
return;
}
else if (TREE_CODE (TREE_TYPE (decl)) == REAL_TYPE)
{
/* don't know how to do this yet. */
}
break;
}
/* else it is something we handle like a normal variable. */
}
DECL_RTL (decl) = eliminate_regs (DECL_RTL (decl), 0, NULL_RTX);
#ifdef LEAF_REG_REMAP
if (leaf_function)
leaf_renumber_regs_insn (DECL_RTL (decl));
#endif
dbxout_symbol_location (decl, type, 0, DECL_RTL (decl));
default:
break;
}
}
/* Output the stab for DECL, a VAR_DECL, RESULT_DECL or PARM_DECL.
Add SUFFIX to its name, if SUFFIX is not 0.
Describe the variable as residing in HOME
(usually HOME is DECL_RTL (DECL), but not always). */
static void
dbxout_symbol_location (decl, type, suffix, home)
tree decl, type;
char *suffix;
rtx home;
{
int letter = 0;
int regno = -1;
/* Don't mention a variable at all
if it was completely optimized into nothingness.
If the decl was from an inline function, then it's rtl
is not identically the rtl that was used in this
particular compilation. */
if (GET_CODE (home) == REG)
{
regno = REGNO (home);
if (regno >= FIRST_PSEUDO_REGISTER)
return;
}
else if (GET_CODE (home) == SUBREG)
{
rtx value = home;
int offset = 0;
while (GET_CODE (value) == SUBREG)
{
offset += SUBREG_WORD (value);
value = SUBREG_REG (value);
}
if (GET_CODE (value) == REG)
{
regno = REGNO (value);
if (regno >= FIRST_PSEUDO_REGISTER)
return;
regno += offset;
}
alter_subreg (home);
}
/* The kind-of-variable letter depends on where
the variable is and on the scope of its name:
G and N_GSYM for static storage and global scope,
S for static storage and file scope,
V for static storage and local scope,
for those two, use N_LCSYM if data is in bss segment,
N_STSYM if in data segment, N_FUN otherwise.
(We used N_FUN originally, then changed to N_STSYM
to please GDB. However, it seems that confused ld.
Now GDB has been fixed to like N_FUN, says Kingdon.)
no letter at all, and N_LSYM, for auto variable,
r and N_RSYM for register variable. */
if (GET_CODE (home) == MEM
&& GET_CODE (XEXP (home, 0)) == SYMBOL_REF)
{
if (TREE_PUBLIC (decl))
{
letter = 'G';
current_sym_code = N_GSYM;
}
else
{
current_sym_addr = XEXP (home, 0);
letter = decl_function_context (decl) ? 'V' : 'S';
/* This should be the same condition as in assemble_variable, but
we don't have access to dont_output_data here. So, instead,
we rely on the fact that error_mark_node initializers always
end up in bss for C++ and never end up in bss for C. */
if (DECL_INITIAL (decl) == 0
|| (!strcmp (lang_identify (), "cplusplus")
&& DECL_INITIAL (decl) == error_mark_node))
current_sym_code = N_LCSYM;
else if (DECL_IN_TEXT_SECTION (decl))
/* This is not quite right, but it's the closest
of all the codes that Unix defines. */
current_sym_code = DBX_STATIC_CONST_VAR_CODE;
else
{
/* Ultrix `as' seems to need this. */
#ifdef DBX_STATIC_STAB_DATA_SECTION
data_section ();
#endif
current_sym_code = N_STSYM;
}
}
}
else if (regno >= 0)
{
letter = 'r';
current_sym_code = N_RSYM;
current_sym_value = DBX_REGISTER_NUMBER (regno);
}
else if (GET_CODE (home) == MEM
&& (GET_CODE (XEXP (home, 0)) == MEM
|| (GET_CODE (XEXP (home, 0)) == REG
&& REGNO (XEXP (home, 0)) != HARD_FRAME_POINTER_REGNUM)))
/* If the value is indirect by memory or by a register
that isn't the frame pointer
then it means the object is variable-sized and address through
that register or stack slot. DBX has no way to represent this
so all we can do is output the variable as a pointer.
If it's not a parameter, ignore it.
