1494 lines
43 KiB
C
1494 lines
43 KiB
C
/*-
|
|
* Copyright (c) 2011
|
|
* Ben Gray <ben.r.gray@gmail.com>.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the company nor the name of the author may be used to
|
|
* endorse or promote products derived from this software without specific
|
|
* prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY BEN GRAY ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL BEN GRAY BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
|
|
* PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
|
|
* OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
* WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
|
|
* OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
|
|
* ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/resource.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/malloc.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <machine/intr.h>
|
|
|
|
#include <arm/arm/mpcore_timervar.h>
|
|
#include <arm/ti/tivar.h>
|
|
#include <arm/ti/ti_prcm.h>
|
|
#include <arm/ti/omap4/omap4_reg.h>
|
|
|
|
#include <dev/ofw/openfirm.h>
|
|
#include <dev/ofw/ofw_bus.h>
|
|
#include <dev/ofw/ofw_bus_subr.h>
|
|
|
|
/*
|
|
* This file defines the clock configuration for the OMAP4xxx series of
|
|
* devices.
|
|
*
|
|
* How This is Suppose to Work
|
|
* ===========================
|
|
* - There is a top level omap_prcm module that defines all OMAP SoC drivers
|
|
* should use to enable/disable the system clocks regardless of the version
|
|
* of OMAP device they are running on. This top level PRCM module is just
|
|
* a thin shim to chip specific functions that perform the donkey work of
|
|
* configuring the clock - this file is the 'donkey' for OMAP44xx devices.
|
|
*
|
|
* - The key bit in this file is the omap_clk_devmap array, it's
|
|
* used by the omap_prcm driver to determine what clocks are valid and which
|
|
* functions to call to manipulate them.
|
|
*
|
|
* - In essence you just need to define some callbacks for each of the
|
|
* clocks and then you're done.
|
|
*
|
|
* - The other thing that is worth noting is that when the omap_prcm device
|
|
* is registered you typically pass in some memory ranges which are the
|
|
* SYS_MEMORY resources. These resources are in turn allocated using
|
|
* bus_allocate_resources(...) and the resource handles are passed to all
|
|
* individual clock callback handlers.
|
|
*
|
|
*
|
|
*
|
|
* OMAP4 devices are different from the previous OMAP3 devices in that there
|
|
* is no longer a separate functional and interface clock for each module,
|
|
* instead there is typically an interface clock that spans many modules.
|
|
*/
|
|
|
|
#define FREQ_96MHZ 96000000
|
|
#define FREQ_64MHZ 64000000
|
|
#define FREQ_48MHZ 48000000
|
|
#define FREQ_32KHZ 32000
|
|
|
|
#define PRM_INSTANCE 1
|
|
#define CM1_INSTANCE 2
|
|
#define CM2_INSTANCE 3
|
|
|
|
/**
|
|
* Address offsets from the PRM memory region to the top level clock control
|
|
* registers.
|
|
*/
|
|
#define CKGEN_PRM_OFFSET 0x00000100UL
|
|
#define MPU_PRM_OFFSET 0x00000300UL
|
|
#define DSP_PRM_OFFSET 0x00000400UL
|
|
#define ABE_PRM_OFFSET 0x00000500UL
|
|
#define ALWAYS_ON_PRM_OFFSET 0x00000600UL
|
|
#define CORE_PRM_OFFSET 0x00000700UL
|
|
#define IVAHD_PRM_OFFSET 0x00000F00UL
|
|
#define CAM_PRM_OFFSET 0x00001000UL
|
|
#define DSS_PRM_OFFSET 0x00001100UL
|
|
#define SGX_PRM_OFFSET 0x00001200UL
|
|
#define L3INIT_PRM_OFFSET 0x00001300UL
|
|
#define L4PER_PRM_OFFSET 0x00001400UL
|
|
#define WKUP_PRM_OFFSET 0x00001700UL
|
|
#define WKUP_CM_OFFSET 0x00001800UL
|
|
#define EMU_PRM_OFFSET 0x00001900UL
|
|
#define EMU_CM_OFFSET 0x00001A00UL
|
|
#define DEVICE_PRM_OFFSET 0x00001B00UL
|
|
#define INSTR_PRM_OFFSET 0x00001F00UL
|
|
|
|
#define CM_ABE_DSS_SYS_CLKSEL_OFFSET (CKGEN_PRM_OFFSET + 0x0000UL)
|
|
#define CM_L4_WKUP_CLKSELL_OFFSET (CKGEN_PRM_OFFSET + 0x0008UL)
|
|
#define CM_ABE_PLL_REF_CLKSEL_OFFSET (CKGEN_PRM_OFFSET + 0x000CUL)
|
|
#define CM_SYS_CLKSEL_OFFSET (CKGEN_PRM_OFFSET + 0x0010UL)
|
|
|
|
/**
|
|
* Address offsets from the CM1 memory region to the top level clock control
|
|
* registers.
|
|
*/
|
|
#define CKGEN_CM1_OFFSET 0x00000100UL
|
|
#define MPU_CM1_OFFSET 0x00000300UL
|
|
#define DSP_CM1_OFFSET 0x00000400UL
|
|
#define ABE_CM1_OFFSET 0x00000500UL
|
|
#define RESTORE_CM1_OFFSET 0x00000E00UL
|
|
#define INSTR_CM1_OFFSET 0x00000F00UL
|
|
|
|
#define CM_CLKSEL_DPLL_MPU (CKGEN_CM1_OFFSET + 0x006CUL)
|
|
|
|
/**
|
|
* Address offsets from the CM2 memory region to the top level clock control
|
|
* registers.
|
|
*/
|
|
#define INTRCONN_SOCKET_CM2_OFFSET 0x00000000UL
|
|
#define CKGEN_CM2_OFFSET 0x00000100UL
|
|
#define ALWAYS_ON_CM2_OFFSET 0x00000600UL
|
|
#define CORE_CM2_OFFSET 0x00000700UL
|
|
#define IVAHD_CM2_OFFSET 0x00000F00UL
|
|
#define CAM_CM2_OFFSET 0x00001000UL
|
|
#define DSS_CM2_OFFSET 0x00001100UL
|
|
#define SGX_CM2_OFFSET 0x00001200UL
|
|
#define L3INIT_CM2_OFFSET 0x00001300UL
|
|
#define L4PER_CM2_OFFSET 0x00001400UL
|
|
#define RESTORE_CM2_OFFSET 0x00001E00UL
|
|
#define INSTR_CM2_OFFSET 0x00001F00UL
|
|
|
|
#define CLKCTRL_MODULEMODE_MASK 0x00000003UL
|
|
#define CLKCTRL_MODULEMODE_DISABLE 0x00000000UL
|
|
#define CLKCTRL_MODULEMODE_AUTO 0x00000001UL
|
|
#define CLKCTRL_MODULEMODE_ENABLE 0x00000001UL
|
|
|
|
#define CLKCTRL_IDLEST_MASK 0x00030000UL
|
|
#define CLKCTRL_IDLEST_ENABLED 0x00000000UL
|
|
#define CLKCTRL_IDLEST_WAKING 0x00010000UL
|
|
#define CLKCTRL_IDLEST_IDLE 0x00020000UL
|
|
#define CLKCTRL_IDLEST_DISABLED 0x00030000UL
|
|
|
|
static struct ofw_compat_data compat_data[] = {
|
|
{"ti,omap4-cm1", (uintptr_t)CM1_INSTANCE},
|
|
{"ti,omap4-cm2", (uintptr_t)CM2_INSTANCE},
|
|
{"ti,omap4-prm", (uintptr_t)PRM_INSTANCE},
|
|
{NULL, (uintptr_t)0},
|
|
};
|
|
|
|
struct omap4_prcm_softc {
|
|
struct resource *sc_res;
|
|
int sc_rid;
|
|
int sc_instance;
|
|
};
|
|
|
|
static int omap4_clk_generic_activate(struct ti_clock_dev *clkdev);
|
|
static int omap4_clk_generic_deactivate(struct ti_clock_dev *clkdev);
|
|
static int omap4_clk_generic_accessible(struct ti_clock_dev *clkdev);
|
|
static int omap4_clk_generic_set_source(struct ti_clock_dev *clkdev, clk_src_t clksrc);
|
|
static int omap4_clk_generic_get_source_freq(struct ti_clock_dev *clkdev, unsigned int *freq);
|
|
|
|
static int omap4_clk_gptimer_set_source(struct ti_clock_dev *clkdev, clk_src_t clksrc);
|
|
static int omap4_clk_gptimer_get_source_freq(struct ti_clock_dev *clkdev, unsigned int *freq);
|
|
|
|
static int omap4_clk_hsmmc_set_source(struct ti_clock_dev *clkdev, clk_src_t clksrc);
|
|
static int omap4_clk_hsmmc_get_source_freq(struct ti_clock_dev *clkdev, unsigned int *freq);
|
|
|
|
static int omap4_clk_hsusbhost_set_source(struct ti_clock_dev *clkdev, clk_src_t clksrc);
|
|
static int omap4_clk_hsusbhost_activate(struct ti_clock_dev *clkdev);
|
|
static int omap4_clk_hsusbhost_deactivate(struct ti_clock_dev *clkdev);
|
|
static int omap4_clk_hsusbhost_accessible(struct ti_clock_dev *clkdev);
|
|
|
|
static int omap4_clk_get_sysclk_freq(struct ti_clock_dev *clkdev, unsigned int *freq);
|
|
static int omap4_clk_get_arm_fclk_freq(struct ti_clock_dev *clkdev, unsigned int *freq);
|
|
|
|
/**
|
|
* omap_clk_devmap - Array of clock devices available on OMAP4xxx devices
|
|
*
|
|
* This map only defines which clocks are valid and the callback functions
|
|
* for clock activate, deactivate, etc. It is used by the top level omap_prcm
|
|
* driver.
