2701 lines
94 KiB
Plaintext
2701 lines
94 KiB
Plaintext
# $FreeBSD$
|
||
#
|
||
# NOTES -- Lines that can be cut/pasted into kernel and hints configs.
|
||
#
|
||
# Lines that begin with 'device', 'options', 'machine', 'ident', 'maxusers',
|
||
# 'makeoptions', 'hints', etc. go into the kernel configuration that you
|
||
# run config(8) with.
|
||
#
|
||
# Lines that begin with 'hint.' are NOT for config(8), they go into your
|
||
# hints file. See /boot/device.hints and/or the 'hints' config(8) directive.
|
||
#
|
||
# Please use ``make LINT'' to create an old-style LINT file if you want to
|
||
# do kernel test-builds.
|
||
#
|
||
# This file contains machine independent kernel configuration notes. For
|
||
# machine dependent notes, look in /sys/<arch>/conf/NOTES.
|
||
#
|
||
|
||
#
|
||
# NOTES conventions and style guide:
|
||
#
|
||
# Large block comments should begin and end with a line containing only a
|
||
# comment character.
|
||
#
|
||
# To describe a particular object, a block comment (if it exists) should
|
||
# come first. Next should come device, options, and hints lines in that
|
||
# order. All device and option lines must be described by a comment that
|
||
# doesn't just expand the device or option name. Use only a concise
|
||
# comment on the same line if possible. Very detailed descriptions of
|
||
# devices and subsystems belong in man pages.
|
||
#
|
||
# A space followed by a tab separates 'options' from an option name. Two
|
||
# spaces followed by a tab separate 'device' from a device name. Comments
|
||
# after an option or device should use one space after the comment character.
|
||
# To comment out a negative option that disables code and thus should not be
|
||
# enabled for LINT builds, precede 'options' with "#!".
|
||
#
|
||
|
||
#
|
||
# This is the ``identification'' of the kernel. Usually this should
|
||
# be the same as the name of your kernel.
|
||
#
|
||
ident LINT
|
||
|
||
#
|
||
# The `maxusers' parameter controls the static sizing of a number of
|
||
# internal system tables by a formula defined in subr_param.c.
|
||
# Omitting this parameter or setting it to 0 will cause the system to
|
||
# auto-size based on physical memory.
|
||
#
|
||
maxusers 10
|
||
|
||
#
|
||
# The `makeoptions' parameter allows variables to be passed to the
|
||
# generated Makefile in the build area.
|
||
#
|
||
# CONF_CFLAGS gives some extra compiler flags that are added to ${CFLAGS}
|
||
# after most other flags. Here we use it to inhibit use of non-optimal
|
||
# gcc built-in functions (e.g., memcmp).
|
||
#
|
||
# DEBUG happens to be magic.
|
||
# The following is equivalent to 'config -g KERNELNAME' and creates
|
||
# 'kernel.debug' compiled with -g debugging as well as a normal
|
||
# 'kernel'. Use 'make install.debug' to install the debug kernel
|
||
# but that isn't normally necessary as the debug symbols are not loaded
|
||
# by the kernel and are not useful there anyway.
|
||
#
|
||
# KERNEL can be overridden so that you can change the default name of your
|
||
# kernel.
|
||
#
|
||
# MODULES_OVERRIDE can be used to limit modules built to a specific list.
|
||
#
|
||
makeoptions CONF_CFLAGS=-fno-builtin #Don't allow use of memcmp, etc.
|
||
#makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
|
||
#makeoptions KERNEL=foo #Build kernel "foo" and install "/foo"
|
||
# Only build ext2fs module plus those parts of the sound system I need.
|
||
#makeoptions MODULES_OVERRIDE="ext2fs sound/sound sound/driver/maestro3"
|
||
makeoptions DESTDIR=/tmp
|
||
|
||
#
|
||
# FreeBSD processes are subject to certain limits to their consumption
|
||
# of system resources. See getrlimit(2) for more details. Each
|
||
# resource limit has two values, a "soft" limit and a "hard" limit.
|
||
# The soft limits can be modified during normal system operation, but
|
||
# the hard limits are set at boot time. Their default values are
|
||
# in sys/<arch>/include/vmparam.h. There are two ways to change them:
|
||
#
|
||
# 1. Set the values at kernel build time. The options below are one
|
||
# way to allow that limit to grow to 1GB. They can be increased
|
||
# further by changing the parameters:
|
||
#
|
||
# 2. In /boot/loader.conf, set the tunables kern.maxswzone,
|
||
# kern.maxbcache, kern.maxtsiz, kern.dfldsiz, kern.maxdsiz,
|
||
# kern.dflssiz, kern.maxssiz and kern.sgrowsiz.
|
||
#
|
||
# The options in /boot/loader.conf override anything in the kernel
|
||
# configuration file. See the function init_param1 in
|
||
# sys/kern/subr_param.c for more details.
|
||
#
|
||
|
||
options MAXDSIZ=(1024UL*1024*1024)
|
||
options MAXSSIZ=(128UL*1024*1024)
|
||
options DFLDSIZ=(1024UL*1024*1024)
|
||
|
||
#
|
||
# BLKDEV_IOSIZE sets the default block size used in user block
|
||
# device I/O. Note that this value will be overridden by the label
|
||
# when specifying a block device from a label with a non-0
|
||
# partition blocksize. The default is PAGE_SIZE.
|
||
#
|
||
options BLKDEV_IOSIZE=8192
|
||
|
||
#
|
||
# MAXPHYS and DFLTPHYS
|
||
#
|
||
# These are the max and default 'raw' I/O block device access sizes.
|
||
# Reads and writes will be split into DFLTPHYS chunks. Some applications
|
||
# have better performance with larger raw I/O access sizes. Typically
|
||
# MAXPHYS should be twice the size of DFLTPHYS. Note that certain VM
|
||
# parameters are derived from these values and making them too large
|
||
# can make an an unbootable kernel.
|
||
#
|
||
# The defaults are 64K and 128K respectively.
|
||
options DFLTPHYS=(64*1024)
|
||
options MAXPHYS=(128*1024)
|
||
|
||
|
||
# This allows you to actually store this configuration file into
|
||
# the kernel binary itself. See config(8) for more details.
|
||
#
|
||
options INCLUDE_CONFIG_FILE # Include this file in kernel
|
||
|
||
options GEOM_AES # Don't use, use GEOM_BDE
|
||
options GEOM_BDE # Disk encryption.
|
||
options GEOM_BSD # BSD disklabels
|
||
options GEOM_CACHE # Disk cache.
|
||
options GEOM_CONCAT # Disk concatenation.
|
||
options GEOM_ELI # Disk encryption.
|
||
options GEOM_FOX # Redundant path mitigation
|
||
options GEOM_GATE # Userland services.
|
||
options GEOM_JOURNAL # Journaling.
|
||
options GEOM_LABEL # Providers labelization.
|
||
options GEOM_LINUX_LVM # Linux LVM2 volumes
|
||
options GEOM_MBR # DOS/MBR partitioning
|
||
options GEOM_MIRROR # Disk mirroring.
|
||
options GEOM_MULTIPATH # Disk multipath
|
||
options GEOM_NOP # Test class.
|
||
options GEOM_PART_APM # Apple partitioning
|
||
options GEOM_PART_BSD # BSD disklabel
|
||
options GEOM_PART_EBR # Extended Boot Records
|
||
options GEOM_PART_GPT # GPT partitioning
|
||
options GEOM_PART_MBR # MBR partitioning
|
||
options GEOM_PART_PC98 # PC-9800 disk partitioning
|
||
options GEOM_PART_VTOC8 # SMI VTOC8 disk label
|
||
options GEOM_PC98 # NEC PC9800 partitioning
|
||
options GEOM_RAID3 # RAID3 functionality.
|
||
options GEOM_SHSEC # Shared secret.
|
||
options GEOM_STRIPE # Disk striping.
|
||
options GEOM_SUNLABEL # Sun/Solaris partitioning
|
||
options GEOM_UZIP # Read-only compressed disks
|
||
options GEOM_VIRSTOR # Virtual storage.
|
||
options GEOM_VOL # Volume names from UFS superblock
|
||
options GEOM_ZERO # Performance testing helper.
|
||
|
||
#
|
||
# The root device and filesystem type can be compiled in;
|
||
# this provides a fallback option if the root device cannot
|
||
# be correctly guessed by the bootstrap code, or an override if
|
||
# the RB_DFLTROOT flag (-r) is specified when booting the kernel.
|
||
#
|
||
options ROOTDEVNAME=\"ufs:da0s2e\"
|
||
|
||
|
||
#####################################################################
|
||
# Scheduler options:
|
||
#
|
||
# Specifying one of SCHED_4BSD or SCHED_ULE is mandatory. These options
|
||
# select which scheduler is compiled in.
|
||
#
|
||
# SCHED_4BSD is the historical, proven, BSD scheduler. It has a global run
|
||
# queue and no CPU affinity which makes it suboptimal for SMP. It has very
|
||
# good interactivity and priority selection.
|
||
#
|
||
# SCHED_ULE provides significant performance advantages over 4BSD on many
|
||
# workloads on SMP machines. It supports cpu-affinity, per-cpu runqueues
|
||
# and scheduler locks. It also has a stronger notion of interactivity
|
||
# which leads to better responsiveness even on uniprocessor machines. This
|
||
# will eventually become the default scheduler.
|
||
#
|
||
# SCHED_STATS is a debugging option which keeps some stats in the sysctl
|
||
# tree at 'kern.sched.stats' and is useful for debugging scheduling decisions.
|
||
#
|
||
options SCHED_4BSD
|
||
options SCHED_STATS
|
||
#options SCHED_ULE
|
||
|
||
#####################################################################
|
||
# SMP OPTIONS:
|
||
#
|
||
# SMP enables building of a Symmetric MultiProcessor Kernel.
|
||
|
||
# Mandatory:
|
||
options SMP # Symmetric MultiProcessor Kernel
|
||
|
||
# ADAPTIVE_MUTEXES changes the behavior of blocking mutexes to spin
|
||
# if the thread that currently owns the mutex is executing on another
|
||
# CPU. This behaviour is enabled by default, so this option can be used
|
||
# to disable it.
|
||
options NO_ADAPTIVE_MUTEXES
|
||
|
||
# ADAPTIVE_RWLOCKS changes the behavior of reader/writer locks to spin
|
||
# if the thread that currently owns the rwlock is executing on another
|
||
# CPU. This behaviour is enabled by default, so this option can be used
|
||
# to disable it.
|
||
options NO_ADAPTIVE_RWLOCKS
|
||
|
||
# ADAPTIVE_SX changes the behavior of sx locks to spin if the thread
|
||
# that currently owns the lock is executing on another CPU. Note that
|
||
# in addition to enabling this option, individual sx locks must be
|
||
# initialized with the SX_ADAPTIVESPIN flag.
|
||
options ADAPTIVE_SX
|
||
|
||
# MUTEX_NOINLINE forces mutex operations to call functions to perform each
|
||
# operation rather than inlining the simple cases. This can be used to
|
||
# shrink the size of the kernel text segment. Note that this behavior is
|
||
# already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING,
|
||
# and WITNESS options.
|
||
options MUTEX_NOINLINE
|
||
|
||
# RWLOCK_NOINLINE forces rwlock operations to call functions to perform each
|
||
# operation rather than inlining the simple cases. This can be used to
|
||
# shrink the size of the kernel text segment. Note that this behavior is
|
||
# already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING,
|
||
# and WITNESS options.
|
||
options RWLOCK_NOINLINE
|
||
|
||
# SX_NOINLINE forces sx lock operations to call functions to perform each
|
||
# operation rather than inlining the simple cases. This can be used to
|
||
# shrink the size of the kernel text segment. Note that this behavior is
|
||
# already implied by the INVARIANT_SUPPORT, INVARIANTS, KTR, LOCK_PROFILING,
|
||
# and WITNESS options.
|
||
options SX_NOINLINE
|
||
|
||
# SMP Debugging Options:
|
||
#
|
||
# PREEMPTION allows the threads that are in the kernel to be preempted by
|
||
# higher priority [interrupt] threads. It helps with interactivity
|
||
# and allows interrupt threads to run sooner rather than waiting.
|
||
# WARNING! Only tested on amd64 and i386.
|
||
# FULL_PREEMPTION instructs the kernel to preempt non-realtime kernel
|
||
# threads. Its sole use is to expose race conditions and other
|
||
# bugs during development. Enabling this option will reduce
|
||
# performance and increase the frequency of kernel panics by
|
||
# design. If you aren't sure that you need it then you don't.
|
||
# Relies on the PREEMPTION option. DON'T TURN THIS ON.
|
||
# MUTEX_DEBUG enables various extra assertions in the mutex code.
|
||
# SLEEPQUEUE_PROFILING enables rudimentary profiling of the hash table
|
||
# used to hold active sleep queues as well as sleep wait message
|
||
# frequency.
|
||
# TURNSTILE_PROFILING enables rudimentary profiling of the hash table
|
||
# used to hold active lock queues.
|
||
# WITNESS enables the witness code which detects deadlocks and cycles
|
||
# during locking operations.
|
||
# WITNESS_KDB causes the witness code to drop into the kernel debugger if
|
||
# a lock hierarchy violation occurs or if locks are held when going to
|
||
# sleep.
|
||
# WITNESS_SKIPSPIN disables the witness checks on spin mutexes.
|
||
options PREEMPTION
|
||
options FULL_PREEMPTION
|
||
options MUTEX_DEBUG
|
||
options WITNESS
|
||
options WITNESS_KDB
|
||
options WITNESS_SKIPSPIN
|
||
|
||
# LOCK_PROFILING - Profiling locks. See LOCK_PROFILING(9) for details.
|
||
options LOCK_PROFILING
|
||
# Set the number of buffers and the hash size. The hash size MUST be larger
|
||
# than the number of buffers. Hash size should be prime.
|
||
options MPROF_BUFFERS="1536"
|
||
options MPROF_HASH_SIZE="1543"