(VAR_DECLs like this can be made by integrate.c.) */
{
if (GET_CODE (XEXP (home, 0)) == REG)
{
letter = 'r';
current_sym_code = N_RSYM;
current_sym_value = DBX_REGISTER_NUMBER (REGNO (XEXP (home, 0)));
}
else
{
current_sym_code = N_LSYM;
/* RTL looks like (MEM (MEM (PLUS (REG...) (CONST_INT...)))).
We want the value of that CONST_INT. */
current_sym_value
= DEBUGGER_AUTO_OFFSET (XEXP (XEXP (home, 0), 0));
}
/* Effectively do build_pointer_type, but don't cache this type,
since it might be temporary whereas the type it points to
might have been saved for inlining. */
/* Don't use REFERENCE_TYPE because dbx can't handle that. */
type = make_node (POINTER_TYPE);
TREE_TYPE (type) = TREE_TYPE (decl);
}
else if (GET_CODE (home) == MEM
&& GET_CODE (XEXP (home, 0)) == REG)
{
current_sym_code = N_LSYM;
current_sym_value = DEBUGGER_AUTO_OFFSET (XEXP (home, 0));
}
else if (GET_CODE (home) == MEM
&& GET_CODE (XEXP (home, 0)) == PLUS
&& GET_CODE (XEXP (XEXP (home, 0), 1)) == CONST_INT)
{
current_sym_code = N_LSYM;
/* RTL looks like (MEM (PLUS (REG...) (CONST_INT...)))
We want the value of that CONST_INT. */
current_sym_value = DEBUGGER_AUTO_OFFSET (XEXP (home, 0));
}
else if (GET_CODE (home) == MEM
&& GET_CODE (XEXP (home, 0)) == CONST)
{
/* Handle an obscure case which can arise when optimizing and
when there are few available registers. (This is *always*
the case for i386/i486 targets). The RTL looks like
(MEM (CONST ...)) even though this variable is a local `auto'
or a local `register' variable. In effect, what has happened
is that the reload pass has seen that all assignments and
references for one such a local variable can be replaced by
equivalent assignments and references to some static storage
variable, thereby avoiding the need for a register. In such
cases we're forced to lie to debuggers and tell them that
this variable was itself `static'. */
current_sym_code = N_LCSYM;
letter = 'V';
current_sym_addr = XEXP (XEXP (home, 0), 0);
}
else if (GET_CODE (home) == CONCAT)
{
tree subtype = TREE_TYPE (type);
/* If the variable's storage is in two parts,
output each as a separate stab with a modified name. */
if (WORDS_BIG_ENDIAN)
dbxout_symbol_location (decl, subtype, "$imag", XEXP (home, 0));
else
dbxout_symbol_location (decl, subtype, "$real", XEXP (home, 0));
/* Cast avoids warning in old compilers. */
current_sym_code = (STAB_CODE_TYPE) 0;
current_sym_value = 0;
current_sym_addr = 0;
dbxout_prepare_symbol (decl);
if (WORDS_BIG_ENDIAN)
dbxout_symbol_location (decl, subtype, "$real", XEXP (home, 1));
else
dbxout_symbol_location (decl, subtype, "$imag", XEXP (home, 1));
return;
}
else
/* Address might be a MEM, when DECL is a variable-sized object.
Or it might be const0_rtx, meaning previous passes
want us to ignore this variable. */
return;
/* Ok, start a symtab entry and output the variable name. */
FORCE_TEXT;
#ifdef DBX_STATIC_BLOCK_START
DBX_STATIC_BLOCK_START (asmfile, current_sym_code);
#endif
dbxout_symbol_name (decl, suffix, letter);
dbxout_type (type, 0, 0);
dbxout_finish_symbol (decl);
#ifdef DBX_STATIC_BLOCK_END
DBX_STATIC_BLOCK_END (asmfile, current_sym_code);
#endif
}
/* Output the symbol name of DECL for a stabs, with suffix SUFFIX.
