dd0b4fb6d5
every architecture's busdma_machdep.c. It is done by unifying the bus_dmamap_load_buffer() routines so that they may be called from MI code. The MD busdma is then given a chance to do any final processing in the complete() callback. The cam changes unify the bus_dmamap_load* handling in cam drivers. The arm and mips implementations are updated to track virtual addresses for sync(). Previously this was done in a type specific way. Now it is done in a generic way by recording the list of virtuals in the map. Submitted by: jeff (sponsored by EMC/Isilon) Reviewed by: kan (previous version), scottl, mjacob (isp(4), no objections for target mode changes) Discussed with: ian (arm changes) Tested by: marius (sparc64), mips (jmallet), isci(4) on x86 (jharris), amd64 (Fabian Keil <freebsd-listen@fabiankeil.de>)
1599 lines
40 KiB
C
1599 lines
40 KiB
C
/*-
|
|
* Copyright (c) 1999 Luoqi Chen.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/bus.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <cam/cam.h>
|
|
#include <cam/cam_ccb.h>
|
|
#include <cam/cam_sim.h>
|
|
#include <cam/cam_xpt_sim.h>
|
|
#include <cam/cam_debug.h>
|
|
|
|
#include <cam/scsi/scsi_message.h>
|
|
|
|
#include <dev/aic/aic6360reg.h>
|
|
#include <dev/aic/aicvar.h>
|
|
|
|
static void aic_action(struct cam_sim *sim, union ccb *ccb);
|
|
static void aic_execute_scb(void *arg, bus_dma_segment_t *dm_segs,
|
|
int nseg, int error);
|
|
static void aic_intr_locked(struct aic_softc *aic);
|
|
static void aic_start(struct aic_softc *aic);
|
|
static void aic_select(struct aic_softc *aic);
|
|
static void aic_selected(struct aic_softc *aic);
|
|
static void aic_reselected(struct aic_softc *aic);
|
|
static void aic_reconnect(struct aic_softc *aic, int tag);
|
|
static void aic_cmd(struct aic_softc *aic);
|
|
static void aic_msgin(struct aic_softc *aic);
|
|
static void aic_handle_msgin(struct aic_softc *aic);
|
|
static void aic_msgout(struct aic_softc *aic);
|
|
static void aic_datain(struct aic_softc *aic);
|
|
static void aic_dataout(struct aic_softc *aic);
|
|
static void aic_done(struct aic_softc *aic, struct aic_scb *scb);
|
|
static void aic_poll(struct cam_sim *sim);
|
|
static void aic_timeout(void *arg);
|
|
static void aic_scsi_reset(struct aic_softc *aic);
|
|
static void aic_chip_reset(struct aic_softc *aic);
|
|
static void aic_reset(struct aic_softc *aic, int initiate_reset);
|
|
|
|
devclass_t aic_devclass;
|
|
|
|
static struct aic_scb *
|
|
aic_get_scb(struct aic_softc *aic)
|
|
{
|
|
struct aic_scb *scb;
|
|
|
|
if (!dumping)
|
|
mtx_assert(&aic->lock, MA_OWNED);
|
|
if ((scb = SLIST_FIRST(&aic->free_scbs)) != NULL)
|
|
SLIST_REMOVE_HEAD(&aic->free_scbs, link);
|
|
return (scb);
|
|
}
|
|
|
|
static void
|
|
aic_free_scb(struct aic_softc *aic, struct aic_scb *scb)
|
|
{
|
|
|
|
if (!dumping)
|
|
mtx_assert(&aic->lock, MA_OWNED);
|
|
if ((aic->flags & AIC_RESOURCE_SHORTAGE) != 0 &&
|
|
(scb->ccb->ccb_h.status & CAM_RELEASE_SIMQ) == 0) {
|
|
scb->ccb->ccb_h.status |= CAM_RELEASE_SIMQ;
|
|
aic->flags &= ~AIC_RESOURCE_SHORTAGE;
|
|
}
|
|
scb->flags = 0;
|
|
SLIST_INSERT_HEAD(&aic->free_scbs, scb, link);
|
|
}
|
|
|
|
static void
|
|
aic_action(struct cam_sim *sim, union ccb *ccb)
|
|
{
|
|
struct aic_softc *aic;
|
|
|
|
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("aic_action\n"));
|
|
|
|
aic = (struct aic_softc *)cam_sim_softc(sim);
|
|
mtx_assert(&aic->lock, MA_OWNED);
|
|
|
|
switch (ccb->ccb_h.func_code) {
|
|
case XPT_SCSI_IO: /* Execute the requested I/O operation */
|
|
case XPT_RESET_DEV: /* Bus Device Reset the specified SCSI device */
|
|
{
|
|
struct aic_scb *scb;
|
|
|
|
if ((scb = aic_get_scb(aic)) == NULL) {
|
|
aic->flags |= AIC_RESOURCE_SHORTAGE;
|
|
xpt_freeze_simq(aic->sim, /*count*/1);
|
|
ccb->ccb_h.status = CAM_REQUEUE_REQ;
|
|
xpt_done(ccb);
|
|
return;
|
|
}
|
|
|
|
scb->ccb = ccb;
|
|
ccb->ccb_h.ccb_scb_ptr = scb;
|
|
ccb->ccb_h.ccb_aic_ptr = aic;
|
|
|
|
scb->target = ccb->ccb_h.target_id;
|
|
scb->lun = ccb->ccb_h.target_lun;
|
|
|
|
if (ccb->ccb_h.func_code == XPT_SCSI_IO) {
|
|
scb->cmd_len = ccb->csio.cdb_len;
|
|
if (ccb->ccb_h.flags & CAM_CDB_POINTER) {
|
|
if (ccb->ccb_h.flags & CAM_CDB_PHYS) {
|
|
ccb->ccb_h.status = CAM_REQ_INVALID;
|
|
aic_free_scb(aic, scb);
|
|
xpt_done(ccb);
|
|
return;
|
|
}
|
|
scb->cmd_ptr = ccb->csio.cdb_io.cdb_ptr;
|
|
} else {
|
|
scb->cmd_ptr = ccb->csio.cdb_io.cdb_bytes;
|
|
}
|
|
if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
|
|
if ((ccb->ccb_h.flags & CAM_DATA_MASK) !=
|
|
CAM_DATA_VADDR) {
|
|
ccb->ccb_h.status = CAM_REQ_INVALID;
|
|
aic_free_scb(aic, scb);
|
|
xpt_done(ccb);
|
|
return;
|
|
}
|
|
scb->data_ptr = ccb->csio.data_ptr;
|
|
scb->data_len = ccb->csio.dxfer_len;
|
|
} else {
|
|
scb->data_ptr = NULL;
|
|
scb->data_len = 0;
|
|
}
|
|
aic_execute_scb(scb, NULL, 0, 0);
|
|
} else {
|
|
scb->flags |= SCB_DEVICE_RESET;
|
|
aic_execute_scb(scb, NULL, 0, 0);
|
|
}
|
|
break;
|
|
}
|
|
case XPT_SET_TRAN_SETTINGS:
|
|
{
|
|
struct ccb_trans_settings *cts = &ccb->cts;
|
|
struct aic_tinfo *ti = &aic->tinfo[ccb->ccb_h.target_id];
|
|
struct ccb_trans_settings_scsi *scsi =
|
|
&cts->proto_specific.scsi;
|
|
struct ccb_trans_settings_spi *spi =
|
|
&cts->xport_specific.spi;
|
|
|
|
if ((spi->valid & CTS_SPI_VALID_DISC) != 0 &&
|
|
(aic->flags & AIC_DISC_ENABLE) != 0) {
|
|
if ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0)
|
|
ti->flags |= TINFO_DISC_ENB;
|
|
else
|
|
ti->flags &= ~TINFO_DISC_ENB;
|
|
}
|
|
|
|
if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) {
|
|
if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0)
|
|
ti->flags |= TINFO_TAG_ENB;
|
|
else
|
|
ti->flags &= ~TINFO_TAG_ENB;
|
|
}
|
|
|
|
if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0) {
|
|
ti->goal.period = spi->sync_period;
|
|
|
|
if (ti->goal.period > aic->min_period) {
|
|
ti->goal.period = 0;
|
|
ti->goal.offset = 0;
|
|
} else if (ti->goal.period < aic->max_period)
|
|
ti->goal.period = aic->max_period;
|
|
}
|
|
|
|
if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0) {
|
|
ti->goal.offset = spi->sync_offset;
|
|
if (ti->goal.offset == 0)
|
|
ti->goal.period = 0;
|
|
else if (ti->goal.offset > AIC_SYNC_OFFSET)
