freebsd-dev/sys/sparc64/sparc64/support.S
Marius Strobl 07e6e81e2f - The firmware of Sun Fire V1280 has a misfeature of setting %wstate to
7 which corresponds to WSTATE_KMIX in OpenSolaris whenever calling into
  it which totally screws us even when restoring %wstate afterwards as
  spill/fill traps can happen while in OFW. The rather hackish OpenBSD
  approach of just setting the equivalent of WSTATE_KERNEL to 7 also is
  no option as we treat %wstate as a bit field. So in order to deal with
  this problem actually implement spill/fill handlers for %wstate 7 which
  just act as the WSTATE_KERNEL ones except of theoretically also handling
  32-bit, turn off interrupts completely so we don't even take IPIs while
  in OFW which should ensure we only take spill/fill traps at most and
  restore %wstate after calling into OFW once we have taken over the trap
  table. While at it, actually set WSTATE_{,PROM}_KMIX before calling into
  OFW just like OpenSolaris does, which should at least help testing this
  change on non-V1280.
- Remove comments referring to the %wstate usage in BSD/OS.
- Remove the no longer used RSF_ALIGN_RETRY macro.
- Correct some trap table addresses in comments.
- Ensure %wstate is set to WSTATE_KERNEL when taking over the trap table.
- Ensure PSTATE_AM is off when entering or exiting to OFW as well as that
  interrupts are also completely off when exiting to OFW as the firmware
  trap table shouldn't be used to handle our interrupts.
2010-03-21 13:09:54 +00:00

862 lines
17 KiB
ArmAsm

/*-
* Copyright (c) 2001 Jake Burkholder.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <machine/asm.h>
__FBSDID("$FreeBSD$");
#include <sys/errno.h>
#include <machine/asi.h>
#include <machine/asmacros.h>
#include <machine/fsr.h>
#include <machine/intr_machdep.h>
#include <machine/ktr.h>
#include <machine/pcb.h>
#include <machine/pstate.h>
#include <machine/wstate.h>
#include "assym.s"
.register %g2, #ignore
.register %g3, #ignore
.register %g6, #ignore
#define E /* empty */
/*
* Generate load and store instructions for the corresponding width and asi
* (or not). Note that we want to evaluate the macro args before
* concatenating, so that E really turns into nothing.
*/
#define _LD(w, a) ld ## w ## a
#define _ST(w, a) st ## w ## a
#define LD(w, a) _LD(w, a)
#define ST(w, a) _ST(w, a)
/*
* Common code for copy routines.
*
* We use large macros to generate functions for each of the copy routines.
* This allows the load and store instructions to be generated for the right
* operation, asi or not. It is possible to write an asi independent function
* but this would require 2 expensive wrs in the main loop to switch %asi.
* It would also screw up profiling (if we ever get it), but may save some I$.
* We assume that either one of dasi and sasi is empty, or that they are both
* the same (empty or non-empty). It is up to the caller to set %asi.
*/
/*
* ASI independent implementation of copystr(9).
* Used to implement copyinstr() and copystr().
*
* Return value is in %g1.
*/
#define _COPYSTR(src, dst, len, done, sa, sasi, da, dasi) \
brz len, 4f ; \
mov src, %g2 ; \
1: deccc 1, len ; \
bl,a,pn %xcc, 3f ; \
nop ; \
LD(ub, sa) [src] sasi, %g1 ; \
ST(b, da) %g1, [dst] dasi ; \
brz,pn %g1, 3f ; \
inc src ; \
ba %xcc, 1b ; \
inc dst ; \
2: mov ENAMETOOLONG, %g1 ; \
3: sub src, %g2, %g2 ; \
brnz,a done, 4f ; \
stx %g2, [done] ; \
4:
/*
* ASI independent implementation of memset(3).
* Used to implement bzero(), memset() and aszero().
*
* If the pattern is non-zero, duplicate it to fill 64 bits.
* Store bytes until dst is 8-byte aligned, then store 8 bytes.
* It has yet to be determined how much unrolling is beneficial.
* Could also read and compare before writing to minimize snoop traffic.
*
* XXX bzero() should be implemented as
* #define bzero(dst, len) (void)memset((dst), 0, (len))
* if at all.
