bee3d4bf8e
When originally implemented, there was no distinction between DIRDEPS_BUILD and META_MODE, they were one and the same. META_MODE however is useful by itself, but since meta.sys.mk had lots of settings related to DIRDEPS_BUILD its use was limited to DIRDEPS_BUILD. Move (most) DIRDEPS_BUILD related items to sys.dirdeps.mk so that meta.sys.mk can be used for just META_MODE. There is of course some bluring of the lines, so settings remain in meta.sys.mk Add MK_META_ERROR_TARGET to enable the META_MODE .ERROR target independent of DIRDEPS_BUILD, it copies failed .meta files to ${SB}/error to make it easier to identify the cause of build failures. Since sys.dirdeps.mk should be included first, most of local.meta.sys.mk becomes local.sys.dirdeps.mk and some other bits need to move to local.sys.dirdeps.env.mk Also fix dirdeps.mk to not add CURDIR to DIRDEPS when it is SRCTOP. Reviewed by: bdrewery Differential Revision: https://reviews.freebsd.org/D40053
960 lines
31 KiB
Makefile
960 lines
31 KiB
Makefile
# $Id: dirdeps.mk,v 1.160 2023/05/10 20:44:58 sjg Exp $
|
|
|
|
# SPDX-License-Identifier: BSD-2-Clause
|
|
#
|
|
# Copyright (c) 2010-2023, Simon J. Gerraty
|
|
# Copyright (c) 2010-2018, Juniper Networks, Inc.
|
|
# All rights reserved.
|
|
#
|
|
# Redistribution and use in source and binary forms, with or without
|
|
# modification, are permitted provided that the following conditions
|
|
# are met:
|
|
# 1. Redistributions of source code must retain the above copyright
|
|
# notice, this list of conditions and the following disclaimer.
|
|
# 2. Redistributions in binary form must reproduce the above copyright
|
|
# notice, this list of conditions and the following disclaimer in the
|
|
# documentation and/or other materials provided with the distribution.
|
|
#
|
|
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
# Much of the complexity here is for supporting cross-building.
|
|
# If a tree does not support that, simply using plain Makefile.depend
|
|
# should provide sufficient clue.
|
|
# Otherwise the recommendation is to use Makefile.depend.${MACHINE}
|
|
# as expected below.
|
|
|
|
# Note: this file gets multiply included.
|
|
# This is what we do with DIRDEPS
|
|
|
|
# DIRDEPS:
|
|
# This is a list of directories - relative to SRCTOP, it is
|
|
# normally only of interest to .MAKE.LEVEL 0.
|
|
# In some cases the entry may be qualified with a .<machine>
|
|
# or .<target_spec> suffix (see TARGET_SPEC_VARS below),
|
|
# for example to force building something for the pseudo
|
|
# machines "host" or "common" regardless of current ${MACHINE}.
|
|
#
|
|
# All unqualified entries end up being qualified with .${TARGET_SPEC}
|
|
# and partially qualified (if TARGET_SPEC_VARS has multiple
|
|
# entries) are also expanded to a full .<target_spec>.
|
|
# The _DIRDEP_USE target uses the suffix to set TARGET_SPEC
|
|
# correctly when visiting each entry.
|
|
#
|
|
# The fully qualified directory entries are used to construct a
|
|
# dependency graph that will drive the build later.
|
|
#
|
|
# Also, for each fully qualified directory target, we will search
|
|
# using ${.MAKE.DEPENDFILE_PREFERENCE} to find additional
|
|
# dependencies. We use Makefile.depend (default value for
|
|
# .MAKE.DEPENDFILE_PREFIX) to refer to these makefiles to
|
|
# distinguish them from others.
|
|
#
|
|
# Before each Makefile.depend file is read, we set
|
|
# DEP_RELDIR to be the RELDIR (path relative to SRCTOP) for
|
|
# its directory, and DEP_MACHINE etc according to the .<target_spec>
|
|
# represented by the suffix of the corresponding target.
|
|
#
|
|
# Since each Makefile.depend file includes dirdeps.mk, this
|
|
# processing is recursive and results in .MAKE.LEVEL 0 learning the
|
|
# dependencies of the tree wrt the initial directory (_DEP_RELDIR).
|
|
#
|
|
# NOTE: given the extent of processing that DIRDEPS undergoes it
|
|
# is important that any variables in entries use :U to guard
|
|
# against surprises when undefined.
|
|
#
|
|
# TARGET_SPEC_VARS
|
|
# The default value is just MACHINE, and for most environments
|
|
# this is sufficient. The _DIRDEP_USE target actually sets
|
|
# both MACHINE and TARGET_SPEC to the suffix of the current
|
|
# target so that in the general case TARGET_SPEC can be ignored.
|
|
#
|
|
# If more than MACHINE is needed then sys.mk needs to decompose
|
|
# TARGET_SPEC and set the relevant variables accordingly.
|
|
# It is important that MACHINE be included in and actually be
|
|
# the first member of TARGET_SPEC_VARS. This allows other
|
|
# variables to be considered optional, and some of the treatment
|
|
# below relies on MACHINE being the first entry.
|
|
# Note: TARGET_SPEC cannot contain any '.'s so the target
|
|
# triple used by compiler folk won't work (directly anyway).
|
|
#
|
|
# For example:
|
|
#
|
|
# # Always list MACHINE first,
|
|
# # other variables might be optional.
|
|
# TARGET_SPEC_VARS = MACHINE TARGET_OS
|
|
# .if ${TARGET_SPEC:Uno:M*,*} != ""
|
|
# _tspec := ${TARGET_SPEC:S/,/ /g}
|
|
# MACHINE := ${_tspec:[1]}
|
|
# TARGET_OS := ${_tspec:[2]}
|
|
# # etc.
|
|
# # We need to stop that TARGET_SPEC affecting any submakes
|
