49ba3f32c8
This is an undocumented register that we need to set if we do not want to rely on u-boot or other bootloader.
726 lines
19 KiB
C
726 lines
19 KiB
C
/*-
|
|
* Copyright (c) 2016 Jared McNeill <jmcneill@invisible.ca>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* Allwinner A10/A20 HDMI TX
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/condvar.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
|
|
#include <machine/bus.h>
|
|
|
|
#include <dev/ofw/ofw_bus.h>
|
|
#include <dev/ofw/ofw_bus_subr.h>
|
|
|
|
#include <dev/videomode/videomode.h>
|
|
#include <dev/videomode/edidvar.h>
|
|
|
|
#include <dev/extres/clk/clk.h>
|
|
|
|
#include "hdmi_if.h"
|
|
|
|
#define HDMI_CTRL 0x004
|
|
#define CTRL_MODULE_EN (1 << 31)
|
|
#define HDMI_INT_STATUS 0x008
|
|
#define HDMI_HPD 0x00c
|
|
#define HPD_DET (1 << 0)
|
|
#define HDMI_VID_CTRL 0x010
|
|
#define VID_CTRL_VIDEO_EN (1 << 31)
|
|
#define VID_CTRL_HDMI_MODE (1 << 30)
|
|
#define VID_CTRL_INTERLACE (1 << 4)
|
|
#define VID_CTRL_REPEATER_2X (1 << 0)
|
|
#define HDMI_VID_TIMING0 0x014
|
|
#define VID_ACT_V(v) (((v) - 1) << 16)
|
|
#define VID_ACT_H(h) (((h) - 1) << 0)
|
|
#define HDMI_VID_TIMING1 0x018
|
|
#define VID_VBP(vbp) (((vbp) - 1) << 16)
|
|
#define VID_HBP(hbp) (((hbp) - 1) << 0)
|
|
#define HDMI_VID_TIMING2 0x01c
|
|
#define VID_VFP(vfp) (((vfp) - 1) << 16)
|
|
#define VID_HFP(hfp) (((hfp) - 1) << 0)
|
|
#define HDMI_VID_TIMING3 0x020
|
|
#define VID_VSPW(vspw) (((vspw) - 1) << 16)
|
|
#define VID_HSPW(hspw) (((hspw) - 1) << 0)
|
|
#define HDMI_VID_TIMING4 0x024
|
|
#define TX_CLOCK_NORMAL 0x03e00000
|
|
#define VID_VSYNC_ACTSEL (1 << 1)
|
|
#define VID_HSYNC_ACTSEL (1 << 0)
|
|
#define HDMI_AUD_CTRL 0x040
|
|
#define AUD_CTRL_EN (1 << 31)
|
|
#define AUD_CTRL_RST (1 << 30)
|
|
#define HDMI_ADMA_CTRL 0x044
|
|
#define HDMI_ADMA_MODE (1 << 31)
|
|
#define HDMI_ADMA_MODE_DDMA (0 << 31)
|
|
#define HDMI_ADMA_MODE_NDMA (1 << 31)
|
|
#define HDMI_AUD_FMT 0x048
|
|
#define AUD_FMT_CH(n) ((n) - 1)
|
|
#define HDMI_PCM_CTRL 0x04c
|
|
#define HDMI_AUD_CTS 0x050
|
|
#define HDMI_AUD_N 0x054
|
|
#define HDMI_AUD_CH_STATUS0 0x058
|
|
#define CH_STATUS0_FS_FREQ (0xf << 24)
|
|
#define CH_STATUS0_FS_FREQ_48 (2 << 24)
|
|
#define HDMI_AUD_CH_STATUS1 0x05c
|
|
#define CH_STATUS1_WORD_LEN (0x7 << 1)
|
|
#define CH_STATUS1_WORD_LEN_16 (1 << 1)
|
|
#define HDMI_AUDIO_RESET_RETRY 1000
|
|
#define HDMI_AUDIO_CHANNELS 2
|
|
#define HDMI_AUDIO_CHANNELMAP 0x76543210
|
|
#define HDMI_AUDIO_N 6144 /* 48 kHz */
|
|