Then output LETTER to indicate the kind of location the symbol has. */
static void
dbxout_symbol_name (decl, suffix, letter)
tree decl;
char *suffix;
int letter;
{
/* One slight hitch: if this is a VAR_DECL which is a static
class member, we must put out the mangled name instead of the
DECL_NAME. */
char *name;
/* Note also that static member (variable) names DO NOT begin
with underscores in .stabs directives. */
if (DECL_LANG_SPECIFIC (decl))
name = IDENTIFIER_POINTER (DECL_ASSEMBLER_NAME (decl));
else
name = IDENTIFIER_POINTER (DECL_NAME (decl));
if (name == 0)
name = "(anon)";
fprintf (asmfile, "%s \"%s%s:", ASM_STABS_OP, name,
(suffix ? suffix : ""));
if (letter) putc (letter, asmfile);
}
static void
dbxout_prepare_symbol (decl)
tree decl;
{
#ifdef WINNING_GDB
char *filename = DECL_SOURCE_FILE (decl);
dbxout_source_file (asmfile, filename);
#endif
}
static void
dbxout_finish_symbol (sym)
tree sym;
{
#ifdef DBX_FINISH_SYMBOL
DBX_FINISH_SYMBOL (sym);
#else
int line = 0;
if (use_gnu_debug_info_extensions && sym != 0)
line = DECL_SOURCE_LINE (sym);
fprintf (asmfile, "\",%d,0,%d,", current_sym_code, line);
if (current_sym_addr)
output_addr_const (asmfile, current_sym_addr);
else
fprintf (asmfile, "%d", current_sym_value);
putc ('\n', asmfile);
#endif
}
/* Output definitions of all the decls in a chain. */
void
dbxout_syms (syms)
tree syms;
{
while (syms)
{
dbxout_symbol (syms, 1);
syms = TREE_CHAIN (syms);
}
}
/* The following two functions output definitions of function parameters.
Each parameter gets a definition locating it in the parameter list.
Each parameter that is a register variable gets a second definition
locating it in the register.
Printing or argument lists in gdb uses the definitions that
locate in the parameter list. But reference to the variable in
expressions uses preferentially the definition as a register. */
/* Output definitions, referring to storage in the parmlist,
of all the parms in PARMS, which is a chain of PARM_DECL nodes. */
void
dbxout_parms (parms)
tree parms;
{
for (; parms; parms = TREE_CHAIN (parms))
if (DECL_NAME (parms) && TREE_TYPE (parms) != error_mark_node)
{
dbxout_prepare_symbol (parms);
/* Perform any necessary register eliminations on the parameter's rtl,
so that the debugging output will be accurate. */
DECL_INCOMING_RTL (parms)
= eliminate_regs (DECL_INCOMING_RTL (parms), 0, NULL_RTX);
DECL_RTL (parms) = eliminate_regs (DECL_RTL (parms), 0, NULL_RTX);
#ifdef LEAF_REG_REMAP
if (leaf_function)
{
leaf_renumber_regs_insn (DECL_INCOMING_RTL (parms));
leaf_renumber_regs_insn (DECL_RTL (parms));
}
#endif
if (PARM_PASSED_IN_MEMORY (parms))
{
rtx addr = XEXP (DECL_INCOMING_RTL (parms), 0);
/* ??? Here we assume that the parm address is indexed
off the frame pointer or arg pointer.
If that is not true, we produce meaningless results,
but do not crash. */
if (GET_CODE (addr) == PLUS
&& GET_CODE (XEXP (addr, 1)) == CONST_INT)
current_sym_value = INTVAL (XEXP (addr, 1));
else
current_sym_value = 0;
current_sym_code = N_PSYM;
current_sym_addr = 0;
FORCE_TEXT;
if (DECL_NAME (parms))
{
current_sym_nchars = 2 + IDENTIFIER_LENGTH (DECL_NAME (parms));
fprintf (asmfile, "%s \"%s:%c", ASM_STABS_OP,
IDENTIFIER_POINTER (DECL_NAME (parms)),
DBX_MEMPARM_STABS_LETTER);
}
else
{
current_sym_nchars = 8;
fprintf (asmfile, "%s \"(anon):%c", ASM_STABS_OP,
DBX_MEMPARM_STABS_LETTER);
}