|
# # and deal with MACHINE=${TARGET_SPEC} in the environment.
|
|
# TARGET_SPEC =
|
|
# # export but do not track
|
|
# .export-env TARGET_SPEC
|
|
# .export ${TARGET_SPEC_VARS}
|
|
# .for v in ${TARGET_SPEC_VARS:O:u}
|
|
# .if empty($v)
|
|
# .undef $v
|
|
# .endif
|
|
# .endfor
|
|
# .endif
|
|
# # make sure we know what TARGET_SPEC is
|
|
# # as we may need it to find Makefile.depend*
|
|
# TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,}
|
|
#
|
|
# The following variables can influence the initial DIRDEPS
|
|
# computation with regard to the TARGET_SPECs that will be
|
|
# built.
|
|
# Most should also be considered by init.mk
|
|
#
|
|
# ONLY_TARGET_SPEC_LIST
|
|
# Defines a list of TARGET_SPECs for which the current
|
|
# directory can be built.
|
|
# If ALL_MACHINES is defined, we build for all the
|
|
# TARGET_SPECs listed.
|
|
#
|
|
# ONLY_MACHINE_LIST
|
|
# As for ONLY_TARGET_SPEC_LIST but only specifies
|
|
# MACHINEs.
|
|
#
|
|
# NOT_TARGET_SPEC_LIST
|
|
# A list of TARGET_SPECs for which the current
|
|
# directory should not be built.
|
|
#
|
|
# NOT_MACHINE_LIST
|
|
# A list of MACHINEs the current directory should not be
|
|
# built for.
|
|
#
|
|
# DIRDEPS_EXPORT_VARS (DEP_EXPORT_VARS)
|
|
# It is discouraged, but sometimes necessary for a
|
|
# Makefile.depend file to influence the environment.
|
|
# Doing this is correctly (especially if using DIRDEPS_CACHE) is
|
|
# tricky so a Makefile.depend file can set DIRDEPS_EXPORT_VARS
|
|
# and dirdeps.mk will do the deed:
|
|
#
|
|
# MK_UEFI = yes
|
|
# DIRDEPS_EXPORT_VARS = MK_UEFI
|
|
#
|
|
# _build_xtra_dirs
|
|
# local.dirdeps.mk can add targets to this variable.
|
|
# They will be hooked into the build, but independent of
|
|
# any other DIRDEP.
|
|
#
|
|
# This allows for adding TESTS to the build, such that the build
|
|
# if any test fails, but without the risk of introducing
|
|
# circular dependencies.
|
|
|
|
now_utc ?= ${%s:L:gmtime}
|
|
.if !defined(start_utc)
|
|
start_utc := ${now_utc}
|
|
.endif
|
|
|
|
.if !target(bootstrap) && (make(bootstrap) || \
|
|
make(bootstrap-this) || \
|
|
make(bootstrap-recurse) || \
|
|
make(bootstrap-empty))
|
|
# disable most of below
|
|
.MAKE.LEVEL = 1
|
|
.endif
|
|
|
|
# touch this at your peril
|
|
_DIRDEP_USE_LEVEL?= 0
|
|
.if ${.MAKE.LEVEL} == ${_DIRDEP_USE_LEVEL}
|
|
# only the first instance is interested in all this
|
|
|
|
# the first time we are included the _DIRDEP_USE target will not be defined
|
|
# we can use this as a clue to do initialization and other one time things.
|
|
.if !target(_DIRDEP_USE)
|
|
|
|
# do some setup we only need once
|
|
_CURDIR ?= ${.CURDIR}
|
|
_OBJDIR ?= ${.OBJDIR}
|
|
|
|
.if ${MAKEFILE:T} == ${.PARSEFILE} && empty(DIRDEPS) && ${.TARGETS:Uall:M*[/.]*} != ""
|
|
# This little trick let's us do
|
|
#
|
|
# mk -f dirdeps.mk some/dir.${TARGET_SPEC}
|
|
#
|
|
all:
|
|
${.TARGETS:Nall}: all
|
|
DIRDEPS := ${.TARGETS:M*[/.]*}
|
|
# so that -DNO_DIRDEPS works
|
|
DEP_RELDIR := ${DIRDEPS:[1]:R}
|
|
# this will become DEP_MACHINE below
|
|
TARGET_MACHINE := ${DIRDEPS:[1]:E:C/,.*//}
|
|
.if ${TARGET_MACHINE:N*/*} == ""
|
|
TARGET_MACHINE := ${MACHINE}
|
|
.endif
|
|
# disable DIRDEPS_CACHE as it does not like this trick
|
|
MK_DIRDEPS_CACHE = no
|
|
# incase anyone needs to know
|
|
_dirdeps_cmdline:
|
|
.endif
|
|
|
|
# make sure we get the behavior we expect
|
|
.MAKE.SAVE_DOLLARS = no
|
|
|
|
# make sure these are empty to start with
|
|
_DEP_TARGET_SPEC =
|
|
|
|
# If TARGET_SPEC_VARS is other than just MACHINE
|
|
# it should be set by sys.mk or similar by now.
|
|
# TARGET_SPEC must not contain any '.'s.
|
|
TARGET_SPEC_VARS ?= MACHINE
|
|
# this is what we started with
|
|
TARGET_SPEC = ${TARGET_SPEC_VARS:@v@${$v:U}@:ts,}
|
|
# this is what we mostly use below
|
|
DEP_TARGET_SPEC = ${TARGET_SPEC_VARS:S,^,DEP_,:@v@${$v:U}@:ts,}
|
|
# make sure we have defaults
|
|
.for v in ${TARGET_SPEC_VARS}
|
|
DEP_$v ?= ${$v}
|
|
.endfor
|
|
|
|
.if ${TARGET_SPEC_VARS:[#]} > 1
|
|
# Ok, this gets more complex (putting it mildly).
|
|
# In order to stay sane, we need to ensure that all the build_dirs
|
|
# we compute below are fully qualified wrt DEP_TARGET_SPEC.
|
|
# The makefiles may only partially specify (eg. MACHINE only),
|
|
# so we need to construct a set of modifiers to fill in the gaps.
|
|
.if ${MAKE_VERSION} >= 20170130
|
|
_tspec_x := ${TARGET_SPEC_VARS:range}
|
|
.else
|
|
# do it the hard way
|
|
_tspec_x := ${TARGET_SPEC_VARS:[#]:@x@i=1;while [ $$i -le $x ]; do echo $$i; i=$$((i + 1)); done;@:sh}
|
|
.endif
|
|
# this handles unqualified entries
|
|
M_dep_qual_fixes = C;(/[^/.,]+)$$;\1.$${DEP_TARGET_SPEC};
|
|
# there needs to be at least one item missing for these to make sense
|
|
.for i in ${_tspec_x:[2..-1]}
|
|
_tspec_m$i := ${TARGET_SPEC_VARS:[2..$i]:@w@[^,]+@:ts,}
|
|
_tspec_a$i := ,${TARGET_SPEC_VARS:[$i..-1]:@v@$$$${DEP_$v}@:ts,}
|
|
M_dep_qual_fixes += C;(\.${_tspec_m$i})$$;\1${_tspec_a$i};
|
|
.endfor
|
|
TARGET_SPEC_VARSr := ${TARGET_SPEC_VARS:[-1..1]}
|
|
.else
|
|
# A harmless? default.
|
|
M_dep_qual_fixes = U
|
|
.endif
|
|
|
|
.if !defined(.MAKE.DEPENDFILE_PREFERENCE)