#define HDMI_AUDIO_CTS(r, n) ((((r) * 10) * ((n) / 128)) / 480)
|
|
#define HDMI_PADCTRL0 0x200
|
|
#define PADCTRL0_BIASEN (1 << 31)
|
|
#define PADCTRL0_LDOCEN (1 << 30)
|
|
#define PADCTRL0_LDODEN (1 << 29)
|
|
#define PADCTRL0_PWENC (1 << 28)
|
|
#define PADCTRL0_PWEND (1 << 27)
|
|
#define PADCTRL0_PWENG (1 << 26)
|
|
#define PADCTRL0_CKEN (1 << 25)
|
|
#define PADCTRL0_SEN (1 << 24)
|
|
#define PADCTRL0_TXEN (1 << 23)
|
|
#define HDMI_PADCTRL1 0x204
|
|
#define PADCTRL1_AMP_OPT (1 << 23)
|
|
#define PADCTRL1_AMPCK_OPT (1 << 22)
|
|
#define PADCTRL1_DMP_OPT (1 << 21)
|
|
#define PADCTRL1_EMP_OPT (1 << 20)
|
|
#define PADCTRL1_EMPCK_OPT (1 << 19)
|
|
#define PADCTRL1_PWSCK (1 << 18)
|
|
#define PADCTRL1_PWSDT (1 << 17)
|
|
#define PADCTRL1_REG_CSMPS (1 << 16)
|
|
#define PADCTRL1_REG_DEN (1 << 15)
|
|
#define PADCTRL1_REG_DENCK (1 << 14)
|
|
#define PADCTRL1_REG_PLRCK (1 << 13)
|
|
#define PADCTRL1_REG_EMP (0x7 << 10)
|
|
#define PADCTRL1_REG_EMP_EN (0x2 << 10)
|
|
#define PADCTRL1_REG_CD (0x3 << 8)
|
|
#define PADCTRL1_REG_CKSS (0x3 << 6)
|
|
#define PADCTRL1_REG_CKSS_1X (0x1 << 6)
|
|
#define PADCTRL1_REG_CKSS_2X (0x0 << 6)
|
|
#define PADCTRL1_REG_AMP (0x7 << 3)
|
|
#define PADCTRL1_REG_AMP_EN (0x6 << 3)
|
|
#define PADCTRL1_REG_PLR (0x7 << 0)
|
|
#define HDMI_PLLCTRL0 0x208
|
|
#define PLLCTRL0_PLL_EN (1 << 31)
|
|
#define PLLCTRL0_BWS (1 << 30)
|
|
#define PLLCTRL0_HV_IS_33 (1 << 29)
|
|
#define PLLCTRL0_LDO1_EN (1 << 28)
|
|
#define PLLCTRL0_LDO2_EN (1 << 27)
|
|
#define PLLCTRL0_SDIV2 (1 << 25)
|
|
#define PLLCTRL0_VCO_GAIN (0x1 << 22)
|
|
#define PLLCTRL0_S (0x7 << 17)
|
|
#define PLLCTRL0_CP_S (0xf << 12)
|
|
#define PLLCTRL0_CS (0x7 << 8)
|
|
#define PLLCTRL0_PREDIV(x) ((x) << 4)
|
|
#define PLLCTRL0_VCO_S (0x8 << 0)
|
|
#define HDMI_PLLDBG0 0x20c
|
|
#define PLLDBG0_CKIN_SEL (1 << 21)
|
|
#define PLLDBG0_CKIN_SEL_PLL3 (0 << 21)
|
|
#define PLLDBG0_CKIN_SEL_PLL7 (1 << 21)
|
|
#define HDMI_PKTCTRL0 0x2f0
|
|
#define HDMI_PKTCTRL1 0x2f4
|
|
#define PKTCTRL_PACKET(n,t) ((t) << ((n) << 2))
|
|
#define PKT_NULL 0
|
|
#define PKT_GC 1
|
|
#define PKT_AVI 2
|
|
#define PKT_AI 3
|
|
#define PKT_SPD 5
|
|
#define PKT_END 15
|
|
#define DDC_CTRL 0x500
|
|
#define CTRL_DDC_EN (1 << 31)
|
|
#define CTRL_DDC_ACMD_START (1 << 30)
|
|
#define CTRL_DDC_FIFO_DIR (1 << 8)
|
|
#define CTRL_DDC_FIFO_DIR_READ (0 << 8)
|
|
#define CTRL_DDC_FIFO_DIR_WRITE (1 << 8)
|
|
#define CTRL_DDC_SWRST (1 << 0)
|
|
#define DDC_SLAVE_ADDR 0x504
|
|
#define SLAVE_ADDR_SEG_SHIFT 24
|
|
#define SLAVE_ADDR_EDDC_SHIFT 16
|
|