|
|
*
|
|
* The actual details of the clocks (config registers, bit fields, sources,
|
|
* etc) are in the private g_omap3_clk_details array below.
|
|
*
|
|
*/
|
|
|
|
#define OMAP4_GENERIC_CLOCK_DEV(i) \
|
|
{ .id = (i), \
|
|
.clk_activate = omap4_clk_generic_activate, \
|
|
.clk_deactivate = omap4_clk_generic_deactivate, \
|
|
.clk_set_source = omap4_clk_generic_set_source, \
|
|
.clk_accessible = omap4_clk_generic_accessible, \
|
|
.clk_get_source_freq = omap4_clk_generic_get_source_freq, \
|
|
.clk_set_source_freq = NULL \
|
|
}
|
|
|
|
#define OMAP4_GPTIMER_CLOCK_DEV(i) \
|
|
{ .id = (i), \
|
|
.clk_activate = omap4_clk_generic_activate, \
|
|
.clk_deactivate = omap4_clk_generic_deactivate, \
|
|
.clk_set_source = omap4_clk_gptimer_set_source, \
|
|
.clk_accessible = omap4_clk_generic_accessible, \
|
|
.clk_get_source_freq = omap4_clk_gptimer_get_source_freq, \
|
|
.clk_set_source_freq = NULL \
|
|
}
|
|
|
|
#define OMAP4_HSMMC_CLOCK_DEV(i) \
|
|
{ .id = (i), \
|
|
.clk_activate = omap4_clk_generic_activate, \
|
|
.clk_deactivate = omap4_clk_generic_deactivate, \
|
|
.clk_set_source = omap4_clk_hsmmc_set_source, \
|
|
.clk_accessible = omap4_clk_generic_accessible, \
|
|
.clk_get_source_freq = omap4_clk_hsmmc_get_source_freq, \
|
|
.clk_set_source_freq = NULL \
|
|
}
|
|
|
|
#define OMAP4_HSUSBHOST_CLOCK_DEV(i) \
|
|
{ .id = (i), \
|
|
.clk_activate = omap4_clk_hsusbhost_activate, \
|
|
.clk_deactivate = omap4_clk_hsusbhost_deactivate, \
|
|
.clk_set_source = omap4_clk_hsusbhost_set_source, \
|
|
.clk_accessible = omap4_clk_hsusbhost_accessible, \
|
|
.clk_get_source_freq = NULL, \
|
|
.clk_set_source_freq = NULL \
|
|
}
|
|
|
|
|
|
struct ti_clock_dev ti_omap4_clk_devmap[] = {
|
|
|
|
/* System clocks */
|
|
{ .id = SYS_CLK,
|
|
.clk_activate = NULL,
|
|
.clk_deactivate = NULL,
|
|
.clk_set_source = NULL,
|
|
.clk_accessible = NULL,
|
|
.clk_get_source_freq = omap4_clk_get_sysclk_freq,
|
|
.clk_set_source_freq = NULL,
|
|
},
|
|
/* MPU (ARM) core clocks */
|
|
{ .id = MPU_CLK,
|
|
.clk_activate = NULL,
|
|
.clk_deactivate = NULL,
|
|
.clk_set_source = NULL,
|
|
.clk_accessible = NULL,
|
|
.clk_get_source_freq = omap4_clk_get_arm_fclk_freq,
|
|
.clk_set_source_freq = NULL,
|
|
},
|
|
|
|
|
|
/* UART device clocks */
|
|
OMAP4_GENERIC_CLOCK_DEV(UART1_CLK),
|
|
OMAP4_GENERIC_CLOCK_DEV(UART2_CLK),
|
|
OMAP4_GENERIC_CLOCK_DEV(UART3_CLK),
|
|
OMAP4_GENERIC_CLOCK_DEV(UART4_CLK),
|
|
|
|
/* Timer device source clocks */
|
|
OMAP4_GPTIMER_CLOCK_DEV(TIMER1_CLK),
|
|
OMAP4_GPTIMER_CLOCK_DEV(TIMER2_CLK),
|
|
OMAP4_GPTIMER_CLOCK_DEV(TIMER3_CLK),
|
|
OMAP4_GPTIMER_CLOCK_DEV(TIMER4_CLK),
|
|
OMAP4_GPTIMER_CLOCK_DEV(TIMER5_CLK),
|
|
OMAP4_GPTIMER_CLOCK_DEV(TIMER6_CLK),
|
|
OMAP4_GPTIMER_CLOCK_DEV(TIMER7_CLK),
|
|
OMAP4_GPTIMER_CLOCK_DEV(TIMER8_CLK),
|
|
OMAP4_GPTIMER_CLOCK_DEV(TIMER9_CLK),
|
|
OMAP4_GPTIMER_CLOCK_DEV(TIMER10_CLK),
|
|
OMAP4_GPTIMER_CLOCK_DEV(TIMER11_CLK),
|
|
|
|
/* MMC device clocks (MMC1 and MMC2 can have different input clocks) */
|
|
OMAP4_HSMMC_CLOCK_DEV(MMC1_CLK),
|
|
OMAP4_HSMMC_CLOCK_DEV(MMC2_CLK),
|
|
OMAP4_GENERIC_CLOCK_DEV(MMC3_CLK),
|
|
OMAP4_GENERIC_CLOCK_DEV(MMC4_CLK),
|
|
OMAP4_GENERIC_CLOCK_DEV(MMC5_CLK),
|
|
|
|
/* USB HS (high speed TLL, EHCI and OHCI) */
|
|
OMAP4_HSUSBHOST_CLOCK_DEV(USBTLL_CLK),
|
|
OMAP4_HSUSBHOST_CLOCK_DEV(USBHSHOST_CLK),
|
|
OMAP4_HSUSBHOST_CLOCK_DEV(USBFSHOST_CLK),
|
|
OMAP4_HSUSBHOST_CLOCK_DEV(USBP1_PHY_CLK),
|
|
OMAP4_HSUSBHOST_CLOCK_DEV(USBP2_PHY_CLK),
|
|
OMAP4_HSUSBHOST_CLOCK_DEV(USBP1_UTMI_CLK),
|
|
OMAP4_HSUSBHOST_CLOCK_DEV(USBP2_UTMI_CLK),
|
|
OMAP4_HSUSBHOST_CLOCK_DEV(USBP1_HSIC_CLK),
|
|
OMAP4_HSUSBHOST_CLOCK_DEV(USBP2_HSIC_CLK),
|
|
|
|
/* GPIO */
|
|
OMAP4_GENERIC_CLOCK_DEV(GPIO1_CLK),
|
|
OMAP4_GENERIC_CLOCK_DEV(GPIO2_CLK),
|
|
OMAP4_GENERIC_CLOCK_DEV(GPIO3_CLK),
|
|
OMAP4_GENERIC_CLOCK_DEV(GPIO4_CLK),
|
|
OMAP4_GENERIC_CLOCK_DEV(GPIO5_CLK),
|
|
OMAP4_GENERIC_CLOCK_DEV(GPIO6_CLK),
|
|
|
|
/* sDMA */
|
|
OMAP4_GENERIC_CLOCK_DEV(SDMA_CLK),
|
|
|
|
/* I2C */
|
|
OMAP4_GENERIC_CLOCK_DEV(I2C1_CLK),
|
|
OMAP4_GENERIC_CLOCK_DEV(I2C2_CLK),
|
|
OMAP4_GENERIC_CLOCK_DEV(I2C3_CLK),
|
|
OMAP4_GENERIC_CLOCK_DEV(I2C4_CLK),
|
|
|
|
{ INVALID_CLK_IDENT, NULL, NULL, NULL, NULL }
|
|
};
|
|
|
|
/**
|
|
* omap4_clk_details - Stores details for all the different clocks supported
|
|
*
|
|
* Whenever an operation on a clock is being performed (activated, deactivated,
|
|
* etc) this array is looked up to find the correct register and bit(s) we
|
|
* should be modifying.