if (GET_CODE (DECL_RTL (parms)) == REG
&& REGNO (DECL_RTL (parms)) >= 0
&& REGNO (DECL_RTL (parms)) < FIRST_PSEUDO_REGISTER)
dbxout_type (DECL_ARG_TYPE (parms), 0, 0);
else
{
int original_value = current_sym_value;
/* This is the case where the parm is passed as an int or double
and it is converted to a char, short or float and stored back
in the parmlist. In this case, describe the parm
with the variable's declared type, and adjust the address
if the least significant bytes (which we are using) are not
the first ones. */
#if BYTES_BIG_ENDIAN
if (TREE_TYPE (parms) != DECL_ARG_TYPE (parms))
current_sym_value += (GET_MODE_SIZE (TYPE_MODE (DECL_ARG_TYPE (parms)))
- GET_MODE_SIZE (GET_MODE (DECL_RTL (parms))));
#endif
if (GET_CODE (DECL_RTL (parms)) == MEM
&& GET_CODE (XEXP (DECL_RTL (parms), 0)) == PLUS
&& GET_CODE (XEXP (XEXP (DECL_RTL (parms), 0), 1)) == CONST_INT
&& INTVAL (XEXP (XEXP (DECL_RTL (parms), 0), 1)) == current_sym_value)
dbxout_type (TREE_TYPE (parms), 0, 0);
else
{
current_sym_value = original_value;
dbxout_type (DECL_ARG_TYPE (parms), 0, 0);
}
}
current_sym_value = DEBUGGER_ARG_OFFSET (current_sym_value, addr);
dbxout_finish_symbol (parms);
}
else if (GET_CODE (DECL_RTL (parms)) == REG)
{
rtx best_rtl;
char regparm_letter;
tree parm_type;
/* Parm passed in registers and lives in registers or nowhere. */
current_sym_code = DBX_REGPARM_STABS_CODE;
regparm_letter = DBX_REGPARM_STABS_LETTER;
current_sym_addr = 0;
/* If parm lives in a register, use that register;
pretend the parm was passed there. It would be more consistent
to describe the register where the parm was passed,
but in practice that register usually holds something else.
If we use DECL_RTL, then we must use the declared type of
the variable, not the type that it arrived in. */
if (REGNO (DECL_RTL (parms)) >= 0
&& REGNO (DECL_RTL (parms)) < FIRST_PSEUDO_REGISTER)
{
best_rtl = DECL_RTL (parms);
parm_type = TREE_TYPE (parms);
}
/* If the parm lives nowhere, use the register where it was
passed. It is also better to use the declared type here. */
else
{
best_rtl = DECL_INCOMING_RTL (parms);
parm_type = TREE_TYPE (parms);
}
current_sym_value = DBX_REGISTER_NUMBER (REGNO (best_rtl));
FORCE_TEXT;
if (DECL_NAME (parms))
{
current_sym_nchars = 2 + IDENTIFIER_LENGTH (DECL_NAME (parms));
fprintf (asmfile, "%s \"%s:%c", ASM_STABS_OP,
IDENTIFIER_POINTER (DECL_NAME (parms)),
regparm_letter);
}
else
{
current_sym_nchars = 8;
fprintf (asmfile, "%s \"(anon):%c", ASM_STABS_OP,
regparm_letter);
}
dbxout_type (parm_type, 0, 0);
dbxout_finish_symbol (parms);
}
else if (GET_CODE (DECL_RTL (parms)) == MEM
&& GET_CODE (XEXP (DECL_RTL (parms), 0)) == REG
&& REGNO (XEXP (DECL_RTL (parms), 0)) != HARD_FRAME_POINTER_REGNUM
&& REGNO (XEXP (DECL_RTL (parms), 0)) != STACK_POINTER_REGNUM
#if ARG_POINTER_REGNUM != HARD_FRAME_POINTER_REGNUM
&& REGNO (XEXP (DECL_RTL (parms), 0)) != ARG_POINTER_REGNUM
#endif
)
{
/* Parm was passed via invisible reference.
That is, its address was passed in a register.
Output it as if it lived in that register.
The debugger will know from the type
that it was actually passed by invisible reference. */
char regparm_letter;
/* Parm passed in registers and lives in registers or nowhere. */
current_sym_code = DBX_REGPARM_STABS_CODE;
regparm_letter = DBX_REGPARM_STABS_LETTER;
/* DECL_RTL looks like (MEM (REG...). Get the register number.
