freebsd-dev/sys/dev/aic7xxx/ahc_pci.c
Justin T. Gibbs cd036e891a ahc_pci.c:
If bus_dma will give us addresses > 32 bits, setup our dma tag
	to accept up to 39bit addresses.

aic7770.c:
	Update the softc directly rather than use an intermediate
	"probe_config" structure.

aic7xxx.c:
	Complete core work to support 39bit addresses for bulk data
	dma operations.  Controller data structures still must reside
	under the 4GB boundary to reduce code/data size in the sequencer
	and related data structures.  This has been tested under Linux
	IA64 and will be tested on IA64 for FreeBSD as soon as our port
	can run there.

	Add bus dmamap synchronization calls around manipulation of
	all controller/kernel shared host data structures.

	Implement data pointer reinitialation for a second data phase
	in a single connection in the kernel rather than bloat the
	sequencer.  This is an extremely rare operation (does it ever
	happen?) and the sequencer implementation was flawed for some
	of the newest chips.

	Don't ever allow our target role to initiate a PPR.  This
	is forbidden by the SCSI spec.

	Add a few missing endian conversions in the ignore wide pointers
	code.  The core has been tested on the PPC under Linux and should
	work for FreeBSD PPC.  As soon as I can test the OSM layer for
	FreeBSD PPC, I will.

	Move some of ahc_softc_init() into ahc_alloc() now that the
	probe_config structure is gone.

	Add a 4GB boundary condition on all of our dma tags.  32bit
	DAC under PCI only works on a single 4GB "page".  Although
	we can cross 4GB on a true 64bit bus, the card won't always
	be installed in one and we can save code space and cost in
	implementing high address support by assuming the high DWORD
	address will never change.

	Add diagnostics to ahc_search_qinfifo().

	Correct a target mode issue with bus resets.  To avoid an
	interrupt storm from a malicious third party holding the
	reset line, the sequencer would defer re-enabling the reset
	interrupt until either a select-out or select-in.  Unfortunately,
	the select-in enable bit is cleared by a bus reset, so a second
	reset will render the card deaf to an initiator's attempts to
	contact it.  We now re-enable bus reset interrupts immediately
	if the target role is enabled.

aic7xxx.h:
	Remove struct ahc_probe_config.

	SCB's now contain a pointer to the sg_map_node so we can perfrom
	bus dma sync operations on the SG list prior to queuing a command.

aic7xxx.reg:
	Register the Perforce ID for this file with the VERSION keyword
	so it is printed in generated files.

	Add the DSCOMMAND1 register which is used to access the high
	DWORD of address bits.

	Add the data pointer reinitialize sequencer interrupt code.

aic7xxx.seq:
	Register the Perforce ID for this file with the VERSION keyword
	so it is printed in generated files.

	Remove code to re-enable the bus reset interrupt after a select-in.
	In target mode we cannot defer this operation as ENSELI is cleared
	by a bus reset.

	Complete 39bit support.

	Generate a sequencer inteerrupt rather than handle the data
	pointers re-initialitation in the sequencer.

	Inline the "seen identify" assertion to save a few cycles.

	Short circuit the update of our residual data if we have
	fully completed a transfer.  The residual is correct from
	our last S/G load operation.

	Short circuit full SDPTR processing if the residual is 0.
	Just mark the transfer as complete.

aic7xxx_93cx6.c:
	Synchronize perforce IDs.

aic7xxx_freebsd.c:
	Complete untested 39bit support.

	Add missing endia conversions.

	Clear our residuals prior to starting a command.  The
	update residual code in the core only sets the residual
	if there is one.

aic7xxx_freebsd.h:
	Modeify ahc_dmamap_sync() macros to take an offset and a length.
	This is how sync operations are performed in NetBSD, and we should
	update our bus dma implementation to match.

aic7xxx_inline.h:
	Add data structure synchronization helper functions.