|
|
*
|
|
*/
|
|
struct omap4_clk_details {
|
|
clk_ident_t id;
|
|
|
|
uint32_t instance;
|
|
uint32_t clksel_reg;
|
|
|
|
int32_t src_freq;
|
|
|
|
uint32_t enable_mode;
|
|
};
|
|
|
|
#define OMAP4_GENERIC_CLOCK_DETAILS(i, f, di, r, e) \
|
|
{ .id = (i), \
|
|
.instance = (di), \
|
|
.clksel_reg = (r), \
|
|
.src_freq = (f), \
|
|
.enable_mode = (e), \
|
|
}
|
|
|
|
static struct omap4_clk_details g_omap4_clk_details[] = {
|
|
|
|
/* UART */
|
|
OMAP4_GENERIC_CLOCK_DETAILS(UART1_CLK, FREQ_48MHZ, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x0140), CLKCTRL_MODULEMODE_ENABLE),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(UART2_CLK, FREQ_48MHZ, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x0148), CLKCTRL_MODULEMODE_ENABLE),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(UART3_CLK, FREQ_48MHZ, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x0150), CLKCTRL_MODULEMODE_ENABLE),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(UART4_CLK, FREQ_48MHZ, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x0158), CLKCTRL_MODULEMODE_ENABLE),
|
|
|
|
/* General purpose timers */
|
|
OMAP4_GENERIC_CLOCK_DETAILS(TIMER1_CLK, -1, PRM_INSTANCE,
|
|
(WKUP_CM_OFFSET + 0x040), CLKCTRL_MODULEMODE_ENABLE),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(TIMER2_CLK, -1, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x038), CLKCTRL_MODULEMODE_ENABLE),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(TIMER3_CLK, -1, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x040), CLKCTRL_MODULEMODE_ENABLE),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(TIMER4_CLK, -1, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x048), CLKCTRL_MODULEMODE_ENABLE),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(TIMER5_CLK, -1, CM1_INSTANCE,
|
|
(ABE_CM1_OFFSET + 0x068), CLKCTRL_MODULEMODE_ENABLE),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(TIMER6_CLK, -1, CM1_INSTANCE,
|
|
(ABE_CM1_OFFSET + 0x070), CLKCTRL_MODULEMODE_ENABLE),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(TIMER7_CLK, -1, CM1_INSTANCE,
|
|
(ABE_CM1_OFFSET + 0x078), CLKCTRL_MODULEMODE_ENABLE),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(TIMER8_CLK, -1, CM1_INSTANCE,
|
|
(ABE_CM1_OFFSET + 0x080), CLKCTRL_MODULEMODE_ENABLE),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(TIMER9_CLK, -1, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x050), CLKCTRL_MODULEMODE_ENABLE),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(TIMER10_CLK, -1, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x028), CLKCTRL_MODULEMODE_ENABLE),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(TIMER11_CLK, -1, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x030), CLKCTRL_MODULEMODE_ENABLE),
|
|
|
|
/* HSMMC (MMC1 and MMC2 can have different input clocks) */
|
|
OMAP4_GENERIC_CLOCK_DETAILS(MMC1_CLK, -1, CM2_INSTANCE,
|
|
(L3INIT_CM2_OFFSET + 0x028), /*CLKCTRL_MODULEMODE_ENABLE*/2),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(MMC2_CLK, -1, CM2_INSTANCE,
|
|
(L3INIT_CM2_OFFSET + 0x030), /*CLKCTRL_MODULEMODE_ENABLE*/2),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(MMC3_CLK, FREQ_48MHZ, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x120), /*CLKCTRL_MODULEMODE_ENABLE*/2),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(MMC4_CLK, FREQ_48MHZ, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x128), /*CLKCTRL_MODULEMODE_ENABLE*/2),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(MMC5_CLK, FREQ_48MHZ, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x160), /*CLKCTRL_MODULEMODE_ENABLE*/1),
|
|
|
|
/* GPIO modules */
|
|
OMAP4_GENERIC_CLOCK_DETAILS(GPIO1_CLK, -1, PRM_INSTANCE,
|
|
(WKUP_CM_OFFSET + 0x038), CLKCTRL_MODULEMODE_AUTO),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(GPIO2_CLK, -1, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x060), CLKCTRL_MODULEMODE_AUTO),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(GPIO3_CLK, -1, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x068), CLKCTRL_MODULEMODE_AUTO),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(GPIO4_CLK, -1, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x070), CLKCTRL_MODULEMODE_AUTO),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(GPIO5_CLK, -1, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x078), CLKCTRL_MODULEMODE_AUTO),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(GPIO6_CLK, -1, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x080), CLKCTRL_MODULEMODE_AUTO),
|
|
|
|
/* sDMA block */
|
|
OMAP4_GENERIC_CLOCK_DETAILS(SDMA_CLK, -1, CM2_INSTANCE,
|
|
(CORE_CM2_OFFSET + 0x300), CLKCTRL_MODULEMODE_AUTO),
|
|
|
|
/* I2C modules */
|
|
OMAP4_GENERIC_CLOCK_DETAILS(I2C1_CLK, -1, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x0A0), CLKCTRL_MODULEMODE_ENABLE),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(I2C2_CLK, -1, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x0A8), CLKCTRL_MODULEMODE_ENABLE),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(I2C3_CLK, -1, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x0B0), CLKCTRL_MODULEMODE_ENABLE),
|
|
OMAP4_GENERIC_CLOCK_DETAILS(I2C4_CLK, -1, CM2_INSTANCE,
|
|
(L4PER_CM2_OFFSET + 0x0B8), CLKCTRL_MODULEMODE_ENABLE),
|
|
|
|
{ INVALID_CLK_IDENT, 0, 0, 0, 0 },
|
|
};
|
|
|
|
/**
|
|
* MAX_MODULE_ENABLE_WAIT - the number of loops to wait for the module to come
|
|
* alive.
|
|
*
|
|
*/
|
|
#define MAX_MODULE_ENABLE_WAIT 100
|
|
|
|
/**
|
|
* ARRAY_SIZE - Macro to return the number of elements in a static const array.