*/
#define _MEMSET(dst, pat, len, da, dasi) \
brlez,pn len, 5f ; \
and pat, 0xff, pat ; \
brz,pt pat, 1f ; \
sllx pat, 8, %g1 ; \
or pat, %g1, pat ; \
sllx pat, 16, %g1 ; \
or pat, %g1, pat ; \
sllx pat, 32, %g1 ; \
or pat, %g1, pat ; \
.align 16 ; \
1: deccc 1, len ; \
bl,pn %xcc, 5f ; \
btst 7, dst ; \
bz,a,pt %xcc, 2f ; \
inc 1, len ; \
ST(b, da) pat, [dst] dasi ; \
ba %xcc, 1b ; \
inc dst ; \
.align 16 ; \
2: deccc 32, len ; \
bl,a,pn %xcc, 3f ; \
inc 32, len ; \
ST(x, da) pat, [dst] dasi ; \
ST(x, da) pat, [dst + 8] dasi ; \
ST(x, da) pat, [dst + 16] dasi ; \
ST(x, da) pat, [dst + 24] dasi ; \
ba %xcc, 2b ; \
inc 32, dst ; \
.align 16 ; \
3: deccc 8, len ; \
bl,a,pn %xcc, 4f ; \
inc 8, len ; \
ST(x, da) pat, [dst] dasi ; \
ba %xcc, 3b ; \
inc 8, dst ; \
.align 16 ; \
4: deccc 1, len ; \
bl,a,pn %xcc, 5f ; \
nop ; \
ST(b, da) pat, [dst] dasi ; \
ba %xcc, 4b ; \
inc 1, dst ; \
5:
/*
* ASI independent implementation of memcpy(3).
* Used to implement bcopy(), copyin(), copyout(), memcpy(), ascopy(),
* ascopyfrom() and ascopyto().
*
* Transfer bytes until dst is 8-byte aligned. If src is then also 8 byte
* aligned, transfer 8 bytes, otherwise finish with bytes. The unaligned
* case could be optimized, but it is expected that this is the uncommon
* case and of questionable value. The code to do so is also rather large
* and ugly. It has yet to be determined how much unrolling is beneficial.
*
* XXX bcopy() must also check for overlap. This is stupid.
* XXX bcopy() should be implemented as
* #define bcopy(src, dst, len) (void)memcpy((dst), (src), (len))
* if at all.
*/
#define _MEMCPY(dst, src, len, da, dasi, sa, sasi) \
1: deccc 1, len ; \
bl,pn %xcc, 6f ; \
btst 7, dst ; \
bz,a,pt %xcc, 2f ; \
inc 1, len ; \
LD(ub, sa) [src] sasi, %g1 ; \
ST(b, da) %g1, [dst] dasi ; \
inc 1, src ; \
ba %xcc, 1b ; \
inc 1, dst ; \
.align 16 ; \
2: btst 7, src ; \
bz,a,pt %xcc, 3f ; \
nop ; \
ba,a %xcc, 5f ; \
.align 16 ; \
3: deccc 32, len ; \
bl,a,pn %xcc, 4f ; \
inc 32, len ; \
LD(x, sa) [src] sasi, %g1 ; \
LD(x, sa) [src + 8] sasi, %g2 ; \
LD(x, sa) [src + 16] sasi, %g3 ; \
LD(x, sa) [src + 24] sasi, %g4 ; \
ST(x, da) %g1, [dst] dasi ; \
ST(x, da) %g2, [dst + 8] dasi ; \
ST(x, da) %g3, [dst + 16] dasi ; \
ST(x, da) %g4, [dst + 24] dasi ; \
inc 32, src ; \
ba %xcc, 3b ; \
inc 32, dst ; \
.align 16 ; \
4: deccc 8, len ; \
bl,a,pn %xcc, 5f ; \
inc 8, len ; \
LD(x, sa) [src] sasi, %g1 ; \
ST(x, da) %g1, [dst] dasi ; \
inc 8, src ; \
ba %xcc, 4b ; \
inc 8, dst ; \
.align 16 ; \
5: deccc 1, len ; \
bl,a,pn %xcc, 6f ; \
nop ; \
LD(ub, sa) [src] sasi, %g1 ; \
ST(b, da) %g1, [dst] dasi ; \
inc src ; \
ba %xcc, 5b ; \
inc dst ; \