	Fix a bug in ahc_intr() where we would not clear our unsolicited
	interrupt counter after running our PCI interrupt handler.  This
	may have been the cause of the spurious PCI interrupt messages.

aic7xxx_pci.c:
	Adjust for loss of probe_config structure.

	Guard against bogus 9005 subdevice information as seen on some
	IBM MB configurations.

	Add 39bit address support.

MFC after: 10 days
2001-07-18 21:39:48 +00:00

262 lines
6.9 KiB
C

/*
* FreeBSD, PCI product support functions
*
* Copyright (c) 1995-2001 Justin T. Gibbs
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU Public License ("GPL").
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $Id$
*
* $FreeBSD$
*/
#include <dev/aic7xxx/aic7xxx_freebsd.h>
#define AHC_PCI_IOADDR PCIR_MAPS /* I/O Address */
#define AHC_PCI_MEMADDR (PCIR_MAPS + 4) /* Mem I/O Address */
static int ahc_pci_probe(device_t dev);
static int ahc_pci_attach(device_t dev);
static device_method_t ahc_pci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ahc_pci_probe),
DEVMETHOD(device_attach, ahc_pci_attach),
DEVMETHOD(device_detach, ahc_detach),
{ 0, 0 }
};
static driver_t ahc_pci_driver = {
"ahc",
ahc_pci_methods,
sizeof(struct ahc_softc)
};
static devclass_t ahc_devclass;
DRIVER_MODULE(ahc, pci, ahc_pci_driver, ahc_devclass, 0, 0);
DRIVER_MODULE(ahc, cardbus, ahc_pci_driver, ahc_devclass, 0, 0);
MODULE_DEPEND(ahc_pci, ahc, 1, 1, 1);
MODULE_VERSION(ahc_pci, 1);
static int
ahc_pci_probe(device_t dev)
{
struct ahc_pci_identity *entry;
entry = ahc_find_pci_device(dev);
if (entry != NULL) {
device_set_desc(dev, entry->name);
return (0);
}
return (ENXIO);
}
static int
ahc_pci_attach(device_t dev)
{
struct ahc_pci_identity *entry;
struct ahc_softc *ahc;
char *name;
int error;
entry = ahc_find_pci_device(dev);
if (entry == NULL)
return (ENXIO);
/*
* Allocate a softc for this card and
* set it up for attachment by our
* common detect routine.
*/
name = malloc(strlen(device_get_nameunit(dev)) + 1, M_DEVBUF, M_NOWAIT);
if (name == NULL)
return (ENOMEM);
strcpy(name, device_get_nameunit(dev));
ahc = ahc_alloc(dev, name);
if (ahc == NULL)
return (ENOMEM);
ahc_set_unit(ahc, device_get_unit(dev));
/*
* Should we bother disabling 39Bit addressing
* based on installed memory?
*/
if (sizeof(bus_addr_t) > 4)
ahc->flags |= AHC_39BIT_ADDRESSING;
/* Allocate a dmatag for our SCB DMA maps */
/* XXX Should be a child of the PCI bus dma tag */
error = bus_dma_tag_create(/*parent*/NULL, /*alignment*/1,
/*boundary*/0,
(ahc->flags & AHC_39BIT_ADDRESSING)
? 0x7FFFFFFFFF
: BUS_SPACE_MAXADDR_32BIT,
/*highaddr*/BUS_SPACE_MAXADDR,
/*filter*/NULL, /*filterarg*/NULL,
/*maxsize*/MAXBSIZE, /*nsegments*/AHC_NSEG,
/*maxsegsz*/AHC_MAXTRANSFER_SIZE,
/*flags*/BUS_DMA_ALLOCNOW,
&ahc->parent_dmat);
if (error != 0) {
printf("ahc_pci_attach: Could not allocate DMA tag "
"- error %d\n", error);