|
|
*
|
|
*/
|
|
#define ARRAY_SIZE(x) (sizeof(x)/sizeof(x[0]))
|
|
|
|
/**
|
|
* omap4_clk_details - writes a 32-bit value to one of the timer registers
|
|
* @timer: Timer device context
|
|
* @off: The offset of a register from the timer register address range
|
|
* @val: The value to write into the register
|
|
*
|
|
*
|
|
* RETURNS:
|
|
* nothing
|
|
*/
|
|
static struct omap4_clk_details*
|
|
omap4_clk_details(clk_ident_t id)
|
|
{
|
|
struct omap4_clk_details *walker;
|
|
|
|
for (walker = g_omap4_clk_details; walker->id != INVALID_CLK_IDENT; walker++) {
|
|
if (id == walker->id)
|
|
return (walker);
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static struct omap4_prcm_softc *
|
|
omap4_prcm_get_instance_softc(int module_instance)
|
|
{
|
|
int i, maxunit;
|
|
devclass_t prcm_devclass;
|
|
device_t dev;
|
|
struct omap4_prcm_softc *sc;
|
|
|
|
prcm_devclass = devclass_find("omap4_prcm");
|
|
maxunit = devclass_get_maxunit(prcm_devclass);
|
|
|
|
for (i = 0; i < maxunit; i++) {
|
|
dev = devclass_get_device(prcm_devclass, i);
|
|
sc = device_get_softc(dev);
|
|
if (sc->sc_instance == module_instance)
|
|
return (sc);
|
|
}
|
|
|
|
return (NULL);
|
|
}
|
|
|
|
/**
|
|
* omap4_clk_generic_activate - checks if a module is accessible
|
|
* @module: identifier for the module to check, see omap3_prcm.h for a list
|
|
* of possible modules.
|
|
* Example: OMAP3_MODULE_MMC1
|
|
*
|
|
*
|
|
*
|
|
* LOCKING:
|
|
* Inherits the locks from the omap_prcm driver, no internal locking.
|
|
*
|
|
* RETURNS:
|
|
* Returns 0 on success or a positive error code on failure.
|
|
*/
|
|
static int
|
|
omap4_clk_generic_activate(struct ti_clock_dev *clkdev)
|
|
{
|
|
struct omap4_prcm_softc *sc;
|
|
struct omap4_clk_details* clk_details;
|
|
struct resource* clk_mem_res;
|
|
uint32_t clksel;
|
|
unsigned int i;
|
|
clk_details = omap4_clk_details(clkdev->id);
|
|
|
|
if (clk_details == NULL)
|
|
return (ENXIO);
|
|
|
|
sc = omap4_prcm_get_instance_softc(clk_details->instance);
|
|
if (sc == NULL)
|
|
return ENXIO;
|
|
|
|
clk_mem_res = sc->sc_res;
|
|
|
|
if (clk_mem_res == NULL)
|
|
return (EINVAL);
|
|
|
|
/* All the 'generic' clocks have a CLKCTRL register which is more or less
|
|
* generic - the have at least two fielda called MODULEMODE and IDLEST.
|
|
*/
|
|
clksel = bus_read_4(clk_mem_res, clk_details->clksel_reg);
|
|
clksel &= ~CLKCTRL_MODULEMODE_MASK;
|
|
clksel |= clk_details->enable_mode;
|
|
bus_write_4(clk_mem_res, clk_details->clksel_reg, clksel);
|
|
|
|
/* Now poll on the IDLEST register to tell us if the module has come up.
|
|
* TODO: We need to take into account the parent clocks.
|
|
*/
|
|
|
|
/* Try MAX_MODULE_ENABLE_WAIT number of times to check if enabled */
|
|
for (i = 0; i < MAX_MODULE_ENABLE_WAIT; i++) {
|
|
clksel = bus_read_4(clk_mem_res, clk_details->clksel_reg);
|
|
if ((clksel & CLKCTRL_IDLEST_MASK) == CLKCTRL_IDLEST_ENABLED)
|
|
break;
|
|
DELAY(10);
|
|
}
|
|
|
|
/* Check the enabled state */
|
|
if ((clksel & CLKCTRL_IDLEST_MASK) != CLKCTRL_IDLEST_ENABLED) {
|
|
printf("Error: failed to enable module with clock %d\n", clkdev->id);
|
|
printf("Error: 0x%08x => 0x%08x\n", clk_details->clksel_reg, clksel);
|
|
return (ETIMEDOUT);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/**
|
|
* omap4_clk_generic_deactivate - checks if a module is accessible
|
|
* @module: identifier for the module to check, see omap3_prcm.h for a list
|
|
* of possible modules.
|
|
* Example: OMAP3_MODULE_MMC1
|
|
*
|
|
*
|
|
*
|
|
* LOCKING:
|
|
* Inherits the locks from the omap_prcm driver, no internal locking.
|
|
*
|
|
* RETURNS:
|
|
* Returns 0 on success or a positive error code on failure.
|
|
*/
|
|
static int
|
|
omap4_clk_generic_deactivate(struct ti_clock_dev *clkdev)
|
|
{
|
|
struct omap4_prcm_softc *sc;
|
|
struct omap4_clk_details* clk_details;
|
|
struct resource* clk_mem_res;
|
|
uint32_t clksel;
|
|
|
|
clk_details = omap4_clk_details(clkdev->id);
|
|
|
|
if (clk_details == NULL)
|
|
return (ENXIO);
|
|
|
|
sc = omap4_prcm_get_instance_softc(clk_details->instance);
|
|
if (sc == NULL)
|
|
return ENXIO;
|
|
|
|
clk_mem_res = sc->sc_res;
|
|
|
|
if (clk_mem_res == NULL)
|
|
return (EINVAL);
|
|
|
|
/* All the 'generic' clocks have a CLKCTRL register which is more or less
|
|
* generic - the have at least two fielda called MODULEMODE and IDLEST.
|
|
*/
|
|
clksel = bus_read_4(clk_mem_res, clk_details->clksel_reg);
|
|
clksel &= ~CLKCTRL_MODULEMODE_MASK;
|
|
clksel |= CLKCTRL_MODULEMODE_DISABLE;
|
|
bus_write_4(clk_mem_res, clk_details->clksel_reg, clksel);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/**
|
|
* omap4_clk_generic_set_source - checks if a module is accessible
|
|
* @module: identifier for the module to check, see omap3_prcm.h for a list
|
|
* of possible modules.
|
|
* Example: OMAP3_MODULE_MMC1
|
|
*
|
|
*
|
|
*
|
|
* LOCKING:
|
|
* Inherits the locks from the omap_prcm driver, no internal locking.
|
|
*
|
|
* RETURNS:
|
|
* Returns 0 on success or a positive error code on failure.
|
|
*/
|
|
static int
|
|
omap4_clk_generic_set_source(struct ti_clock_dev *clkdev,
|
|
clk_src_t clksrc)
|
|
{
|
|
|
|
return (0);
|
|
}
|
|
|
|
/**
|
|
* omap4_clk_generic_accessible - checks if a module is accessible
|
|
* @module: identifier for the module to check, see omap3_prcm.h for a list
|
|
* of possible modules.
|
|
* Example: OMAP3_MODULE_MMC1
|
|
*
|
|
*
|
|
*
|
|
* LOCKING:
|
|
* Inherits the locks from the omap_prcm driver, no internal locking.
|
|
*
|
|
* RETURNS:
|
|
* Returns 0 on success or a negative error code on failure.
|
|
*/
|
|
static int
|
|
omap4_clk_generic_accessible(struct ti_clock_dev *clkdev)
|
|
{
|
|
struct omap4_prcm_softc *sc;
|
|
struct omap4_clk_details* clk_details;
|
|
struct resource* clk_mem_res;
|
|
uint32_t clksel;
|
|
|
|
clk_details = omap4_clk_details(clkdev->id);
|
|
|
|
if (clk_details == NULL)
|
|
return (ENXIO);
|
|
|
|
sc = omap4_prcm_get_instance_softc(clk_details->instance);
|
|
if (sc == NULL)
|
|
return ENXIO;
|
|
|
|
clk_mem_res = sc->sc_res;
|
|
|
|
if (clk_mem_res == NULL)
|
|
return (EINVAL);
|
|
|
|
clksel = bus_read_4(clk_mem_res, clk_details->clksel_reg);
|
|
|
|
/* Check the enabled state */
|
|
if ((clksel & CLKCTRL_IDLEST_MASK) != CLKCTRL_IDLEST_ENABLED)
|
|
return (0);
|
|
|
|
return (1);
|
|
}
|
|
|
|
/**
|
|
* omap4_clk_generic_get_source_freq - checks if a module is accessible
|
|
* @module: identifier for the module to check, see omap3_prcm.h for a list
|
|
* of possible modules.
|
|
* Example: OMAP3_MODULE_MMC1
|
|
*
|
|
*
|
|
*
|
|
* LOCKING:
|
|
* Inherits the locks from the omap_prcm driver, no internal locking.