6:
/*
* void ascopy(u_long asi, vm_offset_t src, vm_offset_t dst, size_t len)
*/
ENTRY(ascopy)
wr %o0, 0, %asi
_MEMCPY(%o2, %o1, %o3, a, %asi, a, %asi)
retl
nop
END(ascopy)
/*
* void ascopyfrom(u_long sasi, vm_offset_t src, caddr_t dst, size_t len)
*/
ENTRY(ascopyfrom)
wr %o0, 0, %asi
_MEMCPY(%o2, %o1, %o3, E, E, a, %asi)
retl
nop
END(ascopyfrom)
/*
* void ascopyto(caddr_t src, u_long dasi, vm_offset_t dst, size_t len)
*/
ENTRY(ascopyto)
wr %o1, 0, %asi
_MEMCPY(%o2, %o0, %o3, a, %asi, E, E)
retl
nop
END(ascopyto)
/*
* void aszero(u_long asi, vm_offset_t pa, size_t len)
*/
ENTRY(aszero)
wr %o0, 0, %asi
_MEMSET(%o1, %g0, %o2, a, %asi)
retl
nop
END(aszero)
/*
* int bcmp(const void *b1, const void *b2, size_t len)
*/
ENTRY(bcmp)
brz,pn %o2, 2f
clr %o3
1: ldub [%o0 + %o3], %o4
ldub [%o1 + %o3], %o5
cmp %o4, %o5
bne,pn %xcc, 2f
inc %o3
deccc %o2
bne,pt %xcc, 1b
nop
2: retl
mov %o2, %o0
END(bcmp)
/*
* void bcopy(const void *src, void *dst, size_t len)
*/
ENTRY(bcopy)
/*
* Check for overlap, and copy backwards if so.
*/
sub %o1, %o0, %g1
cmp %g1, %o2
bgeu,a,pt %xcc, 3f
nop
/*
* Copy backwards.
*/
add %o0, %o2, %o0
add %o1, %o2, %o1
1: deccc 1, %o2
bl,a,pn %xcc, 2f
nop
dec 1, %o0
ldub [%o0], %g1
dec 1, %o1
ba %xcc, 1b
stb %g1, [%o1]
2: retl
nop
/*
* Do the fast version.
*/
3: _MEMCPY(%o1, %o0, %o2, E, E, E, E)
retl
nop
END(bcopy)
/*
* void bzero(void *b, size_t len)
*/
ENTRY(bzero)
_MEMSET(%o0, %g0, %o1, E, E)
retl
nop
END(bzero)
/*
* int copystr(const void *src, void *dst, size_t len, size_t *done)
*/
ENTRY(copystr)
_COPYSTR(%o0, %o1, %o2, %o3, E, E, E, E)
retl
mov %g1, %o0
END(copystr)
/*
* void *memcpy(void *dst, const void *src, size_t len)
*/
ENTRY(memcpy)
mov %o0, %o3
_MEMCPY(%o3, %o1, %o2, E, E, E, E)
retl
nop
END(memcpy)
/*
* void *memset(void *b, int c, size_t len)
*/
ENTRY(memset)
mov %o0, %o3
_MEMSET(%o3, %o1, %o2, E, E)
retl
nop
END(memset)
.globl copy_nofault_begin
copy_nofault_begin:
nop
/*
* int copyin(const void *uaddr, void *kaddr, size_t len)
*/
ENTRY(copyin)
wr %g0, ASI_AIUP, %asi
_MEMCPY(%o1, %o0, %o2, E, E, a, %asi)
retl
clr %o0
END(copyin)
/*
* int copyinstr(const void *uaddr, void *kaddr, size_t len, size_t *done)
*/
ENTRY(copyinstr)
wr %g0, ASI_AIUP, %asi
_COPYSTR(%o0, %o1, %o2, %o3, a, %asi, E, E)
retl
mov %g1, %o0
END(copyinstr)
/*
* int copyout(const void *kaddr, void *uaddr, size_t len)
*/
ENTRY(copyout)
wr %g0, ASI_AIUP, %asi
_MEMCPY(%o1, %o0, %o2, a, %asi, E, E)
retl
clr %o0
END(copyout)
.globl copy_nofault_end
copy_nofault_end:
nop
ENTRY(copy_fault)
retl
mov EFAULT, %o0
END(copy_fault)
.globl fs_nofault_begin
fs_nofault_begin:
nop
/*
* Chatty aliases for fetch, store functions.