If it is an unallocated pseudo-reg, then use the register where
it was passed instead. */
if (REGNO (XEXP (DECL_RTL (parms), 0)) >= 0
&& REGNO (XEXP (DECL_RTL (parms), 0)) < FIRST_PSEUDO_REGISTER)
current_sym_value = REGNO (XEXP (DECL_RTL (parms), 0));
else
current_sym_value = REGNO (DECL_INCOMING_RTL (parms));
current_sym_addr = 0;
FORCE_TEXT;
if (DECL_NAME (parms))
{
current_sym_nchars = 2 + strlen (IDENTIFIER_POINTER (DECL_NAME (parms)));
fprintf (asmfile, "%s \"%s:%c", ASM_STABS_OP,
IDENTIFIER_POINTER (DECL_NAME (parms)),
DBX_REGPARM_STABS_LETTER);
}
else
{
current_sym_nchars = 8;
fprintf (asmfile, "%s \"(anon):%c", ASM_STABS_OP,
DBX_REGPARM_STABS_LETTER);
}
dbxout_type (TREE_TYPE (parms), 0, 0);
dbxout_finish_symbol (parms);
}
else if (GET_CODE (DECL_RTL (parms)) == MEM
&& XEXP (DECL_RTL (parms), 0) != const0_rtx
/* ??? A constant address for a parm can happen
when the reg it lives in is equiv to a constant in memory.
Should make this not happen, after 2.4. */
&& ! CONSTANT_P (XEXP (DECL_RTL (parms), 0)))
{
/* Parm was passed in registers but lives on the stack. */
current_sym_code = N_PSYM;
/* DECL_RTL looks like (MEM (PLUS (REG...) (CONST_INT...))),
in which case we want the value of that CONST_INT,
or (MEM (REG ...)) or (MEM (MEM ...)),
in which case we use a value of zero. */
if (GET_CODE (XEXP (DECL_RTL (parms), 0)) == REG
|| GET_CODE (XEXP (DECL_RTL (parms), 0)) == MEM)
current_sym_value = 0;
else
current_sym_value = INTVAL (XEXP (XEXP (DECL_RTL (parms), 0), 1));
current_sym_addr = 0;
FORCE_TEXT;
if (DECL_NAME (parms))
{
current_sym_nchars = 2 + strlen (IDENTIFIER_POINTER (DECL_NAME (parms)));
fprintf (asmfile, "%s \"%s:%c", ASM_STABS_OP,
IDENTIFIER_POINTER (DECL_NAME (parms)),
DBX_MEMPARM_STABS_LETTER);
}
else
{
current_sym_nchars = 8;
fprintf (asmfile, "%s \"(anon):%c", ASM_STABS_OP,
DBX_MEMPARM_STABS_LETTER);
}
current_sym_value
= DEBUGGER_ARG_OFFSET (current_sym_value,
XEXP (DECL_RTL (parms), 0));
dbxout_type (TREE_TYPE (parms), 0, 0);
dbxout_finish_symbol (parms);
}
}
}
/* Output definitions for the places where parms live during the function,
when different from where they were passed, when the parms were passed
in memory.
It is not useful to do this for parms passed in registers
that live during the function in different registers, because it is
impossible to look in the passed register for the passed value,
so we use the within-the-function register to begin with.
PARMS is a chain of PARM_DECL nodes. */
void
dbxout_reg_parms (parms)
tree parms;
{
for (; parms; parms = TREE_CHAIN (parms))
if (DECL_NAME (parms))
{
dbxout_prepare_symbol (parms);
/* Report parms that live in registers during the function
but were passed in memory. */
if (GET_CODE (DECL_RTL (parms)) == REG
&& REGNO (DECL_RTL (parms)) >= 0
&& REGNO (DECL_RTL (parms)) < FIRST_PSEUDO_REGISTER
&& PARM_PASSED_IN_MEMORY (parms))
dbxout_symbol_location (parms, TREE_TYPE (parms),
0, DECL_RTL (parms));
else if (GET_CODE (DECL_RTL (parms)) == CONCAT
&& PARM_PASSED_IN_MEMORY (parms))
dbxout_symbol_location (parms, TREE_TYPE (parms),
0, DECL_RTL (parms));
/* Report parms that live in memory but not where they were passed. */
else if (GET_CODE (DECL_RTL (parms)) == MEM
&& GET_CODE (XEXP (DECL_RTL (parms), 0)) == PLUS
&& GET_CODE (XEXP (XEXP (DECL_RTL (parms), 0), 1)) == CONST_INT
&& PARM_PASSED_IN_MEMORY (parms)
&& ! rtx_equal_p (DECL_RTL (parms), DECL_INCOMING_RTL (parms)))
{
#if 0 /* ??? It is not clear yet what should replace this. */
int offset = DECL_OFFSET (parms) / BITS_PER_UNIT;
/* A parm declared char is really passed as an int,
so it occupies the least significant bytes.