|
|
ti->goal.offset = AIC_SYNC_OFFSET;
|
|
}
|
|
|
|
if ((ti->goal.period != ti->current.period)
|
|
|| (ti->goal.offset != ti->current.offset))
|
|
ti->flags |= TINFO_SDTR_NEGO;
|
|
|
|
ccb->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(ccb);
|
|
break;
|
|
}
|
|
case XPT_GET_TRAN_SETTINGS:
|
|
{
|
|
struct ccb_trans_settings *cts = &ccb->cts;
|
|
struct aic_tinfo *ti = &aic->tinfo[ccb->ccb_h.target_id];
|
|
struct ccb_trans_settings_scsi *scsi =
|
|
&cts->proto_specific.scsi;
|
|
struct ccb_trans_settings_spi *spi =
|
|
&cts->xport_specific.spi;
|
|
|
|
cts->protocol = PROTO_SCSI;
|
|
cts->protocol_version = SCSI_REV_2;
|
|
cts->transport = XPORT_SPI;
|
|
cts->transport_version = 2;
|
|
scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB;
|
|
spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB;
|
|
|
|
if ((ti->flags & TINFO_DISC_ENB) != 0)
|
|
spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
|
|
if ((ti->flags & TINFO_TAG_ENB) != 0)
|
|
scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
|
|
|
|
if (cts->type == CTS_TYPE_CURRENT_SETTINGS) {
|
|
spi->sync_period = ti->current.period;
|
|
spi->sync_offset = ti->current.offset;
|
|
} else {
|
|
spi->sync_period = ti->user.period;
|
|
spi->sync_offset = ti->user.offset;
|
|
}
|
|
|
|
spi->bus_width = MSG_EXT_WDTR_BUS_8_BIT;
|
|
spi->valid = CTS_SPI_VALID_SYNC_RATE
|
|
| CTS_SPI_VALID_SYNC_OFFSET
|
|
| CTS_SPI_VALID_BUS_WIDTH
|
|
| CTS_SPI_VALID_DISC;
|
|
scsi->valid = CTS_SCSI_VALID_TQ;
|
|
|
|
ccb->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(ccb);
|
|
break;
|
|
}
|
|
case XPT_CALC_GEOMETRY:
|
|
{
|
|
cam_calc_geometry(&ccb->ccg, /*extended*/1);
|
|
xpt_done(ccb);
|
|
break;
|
|
}
|
|
case XPT_RESET_BUS: /* Reset the specified SCSI bus */
|
|
aic_reset(aic, /*initiate_reset*/TRUE);
|
|
ccb->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(ccb);
|
|
break;
|
|
case XPT_PATH_INQ: /* Path routing inquiry */
|
|
{
|
|
struct ccb_pathinq *cpi = &ccb->cpi;
|
|
|
|
cpi->version_num = 1; /* XXX??? */
|
|
cpi->hba_inquiry = PI_SDTR_ABLE | PI_TAG_ABLE;
|
|
cpi->target_sprt = 0;
|
|
cpi->hba_misc = 0;
|
|
cpi->hba_eng_cnt = 0;
|
|
cpi->max_target = 7;
|
|
cpi->max_lun = 7;
|
|
cpi->initiator_id = aic->initiator;
|
|
cpi->bus_id = cam_sim_bus(sim);
|
|
cpi->base_transfer_speed = 3300;
|
|
strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
|
|
strncpy(cpi->hba_vid, "Adaptec", HBA_IDLEN);
|
|
strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
|
|
cpi->unit_number = cam_sim_unit(sim);
|
|
cpi->transport = XPORT_SPI;
|
|
cpi->transport_version = 2;
|
|
cpi->protocol = PROTO_SCSI;
|
|
cpi->protocol_version = SCSI_REV_2;
|
|
cpi->ccb_h.status = CAM_REQ_CMP;
|
|
xpt_done(ccb);
|
|
break;
|
|
}
|
|
default:
|
|
ccb->ccb_h.status = CAM_REQ_INVALID;
|
|
xpt_done(ccb);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
aic_execute_scb(void *arg, bus_dma_segment_t *dm_segs, int nseg, int error)
|
|
{
|
|
struct aic_scb *scb = (struct aic_scb *)arg;
|
|
union ccb *ccb = scb->ccb;
|
|
struct aic_softc *aic = (struct aic_softc *)ccb->ccb_h.ccb_aic_ptr;
|
|
|
|
if (!dumping)
|
|
mtx_assert(&aic->lock, MA_OWNED);
|
|
if (ccb->ccb_h.status != CAM_REQ_INPROG) {
|
|
aic_free_scb(aic, scb);
|
|
xpt_done(ccb);
|
|
return;
|
|
}
|
|
|
|
scb->flags |= SCB_ACTIVE;
|
|
ccb->ccb_h.status |= CAM_SIM_QUEUED;
|
|
TAILQ_INSERT_TAIL(&aic->pending_ccbs, &ccb->ccb_h, sim_links.tqe);
|
|
|
|
callout_reset(&scb->timer, (ccb->ccb_h.timeout * hz) / 1000,
|
|
aic_timeout, scb);
|
|
|
|
aic_start(aic);
|
|
}
|
|
|
|
/*
|
|
* Start another command if the controller is not busy.
|
|
*/
|
|
static void
|
|
aic_start(struct aic_softc *aic)
|
|
{
|
|
struct ccb_hdr *ccb_h;
|
|
struct aic_tinfo *ti;
|
|
|
|
if (aic->state != AIC_IDLE)
|
|
return;
|
|
|
|
TAILQ_FOREACH(ccb_h, &aic->pending_ccbs, sim_links.tqe) {
|
|
ti = &aic->tinfo[ccb_h->target_id];
|
|
if ((ti->lubusy & (1 << ccb_h->target_lun)) == 0) {
|
|
TAILQ_REMOVE(&aic->pending_ccbs, ccb_h, sim_links.tqe);
|
|
aic->nexus = (struct aic_scb *)ccb_h->ccb_scb_ptr;
|
|
aic_select(aic);
|
|
return;
|
|
}
|
|
}
|
|
|
|
CAM_DEBUG_PRINT(CAM_DEBUG_TRACE, ("aic_start: idle\n"));
|
|
|
|
aic_outb(aic, SIMODE0, ENSELDI);
|
|
aic_outb(aic, SIMODE1, ENSCSIRST);
|
|
aic_outb(aic, SCSISEQ, ENRESELI);
|
|
}
|
|
|
|
/*
|
|
* Start a selection.
|
|
*/
|
|
static void
|
|
aic_select(struct aic_softc *aic)
|
|
{
|
|
struct aic_scb *scb = aic->nexus;
|
|
|
|
CAM_DEBUG(scb->ccb->ccb_h.path, CAM_DEBUG_TRACE,
|
|
("aic_select - ccb %p\n", scb->ccb));
|
|
|
|
aic->state = AIC_SELECTING;
|
|
|
|
aic_outb(aic, DMACNTRL1, 0);
|
|
aic_outb(aic, SCSIID, aic->initiator << OID_S | scb->target);
|
|
aic_outb(aic, SXFRCTL1, STIMO_256ms | ENSTIMER |
|
|
(aic->flags & AIC_PARITY_ENABLE ? ENSPCHK : 0));
|
|
|
|
aic_outb(aic, SIMODE0, ENSELDI|ENSELDO);
|
|
aic_outb(aic, SIMODE1, ENSCSIRST|ENSELTIMO);
|
|
aic_outb(aic, SCSISEQ, ENRESELI|ENSELO|ENAUTOATNO);
|
|
}
|
|
|
|
/*
|
|
* We have successfully selected a target, prepare for the information
|
|
* transfer phases.
|
|
*/
|
|
static void
|
|
aic_selected(struct aic_softc *aic)
|
|
{
|
|
struct aic_scb *scb = aic->nexus;
|
|
union ccb *ccb = scb->ccb;
|
|
struct aic_tinfo *ti = &aic->tinfo[scb->target];
|
|
|
|
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE,
|
|
("aic_selected - ccb %p\n", ccb));
|
|
|
|
aic->state = AIC_HASNEXUS;
|
|
|
|
if (scb->flags & SCB_DEVICE_RESET) {
|
|
aic->msg_buf[0] = MSG_BUS_DEV_RESET;
|
|
aic->msg_len = 1;
|
|
aic->msg_outq = AIC_MSG_MSGBUF;
|
|
} else {
|
|
aic->msg_outq = AIC_MSG_IDENTIFY;
|
|
if ((ti->flags & TINFO_TAG_ENB) != 0 &&
|
|
(ccb->ccb_h.flags & CAM_TAG_ACTION_VALID) != 0)
|
|
aic->msg_outq |= AIC_MSG_TAG_Q;
|
|
else
|
|
ti->lubusy |= 1 << scb->lun;
|
|
if ((ti->flags & TINFO_SDTR_NEGO) != 0)
|
|
aic->msg_outq |= AIC_MSG_SDTR;
|
|
}
|
|
|
|
aic_outb(aic, CLRSINT0, CLRSELDO);
|
|
aic_outb(aic, CLRSINT1, CLRBUSFREE);
|
|
aic_outb(aic, SCSISEQ, ENAUTOATNP);
|
|
aic_outb(aic, SIMODE0, 0);
|
|
aic_outb(aic, SIMODE1, ENSCSIRST|ENBUSFREE|ENREQINIT);
|
|
aic_outb(aic, SCSIRATE, ti->scsirate);
|
|
}
|
|
|
|
/*
|
|
* We are re-selected by a target, save the target id and wait for the
|
|
* target to further identify itself.