|
||
|
||
# Profiling for internal hash tables.
|
||
options SLEEPQUEUE_PROFILING
|
||
options TURNSTILE_PROFILING
|
||
|
||
|
||
#####################################################################
|
||
# COMPATIBILITY OPTIONS
|
||
|
||
#
|
||
# Implement system calls compatible with 4.3BSD and older versions of
|
||
# FreeBSD. You probably do NOT want to remove this as much current code
|
||
# still relies on the 4.3 emulation. Note that some architectures that
|
||
# are supported by FreeBSD do not include support for certain important
|
||
# aspects of this compatibility option, namely those related to the
|
||
# signal delivery mechanism.
|
||
#
|
||
options COMPAT_43
|
||
|
||
# Old tty interface.
|
||
options COMPAT_43TTY
|
||
|
||
# Enable FreeBSD4 compatibility syscalls
|
||
options COMPAT_FREEBSD4
|
||
|
||
# Enable FreeBSD5 compatibility syscalls
|
||
options COMPAT_FREEBSD5
|
||
|
||
# Enable FreeBSD6 compatibility syscalls
|
||
options COMPAT_FREEBSD6
|
||
|
||
# Enable FreeBSD7 compatibility syscalls
|
||
options COMPAT_FREEBSD7
|
||
|
||
#
|
||
# These three options provide support for System V Interface
|
||
# Definition-style interprocess communication, in the form of shared
|
||
# memory, semaphores, and message queues, respectively.
|
||
#
|
||
options SYSVSHM
|
||
options SYSVSEM
|
||
options SYSVMSG
|
||
|
||
|
||
#####################################################################
|
||
# DEBUGGING OPTIONS
|
||
|
||
#
|
||
# Compile with kernel debugger related code.
|
||
#
|
||
options KDB
|
||
|
||
#
|
||
# Print a stack trace of the current thread on the console for a panic.
|
||
#
|
||
options KDB_TRACE
|
||
|
||
#
|
||
# Don't enter the debugger for a panic. Intended for unattended operation
|
||
# where you may want to enter the debugger from the console, but still want
|
||
# the machine to recover from a panic.
|
||
#
|
||
options KDB_UNATTENDED
|
||
|
||
#
|
||
# Enable the ddb debugger backend.
|
||
#
|
||
options DDB
|
||
|
||
#
|
||
# Print the numerical value of symbols in addition to the symbolic
|
||
# representation.
|
||
#
|
||
options DDB_NUMSYM
|
||
|
||
#
|
||
# Enable the remote gdb debugger backend.
|
||
#
|
||
options GDB
|
||
|
||
#
|
||
# Enable the kernel DTrace hooks which are required to load the DTrace
|
||
# kernel modules.
|
||
#
|
||
options KDTRACE_HOOKS
|
||
|
||
#
|
||
# SYSCTL_DEBUG enables a 'sysctl' debug tree that can be used to dump the
|
||
# contents of the registered sysctl nodes on the console. It is disabled by
|
||
# default because it generates excessively verbose console output that can
|
||
# interfere with serial console operation.
|
||
#
|
||
options SYSCTL_DEBUG
|
||
|
||
#
|
||
# DEBUG_MEMGUARD builds and enables memguard(9), a replacement allocator
|
||
# for the kernel used to detect modify-after-free scenarios. See the
|
||
# memguard(9) man page for more information on usage.
|
||
#
|
||
options DEBUG_MEMGUARD
|
||
|
||
#
|
||
# DEBUG_REDZONE enables buffer underflows and buffer overflows detection for
|
||
# malloc(9).
|
||
#
|
||
options DEBUG_REDZONE
|
||
|
||
#
|
||
# KTRACE enables the system-call tracing facility ktrace(2). To be more
|
||
# SMP-friendly, KTRACE uses a worker thread to process most trace events
|
||
# asynchronously to the thread generating the event. This requires a
|
||
# pre-allocated store of objects representing trace events. The
|
||
# KTRACE_REQUEST_POOL option specifies the initial size of this store.
|
||
# The size of the pool can be adjusted both at boottime and runtime via
|
||
# the kern.ktrace_request_pool tunable and sysctl.
|
||
#
|
||
options KTRACE #kernel tracing
|
||
options KTRACE_REQUEST_POOL=101
|
||
|
||
#
|
||
# KTR is a kernel tracing mechanism imported from BSD/OS. Currently
|
||
# it has no userland interface aside from a few sysctl's. It is
|
||
# enabled with the KTR option. KTR_ENTRIES defines the number of
|
||
# entries in the circular trace buffer; it must be a power of two.
|
||
# KTR_COMPILE defines the mask of events to compile into the kernel as
|
||
# defined by the KTR_* constants in <sys/ktr.h>. KTR_MASK defines the
|
||
# initial value of the ktr_mask variable which determines at runtime
|
||
# what events to trace. KTR_CPUMASK determines which CPU's log
|
||
# events, with bit X corresponding to CPU X. KTR_VERBOSE enables
|
||
# dumping of KTR events to the console by default. This functionality
|
||
# can be toggled via the debug.ktr_verbose sysctl and defaults to off
|
||
# if KTR_VERBOSE is not defined.
|
||
#
|
||
options KTR
|
||
options KTR_ENTRIES=1024
|
||
options KTR_COMPILE=(KTR_INTR|KTR_PROC)
|
||
options KTR_MASK=KTR_INTR
|
||
options KTR_CPUMASK=0x3
|
||
options KTR_VERBOSE
|
||
|
||
#
|
||
# ALQ(9) is a facility for the asynchronous queuing of records from the kernel
|
||
# to a vnode, and is employed by services such as KTR(4) to produce trace
|
||
# files based on a kernel event stream. Records are written asynchronously
|
||
# in a worker thread.
|
||
#
|
||
options ALQ
|
||
options KTR_ALQ
|
||
|
||
#
|
||
# The INVARIANTS option is used in a number of source files to enable
|
||
# extra sanity checking of internal structures. This support is not
|
||
# enabled by default because of the extra time it would take to check
|
||
# for these conditions, which can only occur as a result of
|
||
# programming errors.
|
||
#
|
||
options INVARIANTS
|
||
|
||
#
|
||
# The INVARIANT_SUPPORT option makes us compile in support for
|
||
# verifying some of the internal structures. It is a prerequisite for
|
||
# 'INVARIANTS', as enabling 'INVARIANTS' will make these functions be
|
||
# called. The intent is that you can set 'INVARIANTS' for single
|
||
# source files (by changing the source file or specifying it on the
|
||
# command line) if you have 'INVARIANT_SUPPORT' enabled. Also, if you
|
||
# wish to build a kernel module with 'INVARIANTS', then adding
|
||
# 'INVARIANT_SUPPORT' to your kernel will provide all the necessary
|
||
# infrastructure without the added overhead.
|
||
#
|
||
options INVARIANT_SUPPORT
|
||
|
||
#
|
||
# The DIAGNOSTIC option is used to enable extra debugging information
|
||
# from some parts of the kernel. As this makes everything more noisy,
|
||
# it is disabled by default.
|
||
#
|
||
options DIAGNOSTIC
|
||
|
||
#
|
||
# REGRESSION causes optional kernel interfaces necessary only for regression
|
||
# testing to be enabled. These interfaces may constitute security risks
|
||
# when enabled, as they permit processes to easily modify aspects of the
|
||
# run-time environment to reproduce unlikely or unusual (possibly normally
|
||
# impossible) scenarios.
|
||
#
|
||
options REGRESSION
|
||
|
||
#
|
||
# RESTARTABLE_PANICS allows one to continue from a panic as if it were
|
||
# a call to the debugger to continue from a panic as instead. It is only
|
||
# useful if a kernel debugger is present. To restart from a panic, reset
|
||
# the panicstr variable to NULL and continue execution. This option is
|
||
# for development use only and should NOT be used in production systems
|
||
# to "workaround" a panic.
|
||
#
|
||
#options RESTARTABLE_PANICS
|
||
|
||
#
|
||
# This option let some drivers co-exist that can't co-exist in a running
|
||
# system. This is used to be able to compile all kernel code in one go for
|
||
# quality assurance purposes (like this file, which the option takes it name
|
||
# from.)
|
||
#
|
||
options COMPILING_LINT
|
||
|
||
#
|
||
# STACK enables the stack(9) facility, allowing the capture of kernel stack
|
||
# for the purpose of procinfo(1), etc. stack(9) will also be compiled in
|
||
# automatically if DDB(4) is compiled into the kernel.
|
||
#
|
||
options STACK
|
||
|
||
|
||
#####################################################################
|
||
# PERFORMANCE MONITORING OPTIONS
|
||
|
||
#
|
||
# The hwpmc driver that allows the use of in-CPU performance monitoring
|
||
# counters for performance monitoring. The base kernel needs to configured
|
||
# with the 'options' line, while the hwpmc device can be either compiled
|
||
# in or loaded as a loadable kernel module.
|
||
#
|
||
# Additional configuration options may be required on specific architectures,
|
||
# please see hwpmc(4).
|
||
|
||
device hwpmc # Driver (also a loadable module)
|
||
options HWPMC_HOOKS # Other necessary kernel hooks
|
||
|
||
|
||
#####################################################################
|
||
# NETWORKING OPTIONS
|
||
|
||
#
|
||
# Protocol families
|
||
#
|
||
options INET #Internet communications protocols
|
||
options INET6 #IPv6 communications protocols
|
||
|
||
options ROUTETABLES=2 # max 16. 1 is back compatible.
|
||
|
||
# In order to enable IPSEC you MUST also add device crypto to
|
||
# your kernel configuration
|
||
options IPSEC #IP security (requires device crypto)
|
||
#options IPSEC_DEBUG #debug for IP security
|
||
#
|
||
# Set IPSEC_FILTERTUNNEL to force packets coming through a tunnel
|
||
# to be processed by any configured packet filtering twice.
|
||
# The default is that packets coming out of a tunnel are _not_ processed;
|
||
# they are assumed trusted.
|
||
#
|
||
# IPSEC history is preserved for such packets, and can be filtered
|
||
# using ipfw(8)'s 'ipsec' keyword, when this option is enabled.
|
||
#
|
||
#options IPSEC_FILTERTUNNEL #filter ipsec packets from a tunnel
|
||
|
||
options IPX #IPX/SPX communications protocols
|
||
|
||
options NCP #NetWare Core protocol
|
||
|
||
options NETATALK #Appletalk communications protocols
|
||
options NETATALKDEBUG #Appletalk debugging
|
||
|
||
#
|
||
# SMB/CIFS requester
|
||
# NETSMB enables support for SMB protocol, it requires LIBMCHAIN and LIBICONV
|
||
# options.
|
||
options NETSMB #SMB/CIFS requester
|
||
|
||
# mchain library. It can be either loaded as KLD or compiled into kernel
|
||
options LIBMCHAIN
|
||
|
||
# libalias library, performing NAT
|
||
options LIBALIAS
|
||
|
||
#
|
||
# SCTP is a NEW transport protocol defined by
|
||
# RFC2960 updated by RFC3309 and RFC3758.. and
|
||
# soon to have a new base RFC and many many more
|
||
# extensions. This release supports all the extensions
|
||
# including many drafts (most about to become RFC's).
|
||
# It is the premeier SCTP implementation in the NET
|
||
# and is quite well tested.
|
||
#
|
||
# Note YOU MUST have both INET and INET6 defined.
|
||
# you don't have to enable V6, but SCTP is
|
||
# dual stacked and so far we have not teased apart
|
||
# the V6 and V4.. since an association can span
|
||
# both a V6 and V4 address at the SAME time :-)
|
||
#
|
||
options SCTP
|
||
# There are bunches of options:
|
||
# this one turns on all sorts of
|
||
# nastly printing that you can
|
||
# do. Its all controled by a
|
||
# bit mask (settable by socket opt and
|
||
# by sysctl). Including will not cause
|
||
# logging until you set the bits.. but it
|
||
# can be quite verbose.. so without this
|
||
# option we don't do any of the tests for
|
||
# bits and prints.. which makes the code run
|
||
# faster.. if you are not debugging don't use.
|
||
options SCTP_DEBUG
|
||
#
|
||
# This option turns off the CRC32c checksum. Basically
|
||
# You will not be able to talk to anyone else that
|
||
# has not done this. Its more for expermentation to
|
||
# see how much CPU the CRC32c really takes. Most new
|
||
# cards for TCP support checksum offload.. so this
|
||
# option gives you a "view" into what SCTP would be
|
||
# like with such an offload (which only exists in
|
||
# high in iSCSI boards so far). With the new
|
||
# splitting 8's algorithm its not as bad as it used
|
||
# to be.. but it does speed things up try only
|
||
# for in a captured lab environment :-)
|
||
options SCTP_WITH_NO_CSUM
|
||
#
|
||
|
||
#
|
||
# All that options after that turn on specific types of
|
||
# logging. You can monitor CWND growth, flight size
|
||
# and all sorts of things. Go look at the code and
|
||
# see. I have used this to produce interesting
|
||
# charts and graphs as well :->
|
||
#
|
||
# I have not yet commited the tools to get and print
|
||
# the logs, I will do that eventually .. before then
|
||
# if you want them send me an email rrs@freebsd.org
|
||
# You basically must have KTR enabled for these
|
||
# and you then set the sysctl to turn on/off various
|
||
# logging bits. Use ktrdump to pull the log and run
|
||
# it through a dispaly program.. and graphs and other
|
||
# things too.
|
||
#
|
||
options SCTP_LOCK_LOGGING
|
||
options SCTP_MBUF_LOGGING
|
||
options SCTP_MBCNT_LOGGING
|
||
options SCTP_PACKET_LOGGING
|
||
options SCTP_LTRACE_CHUNKS
|
||
options SCTP_LTRACE_ERRORS
|
||
|
||
|
||
# altq(9). Enable the base part of the hooks with the ALTQ option.
|
||
# Individual disciplines must be built into the base system and can not be
|
||
# loaded as modules at this point. ALTQ requires a stable TSC so if yours is
|
||
# broken or changes with CPU throttling then you must also have the ALTQ_NOPCC
|
||
# option.
|
||
options ALTQ
|
||
options ALTQ_CBQ # Class Based Queueing
|
||
options ALTQ_RED # Random Early Detection
|
||
options ALTQ_RIO # RED In/Out
|
||
options ALTQ_HFSC # Hierarchical Packet Scheduler
|
||
options ALTQ_CDNR # Traffic conditioner
|
||
options ALTQ_PRIQ # Priority Queueing
|
||
options ALTQ_NOPCC # Required if the TSC is unusable
|
||
options ALTQ_DEBUG
|
||
|
||
# IP optional behaviour.
|
||
# IP_NONLOCALBIND disables the check that bind() usually makes that the
|
||
# address is one that is assigned to an interface on this machine.
|
||
# It allows transparent proxies to pretend to be other machines.
|
||
# How the packet GET to that machine is a problem solved elsewhere,
|
||
# smart routers, ipfw fwd, etc.
|
||
options IP_NONLOCALBIND # Allow impersonation for proxies.
|
||
|
||
# netgraph(4). Enable the base netgraph code with the NETGRAPH option.
|
||
# Individual node types can be enabled with the corresponding option
|
||
# listed below; however, this is not strictly necessary as netgraph
|
||
# will automatically load the corresponding KLD module if the node type
|
||
# is not already compiled into the kernel. Each type below has a
|
||
# corresponding man page, e.g., ng_async(8).
|
||
options NETGRAPH # netgraph(4) system
|
||
options NETGRAPH_DEBUG # enable extra debugging, this
|
||
# affects netgraph(4) and nodes
|
||
# Node types
|
||
options NETGRAPH_ASYNC
|
||
options NETGRAPH_ATMLLC
|
||
options NETGRAPH_ATM_ATMPIF
|
||
options NETGRAPH_BLUETOOTH # ng_bluetooth(4)
|
||
options NETGRAPH_BLUETOOTH_BT3C # ng_bt3c(4)
|
||
options NETGRAPH_BLUETOOTH_HCI # ng_hci(4)
|
||
options NETGRAPH_BLUETOOTH_L2CAP # ng_l2cap(4)
|
||
options NETGRAPH_BLUETOOTH_SOCKET # ng_btsocket(4)
|
||
options NETGRAPH_BLUETOOTH_UBT # ng_ubt(4)
|
||
options NETGRAPH_BLUETOOTH_UBTBCMFW # ubtbcmfw(4)
|
||
options NETGRAPH_BPF
|
||
options NETGRAPH_BRIDGE
|
||
options NETGRAPH_CAR
|
||
options NETGRAPH_CISCO
|
||
options NETGRAPH_DEFLATE
|
||
options NETGRAPH_DEVICE
|
||
options NETGRAPH_ECHO
|
||
options NETGRAPH_EIFACE
|
||
options NETGRAPH_ETHER
|
||
options NETGRAPH_FEC
|
||
options NETGRAPH_FRAME_RELAY
|
||
options NETGRAPH_GIF
|
||
options NETGRAPH_GIF_DEMUX
|
||
options NETGRAPH_HOLE
|
||
options NETGRAPH_IFACE
|
||
options NETGRAPH_IP_INPUT
|
||
options NETGRAPH_IPFW
|
||
options NETGRAPH_KSOCKET
|
||
options NETGRAPH_L2TP
|
||
options NETGRAPH_LMI
|
||
# MPPC compression requires proprietary files (not included)
|
||
#options NETGRAPH_MPPC_COMPRESSION
|
||
options NETGRAPH_MPPC_ENCRYPTION
|
||
options NETGRAPH_NETFLOW
|
||
options NETGRAPH_NAT
|
||
options NETGRAPH_ONE2MANY
|
||
options NETGRAPH_PPP
|
||
options NETGRAPH_PPPOE
|
||
options NETGRAPH_PPTPGRE
|
||
options NETGRAPH_PRED1
|
||
options NETGRAPH_RFC1490
|
||
options NETGRAPH_SOCKET
|
||
options NETGRAPH_SPLIT
|
||
options NETGRAPH_SPPP
|
||
options NETGRAPH_TAG
|
||
options NETGRAPH_TCPMSS
|
||
options NETGRAPH_TEE
|
||
options NETGRAPH_UI
|
||
options NETGRAPH_VJC
|
||
|
||
# NgATM - Netgraph ATM
|
||
options NGATM_ATM
|
||
options NGATM_ATMBASE
|
||
options NGATM_SSCOP
|
||
options NGATM_SSCFU
|
||
options NGATM_UNI
|
||
options NGATM_CCATM
|
||
|
||
device mn # Munich32x/Falc54 Nx64kbit/sec cards.
