8951f05525
ioctl frontend ports.
This revision introduces two changes to CTL:
- Changes the way options are passed to CTL_LUN_REQ and CTL_PORT_REQ ioctls.
Removes ctl_be_arg structure and associated logic and replaces it with
nv(3)-based logic for passing in and out arguments.
- Allows creating multiple ioctl frontend ports using either ctladm(8) or
ctld(8).
New frontend ports are represented by /dev/cam/ctl<pp>.<vp> nodes, eg /dev/cam/ctl5.3.
Those device nodes respond only to CTL_IO ioctl.
New command-line options for ctladm:
# creates new ioctl frontend port with using free pp and vp=0
ctladm port -c
# creates new ioctl frontend port with pp=10 and vp=0
ctladm port -c -O pp=10
# creates new ioctl frontend port with pp=11 and vp=12
ctladm port -c -O pp=11 -O vp=12
# removes port with number 4 (it's a "targ_port" number, not pp number)
ctladm port -r -p 4
New syntax for ctl.conf:
target ... {
port ioctl/<pp>
...
}
target ... {
port ioctl/<pp>/<vp>
...
Note: Most of this work was made by jceel@, thank you.
Submitted by: jceel
Reworked by: myself
Reviewed by: mav (earlier versions and recently during the rework)
Obtained from: FreeNAS and TrueOS
Relnotes: Yes
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D9299
273 lines
9.7 KiB
C
273 lines
9.7 KiB
C
/*-
|
|
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
|
|
*
|
|
* Copyright (c) 2003 Silicon Graphics International Corp.
|
|
* Copyright (c) 2014-2017 Alexander Motin <mav@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions, and the following disclaimer,
|
|
* without modification.
|
|
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
|
|
* substantially similar to the "NO WARRANTY" disclaimer below
|
|
* ("Disclaimer") and any redistribution must be conditioned upon
|
|
* including a substantially similar Disclaimer requirement for further
|
|
* binary redistribution.
|
|
*
|
|
* NO WARRANTY
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
|
|
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
|
|
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
* POSSIBILITY OF SUCH DAMAGES.
|
|
*
|
|
* $Id: //depot/users/kenm/FreeBSD-test2/sys/cam/ctl/ctl_backend.h#2 $
|
|
* $FreeBSD$
|
|
*/
|
|
/*
|
|
* CTL backend driver definitions
|
|
*
|
|
* Author: Ken Merry <ken@FreeBSD.org>
|
|
*/
|
|
|
|
#ifndef _CTL_BACKEND_H_
|
|
#define _CTL_BACKEND_H_
|
|
|
|
#include <cam/ctl/ctl_ioctl.h>
|
|
#include <sys/nv.h>
|
|
|
|
typedef enum {
|
|
CTL_LUN_SERSEQ_OFF,
|
|
CTL_LUN_SERSEQ_READ,
|
|
CTL_LUN_SERSEQ_ON
|
|
} ctl_lun_serseq;
|
|
|
|
#ifdef _KERNEL
|
|
|
|
#define CTL_BACKEND_DECLARE(name, driver) \
|
|
static int name ## _modevent(module_t mod, int type, void *data) \
|
|
{ \
|
|
switch (type) { \
|
|
case MOD_LOAD: \
|
|
return (ctl_backend_register( \
|
|
(struct ctl_backend_driver *)data)); \
|
|
break; \
|
|
case MOD_UNLOAD: \
|
|
return (ctl_backend_deregister( \
|
|
(struct ctl_backend_driver *)data)); \
|
|
break; \
|
|
default: \
|
|
return EOPNOTSUPP; \
|
|
} \
|
|
return 0; \
|
|
} \
|
|
static moduledata_t name ## _mod = { \
|
|
#name, \
|
|
name ## _modevent, \
|
|
(void *)&driver \
|
|
}; \
|
|
DECLARE_MODULE(name, name ## _mod, SI_SUB_CONFIGURE, SI_ORDER_FOURTH); \
|
|
MODULE_DEPEND(name, ctl, 1, 1, 1); \
|
|
MODULE_DEPEND(name, cam, 1, 1, 1)
|
|
|
|
|
|
typedef enum {
|
|
CTL_LUN_CONFIG_OK,
|
|
CTL_LUN_CONFIG_FAILURE
|
|
} ctl_lun_config_status;
|
|
|
|
typedef void (*be_callback_t)(void *be_lun);
|
|
typedef void (*be_lun_config_t)(void *be_lun,
|
|
ctl_lun_config_status status);
|
|
|
|
/*
|
|
* The lun_type field is the SCSI device type of this particular LUN. In
|
|
* general, this should be T_DIRECT, although backends will want to create
|
|
* a processor LUN, typically at LUN 0. See scsi_all.h for the defines for
|
|
* the various SCSI device types.