|
|
*/
|
|
static void
|
|
aic_reselected(struct aic_softc *aic)
|
|
{
|
|
u_int8_t selid;
|
|
|
|
CAM_DEBUG_PRINT(CAM_DEBUG_TRACE, ("aic_reselected\n"));
|
|
|
|
/*
|
|
* If we have started a selection, it must have lost out in
|
|
* the arbitration, put the command back to the pending queue.
|
|
*/
|
|
if (aic->nexus) {
|
|
TAILQ_INSERT_HEAD(&aic->pending_ccbs,
|
|
&aic->nexus->ccb->ccb_h, sim_links.tqe);
|
|
aic->nexus = NULL;
|
|
}
|
|
|
|
selid = aic_inb(aic, SELID) & ~(1 << aic->initiator);
|
|
if (selid & (selid - 1)) {
|
|
/* this should never have happened */
|
|
printf("aic_reselected: invalid selid %x\n", selid);
|
|
aic_reset(aic, /*initiate_reset*/TRUE);
|
|
return;
|
|
}
|
|
|
|
aic->state = AIC_RESELECTED;
|
|
aic->target = ffs(selid) - 1;
|
|
aic->lun = -1;
|
|
|
|
aic_outb(aic, CLRSINT0, CLRSELDI);
|
|
aic_outb(aic, CLRSINT1, CLRBUSFREE);
|
|
aic_outb(aic, SIMODE0, 0);
|
|
aic_outb(aic, SIMODE1, ENSCSIRST|ENBUSFREE|ENREQINIT);
|
|
aic_outb(aic, SCSISEQ, ENAUTOATNP);
|
|
aic_outb(aic, SCSIRATE, aic->tinfo[aic->target].scsirate);
|
|
}
|
|
|
|
/*
|
|
* Raise ATNO to signal the target that we have a message for it.
|
|
*/
|
|
static __inline void
|
|
aic_sched_msgout(struct aic_softc *aic, u_int8_t msg)
|
|
{
|
|
if (msg) {
|
|
aic->msg_buf[0] = msg;
|
|
aic->msg_len = 1;
|
|
}
|
|
aic->msg_outq |= AIC_MSG_MSGBUF;
|
|
aic_outb(aic, SCSISIGO, aic_inb(aic, SCSISIGI) | ATNO);
|
|
}
|
|
|
|
/*
|
|
* Wait for SPIORDY (SCSI PIO ready) flag, or a phase change.
|
|
*/
|
|
static __inline int
|
|
aic_spiordy(struct aic_softc *aic)
|
|
{
|
|
while (!(aic_inb(aic, DMASTAT) & INTSTAT) &&
|
|
!(aic_inb(aic, SSTAT0) & SPIORDY))
|
|
;
|
|
return !(aic_inb(aic, DMASTAT) & INTSTAT);
|
|
}
|
|
|
|
/*
|
|
* Reestablish a disconnected nexus.
|
|
*/
|
|
static void
|
|
aic_reconnect(struct aic_softc *aic, int tag)
|
|
{
|
|
struct aic_scb *scb;
|
|
struct ccb_hdr *ccb_h;
|
|
|
|
CAM_DEBUG_PRINT(CAM_DEBUG_TRACE, ("aic_reconnect\n"));
|
|
|
|
/* Find the nexus */
|
|
scb = NULL;
|
|
TAILQ_FOREACH(ccb_h, &aic->nexus_ccbs, sim_links.tqe) {
|
|
scb = (struct aic_scb *)ccb_h->ccb_scb_ptr;
|
|
if (scb->target == aic->target && scb->lun == aic->lun &&
|
|
(tag == -1 || scb->tag == tag))
|
|
break;
|
|
}
|
|
|
|
/* ABORT if nothing is found */
|
|
if (!ccb_h) {
|
|
if (tag == -1)
|
|
aic_sched_msgout(aic, MSG_ABORT);
|
|
else
|
|
aic_sched_msgout(aic, MSG_ABORT_TAG);
|
|
xpt_async(AC_UNSOL_RESEL, aic->path, NULL);
|
|
return;
|
|
}
|
|
|
|
/* Reestablish the nexus */
|
|
TAILQ_REMOVE(&aic->nexus_ccbs, ccb_h, sim_links.tqe);
|
|
aic->nexus = scb;
|
|
scb->flags &= ~SCB_DISCONNECTED;
|
|
aic->state = AIC_HASNEXUS;
|
|
}
|
|
|
|
/*
|
|
* Read messages.
|
|
*/
|
|
static void
|
|
aic_msgin(struct aic_softc *aic)
|
|
{
|
|
int msglen;
|
|
|
|
CAM_DEBUG_PRINT(CAM_DEBUG_TRACE, ("aic_msgin\n"));
|
|
|
|
aic_outb(aic, SIMODE1, ENSCSIRST|ENPHASEMIS|ENBUSFREE);
|
|
aic_outb(aic, SXFRCTL0, CHEN|SPIOEN);
|
|
|
|
aic->flags &= ~AIC_DROP_MSGIN;
|
|
aic->msg_len = 0;
|
|
do {
|
|
/*
|
|
* If a parity error is detected, drop the remaining
|
|
* bytes and inform the target so it could resend
|
|
* the messages.
|
|
*/
|
|
if (aic_inb(aic, SSTAT1) & SCSIPERR) {
|
|
aic_outb(aic, CLRSINT1, CLRSCSIPERR);
|
|
aic->flags |= AIC_DROP_MSGIN;
|
|
aic_sched_msgout(aic, MSG_PARITY_ERROR);
|
|
}
|
|
if ((aic->flags & AIC_DROP_MSGIN)) {
|
|
aic_inb(aic, SCSIDAT);
|
|
continue;
|
|
}
|
|
/* read the message byte without ACKing on it */
|
|
aic->msg_buf[aic->msg_len++] = aic_inb(aic, SCSIBUS);
|
|
if (aic->msg_buf[0] == MSG_EXTENDED) {
|
|
if (aic->msg_len < 2) {
|
|
(void) aic_inb(aic, SCSIDAT);
|
|
continue;
|
|
}
|
|
switch (aic->msg_buf[2]) {
|
|
case MSG_EXT_SDTR:
|
|
msglen = MSG_EXT_SDTR_LEN;
|
|
break;
|
|
case MSG_EXT_WDTR:
|
|
msglen = MSG_EXT_WDTR_LEN;
|
|
break;
|
|
default:
|
|
msglen = 0;
|
|
break;
|
|
}
|
|
if (aic->msg_buf[1] != msglen) {
|
|
aic->flags |= AIC_DROP_MSGIN;
|
|
aic_sched_msgout(aic, MSG_MESSAGE_REJECT);
|
|
}
|
|
msglen += 2;
|
|
} else if (aic->msg_buf[0] >= 0x20 && aic->msg_buf[0] <= 0x2f)
|
|
msglen = 2;
|
|
else
|
|
msglen = 1;
|
|
/*
|
|
* If we have a complete message, handle it before the final
|
|
* ACK (in case we decide to reject the message).
|
|
*/
|
|
if (aic->msg_len == msglen) {
|
|
aic_handle_msgin(aic);
|
|
aic->msg_len = 0;
|
|
}
|
|
/* ACK on the message byte */
|
|
(void) aic_inb(aic, SCSIDAT);
|
|
} while (aic_spiordy(aic));
|
|
|
|
aic_outb(aic, SXFRCTL0, CHEN);
|
|
aic_outb(aic, SIMODE1, ENSCSIRST|ENBUSFREE|ENREQINIT);
|
|
}
|
|
|
|
/*
|
|
* Handle a message.