|
||
|
||
#
|
||
# Network interfaces:
|
||
# The `loop' device is MANDATORY when networking is enabled.
|
||
device loop
|
||
|
||
# The `ether' device provides generic code to handle
|
||
# Ethernets; it is MANDATORY when an Ethernet device driver is
|
||
# configured or token-ring is enabled.
|
||
device ether
|
||
|
||
# The `vlan' device implements the VLAN tagging of Ethernet frames
|
||
# according to IEEE 802.1Q. It requires `device miibus'.
|
||
device vlan
|
||
|
||
# The `wlan' device provides generic code to support 802.11
|
||
# drivers, including host AP mode; it is MANDATORY for the wi,
|
||
# and ath drivers and will eventually be required by all 802.11 drivers.
|
||
device wlan
|
||
options IEEE80211_DEBUG #enable debugging msgs
|
||
options IEEE80211_AMPDU_AGE #age frames in AMPDU reorder q's
|
||
|
||
# The `wlan_wep', `wlan_tkip', and `wlan_ccmp' devices provide
|
||
# support for WEP, TKIP, and AES-CCMP crypto protocols optionally
|
||
# used with 802.11 devices that depend on the `wlan' module.
|
||
device wlan_wep
|
||
device wlan_ccmp
|
||
device wlan_tkip
|
||
|
||
# The `wlan_xauth' device provides support for external (i.e. user-mode)
|
||
# authenticators for use with 802.11 drivers that use the `wlan'
|
||
# module and support 802.1x and/or WPA security protocols.
|
||
device wlan_xauth
|
||
|
||
# The `wlan_acl' device provides a MAC-based access control mechanism
|
||
# for use with 802.11 drivers operating in ap mode and using the
|
||
# `wlan' module.
|
||
# The 'wlan_amrr' device provides AMRR transmit rate control algorithm
|
||
device wlan_acl
|
||
device wlan_amrr
|
||
|
||
# Generic TokenRing
|
||
device token
|
||
|
||
# The `fddi' device provides generic code to support FDDI.
|
||
device fddi
|
||
|
||
# The `arcnet' device provides generic code to support Arcnet.
|
||
device arcnet
|
||
|
||
# The `sppp' device serves a similar role for certain types
|
||
# of synchronous PPP links (like `cx', `ar').
|
||
device sppp
|
||
|
||
# The `sl' device implements the Serial Line IP (SLIP) service.
|
||
# The `ppp' device implements the Point-to-Point Protocol.
|
||
|
||
|
||
# The `bpf' device enables the Berkeley Packet Filter. Be
|
||
# aware of the legal and administrative consequences of enabling this
|
||
# option. The number of devices determines the maximum number of
|
||
# simultaneous BPF clients programs runnable. DHCP requires bpf.
|
||
device bpf
|
||
|
||
# The `disc' device implements a minimal network interface,
|
||
# which throws away all packets sent and never receives any. It is
|
||
# included for testing and benchmarking purposes.
|
||
device disc
|
||
|
||
# The `edsc' device implements a minimal Ethernet interface,
|
||
# which discards all packets sent and receives none.
|
||
device edsc
|
||
|
||
# The `tap' device is a pty-like virtual Ethernet interface
|
||
device tap
|
||
|
||
# The `tun' device implements (user-)ppp and nos-tun(8)
|
||
device tun
|
||
|
||
# The `gif' device implements IPv6 over IP4 tunneling,
|
||
# IPv4 over IPv6 tunneling, IPv4 over IPv4 tunneling and
|
||
# IPv6 over IPv6 tunneling.
|
||
# The `gre' device implements two types of IP4 over IP4 tunneling:
|
||
# GRE and MOBILE, as specified in the RFC1701 and RFC2004.
|
||
# The XBONEHACK option allows the same pair of addresses to be configured on
|
||
# multiple gif interfaces.
|
||
device gif
|
||
device gre
|
||
options XBONEHACK
|
||
|
||
# The `faith' device captures packets sent to it and diverts them
|
||
# to the IPv4/IPv6 translation daemon.
|
||
# The `stf' device implements 6to4 encapsulation.
|
||
device faith
|
||
device stf
|
||
|
||
# The `ef' device provides support for multiple ethernet frame types
|
||
# specified via ETHER_* options. See ef(4) for details.
|
||
device ef
|
||
options ETHER_II # enable Ethernet_II frame
|
||
options ETHER_8023 # enable Ethernet_802.3 (Novell) frame
|
||
options ETHER_8022 # enable Ethernet_802.2 frame
|
||
options ETHER_SNAP # enable Ethernet_802.2/SNAP frame
|
||
|
||
# The pf packet filter consists of three devices:
|
||
# The `pf' device provides /dev/pf and the firewall code itself.
|
||
# The `pflog' device provides the pflog0 interface which logs packets.
|
||
# The `pfsync' device provides the pfsync0 interface used for
|
||
# synchronization of firewall state tables (over the net).
|
||
device pf
|
||
device pflog
|
||
device pfsync
|
||
|
||
# Bridge interface.
|
||
device if_bridge
|
||
|
||
# Common Address Redundancy Protocol. See carp(4) for more details.
|
||
device carp
|
||
|
||
# IPsec interface.
|
||
device enc
|
||
|
||
# Link aggregation interface.
|
||
device lagg
|
||
|
||
#
|
||
# The PPP_BSDCOMP option enables support for compress(1) style entire
|
||
# packet compression, the PPP_DEFLATE is for zlib/gzip style compression.
|
||
# PPP_FILTER enables code for filtering the ppp data stream and selecting
|
||
# events for resetting the demand dial activity timer - requires bpf.
|
||
# See pppd(8) for more details.
|
||
#
|
||
|
||
|
||
#
|
||
# Internet family options:
|
||
#
|
||
# MROUTING enables the kernel multicast packet forwarder, which works
|
||
# with mrouted and XORP.
|
||
#
|
||
# IPFIREWALL enables support for IP firewall construction, in
|
||
# conjunction with the `ipfw' program. IPFIREWALL_VERBOSE sends
|
||
# logged packets to the system logger. IPFIREWALL_VERBOSE_LIMIT
|
||
# limits the number of times a matching entry can be logged.
|
||
#
|
||
# WARNING: IPFIREWALL defaults to a policy of "deny ip from any to any"
|
||
# and if you do not add other rules during startup to allow access,
|
||
# YOU WILL LOCK YOURSELF OUT. It is suggested that you set firewall_type=open
|
||
# in /etc/rc.conf when first enabling this feature, then refining the
|
||
# firewall rules in /etc/rc.firewall after you've tested that the new kernel
|
||
# feature works properly.
|
||
#
|
||
# IPFIREWALL_DEFAULT_TO_ACCEPT causes the default rule (at boot) to
|
||
# allow everything. Use with care, if a cracker can crash your
|
||
# firewall machine, they can get to your protected machines. However,
|
||
# if you are using it as an as-needed filter for specific problems as
|
||
# they arise, then this may be for you. Changing the default to 'allow'
|
||
# means that you won't get stuck if the kernel and /sbin/ipfw binary get
|
||
# out of sync.
|
||
#
|
||
# IPDIVERT enables the divert IP sockets, used by ``ipfw divert''. It
|
||
# depends on IPFIREWALL if compiled into the kernel.
|
||
#
|
||
# IPFIREWALL_FORWARD enables changing of the packet destination either
|
||
# to do some sort of policy routing or transparent proxying. Used by
|
||
# ``ipfw forward''. All redirections apply to locally generated
|
||
# packets too. Because of this great care is required when
|
||
# crafting the ruleset.
|
||
#
|
||
# IPFIREWALL_NAT adds support for in kernel nat in ipfw, and it requires
|
||
# LIBALIAS.
|
||
#
|
||
# IPSTEALTH enables code to support stealth forwarding (i.e., forwarding
|
||
# packets without touching the TTL). This can be useful to hide firewalls
|
||
# from traceroute and similar tools.
|
||
#
|
||
# TCPDEBUG enables code which keeps traces of the TCP state machine
|
||
# for sockets with the SO_DEBUG option set, which can then be examined
|
||
# using the trpt(8) utility.
|
||
#
|
||
options MROUTING # Multicast routing
|
||
options IPFIREWALL #firewall
|
||
options IPFIREWALL_VERBOSE #enable logging to syslogd(8)
|
||
options IPFIREWALL_VERBOSE_LIMIT=100 #limit verbosity
|
||
options IPFIREWALL_DEFAULT_TO_ACCEPT #allow everything by default
|
||
options IPFIREWALL_FORWARD #packet destination changes
|
||
options IPFIREWALL_NAT #ipfw kernel nat support
|
||
options IPDIVERT #divert sockets
|
||
options IPFILTER #ipfilter support
|
||
options IPFILTER_LOG #ipfilter logging
|
||
options IPFILTER_LOOKUP #ipfilter pools
|
||
options IPFILTER_DEFAULT_BLOCK #block all packets by default
|
||
options IPSTEALTH #support for stealth forwarding
|
||
options TCPDEBUG
|
||
|
||
# The MBUF_STRESS_TEST option enables options which create
|
||
# various random failures / extreme cases related to mbuf
|
||
# functions. See mbuf(9) for a list of available test cases.
|
||
# MBUF_PROFILING enables code to profile the mbuf chains
|
||
# exiting the system (via participating interfaces) and
|
||
# return a logarithmic histogram of monitored parameters
|
||
# (e.g. packet size, wasted space, number of mbufs in chain).
|
||
options MBUF_STRESS_TEST
|
||
options MBUF_PROFILING
|
||
|
||
# Statically Link in accept filters
|
||
options ACCEPT_FILTER_DATA
|
||
options ACCEPT_FILTER_DNS
|
||
options ACCEPT_FILTER_HTTP
|
||
|
||
# TCP_SIGNATURE adds support for RFC 2385 (TCP-MD5) digests. These are
|
||
# carried in TCP option 19. This option is commonly used to protect
|
||
# TCP sessions (e.g. BGP) where IPSEC is not available nor desirable.
|
||
# This is enabled on a per-socket basis using the TCP_MD5SIG socket option.
|
||
# This requires the use of 'device crypto', 'options IPSEC'
|
||
# or 'device cryptodev'.
|
||
options TCP_SIGNATURE #include support for RFC 2385
|
||
|
||
# DUMMYNET enables the "dummynet" bandwidth limiter. You need IPFIREWALL
|
||
# as well. See dummynet(4) and ipfw(8) for more info. When you run
|
||
# DUMMYNET it is advisable to also have at least "options HZ=1000" to achieve
|
||
# a smooth scheduling of the traffic.
|
||
options DUMMYNET
|
||
|
||
# Zero copy sockets support. This enables "zero copy" for sending and
|
||
# receiving data via a socket. The send side works for any type of NIC,
|
||
# the receive side only works for NICs that support MTUs greater than the
|
||
# page size of your architecture and that support header splitting. See
|
||
# zero_copy(9) for more details.
|
||
options ZERO_COPY_SOCKETS
|
||
|
||
|
||
#####################################################################
|
||
# FILESYSTEM OPTIONS
|
||
|
||
#
|
||
# Only the root, /usr, and /tmp filesystems need be statically
|
||
# compiled; everything else will be automatically loaded at mount
|
||
# time. (Exception: the UFS family--- FFS --- cannot
|
||
# currently be demand-loaded.) Some people still prefer to statically
|
||
# compile other filesystems as well.
|
||
#
|
||
# NB: The PORTAL filesystem is known to be buggy, and WILL panic your
|
||
# system if you attempt to do anything with it. It is included here
|
||
# as an incentive for some enterprising soul to sit down and fix it.
|
||
# The UNION filesystem was known to be buggy in the past. It is now
|
||
# being actively maintained, although there are still some issues being
|
||
# resolved.
|
||
#
|
||
|
||
# One of these is mandatory:
|
||
options FFS #Fast filesystem
|
||
options NFSCLIENT #Network File System client
|
||
|
||
# The rest are optional:
|
||
options CD9660 #ISO 9660 filesystem
|
||
options FDESCFS #File descriptor filesystem
|
||
options HPFS #OS/2 File system
|
||
options MSDOSFS #MS DOS File System (FAT, FAT32)
|
||
options NFSSERVER #Network File System server
|
||
options NFSLOCKD #Network Lock Manager
|
||
|
||
# NT File System. Read-mostly, see mount_ntfs(8) for details.
|
||
# For a full read-write NTFS support consider sysutils/fusefs-ntfs
|
||
# port/package.
|
||
options NTFS
|
||
|
||
options NULLFS #NULL filesystem
|
||
# Broken (depends on NCP):
|
||
#options NWFS #NetWare filesystem
|
||
options PORTALFS #Portal filesystem
|
||
options PROCFS #Process filesystem (requires PSEUDOFS)
|
||
options PSEUDOFS #Pseudo-filesystem framework
|
||
options PSEUDOFS_TRACE #Debugging support for PSEUDOFS
|
||
options SMBFS #SMB/CIFS filesystem
|
||
options UDF #Universal Disk Format
|
||
options UNIONFS #Union filesystem
|
||
# The xFS_ROOT options REQUIRE the associated ``options xFS''
|
||
options NFS_ROOT #NFS usable as root device
|
||
|
||
# Soft updates is a technique for improving filesystem speed and
|
||
# making abrupt shutdown less risky.
|
||
#
|
||
options SOFTUPDATES
|
||
|
||
# Extended attributes allow additional data to be associated with files,
|
||
# and is used for ACLs, Capabilities, and MAC labels.
|
||
# See src/sys/ufs/ufs/README.extattr for more information.
|
||
options UFS_EXTATTR
|
||
options UFS_EXTATTR_AUTOSTART
|
||
|
||
# Access Control List support for UFS filesystems. The current ACL
|
||
# implementation requires extended attribute support, UFS_EXTATTR,
|
||
# for the underlying filesystem.
|
||
# See src/sys/ufs/ufs/README.acls for more information.
|
||
options UFS_ACL
|
||
|
||
# Directory hashing improves the speed of operations on very large
|
||
# directories at the expense of some memory.
|
||
options UFS_DIRHASH
|
||
|
||
# Gjournal-based UFS journaling support.
|
||
options UFS_GJOURNAL
|
||
|
||
# Make space in the kernel for a root filesystem on a md device.
|
||
# Define to the number of kilobytes to reserve for the filesystem.
|
||
options MD_ROOT_SIZE=10
|
||
|
||
# Make the md device a potential root device, either with preloaded
|
||
# images of type mfs_root or md_root.
|
||
options MD_ROOT
|
||
|
||
# Disk quotas are supported when this option is enabled.
|
||
options QUOTA #enable disk quotas
|
||
|
||
# If you are running a machine just as a fileserver for PC and MAC
|
||
# users, using SAMBA or Netatalk, you may consider setting this option
|
||
# and keeping all those users' directories on a filesystem that is
|
||
# mounted with the suiddir option. This gives new files the same
|
||
# ownership as the directory (similar to group). It's a security hole
|
||
# if you let these users run programs, so confine it to file-servers
|
||
# (but it'll save you lots of headaches in those cases). Root owned
|
||
# directories are exempt and X bits are cleared. The suid bit must be
|
||
# set on the directory as well; see chmod(1) PC owners can't see/set
|
||
# ownerships so they keep getting their toes trodden on. This saves
|
||
# you all the support calls as the filesystem it's used on will act as
|
||
# they expect: "It's my dir so it must be my file".
|
||
#
|
||
options SUIDDIR
|
||
|
||
# NFS options:
|
||
options NFS_MINATTRTIMO=3 # VREG attrib cache timeout in sec
|
||
options NFS_MAXATTRTIMO=60
|
||
options NFS_MINDIRATTRTIMO=30 # VDIR attrib cache timeout in sec
|
||
options NFS_MAXDIRATTRTIMO=60
|
||
options NFS_GATHERDELAY=10 # Default write gather delay (msec)
|
||
options NFS_WDELAYHASHSIZ=16 # and with this
|
||
options NFS_DEBUG # Enable NFS Debugging
|
||
|
||
# Coda stuff:
|
||
options CODA #CODA filesystem.