|
|
# .MAKE.DEPENDFILE_PREFERENCE makes the logic below neater?
|
|
# you really want this set by sys.mk or similar
|
|
.MAKE.DEPENDFILE_PREFERENCE = ${_CURDIR}/${.MAKE.DEPENDFILE:T}
|
|
.if ${.MAKE.DEPENDFILE:E} == "${TARGET_SPEC}"
|
|
.if ${TARGET_SPEC} != ${MACHINE}
|
|
.MAKE.DEPENDFILE_PREFERENCE += ${_CURDIR}/${.MAKE.DEPENDFILE:T:R}.$${MACHINE}
|
|
.endif
|
|
.MAKE.DEPENDFILE_PREFERENCE += ${_CURDIR}/${.MAKE.DEPENDFILE:T:R}
|
|
.endif
|
|
.endif
|
|
|
|
_default_dependfile := ${.MAKE.DEPENDFILE_PREFERENCE:[1]:T}
|
|
_machine_dependfiles := ${.MAKE.DEPENDFILE_PREFERENCE:T:M*${MACHINE}*}
|
|
|
|
# for machine specific dependfiles we require ${MACHINE} to be at the end
|
|
# also for the sake of sanity we require a common prefix
|
|
.if !defined(.MAKE.DEPENDFILE_PREFIX)
|
|
# knowing .MAKE.DEPENDFILE_PREFIX helps
|
|
.if !empty(_machine_dependfiles)
|
|
.MAKE.DEPENDFILE_PREFIX := ${_machine_dependfiles:[1]:T:R}
|
|
.else
|
|
.MAKE.DEPENDFILE_PREFIX := ${_default_dependfile:T}
|
|
.endif
|
|
.endif
|
|
|
|
# turn a list into a set of :N modifiers
|
|
# NskipFoo = ${Foo:${M_ListToSkip}}
|
|
M_ListToSkip ?= O:u:S,^,N,:ts:
|
|
|
|
# this is how we identify non-machine specific dependfiles
|
|
N_notmachine := ${.MAKE.DEPENDFILE_PREFERENCE:E:N*${MACHINE}*:${M_ListToSkip}}
|
|
|
|
# this gets reset for each dirdep we check
|
|
DEP_RELDIR ?= ${RELDIR}
|
|
|
|
# remember the initial value of DEP_RELDIR - we test for it below.
|
|
_DEP_RELDIR := ${DEP_RELDIR}
|
|
|
|
# this can cause lots of output!
|
|
# set to a set of glob expressions that might match RELDIR
|
|
DEBUG_DIRDEPS ?= no
|
|
|
|
# make sure this target exists
|
|
dirdeps: beforedirdeps .WAIT
|
|
beforedirdeps:
|
|
|
|
.endif # !target(_DIRDEP_USE)
|
|
|
|
.if ${DEBUG_DIRDEPS:@x@${DEP_RELDIR:M$x}${${DEP_RELDIR}.${DEP_MACHINE}:L:M$x}@} != ""
|
|
_debug_reldir = 1
|
|
.else
|
|
_debug_reldir = 0
|
|
.endif
|
|
.if ${DEBUG_DIRDEPS:@x@${DEP_RELDIR:M$x}${${DEP_RELDIR}.depend depend:L:M$x}@} != ""
|
|
_debug_search = 1
|
|
.else
|
|
_debug_search = 0
|
|
.endif
|
|
|
|
# First off, we want to know what ${MACHINE} to build for.
|
|
# This can be complicated if we are using a mixture of ${MACHINE} specific
|
|
# and non-specific Makefile.depend*
|
|
|
|
# if we were included recursively _DEP_TARGET_SPEC should be valid.
|
|
.if empty(_DEP_TARGET_SPEC)
|
|
DEP_MACHINE = ${TARGET_MACHINE:U${MACHINE}}
|
|
_DEP_TARGET_SPEC := ${DEP_TARGET_SPEC}
|
|
.if ${.INCLUDEDFROMFILE:U:M${.MAKE.DEPENDFILE_PREFIX}*} != ""
|
|
# record that we've read dependfile for this
|
|
_dirdeps_checked.${_CURDIR}.${TARGET_SPEC}:
|
|
.endif
|
|
.endif
|
|
|
|
# by now _DEP_TARGET_SPEC should be set, parse it.
|
|
.if ${TARGET_SPEC_VARS:[#]} > 1
|
|
# we need to parse DEP_MACHINE may or may not contain more info
|
|
_tspec := ${_DEP_TARGET_SPEC:S/,/ /g}
|
|
.for i in ${_tspec_x}
|
|
DEP_${TARGET_SPEC_VARS:[$i]} := ${_tspec:[$i]}
|
|
.endfor
|
|
.for v in ${TARGET_SPEC_VARS:O:u}
|
|
.if empty(DEP_$v)
|
|
.undef DEP_$v
|
|
.endif
|
|
.endfor
|
|
.else
|
|
DEP_MACHINE := ${_DEP_TARGET_SPEC}
|
|
.endif
|
|
|
|
# host is special
|
|
.if ${DEP_MACHINE:Mhost*} != ""
|
|
DEP_TARGET_SPEC = ${DEP_MACHINE}
|
|
.for v in ${TARGET_SPEC_VARS:O:u:NMACHINE}
|
|
.undef DEP_$v
|
|
.endfor
|
|
.endif
|
|
|
|
# reset each time through
|
|
_build_all_dirs =
|
|
_build_xtra_dirs =
|
|
|
|
# DIRDEPS_CACHE can be very handy for debugging.
|
|
# Also if repeatedly building the same target,
|
|
# we can avoid the overhead of re-computing the tree dependencies.
|
|
MK_DIRDEPS_CACHE ?= no
|
|
BUILD_DIRDEPS_CACHE ?= no
|
|
BUILD_DIRDEPS ?= yes
|
|
|
|
.if ${MK_DIRDEPS_CACHE} == "yes"
|
|
# this is where we will cache all our work
|
|
DIRDEPS_CACHE ?= ${_OBJDIR:tA}/dirdeps.cache${_TARGETS:U${.TARGETS}:Nall:O:u:ts-:S,/,_,g:S,^,.,:N.}
|
|
.endif
|
|
|
|
# sanity check: Makefile.depend.options should *not* include us
|
|
.if ${.INCLUDEDFROMFILE:U:M${.MAKE.DEPENDFILE_PREFIX}.options} != ""
|
|
.error ${DEP_RELDIR}/${.MAKE.DEPENDFILE_PREFIX}.options: should include dirdeps-options.mk
|
|
.endif
|
|
|
|
# pickup customizations
|
|
# as below you can use !target(_DIRDEP_USE) to protect things
|
|
# which should only be done once.
|
|
.-include <local.dirdeps.mk>
|
|
|
|
.if !target(_DIRDEP_USE)
|
|
# things we skip for host tools
|
|
SKIP_HOSTDIR ?=
|
|
|
|
NSkipHostDir = ${SKIP_HOSTDIR:N*.host*:S,$,.host*,:N.host*:S,^,${SRCTOP}/,:${M_ListToSkip}}