|
|
*/
|
|
static void
|
|
aic_handle_msgin(struct aic_softc *aic)
|
|
{
|
|
struct aic_scb *scb;
|
|
struct ccb_hdr *ccb_h;
|
|
struct aic_tinfo *ti;
|
|
struct ccb_trans_settings neg;
|
|
struct ccb_trans_settings_spi *spi = &neg.xport_specific.spi;
|
|
|
|
if (aic->state == AIC_RESELECTED) {
|
|
if (!MSG_ISIDENTIFY(aic->msg_buf[0])) {
|
|
aic_sched_msgout(aic, MSG_MESSAGE_REJECT);
|
|
return;
|
|
}
|
|
aic->lun = aic->msg_buf[0] & MSG_IDENTIFY_LUNMASK;
|
|
if (aic->tinfo[aic->target].lubusy & (1 << aic->lun))
|
|
aic_reconnect(aic, -1);
|
|
else
|
|
aic->state = AIC_RECONNECTING;
|
|
return;
|
|
}
|
|
|
|
if (aic->state == AIC_RECONNECTING) {
|
|
if (aic->msg_buf[0] != MSG_SIMPLE_Q_TAG) {
|
|
aic_sched_msgout(aic, MSG_MESSAGE_REJECT);
|
|
return;
|
|
}
|
|
aic_reconnect(aic, aic->msg_buf[1]);
|
|
return;
|
|
}
|
|
|
|
switch (aic->msg_buf[0]) {
|
|
case MSG_CMDCOMPLETE: {
|
|
struct ccb_scsiio *csio;
|
|
scb = aic->nexus;
|
|
ccb_h = &scb->ccb->ccb_h;
|
|
csio = &scb->ccb->csio;
|
|
if ((scb->flags & SCB_SENSE) != 0) {
|
|
/* auto REQUEST SENSE command */
|
|
scb->flags &= ~SCB_SENSE;
|
|
csio->sense_resid = scb->data_len;
|
|
if (scb->status == SCSI_STATUS_OK) {
|
|
ccb_h->status |=
|
|
CAM_SCSI_STATUS_ERROR|CAM_AUTOSNS_VALID;
|
|
/*scsi_sense_print(csio);*/
|
|
} else {
|
|
ccb_h->status |= CAM_AUTOSENSE_FAIL;
|
|
printf("ccb %p sense failed %x\n",
|
|
ccb_h, scb->status);
|
|
}
|
|
} else {
|
|
csio->scsi_status = scb->status;
|
|
csio->resid = scb->data_len;
|
|
if (scb->status == SCSI_STATUS_OK) {
|
|
/* everything goes well */
|
|
ccb_h->status |= CAM_REQ_CMP;
|
|
} else if ((ccb_h->flags & CAM_DIS_AUTOSENSE) == 0 &&
|
|
(csio->scsi_status == SCSI_STATUS_CHECK_COND ||
|
|
csio->scsi_status == SCSI_STATUS_CMD_TERMINATED)) {
|
|
/* try to retrieve sense information */
|
|
scb->flags |= SCB_SENSE;
|
|
aic->flags |= AIC_BUSFREE_OK;
|
|
return;
|
|
} else
|
|
ccb_h->status |= CAM_SCSI_STATUS_ERROR;
|
|
}
|
|
aic_done(aic, scb);
|
|
aic->flags |= AIC_BUSFREE_OK;
|
|
break;
|
|
}
|
|
case MSG_EXTENDED:
|
|
switch (aic->msg_buf[2]) {
|
|
case MSG_EXT_SDTR:
|
|
scb = aic->nexus;
|
|
ti = &aic->tinfo[scb->target];
|
|
if (ti->flags & TINFO_SDTR_SENT) {
|
|
ti->current.period = aic->msg_buf[3];
|
|
ti->current.offset = aic->msg_buf[4];
|
|
} else {
|
|
ti->current.period = aic->msg_buf[3] =
|
|
max(ti->goal.period, aic->msg_buf[3]);
|
|
ti->current.offset = aic->msg_buf[4] =
|
|
min(ti->goal.offset, aic->msg_buf[4]);
|
|
/*
|
|
* The target initiated the negotiation,
|
|
* send back a response.
|
|
*/
|
|
aic_sched_msgout(aic, 0);
|
|
}
|
|
ti->flags &= ~(TINFO_SDTR_SENT|TINFO_SDTR_NEGO);
|
|
ti->scsirate = ti->current.offset ? ti->current.offset |
|
|
((ti->current.period * 4 + 49) / 50 - 2) << 4 : 0;
|
|
aic_outb(aic, SCSIRATE, ti->scsirate);
|
|
memset(&neg, 0, sizeof (neg));
|
|
neg.protocol = PROTO_SCSI;
|
|
neg.protocol_version = SCSI_REV_2;
|
|
neg.transport = XPORT_SPI;
|
|
neg.transport_version = 2;
|
|
spi->sync_period = ti->goal.period = ti->current.period;
|
|
spi->sync_offset = ti->goal.offset = ti->current.offset;
|
|
spi->valid = CTS_SPI_VALID_SYNC_RATE
|
|
| CTS_SPI_VALID_SYNC_OFFSET;
|
|
ccb_h = &scb->ccb->ccb_h;
|
|
xpt_setup_ccb(&neg.ccb_h, ccb_h->path, 1);
|
|
xpt_async(AC_TRANSFER_NEG, ccb_h->path, &neg);
|
|
break;
|
|
case MSG_EXT_WDTR:
|
|
default:
|
|
aic_sched_msgout(aic, MSG_MESSAGE_REJECT);
|
|
break;
|
|
}
|
|
break;
|
|
case MSG_DISCONNECT:
|
|
scb = aic->nexus;
|
|
ccb_h = &scb->ccb->ccb_h;
|
|
TAILQ_INSERT_TAIL(&aic->nexus_ccbs, ccb_h, sim_links.tqe);
|
|
scb->flags |= SCB_DISCONNECTED;
|
|
aic->flags |= AIC_BUSFREE_OK;
|
|
aic->nexus = NULL;
|
|
CAM_DEBUG(ccb_h->path, CAM_DEBUG_TRACE, ("disconnected\n"));
|
|
break;
|
|
case MSG_MESSAGE_REJECT:
|
|
switch (aic->msg_outq & -aic->msg_outq) {
|
|
case AIC_MSG_TAG_Q:
|
|
scb = aic->nexus;
|
|
ti = &aic->tinfo[scb->target];
|
|
ti->flags &= ~TINFO_TAG_ENB;
|
|
ti->lubusy |= 1 << scb->lun;
|
|
break;
|
|
case AIC_MSG_SDTR:
|
|
scb = aic->nexus;
|
|
ti = &aic->tinfo[scb->target];
|
|
ti->current.period = ti->goal.period = 0;
|
|
ti->current.offset = ti->goal.offset = 0;
|
|
ti->flags &= ~(TINFO_SDTR_SENT|TINFO_SDTR_NEGO);
|
|
ti->scsirate = 0;
|
|
aic_outb(aic, SCSIRATE, ti->scsirate);
|
|
memset(&neg, 0, sizeof (neg));
|
|
neg.protocol = PROTO_SCSI;
|
|
neg.protocol_version = SCSI_REV_2;
|
|
neg.transport = XPORT_SPI;
|
|
neg.transport_version = 2;
|
|
spi->sync_period = ti->current.period;
|
|
spi->sync_offset = ti->current.offset;
|
|
spi->valid = CTS_SPI_VALID_SYNC_RATE
|
|
| CTS_SPI_VALID_SYNC_OFFSET;
|
|
ccb_h = &scb->ccb->ccb_h;
|
|
xpt_setup_ccb(&neg.ccb_h, ccb_h->path, 1);
|
|
xpt_async(AC_TRANSFER_NEG, ccb_h->path, &neg);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
break;
|
|
case MSG_SAVEDATAPOINTER:
|
|
break;
|
|
case MSG_RESTOREPOINTERS:
|
|
break;
|
|
case MSG_NOOP:
|
|
break;
|
|
default:
|
|
aic_sched_msgout(aic, MSG_MESSAGE_REJECT);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Send messages.
|
|
*/
|
|
static void
|
|
aic_msgout(struct aic_softc *aic)
|
|
{
|
|
struct aic_scb *scb;
|
|
union ccb *ccb;
|
|
struct aic_tinfo *ti;
|
|
int msgidx = 0;
|
|
|
|
CAM_DEBUG_PRINT(CAM_DEBUG_TRACE, ("aic_msgout\n"));
|
|
|
|
aic_outb(aic, SIMODE1, ENSCSIRST|ENPHASEMIS|ENBUSFREE);
|
|
aic_outb(aic, SXFRCTL0, CHEN|SPIOEN);
|
|
|
|
/*
|
|
* If the previous phase is also the message out phase,
|
|
* we need to retransmit all the messages, probably
|
|
* because the target has detected a parity error during
|
|
* the past transmission.