*/
.globl fubyte, fusword, fuword, subyte, susword, suword
.set fubyte, fuword8
.set fusword, fuword16
.set fuword, fuword64
.set subyte, suword8
.set susword, suword16
.set suword, suword64
.globl casuword32, casuword, fuptr, suptr
.set casuword, casuword64
.set fuptr, fuword64
.set suptr, suword64
/*
* int32_t casuword32(volatile int32_t *p, int32_t e, int32_t s)
*/
ENTRY(casuword32)
casa [%o0] ASI_AIUP, %o1, %o2
retl
mov %o2, %o0
END(casuword32)
/*
* int64_t casuword64(volatile int64_t *p, int64_t e, int64_t s)
*/
ENTRY(casuword64)
casxa [%o0] ASI_AIUP, %o1, %o2
retl
mov %o2, %o0
END(casuword64)
/*
* int fuword8(const void *base)
*/
ENTRY(fuword8)
retl
lduba [%o0] ASI_AIUP, %o0
END(fuword8)
/*
* int fuword16(const void *base)
*/
ENTRY(fuword16)
retl
lduha [%o0] ASI_AIUP, %o0
END(fuword16)
/*
* int32_t fuword32(const void *base)
*/
ENTRY(fuword32)
retl
lduwa [%o0] ASI_AIUP, %o0
END(fuword32)
/*
* int64_t fuword64(const void *base)
*/
ENTRY(fuword64)
retl
ldxa [%o0] ASI_AIUP, %o0
END(fuword64)
/*
* int suword8(const void *base, int word)
*/
ENTRY(suword8)
stba %o1, [%o0] ASI_AIUP
retl
clr %o0
END(suword8)
/*
* int suword16(const void *base, int word)
*/
ENTRY(suword16)
stha %o1, [%o0] ASI_AIUP
retl
clr %o0
END(suword16)
/*
* int suword32(const void *base, int32_t word)
*/
ENTRY(suword32)
stwa %o1, [%o0] ASI_AIUP
retl
clr %o0
END(suword32)
/*
* int suword64(const void *base, int64_t word)
*/
ENTRY(suword64)
stxa %o1, [%o0] ASI_AIUP
retl
clr %o0
END(suword64)
.globl fs_nofault_intr_begin
fs_nofault_intr_begin:
nop
/*
* int fuswintr(const void *base)
*/
ENTRY(fuswintr)
retl
lduha [%o0] ASI_AIUP, %o0
END(fuswintr)
/*
* int suswintr(const void *base, int word)
*/
ENTRY(suswintr)
stha %o1, [%o0] ASI_AIUP
retl
clr %o0
END(suswintr)
.globl fs_nofault_intr_end
fs_nofault_intr_end:
nop
.globl fs_nofault_end
fs_nofault_end:
nop
ENTRY(fs_fault)
retl
mov -1, %o0
END(fsfault)
.globl fas_nofault_begin
fas_nofault_begin:
/*
* int fasword8(u_long asi, uint64_t addr, uint8_t *val)
*/
ENTRY(fasword8)
wr %o0, 0, %asi
membar #Sync
lduba [%o1] %asi, %o3
membar #Sync
stb %o3, [%o2]
retl
clr %o0
END(fasword8)
/*
* int fasword16(u_long asi, uint64_t addr, uint16_t *val)
*/
ENTRY(fasword16)
wr %o0, 0, %asi
membar #Sync
lduha [%o1] %asi, %o3
membar #Sync
sth %o3, [%o2]
retl
clr %o0
END(fasword16)
/*
* int fasword32(u_long asi, uint64_t addr, uint32_t *val)
*/
ENTRY(fasword32)
wr %o0, 0, %asi
membar #Sync
lduwa [%o1] %asi, %o3