#define SLAVE_ADDR_OFFSET_SHIFT 8
|
|
#define SLAVE_ADDR_SHIFT 0
|
|
#define DDC_INT_STATUS 0x50c
|
|
#define INT_STATUS_XFER_DONE (1 << 0)
|
|
#define DDC_FIFO_CTRL 0x510
|
|
#define FIFO_CTRL_CLEAR (1 << 31)
|
|
#define DDC_BYTE_COUNTER 0x51c
|
|
#define DDC_COMMAND 0x520
|
|
#define COMMAND_EOREAD (4 << 0)
|
|
#define DDC_CLOCK 0x528
|
|
#define DDC_CLOCK_M (1 << 3)
|
|
#define DDC_CLOCK_N (5 << 0)
|
|
#define DDC_FIFO 0x518
|
|
#define SWRST_DELAY 1000
|
|
#define DDC_DELAY 1000
|
|
#define DDC_RETRY 1000
|
|
#define DDC_BLKLEN 16
|
|
#define DDC_ADDR 0x50
|
|
#define EDDC_ADDR 0x60
|
|
#define EDID_LENGTH 128
|
|
#define DDC_CTRL_LINE 0x540
|
|
#define DDC_LINE_SCL_ENABLE (1 << 8)
|
|
#define DDC_LINE_SDA_ENABLE (1 << 9)
|
|
#define HDMI_ENABLE_DELAY 50000
|
|
#define DDC_READ_RETRY 4
|
|
#define EXT_TAG 0x00
|
|
#define CEA_TAG_ID 0x02
|
|
#define CEA_DTD 0x03
|
|
#define DTD_BASIC_AUDIO (1 << 6)
|
|
#define CEA_REV 0x02
|
|
#define CEA_DATA_OFF 0x03
|
|
#define CEA_DATA_START 4
|
|
#define BLOCK_TAG(x) (((x) >> 5) & 0x7)
|
|
#define BLOCK_TAG_VSDB 3
|
|
#define BLOCK_LEN(x) ((x) & 0x1f)
|
|
#define HDMI_VSDB_MINLEN 5
|
|
#define HDMI_OUI "\x03\x0c\x00"
|
|
#define HDMI_OUI_LEN 3
|
|
#define HDMI_DEFAULT_FREQ 297000000
|
|
|
|
struct a10hdmi_softc {
|
|
struct resource *res;
|
|
|
|
struct intr_config_hook mode_hook;
|
|
|
|
uint8_t edid[EDID_LENGTH];
|
|
|
|
int has_hdmi;
|
|
int has_audio;
|
|
|
|
clk_t clk_ahb;
|
|
clk_t clk_hdmi;
|
|
clk_t clk_lcd;
|
|
};
|
|
|
|
static struct resource_spec a10hdmi_spec[] = {
|
|
{ SYS_RES_MEMORY, 0, RF_ACTIVE },
|
|
{ -1, 0 }
|
|
};
|
|
|
|
#define HDMI_READ(sc, reg) bus_read_4((sc)->res, (reg))
|
|
#define HDMI_WRITE(sc, reg, val) bus_write_4((sc)->res, (reg), (val))
|
|
|
|
static void
|
|
a10hdmi_init(struct a10hdmi_softc *sc)
|
|
{
|
|
/* Enable the HDMI module */
|
|
HDMI_WRITE(sc, HDMI_CTRL, CTRL_MODULE_EN);
|
|
|
|
/* Configure PLL/DRV settings */
|
|
HDMI_WRITE(sc, HDMI_PADCTRL0, PADCTRL0_BIASEN | PADCTRL0_LDOCEN |
|
|
PADCTRL0_LDODEN | PADCTRL0_PWENC | PADCTRL0_PWEND |
|
|
PADCTRL0_PWENG | PADCTRL0_CKEN | PADCTRL0_TXEN);
|
|
HDMI_WRITE(sc, HDMI_PADCTRL1, PADCTRL1_AMP_OPT | PADCTRL1_AMPCK_OPT |
|
|
PADCTRL1_EMP_OPT | PADCTRL1_EMPCK_OPT | PADCTRL1_REG_DEN |
|
|
PADCTRL1_REG_DENCK | PADCTRL1_REG_EMP_EN | PADCTRL1_REG_AMP_EN);
|
|
|
|
/* Select PLL3 as input clock */
|
|
HDMI_WRITE(sc, HDMI_PLLDBG0, PLLDBG0_CKIN_SEL_PLL3);
|
|
|
|
DELAY(HDMI_ENABLE_DELAY);
|
|
}
|
|
|
|
static void
|
|
a10hdmi_hpd(void *arg)
|
|
{
|
|
struct a10hdmi_softc *sc;
|
|