|
||
device vcoda #coda minicache <-> venus comm.
|
||
# Use the old Coda 5.x venus<->kernel interface instead of the new
|
||
# realms-aware 6.x protocol.
|
||
#options CODA_COMPAT_5
|
||
|
||
#
|
||
# Add support for the EXT2FS filesystem of Linux fame. Be a bit
|
||
# careful with this - the ext2fs code has a tendency to lag behind
|
||
# changes and not be exercised very much, so mounting read/write could
|
||
# be dangerous (and even mounting read only could result in panics.)
|
||
#
|
||
options EXT2FS
|
||
|
||
#
|
||
# Add support for the ReiserFS filesystem (used in Linux). Currently,
|
||
# this is limited to read-only access.
|
||
#
|
||
options REISERFS
|
||
|
||
#
|
||
# Add support for the SGI XFS filesystem. Currently,
|
||
# this is limited to read-only access.
|
||
#
|
||
options XFS
|
||
|
||
# Use real implementations of the aio_* system calls. There are numerous
|
||
# stability and security issues in the current aio code that make it
|
||
# unsuitable for inclusion on machines with untrusted local users.
|
||
options VFS_AIO
|
||
|
||
# Cryptographically secure random number generator; /dev/random
|
||
device random
|
||
|
||
# The system memory devices; /dev/mem, /dev/kmem
|
||
device mem
|
||
|
||
# Optional character code conversion support with LIBICONV.
|
||
# Each option requires their base file system and LIBICONV.
|
||
options CD9660_ICONV
|
||
options MSDOSFS_ICONV
|
||
options NTFS_ICONV
|
||
options UDF_ICONV
|
||
|
||
|
||
#####################################################################
|
||
# POSIX P1003.1B
|
||
|
||
# Real time extensions added in the 1993 POSIX
|
||
# _KPOSIX_PRIORITY_SCHEDULING: Build in _POSIX_PRIORITY_SCHEDULING
|
||
|
||
options _KPOSIX_PRIORITY_SCHEDULING
|
||
# p1003_1b_semaphores are very experimental,
|
||
# user should be ready to assist in debugging if problems arise.
|
||
options P1003_1B_SEMAPHORES
|
||
|
||
# POSIX message queue
|
||
options P1003_1B_MQUEUE
|
||
|
||
#####################################################################
|
||
# SECURITY POLICY PARAMETERS
|
||
|
||
# Support for BSM audit
|
||
options AUDIT
|
||
|
||
# Support for Mandatory Access Control (MAC):
|
||
options MAC
|
||
options MAC_BIBA
|
||
options MAC_BSDEXTENDED
|
||
options MAC_IFOFF
|
||
options MAC_LOMAC
|
||
options MAC_MLS
|
||
options MAC_NONE
|
||
options MAC_PARTITION
|
||
options MAC_PORTACL
|
||
options MAC_SEEOTHERUIDS
|
||
options MAC_STUB
|
||
options MAC_TEST
|
||
|
||
|
||
#####################################################################
|
||
# CLOCK OPTIONS
|
||
|
||
# The granularity of operation is controlled by the kernel option HZ whose
|
||
# default value (1000 on most architectures) means a granularity of 1ms
|
||
# (1s/HZ). Historically, the default was 100, but finer granularity is
|
||
# required for DUMMYNET and other systems on modern hardware. There are
|
||
# reasonable arguments that HZ should, in fact, be 100 still; consider,
|
||
# that reducing the granularity too much might cause excessive overhead in
|
||
# clock interrupt processing, potentially causing ticks to be missed and thus
|
||
# actually reducing the accuracy of operation.
|
||
|
||
options HZ=100
|
||
|
||
# Enable support for the kernel PLL to use an external PPS signal,
|
||
# under supervision of [x]ntpd(8)
|
||
# More info in ntpd documentation: http://www.eecis.udel.edu/~ntp
|
||
|
||
options PPS_SYNC
|
||
|
||
|
||
#####################################################################
|
||
# SCSI DEVICES
|
||
|
||
# SCSI DEVICE CONFIGURATION
|
||
|
||
# The SCSI subsystem consists of the `base' SCSI code, a number of
|
||
# high-level SCSI device `type' drivers, and the low-level host-adapter
|
||
# device drivers. The host adapters are listed in the ISA and PCI
|
||
# device configuration sections below.
|
||
#
|
||
# It is possible to wire down your SCSI devices so that a given bus,
|
||
# target, and LUN always come on line as the same device unit. In
|
||
# earlier versions the unit numbers were assigned in the order that
|
||
# the devices were probed on the SCSI bus. This means that if you
|
||
# removed a disk drive, you may have had to rewrite your /etc/fstab
|
||
# file, and also that you had to be careful when adding a new disk
|
||
# as it may have been probed earlier and moved your device configuration
|
||
# around. (See also option GEOM_VOL for a different solution to this
|
||
# problem.)
|
||
|
||
# This old behavior is maintained as the default behavior. The unit
|
||
# assignment begins with the first non-wired down unit for a device
|
||
# type. For example, if you wire a disk as "da3" then the first
|
||
# non-wired disk will be assigned da4.
|
||
|
||
# The syntax for wiring down devices is:
|
||
|
||
hint.scbus.0.at="ahc0"
|
||
hint.scbus.1.at="ahc1"
|
||
hint.scbus.1.bus="0"
|
||
hint.scbus.3.at="ahc2"
|
||
hint.scbus.3.bus="0"
|
||
hint.scbus.2.at="ahc2"
|
||
hint.scbus.2.bus="1"
|
||
hint.da.0.at="scbus0"
|
||
hint.da.0.target="0"
|
||
hint.da.0.unit="0"
|
||
hint.da.1.at="scbus3"
|
||
hint.da.1.target="1"
|
||
hint.da.2.at="scbus2"
|
||
hint.da.2.target="3"
|
||
hint.sa.1.at="scbus1"
|
||
hint.sa.1.target="6"
|
||
|
||
# "units" (SCSI logical unit number) that are not specified are
|
||
# treated as if specified as LUN 0.
|
||
|
||
# All SCSI devices allocate as many units as are required.
|
||
|
||
# The ch driver drives SCSI Media Changer ("jukebox") devices.
|
||
#
|
||
# The da driver drives SCSI Direct Access ("disk") and Optical Media
|
||
# ("WORM") devices.
|
||
#
|
||
# The sa driver drives SCSI Sequential Access ("tape") devices.
|
||
#
|
||
# The cd driver drives SCSI Read Only Direct Access ("cd") devices.
|
||
#
|
||
# The ses driver drives SCSI Environment Services ("ses") and
|
||
# SAF-TE ("SCSI Accessible Fault-Tolerant Enclosure") devices.
|
||
#
|
||
# The pt driver drives SCSI Processor devices.
|
||
#
|
||
# The sg driver provides a passthrough API that is compatible with the
|
||
# Linux SG driver. It will work in conjunction with the COMPAT_LINUX
|
||
# option to run linux SG apps. It can also stand on its own and provide
|
||
# source level API compatiblity for porting apps to FreeBSD.
|
||
#
|
||
# Target Mode support is provided here but also requires that a SIM
|
||
# (SCSI Host Adapter Driver) provide support as well.
|
||
#
|
||
# The targ driver provides target mode support as a Processor type device.
|
||
# It exists to give the minimal context necessary to respond to Inquiry
|
||
# commands. There is a sample user application that shows how the rest
|
||
# of the command support might be done in /usr/share/examples/scsi_target.
|
||
#
|
||
# The targbh driver provides target mode support and exists to respond
|
||
# to incoming commands that do not otherwise have a logical unit assigned
|
||
# to them.
|
||
#
|
||
# The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI
|
||
# configuration as the "pass" driver.
|
||
|
||
device scbus #base SCSI code
|
||
device ch #SCSI media changers
|
||
device da #SCSI direct access devices (aka disks)
|
||
device sa #SCSI tapes
|
||
device cd #SCSI CD-ROMs
|
||
device ses #SCSI Environmental Services (and SAF-TE)
|
||
device pt #SCSI processor
|
||
device targ #SCSI Target Mode Code
|
||
device targbh #SCSI Target Mode Blackhole Device
|
||
device pass #CAM passthrough driver
|
||
device sg #Linux SCSI passthrough
|
||
|
||
# CAM OPTIONS:
|
||
# debugging options:
|
||
# -- NOTE -- If you specify one of the bus/target/lun options, you must
|
||
# specify them all!
|
||
# CAMDEBUG: When defined enables debugging macros
|
||
# CAM_DEBUG_BUS: Debug the given bus. Use -1 to debug all busses.
|
||
# CAM_DEBUG_TARGET: Debug the given target. Use -1 to debug all targets.
|
||
# CAM_DEBUG_LUN: Debug the given lun. Use -1 to debug all luns.
|
||
# CAM_DEBUG_FLAGS: OR together CAM_DEBUG_INFO, CAM_DEBUG_TRACE,
|
||
# CAM_DEBUG_SUBTRACE, and CAM_DEBUG_CDB
|
||
#
|
||
# CAM_MAX_HIGHPOWER: Maximum number of concurrent high power (start unit) cmds
|
||
# SCSI_NO_SENSE_STRINGS: When defined disables sense descriptions
|
||
# SCSI_NO_OP_STRINGS: When defined disables opcode descriptions
|
||
# SCSI_DELAY: The number of MILLISECONDS to freeze the SIM (scsi adapter)
|
||
# queue after a bus reset, and the number of milliseconds to
|
||
# freeze the device queue after a bus device reset. This
|
||
# can be changed at boot and runtime with the
|
||
# kern.cam.scsi_delay tunable/sysctl.
|
||
options CAMDEBUG
|
||
options CAM_DEBUG_BUS=-1
|
||
options CAM_DEBUG_TARGET=-1
|
||
options CAM_DEBUG_LUN=-1
|
||
options CAM_DEBUG_FLAGS=(CAM_DEBUG_INFO|CAM_DEBUG_TRACE|CAM_DEBUG_CDB)
|
||
options CAM_MAX_HIGHPOWER=4
|
||
options SCSI_NO_SENSE_STRINGS
|
||
options SCSI_NO_OP_STRINGS
|
||
options SCSI_DELAY=5000 # Be pessimistic about Joe SCSI device
|
||
|
||
# Options for the CAM CDROM driver:
|
||
# CHANGER_MIN_BUSY_SECONDS: Guaranteed minimum time quantum for a changer LUN
|
||
# CHANGER_MAX_BUSY_SECONDS: Maximum time quantum per changer LUN, only
|
||
# enforced if there is I/O waiting for another LUN
|
||
# The compiled in defaults for these variables are 2 and 10 seconds,
|
||
# respectively.
|
||
#
|
||
# These can also be changed on the fly with the following sysctl variables:
|
||
# kern.cam.cd.changer.min_busy_seconds
|
||
# kern.cam.cd.changer.max_busy_seconds
|
||
#
|
||
options CHANGER_MIN_BUSY_SECONDS=2
|
||
options CHANGER_MAX_BUSY_SECONDS=10
|
||
|
||
# Options for the CAM sequential access driver:
|
||
# SA_IO_TIMEOUT: Timeout for read/write/wfm operations, in minutes
|
||
# SA_SPACE_TIMEOUT: Timeout for space operations, in minutes
|
||
# SA_REWIND_TIMEOUT: Timeout for rewind operations, in minutes
|
||
# SA_ERASE_TIMEOUT: Timeout for erase operations, in minutes
|
||
# SA_1FM_AT_EOD: Default to model which only has a default one filemark at EOT.
|
||
options SA_IO_TIMEOUT=4
|
||
options SA_SPACE_TIMEOUT=60
|
||
options SA_REWIND_TIMEOUT=(2*60)
|
||
options SA_ERASE_TIMEOUT=(4*60)
|
||
options SA_1FM_AT_EOD
|
||
|
||
# Optional timeout for the CAM processor target (pt) device
|
||
# This is specified in seconds. The default is 60 seconds.
|
||
options SCSI_PT_DEFAULT_TIMEOUT=60
|
||
|
||
# Optional enable of doing SES passthrough on other devices (e.g., disks)
|
||
#
|
||
# Normally disabled because a lot of newer SCSI disks report themselves
|
||
# as having SES capabilities, but this can then clot up attempts to build
|
||
# build a topology with the SES device that's on the box these drives
|
||
# are in....
|
||
options SES_ENABLE_PASSTHROUGH
|
||
|
||
|
||
#####################################################################
|
||
# MISCELLANEOUS DEVICES AND OPTIONS
|
||
|
||
device pty #BSD-style compatibility pseudo ttys
|
||
device nmdm #back-to-back tty devices
|
||
device md #Memory/malloc disk
|
||
device snp #Snoop device - to look at pty/vty/etc..
|
||
device ccd #Concatenated disk driver
|
||
device firmware #firmware(9) support
|
||
|
||
# Kernel side iconv library
|
||
options LIBICONV
|
||
|
||
# Size of the kernel message buffer. Should be N * pagesize.
|
||
options MSGBUF_SIZE=40960
|
||
|
||
|
||
#####################################################################
|
||
# HARDWARE DEVICE CONFIGURATION
|
||
|
||
# For ISA the required hints are listed.
|
||
# EISA, MCA, PCI, CardBus, SD/MMC and pccard are self identifying buses, so
|
||
# no hints are needed.
|
||
|
||
#
|
||
# Mandatory devices:
|
||
#
|
||
|
||
# These options are valid for other keyboard drivers as well.
|
||
options KBD_DISABLE_KEYMAP_LOAD # refuse to load a keymap
|
||
options KBD_INSTALL_CDEV # install a CDEV entry in /dev
|
||
|
||
options FB_DEBUG # Frame buffer debugging
|
||
|
||
device splash # Splash screen and screen saver support
|
||
|
||
# Various screen savers.
|
||
device blank_saver
|
||
device daemon_saver
|
||
device dragon_saver
|
||
device fade_saver
|
||
device fire_saver
|
||
device green_saver
|
||
device logo_saver
|
||
device rain_saver
|
||
device snake_saver
|
||
device star_saver
|
||
device warp_saver
|
||
|
||
# The syscons console driver (SCO color console compatible).
|
||
device sc
|
||
hint.sc.0.at="isa"
|
||
options MAXCONS=16 # number of virtual consoles
|
||
options SC_ALT_MOUSE_IMAGE # simplified mouse cursor in text mode
|
||
options SC_DFLT_FONT # compile font in
|
||
makeoptions SC_DFLT_FONT=cp850
|
||
options SC_DISABLE_KDBKEY # disable `debug' key
|
||
options SC_DISABLE_REBOOT # disable reboot key sequence
|
||
options SC_HISTORY_SIZE=200 # number of history buffer lines
|
||
options SC_MOUSE_CHAR=0x3 # char code for text mode mouse cursor
|
||
options SC_PIXEL_MODE # add support for the raster text mode
|
||
|
||
# The following options will let you change the default colors of syscons.
|
||
options SC_NORM_ATTR=(FG_GREEN|BG_BLACK)
|
||
options SC_NORM_REV_ATTR=(FG_YELLOW|BG_GREEN)
|
||
options SC_KERNEL_CONS_ATTR=(FG_RED|BG_BLACK)
|
||
options SC_KERNEL_CONS_REV_ATTR=(FG_BLACK|BG_RED)