|
|
*
|
|
* RETURNS:
|
|
* Returns 0 on success or a negative error code on failure.
|
|
*/
|
|
static int
|
|
omap4_clk_generic_get_source_freq(struct ti_clock_dev *clkdev,
|
|
unsigned int *freq
|
|
)
|
|
{
|
|
struct omap4_clk_details* clk_details = omap4_clk_details(clkdev->id);
|
|
|
|
if (clk_details == NULL)
|
|
return (ENXIO);
|
|
|
|
/* Simply return the stored frequency */
|
|
if (freq)
|
|
*freq = (unsigned int)clk_details->src_freq;
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
/**
|
|
* omap4_clk_gptimer_set_source - checks if a module is accessible
|
|
* @module: identifier for the module to check, see omap3_prcm.h for a list
|
|
* of possible modules.
|
|
* Example: OMAP3_MODULE_MMC1
|
|
*
|
|
*
|
|
*
|
|
* LOCKING:
|
|
* Inherits the locks from the omap_prcm driver, no internal locking.
|
|
*
|
|
* RETURNS:
|
|
* Returns 0 on success or a negative error code on failure.
|
|
*/
|
|
static int
|
|
omap4_clk_gptimer_set_source(struct ti_clock_dev *clkdev,
|
|
clk_src_t clksrc)
|
|
{
|
|
struct omap4_prcm_softc *sc;
|
|
struct omap4_clk_details* clk_details;
|
|
struct resource* clk_mem_res;
|
|
|
|
clk_details = omap4_clk_details(clkdev->id);
|
|
|
|
if (clk_details == NULL)
|
|
return (ENXIO);
|
|
|
|
sc = omap4_prcm_get_instance_softc(clk_details->instance);
|
|
if (sc == NULL)
|
|
return ENXIO;
|
|
|
|
clk_mem_res = sc->sc_res;
|
|
|
|
if (clk_mem_res == NULL)
|
|
return (EINVAL);
|
|
|
|
/* TODO: Implement */
|
|
|
|
return (0);
|
|
}
|
|
|
|
/**
|
|
* omap4_clk_gptimer_get_source_freq - checks if a module is accessible
|
|
* @module: identifier for the module to check, see omap3_prcm.h for a list
|
|
* of possible modules.
|
|
* Example: OMAP3_MODULE_MMC1
|
|
*
|
|
*
|
|
*
|
|
* LOCKING:
|
|
* Inherits the locks from the omap_prcm driver, no internal locking.
|
|
*
|
|
* RETURNS:
|
|
* Returns 0 on success or a negative error code on failure.
|
|
*/
|
|
static int
|
|
omap4_clk_gptimer_get_source_freq(struct ti_clock_dev *clkdev,
|
|
unsigned int *freq
|
|
)
|
|
{
|
|
struct omap4_prcm_softc *sc;
|
|
struct omap4_clk_details* clk_details;
|
|
struct resource* clk_mem_res;
|
|
uint32_t clksel;
|
|
unsigned int src_freq;
|
|
|
|
clk_details = omap4_clk_details(clkdev->id);
|
|
|
|
if (clk_details == NULL)
|
|
return (ENXIO);
|
|
|
|
sc = omap4_prcm_get_instance_softc(clk_details->instance);
|
|
if (sc == NULL)
|
|
return ENXIO;
|
|
|
|
clk_mem_res = sc->sc_res;
|
|
|
|
if (clk_mem_res == NULL)
|
|
return (EINVAL);
|
|
|
|
/* Need to read the CLKSEL field to determine the clock source */
|
|
clksel = bus_read_4(clk_mem_res, clk_details->clksel_reg);
|
|
if (clksel & (0x1UL << 24))
|
|
src_freq = FREQ_32KHZ;
|
|
else
|
|
omap4_clk_get_sysclk_freq(NULL, &src_freq);
|
|
|
|
/* Return the frequency */
|
|
if (freq)
|
|
*freq = src_freq;
|
|
|
|
return (0);
|
|
}
|
|
|
|
/**
|
|
* omap4_clk_hsmmc_set_source - sets the source clock (freq)
|
|
* @clkdev: pointer to the clockdev structure (id field will contain clock id)
|
|
*
|
|
* The MMC 1 and 2 clocks can be source from either a 64MHz or 96MHz clock.
|
|
*
|
|
* LOCKING:
|
|
* Inherits the locks from the omap_prcm driver, no internal locking.
|
|
*
|
|
* RETURNS:
|
|
* Returns 0 on success or a negative error code on failure.
|
|
*/
|
|
static int
|
|
omap4_clk_hsmmc_set_source(struct ti_clock_dev *clkdev,
|
|
clk_src_t clksrc)
|
|
{
|
|
struct omap4_prcm_softc *sc;
|
|
struct omap4_clk_details* clk_details;
|
|
struct resource* clk_mem_res;
|
|
uint32_t clksel;
|
|
|
|
clk_details = omap4_clk_details(clkdev->id);
|
|
|
|
if (clk_details == NULL)
|
|
return (ENXIO);
|
|
|
|
|
|
sc = omap4_prcm_get_instance_softc(clk_details->instance);
|
|
if (sc == NULL)
|
|
return ENXIO;
|
|
|
|
clk_mem_res = sc->sc_res;
|
|
|
|
if (clk_mem_res == NULL)
|
|
return (EINVAL);
|
|
|
|
/* For MMC modules 3, 4 & 5 you can't change the freq, it's always 48MHz */
|
|
if ((clkdev->id == MMC3_CLK) || (clkdev->id == MMC4_CLK) ||
|
|
(clkdev->id == MMC5_CLK)) {
|
|
if (clksrc != F48MHZ_CLK)
|
|
return (EINVAL);
|
|
return 0;
|
|
}
|
|
|
|
|
|
clksel = bus_read_4(clk_mem_res, clk_details->clksel_reg);
|
|
|
|
/* Bit 24 is set if 96MHz clock or cleared for 64MHz clock */
|
|
if (clksrc == F64MHZ_CLK)
|
|
clksel &= ~(0x1UL << 24);
|
|
else if (clksrc == F96MHZ_CLK)
|
|
clksel |= (0x1UL << 24);
|
|
else
|
|
return (EINVAL);
|
|
|
|
bus_write_4(clk_mem_res, clk_details->clksel_reg, clksel);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/**
|
|
* omap4_clk_hsmmc_get_source_freq - checks if a module is accessible
|
|
* @clkdev: pointer to the clockdev structure (id field will contain clock id)
|
|
*
|
|
*
|
|
*
|
|
* LOCKING:
|
|
* Inherits the locks from the omap_prcm driver, no internal locking.
|
|
*
|
|
* RETURNS:
|
|
* Returns 0 on success or a negative error code on failure.
|
|
*/
|
|
static int
|
|
omap4_clk_hsmmc_get_source_freq(struct ti_clock_dev *clkdev,
|
|
unsigned int *freq
|
|
)
|
|
{
|
|
struct omap4_prcm_softc *sc;
|
|
struct omap4_clk_details* clk_details;
|
|
struct resource* clk_mem_res;
|
|
uint32_t clksel;
|
|
unsigned int src_freq;
|
|
|
|
clk_details = omap4_clk_details(clkdev->id);
|
|
|
|
if (clk_details == NULL)
|
|
return (ENXIO);
|
|
|
|
sc = omap4_prcm_get_instance_softc(clk_details->instance);
|
|
if (sc == NULL)
|
|
return ENXIO;
|
|
|
|
clk_mem_res = sc->sc_res;
|
|
|
|
if (clk_mem_res == NULL)
|
|
return (EINVAL);
|
|
|
|
switch (clkdev->id) {
|
|
case MMC1_CLK:
|
|
case MMC2_CLK:
|
|
/* Need to read the CLKSEL field to determine the clock source */
|
|
clksel = bus_read_4(clk_mem_res, clk_details->clksel_reg);
|
|
if (clksel & (0x1UL << 24))
|
|
src_freq = FREQ_96MHZ;
|
|
else
|
|
src_freq = FREQ_64MHZ;
|
|
break;
|
|
case MMC3_CLK:
|
|
case MMC4_CLK:
|
|
case MMC5_CLK:
|
|
src_freq = FREQ_48MHZ;
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
|
|
/* Return the frequency */
|
|
if (freq)
|
|
*freq = src_freq;
|
|
|
|
return (0);
|
|
}
|
|
|
|
/**
|
|
* omap4_clk_get_sysclk_freq - gets the sysclk frequency
|
|
* @sc: pointer to the clk module/device context
|
|
*
|
|
* Read the clocking information from the power-control/boot-strap registers,
|
|
* and stored in two global variables.