device_t dev;
|
|
uint32_t hpd;
|
|
|
|
dev = arg;
|
|
sc = device_get_softc(dev);
|
|
|
|
hpd = HDMI_READ(sc, HDMI_HPD);
|
|
if ((hpd & HPD_DET) == HPD_DET)
|
|
EVENTHANDLER_INVOKE(hdmi_event, dev, HDMI_EVENT_CONNECTED);
|
|
|
|
config_intrhook_disestablish(&sc->mode_hook);
|
|
}
|
|
|
|
static int
|
|
a10hdmi_probe(device_t dev)
|
|
{
|
|
if (!ofw_bus_status_okay(dev))
|
|
return (ENXIO);
|
|
|
|
if (!ofw_bus_is_compatible(dev, "allwinner,sun7i-a20-hdmi"))
|
|
return (ENXIO);
|
|
|
|
device_set_desc(dev, "Allwinner HDMI TX");
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
|
|
static int
|
|
a10hdmi_attach(device_t dev)
|
|
{
|
|
struct a10hdmi_softc *sc;
|
|
int error;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (bus_alloc_resources(dev, a10hdmi_spec, &sc->res)) {
|
|
device_printf(dev, "cannot allocate resources for device\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* Setup clocks */
|
|
error = clk_get_by_ofw_name(dev, 0, "ahb", &sc->clk_ahb);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot find ahb clock\n");
|
|
return (error);
|
|
}
|
|
error = clk_get_by_ofw_name(dev, 0, "hdmi", &sc->clk_hdmi);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot find hdmi clock\n");
|
|
return (error);
|
|
}
|
|
error = clk_get_by_ofw_name(dev, 0, "lcd", &sc->clk_lcd);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot find lcd clock\n");
|
|
}
|
|
/* Enable HDMI clock */
|
|
error = clk_enable(sc->clk_hdmi);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot enable hdmi clock\n");
|
|
return (error);
|
|
}
|
|
/* Gating AHB clock for HDMI */
|
|
error = clk_enable(sc->clk_ahb);
|
|
if (error != 0) {
|
|
device_printf(dev, "cannot enable ahb gate\n");
|
|
return (error);
|
|
}
|
|
|
|
a10hdmi_init(sc);
|
|
|
|
sc->mode_hook.ich_func = a10hdmi_hpd;
|
|
sc->mode_hook.ich_arg = dev;
|
|
|
|
error = config_intrhook_establish(&sc->mode_hook);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
a10hdmi_ddc_xfer(struct a10hdmi_softc *sc, uint16_t addr, uint8_t seg,
|
|
uint8_t off, int len)
|
|
{
|
|
uint32_t val;
|
|
int retry;
|
|
|
|
/* Set FIFO direction to read */
|
|
val = HDMI_READ(sc, DDC_CTRL);
|
|
val &= ~CTRL_DDC_FIFO_DIR;
|
|
val |= CTRL_DDC_FIFO_DIR_READ;
|
|
HDMI_WRITE(sc, DDC_CTRL, val);
|
|
|
|
/* Setup DDC slave address */
|
|
val = (addr << SLAVE_ADDR_SHIFT) | (seg << SLAVE_ADDR_SEG_SHIFT) |
|
|
(EDDC_ADDR << SLAVE_ADDR_EDDC_SHIFT) |
|
|
(off << SLAVE_ADDR_OFFSET_SHIFT);
|
|
HDMI_WRITE(sc, DDC_SLAVE_ADDR, val);
|
|
|
|
/* Clear FIFO */
|
|