|
||
|
||
# The following options will let you change the default behaviour of
|
||
# cut-n-paste feature
|
||
options SC_CUT_SPACES2TABS # convert leading spaces into tabs
|
||
options SC_CUT_SEPCHARS=\"x09\" # set of characters that delimit words
|
||
# (default is single space - \"x20\")
|
||
|
||
# If you have a two button mouse, you may want to add the following option
|
||
# to use the right button of the mouse to paste text.
|
||
options SC_TWOBUTTON_MOUSE
|
||
|
||
# You can selectively disable features in syscons.
|
||
options SC_NO_CUTPASTE
|
||
options SC_NO_FONT_LOADING
|
||
options SC_NO_HISTORY
|
||
options SC_NO_MODE_CHANGE
|
||
options SC_NO_SYSMOUSE
|
||
options SC_NO_SUSPEND_VTYSWITCH
|
||
|
||
# `flags' for sc
|
||
# 0x80 Put the video card in the VESA 800x600 dots, 16 color mode
|
||
# 0x100 Probe for a keyboard device periodically if one is not present
|
||
|
||
# Enable experimental features of the syscons terminal emulator (teken).
|
||
options TEKEN_UTF8 # UTF-8 output handling
|
||
options TEKEN_XTERM # xterm-style terminal emulation
|
||
|
||
#
|
||
# Optional devices:
|
||
#
|
||
|
||
#
|
||
# SCSI host adapters:
|
||
#
|
||
# adv: All Narrow SCSI bus AdvanSys controllers.
|
||
# adw: Second Generation AdvanSys controllers including the ADV940UW.
|
||
# aha: Adaptec 154x/1535/1640
|
||
# ahb: Adaptec 174x EISA controllers
|
||
# ahc: Adaptec 274x/284x/2910/293x/294x/394x/3950x/3960x/398X/4944/
|
||
# 19160x/29160x, aic7770/aic78xx
|
||
# ahd: Adaptec 29320/39320 Controllers.
|
||
# aic: Adaptec 6260/6360, APA-1460 (PC Card), NEC PC9801-100 (C-BUS)
|
||
# amd: Support for the AMD 53C974 SCSI host adapter chip as found on devices
|
||
# such as the Tekram DC-390(T).
|
||
# bt: Most Buslogic controllers: including BT-445, BT-54x, BT-64x, BT-74x,
|
||
# BT-75x, BT-946, BT-948, BT-956, BT-958, SDC3211B, SDC3211F, SDC3222F
|
||
# esp: NCR53c9x. Only for SBUS hardware right now.
|
||
# isp: Qlogic ISP 1020, 1040 and 1040B PCI SCSI host adapters,
|
||
# ISP 1240 Dual Ultra SCSI, ISP 1080 and 1280 (Dual) Ultra2,
|
||
# ISP 12160 Ultra3 SCSI,
|
||
# Qlogic ISP 2100 and ISP 2200 1Gb Fibre Channel host adapters.
|
||
# Qlogic ISP 2300 and ISP 2312 2Gb Fibre Channel host adapters.
|
||
# Qlogic ISP 2322 and ISP 6322 2Gb Fibre Channel host adapters.
|
||
# ispfw: Firmware module for Qlogic host adapters
|
||
# mpt: LSI-Logic MPT/Fusion 53c1020 or 53c1030 Ultra4
|
||
# or FC9x9 Fibre Channel host adapters.
|
||
# ncr: NCR 53C810, 53C825 self-contained SCSI host adapters.
|
||
# sym: Symbios/Logic 53C8XX family of PCI-SCSI I/O processors:
|
||
# 53C810, 53C810A, 53C815, 53C825, 53C825A, 53C860, 53C875,
|
||
# 53C876, 53C885, 53C895, 53C895A, 53C896, 53C897, 53C1510D,
|
||
# 53C1010-33, 53C1010-66.
|
||
# trm: Tekram DC395U/UW/F DC315U adapters.
|
||
# wds: WD7000
|
||
|
||
#
|
||
# Note that the order is important in order for Buslogic ISA/EISA cards to be
|
||
# probed correctly.
|
||
#
|
||
device bt
|
||
hint.bt.0.at="isa"
|
||
hint.bt.0.port="0x330"
|
||
device adv
|
||
hint.adv.0.at="isa"
|
||
device adw
|
||
device aha
|
||
hint.aha.0.at="isa"
|
||
device aic
|
||
hint.aic.0.at="isa"
|
||
device ahb
|
||
device ahc
|
||
device ahd
|
||
device amd
|
||
device esp
|
||
device iscsi_initiator
|
||
device isp
|
||
hint.isp.0.disable="1"
|
||
hint.isp.0.role="3"
|
||
hint.isp.0.prefer_iomap="1"
|
||
hint.isp.0.prefer_memmap="1"
|
||
hint.isp.0.fwload_disable="1"
|
||
hint.isp.0.ignore_nvram="1"
|
||
hint.isp.0.fullduplex="1"
|
||
hint.isp.0.topology="lport"
|
||
hint.isp.0.topology="nport"
|
||
hint.isp.0.topology="lport-only"
|
||
hint.isp.0.topology="nport-only"
|
||
# we can't get u_int64_t types, nor can we get strings if it's got
|
||
# a leading 0x, hence this silly dodge.
|
||
hint.isp.0.portwnn="w50000000aaaa0000"
|
||
hint.isp.0.nodewnn="w50000000aaaa0001"
|
||
device ispfw
|
||
device mpt
|
||
device ncr
|
||
device sym
|
||
device trm
|
||
device wds
|
||
hint.wds.0.at="isa"
|
||
hint.wds.0.port="0x350"
|
||
hint.wds.0.irq="11"
|
||
hint.wds.0.drq="6"
|
||
|
||
# The aic7xxx driver will attempt to use memory mapped I/O for all PCI
|
||
# controllers that have it configured only if this option is set. Unfortunately,
|
||
# this doesn't work on some motherboards, which prevents it from being the
|
||
# default.
|
||
options AHC_ALLOW_MEMIO
|
||
|
||
# Dump the contents of the ahc controller configuration PROM.
|
||
options AHC_DUMP_EEPROM
|
||
|
||
# Bitmap of units to enable targetmode operations.
|
||
options AHC_TMODE_ENABLE
|
||
|
||
# Compile in Aic7xxx Debugging code.
|
||
options AHC_DEBUG
|
||
|
||
# Aic7xxx driver debugging options. See sys/dev/aic7xxx/aic7xxx.h
|
||
options AHC_DEBUG_OPTS
|
||
|
||
# Print register bitfields in debug output. Adds ~128k to driver
|
||
# See ahc(4).
|
||
options AHC_REG_PRETTY_PRINT
|
||
|
||
# Compile in aic79xx debugging code.
|
||
options AHD_DEBUG
|
||
|
||
# Aic79xx driver debugging options. Adds ~215k to driver. See ahd(4).
|
||
options AHD_DEBUG_OPTS=0xFFFFFFFF
|
||
|
||
# Print human-readable register definitions when debugging
|
||
options AHD_REG_PRETTY_PRINT
|
||
|
||
# Bitmap of units to enable targetmode operations.
|
||
options AHD_TMODE_ENABLE
|
||
|
||
# The adw driver will attempt to use memory mapped I/O for all PCI
|
||
# controllers that have it configured only if this option is set.
|
||
options ADW_ALLOW_MEMIO
|
||
|
||
# Options used in dev/iscsi (Software iSCSI stack)
|
||
#
|
||
options ISCSI_INITIATOR_DEBUG=9
|
||
|
||
# Options used in dev/isp/ (Qlogic SCSI/FC driver).
|
||
#
|
||
# ISP_TARGET_MODE - enable target mode operation
|
||
#
|
||
options ISP_TARGET_MODE=1
|
||
#
|
||
# ISP_DEFAULT_ROLES - default role
|
||
# none=0
|
||
# target=1
|
||
# initiator=2
|
||
# both=3 (not supported currently)
|
||
#
|
||
options ISP_DEFAULT_ROLES=2
|
||
|
||
# Options used in dev/sym/ (Symbios SCSI driver).
|
||
#options SYM_SETUP_LP_PROBE_MAP #-Low Priority Probe Map (bits)
|
||
# Allows the ncr to take precedence
|
||
# 1 (1<<0) -> 810a, 860
|
||
# 2 (1<<1) -> 825a, 875, 885, 895
|
||
# 4 (1<<2) -> 895a, 896, 1510d
|
||
#options SYM_SETUP_SCSI_DIFF #-HVD support for 825a, 875, 885
|
||
# disabled:0 (default), enabled:1
|
||
#options SYM_SETUP_PCI_PARITY #-PCI parity checking
|
||
# disabled:0, enabled:1 (default)
|
||
#options SYM_SETUP_MAX_LUN #-Number of LUNs supported
|
||
# default:8, range:[1..64]
|
||
|
||
# The 'dpt' driver provides support for old DPT controllers (http://www.dpt.com/).
|
||
# These have hardware RAID-{0,1,5} support, and do multi-initiator I/O.
|
||
# The DPT controllers are commonly re-licensed under other brand-names -
|
||
# some controllers by Olivetti, Dec, HP, AT&T, SNI, AST, Alphatronic, NEC and
|
||
# Compaq are actually DPT controllers.
|
||
#
|
||
# See src/sys/dev/dpt for debugging and other subtle options.
|
||
# DPT_MEASURE_PERFORMANCE Enables a set of (semi)invasive metrics. Various
|
||
# instruments are enabled. The tools in
|
||
# /usr/sbin/dpt_* assume these to be enabled.
|
||
# DPT_HANDLE_TIMEOUTS Normally device timeouts are handled by the DPT.
|
||
# If you ant the driver to handle timeouts, enable
|
||
# this option. If your system is very busy, this
|
||
# option will create more trouble than solve.
|
||
# DPT_TIMEOUT_FACTOR Used to compute the excessive amount of time to
|
||
# wait when timing out with the above option.
|
||
# DPT_DEBUG_xxxx These are controllable from sys/dev/dpt/dpt.h
|
||
# DPT_LOST_IRQ When enabled, will try, once per second, to catch
|
||
# any interrupt that got lost. Seems to help in some
|
||
# DPT-firmware/Motherboard combinations. Minimal
|
||
# cost, great benefit.
|
||
# DPT_RESET_HBA Make "reset" actually reset the controller
|
||
# instead of fudging it. Only enable this if you
|
||
# are 100% certain you need it.
|
||
|
||
device dpt
|
||
|
||
# DPT options
|
||
#!CAM# options DPT_MEASURE_PERFORMANCE
|
||
#!CAM# options DPT_HANDLE_TIMEOUTS
|
||
options DPT_TIMEOUT_FACTOR=4
|
||
options DPT_LOST_IRQ
|
||
options DPT_RESET_HBA
|
||
|
||
#
|
||
# Compaq "CISS" RAID controllers (SmartRAID 5* series)
|
||
# These controllers have a SCSI-like interface, and require the
|
||
# CAM infrastructure.
|
||
#
|
||
device ciss
|
||
|
||
#
|
||
# Intel Integrated RAID controllers.
|
||
# This driver was developed and is maintained by Intel. Contacts
|
||
# at Intel for this driver are
|
||
# "Kannanthanam, Boji T" <boji.t.kannanthanam@intel.com> and
|
||
# "Leubner, Achim" <achim.leubner@intel.com>.
|
||
#
|
||
device iir
|
||
|
||
#
|
||
# Mylex AcceleRAID and eXtremeRAID controllers with v6 and later
|
||
# firmware. These controllers have a SCSI-like interface, and require
|
||
# the CAM infrastructure.
|
||
#
|
||
device mly
|
||
|
||
#
|
||
# Compaq Smart RAID, Mylex DAC960 and AMI MegaRAID controllers. Only
|
||
# one entry is needed; the code will find and configure all supported
|
||
# controllers.
|
||
#
|
||
device ida # Compaq Smart RAID
|
||
device mlx # Mylex DAC960
|
||
device amr # AMI MegaRAID
|
||
device amrp # SCSI Passthrough interface (optional, CAM req.)
|
||
device mfi # LSI MegaRAID SAS
|
||
device mfip # LSI MegaRAID SAS passthrough, requires CAM
|
||
options MFI_DEBUG
|
||
|
||
#
|
||
# 3ware ATA RAID
|
||
#
|
||
device twe # 3ware ATA RAID
|
||
|
||
#
|
||
# The 'ATA' driver supports all ATA and ATAPI devices, including PC Card
|
||
# devices. You only need one "device ata" for it to find all
|
||
# PCI and PC Card ATA/ATAPI devices on modern machines.
|
||
device ata
|
||
device atadisk # ATA disk drives
|
||
device ataraid # ATA RAID drives
|
||
device atapicd # ATAPI CDROM drives
|
||
device atapifd # ATAPI floppy drives
|
||
device atapist # ATAPI tape drives
|
||
device atapicam # emulate ATAPI devices as SCSI ditto via CAM
|
||
# needs CAM to be present (scbus & pass)
|
||
#
|
||
# For older non-PCI, non-PnPBIOS systems, these are the hints lines to add:
|
||
hint.ata.0.at="isa"
|
||
hint.ata.0.port="0x1f0"
|
||
hint.ata.0.irq="14"
|
||
hint.ata.1.at="isa"
|
||
hint.ata.1.port="0x170"
|
||
hint.ata.1.irq="15"
|
||
|
||
#
|
||
# The following options are valid on the ATA driver:
|
||
#
|
||
# ATA_STATIC_ID: controller numbering is static ie depends on location
|
||
# else the device numbers are dynamically allocated.
|
||
|
||
options ATA_STATIC_ID
|
||
|
||
#
|
||
# Standard floppy disk controllers and floppy tapes, supports
|
||
# the Y-E DATA External FDD (PC Card)
|
||
#
|
||
device fdc
|
||
hint.fdc.0.at="isa"
|
||
hint.fdc.0.port="0x3F0"
|
||
hint.fdc.0.irq="6"
|
||
hint.fdc.0.drq="2"
|
||
#
|
||
# FDC_DEBUG enables floppy debugging. Since the debug output is huge, you
|
||
# gotta turn it actually on by setting the variable fd_debug with DDB,
|
||
# however.
|
||
options FDC_DEBUG
|
||
#
|
||
# Activate this line if you happen to have an Insight floppy tape.
|
||
# Probing them proved to be dangerous for people with floppy disks only,
|
||
# so it's "hidden" behind a flag:
|
||
#hint.fdc.0.flags="1"
|
||
|
||
# Specify floppy devices
|
||
hint.fd.0.at="fdc0"
|
||
hint.fd.0.drive="0"
|
||
hint.fd.1.at="fdc0"
|
||
hint.fd.1.drive="1"
|
||
|
||
#
|
||
# uart: newbusified driver for serial interfaces. It consolidates the sio(4),
|
||
# sab(4) and zs(4) drivers.
|
||
#
|
||
device uart
|
||
|
||
# Options for uart(4)
|
||
options UART_PPS_ON_CTS # Do time pulse capturing using CTS
|
||
# instead of DCD.
|
||
|
||
# The following hint should only be used for pure ISA devices. It is not
|
||
# needed otherwise. Use of hints is strongly discouraged.
|
||
hint.uart.0.at="isa"
|
||
|
||
# The following 3 hints are used when the UART is a system device (i.e., a
|
||
# console or debug port), but only on platforms that don't have any other
|
||
# means to pass the information to the kernel. The unit number of the hint
|
||
# is only used to bundle the hints together. There is no relation to the
|
||
# unit number of the probed UART.
|
||
hint.uart.0.port="0x3f8"
|
||
hint.uart.0.flags="0x10"
|
||
hint.uart.0.baud="115200"
