freebsd-dev/sys/arm/ti/cpsw/if_cpswvar.h
Pedro F. Giffuni af3dc4a7ca sys/arm: further adoption of SPDX licensing ID tags.
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 15:04:10 +00:00

152 lines
4.2 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2012 Damjan Marion <dmarion@Freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _IF_CPSWVAR_H
#define _IF_CPSWVAR_H
#define CPSW_PORTS 2
#define CPSW_INTR_COUNT 4
/* MII BUS */
#define CPSW_MIIBUS_RETRIES 20
#define CPSW_MIIBUS_DELAY 100
#define CPSW_MAX_ALE_ENTRIES 1024
#define CPSW_SYSCTL_COUNT 34
#ifdef CPSW_ETHERSWITCH
#define CPSW_CPU_PORT 0
#define CPSW_PORTS_MASK 0x7
#define CPSW_VLANS 128 /* Arbitrary number. */
struct cpsw_vlangroups {
int vid;
};
#endif
struct cpsw_slot {
uint32_t bd_offset; /* Offset of corresponding BD within CPPI RAM. */
bus_dmamap_t dmamap;
struct ifnet *ifp;
struct mbuf *mbuf;
STAILQ_ENTRY(cpsw_slot) next;
};
STAILQ_HEAD(cpsw_slots, cpsw_slot);
struct cpsw_queue {
struct mtx lock;
int running;
int teardown;
struct cpsw_slots active;
struct cpsw_slots avail;
uint32_t queue_adds; /* total bufs added */
uint32_t queue_removes; /* total bufs removed */
uint32_t queue_removes_at_last_tick; /* Used by watchdog */
uint32_t queue_restart;
int queue_slots;
int active_queue_len;
int max_active_queue_len;
int avail_queue_len;
int max_avail_queue_len;
int longest_chain; /* Largest # segments in a single packet. */
int hdp_offset;
};
struct cpsw_port {
device_t dev;
int phy;
int vlan;
};
struct cpsw_softc {
device_t dev;
int active_slave;
int debug;
int dualemac;
phandle_t node;
struct bintime attach_uptime; /* system uptime when attach happened. */
struct cpsw_port port[2];
unsigned coal_us;
/* RX and TX buffer tracking */
struct cpsw_queue rx, tx;
/* We expect 1 memory resource and 4 interrupts from the device tree. */
int mem_rid;
struct resource *mem_res;
struct resource *irq_res[CPSW_INTR_COUNT];
void *ih_cookie[CPSW_INTR_COUNT];
/* A buffer full of nulls for TX padding. */
void *nullpad;
bus_dma_tag_t mbuf_dtag;
struct {
int resets;
int timer;
struct callout callout;
} watchdog;
/* 64-bit versions of 32-bit hardware statistics counters */
uint64_t shadow_stats[CPSW_SYSCTL_COUNT];
/* CPPI STATERAM has 512 slots for building TX/RX queues. */
/* TODO: Size here supposedly varies with different versions
of the controller. Check DaVinci specs and find a good
way to adjust this. One option is to have a separate
Device Tree parameter for number slots; another option
is to calculate it from the memory size in the device tree. */
struct cpsw_slot _slots[CPSW_CPPI_RAM_SIZE / sizeof(struct cpsw_cpdma_bd)];
struct cpsw_slots avail;
};
struct cpswp_softc {
device_t dev;
device_t miibus;
device_t pdev;
int media_status;
int unit;
int vlan;
struct bintime init_uptime; /* system uptime when init happened. */
struct callout mii_callout;
struct cpsw_softc *swsc;
struct ifnet *ifp;
struct mii_data *mii;
struct mtx lock;
uint32_t if_flags;
uint32_t phy;
uint32_t phyaccess;
uint32_t physel;
};
#endif /*_IF_CPSWVAR_H */