|
|
|
|
# things we always skip
|
|
# SKIP_DIRDEPS allows for adding entries on command line.
|
|
SKIP_DIR += .host *.WAIT ${SKIP_DIRDEPS}
|
|
SKIP_DIR.host += ${SKIP_HOSTDIR}
|
|
|
|
DEP_SKIP_DIR = ${SKIP_DIR} \
|
|
${SKIP_DIR.${DEP_TARGET_SPEC}:U} \
|
|
${TARGET_SPEC_VARS:@v@${SKIP_DIR.${DEP_$v}:U}@} \
|
|
${SKIP_DIRDEPS.${DEP_TARGET_SPEC}:U} \
|
|
${TARGET_SPEC_VARS:@v@${SKIP_DIRDEPS.${DEP_$v}:U}@}
|
|
|
|
|
|
NSkipDir = ${DEP_SKIP_DIR:${M_ListToSkip}}
|
|
|
|
.if defined(NODIRDEPS) || defined(WITHOUT_DIRDEPS)
|
|
NO_DIRDEPS =
|
|
.elif defined(WITHOUT_DIRDEPS_BELOW)
|
|
NO_DIRDEPS_BELOW =
|
|
.endif
|
|
|
|
.if defined(NO_DIRDEPS)
|
|
# confine ourselves to the original dir and below.
|
|
DIRDEPS_FILTER += M${_DEP_RELDIR}*
|
|
.elif defined(NO_DIRDEPS_BELOW)
|
|
DIRDEPS_FILTER += M${_DEP_RELDIR}
|
|
.endif
|
|
|
|
# this is what we run below
|
|
DIRDEP_MAKE ?= ${.MAKE}
|
|
DIRDEP_DIR ?= ${.TARGET:R}
|
|
|
|
# if you want us to report load averages during build
|
|
# DIRDEP_USE_PRELUDE += ${DIRDEP_LOADAVG_REPORT};
|
|
|
|
DIRDEP_LOADAVG_CMD ?= ${UPTIME:Uuptime} | sed 's,.*\(load\),\1,'
|
|
DIRDEP_LOADAVG_LAST = 0
|
|
# yes the expression here is a bit complicated,
|
|
# the trick is to only eval ${DIRDEP_LOADAVG_LAST::=${now_utc}}
|
|
# when we want to report.
|
|
# Note: expr(1) will exit 1 if the expression evaluates to 0
|
|
# hence the || true
|
|
DIRDEP_LOADAVG_REPORT = \
|
|
test -z "${"${expr ${now_utc} - ${DIRDEP_LOADAVG_INTERVAL:U60} - ${DIRDEP_LOADAVG_LAST} || true:L:sh:N-*}":?yes${DIRDEP_LOADAVG_LAST::=${now_utc}}:}" || \
|
|
echo "${TRACER}`${DIRDEP_LOADAVG_CMD}`"
|
|
|
|
# we suppress SUBDIR when visiting the leaves
|
|
# we assume sys.mk will set MACHINE_ARCH
|
|
# you can add extras to DIRDEP_USE_ENV
|
|
# if there is no makefile in the target directory, we skip it.
|
|
_DIRDEP_USE: .USE .MAKE
|
|
@for m in ${.MAKE.MAKEFILE_PREFERENCE}; do \
|
|
test -s ${.TARGET:R}/$$m || continue; \
|
|
echo "${TRACER}Checking ${.TARGET:S,^${SRCTOP}/,,} for ${.TARGET:E} ..."; \
|
|
${DIRDEP_USE_PRELUDE} \
|
|
MACHINE_ARCH= NO_SUBDIR=1 ${DIRDEP_USE_ENV} \
|
|
TARGET_SPEC=${.TARGET:E} \
|
|
MACHINE=${.TARGET:E} \
|
|
${DIRDEP_MAKE} -C ${DIRDEP_DIR} || exit 1; \
|
|
break; \
|
|
done
|
|
|
|
.ifdef ALL_MACHINES
|
|
.if empty(ONLY_TARGET_SPEC_LIST) && empty(ONLY_MACHINE_LIST)
|
|
# we start with everything
|
|
_machine_list != echo; 'ls' -1 ${_CURDIR}/${.MAKE.DEPENDFILE_PREFIX}* 2> /dev/null
|
|
|
|
# some things we know we want to ignore
|
|
DIRDEPS_TARGETS_SKIP_LIST += \
|
|
*~ \
|
|
*.bak \
|
|
*.inc \
|
|
*.old \
|
|
*.options \
|
|
*.orig \
|
|
*.rej \
|
|
|
|
# first trim things we know we want to skip
|
|
# and provide canonical form
|
|
_machine_list := ${_machine_list:${DIRDEPS_TARGETS_SKIP_LIST:${M_ListToSkip}}:T:E}
|
|
|
|
# cater for local complexities
|
|
# local.dirdeps.mk can set
|
|
# DIRDEPS_ALL_MACHINES_FILTER and
|
|
# DIRDEPS_ALL_MACHINES_FILTER_XTRAS for final tweaks
|
|
|
|
.if !empty(ALL_TARGET_SPEC_LIST)
|
|
.if ${_debug_reldir}
|
|
.info ALL_TARGET_SPEC_LIST=${ALL_TARGET_SPEC_LIST}
|
|
.endif
|
|
DIRDEPS_ALL_MACHINES_FILTER += \
|
|
@x@$${ALL_TARGET_SPEC_LIST:@s@$${x:M$$s}@}@
|
|
.elif !empty(ALL_MACHINE_LIST)
|
|
.if ${_debug_reldir}
|
|
.info ALL_MACHINE_LIST=${ALL_MACHINE_LIST}
|
|
.endif
|
|
.if ${TARGET_SPEC_VARS:[#]} > 1
|
|
# the space below can result in extraneous ':'
|
|
DIRDEPS_ALL_MACHINES_FILTER += \
|
|
@x@$${ALL_MACHINE_LIST:@m@$${x:M$$m,*} $${x:M$$m}@}@
|
|
.else
|
|
DIRDEPS_ALL_MACHINES_FILTER += \
|
|
@x@$${ALL_MACHINE_LIST:@m@$${x:M$$m}@}@
|
|
.endif
|
|
.endif
|
|
# add local XTRAS - default to something benign
|
|
DIRDEPS_ALL_MACHINES_FILTER += \
|
|
${DIRDEPS_ALL_MACHINES_FILTER_XTRAS:UNbak}
|
|
|
|
.if ${_debug_reldir}
|
|
.info _machine_list=${_machine_list}
|
|
.info DIRDEPS_ALL_MACHINES_FILTER=${DIRDEPS_ALL_MACHINES_FILTER}
|
|
.endif
|
|
|
|
_only_machines := ${_machine_list:${DIRDEPS_ALL_MACHINES_FILTER:ts:}:S,:, ,g}
|
|
.else
|
|
_only_machines := ${ONLY_TARGET_SPEC_LIST:U} ${ONLY_MACHINE_LIST:U}
|
|
.endif
|
|
|
|
.if empty(_only_machines)
|
|
# we must be boot-strapping
|
|
_only_machines := ${TARGET_MACHINE:U${ALL_TARGET_SPEC_LIST:U${ALL_MACHINE_LIST:U${DEP_MACHINE}}}}
|
|
.endif
|
|
|
|
# cleanup the result
|
|
_only_machines := ${_only_machines:O:u}
|
|
|
|
.if ${_debug_reldir}
|
|
.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: ALL_MACHINES _only_machines=${_only_machines}