val = HDMI_READ(sc, DDC_FIFO_CTRL);
|
|
val |= FIFO_CTRL_CLEAR;
|
|
HDMI_WRITE(sc, DDC_FIFO_CTRL, val);
|
|
|
|
/* Set transfer length */
|
|
HDMI_WRITE(sc, DDC_BYTE_COUNTER, len);
|
|
|
|
/* Set command to "Explicit Offset Address Read" */
|
|
HDMI_WRITE(sc, DDC_COMMAND, COMMAND_EOREAD);
|
|
|
|
/* Start transfer */
|
|
val = HDMI_READ(sc, DDC_CTRL);
|
|
val |= CTRL_DDC_ACMD_START;
|
|
HDMI_WRITE(sc, DDC_CTRL, val);
|
|
|
|
/* Wait for command to start */
|
|
retry = DDC_RETRY;
|
|
while (--retry > 0) {
|
|
val = HDMI_READ(sc, DDC_CTRL);
|
|
if ((val & CTRL_DDC_ACMD_START) == 0)
|
|
break;
|
|
DELAY(DDC_DELAY);
|
|
}
|
|
if (retry == 0)
|
|
return (ETIMEDOUT);
|
|
|
|
/* Ensure that the transfer completed */
|
|
val = HDMI_READ(sc, DDC_INT_STATUS);
|
|
if ((val & INT_STATUS_XFER_DONE) == 0)
|
|
return (EIO);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
a10hdmi_ddc_read(struct a10hdmi_softc *sc, int block, uint8_t *edid)
|
|
{
|
|
int resid, off, len, error;
|
|
uint8_t *pbuf;
|
|
|
|
pbuf = edid;
|
|
resid = EDID_LENGTH;
|
|
off = (block & 1) ? EDID_LENGTH : 0;
|
|
|
|
while (resid > 0) {
|
|
len = min(resid, DDC_BLKLEN);
|
|
error = a10hdmi_ddc_xfer(sc, DDC_ADDR, block >> 1, off, len);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
bus_read_multi_1(sc->res, DDC_FIFO, pbuf, len);
|
|
|
|
pbuf += len;
|
|
off += len;
|
|
resid -= len;
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
a10hdmi_detect_hdmi_vsdb(uint8_t *edid)
|
|
{
|
|
int off, p, btag, blen;
|
|
|
|
if (edid[EXT_TAG] != CEA_TAG_ID)
|
|
return (0);
|
|
|
|
off = edid[CEA_DATA_OFF];
|
|
|
|
/* CEA data block collection starts at byte 4 */
|
|
if (off <= CEA_DATA_START)
|
|
return (0);
|
|
|
|
/* Parse the CEA data blocks */
|
|
for (p = CEA_DATA_START; p < off;) {
|
|
btag = BLOCK_TAG(edid[p]);
|
|
blen = BLOCK_LEN(edid[p]);
|
|
|
|
/* Make sure the length is sane */
|
|
if (p + blen + 1 > off)
|
|
break;
|
|
|
|
/* Look for a VSDB with the HDMI 24-bit IEEE registration ID */
|
|
if (btag == BLOCK_TAG_VSDB && blen >= HDMI_VSDB_MINLEN &&
|
|
memcmp(&edid[p + 1], HDMI_OUI, HDMI_OUI_LEN) == 0)
|
|
return (1);
|
|
|
|
/* Next data block */
|
|
p += (1 + blen);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
a10hdmi_detect_hdmi(struct a10hdmi_softc *sc, int *phdmi, int *paudio)
|
|
{
|
|
struct edid_info ei;
|
|
uint8_t edid[EDID_LENGTH];
|
|
int block;
|
|
|
|
*phdmi = *paudio = 0;
|
|
|
|
if (edid_parse(sc->edid, &ei) != 0)
|
|
return;
|
|
|
|
/* Scan through extension blocks, looking for a CEA-861 block. */