On a big-endian machine those are not the low-numbered ones. */
#if BYTES_BIG_ENDIAN
if (offset != -1 && TREE_TYPE (parms) != DECL_ARG_TYPE (parms))
offset += (GET_MODE_SIZE (TYPE_MODE (DECL_ARG_TYPE (parms)))
- GET_MODE_SIZE (GET_MODE (DECL_RTL (parms))));
#endif
if (INTVAL (XEXP (XEXP (DECL_RTL (parms), 0), 1)) != offset) {...}
#endif
dbxout_symbol_location (parms, TREE_TYPE (parms),
0, DECL_RTL (parms));
}
#if 0
else if (GET_CODE (DECL_RTL (parms)) == MEM
&& GET_CODE (XEXP (DECL_RTL (parms), 0)) == REG)
{
/* Parm was passed via invisible reference.
That is, its address was passed in a register.
Output it as if it lived in that register.
The debugger will know from the type
that it was actually passed by invisible reference. */
current_sym_code = N_RSYM;
/* DECL_RTL looks like (MEM (REG...). Get the register number. */
current_sym_value = REGNO (XEXP (DECL_RTL (parms), 0));
current_sym_addr = 0;
FORCE_TEXT;
if (DECL_NAME (parms))
{
current_sym_nchars = 2 + strlen (IDENTIFIER_POINTER (DECL_NAME (parms)));
fprintf (asmfile, "%s \"%s:r", ASM_STABS_OP,
IDENTIFIER_POINTER (DECL_NAME (parms)));
}
else
{
current_sym_nchars = 8;
fprintf (asmfile, "%s \"(anon):r", ASM_STABS_OP);
}
dbxout_type (TREE_TYPE (parms), 0, 0);
dbxout_finish_symbol (parms);
}
#endif
}
}
/* Given a chain of ..._TYPE nodes (as come in a parameter list),
output definitions of those names, in raw form */
void
dbxout_args (args)
tree args;
{
while (args)
{
putc (',', asmfile);
dbxout_type (TREE_VALUE (args), 0, 0);
CHARS (1);
args = TREE_CHAIN (args);
}
}
/* Given a chain of ..._TYPE nodes,
find those which have typedef names and output those names.
This is to ensure those types get output. */
void
dbxout_types (types)
register tree types;
{
while (types)
{
if (TYPE_NAME (types)
&& TREE_CODE (TYPE_NAME (types)) == TYPE_DECL
&& ! TREE_ASM_WRITTEN (TYPE_NAME (types)))
dbxout_symbol (TYPE_NAME (types), 1);
types = TREE_CHAIN (types);
}
}
/* Output everything about a symbol block (a BLOCK node
that represents a scope level),
including recursive output of contained blocks.
BLOCK is the BLOCK node.
DEPTH is its depth within containing symbol blocks.
ARGS is usually zero; but for the outermost block of the
body of a function, it is a chain of PARM_DECLs for the function parameters.
We output definitions of all the register parms
as if they were local variables of that block.
If -g1 was used, we count blocks just the same, but output nothing
except for the outermost block.
Actually, BLOCK may be several blocks chained together.