|
|
.endif
|
|
|
|
.else # ! ALL_MACHINES
|
|
# if ONLY_TARGET_SPEC_LIST or ONLY_MACHINE_LIST is set, we are limited to that.
|
|
# Note that ONLY_TARGET_SPEC_LIST should be fully qualified.
|
|
# if TARGET_MACHINE is set - it is really the same as ONLY_MACHINE_LIST
|
|
# otherwise DEP_MACHINE is it - so DEP_MACHINE will match.
|
|
_only_machines := ${ONLY_TARGET_SPEC_LIST:U:M${DEP_MACHINE},*}
|
|
.if empty(_only_machines)
|
|
_only_machines := ${ONLY_MACHINE_LIST:U${TARGET_MACHINE:U${DEP_MACHINE}}:M${DEP_MACHINE}}
|
|
.endif
|
|
.endif
|
|
|
|
.if !empty(NOT_MACHINE_LIST)
|
|
_only_machines := ${_only_machines:${NOT_MACHINE_LIST:${M_ListToSkip}}}
|
|
.endif
|
|
.if !empty(NOT_TARGET_SPEC_LIST)
|
|
# we must first qualify
|
|
_dm := ${DEP_MACHINE}
|
|
_only_machines := ${_only_machines:M*,*} ${_only_machines:N*,*:@DEP_MACHINE@${DEP_TARGET_SPEC}@:S,^,.,:${M_dep_qual_fixes:ts:}:O:u:S,^.,,}
|
|
DEP_MACHINE := ${_dm}
|
|
_only_machines := ${_only_machines:${NOT_TARGET_SPEC_LIST:${M_ListToSkip}}}
|
|
.endif
|
|
# clean up
|
|
_only_machines := ${_only_machines:O:u}
|
|
|
|
.if ${_debug_reldir}
|
|
.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: _only_machines=${_only_machines}
|
|
.endif
|
|
|
|
# make sure we have a starting place?
|
|
DIRDEPS ?= ${RELDIR}
|
|
.endif # target
|
|
|
|
.if !defined(NO_DIRDEPS) && !defined(NO_DIRDEPS_BELOW)
|
|
.if ${MK_DIRDEPS_CACHE} == "yes"
|
|
|
|
# just ensure this exists
|
|
build-dirdeps:
|
|
|
|
M_oneperline = @x@\\${.newline} $$x@
|
|
|
|
.if ${BUILD_DIRDEPS_CACHE} == "no"
|
|
.if !target(dirdeps-cached)
|
|
# we do this via sub-make
|
|
BUILD_DIRDEPS = no
|
|
|
|
# ignore anything but these
|
|
.MAKE.META.IGNORE_FILTER = M*/${.MAKE.DEPENDFILE_PREFIX}*
|
|
|
|
dirdeps: dirdeps-cached
|
|
dirdeps-cached: ${DIRDEPS_CACHE} .MAKE
|
|
@echo "${TRACER}Using ${DIRDEPS_CACHE}"
|
|
@MAKELEVEL=${.MAKE.LEVEL} \
|
|
TARGET_SPEC=${TARGET_SPEC} \
|
|
${TARGET_SPEC_VARS:@v@$v=${$v}@} \
|
|
${.MAKE} -C ${_CURDIR} -f ${DIRDEPS_CACHE} \
|
|
dirdeps MK_DIRDEPS_CACHE=no BUILD_DIRDEPS=no
|
|
|
|
# leaf makefiles rarely work for building DIRDEPS_CACHE
|
|
.if ${RELDIR} != "."
|
|
BUILD_DIRDEPS_MAKEFILE ?= -f dirdeps.mk
|
|
.endif
|
|
|
|
# these should generally do
|
|
BUILD_DIRDEPS_MAKEFILE ?=
|
|
BUILD_DIRDEPS_TARGETS ?= ${.TARGETS}
|
|
|
|
.if ${DIRDEPS_CACHE} != ${STATIC_DIRDEPS_CACHE:Uno} && ${DIRDEPS_CACHE:M${SRCTOP}/*} == ""
|
|
# export this for dirdeps-cache-update.mk
|
|
DYNAMIC_DIRDEPS_CACHE := ${DIRDEPS_CACHE}
|
|
.export DYNAMIC_DIRDEPS_CACHE
|
|
# we need the .meta file to ensure we update if
|
|
# any of the Makefile.depend* changed.
|
|
# We do not want to compare the command line though.
|
|
${DIRDEPS_CACHE}: .META .NOMETA_CMP
|
|
+@{ echo '# Autogenerated - do NOT edit!'; echo; \
|
|
echo 'BUILD_DIRDEPS=no'; echo; \
|
|
echo '.include <dirdeps.mk>'; echo; \
|
|
} > ${.TARGET}.new
|
|
+@MAKELEVEL=${.MAKE.LEVEL} DIRDEPS_CACHE=${DIRDEPS_CACHE} \
|
|
DIRDEPS="${DIRDEPS}" \
|
|
TARGET_SPEC=${TARGET_SPEC} \
|
|
MAKEFLAGS= ${DIRDEP_CACHE_MAKE:U${.MAKE}} -C ${_CURDIR} \
|
|
${BUILD_DIRDEPS_MAKEFILE} \
|
|
${BUILD_DIRDEPS_TARGETS} BUILD_DIRDEPS_CACHE=yes \
|
|
.MAKE.DEPENDFILE=.none \
|
|
${"${DEBUG_DIRDEPS:Nno}":?DEBUG_DIRDEPS='${DEBUG_DIRDEPS}':} \
|
|
${.MAKEFLAGS:tW:S,-D ,-D,g:tw:M*WITH*} \
|
|
${.MAKEFLAGS:tW:S,-d ,-d,g:tw:M-d*} \
|
|
3>&1 1>&2 | sed 's,${SRCTOP},_{SRCTOP},g;s,_{SRCTOP}/_{SRCTOP},_{SRCTOP},g;s,_{,$${,g' >> ${.TARGET}.new && \
|
|
mv ${.TARGET}.new ${.TARGET}
|
|
|
|
.endif
|
|
.endif
|
|
.elif !target(_count_dirdeps)
|
|
# we want to capture the dirdeps count in the cache
|
|
.END: _count_dirdeps
|
|
_count_dirdeps: .NOMETA
|
|
@{ echo; echo '.info $${.newline}$${TRACER}Makefiles read: total=${.MAKE.MAKEFILES:[#]} depend=${.MAKE.MAKEFILES:M*depend*:[#]} dirdeps=${.ALLTARGETS:M${SRCTOP}*:O:u:[#]} ${DIRDEP_INFO_XTRAS}'; } >&3
|
|
|
|
.endif
|
|
.elif !make(dirdeps) && !target(_count_dirdeps)
|
|
beforedirdeps: _count_dirdeps
|
|
_count_dirdeps: .NOMETA
|
|
@echo "${TRACER}Makefiles read: total=${.MAKE.MAKEFILES:[#]} depend=${.MAKE.MAKEFILES:M*depend*:[#]} dirdeps=${.ALLTARGETS:M${SRCTOP}*:O:u:[#]} ${DIRDEP_INFO_XTRAS} seconds=`expr ${now_utc} - ${start_utc}`"
|
|
|
|
.endif
|
|
.endif
|
|
|
|
.if ${BUILD_DIRDEPS} == "yes"