ahc_free(ahc);
return (ENOMEM);
}
ahc->dev_softc = dev;
error = ahc_pci_config(ahc, entry);
if (error != 0) {
ahc_free(ahc);
return (error);
}
ahc_attach(ahc);
return (0);
}
int
ahc_pci_map_registers(struct ahc_softc *ahc)
{
struct resource *regs;
u_int command;
int regs_type;
int regs_id;
command = ahc_pci_read_config(ahc->dev_softc, PCIR_COMMAND, /*bytes*/1);
regs = NULL;
regs_type = 0;
regs_id = 0;
#ifdef AHC_ALLOW_MEMIO
if ((command & PCIM_CMD_MEMEN) != 0) {
regs_type = SYS_RES_MEMORY;
regs_id = AHC_PCI_MEMADDR;
regs = bus_alloc_resource(ahc->dev_softc, regs_type,
&regs_id, 0, ~0, 1, RF_ACTIVE);
if (regs != NULL) {
ahc->tag = rman_get_bustag(regs);
ahc->bsh = rman_get_bushandle(regs);
/*
* Do a quick test to see if memory mapped
* I/O is functioning correctly.
*/
if (ahc_inb(ahc, HCNTRL) == 0xFF) {
device_printf(ahc->dev_softc,
"PCI Device %d:%d:%d failed memory "
"mapped test. Using PIO.\n",
ahc_get_pci_bus(ahc->dev_softc),
ahc_get_pci_slot(ahc->dev_softc),
ahc_get_pci_function(ahc->dev_softc));
bus_release_resource(ahc->dev_softc, regs_type,
regs_id, regs);
regs = NULL;
} else {
command &= ~PCIM_CMD_PORTEN;
ahc_pci_write_config(ahc->dev_softc,
PCIR_COMMAND,
command, /*bytes*/1);
}
}
}
#endif
if (regs == NULL && (command & PCIM_CMD_PORTEN) != 0) {
regs_type = SYS_RES_IOPORT;
regs_id = AHC_PCI_IOADDR;
regs = bus_alloc_resource(ahc->dev_softc, regs_type,
&regs_id, 0, ~0, 1, RF_ACTIVE);
if (regs != NULL) {
ahc->tag = rman_get_bustag(regs);
ahc->bsh = rman_get_bushandle(regs);
command &= ~PCIM_CMD_MEMEN;
ahc_pci_write_config(ahc->dev_softc, PCIR_COMMAND,
command, /*bytes*/1);
}
}
if (regs == NULL) {
device_printf(ahc->dev_softc,
"can't allocate register resources\n");
return (ENOMEM);
}
ahc->platform_data->regs_res_type = regs_type;
ahc->platform_data->regs_res_id = regs_id;
ahc->platform_data->regs = regs;
return (0);
}
int
ahc_pci_map_int(struct ahc_softc *ahc)
{
int zero;
zero = 0;
ahc->platform_data->irq =
bus_alloc_resource(ahc->dev_softc, SYS_RES_IRQ, &zero,
0, ~0, 1, RF_ACTIVE | RF_SHAREABLE);
if (ahc->platform_data->irq == NULL)
return (ENOMEM);
ahc->platform_data->irq_res_type = SYS_RES_IRQ;
return (0);
}
void
ahc_power_state_change(struct ahc_softc *ahc, ahc_power_state new_state)
{
uint32_t cap;
u_int cap_offset;
/*
* Traverse the capability list looking for
* the power management capability.
*/
cap = 0;
cap_offset = ahc_pci_read_config(ahc->dev_softc,
PCIR_CAP_PTR, /*bytes*/1);
while (cap_offset != 0) {
cap = ahc_pci_read_config(ahc->dev_softc,
cap_offset, /*bytes*/4);
if ((cap & 0xFF) == 1
&& ((cap >> 16) & 0x3) > 0) {
uint32_t pm_control;
pm_control = ahc_pci_read_config(ahc->dev_softc,
cap_offset + 4,
/*bytes*/4);
pm_control &= ~0x3;
pm_control |= new_state;
ahc_pci_write_config(ahc->dev_softc,
cap_offset + 4,
pm_control, /*bytes*/2);
break;
}
cap_offset = (cap >> 8) & 0xFF;
}
}