|
|
*
|
|
* RETURNS:
|
|
* nothing, values are saved in global variables
|
|
*/
|
|
static int
|
|
omap4_clk_get_sysclk_freq(struct ti_clock_dev *clkdev,
|
|
unsigned int *freq)
|
|
{
|
|
uint32_t clksel;
|
|
uint32_t sysclk;
|
|
struct omap4_prcm_softc *sc;
|
|
|
|
sc = omap4_prcm_get_instance_softc(PRM_INSTANCE);
|
|
if (sc == NULL)
|
|
return ENXIO;
|
|
|
|
/* Read the input clock freq from the configuration register (CM_SYS_CLKSEL) */
|
|
clksel = bus_read_4(sc->sc_res, CM_SYS_CLKSEL_OFFSET);
|
|
switch (clksel & 0x7) {
|
|
case 0x1:
|
|
/* 12Mhz */
|
|
sysclk = 12000000;
|
|
break;
|
|
case 0x3:
|
|
/* 16.8Mhz */
|
|
sysclk = 16800000;
|
|
break;
|
|
case 0x4:
|
|
/* 19.2Mhz */
|
|
sysclk = 19200000;
|
|
break;
|
|
case 0x5:
|
|
/* 26Mhz */
|
|
sysclk = 26000000;
|
|
break;
|
|
case 0x7:
|
|
/* 38.4Mhz */
|
|
sysclk = 38400000;
|
|
break;
|
|
default:
|
|
panic("%s: Invalid clock freq", __func__);
|
|
}
|
|
|
|
/* Return the value */
|
|
if (freq)
|
|
*freq = sysclk;
|
|
|
|
return (0);
|
|
}
|
|
|
|
/**
|
|
* omap4_clk_get_arm_fclk_freq - gets the MPU clock frequency
|
|
* @clkdev: ignored
|
|
* @freq: pointer which upon return will contain the freq in hz
|
|
* @mem_res: array of allocated memory resources
|
|
*
|
|
* Reads the frequency setting information registers and returns the value
|
|
* in the freq variable.
|
|
*
|
|
* RETURNS:
|
|
* returns 0 on success, a positive error code on failure.
|
|
*/
|
|
static int
|
|
omap4_clk_get_arm_fclk_freq(struct ti_clock_dev *clkdev,
|
|
unsigned int *freq)
|
|
{
|
|
uint32_t clksel;
|
|
uint32_t pll_mult, pll_div;
|
|
uint32_t mpuclk, sysclk;
|
|
struct omap4_prcm_softc *sc;
|
|
|
|
sc = omap4_prcm_get_instance_softc(CM1_INSTANCE);
|
|
if (sc == NULL)
|
|
return ENXIO;
|
|
|
|
/* Read the clksel register which contains the DPLL multiple and divide
|
|
* values. These are applied to the sysclk.
|
|
*/
|
|
clksel = bus_read_4(sc->sc_res, CM_CLKSEL_DPLL_MPU);
|
|
|
|
pll_mult = ((clksel >> 8) & 0x7ff);
|
|
pll_div = (clksel & 0x7f) + 1;
|
|
|
|
|
|
/* Get the system clock freq */
|
|
omap4_clk_get_sysclk_freq(NULL, &sysclk);
|
|
|
|
|
|
/* Calculate the MPU freq */
|
|
mpuclk = ((uint64_t)sysclk * pll_mult) / pll_div;
|
|
|
|
/* Return the value */
|
|
if (freq)
|
|
*freq = mpuclk;
|
|
|
|
return (0);
|
|
}
|
|
|
|
/**
|
|
* omap4_clk_hsusbhost_activate - activates the USB clocks for the given module
|
|
* @clkdev: pointer to the clock device structure.
|
|
* @mem_res: array of memory resources allocated by the top level PRCM driver.
|
|
*
|
|
* The USB clocking setup seems to be a bit more tricky than the other modules,
|
|
* to start with the clocking diagram for the HS host module shows 13 different
|
|
* clocks. So to try and make it easier to follow the clocking activation
|
|
* and deactivation is handled in its own set of callbacks.
|
|
*
|
|
* LOCKING:
|
|
* Inherits the locks from the omap_prcm driver, no internal locking.
|
|
*
|
|
* RETURNS:
|
|
* Returns 0 on success or a positive error code on failure.
|
|
*/
|
|
|
|
struct dpll_param {
|
|
unsigned int m;
|
|
unsigned int n;
|
|
unsigned int m2;
|
|
unsigned int m3;
|
|
unsigned int m4;
|
|
unsigned int m5;
|
|
unsigned int m6;
|
|
unsigned int m7;
|
|
};
|
|
/* USB parameters */
|
|
struct dpll_param usb_dpll_param[7] = {
|
|
/* 12M values */
|
|
{0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
|
|
/* 13M values */
|
|
{0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
|
|
/* 16.8M values */
|
|
{0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
|
|
/* 19.2M values */
|
|
{0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
|
|
/* 26M values */
|
|
{0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
|
|
/* 27M values */
|
|
{0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0},
|
|
/* 38.4M values */
|
|
#ifdef CONFIG_OMAP4_SDC
|
|
{0x32, 0x1, 0x2, 0x0, 0x0, 0x0, 0x0, 0x0},
|
|
#else
|
|
{0x32, 0x1, 0x2, 0x0, 0x0, 0x0, 0x0, 0x0},
|
|
#endif
|
|
};
|
|
static int
|
|
omap4_clk_hsusbhost_activate(struct ti_clock_dev *clkdev)
|
|
{
|
|
struct omap4_prcm_softc *sc;
|
|
struct resource* clk_mem_res;
|
|
uint32_t clksel_reg_off;
|
|
uint32_t clksel;
|
|
unsigned int i;
|
|
|
|
sc = omap4_prcm_get_instance_softc(CM2_INSTANCE);
|
|
if (sc == NULL)
|
|
return ENXIO;
|
|
|
|
switch (clkdev->id) {
|
|
case USBTLL_CLK:
|
|
/* For the USBTLL module we need to enable the following clocks:
|
|
* - INIT_L4_ICLK (will be enabled by bootloader)
|
|
* - TLL_CH0_FCLK
|
|
* - TLL_CH1_FCLK
|
|
*/
|
|
|
|
/* We need the CM_L3INIT_HSUSBTLL_CLKCTRL register in CM2 register set */
|
|
clk_mem_res = sc->sc_res;
|
|
clksel_reg_off = L3INIT_CM2_OFFSET + 0x68;
|
|
|
|
/* Enable the module and also enable the optional func clocks for
|
|
* channels 0 & 1 (is this needed ?)
|
|
*/
|
|
clksel = bus_read_4(clk_mem_res, clksel_reg_off);
|
|
clksel &= ~CLKCTRL_MODULEMODE_MASK;
|
|
clksel |= CLKCTRL_MODULEMODE_ENABLE;
|
|
|
|
clksel |= (0x1 << 8); /* USB-HOST optional clock: USB_CH0_CLK */
|
|
clksel |= (0x1 << 9); /* USB-HOST optional clock: USB_CH1_CLK */
|
|
break;
|
|
|
|
case USBHSHOST_CLK:
|
|
case USBP1_PHY_CLK:
|
|
case USBP2_PHY_CLK:
|
|
case USBP1_UTMI_CLK:
|
|
case USBP2_UTMI_CLK:
|
|
case USBP1_HSIC_CLK:
|
|
case USBP2_HSIC_CLK:
|
|
/* For the USB HS HOST module we need to enable the following clocks:
|
|
* - INIT_L4_ICLK (will be enabled by bootloader)
|
|
* - INIT_L3_ICLK (will be enabled by bootloader)
|
|
* - INIT_48MC_FCLK
|
|
* - UTMI_ROOT_GFCLK (UTMI only, create a new clock for that ?)