|
|
|
|
# the rest is done repeatedly for every Makefile.depend we read.
|
|
# if we are anything but the original dir we care only about the
|
|
# machine type we were included for..
|
|
|
|
.if ${DEP_RELDIR} == "."
|
|
_this_dir := ${SRCTOP}
|
|
.else
|
|
_this_dir := ${SRCTOP}/${DEP_RELDIR}
|
|
.endif
|
|
|
|
# on rare occasions, there can be a need for extra help
|
|
_dep_hack := ${_this_dir}/${.MAKE.DEPENDFILE_PREFIX}.inc
|
|
.-include <${_dep_hack}>
|
|
.-include <${_dep_hack:R}.options>
|
|
|
|
.if ${DEP_RELDIR} != ${_DEP_RELDIR} || ${DEP_TARGET_SPEC} != ${TARGET_SPEC}
|
|
# this should be all
|
|
_machines := ${DEP_MACHINE}
|
|
.else
|
|
# this is the machine list we actually use below
|
|
_machines := ${_only_machines}
|
|
|
|
.if defined(HOSTPROG) || ${DEP_MACHINE:Nhost*} == ""
|
|
# we need to build this guy's dependencies for host as well.
|
|
.if ${DEP_MACHINE:Nhost*} == ""
|
|
_machines += ${DEP_MACHINE}
|
|
.else
|
|
_machines += host
|
|
.endif
|
|
.endif
|
|
|
|
_machines := ${_machines:O:u}
|
|
.endif
|
|
|
|
.if ${TARGET_SPEC_VARS:[#]} > 1
|
|
# we need to tweak _machines
|
|
_dm := ${DEP_MACHINE}
|
|
# apply the same filtering that we do when qualifying DIRDEPS.
|
|
# M_dep_qual_fixes expects .${MACHINE}* so add (and remove) '.'
|
|
# Again we expect that any already qualified machines are fully qualified.
|
|
_machines := ${_machines:M*,*} ${_machines:N*,*:@DEP_MACHINE@${DEP_TARGET_SPEC}@:S,^,.,:S,^.,,}
|
|
DEP_MACHINE := ${_dm}
|
|
_machines := ${_machines:${M_dep_qual_fixes:ts:}:O:u}
|
|
.endif
|
|
|
|
# reset each time through
|
|
_build_dirs =
|
|
|
|
.if ${DEP_RELDIR} == ${_DEP_RELDIR} && ${_CURDIR} != ${SRCTOP}
|
|
# pickup other machines for this dir if necessary
|
|
_build_dirs += ${_machines:@m@${_CURDIR}.$m@}
|
|
.endif
|
|
|
|
.if ${_debug_reldir}
|
|
.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: nDIRDEPS=${DIRDEPS:[#]}
|
|
.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: DIRDEPS='${DIRDEPS}'
|
|
.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: _machines='${_machines}'
|
|
.endif
|
|
|
|
.if !empty(DIRDEPS)
|
|
# these we reset each time through as they can depend on DEP_MACHINE
|
|
DEP_DIRDEPS_FILTER = \
|
|
${DIRDEPS_FILTER.${DEP_TARGET_SPEC}:U} \
|
|
${TARGET_SPEC_VARS:@v@${DIRDEPS_FILTER.${DEP_$v}:U}@} \
|
|
${DIRDEPS_FILTER:U}
|
|
.if empty(DEP_DIRDEPS_FILTER)
|
|
# something harmless
|
|
DEP_DIRDEPS_FILTER = U
|
|
.endif
|
|
|
|
# this is what we start with
|
|
__depdirs := ${DIRDEPS:${NSkipDir}:${DEP_DIRDEPS_FILTER:ts:}:C,//+,/,g:O:u:@d@${SRCTOP}/$d@}
|
|
|
|
# some entries may be qualified with .<machine> or .<target_spec>
|
|
# we can tell the unqualified ones easily - because they exist
|
|
__unqual_depdirs := ${__depdirs:@d@${exists($d):?$d:}@}
|
|
__qual_depdirs := ${__depdirs:${__unqual_depdirs:Uno:${M_ListToSkip}}}
|
|
|
|
.if ${DEP_RELDIR} == ${_DEP_RELDIR}
|
|
# if it was called out - we likely need it.
|
|
__hostdpadd := ${DPADD:U.:M${HOST_OBJTOP}/*:S,${HOST_OBJTOP}/,,:H:${NSkipDir}:${DIRDEPS_FILTER:ts:}:S,$,.host,:N.*:@d@${SRCTOP}/$d@} \
|
|
${DPADD:U.:M${HOST_OBJTOP32:Uno}/*:S,${HOST_OBJTOP32:Uno}/,,:H:${NSkipDir}:${DIRDEPS_FILTER:ts:}:S,$,.host32,:N.*:@d@${SRCTOP}/$d@}