|
|
for (block = 1; block <= ei.edid_ext_block_count; block++) {
|
|
if (a10hdmi_ddc_read(sc, block, edid) != 0)
|
|
return;
|
|
|
|
if (a10hdmi_detect_hdmi_vsdb(edid) != 0) {
|
|
*phdmi = 1;
|
|
*paudio = ((edid[CEA_DTD] & DTD_BASIC_AUDIO) != 0);
|
|
return;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
a10hdmi_get_edid(device_t dev, uint8_t **edid, uint32_t *edid_len)
|
|
{
|
|
struct a10hdmi_softc *sc;
|
|
int error, retry;
|
|
|
|
sc = device_get_softc(dev);
|
|
retry = DDC_READ_RETRY;
|
|
|
|
while (--retry > 0) {
|
|
/* I2C software reset */
|
|
HDMI_WRITE(sc, DDC_FIFO_CTRL, 0);
|
|
HDMI_WRITE(sc, DDC_CTRL, CTRL_DDC_EN | CTRL_DDC_SWRST);
|
|
DELAY(SWRST_DELAY);
|
|
if (HDMI_READ(sc, DDC_CTRL) & CTRL_DDC_SWRST) {
|
|
device_printf(dev, "DDC software reset failed\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* Configure DDC clock */
|
|
HDMI_WRITE(sc, DDC_CLOCK, DDC_CLOCK_M | DDC_CLOCK_N);
|
|
|
|
/* Enable SDA/SCL */
|
|
HDMI_WRITE(sc, DDC_CTRL_LINE,
|
|
DDC_LINE_SCL_ENABLE | DDC_LINE_SDA_ENABLE);
|
|
|
|
/* Read EDID block */
|
|
error = a10hdmi_ddc_read(sc, 0, sc->edid);
|
|
if (error == 0) {
|
|
*edid = sc->edid;
|
|
*edid_len = sizeof(sc->edid);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (error == 0)
|
|
a10hdmi_detect_hdmi(sc, &sc->has_hdmi, &sc->has_audio);
|
|
else
|
|
sc->has_hdmi = sc->has_audio = 0;
|
|
|
|
return (error);
|
|
}
|
|
|
|
static void
|
|
a10hdmi_set_audiomode(device_t dev, const struct videomode *mode)
|
|
{
|
|
struct a10hdmi_softc *sc;
|
|
uint32_t val;
|
|
int retry;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
/* Disable and reset audio module and wait for reset bit to clear */
|
|
HDMI_WRITE(sc, HDMI_AUD_CTRL, AUD_CTRL_RST);
|
|
for (retry = HDMI_AUDIO_RESET_RETRY; retry > 0; retry--) {
|
|
val = HDMI_READ(sc, HDMI_AUD_CTRL);
|
|
if ((val & AUD_CTRL_RST) == 0)
|
|
break;
|
|
}
|
|
if (retry == 0) {
|
|
device_printf(dev, "timeout waiting for audio module\n");
|
|
return;
|
|
}
|
|
|
|
if (!sc->has_audio)
|
|
return;
|
|
|
|
/* DMA and FIFO control */
|
|
HDMI_WRITE(sc, HDMI_ADMA_CTRL, HDMI_ADMA_MODE_DDMA);
|
|
|
|
/* Audio format control (LPCM, S16LE, stereo) */
|
|
HDMI_WRITE(sc, HDMI_AUD_FMT, AUD_FMT_CH(HDMI_AUDIO_CHANNELS));
|
|
|
|
/* Channel mappings */
|
|
HDMI_WRITE(sc, HDMI_PCM_CTRL, HDMI_AUDIO_CHANNELMAP);
|
|
|
|
/* Clocks */
|
|
HDMI_WRITE(sc, HDMI_AUD_CTS,
|
|
HDMI_AUDIO_CTS(mode->dot_clock, HDMI_AUDIO_N));
|
|
HDMI_WRITE(sc, HDMI_AUD_N, HDMI_AUDIO_N);
|
|
|
|
/* Set sampling frequency to 48 kHz, word length to 16-bit */