|
|
*/
|
|
if (aic->prev_phase == PH_MSGOUT)
|
|
aic->msg_outq = aic->msg_sent;
|
|
|
|
do {
|
|
int q = aic->msg_outq;
|
|
if (msgidx > 0 && msgidx == aic->msg_len) {
|
|
/* complete message sent, start the next one */
|
|
q &= -q;
|
|
aic->msg_sent |= q;
|
|
aic->msg_outq ^= q;
|
|
q = aic->msg_outq;
|
|
msgidx = 0;
|
|
}
|
|
if (msgidx == 0) {
|
|
/* setup the message */
|
|
switch (q & -q) {
|
|
case AIC_MSG_IDENTIFY:
|
|
scb = aic->nexus;
|
|
ccb = scb->ccb;
|
|
ti = &aic->tinfo[scb->target];
|
|
aic->msg_buf[0] = MSG_IDENTIFY(scb->lun,
|
|
(ti->flags & TINFO_DISC_ENB) &&
|
|
!(ccb->ccb_h.flags & CAM_DIS_DISCONNECT));
|
|
aic->msg_len = 1;
|
|
break;
|
|
case AIC_MSG_TAG_Q:
|
|
scb = aic->nexus;
|
|
ccb = scb->ccb;
|
|
aic->msg_buf[0] = ccb->csio.tag_action;
|
|
aic->msg_buf[1] = scb->tag;
|
|
aic->msg_len = 2;
|
|
break;
|
|
case AIC_MSG_SDTR:
|
|
scb = aic->nexus;
|
|
ti = &aic->tinfo[scb->target];
|
|
aic->msg_buf[0] = MSG_EXTENDED;
|
|
aic->msg_buf[1] = MSG_EXT_SDTR_LEN;
|
|
aic->msg_buf[2] = MSG_EXT_SDTR;
|
|
aic->msg_buf[3] = ti->goal.period;
|
|
aic->msg_buf[4] = ti->goal.offset;
|
|
aic->msg_len = MSG_EXT_SDTR_LEN + 2;
|
|
ti->flags |= TINFO_SDTR_SENT;
|
|
break;
|
|
case AIC_MSG_MSGBUF:
|
|
/* a single message already in the buffer */
|
|
if (aic->msg_buf[0] == MSG_BUS_DEV_RESET ||
|
|
aic->msg_buf[0] == MSG_ABORT ||
|
|
aic->msg_buf[0] == MSG_ABORT_TAG)
|
|
aic->flags |= AIC_BUSFREE_OK;
|
|
break;
|
|
}
|
|
}
|
|
/*
|
|
* If this is the last message byte of all messages,
|
|
* clear ATNO to signal transmission complete.
|
|
*/
|
|
if ((q & (q - 1)) == 0 && msgidx == aic->msg_len - 1)
|
|
aic_outb(aic, CLRSINT1, CLRATNO);
|
|
/* transmit the message byte */
|
|
aic_outb(aic, SCSIDAT, aic->msg_buf[msgidx++]);
|
|
} while (aic_spiordy(aic));
|
|
|
|
aic_outb(aic, SXFRCTL0, CHEN);
|
|
aic_outb(aic, SIMODE1, ENSCSIRST|ENBUSFREE|ENREQINIT);
|
|
}
|
|
|
|
/*
|
|
* Read data bytes.
|
|
*/
|
|
static void
|
|
aic_datain(struct aic_softc *aic)
|
|
{
|
|
struct aic_scb *scb = aic->nexus;
|
|
u_int8_t dmastat, dmacntrl0;
|
|
int n;
|
|
|
|
CAM_DEBUG_PRINT(CAM_DEBUG_TRACE, ("aic_datain\n"));
|
|
|
|
aic_outb(aic, SIMODE1, ENSCSIRST|ENPHASEMIS|ENBUSFREE);
|
|
aic_outb(aic, SXFRCTL0, SCSIEN|DMAEN|CHEN);
|
|
|
|
dmacntrl0 = ENDMA;
|
|
if (aic->flags & AIC_DWIO_ENABLE)
|
|
dmacntrl0 |= DWORDPIO;
|
|
aic_outb(aic, DMACNTRL0, dmacntrl0);
|
|
|
|
while (scb->data_len > 0) {
|
|
for (;;) {
|
|
/* wait for the fifo to fill up or a phase change */
|
|
dmastat = aic_inb(aic, DMASTAT);
|
|
if (dmastat & (INTSTAT|DFIFOFULL))
|
|
break;
|
|
}
|
|
if (dmastat & DFIFOFULL) {
|
|
n = FIFOSIZE;
|
|
} else {
|
|
/*
|
|
* No more data, wait for the remaining bytes in
|
|
* the scsi fifo to be transfer to the host fifo.
|
|
*/
|
|
while (!(aic_inb(aic, SSTAT2) & SEMPTY))
|
|
;
|
|
n = aic_inb(aic, FIFOSTAT);
|
|
}
|
|
n = imin(scb->data_len, n);
|
|
if (aic->flags & AIC_DWIO_ENABLE) {
|
|
if (n >= 12) {
|
|
aic_insl(aic, DMADATALONG, scb->data_ptr, n>>2);
|
|
scb->data_ptr += n & ~3;
|
|
scb->data_len -= n & ~3;
|
|
n &= 3;
|
|
}
|
|
} else {
|
|
if (n >= 8) {
|
|
aic_insw(aic, DMADATA, scb->data_ptr, n >> 1);
|
|
scb->data_ptr += n & ~1;
|
|
scb->data_len -= n & ~1;
|
|
n &= 1;
|
|
}
|
|
}
|
|
if (n) {
|
|
aic_outb(aic, DMACNTRL0, ENDMA|B8MODE);
|
|
aic_insb(aic, DMADATA, scb->data_ptr, n);
|
|
scb->data_ptr += n;
|
|
scb->data_len -= n;
|
|
aic_outb(aic, DMACNTRL0, dmacntrl0);
|
|
}
|
|
|
|
if (dmastat & INTSTAT)
|
|
break;
|
|
}
|
|
|
|
aic_outb(aic, SXFRCTL0, CHEN);
|
|
aic_outb(aic, SIMODE1, ENSCSIRST|ENBUSFREE|ENREQINIT);
|
|
}
|
|
|
|
/*
|
|
* Send data bytes.
|
|
*/
|
|
static void
|
|
aic_dataout(struct aic_softc *aic)
|
|
{
|
|
struct aic_scb *scb = aic->nexus;
|
|
u_int8_t dmastat, dmacntrl0, sstat2;
|
|
int n;
|
|
|
|
CAM_DEBUG_PRINT(CAM_DEBUG_TRACE, ("aic_dataout\n"));
|
|
|
|
aic_outb(aic, SIMODE1, ENSCSIRST|ENPHASEMIS|ENBUSFREE);
|
|
aic_outb(aic, SXFRCTL0, SCSIEN|DMAEN|CHEN);
|
|
|
|
dmacntrl0 = ENDMA|WRITE;
|
|
if (aic->flags & AIC_DWIO_ENABLE)
|
|
dmacntrl0 |= DWORDPIO;
|
|
aic_outb(aic, DMACNTRL0, dmacntrl0);
|
|
|
|
while (scb->data_len > 0) {
|
|
for (;;) {
|
|
/* wait for the fifo to clear up or a phase change */
|
|
dmastat = aic_inb(aic, DMASTAT);
|
|
if (dmastat & (INTSTAT|DFIFOEMP))
|
|
break;
|
|
}
|
|
if (dmastat & INTSTAT)
|
|
break;
|
|
n = imin(scb->data_len, FIFOSIZE);
|
|
if (aic->flags & AIC_DWIO_ENABLE) {
|
|
if (n >= 12) {
|
|
aic_outsl(aic, DMADATALONG, scb->data_ptr,n>>2);
|
|
scb->data_ptr += n & ~3;
|
|
scb->data_len -= n & ~3;
|
|
n &= 3;
|
|
}
|
|
} else {
|
|
if (n >= 8) {
|
|
aic_outsw(aic, DMADATA, scb->data_ptr, n >> 1);
|
|
scb->data_ptr += n & ~1;
|
|
scb->data_len -= n & ~1;
|
|
n &= 1;
|
|
}
|
|
}
|
|
if (n) {
|
|
aic_outb(aic, DMACNTRL0, ENDMA|WRITE|B8MODE);
|
|
aic_outsb(aic, DMADATA, scb->data_ptr, n);
|
|
scb->data_ptr += n;
|
|
scb->data_len -= n;
|
|
aic_outb(aic, DMACNTRL0, dmacntrl0);
|
|
}
|
|
}
|
|
|
|
for (;;) {
|
|
/* wait until all bytes in the fifos are transmitted */
|
|
dmastat = aic_inb(aic, DMASTAT);
|
|
sstat2 = aic_inb(aic, SSTAT2);
|
|
if ((dmastat & DFIFOEMP) && (sstat2 & SEMPTY))
|
|
break;
|
|
if (dmastat & INTSTAT) {
|
|
/* adjust for untransmitted bytes */
|
|
n = aic_inb(aic, FIFOSTAT) + (sstat2 & 0xf);
|
|
scb->data_ptr -= n;
|
|
scb->data_len += n;
|
|
/* clear the fifo */
|
|
aic_outb(aic, SXFRCTL0, CHEN|CLRCH);
|
|
aic_outb(aic, DMACNTRL0, RSTFIFO);
|
|
break;
|
|
}
|
|
}
|
|
|
|
aic_outb(aic, SXFRCTL0, CHEN);
|
|
aic_outb(aic, SIMODE1, ENSCSIRST|ENBUSFREE|ENREQINIT);
|
|
}
|
|
|
|
/*
|
|
* Send the scsi command.