|
|
__qual_depdirs += ${__hostdpadd}
|
|
.endif
|
|
|
|
.if ${_debug_reldir}
|
|
.info DEP_DIRDEPS_FILTER=${DEP_DIRDEPS_FILTER:ts:}
|
|
.info depdirs=${__depdirs:S,^${SRCTOP}/,,}
|
|
.info qualified=${__qual_depdirs:S,^${SRCTOP}/,,}
|
|
.info unqualified=${__unqual_depdirs:S,^${SRCTOP}/,,}
|
|
.endif
|
|
|
|
# _build_dirs is what we will feed to _DIRDEP_USE
|
|
_build_dirs += \
|
|
${__qual_depdirs:M*.host:${NSkipHostDir}:N.host} \
|
|
${__qual_depdirs:N*.host} \
|
|
${_machines:Mhost*:@m@${__unqual_depdirs:@d@$d.$m@}@:${NSkipHostDir}:N.host} \
|
|
${_machines:Nhost*:@m@${__unqual_depdirs:@d@$d.$m@}@}
|
|
|
|
# qualify everything now
|
|
_build_dirs := ${_build_dirs:${M_dep_qual_fixes:ts:}:O:u}
|
|
|
|
.endif # empty DIRDEPS
|
|
|
|
_build_all_dirs += ${_build_dirs} ${_build_xtra_dirs}
|
|
_build_all_dirs := ${_build_all_dirs:O:u}
|
|
|
|
# Normally if doing make -V something,
|
|
# we do not want to waste time chasing DIRDEPS
|
|
# but if we want to count the number of Makefile.depend* read, we do.
|
|
.if ${.MAKEFLAGS:M-V${_V_READ_DIRDEPS:U}} == ""
|
|
.if !empty(_build_all_dirs)
|
|
.if ${BUILD_DIRDEPS_CACHE} == "yes"
|
|
# we use _cache_script to minimize the number of times we fork the shell
|
|
_cache_script = echo '\# ${DEP_RELDIR}.${DEP_TARGET_SPEC}';
|
|
# guard against _new_dirdeps being too big for a single command line
|
|
_new_dirdeps := ${_build_all_dirs:@x@${target($x):?:$x}@:S,^${SRCTOP}/,,}
|
|
_cache_xtra_deps := ${_build_xtra_dirs:S,^${SRCTOP}/,,}
|
|
.export _cache_xtra_deps _new_dirdeps
|
|
.if !empty(DIRDEPS_EXPORT_VARS) || !empty(DEP_EXPORT_VARS)
|
|
# Discouraged, but there are always exceptions.
|
|
# Handle it here rather than explain how.
|
|
DIRDEPS_EXPORT_VARS ?= ${DEP_EXPORT_VARS}
|
|
_cache_xvars := echo; ${DIRDEPS_EXPORT_VARS:@v@echo '$v = ${$v}';@} echo '.export ${DIRDEPS_EXPORT_VARS}'; echo;
|
|
_cache_script += ${_cache_xvars}
|
|
.endif
|
|
.else
|
|
# this makes it all happen
|
|
dirdeps: ${_build_all_dirs}
|
|
.endif
|
|
${_build_all_dirs}: _DIRDEP_USE
|
|
|
|
.if ${_debug_reldir}
|
|
.info ${DEP_RELDIR}.${DEP_TARGET_SPEC}: needs: ${_build_dirs:S,^${SRCTOP}/,,}
|
|
.endif
|
|
|
|
.if !empty(DIRDEPS_EXPORT_VARS) || !empty(DEP_EXPORT_VARS)
|
|
.export ${DIRDEPS_EXPORT_VARS} ${DEP_EXPORT_VARS}
|
|
DIRDEPS_EXPORT_VARS =
|
|
DEP_EXPORT_VARS =
|
|
.endif
|
|
|
|
# this builds the dependency graph
|
|
.for m in ${_machines}
|
|
.if ${BUILD_DIRDEPS_CACHE} == "yes" && !empty(_build_dirs)
|
|
_cache_deps =
|
|
_cache_script += echo; echo 'DIRDEPS.${_this_dir}.$m = \';
|
|
.endif
|
|
# it would be nice to do :N${.TARGET}
|
|
.if !empty(__qual_depdirs)
|
|
.for q in ${__qual_depdirs:${M_dep_qual_fixes:ts:}:E:O:u:N$m}
|
|
.if ${_debug_reldir} || ${DEBUG_DIRDEPS:@x@${${DEP_RELDIR}.$m:L:M$x}${${DEP_RELDIR}.$q:L:M$x}@} != ""
|
|
.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$q:S,^${SRCTOP}/,,}
|
|
.endif
|
|
.if ${BUILD_DIRDEPS_CACHE} == "yes"
|
|
_cache_deps += ${_build_dirs:M*.$q:S,^${SRCTOP}/,,}
|
|
.else
|
|
${_this_dir}.$m: ${_build_dirs:M*.$q}
|
|
.endif
|
|
.endfor
|
|
.endif
|
|
.if ${_debug_reldir}
|
|
.info ${DEP_RELDIR}.$m: graph: ${_build_dirs:M*.$m:N${_this_dir}.$m:S,^${SRCTOP}/,,}
|
|
.endif
|
|
.if ${BUILD_DIRDEPS_CACHE} == "yes"
|
|
.if !empty(_build_dirs)
|
|
_cache_deps += ${_build_dirs:M*.$m:N${_this_dir}.$m:S,^${SRCTOP}/,,}
|
|
.if !empty(_cache_deps)
|
|
.export _cache_deps
|
|
_cache_script += for x in $$_cache_deps; do echo " _{SRCTOP}/$$x \\"; done;
|
|
.endif
|
|
# anything in _{build,env}_xtra_dirs is hooked to dirdeps: only
|
|
x!= echo; { echo; ${_cache_script} echo; echo '${_this_dir}.$m: $${DIRDEPS.${_this_dir}.$m}'; \
|
|
echo; echo 'dirdeps: ${_this_dir}.$m \'; \
|
|
for x in $$_cache_xtra_deps; do echo " _{SRCTOP}/$$x \\"; done; \
|
|
echo; for x in $$_new_dirdeps; do echo "_{SRCTOP}/$$x: _DIRDEP_USE"; done; } >&3
|
|
.endif
|
|
.else
|
|
${_this_dir}.$m: ${_build_dirs:M*.$m:N${_this_dir}.$m}
|
|
.endif
|
|
.endfor
|
|
|
|
.endif
|
|
|
|
# Now find more dependencies - and recurse.
|
|
.for d in ${_build_all_dirs}
|
|
.if !target(_dirdeps_checked.$d)
|
|
# once only
|
|
_dirdeps_checked.$d:
|
|
_dr := ${d:S,^${SRCTOP}/,,}
|
|
.if ${_debug_search}
|
|
.info checking ${_dr}
|
|
.endif
|
|
# Note: _build_all_dirs is fully qualifed so d:R is always the directory
|
|
.if exists(${d:R})