|
|
HDMI_WRITE(sc, HDMI_AUD_CH_STATUS0, CH_STATUS0_FS_FREQ_48);
|
|
HDMI_WRITE(sc, HDMI_AUD_CH_STATUS1, CH_STATUS1_WORD_LEN_16);
|
|
|
|
/* Enable */
|
|
HDMI_WRITE(sc, HDMI_AUD_CTRL, AUD_CTRL_EN);
|
|
}
|
|
|
|
static int
|
|
a10hdmi_get_tcon_config(struct a10hdmi_softc *sc, int *div, int *dbl)
|
|
{
|
|
uint64_t lcd_fin, lcd_fout;
|
|
clk_t clk_lcd_parent;
|
|
const char *pname;
|
|
int error;
|
|
|
|
error = clk_get_parent(sc->clk_lcd, &clk_lcd_parent);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
/* Get the LCD CH1 special clock 2 divider */
|
|
error = clk_get_freq(sc->clk_lcd, &lcd_fout);
|
|
if (error != 0)
|
|
return (error);
|
|
error = clk_get_freq(clk_lcd_parent, &lcd_fin);
|
|
if (error != 0)
|
|
return (error);
|
|
*div = lcd_fin / lcd_fout;
|
|
|
|
/* Detect LCD CH1 special clock using a 1X or 2X source */
|
|
/* XXX */
|
|
pname = clk_get_name(clk_lcd_parent);
|
|
if (strcmp(pname, "pll3") == 0 || strcmp(pname, "pll7") == 0)
|
|
*dbl = 0;
|
|
else
|
|
*dbl = 1;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
a10hdmi_set_videomode(device_t dev, const struct videomode *mode)
|
|
{
|
|
struct a10hdmi_softc *sc;
|
|
int error, clk_div, clk_dbl;
|
|
int dblscan, hfp, hspw, hbp, vfp, vspw, vbp;
|
|
uint32_t val;
|
|
|
|
sc = device_get_softc(dev);
|
|
dblscan = !!(mode->flags & VID_DBLSCAN);
|
|
hfp = mode->hsync_start - mode->hdisplay;
|
|
hspw = mode->hsync_end - mode->hsync_start;
|
|
hbp = mode->htotal - mode->hsync_start;
|
|
vfp = mode->vsync_start - mode->vdisplay;
|
|
vspw = mode->vsync_end - mode->vsync_start;
|
|
vbp = mode->vtotal - mode->vsync_start;
|
|
|
|
error = a10hdmi_get_tcon_config(sc, &clk_div, &clk_dbl);
|
|
if (error != 0) {
|
|
device_printf(dev, "couldn't get tcon config: %d\n", error);
|
|
return (error);
|
|
}
|
|
|
|
/* Clear interrupt status */
|
|
HDMI_WRITE(sc, HDMI_INT_STATUS, HDMI_READ(sc, HDMI_INT_STATUS));
|
|
|
|
/* Clock setup */
|
|
val = HDMI_READ(sc, HDMI_PADCTRL1);
|
|
val &= ~PADCTRL1_REG_CKSS;
|
|
val |= (clk_dbl ? PADCTRL1_REG_CKSS_2X : PADCTRL1_REG_CKSS_1X);
|
|
HDMI_WRITE(sc, HDMI_PADCTRL1, val);
|
|
HDMI_WRITE(sc, HDMI_PLLCTRL0, PLLCTRL0_PLL_EN | PLLCTRL0_BWS |
|
|
PLLCTRL0_HV_IS_33 | PLLCTRL0_LDO1_EN | PLLCTRL0_LDO2_EN |
|
|
PLLCTRL0_SDIV2 | PLLCTRL0_VCO_GAIN | PLLCTRL0_S |
|
|
PLLCTRL0_CP_S | PLLCTRL0_CS | PLLCTRL0_PREDIV(clk_div) |
|
|
PLLCTRL0_VCO_S);
|
|
|
|
/* Setup display settings */
|
|
if (bootverbose)
|
|
device_printf(dev, "HDMI: %s, Audio: %s\n",
|
|
sc->has_hdmi ? "yes" : "no", sc->has_audio ? "yes" : "no");