|
|
*/
|
|
static void
|
|
aic_cmd(struct aic_softc *aic)
|
|
{
|
|
struct aic_scb *scb = aic->nexus;
|
|
struct scsi_request_sense sense_cmd;
|
|
|
|
CAM_DEBUG_PRINT(CAM_DEBUG_TRACE, ("aic_cmd\n"));
|
|
|
|
if (scb->flags & SCB_SENSE) {
|
|
/* autosense request */
|
|
sense_cmd.opcode = REQUEST_SENSE;
|
|
sense_cmd.byte2 = scb->lun << 5;
|
|
sense_cmd.length = scb->ccb->csio.sense_len;
|
|
sense_cmd.control = 0;
|
|
sense_cmd.unused[0] = 0;
|
|
sense_cmd.unused[1] = 0;
|
|
scb->cmd_ptr = (u_int8_t *)&sense_cmd;
|
|
scb->cmd_len = sizeof(sense_cmd);
|
|
scb->data_ptr = (u_int8_t *)&scb->ccb->csio.sense_data;
|
|
scb->data_len = scb->ccb->csio.sense_len;
|
|
}
|
|
|
|
aic_outb(aic, SIMODE1, ENSCSIRST|ENPHASEMIS|ENBUSFREE);
|
|
aic_outb(aic, DMACNTRL0, ENDMA|WRITE);
|
|
aic_outb(aic, SXFRCTL0, SCSIEN|DMAEN|CHEN);
|
|
aic_outsw(aic, DMADATA, (u_int16_t *)scb->cmd_ptr, scb->cmd_len >> 1);
|
|
while ((aic_inb(aic, SSTAT2) & SEMPTY) == 0 &&
|
|
(aic_inb(aic, DMASTAT) & INTSTAT) == 0)
|
|
;
|
|
aic_outb(aic, SXFRCTL0, CHEN);
|
|
aic_outb(aic, SIMODE1, ENSCSIRST|ENBUSFREE|ENREQINIT);
|
|
}
|
|
|
|
/*
|
|
* Finish off a command. The caller is responsible to remove the ccb
|
|
* from any queue.
|
|
*/
|
|
static void
|
|
aic_done(struct aic_softc *aic, struct aic_scb *scb)
|
|
{
|
|
union ccb *ccb = scb->ccb;
|
|
|
|
CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE,
|
|
("aic_done - ccb %p status %x resid %d\n",
|
|
ccb, ccb->ccb_h.status, ccb->csio.resid));
|
|
|
|
callout_stop(&scb->timer);
|
|
|
|
if ((scb->flags & SCB_DEVICE_RESET) != 0 &&
|
|
ccb->ccb_h.func_code != XPT_RESET_DEV) {
|
|
struct cam_path *path;
|
|
struct ccb_hdr *ccb_h;
|
|
cam_status error;
|
|
|
|
error = xpt_create_path(&path, /*periph*/NULL,
|
|
cam_sim_path(aic->sim),
|
|
scb->target,
|
|
CAM_LUN_WILDCARD);
|
|
|
|
if (error == CAM_REQ_CMP) {
|
|
xpt_async(AC_SENT_BDR, path, NULL);
|
|
xpt_free_path(path);
|
|
}
|
|
|
|
ccb_h = TAILQ_FIRST(&aic->pending_ccbs);
|
|
while (ccb_h != NULL) {
|
|
struct aic_scb *pending_scb;
|
|
|
|
pending_scb = (struct aic_scb *)ccb_h->ccb_scb_ptr;
|
|
if (ccb_h->target_id == scb->target) {
|
|
ccb_h->status |= CAM_BDR_SENT;
|
|
ccb_h = TAILQ_NEXT(ccb_h, sim_links.tqe);
|
|
TAILQ_REMOVE(&aic->pending_ccbs,
|
|
&pending_scb->ccb->ccb_h, sim_links.tqe);
|
|
aic_done(aic, pending_scb);
|
|
} else {
|
|
callout_reset(&pending_scb->timer,
|
|
(ccb_h->timeout * hz) / 1000, aic_timeout,
|
|
pending_scb);
|
|
ccb_h = TAILQ_NEXT(ccb_h, sim_links.tqe);
|
|
}
|
|
}
|
|
|
|
ccb_h = TAILQ_FIRST(&aic->nexus_ccbs);
|
|
while (ccb_h != NULL) {
|
|
struct aic_scb *nexus_scb;
|
|
|
|
nexus_scb = (struct aic_scb *)ccb_h->ccb_scb_ptr;
|
|
if (ccb_h->target_id == scb->target) {
|
|
ccb_h->status |= CAM_BDR_SENT;
|
|
ccb_h = TAILQ_NEXT(ccb_h, sim_links.tqe);
|
|
TAILQ_REMOVE(&aic->nexus_ccbs,
|
|
&nexus_scb->ccb->ccb_h, sim_links.tqe);
|
|
aic_done(aic, nexus_scb);
|
|
} else {
|
|
callout_reset(&nexus_scb->timer,
|
|
(ccb_h->timeout * hz) / 1000, aic_timeout,
|
|
nexus_scb);
|
|
ccb_h = TAILQ_NEXT(ccb_h, sim_links.tqe);
|
|
}
|
|
}
|
|
}
|
|
|
|
if (aic->nexus == scb || scb->flags & SCB_DISCONNECTED)
|
|
aic->tinfo[scb->target].lubusy &= ~(1 << scb->lun);
|
|
|
|
if (aic->nexus == scb) {
|
|
aic->nexus = NULL;
|
|
}
|
|
aic_free_scb(aic, scb);
|
|
xpt_done(ccb);
|
|
}
|
|
|
|
static void
|
|
aic_poll(struct cam_sim *sim)
|
|
{
|
|
aic_intr_locked(cam_sim_softc(sim));
|
|
}
|
|
|
|
static void
|
|
aic_timeout(void *arg)
|
|
{
|
|
struct aic_scb *scb = (struct aic_scb *)arg;
|
|
union ccb *ccb = scb->ccb;
|
|
struct aic_softc *aic = (struct aic_softc *)ccb->ccb_h.ccb_aic_ptr;
|
|
|
|
mtx_assert(&aic->lock, MA_OWNED);
|
|
xpt_print_path(ccb->ccb_h.path);
|
|
printf("ccb %p - timed out", ccb);
|
|
if (aic->nexus && aic->nexus != scb)
|
|
printf(", nexus %p", aic->nexus->ccb);
|
|
printf(", phase 0x%x, state %d\n", aic_inb(aic, SCSISIGI), aic->state);
|
|
|
|
if ((scb->flags & SCB_ACTIVE) == 0) {
|
|
xpt_print_path(ccb->ccb_h.path);
|
|
printf("ccb %p - timed out already completed\n", ccb);
|
|
return;
|
|
}
|
|
|
|
if ((scb->flags & SCB_DEVICE_RESET) == 0 && aic->nexus == scb) {
|
|
struct ccb_hdr *ccb_h = &scb->ccb->ccb_h;
|
|
struct aic_scb *pending_scb;
|
|
|
|
if ((ccb_h->status & CAM_RELEASE_SIMQ) == 0) {
|
|
xpt_freeze_simq(aic->sim, /*count*/1);
|
|
ccb_h->status |= CAM_RELEASE_SIMQ;
|
|
}
|
|
|
|
TAILQ_FOREACH(ccb_h, &aic->pending_ccbs, sim_links.tqe) {
|
|
pending_scb = ccb_h->ccb_scb_ptr;
|
|
callout_stop(&pending_scb->timer);
|
|
}
|
|
|
|
TAILQ_FOREACH(ccb_h, &aic->nexus_ccbs, sim_links.tqe) {
|
|
pending_scb = ccb_h->ccb_scb_ptr;
|
|
callout_stop(&pending_scb->timer);
|
|
}
|
|
|
|
scb->flags |= SCB_DEVICE_RESET;
|
|
callout_reset(&scb->timer, 5 * hz, aic_timeout, scb);
|
|
aic_sched_msgout(aic, MSG_BUS_DEV_RESET);
|
|
} else {
|
|
if (aic->nexus == scb) {
|
|