membar #Sync
stw %o3, [%o2]
retl
clr %o0
END(fasword32)
.globl fas_nofault_end
fas_nofault_end:
nop
.globl fas_fault
ENTRY(fas_fault)
retl
mov -1, %o0
END(fas_fault)
.globl fpu_fault_begin
fpu_fault_begin:
nop
/*
* void spitfire_block_copy(void *src, void *dst, size_t len)
*/
ENTRY(spitfire_block_copy)
rdpr %pil, %o3
wrpr %g0, PIL_TICK, %pil
wr %g0, ASI_BLK_S, %asi
wr %g0, FPRS_FEF, %fprs
sub PCB_REG, TF_SIZEOF, %o4
ldx [%o4 + TF_FPRS], %o5
andcc %o5, FPRS_FEF, %g0
bz,a,pt %xcc, 1f
nop
stda %f0, [PCB_REG + PCB_UFP + (0 * 64)] %asi
stda %f16, [PCB_REG + PCB_UFP + (1 * 64)] %asi
stda %f32, [PCB_REG + PCB_UFP + (2 * 64)] %asi
stda %f48, [PCB_REG + PCB_UFP + (3 * 64)] %asi
membar #Sync
andn %o5, FPRS_FEF, %o5
stx %o5, [%o4 + TF_FPRS]
ldx [PCB_REG + PCB_FLAGS], %o4
or %o4, PCB_FEF, %o4
stx %o4, [PCB_REG + PCB_FLAGS]
1: wrpr %o3, 0, %pil
ldda [%o0] %asi, %f0
add %o0, 64, %o0
sub %o2, 64, %o2
2: ldda [%o0] %asi, %f16
fsrc1 %f0, %f32
fsrc1 %f2, %f34
fsrc1 %f4, %f36
fsrc1 %f6, %f38
fsrc1 %f8, %f40
fsrc1 %f10, %f42
fsrc1 %f12, %f44
fsrc1 %f14, %f46
stda %f32, [%o1] %asi
add %o0, 64, %o0
subcc %o2, 64, %o2
bz,pn %xcc, 3f
add %o1, 64, %o1
ldda [%o0] %asi, %f0
fsrc1 %f16, %f32
fsrc1 %f18, %f34
fsrc1 %f20, %f36
fsrc1 %f22, %f38
fsrc1 %f24, %f40
fsrc1 %f26, %f42
fsrc1 %f28, %f44
fsrc1 %f30, %f46
stda %f32, [%o1] %asi
add %o0, 64, %o0
sub %o2, 64, %o2
ba,pt %xcc, 2b
add %o1, 64, %o1
3: membar #Sync
stda %f16, [%o1] %asi
membar #Sync
retl
wr %g0, 0, %fprs
END(spitfire_block_copy)
/*
* void spitfire_block_zero(void *dst, size_t len)
*/
ENTRY(spitfire_block_zero)
rdpr %pil, %o3
wrpr %g0, PIL_TICK, %pil
wr %g0, ASI_BLK_S, %asi
wr %g0, FPRS_FEF, %fprs
sub PCB_REG, TF_SIZEOF, %o4
ldx [%o4 + TF_FPRS], %o5
andcc %o5, FPRS_FEF, %g0
bz,a,pt %xcc, 1f
nop
stda %f0, [PCB_REG + PCB_UFP + (0 * 64)] %asi
stda %f16, [PCB_REG + PCB_UFP + (1 * 64)] %asi
stda %f32, [PCB_REG + PCB_UFP + (2 * 64)] %asi
stda %f48, [PCB_REG + PCB_UFP + (3 * 64)] %asi
membar #Sync
andn %o5, FPRS_FEF, %o5
stx %o5, [%o4 + TF_FPRS]
ldx [PCB_REG + PCB_FLAGS], %o4
or %o4, PCB_FEF, %o4
stx %o4, [PCB_REG + PCB_FLAGS]
1: wrpr %o3, 0, %pil
fzero %f0
fzero %f2
fzero %f4
fzero %f6
fzero %f8
fzero %f10
fzero %f12
fzero %f14
1: stda %f0, [%o0] %asi
stda %f0, [%o0 + 64] %asi
stda %f0, [%o0 + 128] %asi
stda %f0, [%o0 + 192] %asi
sub %o1, 256, %o1
brnz,pt %o1, 1b
add %o0, 256, %o0
membar #Sync
retl
wr %g0, 0, %fprs
END(spitfire_block_zero)
.globl fpu_fault_end
fpu_fault_end:
nop
