freebsd-dev/sys/mips/atheros/ar71xx_ehci.c
2014-03-02 02:49:20 +00:00

261 lines
6.9 KiB
C

/*-
* Copyright (c) 2008 Sam Leffler. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* AR71XX attachment driver for the USB Enhanced Host Controller.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_bus.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/rman.h>
#include <sys/condvar.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <machine/bus.h>
#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usb_core.h>
#include <dev/usb/usb_busdma.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/usb_util.h>
#include <dev/usb/usb_controller.h>
#include <dev/usb/usb_bus.h>
#include <dev/usb/controller/ehci.h>
#include <dev/usb/controller/ehcireg.h>
#include <mips/atheros/ar71xx_setup.h>
#include <mips/atheros/ar71xx_bus_space_reversed.h>
#define EHCI_HC_DEVSTR "AR71XX Integrated USB 2.0 controller"
struct ar71xx_ehci_softc {
ehci_softc_t base; /* storage for EHCI code */
};
static device_attach_t ar71xx_ehci_attach;
static device_detach_t ar71xx_ehci_detach;
bs_r_1_proto(reversed);
bs_w_1_proto(reversed);
static int
ar71xx_ehci_probe(device_t self)
{
device_set_desc(self, EHCI_HC_DEVSTR);
return (BUS_PROBE_NOWILDCARD);
}
static int
ar71xx_ehci_attach(device_t self)
{
struct ar71xx_ehci_softc *isc = device_get_softc(self);
ehci_softc_t *sc = &isc->base;
int err;
int rid;
/* initialise some bus fields */
sc->sc_bus.parent = self;
sc->sc_bus.devices = sc->sc_devices;
sc->sc_bus.devices_max = EHCI_MAX_DEVICES;
/* get all DMA memory */
if (usb_bus_mem_alloc_all(&sc->sc_bus,
USB_GET_DMA_TAG(self), &ehci_iterate_hw_softc)) {
return (ENOMEM);
}
sc->sc_bus.usbrev = USB_REV_2_0;
/* NB: hints fix the memory location and irq */
rid = 0;
sc->sc_io_res = bus_alloc_resource_any(self, SYS_RES_MEMORY, &rid, RF_ACTIVE);
if (!sc->sc_io_res) {
device_printf(self, "Could not map memory\n");
goto error;
}
/*
* Craft special resource for bus space ops that handle
* byte-alignment of non-word addresses.
*/
sc->sc_io_tag = ar71xx_bus_space_reversed;
sc->sc_io_hdl = rman_get_bushandle(sc->sc_io_res);
sc->sc_io_size = rman_get_size(sc->sc_io_res);
rid = 0;
sc->sc_irq_res = bus_alloc_resource_any(self, SYS_RES_IRQ, &rid,
RF_ACTIVE);
if (sc->sc_irq_res == NULL) {
device_printf(self, "Could not allocate irq\n");
goto error;
}
sc->sc_bus.bdev = device_add_child(self, "usbus", -1);
if (!sc->sc_bus.bdev) {
device_printf(self, "Could not add USB device\n");
goto error;
}
device_set_ivars(sc->sc_bus.bdev, &sc->sc_bus);
device_set_desc(sc->sc_bus.bdev, EHCI_HC_DEVSTR);
sprintf(sc->sc_vendor, "Atheros");
err = bus_setup_intr(self, sc->sc_irq_res, INTR_TYPE_BIO | INTR_MPSAFE,
NULL, (driver_intr_t *)ehci_interrupt, sc, &sc->sc_intr_hdl);
if (err) {
device_printf(self, "Could not setup irq, %d\n", err);
sc->sc_intr_hdl = NULL;
goto error;
}
/*
* Arrange to force Host mode, select big-endian byte alignment,
* and arrange to not terminate reset operations (the adapter
* will ignore it if we do but might as well save a reg write).
* Also, the controller has an embedded Transaction Translator
* which means port speed must be read from the Port Status
* register following a port enable.
*/
sc->sc_flags = EHCI_SCFLG_SETMODE;
switch (ar71xx_soc) {
case AR71XX_SOC_AR7241:
case AR71XX_SOC_AR7242:
case AR71XX_SOC_AR9130:
case AR71XX_SOC_AR9132:
case AR71XX_SOC_AR9330:
case AR71XX_SOC_AR9331:
case AR71XX_SOC_AR9341:
case AR71XX_SOC_AR9342:
case AR71XX_SOC_AR9344:
sc->sc_flags |= EHCI_SCFLG_TT | EHCI_SCFLG_NORESTERM;
break;
default:
/* fallthrough */
break;
}
/*
* ehci_reset() needs the correct offset to access the host controller
* registers. The AR724x/AR913x offsets aren't 0.
*/
sc->sc_offs = EHCI_CAPLENGTH(EREAD4(sc, EHCI_CAPLEN_HCIVERSION));
(void) ehci_reset(sc);
err = ehci_init(sc);
if (!err) {
err = device_probe_and_attach(sc->sc_bus.bdev);
}
if (err) {
device_printf(self, "USB init failed err=%d\n", err);
goto error;
}
return (0);
error:
ar71xx_ehci_detach(self);
return (ENXIO);
}
static int
ar71xx_ehci_detach(device_t self)
{
struct ar71xx_ehci_softc *isc = device_get_softc(self);
ehci_softc_t *sc = &isc->base;
device_t bdev;
int err;
if (sc->sc_bus.bdev) {
bdev = sc->sc_bus.bdev;
device_detach(bdev);
device_delete_child(self, bdev);
}
/* during module unload there are lots of children leftover */
device_delete_children(self);
if (sc->sc_irq_res && sc->sc_intr_hdl) {
/*
* only call ehci_detach() after ehci_init()
*/
ehci_detach(sc);
err = bus_teardown_intr(self, sc->sc_irq_res, sc->sc_intr_hdl);
if (err)
/* XXX or should we panic? */
device_printf(self, "Could not tear down irq, %d\n",
err);
sc->sc_intr_hdl = NULL;
}
if (sc->sc_irq_res) {
bus_release_resource(self, SYS_RES_IRQ, 0, sc->sc_irq_res);
sc->sc_irq_res = NULL;
}
if (sc->sc_io_res) {
bus_release_resource(self, SYS_RES_MEMORY, 0,
sc->sc_io_res);
sc->sc_io_res = NULL;
}
usb_bus_mem_free_all(&sc->sc_bus, &ehci_iterate_hw_softc);
return (0);
}
static device_method_t ehci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, ar71xx_ehci_probe),
DEVMETHOD(device_attach, ar71xx_ehci_attach),
DEVMETHOD(device_detach, ar71xx_ehci_detach),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD_END
};
static driver_t ehci_driver = {
.name = "ehci",
.methods = ehci_methods,
.size = sizeof(struct ar71xx_ehci_softc),
};
static devclass_t ehci_devclass;
DRIVER_MODULE(ehci, nexus, ehci_driver, ehci_devclass, 0, 0);
MODULE_DEPEND(ehci, usb, 1, 1, 1);