freebsd-dev/sys/mips/ingenic/jz4780_mp.c
Ruslan Bukin 9a8f61fb5b Bring in support for Ingenic XBurst JZ4780 and
X1000 systems on chips.

Imgtec CI20 and Ingenic CANNA boards supported.

Submitted by:	Alexander Kabaev <kan@FreeBSD.org>
Reviewed by:	Ruslan Bukin <br@FreeBSD.org>
Sponsored by:	DARPA, AFRL
2016-11-19 17:46:18 +00:00

183 lines
4.2 KiB
C

/*-
* Copyright (c) 2015 Alexander Kabaev <kan@FreeBSD.org>
* Copyright (c) 2004-2010 Juli Mallett <jmallett@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/smp.h>
#include <sys/systm.h>
#include <machine/cpufunc.h>
#include <machine/hwfunc.h>
#include <machine/md_var.h>
#include <machine/smp.h>
#include <mips/ingenic/jz4780_regs.h>
#include <mips/ingenic/jz4780_cpuregs.h>
void jz4780_mpentry(void);
#define JZ4780_MAXCPU 2
void
platform_ipi_send(int cpuid)
{
if (cpuid == 0)
mips_wr_xburst_mbox0(1);
else
mips_wr_xburst_mbox1(1);
}
void
platform_ipi_clear(void)
{
int cpuid = PCPU_GET(cpuid);
uint32_t action;
action = (cpuid == 0) ? mips_rd_xburst_mbox0() : mips_rd_xburst_mbox1();
KASSERT(action == 1, ("CPU %d: unexpected IPIs: %#x", cpuid, action));
mips_wr_xburst_core_sts(~(JZ_CORESTS_MIRQ0P << cpuid));
}
int
platform_processor_id(void)
{
return (mips_rd_ebase() & 7);
}
int
platform_ipi_hardintr_num(void)
{
return (1);
}
int
platform_ipi_softintr_num(void)
{
return (-1);
}
void
platform_init_ap(int cpuid)
{
unsigned reg;
/*
* Clear any pending IPIs.
*/
mips_wr_xburst_core_sts(~(JZ_CORESTS_MIRQ0P << cpuid));
/* Allow IPI mbox for this core */
reg = mips_rd_xburst_reim();
reg |= (JZ_REIM_MIRQ0M << cpuid);
mips_wr_xburst_reim(reg);
/*
* Unmask the ipi interrupts.
*/
reg = hard_int_mask(platform_ipi_hardintr_num());
set_intr_mask(reg);
}
void
platform_cpu_mask(cpuset_t *mask)
{
uint32_t i, m;
CPU_ZERO(mask);
for (i = 0, m = 1 ; i < JZ4780_MAXCPU; i++, m <<= 1)
CPU_SET(i, mask);
}
struct cpu_group *
platform_smp_topo(void)
{
return (smp_topo_none());
}
static void
jz4780_core_powerup(void)
{
uint32_t reg;
reg = readreg(JZ_CGU_BASE + JZ_LPCR);
reg &= ~LPCR_PD_SCPU;
writereg(JZ_CGU_BASE + JZ_LPCR, reg);
do {
reg = readreg(JZ_CGU_BASE + JZ_LPCR);
} while ((reg & LPCR_SCPUS) != 0);
}
/*
* Spin up the second code. The code is roughly modeled after
* similar routine in Linux.
*/
int
platform_start_ap(int cpuid)
{
uint32_t reg, addr;
if (cpuid >= JZ4780_MAXCPU)
return (EINVAL);
/* Figure out address of mpentry in KSEG1 */
addr = MIPS_PHYS_TO_KSEG1(MIPS_KSEG0_TO_PHYS(jz4780_mpentry));
KASSERT((addr & ~JZ_REIM_ENTRY_MASK) == 0,
("Unaligned mpentry"));
/* Configure core alternative entry point */
reg = mips_rd_xburst_reim();
reg &= ~JZ_REIM_ENTRY_MASK;
reg |= addr & JZ_REIM_ENTRY_MASK;
/* Allow this core to get IPIs from one being started */
reg |= JZ_REIM_MIRQ0M;
mips_wr_xburst_reim(reg);
/* Force core into reset and enable use of alternate entry point */
reg = mips_rd_xburst_core_ctl();
reg |= (JZ_CORECTL_SWRST0 << cpuid) | (JZ_CORECTL_RPC0 << cpuid);
mips_wr_xburst_core_ctl(reg);
/* Power the core up */
jz4780_core_powerup();
/* Take the core out of reset */
reg &= ~(JZ_CORECTL_SWRST0 << cpuid);
mips_wr_xburst_core_ctl(reg);
return (0);
}