We handle them all in sequence. */
static void
dbxout_block (block, depth, args)
register tree block;
int depth;
tree args;
{
int blocknum;
while (block)
{
/* Ignore blocks never expanded or otherwise marked as real. */
if (TREE_USED (block))
{
#ifndef DBX_LBRAC_FIRST
/* In dbx format, the syms of a block come before the N_LBRAC. */
if (debug_info_level != DINFO_LEVEL_TERSE || depth == 0)
dbxout_syms (BLOCK_VARS (block));
if (args)
dbxout_reg_parms (args);
#endif
/* Now output an N_LBRAC symbol to represent the beginning of
the block. Use the block's tree-walk order to generate
the assembler symbols LBBn and LBEn
that final will define around the code in this block. */
if (depth > 0 && debug_info_level != DINFO_LEVEL_TERSE)
{
char buf[20];
blocknum = next_block_number++;
ASM_GENERATE_INTERNAL_LABEL (buf, "LBB", blocknum);
if (BLOCK_HANDLER_BLOCK (block))
{
/* A catch block. Must precede N_LBRAC. */
tree decl = BLOCK_VARS (block);
while (decl)
{
#ifdef DBX_OUTPUT_CATCH
DBX_OUTPUT_CATCH (asmfile, decl, buf);
#else
fprintf (asmfile, "%s \"%s:C1\",%d,0,0,", ASM_STABS_OP,
IDENTIFIER_POINTER (DECL_NAME (decl)), N_CATCH);
assemble_name (asmfile, buf);
fprintf (asmfile, "\n");
#endif
decl = TREE_CHAIN (decl);
}
}
#ifdef DBX_OUTPUT_LBRAC
DBX_OUTPUT_LBRAC (asmfile, buf);
#else
fprintf (asmfile, "%s %d,0,0,", ASM_STABN_OP, N_LBRAC);
assemble_name (asmfile, buf);
#if DBX_BLOCKS_FUNCTION_RELATIVE
fputc ('-', asmfile);
assemble_name (asmfile, XSTR (XEXP (DECL_RTL (current_function_decl), 0), 0));
#endif
fprintf (asmfile, "\n");
#endif
}
else if (depth > 0)
/* Count blocks the same way regardless of debug_info_level. */
next_block_number++;
#ifdef DBX_LBRAC_FIRST
/* On some weird machines, the syms of a block
come after the N_LBRAC. */
if (debug_info_level != DINFO_LEVEL_TERSE || depth == 0)
dbxout_syms (BLOCK_VARS (block));
if (args)
dbxout_reg_parms (args);
#endif
/* Output the subblocks. */
dbxout_block (BLOCK_SUBBLOCKS (block), depth + 1, NULL_TREE);
/* Refer to the marker for the end of the block. */
if (depth > 0 && debug_info_level != DINFO_LEVEL_TERSE)
{
char buf[20];
ASM_GENERATE_INTERNAL_LABEL (buf, "LBE", blocknum);
#ifdef DBX_OUTPUT_RBRAC
DBX_OUTPUT_RBRAC (asmfile, buf);
#else
fprintf (asmfile, "%s %d,0,0,", ASM_STABN_OP, N_RBRAC);
assemble_name (asmfile, buf);
#if DBX_BLOCKS_FUNCTION_RELATIVE
fputc ('-', asmfile);
assemble_name (asmfile, XSTR (XEXP (DECL_RTL (current_function_decl), 0), 0));
#endif
fprintf (asmfile, "\n");
#endif
}
}
block = BLOCK_CHAIN (block);
}
}
/* Output the information about a function and its arguments and result.
Usually this follows the function's code,
but on some systems, it comes before. */
static void
dbxout_really_begin_function (decl)
tree decl;
{
dbxout_symbol (decl, 0);
dbxout_parms (DECL_ARGUMENTS (decl));
if (DECL_NAME (DECL_RESULT (decl)) != 0)
dbxout_symbol (DECL_RESULT (decl), 1);
}
/* Called at beginning of output of function definition. */
void
dbxout_begin_function (decl)
tree decl;
{
#ifdef DBX_FUNCTION_FIRST
dbxout_really_begin_function (decl);
#endif
}
/* Output dbx data for a function definition.
This includes a definition of the function name itself (a symbol),
definitions of the parameters (locating them in the parameter list)
and then output the block that makes up the function's body
(including all the auto variables of the function). */
void
dbxout_function (decl)
tree decl;
{
#ifndef DBX_FUNCTION_FIRST
dbxout_really_begin_function (decl);
#endif
dbxout_block (DECL_INITIAL (decl), 0, DECL_ARGUMENTS (decl));
#ifdef DBX_OUTPUT_FUNCTION_END
DBX_OUTPUT_FUNCTION_END (asmfile, decl);
#endif
}
#endif /* DBX_DEBUGGING_INFO */
Reference in New Issue View Git Blame Copy Permalink