ccb->ccb_h.status |= CAM_CMD_TIMEOUT;
|
|
aic_done(aic, scb);
|
|
}
|
|
aic_reset(aic, /*initiate_reset*/TRUE);
|
|
}
|
|
}
|
|
|
|
void
|
|
aic_intr(void *arg)
|
|
{
|
|
struct aic_softc *aic = (struct aic_softc *)arg;
|
|
|
|
mtx_lock(&aic->lock);
|
|
aic_intr_locked(aic);
|
|
mtx_unlock(&aic->lock);
|
|
}
|
|
|
|
void
|
|
aic_intr_locked(struct aic_softc *aic)
|
|
{
|
|
u_int8_t sstat0, sstat1;
|
|
union ccb *ccb;
|
|
struct aic_scb *scb;
|
|
|
|
if (!(aic_inb(aic, DMASTAT) & INTSTAT))
|
|
return;
|
|
|
|
aic_outb(aic, DMACNTRL0, 0);
|
|
|
|
sstat0 = aic_inb(aic, SSTAT0);
|
|
sstat1 = aic_inb(aic, SSTAT1);
|
|
|
|
if ((sstat1 & SCSIRSTI) != 0) {
|
|
/* a device-initiated bus reset */
|
|
aic_outb(aic, CLRSINT1, CLRSCSIRSTI);
|
|
aic_reset(aic, /*initiate_reset*/FALSE);
|
|
return;
|
|
}
|
|
|
|
if ((sstat1 & SCSIPERR) != 0) {
|
|
aic_outb(aic, CLRSINT1, CLRSCSIPERR);
|
|
aic_sched_msgout(aic, MSG_PARITY_ERROR);
|
|
aic_outb(aic, DMACNTRL0, INTEN);
|
|
return;
|
|
}
|
|
|
|
if (aic_inb(aic, SSTAT4)) {
|
|
aic_outb(aic, CLRSERR, CLRSYNCERR|CLRFWERR|CLRFRERR);
|
|
aic_reset(aic, /*initiate_reset*/TRUE);
|
|
return;
|
|
}
|
|
|
|
if (aic->state <= AIC_SELECTING) {
|
|
if ((sstat0 & SELDI) != 0) {
|
|
aic_reselected(aic);
|
|
aic_outb(aic, DMACNTRL0, INTEN);
|
|
return;
|
|
}
|
|
|
|
if ((sstat0 & SELDO) != 0) {
|
|
aic_selected(aic);
|
|
aic_outb(aic, DMACNTRL0, INTEN);
|
|
return;
|
|
}
|
|
|
|
if ((sstat1 & SELTO) != 0) {
|
|
scb = aic->nexus;
|
|
ccb = scb->ccb;
|
|
ccb->ccb_h.status = CAM_SEL_TIMEOUT;
|
|
aic_done(aic, scb);
|
|
while ((sstat1 & BUSFREE) == 0)
|
|
sstat1 = aic_inb(aic, SSTAT1);
|
|
aic->flags |= AIC_BUSFREE_OK;
|
|
}
|
|
}
|
|
|
|
if ((sstat1 & BUSFREE) != 0) {
|
|
aic_outb(aic, SCSISEQ, 0);
|
|
aic_outb(aic, CLRSINT0, sstat0);
|
|
aic_outb(aic, CLRSINT1, sstat1);
|
|
if ((scb = aic->nexus)) {
|
|
if ((aic->flags & AIC_BUSFREE_OK) == 0) {
|
|
ccb = scb->ccb;
|
|
ccb->ccb_h.status = CAM_UNEXP_BUSFREE;
|
|
aic_done(aic, scb);
|
|
} else if (scb->flags & SCB_DEVICE_RESET) {
|
|
ccb = scb->ccb;
|
|
if (ccb->ccb_h.func_code == XPT_RESET_DEV) {
|
|
xpt_async(AC_SENT_BDR,
|
|
ccb->ccb_h.path, NULL);
|
|
ccb->ccb_h.status |= CAM_REQ_CMP;
|
|
} else
|
|
ccb->ccb_h.status |= CAM_CMD_TIMEOUT;
|
|
aic_done(aic, scb);
|
|
} else if (scb->flags & SCB_SENSE) {
|
|
/* autosense request */
|
|
aic->flags &= ~AIC_BUSFREE_OK;
|
|
aic->tinfo[scb->target].lubusy &=
|
|
~(1 << scb->lun);
|
|
aic_select(aic);
|
|
aic_outb(aic, DMACNTRL0, INTEN);
|
|
return;
|
|
}
|
|
}
|
|
aic->flags &= ~AIC_BUSFREE_OK;
|
|
aic->state = AIC_IDLE;
|
|
aic_start(aic);
|
|
aic_outb(aic, DMACNTRL0, INTEN);
|
|
return;
|
|
}
|
|
|
|
if ((sstat1 & REQINIT) != 0) {
|
|
u_int8_t phase = aic_inb(aic, SCSISIGI) & PH_MASK;
|
|
aic_outb(aic, SCSISIGO, phase);
|
|
aic_outb(aic, CLRSINT1, CLRPHASECHG);
|
|
|
|
switch (phase) {
|
|
case PH_MSGOUT:
|
|
aic_msgout(aic);
|
|
break;
|
|
case PH_MSGIN:
|
|
aic_msgin(aic);
|
|
break;
|
|
case PH_STAT:
|
|
scb = aic->nexus;
|
|
ccb = scb->ccb;
|
|
aic_outb(aic, DMACNTRL0, 0);
|
|
aic_outb(aic, SXFRCTL0, CHEN|SPIOEN);
|
|
scb->status = aic_inb(aic, SCSIDAT);
|
|
aic_outb(aic, SXFRCTL0, CHEN);
|
|
break;
|
|
case PH_CMD:
|
|
aic_cmd(aic);
|
|
break;
|
|
case PH_DATAIN:
|
|
aic_datain(aic);
|
|
break;
|
|
case PH_DATAOUT:
|
|
aic_dataout(aic);
|
|
break;
|
|
}
|
|
aic->prev_phase = phase;
|
|
aic_outb(aic, DMACNTRL0, INTEN);
|
|
return;
|
|
}
|
|
|
|
printf("aic_intr: unexpected intr sstat0 %x sstat1 %x\n",
|
|
sstat0, sstat1);
|
|
aic_outb(aic, DMACNTRL0, INTEN);
|
|
}
|
|
|
|
/*
|
|
* Reset ourselves.
|
|
*/
|
|
static void
|
|
aic_chip_reset(struct aic_softc *aic)
|
|
{
|
|
/*
|
|
* Doc. recommends to clear these two registers before
|
|
* operations commence
|
|
*/
|
|
aic_outb(aic, SCSITEST, 0);
|
|
aic_outb(aic, TEST, 0);
|
|
|
|
/* Reset SCSI-FIFO and abort any transfers */
|
|
aic_outb(aic, SXFRCTL0, CHEN|CLRCH|CLRSTCNT);
|
|
|
|
/* Reset HOST-FIFO */
|
|
aic_outb(aic, DMACNTRL0, RSTFIFO);
|
|
aic_outb(aic, DMACNTRL1, 0);
|
|
|
|
/* Disable all selection features */
|
|
aic_outb(aic, SCSISEQ, 0);
|
|
aic_outb(aic, SXFRCTL1, 0);
|
|
|
|
/* Disable interrupts */
|
|
aic_outb(aic, SIMODE0, 0);
|
|
aic_outb(aic, SIMODE1, 0);
|
|
|
|
/* Clear interrupts */
|
|
aic_outb(aic, CLRSINT0, 0x7f);
|
|
aic_outb(aic, CLRSINT1, 0xef);
|
|
|
|
/* Disable synchronous transfers */
|
|
aic_outb(aic, SCSIRATE, 0);
|
|
|
|
/* Haven't seen ant errors (yet) */
|
|
aic_outb(aic, CLRSERR, 0x07);
|
|
|
|
/* Set our SCSI-ID */
|
|
aic_outb(aic, SCSIID, aic->initiator << OID_S);
|
|
aic_outb(aic, BRSTCNTRL, EISA_BRST_TIM);
|
|
}
|
|
|
|
/*
|
|
* Reset the SCSI bus
|
|
*/
|
|
static void
|
|
aic_scsi_reset(struct aic_softc *aic)
|
|
{
|
|
aic_outb(aic, SCSISEQ, SCSIRSTO);
|
|
DELAY(500);
|
|
aic_outb(aic, SCSISEQ, 0);
|
|
DELAY(50);
|
|
}
|
|
|
|
/*
|
|
* Reset. Abort all pending commands.