|
|
* - UTMI_P1_FCLK (UTMI only, create a new clock for that ?)
|
|
* - UTMI_P2_FCLK (UTMI only, create a new clock for that ?)
|
|
* - HSIC_P1_60 (HSIC only, create a new clock for that ?)
|
|
* - HSIC_P1_480 (HSIC only, create a new clock for that ?)
|
|
* - HSIC_P2_60 (HSIC only, create a new clock for that ?)
|
|
* - HSIC_P2_480 (HSIC only, create a new clock for that ?)
|
|
*/
|
|
|
|
/* We need the CM_L3INIT_HSUSBHOST_CLKCTRL register in CM2 register set */
|
|
clk_mem_res = sc->sc_res;
|
|
clksel_reg_off = L3INIT_CM2_OFFSET + 0x58;
|
|
clksel = bus_read_4(clk_mem_res, clksel_reg_off);
|
|
/* Enable the module and also enable the optional func clocks */
|
|
if (clkdev->id == USBHSHOST_CLK) {
|
|
clksel &= ~CLKCTRL_MODULEMODE_MASK;
|
|
clksel |= /*CLKCTRL_MODULEMODE_ENABLE*/2;
|
|
|
|
clksel |= (0x1 << 15); /* USB-HOST clock control: FUNC48MCLK */
|
|
}
|
|
|
|
else if (clkdev->id == USBP1_UTMI_CLK)
|
|
clksel |= (0x1 << 8); /* UTMI_P1_CLK */
|
|
else if (clkdev->id == USBP2_UTMI_CLK)
|
|
clksel |= (0x1 << 9); /* UTMI_P2_CLK */
|
|
|
|
else if (clkdev->id == USBP1_HSIC_CLK)
|
|
clksel |= (0x5 << 11); /* HSIC60M_P1_CLK + HSIC480M_P1_CLK */
|
|
else if (clkdev->id == USBP2_HSIC_CLK)
|
|
clksel |= (0x5 << 12); /* HSIC60M_P2_CLK + HSIC480M_P2_CLK */
|
|
|
|
break;
|
|
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
|
|
bus_write_4(clk_mem_res, clksel_reg_off, clksel);
|
|
|
|
/* Try MAX_MODULE_ENABLE_WAIT number of times to check if enabled */
|
|
for (i = 0; i < MAX_MODULE_ENABLE_WAIT; i++) {
|
|
clksel = bus_read_4(clk_mem_res, clksel_reg_off);
|
|
if ((clksel & CLKCTRL_IDLEST_MASK) == CLKCTRL_IDLEST_ENABLED)
|
|
break;
|
|
}
|
|
|
|
/* Check the enabled state */
|
|
if ((clksel & CLKCTRL_IDLEST_MASK) != CLKCTRL_IDLEST_ENABLED) {
|
|
printf("Error: HERE failed to enable module with clock %d\n", clkdev->id);
|
|
printf("Error: 0x%08x => 0x%08x\n", clksel_reg_off, clksel);
|
|
return (ETIMEDOUT);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/**
|
|
* omap4_clk_generic_deactivate - checks if a module is accessible
|
|
* @clkdev: pointer to the clock device structure.
|
|
* @mem_res: array of memory resources allocated by the top level PRCM driver.
|
|
*
|
|
*
|
|
*
|
|
* LOCKING:
|
|
* Inherits the locks from the omap_prcm driver, no internal locking.
|
|
*
|
|
* RETURNS:
|
|
* Returns 0 on success or a positive error code on failure.
|
|
*/
|
|
static int
|
|
omap4_clk_hsusbhost_deactivate(struct ti_clock_dev *clkdev)
|
|
{
|
|
struct omap4_prcm_softc *sc;
|
|
struct resource* clk_mem_res;
|
|
uint32_t clksel_reg_off;
|
|
uint32_t clksel;
|
|
|
|
sc = omap4_prcm_get_instance_softc(CM2_INSTANCE);
|
|
if (sc == NULL)
|
|
return ENXIO;
|
|
|
|
switch (clkdev->id) {
|
|
case USBTLL_CLK:
|
|
/* We need the CM_L3INIT_HSUSBTLL_CLKCTRL register in CM2 register set */
|
|
clk_mem_res = sc->sc_res;
|
|
clksel_reg_off = L3INIT_CM2_OFFSET + 0x68;
|
|
|
|
clksel = bus_read_4(clk_mem_res, clksel_reg_off);
|
|
clksel &= ~CLKCTRL_MODULEMODE_MASK;
|
|
clksel |= CLKCTRL_MODULEMODE_DISABLE;
|
|
break;
|
|
|
|
case USBHSHOST_CLK:
|
|
case USBP1_PHY_CLK:
|
|
case USBP2_PHY_CLK:
|
|
case USBP1_UTMI_CLK:
|
|
case USBP2_UTMI_CLK:
|
|
case USBP1_HSIC_CLK:
|
|
case USBP2_HSIC_CLK:
|
|
/* For the USB HS HOST module we need to enable the following clocks:
|
|
* - INIT_L4_ICLK (will be enabled by bootloader)
|
|
* - INIT_L3_ICLK (will be enabled by bootloader)
|
|
* - INIT_48MC_FCLK
|
|
* - UTMI_ROOT_GFCLK (UTMI only, create a new clock for that ?)
|
|
* - UTMI_P1_FCLK (UTMI only, create a new clock for that ?)
|
|
* - UTMI_P2_FCLK (UTMI only, create a new clock for that ?)
|
|
* - HSIC_P1_60 (HSIC only, create a new clock for that ?)
|
|
* - HSIC_P1_480 (HSIC only, create a new clock for that ?)
|
|
* - HSIC_P2_60 (HSIC only, create a new clock for that ?)
|
|
* - HSIC_P2_480 (HSIC only, create a new clock for that ?)
|
|
*/
|
|
|
|
/* We need the CM_L3INIT_HSUSBHOST_CLKCTRL register in CM2 register set */
|
|
clk_mem_res = sc->sc_res;
|
|
clksel_reg_off = L3INIT_CM2_OFFSET + 0x58;
|
|
clksel = bus_read_4(clk_mem_res, clksel_reg_off);
|
|
|
|
/* Enable the module and also enable the optional func clocks */
|
|
if (clkdev->id == USBHSHOST_CLK) {
|
|
clksel &= ~CLKCTRL_MODULEMODE_MASK;
|
|
clksel |= CLKCTRL_MODULEMODE_DISABLE;
|
|
|
|
clksel &= ~(0x1 << 15); /* USB-HOST clock control: FUNC48MCLK */
|
|
}
|
|
|
|
else if (clkdev->id == USBP1_UTMI_CLK)
|
|
clksel &= ~(0x1 << 8); /* UTMI_P1_CLK */
|
|
else if (clkdev->id == USBP2_UTMI_CLK)
|
|
clksel &= ~(0x1 << 9); /* UTMI_P2_CLK */
|
|
|
|
else if (clkdev->id == USBP1_HSIC_CLK)
|
|
clksel &= ~(0x5 << 11); /* HSIC60M_P1_CLK + HSIC480M_P1_CLK */
|
|
else if (clkdev->id == USBP2_HSIC_CLK)
|
|
clksel &= ~(0x5 << 12); /* HSIC60M_P2_CLK + HSIC480M_P2_CLK */
|
|
|
|
break;
|
|
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
|
|
bus_write_4(clk_mem_res, clksel_reg_off, clksel);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/**
|
|
* omap4_clk_hsusbhost_accessible - checks if a module is accessible
|
|
* @clkdev: pointer to the clock device structure.
|
|
* @mem_res: array of memory resources allocated by the top level PRCM driver.
|
|
*
|
|
*
|
|
*
|
|
* LOCKING:
|
|
* Inherits the locks from the omap_prcm driver, no internal locking.
|
|
*
|
|
* RETURNS:
|
|
* Returns 0 if module is not enable, 1 if module is enabled or a negative
|
|
* error code on failure.