|
||
|
||
# `flags' for serial drivers that support consoles like sio(4) and uart(4):
|
||
# 0x10 enable console support for this unit. Other console flags
|
||
# (if applicable) are ignored unless this is set. Enabling
|
||
# console support does not make the unit the preferred console.
|
||
# Boot with -h or set boot_serial=YES in the loader. For sio(4)
|
||
# specifically, the 0x20 flag can also be set (see above).
|
||
# Currently, at most one unit can have console support; the
|
||
# first one (in config file order) with this flag set is
|
||
# preferred. Setting this flag for sio0 gives the old behaviour.
|
||
# 0x80 use this port for serial line gdb support in ddb. Also known
|
||
# as debug port.
|
||
#
|
||
|
||
# Options for serial drivers that support consoles:
|
||
options BREAK_TO_DEBUGGER # A BREAK on a serial console goes to
|
||
# ddb, if available.
|
||
|
||
# Solaris implements a new BREAK which is initiated by a character
|
||
# sequence CR ~ ^b which is similar to a familiar pattern used on
|
||
# Sun servers by the Remote Console. There are FreeBSD extentions:
|
||
# CR ~ ^p requests force panic and CR ~ ^r requests a clean reboot.
|
||
options ALT_BREAK_TO_DEBUGGER
|
||
|
||
# Serial Communications Controller
|
||
# Supports the Siemens SAB 82532 and Zilog Z8530 multi-channel
|
||
# communications controllers.
|
||
device scc
|
||
|
||
# PCI Universal Communications driver
|
||
# Supports various multi port PCI I/O cards.
|
||
device puc
|
||
|
||
#
|
||
# Network interfaces:
|
||
#
|
||
# MII bus support is required for some PCI 10/100 ethernet NICs,
|
||
# namely those which use MII-compliant transceivers or implement
|
||
# transceiver control interfaces that operate like an MII. Adding
|
||
# "device miibus" to the kernel config pulls in support for
|
||
# the generic miibus API and all of the PHY drivers, including a
|
||
# generic one for PHYs that aren't specifically handled by an
|
||
# individual driver.
|
||
device miibus
|
||
|
||
# an: Aironet 4500/4800 802.11 wireless adapters. Supports the PCMCIA,
|
||
# PCI and ISA varieties.
|
||
# ae: Support for gigabit ethernet adapters based on the Attansic/Atheros
|
||
# L2 PCI-Express FastEthernet controllers.
|
||
# age: Support for gigabit ethernet adapters based on the Attansic/Atheros
|
||
# L1 PCI express gigabit ethernet controllers.
|
||
# ale: Support for Atheros AR8121/AR8113/AR8114 PCIe ethernet controllers.
|
||
# bce: Broadcom NetXtreme II (BCM5706/BCM5708) PCI/PCIe Gigabit Ethernet
|
||
# adapters.
|
||
# bfe: Broadcom BCM4401 Ethernet adapter.
|
||
# bge: Support for gigabit ethernet adapters based on the Broadcom
|
||
# BCM570x family of controllers, including the 3Com 3c996-T,
|
||
# the Netgear GA302T, the SysKonnect SK-9D21 and SK-9D41, and
|
||
# the embedded gigE NICs on Dell PowerEdge 2550 servers.
|
||
# cm: Arcnet SMC COM90c26 / SMC COM90c56
|
||
# (and SMC COM90c66 in '56 compatibility mode) adapters.
|
||
# dc: Support for PCI fast ethernet adapters based on the DEC/Intel 21143
|
||
# and various workalikes including:
|
||
# the ADMtek AL981 Comet and AN985 Centaur, the ASIX Electronics
|
||
# AX88140A and AX88141, the Davicom DM9100 and DM9102, the Lite-On
|
||
# 82c168 and 82c169 PNIC, the Lite-On/Macronix LC82C115 PNIC II
|
||
# and the Macronix 98713/98713A/98715/98715A/98725 PMAC. This driver
|
||
# replaces the old al, ax, dm, pn and mx drivers. List of brands:
|
||
# Digital DE500-BA, Kingston KNE100TX, D-Link DFE-570TX, SOHOware SFA110,
|
||
# SVEC PN102-TX, CNet Pro110B, 120A, and 120B, Compex RL100-TX,
|
||
# LinkSys LNE100TX, LNE100TX V2.0, Jaton XpressNet, Alfa Inc GFC2204,
|
||
# KNE110TX.
|
||
# de: Digital Equipment DC21040
|
||
# em: Intel Pro/1000 Gigabit Ethernet 82542, 82543, 82544 based adapters.
|
||
# igb: Intel Pro/1000 PCI Express Gigabit Ethernet: 82575 and later adapters.
|
||
# ep: 3Com 3C509, 3C529, 3C556, 3C562D, 3C563D, 3C572, 3C574X, 3C579, 3C589
|
||
# and PC Card devices using these chipsets.
|
||
# ex: Intel EtherExpress Pro/10 and other i82595-based adapters,
|
||
# Olicom Ethernet PC Card devices.
|
||
# fe: Fujitsu MB86960A/MB86965A Ethernet
|
||
# fea: DEC DEFEA EISA FDDI adapter
|
||
# fpa: Support for the Digital DEFPA PCI FDDI. `device fddi' is also needed.
|
||
# fxp: Intel EtherExpress Pro/100B
|
||
# (hint of prefer_iomap can be done to prefer I/O instead of Mem mapping)
|
||
# gem: Apple GMAC/Sun ERI/Sun GEM
|
||
# hme: Sun HME (Happy Meal Ethernet)
|
||
# jme: JMicron JMC260 Fast Ethernet/JMC250 Gigabit Ethernet based adapters.
|
||
# le: AMD Am7900 LANCE and Am79C9xx PCnet
|
||
# lge: Support for PCI gigabit ethernet adapters based on the Level 1
|
||
# LXT1001 NetCellerator chipset. This includes the D-Link DGE-500SX,
|
||
# SMC TigerCard 1000 (SMC9462SX), and some Addtron cards.
|
||
# msk: Support for gigabit ethernet adapters based on the Marvell/SysKonnect
|
||
# Yukon II Gigabit controllers, including 88E8021, 88E8022, 88E8061,
|
||
# 88E8062, 88E8035, 88E8036, 88E8038, 88E8050, 88E8052, 88E8053,
|
||
# 88E8055, 88E8056 and D-Link 560T/550SX.
|
||
# lmc: Support for the LMC/SBE wide-area network interface cards.
|
||
# my: Myson Fast Ethernet (MTD80X, MTD89X)
|
||
# nge: Support for PCI gigabit ethernet adapters based on the National
|
||
# Semiconductor DP83820 and DP83821 chipset. This includes the
|
||
# SMC EZ Card 1000 (SMC9462TX), D-Link DGE-500T, Asante FriendlyNet
|
||
# GigaNIX 1000TA and 1000TPC, the Addtron AEG320T, the Surecom
|
||
# EP-320G-TX and the Netgear GA622T.
|
||
# pcn: Support for PCI fast ethernet adapters based on the AMD Am79c97x
|
||
# PCnet-FAST, PCnet-FAST+, PCnet-FAST III, PCnet-PRO and PCnet-Home
|
||
# chipsets. These can also be handled by the le(4) driver if the
|
||
# pcn(4) driver is left out of the kernel. The le(4) driver does not
|
||
# support the additional features like the MII bus and burst mode of
|
||
# the PCnet-FAST and greater chipsets though.
|
||
# re: RealTek 8139C+/8169/816xS/811xS/8101E PCI/PCIe Ethernet adapter
|
||
# rl: Support for PCI fast ethernet adapters based on the RealTek 8129/8139
|
||
# chipset. Note that the RealTek driver defaults to using programmed
|
||
# I/O to do register accesses because memory mapped mode seems to cause
|
||
# severe lockups on SMP hardware. This driver also supports the
|
||
# Accton EN1207D `Cheetah' adapter, which uses a chip called
|
||
# the MPX 5030/5038, which is either a RealTek in disguise or a
|
||
# RealTek workalike. Note that the D-Link DFE-530TX+ uses the RealTek
|
||
# chipset and is supported by this driver, not the 'vr' driver.
|
||
# sf: Support for Adaptec Duralink PCI fast ethernet adapters based on the
|
||
# Adaptec AIC-6915 "starfire" controller.
|
||
# This includes dual and quad port cards, as well as one 100baseFX card.
|
||
# Most of these are 64-bit PCI devices, except for one single port
|
||
# card which is 32-bit.
|
||
# sis: Support for NICs based on the Silicon Integrated Systems SiS 900,
|
||
# SiS 7016 and NS DP83815 PCI fast ethernet controller chips.
|
||
# sk: Support for the SysKonnect SK-984x series PCI gigabit ethernet NICs.
|
||
# This includes the SK-9841 and SK-9842 single port cards (single mode
|
||
# and multimode fiber) and the SK-9843 and SK-9844 dual port cards
|
||
# (also single mode and multimode).
|
||
# The driver will autodetect the number of ports on the card and
|
||
# attach each one as a separate network interface.
|
||
# sn: Support for ISA and PC Card Ethernet devices using the
|
||
# SMC91C90/92/94/95 chips.
|
||
# ste: Sundance Technologies ST201 PCI fast ethernet controller, includes
|
||
# the D-Link DFE-550TX.
|
||
# stge: Support for gigabit ethernet adapters based on the Sundance/Tamarack
|
||
# TC9021 family of controllers, including the Sundance ST2021/ST2023,
|
||
# the Sundance/Tamarack TC9021, the D-Link DL-4000 and ASUS NX1101.
|
||
# ti: Support for PCI gigabit ethernet NICs based on the Alteon Networks
|
||
# Tigon 1 and Tigon 2 chipsets. This includes the Alteon AceNIC, the
|
||
# 3Com 3c985, the Netgear GA620 and various others. Note that you will
|
||
# probably want to bump up kern.ipc.nmbclusters a lot to use this driver.
|
||
# tl: Support for the Texas Instruments TNETE100 series 'ThunderLAN'
|
||
# cards and integrated ethernet controllers. This includes several
|
||
# Compaq Netelligent 10/100 cards and the built-in ethernet controllers
|
||
# in several Compaq Prosignia, Proliant and Deskpro systems. It also
|
||
# supports several Olicom 10Mbps and 10/100 boards.
|
||
# tx: SMC 9432 TX, BTX and FTX cards. (SMC EtherPower II series)
|
||
# txp: Support for 3Com 3cR990 cards with the "Typhoon" chipset
|
||
# vr: Support for various fast ethernet adapters based on the VIA
|
||
# Technologies VT3043 `Rhine I' and VT86C100A `Rhine II' chips,
|
||
# including the D-Link DFE530TX (see 'rl' for DFE530TX+), the Hawking
|
||
# Technologies PN102TX, and the AOpen/Acer ALN-320.
|
||
# vx: 3Com 3C590 and 3C595
|
||
# wb: Support for fast ethernet adapters based on the Winbond W89C840F chip.
|
||
# Note: this is not the same as the Winbond W89C940F, which is a
|
||
# NE2000 clone.
|
||
# wi: Lucent WaveLAN/IEEE 802.11 PCMCIA adapters. Note: this supports both
|
||
# the PCMCIA and ISA cards: the ISA card is really a PCMCIA to ISA
|
||
# bridge with a PCMCIA adapter plugged into it.
|
||
# xe: Xircom/Intel EtherExpress Pro100/16 PC Card ethernet controller,
|
||
# Accton Fast EtherCard-16, Compaq Netelligent 10/100 PC Card,
|
||
# Toshiba 10/100 Ethernet PC Card, Xircom 16-bit Ethernet + Modem 56
|
||
# xl: Support for the 3Com 3c900, 3c905, 3c905B and 3c905C (Fast)
|
||
# Etherlink XL cards and integrated controllers. This includes the
|
||
# integrated 3c905B-TX chips in certain Dell Optiplex and Dell
|
||
# Precision desktop machines and the integrated 3c905-TX chips
|
||
# in Dell Latitude laptop docking stations.
|
||
# Also supported: 3Com 3c980(C)-TX, 3Com 3cSOHO100-TX, 3Com 3c450-TX
|
||
|
||
# Order for ISA/EISA devices is important here
|
||
|
||
device cm
|
||
hint.cm.0.at="isa"
|
||
hint.cm.0.port="0x2e0"
|
||
hint.cm.0.irq="9"
|
||
hint.cm.0.maddr="0xdc000"
|
||
device ep
|
||
device ex
|
||
device fe
|
||
hint.fe.0.at="isa"
|
||
hint.fe.0.port="0x300"
|
||
device fea
|
||
device sn
|
||
hint.sn.0.at="isa"
|
||
hint.sn.0.port="0x300"
|
||
hint.sn.0.irq="10"
|
||
device an
|
||
device wi
|
||
device xe
|
||
|
||
# PCI Ethernet NICs that use the common MII bus controller code.
|
||
device ae # Attansic/Atheros L2 FastEthernet
|
||
device age # Attansic/Atheros L1 Gigabit Ethernet
|
||
device ale # Atheros AR8121/AR8113/AR8114 Ethernet
|
||
device bce # Broadcom BCM5706/BCM5708 Gigabit Ethernet
|
||
device bfe # Broadcom BCM440x 10/100 Ethernet
|
||
device bge # Broadcom BCM570xx Gigabit Ethernet
|
||
device cxgb # Chelsio T3 10 Gigabit Ethernet
|
||
device cxgb_t3fw # Chelsio T3 10 Gigabit Ethernet firmware
|
||
device dc # DEC/Intel 21143 and various workalikes
|
||
device et # Agere ET1310 10/100/Gigabit Ethernet
|
||
device fxp # Intel EtherExpress PRO/100B (82557, 82558)
|
||
hint.fxp.0.prefer_iomap="0"
|
||
device gem # Apple GMAC/Sun ERI/Sun GEM
|
||
device hme # Sun HME (Happy Meal Ethernet)
|
||
device jme # JMicron JMC250 Gigabit/JMC260 Fast Ethernet
|
||
device lge # Level 1 LXT1001 gigabit Ethernet
|
||
device msk # Marvell/SysKonnect Yukon II Gigabit Ethernet
|
||
device my # Myson Fast Ethernet (MTD80X, MTD89X)
|
||
device nge # NatSemi DP83820 gigabit Ethernet
|
||
device re # RealTek 8139C+/8169/8169S/8110S
|
||
device rl # RealTek 8129/8139
|
||
device pcn # AMD Am79C97x PCI 10/100 NICs
|
||
device sf # Adaptec AIC-6915 (``Starfire'')
|
||
device sis # Silicon Integrated Systems SiS 900/SiS 7016
|
||
device sk # SysKonnect SK-984x & SK-982x gigabit Ethernet
|
||
device ste # Sundance ST201 (D-Link DFE-550TX)
|
||
device stge # Sundance/Tamarack TC9021 gigabit Ethernet
|
||
device tl # Texas Instruments ThunderLAN
|
||
device tx # SMC EtherPower II (83c170 ``EPIC'')
|
||
device vr # VIA Rhine, Rhine II
|
||
device wb # Winbond W89C840F
|
||
device xl # 3Com 3c90x (``Boomerang'', ``Cyclone'')
|
||
|
||
# PCI Ethernet NICs.
|
||
device de # DEC/Intel DC21x4x (``Tulip'')
|
||
device em # Intel Pro/1000 Gigabit Ethernet
|
||
device igb # Intel Pro/1000 PCIE Gigabit Ethernet
|
||
#device ixgbe # Intel Pro/10Gbe PCIE Ethernet
|
||
device le # AMD Am7900 LANCE and Am79C9xx PCnet
|
||
device mxge # Myricom Myri-10G 10GbE NIC
|
||
device nxge # Neterion Xframe 10GbE Server/Storage Adapter
|
||
device ti # Alteon Networks Tigon I/II gigabit Ethernet
|
||
device txp # 3Com 3cR990 (``Typhoon'')
|
||
device vx # 3Com 3c590, 3c595 (``Vortex'')