|
|
*/
|
|
static void
|
|
aic_reset(struct aic_softc *aic, int initiate_reset)
|
|
{
|
|
struct ccb_hdr *ccb_h;
|
|
|
|
CAM_DEBUG_PRINT(CAM_DEBUG_TRACE, ("aic_reset\n"));
|
|
|
|
if (initiate_reset)
|
|
aic_scsi_reset(aic);
|
|
aic_chip_reset(aic);
|
|
|
|
xpt_async(AC_BUS_RESET, aic->path, NULL);
|
|
|
|
while ((ccb_h = TAILQ_FIRST(&aic->pending_ccbs)) != NULL) {
|
|
TAILQ_REMOVE(&aic->pending_ccbs, ccb_h, sim_links.tqe);
|
|
ccb_h->status |= CAM_SCSI_BUS_RESET;
|
|
aic_done(aic, (struct aic_scb *)ccb_h->ccb_scb_ptr);
|
|
}
|
|
|
|
while ((ccb_h = TAILQ_FIRST(&aic->nexus_ccbs)) != NULL) {
|
|
TAILQ_REMOVE(&aic->nexus_ccbs, ccb_h, sim_links.tqe);
|
|
ccb_h->status |= CAM_SCSI_BUS_RESET;
|
|
aic_done(aic, (struct aic_scb *)ccb_h->ccb_scb_ptr);
|
|
}
|
|
|
|
if (aic->nexus) {
|
|
ccb_h = &aic->nexus->ccb->ccb_h;
|
|
ccb_h->status |= CAM_SCSI_BUS_RESET;
|
|
aic_done(aic, aic->nexus);
|
|
}
|
|
|
|
aic->state = AIC_IDLE;
|
|
aic_outb(aic, DMACNTRL0, INTEN);
|
|
}
|
|
|
|
static char *aic_chip_names[] = {
|
|
"AIC6260", "AIC6360", "AIC6370", "GM82C700",
|
|
};
|
|
|
|
static struct {
|
|
int type;
|
|
char *idstring;
|
|
} aic_chip_ids[] = {
|
|
{ AIC6360, IDSTRING_AIC6360 },
|
|
{ AIC6370, IDSTRING_AIC6370 },
|
|
{ GM82C700, IDSTRING_GM82C700 },
|
|
};
|
|
|
|
static void
|
|
aic_init(struct aic_softc *aic)
|
|
{
|
|
struct aic_scb *scb;
|
|
struct aic_tinfo *ti;
|
|
u_int8_t porta, portb;
|
|
char chip_id[33];
|
|
int i;
|
|
|
|
TAILQ_INIT(&aic->pending_ccbs);
|
|
TAILQ_INIT(&aic->nexus_ccbs);
|
|
SLIST_INIT(&aic->free_scbs);
|
|
aic->nexus = NULL;
|
|
aic->state = AIC_IDLE;
|
|
aic->prev_phase = -1;
|
|
aic->flags = 0;
|
|
|
|
aic_chip_reset(aic);
|
|
aic_scsi_reset(aic);
|
|
|
|
/* determine the chip type from its ID string */
|
|
aic->chip_type = AIC6260;
|
|
aic_insb(aic, ID, chip_id, sizeof(chip_id) - 1);
|
|
chip_id[sizeof(chip_id) - 1] = '\0';
|
|
for (i = 0; i < sizeof(aic_chip_ids) / sizeof(aic_chip_ids[0]); i++) {
|
|
if (!strcmp(chip_id, aic_chip_ids[i].idstring)) {
|
|
aic->chip_type = aic_chip_ids[i].type;
|
|
break;
|
|
}
|
|
}
|
|
|
|
porta = aic_inb(aic, PORTA);
|
|
portb = aic_inb(aic, PORTB);
|
|
|
|
aic->initiator = PORTA_ID(porta);
|
|
if (PORTA_PARITY(porta))
|
|
aic->flags |= AIC_PARITY_ENABLE;
|
|
if (PORTB_DISC(portb))
|
|
aic->flags |= AIC_DISC_ENABLE;
|
|
if (PORTB_DMA(portb))
|
|
aic->flags |= AIC_DMA_ENABLE;
|
|
|
|
/*
|
|
* We can do fast SCSI (10MHz clock rate) if bit 4 of portb
|
|
* is set and we've got a 6360. The 6260 can only do standard
|
|
* 5MHz SCSI.
|
|
*/
|
|
if (aic->chip_type > AIC6260 || aic_inb(aic, REV)) {
|
|
if (PORTB_FSYNC(portb))
|
|
aic->flags |= AIC_FAST_ENABLE;
|
|
aic->flags |= AIC_DWIO_ENABLE;
|
|
}
|
|
|
|
if (aic->flags & AIC_FAST_ENABLE)
|
|
aic->max_period = AIC_FAST_SYNC_PERIOD;
|
|
else
|
|
aic->max_period = AIC_SYNC_PERIOD;
|
|
aic->min_period = AIC_MIN_SYNC_PERIOD;
|
|
|
|
for (i = 255; i >= 0; i--) {
|
|
scb = &aic->scbs[i];
|
|
scb->tag = i;
|
|
callout_init_mtx(&scb->timer, &aic->lock, 0);
|
|
aic_free_scb(aic, scb);
|
|
}
|
|
|
|
for (i = 0; i < 8; i++) {
|
|
if (i == aic->initiator)
|
|
continue;
|
|
ti = &aic->tinfo[i];
|
|
bzero(ti, sizeof(*ti));
|
|
ti->flags = TINFO_TAG_ENB;
|
|
if (aic->flags & AIC_DISC_ENABLE)
|
|
ti->flags |= TINFO_DISC_ENB;
|
|
ti->user.period = aic->max_period;
|
|
ti->user.offset = AIC_SYNC_OFFSET;
|
|
ti->scsirate = 0;
|
|
}
|
|
|
|
aic_outb(aic, DMACNTRL0, INTEN);
|
|
}
|
|
|
|
int
|
|
aic_probe(struct aic_softc *aic)
|
|
{
|
|
int i;
|
|
|
|
/* Remove aic6360 from possible powerdown mode */
|
|
aic_outb(aic, DMACNTRL0, 0);
|
|
|
|
#define STSIZE 16
|
|
aic_outb(aic, DMACNTRL1, 0); /* Reset stack pointer */
|
|
for (i = 0; i < STSIZE; i++)
|
|
aic_outb(aic, STACK, i);
|
|
|
|
/* See if we can pull out the same sequence */
|
|
aic_outb(aic, DMACNTRL1, 0);
|
|
for (i = 0; i < STSIZE && aic_inb(aic, STACK) == i; i++)
|
|
;
|
|
if (i != STSIZE)
|
|
return (ENXIO);
|
|
#undef STSIZE
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
aic_attach(struct aic_softc *aic)
|
|
{
|
|
struct cam_devq *devq;
|
|
|
|
/*
|
|
* Create the device queue for our SIM.
|
|
*/
|
|
devq = cam_simq_alloc(256);
|
|
if (devq == NULL)
|
|
return (ENOMEM);
|
|
|
|
/*
|
|
* Construct our SIM entry
|
|
*/
|
|
aic->sim = cam_sim_alloc(aic_action, aic_poll, "aic", aic,
|
|
device_get_unit(aic->dev), &aic->lock, 2, 256, devq);
|
|
if (aic->sim == NULL) {
|
|
cam_simq_free(devq);
|
|
return (ENOMEM);
|
|
}
|
|
|
|
mtx_lock(&aic->lock);
|
|
if (xpt_bus_register(aic->sim, aic->dev, 0) != CAM_SUCCESS) {
|
|
cam_sim_free(aic->sim, /*free_devq*/TRUE);
|
|
mtx_unlock(&aic->lock);
|
|
return (ENXIO);
|
|
}
|
|
|
|
if (xpt_create_path(&aic->path, /*periph*/NULL,
|
|
cam_sim_path(aic->sim), CAM_TARGET_WILDCARD,
|
|
CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
|
|
xpt_bus_deregister(cam_sim_path(aic->sim));
|
|
cam_sim_free(aic->sim, /*free_devq*/TRUE);
|
|
mtx_unlock(&aic->lock);
|
|
return (ENXIO);
|
|
}
|
|
|
|
aic_init(aic);
|
|
|
|
device_printf(aic->dev, "%s", aic_chip_names[aic->chip_type]);
|
|
if (aic->flags & AIC_DMA_ENABLE)
|
|
printf(", dma");
|
|
if (aic->flags & AIC_DISC_ENABLE)
|
|
printf(", disconnection");
|
|
if (aic->flags & AIC_PARITY_ENABLE)
|
|
printf(", parity check");
|
|
if (aic->flags & AIC_FAST_ENABLE)
|
|
printf(", fast SCSI");
|
|
printf("\n");
|
|
mtx_unlock(&aic->lock);
|
|
return (0);
|
|
}
|
|
|
|
int
|
|
aic_detach(struct aic_softc *aic)
|
|
{
|
|
struct aic_scb *scb;
|
|
int i;
|
|
|
|
mtx_lock(&aic->lock);
|
|
xpt_async(AC_LOST_DEVICE, aic->path, NULL);
|
|
xpt_free_path(aic->path);
|
|
xpt_bus_deregister(cam_sim_path(aic->sim));
|
|
cam_sim_free(aic->sim, /*free_devq*/TRUE);
|
|
mtx_unlock(&aic->lock);
|
|
for (i = 255; i >= 0; i--) {
|
|
scb = &aic->scbs[i];
|
|
callout_drain(&scb->timer);
|
|
}
|
|
return (0);
|
|
}
|