|
|
val = 0;
|
|
if (sc->has_hdmi)
|
|
val |= VID_CTRL_HDMI_MODE;
|
|
if (mode->flags & VID_INTERLACE)
|
|
val |= VID_CTRL_INTERLACE;
|
|
if (mode->flags & VID_DBLSCAN)
|
|
val |= VID_CTRL_REPEATER_2X;
|
|
HDMI_WRITE(sc, HDMI_VID_CTRL, val);
|
|
|
|
/* Setup display timings */
|
|
HDMI_WRITE(sc, HDMI_VID_TIMING0,
|
|
VID_ACT_V(mode->vdisplay) | VID_ACT_H(mode->hdisplay << dblscan));
|
|
HDMI_WRITE(sc, HDMI_VID_TIMING1,
|
|
VID_VBP(vbp) | VID_HBP(hbp << dblscan));
|
|
HDMI_WRITE(sc, HDMI_VID_TIMING2,
|
|
VID_VFP(vfp) | VID_HFP(hfp << dblscan));
|
|
HDMI_WRITE(sc, HDMI_VID_TIMING3,
|
|
VID_VSPW(vspw) | VID_HSPW(hspw << dblscan));
|
|
val = TX_CLOCK_NORMAL;
|
|
if (mode->flags & VID_PVSYNC)
|
|
val |= VID_VSYNC_ACTSEL;
|
|
if (mode->flags & VID_PHSYNC)
|
|
val |= VID_HSYNC_ACTSEL;
|
|
HDMI_WRITE(sc, HDMI_VID_TIMING4, val);
|
|
|
|
/* This is an ordered list of infoframe packets that the HDMI
|
|
* transmitter will send. Transmit packets in the following order:
|
|
* 1. General control packet
|
|
* 2. AVI infoframe
|
|
* 3. Audio infoframe
|
|
* There are 2 registers with 4 slots each. The list is terminated
|
|
* with the special PKT_END marker.
|
|
*/
|
|
HDMI_WRITE(sc, HDMI_PKTCTRL0,
|
|
PKTCTRL_PACKET(0, PKT_GC) | PKTCTRL_PACKET(1, PKT_AVI) |
|
|
PKTCTRL_PACKET(2, PKT_AI) | PKTCTRL_PACKET(3, PKT_END));
|
|
HDMI_WRITE(sc, HDMI_PKTCTRL1, 0);
|
|
|
|
/* Setup audio */
|
|
a10hdmi_set_audiomode(dev, mode);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
a10hdmi_enable(device_t dev, int onoff)
|
|
{
|
|
struct a10hdmi_softc *sc;
|
|
uint32_t val;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
/* Enable or disable video output */
|
|
val = HDMI_READ(sc, HDMI_VID_CTRL);
|
|
if (onoff)
|
|
val |= VID_CTRL_VIDEO_EN;
|
|
else
|
|
val &= ~VID_CTRL_VIDEO_EN;
|
|
HDMI_WRITE(sc, HDMI_VID_CTRL, val);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static device_method_t a10hdmi_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, a10hdmi_probe),
|
|
DEVMETHOD(device_attach, a10hdmi_attach),
|
|
|
|
/* HDMI interface */
|
|
DEVMETHOD(hdmi_get_edid, a10hdmi_get_edid),
|
|
DEVMETHOD(hdmi_set_videomode, a10hdmi_set_videomode),
|
|
DEVMETHOD(hdmi_enable, a10hdmi_enable),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t a10hdmi_driver = {
|
|
"a10hdmi",
|
|
a10hdmi_methods,
|
|
sizeof(struct a10hdmi_softc),
|
|
};
|
|
|
|
static devclass_t a10hdmi_devclass;
|
|
|
|
DRIVER_MODULE(a10hdmi, simplebus, a10hdmi_driver, a10hdmi_devclass, 0, 0);
|
|
MODULE_VERSION(a10hdmi, 1);
|