|
||
|
||
# PCI FDDI NICs.
|
||
device fpa
|
||
|
||
# PCI WAN adapters.
|
||
device lmc
|
||
|
||
# Use "private" jumbo buffers allocated exclusively for the ti(4) driver.
|
||
# This option is incompatible with the TI_JUMBO_HDRSPLIT option below.
|
||
#options TI_PRIVATE_JUMBOS
|
||
# Turn on the header splitting option for the ti(4) driver firmware. This
|
||
# only works for Tigon II chips, and has no effect for Tigon I chips.
|
||
options TI_JUMBO_HDRSPLIT
|
||
|
||
# These two options allow manipulating the mbuf cluster size and mbuf size,
|
||
# respectively. Be very careful with NIC driver modules when changing
|
||
# these from their default values, because that can potentially cause a
|
||
# mismatch between the mbuf size assumed by the kernel and the mbuf size
|
||
# assumed by a module. The only driver that currently has the ability to
|
||
# detect a mismatch is ti(4).
|
||
options MCLSHIFT=12 # mbuf cluster shift in bits, 12 == 4KB
|
||
options MSIZE=512 # mbuf size in bytes
|
||
|
||
#
|
||
# ATM related options (Cranor version)
|
||
# (note: this driver cannot be used with the HARP ATM stack)
|
||
#
|
||
# The `en' device provides support for Efficient Networks (ENI)
|
||
# ENI-155 PCI midway cards, and the Adaptec 155Mbps PCI ATM cards (ANA-59x0).
|
||
#
|
||
# The `hatm' device provides support for Fore/Marconi HE155 and HE622
|
||
# ATM PCI cards.
|
||
#
|
||
# The `fatm' device provides support for Fore PCA200E ATM PCI cards.
|
||
#
|
||
# The `patm' device provides support for IDT77252 based cards like
|
||
# ProSum's ProATM-155 and ProATM-25 and IDT's evaluation boards.
|
||
#
|
||
# atm device provides generic atm functions and is required for
|
||
# atm devices.
|
||
# NATM enables the netnatm protocol family that can be used to
|
||
# bypass TCP/IP.
|
||
#
|
||
# utopia provides the access to the ATM PHY chips and is required for en,
|
||
# hatm and fatm.
|
||
#
|
||
# the current driver supports only PVC operations (no atm-arp, no multicast).
|
||
# for more details, please read the original documents at
|
||
# http://www.ccrc.wustl.edu/pub/chuck/tech/bsdatm/bsdatm.html
|
||
#
|
||
device atm
|
||
device en
|
||
device fatm #Fore PCA200E
|
||
device hatm #Fore/Marconi HE155/622
|
||
device patm #IDT77252 cards (ProATM and IDT)
|
||
device utopia #ATM PHY driver
|
||
#options NATM #native ATM
|
||
|
||
options LIBMBPOOL #needed by patm, iatm
|
||
|
||
#
|
||
# Sound drivers
|
||
#
|
||
# sound: The generic sound driver.
|
||
#
|
||
|
||
device sound
|
||
|
||
#
|
||
# snd_*: Device-specific drivers.
|
||
#
|
||
# The flags of the device tells the device a bit more info about the
|
||
# device that normally is obtained through the PnP interface.
|
||
# bit 2..0 secondary DMA channel;
|
||
# bit 4 set if the board uses two dma channels;
|
||
# bit 15..8 board type, overrides autodetection; leave it
|
||
# zero if don't know what to put in (and you don't,
|
||
# since this is unsupported at the moment...).
|
||
#
|
||
# snd_ad1816: Analog Devices AD1816 ISA PnP/non-PnP.
|
||
# snd_als4000: Avance Logic ALS4000 PCI.
|
||
# snd_atiixp: ATI IXP 200/300/400 PCI.
|
||
# snd_audiocs: Crystal Semiconductor CS4231 SBus/EBus. Only
|
||
# for sparc64.
|
||
# snd_cmi: CMedia CMI8338/CMI8738 PCI.
|
||
# snd_cs4281: Crystal Semiconductor CS4281 PCI.
|
||
# snd_csa: Crystal Semiconductor CS461x/428x PCI. (except
|
||
# 4281)
|
||
# snd_ds1: Yamaha DS-1 PCI.
|
||
# snd_emu10k1: Creative EMU10K1 PCI and EMU10K2 (Audigy) PCI.
|
||
# snd_emu10kx: Creative SoundBlaster Live! and Audigy
|
||
# snd_envy24: VIA Envy24 and compatible, needs snd_spicds.
|
||
# snd_envy24ht: VIA Envy24HT and compatible, needs snd_spicds.
|
||
# snd_es137x: Ensoniq AudioPCI ES137x PCI.
|
||
# snd_ess: Ensoniq ESS ISA PnP/non-PnP, to be used in
|
||
# conjunction with snd_sbc.
|
||
# snd_fm801: Forte Media FM801 PCI.
|
||
# snd_gusc: Gravis UltraSound ISA PnP/non-PnP.
|
||
# snd_hda: Intel High Definition Audio (Controller) and
|
||
# compatible.
|
||
# snd_ich: Intel ICH AC'97 and some more audio controllers
|
||
# embedded in a chipset, for example nVidia
|
||
# nForce controllers.
|
||
# snd_maestro: ESS Technology Maestro-1/2x PCI.
|
||
# snd_maestro3: ESS Technology Maestro-3/Allegro PCI.
|
||
# snd_mss: Microsoft Sound System ISA PnP/non-PnP.
|
||
# snd_neomagic: Neomagic 256 AV/ZX PCI.
|
||
# snd_sb16: Creative SoundBlaster16, to be used in
|
||
# conjunction with snd_sbc.
|
||
# snd_sb8: Creative SoundBlaster (pre-16), to be used in
|
||
# conjunction with snd_sbc.
|
||
# snd_sbc: Creative SoundBlaster ISA PnP/non-PnP.
|
||
# Supports ESS and Avance ISA chips as well.
|
||
# snd_spicds: SPI codec driver, needed by Envy24/Envy24HT drivers.
|
||
# snd_solo: ESS Solo-1x PCI.
|
||
# snd_t4dwave: Trident 4DWave DX/NX PCI, Sis 7018 PCI and Acer Labs
|
||
# M5451 PCI.
|
||
# snd_via8233: VIA VT8233x PCI.
|
||
# snd_via82c686: VIA VT82C686A PCI.
|
||
# snd_vibes: S3 Sonicvibes PCI.
|
||
# snd_uaudio: USB audio.
|
||
|
||
device snd_ad1816
|
||
device snd_als4000
|
||
device snd_atiixp
|
||
#device snd_audiocs
|
||
device snd_cmi
|
||
device snd_cs4281
|
||
device snd_csa
|
||
device snd_ds1
|
||
device snd_emu10k1
|
||
device snd_emu10kx
|
||
device snd_envy24
|
||
device snd_envy24ht
|
||
device snd_es137x
|
||
device snd_ess
|
||
device snd_fm801
|
||
device snd_gusc
|
||
device snd_hda
|
||
device snd_ich
|
||
device snd_maestro
|
||
device snd_maestro3
|
||
device snd_mss
|
||
device snd_neomagic
|
||
device snd_sb16
|
||
device snd_sb8
|
||
device snd_sbc
|
||
device snd_solo
|
||
device snd_spicds
|
||
device snd_t4dwave
|
||
device snd_via8233
|
||
device snd_via82c686
|
||
device snd_vibes
|
||
device snd_uaudio
|
||
|
||
# For non-PnP sound cards:
|
||
hint.pcm.0.at="isa"
|
||
hint.pcm.0.irq="10"
|
||
hint.pcm.0.drq="1"
|
||
hint.pcm.0.flags="0x0"
|
||
hint.sbc.0.at="isa"
|
||
hint.sbc.0.port="0x220"
|
||
hint.sbc.0.irq="5"
|
||
hint.sbc.0.drq="1"
|
||
hint.sbc.0.flags="0x15"
|
||
hint.gusc.0.at="isa"
|
||
hint.gusc.0.port="0x220"
|
||
hint.gusc.0.irq="5"
|
||
hint.gusc.0.drq="1"
|
||
hint.gusc.0.flags="0x13"
|
||
|
||
#
|
||
# IEEE-488 hardware:
|
||
# pcii: PCIIA cards (uPD7210 based isa cards)
|
||
# tnt4882: National Instruments PCI-GPIB card.
|
||
|
||
device pcii
|
||
hint.pcii.0.at="isa"
|
||
hint.pcii.0.port="0x2e1"
|
||
hint.pcii.0.irq="5"
|
||
hint.pcii.0.drq="1"
|
||
|
||
device tnt4882
|
||
|
||
#
|
||
# Miscellaneous hardware:
|
||
#
|
||
# scd: Sony CD-ROM using proprietary (non-ATAPI) interface
|
||
# mcd: Mitsumi CD-ROM using proprietary (non-ATAPI) interface
|
||
# bktr: Brooktree bt848/848a/849a/878/879 video capture and TV Tuner board
|
||
# joy: joystick (including IO DATA PCJOY PC Card joystick)
|
||
# cmx: OmniKey CardMan 4040 pccard smartcard reader
|
||
|
||
# Mitsumi CD-ROM
|
||
device mcd
|
||
hint.mcd.0.at="isa"
|
||
hint.mcd.0.port="0x300"
|
||
# for the Sony CDU31/33A CDROM
|
||
device scd
|
||
hint.scd.0.at="isa"
|
||
hint.scd.0.port="0x230"
|
||
device joy # PnP aware, hints for non-PnP only
|
||
hint.joy.0.at="isa"
|
||
hint.joy.0.port="0x201"
|
||
device cmx
|
||
|
||
#
|
||
# The 'bktr' device is a PCI video capture device using the Brooktree
|
||
# bt848/bt848a/bt849a/bt878/bt879 chipset. When used with a TV Tuner it forms a
|
||
# TV card, e.g. Miro PC/TV, Hauppauge WinCast/TV WinTV, VideoLogic Captivator,
|
||
# Intel Smart Video III, AverMedia, IMS Turbo, FlyVideo.
|
||
#
|
||
# options OVERRIDE_CARD=xxx
|
||
# options OVERRIDE_TUNER=xxx
|
||
# options OVERRIDE_MSP=1
|
||
# options OVERRIDE_DBX=1
|
||
# These options can be used to override the auto detection
|
||
# The current values for xxx are found in src/sys/dev/bktr/bktr_card.h
|
||
# Using sysctl(8) run-time overrides on a per-card basis can be made
|
||
#
|
||
# options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_PAL
|
||
# or
|
||
# options BROOKTREE_SYSTEM_DEFAULT=BROOKTREE_NTSC
|
||
# Specifies the default video capture mode.
|
||
# This is required for Dual Crystal (28&35Mhz) boards where PAL is used
|
||
# to prevent hangs during initialisation, e.g. VideoLogic Captivator PCI.
|
||
#
|
||
# options BKTR_USE_PLL
|
||
# This is required for PAL or SECAM boards with a 28Mhz crystal and no 35Mhz
|
||
# crystal, e.g. some new Bt878 cards.
|
||
#
|
||
# options BKTR_GPIO_ACCESS
|
||
# This enable IOCTLs which give user level access to the GPIO port.
|
||
#
|
||
# options BKTR_NO_MSP_RESET
|
||
# Prevents the MSP34xx reset. Good if you initialise the MSP in another OS first
|
||
#
|
||
# options BKTR_430_FX_MODE
|
||
# Switch Bt878/879 cards into Intel 430FX chipset compatibility mode.
|
||
#
|
||
# options BKTR_SIS_VIA_MODE
|
||
# Switch Bt878/879 cards into SIS/VIA chipset compatibility mode which is
|
||
# needed for some old SiS and VIA chipset motherboards.
|
||
# This also allows Bt878/879 chips to work on old OPTi (<1997) chipset
|
||
# motherboards and motherboards with bad or incomplete PCI 2.1 support.
|
||
# As a rough guess, old = before 1998
|
||
#
|
||
# options BKTR_NEW_MSP34XX_DRIVER
|
||
# Use new, more complete initialization scheme for the msp34* soundchip.
|
||
# Should fix stereo autodetection if the old driver does only output
|
||
# mono sound.
|
||
|
||
#
|
||
# options BKTR_USE_FREEBSD_SMBUS
|
||
# Compile with FreeBSD SMBus implementation
|
||
#
|
||
# Brooktree driver has been ported to the new I2C framework. Thus,
|
||
# you'll need to have the following 3 lines in the kernel config.
|
||
# device smbus
|
||
# device iicbus
|
||
# device iicbb
|
||
# device iicsmb
|
||
# The iic and smb devices are only needed if you want to control other
|
||
# I2C slaves connected to the external connector of some cards.
|
||
#
|
||
device bktr
|
||
|
||
#
|
||
# PC Card/PCMCIA and Cardbus
|
||
#
|
||
# cbb: pci/cardbus bridge implementing YENTA interface
|
||
# pccard: pccard slots
|
||
# cardbus: cardbus slots
|
||
device cbb
|
||
device pccard
|
||
device cardbus
|
||
|
||
#
|
||
# MMC/SD
|
||
#
|
||
# mmc MMC/SD bus
|
||
# mmcsd MMC/SD memory card
|
||
# sdhci Generic PCI SD Host Controller
|
||
#
|
||
device mmc
|
||
device mmcsd
|
||
device sdhci
|
||
|
||
#
|
||
# SMB bus
|
||
#
|
||
# System Management Bus support is provided by the 'smbus' device.
|
||
# Access to the SMBus device is via the 'smb' device (/dev/smb*),
|
||
# which is a child of the 'smbus' device.
|
||
#
|
||
# Supported devices:
|
||
# smb standard I/O through /dev/smb*
|
||
#
|
||
# Supported SMB interfaces:
|
||
# iicsmb I2C to SMB bridge with any iicbus interface
|
||
# bktr brooktree848 I2C hardware interface
|
||
# intpm Intel PIIX4 (82371AB, 82443MX) Power Management Unit
|
||
# alpm Acer Aladdin-IV/V/Pro2 Power Management Unit
|
||
# ichsmb Intel ICH SMBus controller chips (82801AA, 82801AB, 82801BA)
|
||
# viapm VIA VT82C586B/596B/686A and VT8233 Power Management Unit
|
||
# amdpm AMD 756 Power Management Unit
|
||
# amdsmb AMD 8111 SMBus 2.0 Controller
|
||
# nfpm NVIDIA nForce Power Management Unit
|
||
# nfsmb NVIDIA nForce2/3/4 MCP SMBus 2.0 Controller
|
||
#
|
||
device smbus # Bus support, required for smb below.
|
||
|
||
device intpm
|
||
device alpm
|
||
device ichsmb
|
||
device viapm
|
||
device amdpm
|
||
device amdsmb
|
||
device nfpm
|
||
device nfsmb
|
||
|
||
device smb
|
||
|
||
#
|
||
# I2C Bus
|
||
#
|
||
# Philips i2c bus support is provided by the `iicbus' device.
|
||
#
|
||
# Supported devices:
|
||
# ic i2c network interface
|
||
# iic i2c standard io
|
||
# iicsmb i2c to smb bridge. Allow i2c i/o with smb commands.
|
||
#
|
||
# Supported interfaces:
|
||
# bktr brooktree848 I2C software interface
|
||
#
|
||
# Other:
|
||
# iicbb generic I2C bit-banging code (needed by lpbb, bktr)
|
||
#
|
||
device iicbus # Bus support, required for ic/iic/iicsmb below.