|
|
*
|
|
* The flags are described above.
|
|
*
|
|
* The be_lun field is the backend driver's own context that will get
|
|
* passsed back so that it can tell which LUN CTL is referencing.
|
|
*
|
|
* maxlba is the maximum accessible LBA on the LUN. Note that this is
|
|
* different from the capacity of the array. capacity = maxlba + 1
|
|
*
|
|
* blocksize is the size, in bytes, of each LBA on the LUN. In general
|
|
* this should be 512. In theory CTL should be able to handle other block
|
|
* sizes. Host application software may not deal with it very well, though.
|
|
*
|
|
* pblockexp is the log2() of number of LBAs on the LUN per physical sector.
|
|
*
|
|
* pblockoff is the lowest LBA on the LUN aligned to physical sector.
|
|
*
|
|
* ublockexp is the log2() of number of LBAs on the LUN per UNMAP block.
|
|
*
|
|
* ublockoff is the lowest LBA on the LUN aligned to UNMAP block.
|
|
*
|
|
* atomicblock is the number of blocks that can be written atomically.
|
|
*
|
|
* opttxferlen is the number of blocks that can be written in one operation.
|
|
*
|
|
* req_lun_id is the requested LUN ID. CTL only pays attention to this
|
|
* field if the CTL_LUN_FLAG_ID_REQ flag is set. If the requested LUN ID is
|
|
* not available, the LUN addition will fail. If a particular LUN ID isn't
|
|
* requested, the first available LUN ID will be allocated.
|
|
*
|
|
* serial_num is the device serial number returned in the SCSI INQUIRY VPD
|
|
* page 0x80. This should be a unique, per-shelf value. The data inside
|
|
* this field should be ASCII only, left aligned, and any unused space
|
|
* should be padded out with ASCII spaces. This field should NOT be NULL
|
|
* terminated.
|
|
*
|
|
* device_id is the T10 device identifier returned in the SCSI INQUIRY VPD
|
|
* page 0x83. This should be a unique, per-LUN value. The data inside
|
|
* this field should be ASCII only, left aligned, and any unused space
|
|
* should be padded with ASCII spaces. This field should NOT be NULL
|
|
* terminated.
|
|
*
|
|
* The lun_shutdown() method is the callback for the ctl_invalidate_lun()
|
|
* call. It is called when all outstanding I/O for that LUN has been
|
|
* completed and CTL has deleted the resources for that LUN. When the CTL
|
|
* backend gets this call, it can safely free its per-LUN resources.
|
|
*
|
|
* The lun_config_status() method is the callback for the ctl_add_lun()
|
|
* call. It is called when the LUN is successfully added, or when LUN
|
|
* addition fails. If the LUN is successfully added, the backend may call
|
|
* the ctl_enable_lun() method to enable the LUN.
|
|
*
|
|
* The be field is a pointer to the ctl_backend_driver structure, which
|
|
* contains the backend methods to be called by CTL.
|
|
*
|
|
* The ctl_lun field is for CTL internal use only, and should not be used
|
|
* by the backend.
|
|
*
|
|
* The links field is for CTL internal use only, and should not be used by
|
|
* the backend.
|
|
*/
|
|
struct ctl_be_lun {
|
|
uint8_t lun_type; /* passed to CTL */
|
|
ctl_backend_lun_flags flags; /* passed to CTL */
|
|
ctl_lun_serseq serseq; /* passed to CTL */
|
|
void *be_lun; /* passed to CTL */
|
|
uint64_t maxlba; /* passed to CTL */
|
|
uint32_t blocksize; /* passed to CTL */
|
|
uint16_t pblockexp; /* passed to CTL */
|
|
uint16_t pblockoff; /* passed to CTL */
|
|
uint16_t ublockexp; /* passed to CTL */
|
|
uint16_t ublockoff; /* passed to CTL */
|
|
uint32_t atomicblock; /* passed to CTL */
|
|
uint32_t opttxferlen; /* passed to CTL */
|
|
uint32_t req_lun_id; /* passed to CTL */
|
|
uint32_t lun_id; /* returned from CTL */
|
|
uint8_t serial_num[CTL_SN_LEN]; /* passed to CTL */