.globl fpu_fault_size
.set fpu_fault_size, fpu_fault_end - fpu_fault_begin
ENTRY(longjmp)
set 1, %g3
movrz %o1, %o1, %g3
mov %o0, %g1
ldx [%g1 + _JB_FP], %g2
1: cmp %fp, %g2
bl,a,pt %xcc, 1b
restore
bne,pn %xcc, 2f
ldx [%g1 + _JB_SP], %o2
cmp %o2, %sp
blt,pn %xcc, 2f
movge %xcc, %o2, %sp
ldx [%g1 + _JB_PC], %o7
retl
mov %g3, %o0
2: PANIC("longjmp botch", %l1)
END(longjmp)
ENTRY(setjmp)
stx %sp, [%o0 + _JB_SP]
stx %o7, [%o0 + _JB_PC]
stx %fp, [%o0 + _JB_FP]
retl
clr %o0
END(setjmp)
/*
* void ofw_entry(cell_t args[])
*/
ENTRY(ofw_entry)
save %sp, -CCFSZ, %sp
SET(ofw_vec, %l7, %l6)
ldx [%l6], %l6
rdpr %pstate, %l7
andn %l7, PSTATE_AM | PSTATE_IE, %l5
wrpr %l5, 0, %pstate
SET(tba_taken_over, %l5, %l4)
brz,pn %l4, 1f
rdpr %wstate, %l5
andn %l5, WSTATE_PROM_MASK, %l3
wrpr %l3, WSTATE_PROM_KMIX, %wstate
1: call %l6
mov %i0, %o0
brz,pn %l4, 1f
nop
wrpr %g0, %l5, %wstate
1: wrpr %l7, 0, %pstate
ret
restore %o0, %g0, %o0
END(ofw_entry)
/*
* void ofw_exit(cell_t args[])
*/
ENTRY(ofw_exit)
save %sp, -CCFSZ, %sp
flushw
SET(ofw_tba, %l7, %l5)
ldx [%l5], %l5
rdpr %pstate, %l7
andn %l7, PSTATE_AM | PSTATE_IE, %l7
wrpr %l7, 0, %pstate
rdpr %wstate, %l7
andn %l7, WSTATE_PROM_MASK, %l7
wrpr %l7, WSTATE_PROM_KMIX, %wstate
wrpr %l5, 0, %tba ! restore the OFW trap table
SET(ofw_vec, %l7, %l6)
ldx [%l6], %l6
SET(kstack0 + KSTACK_PAGES * PAGE_SIZE - PCB_SIZEOF, %l7, %l0)
sub %l0, SPOFF, %fp ! setup a stack in a locked page
sub %l0, SPOFF + CCFSZ, %sp
mov AA_DMMU_PCXR, %l3 ! force primary DMMU context 0
sethi %hi(KERNBASE), %l5
stxa %g0, [%l3] ASI_DMMU
flush %l5
wrpr %g0, 0, %tl ! force trap level 0
call %l6
mov %i0, %o0
! never to return
END(ofw_exit)
#ifdef GPROF
ENTRY(user)
nop
ENTRY(btrap)
nop
ENTRY(etrap)
nop
ENTRY(bintr)
nop
ENTRY(eintr)
nop
/*
* XXX including sys/gmon.h in genassym.c is not possible due to uintfptr_t
* badness.
*/
#define GM_STATE 0x0
#define GMON_PROF_OFF 3
#define GMON_PROF_HIRES 4
.globl _mcount
.set _mcount, __cyg_profile_func_enter
ENTRY(__cyg_profile_func_enter)
SET(_gmonparam, %o3, %o2)
lduw [%o2 + GM_STATE], %o3
cmp %o3, GMON_PROF_OFF
be,a,pn %icc, 1f
nop
SET(mcount, %o3, %o2)
jmpl %o2, %g0
nop
1: retl
nop
END(__cyg_profile_func_enter)
#ifdef GUPROF
ENTRY(__cyg_profile_func_exit)
SET(_gmonparam, %o3, %o2)
lduw [%o2 + GM_STATE], %o3
cmp %o3, GMON_PROF_HIRES
be,a,pn %icc, 1f
nop
SET(mexitcount, %o3, %o2)
jmpl %o2, %g0
nop
1: retl
nop
END(__cyg_profile_func_exit)
#endif /* GUPROF */
#endif /* GPROF */