|
|
# we pass _DEP_TARGET_SPEC to tell the next step what we want
|
|
_DEP_TARGET_SPEC := ${d:E}
|
|
# some makefiles may still look at this
|
|
_DEP_MACHINE := ${d:E:C/,.*//}
|
|
# set these too in case Makefile.depend* uses them
|
|
.if ${TARGET_SPEC_VARS:[#]} > 1
|
|
_dtspec := ${_DEP_TARGET_SPEC:S/,/ /g}
|
|
.for i in ${_tspec_x}
|
|
DEP_${TARGET_SPEC_VARS:[$i]} := ${_dtspec:[$i]}
|
|
.endfor
|
|
.else
|
|
DEP_MACHINE := ${_DEP_MACHINE}
|
|
.endif
|
|
# Warning: there is an assumption here that MACHINE is always
|
|
# the first entry in TARGET_SPEC_VARS.
|
|
# If TARGET_SPEC and MACHINE are insufficient, you have a problem.
|
|
_m := ${.MAKE.DEPENDFILE_PREFERENCE:T:S;${TARGET_SPEC}$;${d:E};:C;${MACHINE}((,.+)?)$;${d:E:C/,.*//}\1;:@m@${exists(${d:R}/$m):?${d:R}/$m:}@:[1]}
|
|
.if !empty(_m)
|
|
# M_dep_qual_fixes isn't geared to Makefile.depend
|
|
_qm := ${_m:C;(\.depend)$;\1.${d:E};:${M_dep_qual_fixes:ts:}}
|
|
.if ${_debug_search}
|
|
.info Looking for ${_qm}
|
|
.endif
|
|
# set this "just in case"
|
|
# we can skip :tA since we computed the path above
|
|
DEP_RELDIR := ${_m:H:S,^${SRCTOP}/,,}
|
|
# and reset this
|
|
DIRDEPS =
|
|
.if ${_debug_reldir} && ${_qm} != ${_m}
|
|
.info loading ${_m:S,${SRCTOP}/,,} for ${_dr}
|
|
.endif
|
|
.include <${_m}>
|
|
.else
|
|
# set these as if we found Makefile.depend*
|
|
DEP_RELDIR := ${_dr:R}
|
|
DIRDEPS =
|
|
.if ${_debug_reldir}
|
|
.info loading local.dirdeps-missing.mk for ${_dr}
|
|
.endif
|
|
.-include <local.dirdeps-missing.mk>
|
|
.endif
|
|
.endif
|
|
.endif
|
|
.endfor
|
|
|
|
.endif # -V
|
|
.endif # BUILD_DIRDEPS
|
|
|
|
.elif ${.MAKE.LEVEL} > 42
|
|
.error You should have stopped recursing by now.
|
|
.else
|
|
# we are building something
|
|
DEP_RELDIR := ${RELDIR}
|
|
_DEP_RELDIR := ${RELDIR}
|
|
# Since we are/should be included by .MAKE.DEPENDFILE
|
|
# This is a final opportunity to add/hook global rules.
|
|
.-include <local.dirdeps-build.mk>
|
|
|
|
# skip _reldir_{finish,failed} if not included from Makefile.depend*
|
|
# or not in meta mode
|
|
.if !defined(WITHOUT_META_STATS) && ${.INCLUDEDFROMFILE:U:M${.MAKE.DEPENDFILE_PREFIX}*} != "" && ${.MAKE.MODE:Mmeta} != ""
|
|
|
|
meta_stats= meta=${empty(.MAKE.META.FILES):?0:${.MAKE.META.FILES:[#]}} \
|
|
created=${empty(.MAKE.META.CREATED):?0:${.MAKE.META.CREATED:[#]}}
|
|
|
|
.if !target(_reldir_finish)
|
|
.END: _reldir_finish
|
|
_reldir_finish: .NOMETA
|
|
@echo "${TRACER}Finished ${RELDIR}.${TARGET_SPEC} seconds=$$(( ${now_utc} - ${start_utc} )) ${meta_stats}"
|
|
.endif
|
|
|
|
.if !target(_reldir_failed)
|
|
.ERROR: _reldir_failed
|
|
_reldir_failed: .NOMETA
|
|
@echo "${TRACER}Failed ${RELDIR}.${TARGET_SPEC} seconds=$$(( ${now_utc} - ${start_utc} )) ${meta_stats}"
|
|
.endif
|
|
|
|
.endif
|
|
|
|
# pickup local dependencies
|
|
.if ${MAKE_VERSION} < 20160220
|
|
.-include <.depend>
|
|
.else
|
|
.dinclude <.depend>
|
|
.endif
|
|
.endif
|
|
|
|
# bootstrapping new dependencies made easy?
|
|
.if !target(bootstrap-empty)
|
|
.if !target(bootstrap) && (make(bootstrap) || \
|
|
make(bootstrap-this) || \
|
|
make(bootstrap-recurse) || \
|
|
make(bootstrap-empty))
|
|
|
|
# if we are bootstrapping create the default
|
|
_want = ${.CURDIR}/${.MAKE.DEPENDFILE_DEFAULT:T}
|
|
|
|
.if exists(${_want})
|
|
# stop here
|
|
${.TARGETS:Mboot*}:
|
|
.elif !make(bootstrap-empty)
|
|
# find a Makefile.depend to use as _src
|
|
_src != cd ${.CURDIR} && for m in ${.MAKE.DEPENDFILE_PREFERENCE:T:S,${MACHINE},*,}; do test -s $$m || continue; echo $$m; break; done; echo
|
|
.if empty(_src)
|
|
.error cannot find any of ${.MAKE.DEPENDFILE_PREFERENCE:T}${.newline}Use: bootstrap-empty
|
|
.endif
|
|
|
|
_src?= ${.MAKE.DEPENDFILE}
|
|
|
|
.MAKE.DEPENDFILE_BOOTSTRAP_SED+= -e 's/${_src:E:C/,.*//}/${MACHINE}/g'
|
|
|
|
# just create Makefile.depend* for this dir
|
|
bootstrap-this: .NOTMAIN
|
|
@echo Bootstrapping ${RELDIR}/${_want:T} from ${_src:T}; \
|
|
echo You need to build ${RELDIR} to correctly populate it.
|
|
.if ${_src:T} != ${.MAKE.DEPENDFILE_PREFIX:T}
|
|
(cd ${.CURDIR} && sed ${.MAKE.DEPENDFILE_BOOTSTRAP_SED} ${_src} > ${_want:T})
|
|
.else
|
|
cp ${.CURDIR}/${_src:T} ${_want}
|
|
.endif
|
|
|
|
# create Makefile.depend* for this dir and its dependencies
|
|
bootstrap: bootstrap-recurse
|
|
bootstrap-recurse: bootstrap-this
|
|
|
|
_mf := ${.PARSEFILE}
|
|
bootstrap-recurse: .NOTMAIN .MAKE
|
|
@cd ${SRCTOP} && \
|
|
for d in `cd ${RELDIR} && ${.MAKE} -B -f ${"${.MAKEFLAGS:M-n}":?${_src}:${.MAKE.DEPENDFILE:T}} -V DIRDEPS`; do \
|
|
test -d $$d || d=$${d%.*}; \
|
|
test -d $$d || continue; \
|
|
echo "Checking $$d for bootstrap ..."; \
|
|
(cd $$d && ${.MAKE} -f ${_mf} bootstrap-recurse); \
|
|
done
|
|
|
|
.endif
|
|
|
|
# create an empty Makefile.depend* to get the ball rolling.
|
|
bootstrap-empty: .NOTMAIN .NOMETA
|
|
@echo Creating empty ${RELDIR}/${_want:T}; \
|
|
echo You need to build ${RELDIR} to correctly populate it.
|
|
@{ echo DIRDEPS=; echo ".include <dirdeps.mk>"; } > ${_want}
|
|
|
|
.endif
|
|
.endif
|