|
|
uint8_t device_id[CTL_DEVID_LEN];/* passed to CTL */
|
|
be_callback_t lun_shutdown; /* passed to CTL */
|
|
be_lun_config_t lun_config_status; /* passed to CTL */
|
|
struct ctl_backend_driver *be; /* passed to CTL */
|
|
void *ctl_lun; /* used by CTL */
|
|
nvlist_t *options; /* passed to CTL */
|
|
STAILQ_ENTRY(ctl_be_lun) links; /* used by CTL */
|
|
};
|
|
|
|
typedef enum {
|
|
CTL_BE_FLAG_NONE = 0x00, /* no flags */
|
|
CTL_BE_FLAG_HAS_CONFIG = 0x01, /* can do config reads, writes */
|
|
} ctl_backend_flags;
|
|
|
|
typedef int (*be_init_t)(void);
|
|
typedef int (*be_shutdown_t)(void);
|
|
typedef int (*be_func_t)(union ctl_io *io);
|
|
typedef void (*be_vfunc_t)(union ctl_io *io);
|
|
typedef int (*be_ioctl_t)(struct cdev *dev, u_long cmd, caddr_t addr, int flag,
|
|
struct thread *td);
|
|
typedef int (*be_luninfo_t)(void *be_lun, struct sbuf *sb);
|
|
typedef uint64_t (*be_lunattr_t)(void *be_lun, const char *attrname);
|
|
|
|
struct ctl_backend_driver {
|
|
char name[CTL_BE_NAME_LEN]; /* passed to CTL */
|
|
ctl_backend_flags flags; /* passed to CTL */
|
|
be_init_t init; /* passed to CTL */
|
|
be_shutdown_t shutdown; /* passed to CTL */
|
|
be_func_t data_submit; /* passed to CTL */
|
|
be_func_t data_move_done; /* passed to CTL */
|
|
be_func_t config_read; /* passed to CTL */
|
|
be_func_t config_write; /* passed to CTL */
|
|
be_ioctl_t ioctl; /* passed to CTL */
|
|
be_luninfo_t lun_info; /* passed to CTL */
|
|
be_lunattr_t lun_attr; /* passed to CTL */
|
|
#ifdef CS_BE_CONFIG_MOVE_DONE_IS_NOT_USED
|
|
be_func_t config_move_done; /* passed to backend */
|
|
#endif
|
|
#if 0
|
|
be_vfunc_t config_write_done; /* passed to backend */
|
|
#endif
|
|
u_int num_luns; /* used by CTL */
|
|
STAILQ_ENTRY(ctl_backend_driver) links; /* used by CTL */
|
|
};
|
|
|
|
int ctl_backend_register(struct ctl_backend_driver *be);
|
|
int ctl_backend_deregister(struct ctl_backend_driver *be);
|
|
struct ctl_backend_driver *ctl_backend_find(char *backend_name);
|
|
|
|
/*
|
|
* To add a LUN, first call ctl_add_lun(). You will get the lun_config_status()
|
|
* callback when the LUN addition has either succeeded or failed.
|
|
*
|
|
* Once you get that callback, you can then call ctl_enable_lun() to enable
|
|
* the LUN.
|
|
*/
|
|
int ctl_add_lun(struct ctl_be_lun *be_lun);
|
|
int ctl_enable_lun(struct ctl_be_lun *be_lun);
|
|
|
|
/*
|
|
* To delete a LUN, first call ctl_disable_lun(), then
|
|
* ctl_invalidate_lun(). You will get the lun_shutdown() callback when all
|
|
* I/O to the LUN has completed and the LUN has been deleted.
|
|
*/
|
|
int ctl_disable_lun(struct ctl_be_lun *be_lun);
|
|
int ctl_invalidate_lun(struct ctl_be_lun *be_lun);
|
|
|
|
/*
|
|
* To start a LUN (transition from powered off to powered on state) call
|
|
* ctl_start_lun(). To stop a LUN (transition from powered on to powered
|
|
* off state) call ctl_stop_lun().
|
|
*/
|
|
int ctl_start_lun(struct ctl_be_lun *be_lun);
|
|
int ctl_stop_lun(struct ctl_be_lun *be_lun);
|
|
|
|
/*
|
|
* Methods to notify about media and tray status changes.
|
|
*/
|
|
int ctl_lun_no_media(struct ctl_be_lun *be_lun);
|
|
int ctl_lun_has_media(struct ctl_be_lun *be_lun);
|
|
int ctl_lun_ejected(struct ctl_be_lun *be_lun);
|
|
|
|
/*
|
|
* Called on LUN HA role change.
|
|
*/
|
|
int ctl_lun_primary(struct ctl_be_lun *be_lun);
|
|
int ctl_lun_secondary(struct ctl_be_lun *be_lun);
|
|
|
|
/*
|
|
* Let the backend notify the initiators about changes.
|
|
*/
|
|
void ctl_lun_capacity_changed(struct ctl_be_lun *be_lun);
|
|
|
|
#endif /* _KERNEL */
|
|
#endif /* _CTL_BACKEND_H_ */
|
|
|
|
/*
|
|
* vim: ts=8
|
|
*/
|