|
|
*/
|
|
static int
|
|
omap4_clk_hsusbhost_accessible(struct ti_clock_dev *clkdev)
|
|
{
|
|
struct omap4_prcm_softc *sc;
|
|
struct resource* clk_mem_res;
|
|
uint32_t clksel_reg_off;
|
|
uint32_t clksel;
|
|
|
|
sc = omap4_prcm_get_instance_softc(CM2_INSTANCE);
|
|
if (sc == NULL)
|
|
return ENXIO;
|
|
|
|
if (clkdev->id == USBTLL_CLK) {
|
|
/* We need the CM_L3INIT_HSUSBTLL_CLKCTRL register in CM2 register set */
|
|
clk_mem_res = sc->sc_res;
|
|
clksel_reg_off = L3INIT_CM2_OFFSET + 0x68;
|
|
}
|
|
else if (clkdev->id == USBHSHOST_CLK) {
|
|
/* We need the CM_L3INIT_HSUSBHOST_CLKCTRL register in CM2 register set */
|
|
clk_mem_res = sc->sc_res;
|
|
clksel_reg_off = L3INIT_CM2_OFFSET + 0x58;
|
|
}
|
|
else {
|
|
return (EINVAL);
|
|
}
|
|
|
|
clksel = bus_read_4(clk_mem_res, clksel_reg_off);
|
|
|
|
/* Check the enabled state */
|
|
if ((clksel & CLKCTRL_IDLEST_MASK) != CLKCTRL_IDLEST_ENABLED)
|
|
return (0);
|
|
|
|
return (1);
|
|
}
|
|
|
|
/**
|
|
* omap4_clk_hsusbhost_set_source - sets the source clocks
|
|
* @clkdev: pointer to the clock device structure.
|
|
* @clksrc: the clock source ID for the given clock.
|
|
* @mem_res: array of memory resources allocated by the top level PRCM driver.
|
|
*
|
|
*
|
|
*
|
|
* LOCKING:
|
|
* Inherits the locks from the omap_prcm driver, no internal locking.
|
|
*
|
|
* RETURNS:
|
|
* Returns 0 if successful otherwise a negative error code on failure.
|
|
*/
|
|
static int
|
|
omap4_clk_hsusbhost_set_source(struct ti_clock_dev *clkdev,
|
|
clk_src_t clksrc)
|
|
{
|
|
struct omap4_prcm_softc *sc;
|
|
struct resource* clk_mem_res;
|
|
uint32_t clksel_reg_off;
|
|
uint32_t clksel;
|
|
unsigned int bit;
|
|
|
|
sc = omap4_prcm_get_instance_softc(CM2_INSTANCE);
|
|
if (sc == NULL)
|
|
return ENXIO;
|
|
|
|
if (clkdev->id == USBP1_PHY_CLK)
|
|
bit = 24;
|
|
else if (clkdev->id != USBP2_PHY_CLK)
|
|
bit = 25;
|
|
else
|
|
return (EINVAL);
|
|
|
|
/* We need the CM_L3INIT_HSUSBHOST_CLKCTRL register in CM2 register set */
|
|
clk_mem_res = sc->sc_res;
|
|
clksel_reg_off = L3INIT_CM2_OFFSET + 0x58;
|
|
clksel = bus_read_4(clk_mem_res, clksel_reg_off);
|
|
|
|
/* Set the clock source to either external or internal */
|
|
if (clksrc == EXT_CLK)
|
|
clksel |= (0x1 << bit);
|
|
else
|
|
clksel &= ~(0x1 << bit);
|
|
|
|
bus_write_4(clk_mem_res, clksel_reg_off, clksel);
|
|
|
|
return (0);
|
|
}
|
|
|
|
#define PRM_RSTCTRL 0x1b00
|
|
#define PRM_RSTCTRL_RESET 0x2
|
|
|
|
static void
|
|
omap4_prcm_reset(void)
|
|
{
|
|
struct omap4_prcm_softc *sc;
|
|
|
|
sc = omap4_prcm_get_instance_softc(PRM_INSTANCE);
|
|
if (sc == NULL)
|
|
return;
|
|
|
|
bus_write_4(sc->sc_res, PRM_RSTCTRL,
|
|
bus_read_4(sc->sc_res, PRM_RSTCTRL) | PRM_RSTCTRL_RESET);
|
|
bus_read_4(sc->sc_res, PRM_RSTCTRL);
|
|
}
|
|
|
|
/**
|
|
* omap4_prcm_probe - probe function for the driver
|
|
* @dev: prcm device handle
|
|
*
|
|
* Simply sets the name of the driver module.
|
|
*
|
|
* LOCKING:
|
|
* None
|
|
*
|
|
* RETURNS:
|
|
* Always returns 0
|
|
*/
|
|
static int
|
|
omap4_prcm_probe(device_t dev)
|
|
{
|
|
const struct ofw_compat_data *ocd;
|
|
|
|
if (!ofw_bus_status_okay(dev))
|
|
return (ENXIO);
|
|
|
|
ocd = ofw_bus_search_compatible(dev, compat_data);
|
|
if ((int)ocd->ocd_data == 0)
|
|
return (ENXIO);
|
|
|
|
switch ((int)ocd->ocd_data) {
|
|
case PRM_INSTANCE:
|
|
device_set_desc(dev, "TI OMAP Power, Reset and Clock Management (PRM)");
|
|
break;
|
|
case CM1_INSTANCE:
|
|
device_set_desc(dev, "TI OMAP Power, Reset and Clock Management (C1)");
|
|
break;
|
|
case CM2_INSTANCE:
|
|
device_set_desc(dev, "TI OMAP Power, Reset and Clock Management (C2)");
|
|
break;
|
|
default:
|
|
device_printf(dev, "unknown instance type: %d\n", (int)ocd->ocd_data);
|
|
return (ENXIO);
|
|
}
|
|
|
|
return (BUS_PROBE_DEFAULT);
|
|
}
|
|
|
|
/**
|
|
* omap_prcm_attach - attach function for the driver
|
|
* @dev: prcm device handle
|
|
*
|
|
* Allocates and sets up the driver context, this simply entails creating a
|
|
* bus mappings for the PRCM register set.
|
|
*
|
|
* LOCKING:
|
|
* None
|
|
*
|
|
* RETURNS:
|
|
* Always returns 0
|
|
*/
|
|
|
|
extern uint32_t platform_arm_tmr_freq;
|
|
|
|
static int
|
|
omap4_prcm_attach(device_t dev)
|
|
{
|
|
struct omap4_prcm_softc *sc;
|
|
unsigned int freq;
|
|
const struct ofw_compat_data *ocd;
|
|
|
|
|
|
sc = device_get_softc(dev);
|
|
ocd = ofw_bus_search_compatible(dev, compat_data);
|
|
sc->sc_instance = (int)ocd->ocd_data;
|
|
|
|
sc->sc_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &sc->sc_rid,
|
|
RF_ACTIVE);
|
|
if (sc->sc_res == NULL) {
|
|
device_printf(dev, "could not allocate resources\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
ti_cpu_reset = omap4_prcm_reset;
|
|
|
|
/*
|
|
* In order to determine ARM frequency we need both RPM and CM1
|
|
* instances up and running. So wait until all CRM devices are
|
|
* initialized. Should be replaced with proper clock framework
|
|
*/
|
|
if (device_get_unit(dev) == 2) {
|
|
omap4_clk_get_arm_fclk_freq(NULL, &freq);
|
|
arm_tmr_change_frequency(freq / 2);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
static device_method_t omap4_prcm_methods[] = {
|
|
DEVMETHOD(device_probe, omap4_prcm_probe),
|
|
DEVMETHOD(device_attach, omap4_prcm_attach),
|
|
{0, 0},
|
|
};
|
|
|
|
static driver_t omap4_prcm_driver = {
|
|
"omap4_prcm",
|
|
omap4_prcm_methods,
|
|
sizeof(struct omap4_prcm_softc),
|
|
};
|
|
|
|
static devclass_t omap4_prcm_devclass;
|
|
|
|
EARLY_DRIVER_MODULE(omap4_prcm, simplebus, omap4_prcm_driver,
|
|
omap4_prcm_devclass, 0, 0, BUS_PASS_TIMER + BUS_PASS_ORDER_EARLY);
|
|
MODULE_VERSION(omap4_prcm, 1);
|