freebsd-dev/sys/dev/ath/ath_hal
Adrian Chadd cf5d42d4b0 Bump this up to where it used to be.
I need to investigate this a little closer, but it seems that in noisy
environments the NF load takes longer than 5 * DELAY(10) and this is
messing up future NF calibrations. (The background: NF calibrations
begin at the value programmed in after the load has completed, so
if this is never loaded in, the NF calibrations only ever start at
the currently calibrated NF value, rather than starting at something
high (say -50.)

More investigation about the effect on 11n RX and calibration results
are needed.

Sponsored by:	Hobnob, Inc.
2011-11-09 23:28:47 +00:00
..
ah_regdomain These two are ath_hal regulatory domain updates from the Atheros 2011-07-20 12:46:58 +00:00
ar5210 Fix a corner case in the HAL debugging changes, where ah was NULL. 2011-09-30 05:17:57 +00:00
ar5211 Fix a corner case in the HAL debugging changes, where ah was NULL. 2011-09-30 05:17:57 +00:00
ar5212 The AR5413 datasheet specifies that AR_TxIntrReq should be set consistently 2011-10-25 23:28:16 +00:00
ar5312 Fix a corner case in the HAL debugging changes, where ah was NULL. 2011-09-30 05:17:57 +00:00
ar5416 Bump this up to where it used to be. 2011-11-09 23:28:47 +00:00
ar9001 Implement the first part of the BB read workaround. 2011-10-18 03:01:41 +00:00
ar9002 Tidy up the AR9287 HAL a tiny bit - fix up AR9280 references. 2011-11-09 14:30:58 +00:00
ah_debug.h Add a new flag - HAL_DEBUG_UNMASKABLE - which always logs a debug message 2011-05-11 13:22:41 +00:00
ah_decode.h Add some more OS_MARK probes to the RX DMA setup/teardown code path. 2011-04-07 13:14:51 +00:00
ah_desc.h Add some 11n bits from the if_ath_tx 11n branch: 2011-10-25 23:09:07 +00:00
ah_devid.h Merlin -> Kiwi 2011-05-26 09:16:09 +00:00
ah_diagcodes.h Reserve a new diagnostic code for the channel survey code I'll add soon. 2011-03-19 14:37:13 +00:00
ah_eeprom_9287.c Prepare for embedded use of the AR9285/AR9287. 2011-07-30 13:37:38 +00:00
ah_eeprom_9287.h Make sure the extended regdomain word is initialised. 2011-06-28 00:01:55 +00:00
ah_eeprom_v1.c Fix the eeprom set API method to return HAL_STATUS. 2011-05-14 15:12:02 +00:00
ah_eeprom_v1.h Replace Id keyword with FreeBSD keyword and set the svn props correctly. 2010-03-03 17:32:32 +00:00
ah_eeprom_v3.c Fix the eeprom set API method to return HAL_STATUS. 2011-05-14 15:12:02 +00:00
ah_eeprom_v3.h Replace Id keyword with FreeBSD keyword and set the svn props correctly. 2010-03-03 17:32:32 +00:00
ah_eeprom_v4k.c Remove the EEPROM minor >= 19 check for txgaintype; that's only needed for 2011-08-03 06:51:14 +00:00
ah_eeprom_v4k.h Bring over a pdadc calibration fix from ath9k - unused power detector 2011-04-22 10:57:46 +00:00
ah_eeprom_v14.c Introduce the FRAC_5G EEPROM parameter. 2011-07-30 13:45:12 +00:00
ah_eeprom_v14.h Introduce the FRAC_5G EEPROM parameter. 2011-07-30 13:45:12 +00:00
ah_eeprom.h Introduce the FRAC_5G EEPROM parameter. 2011-07-30 13:45:12 +00:00
ah_internal.h Introduce a work-around for issues with the AR5416 based MAC on SMP devices. 2011-11-09 22:39:44 +00:00
ah_regdomain.c Fix a corner case in the HAL debugging changes, where ah was NULL. 2011-09-30 05:17:57 +00:00
ah_regdomain.h Migrate the regulatory database definitions into separate header files 2011-03-10 03:13:56 +00:00
ah_soc.h Replace Id keyword with FreeBSD keyword and set the svn props correctly. 2010-03-03 17:32:32 +00:00
ah.c Introduce a work-around for issues with the AR5416 based MAC on SMP devices. 2011-11-09 22:39:44 +00:00
ah.h Introduce a work-around for issues with the AR5416 based MAC on SMP devices. 2011-11-09 22:39:44 +00:00