|
||
device iicbb
|
||
|
||
device ic
|
||
device iic
|
||
device iicsmb # smb over i2c bridge
|
||
|
||
# I2C peripheral devices
|
||
#
|
||
# ds133x Dallas Semiconductor DS1337, DS1338 and DS1339 RTC
|
||
# ds1672 Dallas Semiconductor DS1672 RTC
|
||
#
|
||
device ds133x
|
||
device ds1672
|
||
|
||
# Parallel-Port Bus
|
||
#
|
||
# Parallel port bus support is provided by the `ppbus' device.
|
||
# Multiple devices may be attached to the parallel port, devices
|
||
# are automatically probed and attached when found.
|
||
#
|
||
# Supported devices:
|
||
# vpo Iomega Zip Drive
|
||
# Requires SCSI disk support ('scbus' and 'da'), best
|
||
# performance is achieved with ports in EPP 1.9 mode.
|
||
# lpt Parallel Printer
|
||
# plip Parallel network interface
|
||
# ppi General-purpose I/O ("Geek Port") + IEEE1284 I/O
|
||
# pps Pulse per second Timing Interface
|
||
# lpbb Philips official parallel port I2C bit-banging interface
|
||
# pcfclock Parallel port clock driver.
|
||
#
|
||
# Supported interfaces:
|
||
# ppc ISA-bus parallel port interfaces.
|
||
#
|
||
|
||
options PPC_PROBE_CHIPSET # Enable chipset specific detection
|
||
# (see flags in ppc(4))
|
||
options DEBUG_1284 # IEEE1284 signaling protocol debug
|
||
options PERIPH_1284 # Makes your computer act as an IEEE1284
|
||
# compliant peripheral
|
||
options DONTPROBE_1284 # Avoid boot detection of PnP parallel devices
|
||
options VP0_DEBUG # ZIP/ZIP+ debug
|
||
options LPT_DEBUG # Printer driver debug
|
||
options PPC_DEBUG # Parallel chipset level debug
|
||
options PLIP_DEBUG # Parallel network IP interface debug
|
||
options PCFCLOCK_VERBOSE # Verbose pcfclock driver
|
||
options PCFCLOCK_MAX_RETRIES=5 # Maximum read tries (default 10)
|
||
|
||
device ppc
|
||
hint.ppc.0.at="isa"
|
||
hint.ppc.0.irq="7"
|
||
device ppbus
|
||
device vpo
|
||
device lpt
|
||
device plip
|
||
device ppi
|
||
device pps
|
||
device lpbb
|
||
device pcfclock
|
||
|
||
# Kernel BOOTP support
|
||
|
||
options BOOTP # Use BOOTP to obtain IP address/hostname
|
||
# Requires NFSCLIENT and NFS_ROOT
|
||
options BOOTP_NFSROOT # NFS mount root filesystem using BOOTP info
|
||
options BOOTP_NFSV3 # Use NFS v3 to NFS mount root
|
||
options BOOTP_COMPAT # Workaround for broken bootp daemons.
|
||
options BOOTP_WIRED_TO=fxp0 # Use interface fxp0 for BOOTP
|
||
options BOOTP_BLOCKSIZE=8192 # Override NFS block size
|
||
|
||
#
|
||
# Add software watchdog routines.
|
||
#
|
||
options SW_WATCHDOG
|
||
|
||
#
|
||
# Disable swapping of stack pages. This option removes all
|
||
# code which actually performs swapping, so it's not possible to turn
|
||
# it back on at run-time.
|
||
#
|
||
# This is sometimes usable for systems which don't have any swap space
|
||
# (see also sysctls "vm.defer_swapspace_pageouts" and
|
||
# "vm.disable_swapspace_pageouts")
|
||
#
|
||
#options NO_SWAPPING
|
||
|
||
# Set the number of sf_bufs to allocate. sf_bufs are virtual buffers
|
||
# for sendfile(2) that are used to map file VM pages, and normally
|
||
# default to a quantity that is roughly 16*MAXUSERS+512. You would
|
||
# typically want about 4 of these for each simultaneous file send.
|
||
#
|
||
options NSFBUFS=1024
|
||
|
||
#
|
||
# Enable extra debugging code for locks. This stores the filename and
|
||
# line of whatever acquired the lock in the lock itself, and change a
|
||
# number of function calls to pass around the relevant data. This is
|
||
# not at all useful unless you are debugging lock code. Also note
|
||
# that it is likely to break e.g. fstat(1) unless you recompile your
|
||
# userland with -DDEBUG_LOCKS as well.
|
||
#
|
||
options DEBUG_LOCKS
|
||
|
||
|
||
#####################################################################
|
||
# USB support
|
||
# UHCI controller
|
||
device uhci
|
||
# OHCI controller
|
||
device ohci
|
||
# EHCI controller
|
||
device ehci
|
||
# SL811 Controller
|
||
#device slhci
|
||
# General USB code (mandatory for USB)
|
||
device usb
|
||
#
|
||
# USB Double Bulk Pipe devices
|
||
device udbp
|
||
# USB Fm Radio
|
||
device ufm
|
||
# Human Interface Device (anything with buttons and dials)
|
||
device uhid
|
||
# USB keyboard
|
||
device ukbd
|
||
# USB printer
|
||
device ulpt
|
||
# USB Iomega Zip 100 Drive (Requires scbus and da)
|
||
device umass
|
||
# USB support for Belkin F5U109 and Magic Control Technology serial adapters
|
||
device umct
|
||
# USB modem support
|
||
device umodem
|
||
# USB mouse
|
||
device ums
|
||
# Diamond Rio 500 MP3 player
|
||
device urio
|
||
# USB scanners
|
||
device uscanner
|
||
#
|
||
# USB serial support
|
||
device ucom
|
||
# USB support for 3G modem cards by Option, Novatel, Huawei and Sierra
|
||
device u3g
|
||
# USB support for Technologies ARK3116 based serial adapters
|
||
device uark
|
||
# USB support for Belkin F5U103 and compatible serial adapters
|
||
device ubsa
|
||
# USB support for serial adapters based on the FT8U100AX and FT8U232AM
|
||
device uftdi
|
||
# USB support for some Windows CE based serial communication.
|
||
device uipaq
|
||
# USB support for Prolific PL-2303 serial adapters
|
||
device uplcom
|
||
# USB support for Silicon Laboratories CP2101/CP2102 based USB serial adapters
|
||
device uslcom
|
||
# USB Visor and Palm devices
|
||
device uvisor
|
||
# USB serial support for DDI pocket's PHS
|
||
device uvscom
|
||
#
|
||
# ADMtek USB ethernet. Supports the LinkSys USB100TX,
|
||
# the Billionton USB100, the Melco LU-ATX, the D-Link DSB-650TX
|
||
# and the SMC 2202USB. Also works with the ADMtek AN986 Pegasus
|
||
# eval board.
|
||
device aue
|
||
|
||
# ASIX Electronics AX88172 USB 2.0 ethernet driver. Used in the
|
||
# LinkSys USB200M and various other adapters.
|
||
device axe
|
||
|
||
#
|
||
# Devices which communicate using Ethernet over USB, particularly
|
||
# Communication Device Class (CDC) Ethernet specification. Supports
|
||
# Sharp Zaurus PDAs, some DOCSIS cable modems and so on.
|
||
device cdce
|
||
#
|
||
# CATC USB-EL1201A USB ethernet. Supports the CATC Netmate
|
||
# and Netmate II, and the Belkin F5U111.
|
||
device cue
|
||
#
|
||
# Kawasaki LSI ethernet. Supports the LinkSys USB10T,
|
||
# Entrega USB-NET-E45, Peracom Ethernet Adapter, the
|
||
# 3Com 3c19250, the ADS Technologies USB-10BT, the ATen UC10T,
|
||
# the Netgear EA101, the D-Link DSB-650, the SMC 2102USB
|
||
# and 2104USB, and the Corega USB-T.
|
||
device kue
|
||
#
|
||
# RealTek RTL8150 USB to fast ethernet. Supports the Melco LUA-KTX
|
||
# and the GREEN HOUSE GH-USB100B.
|
||
device rue
|
||
#
|
||
# Davicom DM9601E USB to fast ethernet. Supports the Corega FEther USB-TXC.
|
||
device udav
|
||
|
||
#
|
||
# ZyDas ZD1211/ZD1211B wireless ethernet driver
|
||
device zyd
|
||
#
|
||
# Ralink Technology RT2500USB chispet driver
|
||
device ural
|
||
#
|
||
# Ralink Technology RT2501USB/RT2601USB chispet driver
|
||
device rum
|
||
|
||
#
|
||
# debugging options for the USB subsystem
|
||
#
|
||
options USB_DEBUG
|
||
options U3G_DEBUG
|
||
|
||
# options for ukbd:
|
||
options UKBD_DFLT_KEYMAP # specify the built-in keymap
|
||
makeoptions UKBD_DFLT_KEYMAP=it.iso
|
||
|
||
# options for uplcom:
|
||
options UPLCOM_INTR_INTERVAL=100 # interrupt pipe interval
|
||
# in milliseconds
|
||
|
||
# options for uvscom:
|
||
options UVSCOM_DEFAULT_OPKTSIZE=8 # default output packet size
|
||
options UVSCOM_INTR_INTERVAL=100 # interrupt pipe interval
|
||
# in milliseconds
|
||
|
||
#####################################################################
|
||
# FireWire support
|
||
|
||
device firewire # FireWire bus code
|
||
device sbp # SCSI over Firewire (Requires scbus and da)
|
||
device sbp_targ # SBP-2 Target mode (Requires scbus and targ)
|
||
device fwe # Ethernet over FireWire (non-standard!)
|
||
device fwip # IP over FireWire (RFC2734 and RFC3146)
|
||
|
||
#####################################################################
|
||
# dcons support (Dumb Console Device)
|
||
|
||
device dcons # dumb console driver
|
||
device dcons_crom # FireWire attachment
|
||
options DCONS_BUF_SIZE=16384 # buffer size
|
||
options DCONS_POLL_HZ=100 # polling rate
|
||
options DCONS_FORCE_CONSOLE=0 # force to be the primary console
|
||
options DCONS_FORCE_GDB=1 # force to be the gdb device
|
||
|
||
#####################################################################
|
||
# crypto subsystem
|
||
#
|
||
# This is a port of the OpenBSD crypto framework. Include this when
|
||
# configuring IPSEC and when you have a h/w crypto device to accelerate
|
||
# user applications that link to OpenSSL.
|
||
#
|
||
# Drivers are ports from OpenBSD with some simple enhancements that have
|
||
# been fed back to OpenBSD.
|
||
|
||
device crypto # core crypto support
|
||
device cryptodev # /dev/crypto for access to h/w
|
||
|
||
device rndtest # FIPS 140-2 entropy tester
|
||
|
||
device hifn # Hifn 7951, 7781, etc.
|
||
options HIFN_DEBUG # enable debugging support: hw.hifn.debug
|
||
options HIFN_RNDTEST # enable rndtest support
|
||
|
||
device ubsec # Broadcom 5501, 5601, 58xx
|
||
options UBSEC_DEBUG # enable debugging support: hw.ubsec.debug
|
||
options UBSEC_RNDTEST # enable rndtest support
|
||
|
||
#####################################################################
|
||
|
||
|
||
#
|
||
# Embedded system options:
|
||
#
|
||
# An embedded system might want to run something other than init.
|
||
options INIT_PATH=/sbin/init:/stand/sysinstall
|
||
|
||
# Debug options
|
||
options BUS_DEBUG # enable newbus debugging
|
||
options DEBUG_VFS_LOCKS # enable VFS lock debugging
|
||
options SOCKBUF_DEBUG # enable sockbuf last record/mb tail checking
|
||
|
||
#
|
||
# Verbose SYSINIT
|
||
#
|
||
# Make the SYSINIT process performed by mi_startup() verbose. This is very
|
||
# useful when porting to a new architecture. If DDB is also enabled, this
|
||
# will print function names instead of addresses.
|
||
options VERBOSE_SYSINIT
|
||
|
||
#####################################################################
|
||
# SYSV IPC KERNEL PARAMETERS
|
||
#
|
||
# Maximum number of entries in a semaphore map.
|
||
options SEMMAP=31
|
||
|
||
# Maximum number of System V semaphores that can be used on the system at
|
||
# one time.
|
||
options SEMMNI=11
|
||
|
||
# Total number of semaphores system wide
|
||
options SEMMNS=61
|
||
|
||
# Total number of undo structures in system
|
||
options SEMMNU=31
|
||
|
||
# Maximum number of System V semaphores that can be used by a single process
|
||
# at one time.
|
||
options SEMMSL=61
|
||
|
||
# Maximum number of operations that can be outstanding on a single System V
|
||
# semaphore at one time.
|
||
options SEMOPM=101
|
||
|
||
# Maximum number of undo operations that can be outstanding on a single
|
||
# System V semaphore at one time.
|
||
options SEMUME=11
|
||
|
||
# Maximum number of shared memory pages system wide.
|
||
options SHMALL=1025
|
||
|
||
# Maximum size, in bytes, of a single System V shared memory region.
|
||
options SHMMAX=(SHMMAXPGS*PAGE_SIZE+1)
|
||
options SHMMAXPGS=1025
|
||
|
||
# Minimum size, in bytes, of a single System V shared memory region.
|
||
options SHMMIN=2
|
||
|
||
# Maximum number of shared memory regions that can be used on the system
|
||
# at one time.
|
||
options SHMMNI=33
|
||
|
||
# Maximum number of System V shared memory regions that can be attached to
|
||
# a single process at one time.
|
||
options SHMSEG=9
|
||
|
||
# Set the amount of time (in seconds) the system will wait before
|
||
# rebooting automatically when a kernel panic occurs. If set to (-1),
|
||
# the system will wait indefinitely until a key is pressed on the
|
||
# console.
|
||
options PANIC_REBOOT_WAIT_TIME=16
|
||
|
||
# Attempt to bypass the buffer cache and put data directly into the
|
||
# userland buffer for read operation when O_DIRECT flag is set on the
|
||
# file. Both offset and length of the read operation must be
|
||
# multiples of the physical media sector size.
|
||
#
|
||
options DIRECTIO
|
||
|
||
# Specify a lower limit for the number of swap I/O buffers. They are
|
||
# (among other things) used when bypassing the buffer cache due to
|
||
# DIRECTIO kernel option enabled and O_DIRECT flag set on file.
|
||
#
|
||
options NSWBUF_MIN=120
|
||
|
||
#####################################################################
|
||
|
||
# More undocumented options for linting.
|
||
# Note that documenting these are not considered an affront.
|
||
|
||
options CAM_DEBUG_DELAY
|
||
|
||
# VFS cluster debugging.
|
||
options CLUSTERDEBUG
|
||
|
||
options DEBUG
|
||
|
||
# Kernel filelock debugging.
|
||
options LOCKF_DEBUG
|
||
|
||
# System V compatible message queues
|
||
# Please note that the values provided here are used to test kernel
|
||
# building. The defaults in the sources provide almost the same numbers.
|
||
# MSGSSZ must be a power of 2 between 8 and 1024.
|
||
options MSGMNB=2049 # Max number of chars in queue
|
||
options MSGMNI=41 # Max number of message queue identifiers
|
||
options MSGSEG=2049 # Max number of message segments
|
||
options MSGSSZ=16 # Size of a message segment
|
||
options MSGTQL=41 # Max number of messages in system
|
||
|
||
options NBUF=512 # Number of buffer headers
|
||
|
||
options SCSI_NCR_DEBUG
|
||
options SCSI_NCR_MAX_SYNC=10000
|
||
options SCSI_NCR_MAX_WIDE=1
|
||
options SCSI_NCR_MYADDR=7
|
||
|
||
options SC_DEBUG_LEVEL=5 # Syscons debug level
|
||
options SC_RENDER_DEBUG # syscons rendering debugging
|
||
|
||
options SHOW_BUSYBUFS # List buffers that prevent root unmount
|
||
options SLIP_IFF_OPTS
|
||
options VFS_BIO_DEBUG # VFS buffer I/O debugging
|
||
|
||
options KSTACK_MAX_PAGES=32 # Maximum pages to give the kernel stack
|
||
|
||
# Adaptec Array Controller driver options
|
||
options AAC_DEBUG # Debugging levels:
|
||
# 0 - quiet, only emit warnings
|
||
# 1 - noisy, emit major function
|
||
# points and things done
|
||
# 2 - extremely noisy, emit trace
|
||
# items in loops, etc.
|
||
|
||
# Yet more undocumented options for linting.
|
||
# BKTR_ALLOC_PAGES has no effect except to cause warnings, and
|
||
# BROOKTREE_ALLOC_PAGES hasn't actually been superseded by it, since the
|
||
# driver still mostly spells this option BROOKTREE_ALLOC_PAGES.
|
||
##options BKTR_ALLOC_PAGES=(217*4+1)
|
||
options BROOKTREE_ALLOC_PAGES=(217*4+1)
|
||
options MAXFILES=999
|